:BUS:B<x>:ESPI:CLOCk:THresholdset / query
Sets or queries the clock source threshold for the specified ESPI bus.
SCPI COMMAND REFERENCE
The Tektronix MSO54B is Tektronix's oscilloscope in the 5 Series MSO family. Its SCPI remote-control interface exposes 4661 commands across 109 subsystems - 3198 settable and 1463 queries - and every command is documented here with its parameters, accepted values, return format, and a copy-paste PyVISA example for automating test and measurement.
4,661
Commands
3,198
Settable
1,463
Queries
109
Subsystems
SCPI
Verified
2026-07-16
All commands
4661 of 4661 commands
:BUS:B<x>:LABel:nameset / query
Sets or queries the waveform label for the specified bus.
:BUS:B<x>:MANChester:HEADer:LENGthset / query
Sets or queries the Manchester header length in bits.
:BUS:B<x>:MANChester:IDLE:BITSset / query
Sets or queries the Manchester idle bit size in bits.
| Name | Type | Values | Description |
|---|---|---|---|
| bits | integer | 0 - 15 | Idle bit size in bits. |
:BUS:B<x>:MANChester:SOUrceset / query
Sets or queries the Manchester source for the specified bus.
:BUS:B<x>:MANChester:START:INDexset / query
Sets or queries the Manchester start index in bits.
:BUS:B<x>:MANChester:SYNC:SIZeset / query
Sets or queries the Manchester sync bit size in bits for the specified bus.
:BUS:B<x>:MANChester:THResholdset / query
Sets or queries the Manchester threshold for the specified bus.
:BUS:B<x>:MANChester:TOLeranceset / query
Sets or queries the tolerance bus parameter for the Manchester bus.
:BUS:B<x>:MANChester:TRANstion:ZERoset / query
Sets or queries the Manchester bus transition setting for zero, selecting falling or rising.
:BUS:B<x>:MANChester:TRAiler:LENGthset / query
Sets or queries the Manchester trailer length in bits.
:BUS:B<x>:MANChester:WORD:COUNtset / query
Sets or queries the Manchester word count in bits.
:BUS:B<x>:MANChester:WORDSIZeset / query
Sets or queries the Manchester word size in bits.
:BUS:B<x>:MANChester:parityset / query
Sets or queries the Manchester bus parity.
enum - Returns the Manchester bus parity setting.
:BUS:B<x>:MDIO:CLOCk:SOUrceset / query
Sets or queries the MDIO clock source for the specified bus.
:BUS:B<x>:MDIO:CLOCk:THResholdset / query
Sets or queries the MDIO clock source threshold for the specified bus.
:BUS:B<x>:MDIO:DATA:SOUrceset / query
Sets or queries the MDIO data source for the specified bus.
:BUS:B<x>:MDIO:DATA:THResholdset / query
Sets or queries the MDIO data source threshold for the specified bus.
:BUS:B<x>:MIL1553B:LOWTHRESHoldset / query
Sets or queries the MIL-STD-1553 lower threshold for the specified bus.
real - The MIL-STD-1553 lower threshold for the specified bus.
:BUS:B<x>:MIL1553B:POLarityset / query
Sets or queries the source polarity for the specified MIL-STD-1553 bus.
:BUS:B<x>:MIL1553B:RESPonsetime:MINimumset / query
Sets or queries the minimum response time to a valid command issued for the specified MIL-STD-1553 bus.
:BUS:B<x>:MIL1553B:SOUrceset / query
Sets or queries the source for the specified MIL-STD-1553 bus.
:BUS:B<x>:MIL1553B:THRESHoldset / query
Sets or queries the MIL-STD-1553 upper threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Upper threshold for the specified bus. |
:BUS:B<x>:NFC:APPLYDEModset / query
Sets or queries the demodulation application for the specified bus.
:BUS:B<x>:NFC:BITRateset / query
Sets or queries the bit rate for the specified NFC bus on the response lane.
:BUS:B<x>:NFC:CMD:STARTINDexset / query
Sets or queries the Manchester start index for the NFC command signal type for the specified bus.
:BUS:B<x>:NFC:CMD:THResholdset / query
Sets or queries the command threshold for the specified NFC bus.
:BUS:B<x>:NFC:CMD:TRANsition:ZERoset / query
Sets or queries the Manchester type for the NFC command signal type for the specified bus.
:BUS:B<x>:NFC:COMMand:POLarityset / query
Sets or queries the polarity for NFC Type B command signal type for the specified bus.
:BUS:B<x>:NFC:RESPonse:POLarityset / query
Sets or queries the polarity for NFC Type B response signal type for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | channel_list | - | Specifies the bus. |
:BUS:B<x>:NFC:RSP:THResholdset / query
Sets or queries the response threshold for the specified NFC bus.
:BUS:B<x>:NFC:SOUrceset / query
Sets or queries the source for the specified NFC bus.
:BUS:B<x>:NFC:START:INDexset / query
Sets or queries the Manchester start index for the specified NFC command signal type for the specified bus.
:BUS:B<x>:NFC:STDset / query
Sets or queries the standard for the specified NFC bus.
:BUS:B<x>:NFC:TOLeranceset / query
Sets or queries the tolerance for the specified NFC bus.
:BUS:B<x>:NFC:TRANsition:ZERoset / query
Sets or queries the Manchester standard convention for the specified NFC bus on the response lane.
:BUS:B<x>:NRZ:BITOrderset / query
Sets or queries the NRZ bit order for the specified bus.
:BUS:B<x>:NRZ:BITRateset / query
Sets or queries the NRZ bus bit rate for the specified bus.
:BUS:B<x>:NRZ:POLarityset / query
Sets or queries the NRZ source polarity for the specified bus.
:BUS:B<x>:NRZ:SOUrceset / query
Sets or queries the NRZ source for the specified bus.
:BUS:B<x>:NRZ:SPMI:VERsionset / query
Sets or queries the Version for the specified bus.
:BUS:B<x>:NRZ:THResholdset / query
Sets or queries the NRZ threshold for the specified bus.
real - Returns the NRZ threshold for the specified bus.
:BUS:B<x>:ONEWIRe:DATA:SOUrceset / query
Sets or queries the source for the specified ONEWIRe bus.
:BUS:B<x>:ONEWIRe:DATA:THResholdset / query
Sets or queries the ONEWIRe data source threshold for the specified bus.
:BUS:B<x>:ONEWIRe:MODeset / query
Sets or queries the mode for the specified ONEWIRe bus.
:BUS:B<x>:PARallel:ALLTHResholdsset / query
Sets or queries the threshold for all sources for the parallel bus.
:BUS:B<x>:PARallel:ALLTHResholds:APPlyset / query
Sets all of the data source thresholds to the value of the allMRefs parameter for the parallel bus.
:BUS:B<x>:PARallel:BIT<x>SOUrceset / query
Sets or queries the specified bit source for the specified parallel bus.
:BUS:B<x>:PARallel:BIT<x>SOUrce:THResholdset / query
Sets or queries the specified bit source threshold for the specified parallel bus.
:BUS:ADDNewset / query
Adds the specified bus. It creates the bus but does not display it; bus decoding and display must be enabled separately.
:BUS:B<x>:ARINC429A:BITRateset / query
Sets or queries the ARINC429 bit rate for the specified bus. Use the custom-bit-rate command if Custom is selected.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LOW | HI | CUSTom | Selects the ARINC429 bit rate setting for the bus. |
enum - Returns the current ARINC429 bit rate setting for the specified bus.
BUS:B1:ARINC429A:BITRATE LOW BUS:B1:ARINC429A:BITRATE?
Sets or queries the ARINC429 bit rate for the specified bus. Use the custom bit rate command if you select Custom.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LOW | HI | CUSTom | Selects the ARINC429 bit rate mode. |
enum - Returns the ARINC429 bit rate setting for the specified bus.
BUS:B1:ARINC429A:BITRATE LOW BUS:B1:ARINC429A:BITRATE? might return :BUS:B1:ARINC429A:BITRATE HI, indicating the bit rate is set to handle high speed signals.
:BUS:B<x>:ARINC429A:BITRate:CUSTomset / query
Sets or queries the custom ARINC429 bit rate for the specified bus. Requires option SR-AERO.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| bit rate | real | - | The ARINC429 custom bit rate for the specified bus. |
real - Returns the ARINC429 custom bit rate set for the specified bus.
BUS:B1:ARINC429A:BITRATE:CUSTOM 12500 BUS:B1:ARINC429A:BITRATE:CUSTOM?
Queries the custom ARINC429 bit rate for the specified bus. Requires option SR-AERO.
integer - Returns the ARINC429 custom bit rate for the specified bus.
BUS:B1:ARINC429A:BITRATE:CUSTOM? might return :BUS:B1:ARINC429A:BITRATE:CUSTOM 100000, indicating the bit rate is set to 100,000.
:BUS:B<x>:ARINC429A:DATAFORmatset / query
Sets or queries the format of the DATA field for the specified ARINC429 bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| format | enum | DATA | SDIDATA | SDIDATASSM | Selects the DATA field width. |
enum - Returns the current DATA field format for the specified ARINC429 bus.
BUS:B1:ARINC429A:DATAFORMAT SDIDATASSM sets Bus 1 ARINC429 DATA field width to 23 bits. BUS:B1:ARINC429A:DATAFORMAT? might return :BUS:B1:ARINC429A:DATAFORMAT DATA, indicating a DATA field width of 19 bits.
Sets or queries the format of the DATA field for the specified ARINC429 bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| format | enum | DATA | SDIDATA | SDIDATASSM | Selects the DATA field width for the ARINC429 bus. |
enum - Returns the current DATA field format for the specified ARINC429 bus.
BUS:B1:ARINC429A:DATAFORMAT SDIDATASSM BUS:B1:ARINC429A:DATAFORMAT? might return :BUS:B1:ARINC429A:DATAFORMAT DATA, indicating a DATA field width of 19 bits.
:BUS:B<x>:ARINC429A:POLARITYset / query
Sets or queries the source polarity for the specified ARINC429 bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | NORMal | INVERTed | Specifies normal or inverted polarity. |
enum - Returns the source polarity for the specified ARINC429 bus.
BUS:B3:ARINC429A:POLARITY INVERTED BUS:B2:ARINC429A:POLARITY?
Sets or queries the source polarity for the specified ARINC429 bus. The bus is specified by x; requires option SR-AERO.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | NORMal | INVERTed | Specifies normal or inverted polarity. |
enum - Returns the current source polarity for the specified ARINC429 bus.
BUS:B3:ARINC429A:POLARITY INVERTED BUS:B2:ARINC429A:POLARITY?
:BUS:B<x>:ARINC429A:SOUrceset / query
Sets or queries the source waveform for the specified ARINC429 bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform for the ARINC429 bus. |
enum - Returns the current source waveform for the specified ARINC429 bus.
BUS:B1:ARINC429A:SOUrce CH1 sets channel 1 as the source for the ARINC429 bus. BUS:B1:ARINC429A:SOUrce? might return :BUS:B1:ARINC429A:SOUrce MATH2 indicating that the source is set to MATH2.
Sets or queries the source waveform for the specified ARINC429 bus. The bus is specified by x.
enum - Returns the source waveform assigned to the specified ARINC429 bus.
BUS:B1:ARINC429A:SOUrce CH1 BUS:B1:ARINC429A:SOUrce? might return :BUS:B1:ARINC429A:SOUrce MATH2
:BUS:B<x>:ARINC429A:THRESHoldset / query
Sets or queries the ARINC429 upper threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | V | The ARINC429 upper threshold for the specified bus. |
real (V) - Returns the ARINC429 upper threshold for the specified bus.
BUS:B3:ARINC429A:THRESHOLD -200e-3 BUS:B2:ARINC429A:THRESHOLD?
Sets or queries the ARINC429 upper threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | V | The ARINC429 upper threshold for the specified bus. |
real (V) - Returns the current ARINC429 upper threshold setting for the specified bus.
BUS:B3:ARINC429A:THRESHOLD -200e-3 BUS:B2:ARINC429A:THRESHOLD?
:BUS:B<x>:AUDio:BITDelayset / query
Sets or queries the number of delay bits for the specified AUDIO bus. This command only applies to the TDM Audio type.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| delay bits | integer | - | Specifies the number of delay bits. |
integer - Returns the number of delay bits for the specified AUDIO bus.
BUS:B1:AUDIO:BITDELAY 2 BUS:B1:AUDIO:BITDELAY?
Sets or queries the number of delay bits for the specified AUDIO bus. This command only applies to the TDM Audio type.
integer - Returns the number of delay bits for the specified AUDIO bus.
BUS:B1:AUDIO:BITDELAY 2 BUS:B1:AUDIO:BITDELAY?
:BUS:B<x>:AUDio:BITOrderset / query
Specifies the bit order for the specified AUDIO bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| order | enum | MSB | LSB | Selects whether the most significant bit or least significant bit is expected first. |
BUS:B1:AUDIO:BITORDER LSB BUS:B1:AUDIO:BITORDER?
Specifies the bit order for the specified AUDIO bus. The bus is specified by x.
enum - Returns the current bit order for the specified AUDIO bus.
BUS:B1:AUDIO:BITORDER LSB BUS:B1:AUDIO:BITORDER?
:BUS:B<x>:AUDio:CLOCk:POLarityset / query
Sets or queries the clock source polarity for the specified AUDIO bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | FALL | RISE | Sets the clock polarity to falling or rising edge. |
enum - Returns the clock polarity setting for the specified AUDIO bus.
BUS:B1:AUDIO:CLOCK:POLARITY FALL BUS:B1:AUDIO:CLOCK:POLARITY?
Sets or queries the clock source polarity for the specified AUDIO bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | FALL | RISE | Sets falling edge or rising edge as the clock polarity. |
enum - Returns the clock polarity setting for the specified AUDIO bus.
BUS:B1:AUDIO:CLOCK:POLARITY FALL BUS:B1:AUDIO:CLOCK:POLARITY?
:BUS:B<x>:AUDio:CLOCk:SOUrceset / query
Sets or queries the clock source waveform for the specified AUDIO bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Clock source waveform for the audio bus. |
BUS:B1:AUDIO:CLOCK:SOURCE CH1 BUS:B1:AUDIO:CLOCK:SOURCE?
:BUS:B<x>:AUDio:CLOCk:THResholdset / query
Sets or queries the audio clock source threshold for the specified AUDIO bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | The audio clock source threshold for the specified bus. |
Sets or queries the audio clock source threshold for the specified bus. The bus is specified by x.
real - Returns the audio clock source threshold for the specified bus.
:BUS:B<x>:AUDio:DATa:POLarityset / query
Sets or queries the audio data source polarity for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | LOW | Specifies positive or negative data polarity for the audio bus. |
enum - Returns the current audio data source polarity for the specified bus.
BUS:B1:AUDIO:DATA:POLARITY LOW BUS:B1:AUDIO:DATA:POLARITY?
Sets or queries the audio data source polarity for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Specifies positive or negative data polarity for the audio bus. |
enum - Returns the audio data polarity setting for the specified bus.
BUS:B1:AUDIO:DATA:POLARITY LOW BUS:B1:AUDIO:DATA:POLARITY? might return :BUS:B1:AUDIO:POLARITY HIGH
:BUS:B<x>:AUDio:DATa:SIZeset / query
Sets or queries the number of bits per channel for the specified audio bus. This command only applies to the TDM Audio type.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| bits per word | integer | - | Specifies the number of bits per word. |
returns
Sets or queries the number of bits per channel for the specified audio bus. This command only applies to the TDM Audio type.
integer - Returns the number of bits per word for the specified audio bus.
:BUS:B<x>:AUDio:DATa:SOUrceset / query
Sets or queries the audio data source for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Audio waveform source for the bus. |
BUS:B1:AUDIO:DATA:SOURCE CH1 BUS:B1:AUDIO:DATA:SOURCE?
Sets or queries the audio data source for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Specifies the data source waveform for the audio bus. |
enum - Returns the currently selected audio data source for the specified bus.
BUS:B1:AUDIO:DATA:SOURCE CH1 sets the data source to channel 1. BUS:B1:AUDIO:DATA:SOURCE? might return :BUS:B1:AUDIO:DATA:SOURCE CH3 indicating that the data source is set to CH3.
:BUS:B<x>:AUDio:DATa:THResholdset / query
Sets or queries the audio data source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | The number of the bus. |
| threshold | real | - | The audio data source threshold value. |
Sets or queries the audio data source threshold for the specified bus. The bus is specified by x.
:BUS:B<x>:AUDio:DATa:WORDSizeset / query
Sets or queries the audio bits per word for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| NR1 | integer | - | The audio bits per word for the specified bus. |
integer - The audio bits per word for the specified bus.
BUS:B1:AUDio:DATa:WORDSize 24 BUS:B1:AUDio:DATa:WORDSize?
Sets or queries the audio bits per word for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Bus number. |
| value | integer | - | Audio bits per word for the specified bus. |
integer - Returns the audio bits per word for the specified bus.
BUS:B1:AUDio:DATa:WORDSize 24 sets the audio bits per word to 24 bits. BUS:B1:AUDio:DATa:WORDSize? might return :BUS:B1:AUDIO:DATA:WORDSIZE 24 indicating the bits per word is 24.
:BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNELset / query
Sets or queries the audio bits of sync width for the specified bus. This command only applies to the TDM Audio type and requires option SR-AUDIO.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| <NR1> | integer | - | The audio bits of sync width for the specified bus. |
returns
Sets or queries the audio bits of sync width for the specified bus. This command only applies to the TDM Audio type and requires option SR-AUDIO.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| bits | integer | - | The audio bits of sync width for the specified bus. |
integer - Returns the audio bits of sync width setting for the specified bus.
:BUS:B<x>:AUDio:FRAME:SIZeset / query
Sets or queries the number of audio channels in each frame for the specified AUDIO bus. This command applies only to the TDM Audio type and requires option SR-AUDIO.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| <NR1> | integer | - | Specifies the number of channels in each frame. |
BUS:B1:AUDIO:FRAME:SIZE 2 BUS:B1:AUDIO:FRAME:SIZE? might return :BUS:B1:AUDIO:FRAME:SIZE 8 indicating that the number of channels in each frame is set to 8.
Sets or queries the number of audio channels in each frame for the specified audio bus. This command only applies to the TDM Audio type and requires option SR-AUDIO.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | The bus number. |
| count | integer | - | The number of channels in each frame. |
integer - Returns the number of channels in each frame.
BUS:B1:AUDIO:FRAME:SIZE 2 BUS:B1:AUDIO:FRAME:SIZE?
:BUS:B<x>:AUDio:TYPeset / query
Sets or queries the audio format (type) for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | I2S | LJ | RJ | TDM | Audio format for the specified bus. |
Sets or queries the audio format (type) for the specified audio bus. The bus is specified by x.
enum - Returns the audio format for the specified audio bus.
:BUS:B<x>:AUDio:WORDSel:POLarityset / query
Sets or queries the word select source polarity for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | NORMal | INVERTed | Selects positive or negative polarity. |
enum - Returns the current word select source polarity for the specified audio bus.
BUS:B1:AUDIO:WORDSEL:POLARITY NORMal sets normal as the word select polarity. BUS:B1:AUDIO:WORDSEl:POLARITY? might return :BUS:B1:AUDIO:WORDSEL:POLARITY NORMAL indicating that the word select polarity is set to normal.
Sets or queries the word select source polarity for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | NORMal | INVERTed | Specifies positive or negative word select polarity. |
enum - Returns the current word select polarity setting.
BUS:B1:AUDIO:WORDSEL:POLARITY NORMal sets normal as the word select polarity. BUS:B1:AUDIO:WORDSEl:POLARITY? might return :BUS:B1:AUDIO:WORDSEL:POLARITY NORMAL indicating that the word select polarity is set to normal.
:BUS:B<x>:AUDio:WORDSel:SOUrceset / query
Sets or queries the audio word select source waveform for the specified audio bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Audio word select source waveform for the specified bus. |
Queries the word select source for the specified audio bus. The source may be a channel, math waveform, reference waveform, or digital reference waveform.
enum - Returns the current word select source for the audio bus.
BUS:B1:AUDIO:WORDSEL:SOURCE CH1 sets CH1 as the word select source. BUS:B1:AUDIO:WORDSEL:SOURCE? might return :BUS:B1:AUDIO:WORDSEL:SOURCE CH2 indicating that the word select source is set to CH2.
:BUS:B<x>:AUDio:WORDSel:THResholdset / query
Sets or queries the audio word select source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| b<x> | - | - | The bus number. |
| threshold | real | - | The audio word select source threshold for the specified bus. |
BUS:B4:AUDIO:WORDSEL:THRESHOLD 300.0E-3 BUS:B1:AUDIO:WORDSEL:THRESHOLD?
Sets or queries the audio word select source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Audio word select source threshold for the specified bus. |
real (V) - Returns the audio word select source threshold for the specified bus.
BUS:B4:AUDIO:WORDSEL:THRESHOLD 300.0E-3 sets the Bus 4 audio word select source threshold to 300 mV. BUS:B1:AUDIO:WORDSEL:THRESHOLD? might return :BUS:B1:AUDIO:WORDSEL:THRESHOLD 1.25 indicates the Bus 1 audio word select source threshold is set to 1.25 V.
:BUS:B<x>:AUTOETHERnet:BITRateset / query
Sets or queries the bitrate for Auto Ethernet Bus with speed 10Base-T1S.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
| bitrate | numeric | - | Bit input for the rate argument. |
numeric - Bitrate for the Auto Ethernet bus with speed 10Base-T1S.
Sets or queries the bitrate for Auto Ethernet Bus with speed 10Base-T1S. The bus is specified by x.
real - Returns the bitrate for the specified Auto Ethernet Bus.
:BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLDset / query
Sets or queries the AutoEthernet D– source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | AutoEthernet D– source threshold level for the specified bus. |
real (V) - The AutoEthernet D– source threshold level for the specified bus.
BUS:B3:AUTOETHERnet:DATAMINUSTHRESHOLD 250.0E-3 BUS:B2:AUTOETHERnet:DATAMINUSTHRESHOLD? might return BUS:B2:AUTOETHERnet:DATAMINUSTHRESHOLD 1.0
Sets or queries the AutoEthernet D– source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | AutoEthernet D– source threshold level for the specified bus. |
real (V) - The AutoEthernet D– source threshold level for the specified bus, in volts.
BUS:B3:AUTOETHERnet:DATAMINUSTHRESHOLD 250.0E-3 BUS:B2:AUTOETHERnet:DATAMINUSTHRESHOLD?
:BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHoldset / query
Sets or queries the AutoEthernet D+ source threshold level for the specified bus. This threshold applies only when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | discrete | - | Bus number. |
| threshold | real | V | AutoEthernet D+ source threshold level for the specified bus. |
Sets or queries the AutoEthernet D+ source threshold level for the specified bus. This threshold applies only when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
| NR3 | real | V | AutoEthernet D+ source threshold level for the specified bus. |
real (V) - Returns the AutoEthernet D+ source threshold level for the specified bus, in volts.
:BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHOLDset / query
Sets the AutoEthernet D+ source threshold for the specified bus. This threshold applies only when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | AutoEthernet D+ source threshold for the specified bus. |
BUS:B3:AUTOEthernet:DATAPLUSTHRESHOLD 250.0E-3 BUS:B2:AUTOEthernet:DATAPLUSTHRESHOLD?
:BUS:B<x>:AUTOETHERnet:LOWDATAMINusset / query
Sets or queries the AutoEthernet D– source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The Bus number. |
| threshold | real | V | AutoEthernet D– source low threshold level for the specified bus. |
BUS:B1:AUTOEthernet:LOWDATAMINus 250.0E-3 BUS:B2:AUTOEthernet:LOWDATAMINus?
:BUS:B<x>:AUTOETHERnet:LOWDATAPLUSset / query
Sets or queries the AutoEthernet D+ source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | AutoEthernet D+ source low threshold level for the specified bus. |
BUS:B1:AUTOETHERnet:LOWDATAPLUS 250.0E-3 BUS:B2:AUTOETHERnet:LOWDATAPLUS?
:BUS:B<x>:AUTOETHERnet:LOWTHRESHoldset / query
Sets or queries the AutoEthernet Data source low threshold level for the specified bus. This threshold applies only when the AutoEthernet signal type is differential.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| <NR3> | real | V | AutoEthernet DATA source low threshold level for the specified bus, in volts. |
BUS:B1:AUTOETHERnet:LOWTHRESHold -200e-3 BUS:B3:AUTOETHERnet:LOWTHRESHold? might return BUS:B3:AUTOETHERnet:LOWTHRESHOLD -500.0000E-3
:BUS:B<x>:AUTOETHERnet:PACKetviewset / query
Sets or queries the packet view for the decode on the specified bus. ON turns packet view on; OFF turns it off.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| state | enum | ON | OFF | Turns packet view on or off. |
BUS:B1:AUTOETHERnet:PACKetviewOFF BUS:B1:AUTOETHERnet:PACKetview?
:BUS:B<x>:AUTOETHERnet:SIGNALTYpeset / query
Sets or queries the AutoEthernet signal type for the specified bus. The signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| signal type | enum | SINGLE | DIFF | Selects single-ended or differential signals. |
enum - Returns the AutoEthernet signal type for the specified bus.
BUS:B4:AUTOETHERnet:SIGNALTYpe SINGLE BUS:B3:AUTOETHERnet:SIGNALTYpe?
:BUS:B<x>:AUTOETHERnet:SOUrceset / query
Sets or queries the AutoEthernet source for the specified bus. The source may be an analog channel, math channel, or reference waveform used for differential input.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | AutoEthernet data source for the bus. |
BUS:B5:AUTOETHERnet:SOURCE CH4 BUS:B1:AUTOETHERnet:SOURCE?
:BUS:B<x>:AUTOETHERnet:SOUrce:DMINusset / query
Sets or queries the AutoEthernet D– source for the specified bus. It specifies the source channel used when the signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source used for the AutoEthernet D– signal. |
:BUS:B<x>:AUTOETHERnet:SOUrce:DPLUsset / query
Sets or queries the AutoEthernet D+ source for the specified bus. It specifies the source channel to use when the signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source channel for the D+ signal. |
enum - Returns the current AutoEthernet D+ source selection for the specified bus.
BUS:B2:AUTOETHERnet:SOUrce:DPLUs CH5 BUS:B1:AUTOETHERnet:SOUrce:DPLUs?
:BUS:B<x>:AUTOETHERnet:TBT1s:MTHResholdset / query
Sets or queries the AutoEthernet 10 Base-T1S math source threshold for the specified bus. The threshold is specified in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | AutoEthernet D+ source threshold for the specified bus. |
:BUS:B<x>:AUTOETHERnet:TENBASET1S:THRESHoldset / query
Sets or queries the AutoEthernet Bus with speed 10 Base-T1S differential source threshold for the specified bus. It accepts a numeric threshold in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | AutoEthernet source threshold for the specified bus. |
real (V) - Returns the AutoEthernet source threshold level for the specified bus.
BUS:B3:AUTOETHERnet:TENBASET1S:THRESHold 250.0E-3 BUS:B2:AUTOETHERnet:TENBASET1S:THRESHold?
:BUS:B<x>:AUTOETHERnet:THRESHoldset / query
Sets or queries the AutoEthernet DATA source high threshold level for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | AutoEthernet source threshold for the specified bus, in volts. |
real (V) - Returns the AutoEthernet threshold level for the specified bus, in volts.
BUS:B3:AUTOETHERnet:THRESHold 250.0E-3 BUS:B2:AUTOETHERnet:THRESHold?
:BUS:B<x>:AUTOETHERnet:TYPeset / query
Sets or queries the AutoEthernet standard speed for the specified bus. The signal type is single ended and this command requires the SR-AUTOENET option.
enum - Returns the current AutoEthernet speed setting.
BUS:B1:AUTOETHERnet:TYPE HUNDREDBASET1 specifies the AutoEthernet speed as 100Base-T1. BUS:B3:AUTOETHERnet:TYPE? might return BUS:B3:AUTOETHERnet:TYPE HUNDREDBASET1, indicating that the AutoEthernet speed is 100Base-T1 for Bus 3.
:BUS:B<x>:CAN:BITRateset / query
Sets or queries the CAN bit rate for the specified bus. If Custom is selected, use BUS:B<x>:CAN:BITRate:VALue to set the bit rate.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Bus number. |
| rate | enum | RATE10K | RATE100K | RATE1M | RATE125K | RATE153K | RATE20K | RATE25K | RATE250K | RATE31K | RATE33K | RATE400K | RATE50K | RATE500K | RATE62K | RATE68K | RATE800K | RATE83K | RATE92K | CUSTom | CAN bit rate setting. |
:BUS:B<x>:CAN:BITRate:VALueset / query
Sets or queries the CAN bit rate value for a bus when Custom is selected by BUS:B<x>:CAN:BITRate. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Bus number. |
| value | real | - | CAN bit rate value. |
real - Returns the CAN bit rate value when queried.
BUS:B1:CAN:BITRate RATE1M sets the CAN bit rate to 1 Mb. BUS:B1:CAN:BITRate? might return BUS:B1:CAN:BITRATE RATE500K, indicating the CAN bit rate is set to 500 k.
:BUS:B<x>:CAN:FD:BITRateset / query
Sets or queries the increased data phase bit rate used by CAN FD packets on the specified CAN bus. Use BUS:B<x>:CAN:FD:BITRate:CUSTom if you select Custom.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RATE1M | RATE2M | RATE3M | RATE4M | RATE5M | RATE6M | RATE7M | RATE8M | RATE9M | RATE10M | RATE11M | RATE12M | RATE13M | RATE14M | RATE15M | RATE16M | CUSTom | Selects the CAN FD data phase bit rate. |
enum - Returns the currently selected CAN FD bit rate as one of the documented rate keywords.
BUS:B1:CAN:FD:BITRate RATE1M BUS:B1:CAN:FD:BITRate?
:BUS:B<x>:CAN:FD:BITRate:CUSTomset / query
Sets or queries the custom bit rate for the increased data phase of CAN FD packets on the specified CAN bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | - | Custom FD bit rate for the specified bus. |
real - Returns the custom FD bit rate for the specified bus.
BUS:B1:CAN:FD:BITRATE:CUSTOM 1000000 BUS:B1:CAN:FD:BITRATE:CUSTOM?
:BUS:B<x>:CAN:SAMPLEpointset / query
Sets or queries the sample point for the specified CAN bus. The bus is specified by x.
:BUS:B<x>:CAN:SIGNalset / query
Sets or queries the signal type for the specified CAN bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DIFFerential | CANH | CANL | RX | TX | Signal type to use for the specified CAN bus. |
enum - Returns the current signal type for the specified CAN bus.
:BUS:B<x>:CAN:SOUrceset / query
Sets or queries the CAN source channel for the specified CAN bus. The bus number is specified by x.
:BUS:B<x>:CAN:STANDardset / query
Sets or queries which CAN standard specification to analyze the specified CAN bus with. The bus is specified by x.
enum - Returns the current CAN standard setting for the specified bus.
BUS:B1:CAN:STANDARD FDISO sets the CAN standard to ISO CAN FD. BUS:B1:CAN:STANDARD? might return BUS:B1:CAN:STANDARD CAN2X, indicating that the CAN standard is CAN 2.0.
:BUS:B<x>:CAN:THResholdset / query
Sets or queries the source channel threshold for the specified CAN bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | V | The source channel threshold for the specified CAN bus. |
real (V) - Returns the source channel threshold for the specified CAN bus.
BUS:B1:CAN:THReshold 5 BUS:B1:CAN:THReshold?
:BUS:B<x>:CAN:XL:BITRateset / query
Sets or queries the bit rate for the CAN XL bus specified by x. The valid range is 1000000 to 20000000, and the default is 4000000.
| Name | Type | Values | Description |
|---|---|---|---|
| bit rate | integer | 1000000 - 20000000 | Specifies the CAN XL data transfer bit rate. |
integer - Returns the CAN XL data transfer bit rate setting.
BUS:B1:CAN:XL:BITRate 1000000 BUS:B1:CAN:XL:BITRate?
:BUS:B<x>:CAN:XL:BITRate:CUSTomset / query
Sets or queries the CAN XL custom bit rate for the specified bus. The valid range is 500000 to 20000000, with a default value of 4000000.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 500000 - 20000000 | CAN XL data transfer custom bit rate. |
integer - Returns the current CAN XL custom bit rate.
BUS:B1:CAN:XL:BITRate:CUSTom 1000000 BUS:B1:CAN:XL:BITRate:CUSTom?
:BUS:B<x>:CPHY:AB:SOUrceset / query
Sets or queries the CPHY differential AB source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the CPHY differential AB source as an analog/digital channel, math channel, or reference waveform. |
enum - Returns the currently selected CPHY differential AB source.
BUS:B1:CPHY:AB:SOUrce Ch1 sets the source to channel 1. BUS:B1:CPHY:AB:SOUrce? might return BUS:B1:CPHY:AB:SOUrce CH1, indicating the source is set to channel 1.
:BUS:B<x>:CPHY:A:DATA:THRESHoldset / query
Sets or queries the CPHY Single Ended A source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 - +8 | The CPHY Single Ended A threshold in Volts for the specified bus. |
real (V) - Returns the CPHY Single Ended A threshold for the specified bus in Volts.
BUS:B4:CPHY:A:DATA:THRESHold 1.0 sets the Bus 4 CPHY threshold to 1.0 V. BUS:B3:CPHY:A:DATA:THRESHold? might return BUS:B3:CPHY:A:DATA:THRESHold 100.00000E-3, indicating the Bus 3 CPHY threshold is set to 100.0 mV.
:BUS:B<x>:CPHY:AB:THResholdset / query
Sets or queries the CPHY differential AB threshold for the specified bus. The bus is specified by x and the threshold range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Number of the bus. |
| threshold | real | -8 - +8 | CPHY differential AB threshold for the specified bus. |
string - Might return the command followed by the current CPHY AB threshold value for the specified bus.
BUS:B4:CPHY:AB:THReshold 1.0 BUS:B4:CPHY:AB:THReshold?
:BUS:B<x>:CPHY:AGND:SOUrceset / query
Sets or queries the CPHY AGND source for the specified bus. The source can be an analog/digital channel, a math channel, or a reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the CPHY AGND signal. |
enum - Returns the currently selected CPHY AGND source for the specified bus.
BUS:B1:CPHY:AGND:SOUrce Ch1 BUS:B1:CPHY:AGND:SOUrce?
:BUS:B<x>:CPHY:AGND:THResholdset / query
Sets or queries the CPHY differential AGND source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 - +8 | CPHY differential AGND threshold for the specified bus. |
real (V) - Returns the CPHY differential AGND threshold for the specified bus.
BUS:B4:CPHY:AGND:THReshold 1.0 BUS:B4:CPHY:AGND:THReshold?
:BUS:B<x>:CPHY:A:LP:THRESHoldset / query
Sets or queries the CPHY Single Ended A LP threshold for the specified bus. The threshold argument is given in volts and must be within -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The CPHY Single Ended A LP threshold in volts for the specified bus. |
BUS:B4:CPHY:A:LP:THRESHold 1.0 BUS:B3:CPHY:A:LP:THRESHold?
:BUS:B<x>:CPHY:A:SOUrceset / query
Sets or queries the CPHY Single Ended A source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | Bus number B<x>. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the CPHY Single Ended A input. |
enum - Returns the current CPHY Single Ended A source for the specified bus line.
BUS:B1:CPHY:A:SOUrce Ch1 BUS:B1:CPHY:A:SOUrce? might return BUS:B1:CPHY:A:SOUrce CH1, indicating the source is set to channel 1.
:BUS:B<x>:CPHY:BC:SOUrceset / query
Sets or queries the CPHY BC source for the specified bus. The source can be an analog/digital channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform to use for the bus. |
enum - Returns the current CPHY BC source for the specified bus.
BUS:B1:CPHY:BC:SOUrce Ch1 BUS:B1:CPHY:BC:SOUrce? might return BUS:B1:CPHY:BC:SOUrce CH1, indicating the source is set to channel 1.
:BUS:B<x>:CPHY:BC:THResholdset / query
Sets or queries the CPHY differential BC source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 - +8 | CPHY differential BC threshold for the specified bus. |
real (V) - Returns the current CPHY differential BC threshold for the specified bus.
BUS:B4:CPHY:BC:THReshold 1.0 BUS:B4:CPHY:BC:THReshold?
:BUS:B<x>:CPHY:B:DATA:THRESHoldset / query
Sets or queries the CPHY Single Ended B threshold for the specified bus. The argument range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 - +8 | The CPHY Single Ended B threshold for the specified bus. |
real (V) - Returns the CPHY Single Ended B threshold setting for the specified bus.
BUS:B4:CPHY:B:DATA:THRESHold 1.0 BUS:B4:CPHY:B:DATA:THRESHold?
:BUS:B<x>:CPHY:B:SOUrceset / query
Sets the CPHY Single Ended B source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source used for the CPHY Single Ended B bus line. |
:BUS:B<x>:CPHY:BITRateset / query
Sets or queries the bit rate for the specified CPHY bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 4 Mbps - 10 Gps | Specifies the bit rate. The default bit rate is 1 Gbps and the allowed range is 4 Mbps to 10 Gps. |
real (bps) - Returns the bit rate setting for the specified bus.
BUS:B1:CPHY:BITRate 8000000 BUS:B1:CPHY:BITRate?
:BUS:B<x>:CPHY:CA:SOUrceset / query
Sets or queries the CPHY differential CA source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform to use for the CPHY differential CA source. |
BUS:B1:CPHY:CA:SOUrce Ch1 BUS:B1:CPHY:CA:SOUrce? might return BUS:B1:CPHY:CA:SOUrce CH1, indicating the source is set to channel 1.
:BUS:B<x>:CPHY:CA:THResholdset / query
Sets the CPHY differential CA source threshold for the specified bus. The bus number is specified by x.
:BUS:B<x>:CPHY:C:DATA:THRESHoldset / query
Sets or queries the CPHY Single Ended C source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 - +8 | The CPHY Single Ended C threshold for the specified bus. |
real (V) - The current CPHY Single Ended C threshold for the specified bus.
BUS:B4:CPHY:C:DATA:THRESHold 1.0 BUS:B4:CPHY:C:DATA:THRESHold?
:BUS:B<x>:CPHY:CGND:SOUrceset / query
Sets or queries the CPHY differential CGND source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the CGND source for the specified bus line. |
:BUS:B<x>:CPHY:CGND:THResholdset / query
Sets or queries the CPHY differential CGND source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
| threshold | real | -8 - +8 | The CPHY Single Ended C GND threshold for the specified bus. |
:BUS:B<x>:CPHY:C:LP:THRESHoldset / query
Sets the CPHY Single Ended C threshold for the specified bus. The argument range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 - +8 | The CPHY Single Ended C threshold for the specified bus. |
BUS:B4:CPHY:C:DATA:THRESHold 1.0 BUS:B4:CPHY:C:DATA:THRESHold? might return BUS:B4:CPHY:C:DATA:THRESHold 100.00000E-3
:BUS:B<x>:CPHY:C:SOUrceset / query
Sets or queries the CPHY Single Ended C source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects an analog channel, math channel, or analog reference waveform as the source. |
enum - Returns the CPHY Single Ended C source for the specified bus line.
BUS:B1:CPHY:C:SOUrce Ch1 sets the source to channel 1. BUS:B1:CPHY:C:SOUrce? might return BUS:B1:CPHY:C:SOUrce CH1, indicating the source is set to channel 1.
:BUS:B<x>:CPHY:LP:DIRectionset / query
Sets the direction of the CPHY bus in low power for the specified bus. The default direction is forward.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| direction | enum | forward | reverse | Specifies the direction in low power. |
BUS:B1:CPHY:LP:DIRection reverse BUS:B2:CPHY:LP:DIRection?
:BUS:B<x>:CPHY:SIGNALTYpeset / query
Sets or queries the signal type for CPHY bus decode. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | The number of the bus. |
| signal type | enum | SINGLE | DIFF | Specifies the signal type to single ended or differential. |
enum - Returns the CPHY signal type for the specified bus.
BUS:B1:CPHY:SIGNALTYpe DIFF BUS:B2:CPHY:SIGNALTYpe?
:BUS:B<x>:CPHY:SUBTYPeset / query
Sets or queries the sub type for CPHY bus decode. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CSI | DSI | Word | Symbol | Sub type for CPHY bus decode. |
:BUS:B<x>:CXPI:BITRateset / query
Sets or queries the bit rate for the specified CXPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | 1 bps - 20 kbps | Sets the CXPI Source bit rate for the specified bus. |
real (bps) - Returns the CXPI Source bit rate for the specified bus.
BUS:B1:CXPI:BITRate 100 sets the Bus 1 CXPI Source bit rate to 100 bps. BUS:B1:CXPI:BITRate? might return BUS:B1:CXPI:BITRate 100, indicating the Bus 1 CXPI Source bit rate is set to 100 bps.
:BUS:B<x>:CXPI:REC:THResholdset / query
Sets the CXPI source recessive threshold for the specified bus. The default value is 0 V and the valid range is -12 V to +12 V.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -12 - +12 | Recessive threshold voltage for the specified CXPI bus. |
BUS:B1:CXPI:REC:THReshold 1.0 BUS:B1:CXPI:REC:THReshold?
:BUS:B<x>:CXPI:SOUrceset / query
Sets or queries the source channel for the specified CXPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source channel for the specified CXPI bus. |
enum - Returns the source channel for the specified CXPI bus.
BUS:B1:CXPI:SOUrce Ch5 BUS:B1:CXPI:SOUrce? might return BUS:B1:CXPI:SOUrce Ch5, indicating the source is set to channel 5.
:BUS:B<x>:DISplay:FORMatset / query
Sets or queries how the data is represented in the bus form for the specified bus. Different bus types support only a subset of the available formats.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HEX | BINARY | MIXEDASCII | MIXEDHEX | ASCII | DECIMAL | MIXED | Bus display format. |
:BUS:B<x>:DISplay:LAYoutset / query
Sets or queries what to display for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | BUS | BUSANDWAVEFORM | Selects whether to display only the bus form or the bus form together with the constituent source waveform(s). |
enum - Returns the current bus display layout.
BUS:B1:DISplay:LAYout BUS specifies displaying the bus form only. BUS:B1:DISplay:LAYout? might return BUS:B1:DISPLAY:LAYOUT BUS, indicating the bus will be displayed without displaying its constituent source waveform(s).
:BUS:B<x>:DPHY:CLOCk:SOUrceset / query
Sets or queries the DPHY clock source for the specified bus line. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the source used for the DPHY clock. |
:BUS:B<x>:DPHY:CLOCk:THRESHoldset / query
Sets or queries the DPHY clock source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8V - +8V | The DPHY clock high threshold for the specified bus. |
real (V) - The DPHY clock threshold for the specified bus.
BUS:B4:DPHY:CLOCk:THRESHold 1.0 BUS:B3:DPHY:CLOCk:THRESHold?
:BUS:B<x>:DPHY:DMINus:DATATHRESHoldset / query
Sets or queries the DPHY D- source data threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8V - +8V | The DPHY D- source data threshold for the specified bus. |
:BUS:B<x>:DPHY:DMINus:LPTHRESHoldset / query
Sets or queries the DPHY D- source low power threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The DPHY D- source low power threshold for the specified bus. |
real (V) - Returns the DPHY D- source low power threshold for the specified bus.
BUS:B3:DPHY:DMINus:LPTHRESHold -2.5 sets the Bus 3 DPHY D- source low power threshold to -2.5 V. BUS:B2:DPHY:DMINus:LPTHRESHold? might return BUS:B2:DPHY:DMINus:LPTHRESHold -1.2, indicating the Bus 1 DPHY D- source low power threshold is set to -1.2 V.
:BUS:B<x>:DPHY:DMINus:SOUrceset / query
Sets or queries the DPHY D- source for the specified bus line. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects an analog channel, math channel, or reference waveform as the source. |
:BUS:B<x>:DPHY:DPlus:DATATHRESHoldset / query
Sets or queries the D+ source data threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8V - +8V | The DPHY D+ source data threshold for the specified bus. |
real (V) - Returns the DPHY D+ source data threshold for the specified bus.
BUS:B2:DPHY:DPlus:DATATHRESHold 100.00000E-3 BUS:B1:DPHY:DPlus:DATATHRESHold?
:BUS:B<x>:DPHY:DPlus:LPTHRESHoldset / query
Sets or queries the DPHY D+ source low power threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8V - +8V | The DPHY D+ source low power threshold for the specified bus. |
BUS:B3:DPHY:DPlus:LPTHRESHold 1.2 BUS:B2:DPHY:DPlus:LPTHRESHold?
:BUS:B<x>:DPHY:DPlus:SOUrceset / query
Sets or queries the DPHY D+ source for the specified bus line. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the DPHY D+ source as an analog channel, math channel, or reference waveform. |
enum - Returns the current DPHY D+ source for the specified bus line.
BUS:B1:DPHY:DPlus:SOUrce Ch2 BUS:B1:DPHY:DPlus:SOUrce?
:BUS:B<x>:DPHY:LP:DIRectionset / query
Sets or queries the DPHY bus direction in low power for the specified bus line. By default, the low-power direction is forward.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | forward | reverse | Specifies the DPHY bus direction in low power. |
BUS:B1:DPHY:LP:DIRection reverse BUS:B2:DPHY:LP:DIRection?
:BUS:B<x>:DPHY:PROTocol:TYPeset / query
Sets or queries the protocol type for DPHY bus decode. The default type is CSI, and the bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| type | enum | CSI | DSI | Protocol type to set. |
enum - Returns the current DPHY protocol type for the selected bus.
BUS:B1:DPHY:PROTocol:TYPe DSI BUS:B2:DPHY:PROTocol:TYPe?
:BUS:B<x>:DPHY:SIGNal:ENCodingset / query
Sets or queries the 8b9b encoding for DPHY bus decode. By default, 8b9b encoding is false.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | false | true | Enables or disables 8b9b encoding. |
enum - Returns the 8b9b encoding state.
BUS:B1:DPHY:SIGnal:ENCoding true sets the Bus 1 DPHY 8b9b encoding to true. BUS:B2:DPHY:SIGnal:ENCoding? might return BUS:B2:DPHY:SIGnal:ENCoding true, indicating the Bus 2 DPHY 8b9b encoding is set to true.
:BUS:B<x>:ESPI:ALERt:POLarityset / query
Sets or queries the ESPI alert polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| polarity | enum | HIGH | LOW | Sets the ESPI alert polarity to active high or active low. |
enum - Returns the ESPI alert polarity for the specified bus.
BUS:B1:ESPI:ALERt:POLarity LOW BUS:B1:ESPI:ALERt:POLarity?
:BUS:B<x>:ESPI:ALERt:SOUrceset / query
Sets or queries the alert source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies an analog channel, math channel, or reference waveform as the alert source. |
enum - Returns the current alert source for the specified bus.
BUS:B1:ESPI:ALERt:SOUrce Ch5 BUS:B1:ESPI:ALERt:SOUrce? might return BUS:B1:ESPI:ALERt:SOUrce CH5
:BUS:B<x>:ESPI:ALERTVIEWset / query
Sets or queries the ESPI alert view for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns the alert source on or off. |
enum - Returns the ESPI alert view state for the specified bus.
BUS:B1:ESPI:ALERTVIEW ON sets the Bus 1 alert view to on. BUS:B1:ESPI:ALERTVIEW? might return BUS:B1:ESPI:ALERTVIEW ON, indicating the Bus 1 alert view is on.
:BUS:B<x>:ESPI:ALERt:THResholdset / query
Sets or queries the alert source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | -8 - +8 | Alert threshold for the specified bus. |
real (V) - Returns the alert threshold for the specified bus.
BUS:B1:ESPI:ALERt:THReshold 1.0 BUS:B1:ESPI:ALERt:THReshold?
:BUS:B<x>:ESPI:CHIPSELect:POLarityset / query
Sets or queries the ESPI chip select polarity for the specified bus. HIGH sets the chip select polarity active high; LOW sets it active low.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | LOW | Chip select polarity setting. |
enum - Returns the current chip select polarity as HIGH or LOW.
BUS:B1:ESPI:CHIPSELect:POLarity LOW BUS:B1:ESPI:CHIPSELect:POLarity?
:BUS:B<x>:ESPI:CHIPSELect:SOUrceset / query
Sets or queries the chip select source for the specified ESPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects an analog channel, math channel, or reference waveform as the chip select source. |
enum - Returns the current chip select source setting for the specified bus.
BUS:B1:ESPI:CHIPSELect:SOUrce Ch5 sets the chip select source to channel 5. BUS:B1:ESPI:CHIPSELect:SOUrce? might return BUS:B1:ESPI:CHIPSELect:SOUrce Ch5, indicating the chip select source is set to channel 5.
:BUS:B<x>:ESPI:CHIPSELect:THResholdset / query
Sets or queries the ESPI chip select threshold for the specified bus. The valid range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 V - +8 V | Chip select threshold for the specified bus. |
real (V) - Returns the current chip select threshold for the specified bus.
BUS:B1:ESPI:CHIPSELect:THReshold 1.0 BUS:B1:ESPI:CHIPSELect:THReshold?
:BUS:B<x>:ESPI:CLOCk:POLarityset / query
Sets or queries the ESPI clock (SCLK) source polarity for the specified bus. Requires option SR-ESPI.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FALL | RISE | Sets the ESPI clock polarity to fall or rise. |
enum - Returns the ESPI clock polarity setting for the specified bus.
BUS:B1:ESPI:CLOCk:POLarity FALL BUS:B1:ESPI:CLOCk:POLarity?
:BUS:B<x>:ESPI:CLOCk:SOUrceset / query
Sets the ESPI clock source for the specified bus. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the clock source for the bus. |
enum - Returns the currently selected clock source for the bus.
BUS:B1:ESPI:CLOCk:SOUrce Ch5 BUS:B1:ESPI:CLOCk:SOUrce?
:BUS:B<x>:ESPI:CLOCk:THResholdset / query
Sets or queries the Clock source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 - +8 | Clock threshold for the specified bus. |
BUS:B1:ESPI:CLOCk:THReshold 1.0 BUS:B1:ESPI:CLOCk:THReshold?
:BUS:B<x>:ESPI:DATAONE:POLarityset / query
Sets or queries the ESPI data polarity for the specified bus. HIGH sets the data polarity to active high; LOW sets it to active low.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Sets the ESPI data polarity. |
enum - Returns the ESPI data polarity setting for the specified bus.
BUS:B1:ESPI:DATAONE:POLarity LOW BUS:B1:ESPI:DATAONE:POLarity?
:BUS:B<x>:ESPI:DATAONE:SOUrceset / query
Sets or queries the command (single mode) / IO[0] (dual mode) data source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the data source as an analog channel, math channel, or reference waveform. |
enum - Returns the current data source for the specified bus.
BUS:B1:ESPI:DATAONE:SOUrce Ch5 BUS:B1:ESPI:DATAONE:SOUrce? might return BUS:B1:ESPI:DATAONE:SOUrce Ch5, indicating the data source is set to channel 5.
:BUS:B<x>:ESPI:DATAONE:THResholdset / query
Sets or queries the ESPI Data One threshold for the specified bus. The valid range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | -8V - +8V | Sets the command/data threshold for the specified bus. |
real (V) - Returns the bus data threshold setting.
BUS:B1:ESPI:DATAONE:THReshold 1.0 BUS:B1:ESPI:DATAONE:THReshold?
:BUS:B<x>:ESPI:DATATWO:POLarityset / query
Sets or queries the ESPI response (single mode) / IO[1] (dual mode) polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Sets the ESPI data polarity to active high or active low. |
enum - Returns the current ESPI data polarity for the specified bus.
BUS:B1:ESPI:DATATWO:POLarity LOW BUS:B1:ESPI:DATATWO:POLarity?
:BUS:B<x>:ESPI:DATATWO:SOUrceset / query
Sets or queries the ESPI data source for the specified bus. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the data source as an analog channel, math channel, or reference waveform. |
BUS:B1:ESPI:DATATWO:SOUrce Ch5 BUS:B1:ESPI:DATATWO:SOUrce? might return BUS:B1:ESPI:DATATWO:SOUrce Ch5
:BUS:B<x>:ESPI:DATATWO:THResholdset / query
Sets or queries the response (single mode) / IO[1] (dual mode) data source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 - +8 | Command/data threshold for the specified bus. |
real (V) - Returns the current bus data source threshold.
BUS:B1:ESPI:DATATWO:THReshold 1.0 BUS:B1:ESPI:DATATWO:THReshold?
:BUS:B<x>:ESPI:IOMODeset / query
Sets or queries the I/O mode for the specified ESPI bus. Single mode displays the command and response decode in two lanes; dual mode displays the decode in a single data lane.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SINGle | DUAL | Selects the ESPI I/O display mode. |
enum - Returns the current ESPI I/O mode.
BUS:B1:ESPI:IOMODe DUAL sets the Bus 1 mode to dual. BUS:B1:ESPI:IOMODe? might return BUS:B1:ESPI:IOMODe DUAL, indicating the Bus 1 mode is set to dual.
:BUS:B<x>:ETHERCAT:DATAMINUSTHRESHoldset / query
Sets or queries the DATA Minus source threshold for the specified EtherCAT bus. The valid range is -8 V to +8 V, with a default value of 0 V.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 V - +8 V | EtherCAT DataMinus source threshold for the specified bus. |
real (V) - Returns the current EtherCAT DataMinus source threshold for the specified bus.
BUS:B1:ETHERCAT:DATAMINUSTHRESHold 1.0 BUS:B1:ETHERCAT:DATAMINUSTHRESHold?
:BUS:B<x>:ETHERCAT:DATAPLUSTHRESHoldset / query
Sets or queries the EtherCAT DataPlus source threshold for the specified bus. The valid range is -8 V to +8 V, and the default value is 0 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | 1 | The number of the bus. |
| threshold | real | -8 - +8 | EtherCAT DataPlus source threshold for the specified bus. |
string - Returns the command and current threshold value, e.g. BUS:B1:ETHERCAT:DATAPLUSTHRESHold 1.0, indicating the threshold is set to 1.0 V.
BUS:B1:ETHERCAT:DATAPLUSTHRESHold 1.0 BUS:B1:ETHERCAT:DATAPLUSTHRESHold?
:BUS:B<x>:ETHERCAT:SIGNALTYpeset / query
Sets or queries the EtherCAT signal type for the specified bus. Requires option SR-ETHERCAT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SINGLE | DIFF | Specifies the signal type. |
enum - Returns the current signal type for the specified EtherCAT bus.
BUS:B1:ETHERCAT:SIGNALTYpe SINGLE BUS:B1:ETHERCAT:SIGNALTYpe? might return BUS:B1:ETHERCAT:SIGNALTYpe SINGLE
:BUS:B<x>:ETHERCAT:SOUrce:DIFFset / query
Sets or queries the differential source for the specified EtherCAT bus. The source may be an analog channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Differential source to use for the bus. |
enum - Returns the currently specified differential source.
BUS:B1:ETHERCAT:SouRce:DIFF CH4 BUS:B1:ETHERCAT:SOUrce:DIFF? might return BUS:B1:ETHERCAT:SOUrce:DIFF CH4
:BUS:B<x>:ETHERCAT:SOUrce:DMINusset / query
Sets or queries the DataMinus (SDATAMINUS) source for the specified EtherCAT bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the DataMinus source from an analog channel, math waveform, or reference waveform. |
enum - Returns the currently specified DataMinus source.
BUS:B1:ETHERCAT:SOUrce:DMINus CH4 BUS:B1:ETHERCAT:SOUrce:DMINus?
:BUS:B<x>:ETHERCAT:SOUrce:DPLUsset / query
Sets or queries the EtherCAT DataPlus source for the specified bus. The source can be one analog channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | DataPlus source for the specified bus. |
enum - Returns the currently specified DataPlus source for the bus.
BUS:B1:ETHERCAT:SOUrce:DPLUs CH4 BUS:B1:ETHERCAT:SOUrce:DPLUs?
:BUS:B<x>:ETHERCAT:THRESHoldset / query
Sets or queries the differential source threshold for the specified EtherCAT bus. The valid range is -8 V to +8 V, and the default value is 0 V.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8 - +8 | EtherCAT differential source threshold for the specified bus. |
real (V) - Returns the EtherCAT differential source threshold for the specified bus.
BUS:B1:ETHERCAT:THRESHold 1.0 BUS:B1:ETHERCAT:THRESHold? might return BUS:B1:ETHERCAT:THRESHold 1.0, indicating the EtherCAT differential source threshold is set to 1.0 V.
:BUS:B<x>:ETHERnet:DATAMINUSTHRESHoldset / query
Sets or queries the Ethernet D- source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | V | The Ethernet D- source threshold for the specified bus. |
real (V) - The Ethernet D- source threshold for the specified bus.
BUS:B3:ETHERNET:DATAMINUSTHRESHOLD 250.0E-3 BUS:B2:ETHERNET:DATAMINUSTHRESHOLD?
:BUS:B<x>:ETHERnet:DATAPLUSTHRESHoldset / query
Sets or queries the Ethernet D+ source threshold for the specified bus. This threshold only applies when the Ethernet signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | - | The Ethernet D+ source threshold for the specified bus. |
:BUS:B<x>:ETHERnet:IPVFOURset / query
Sets or queries whether IPV4 packets are available for triggering on Ethernet for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
| state | enum | YES | NO | Specifies whether IPV4 packets are available for triggering. |
enum - Indicates whether IPV4 packets are available for triggering on Ethernet.
BUS:B1:ETHERNET:IPVFOUR NO BUS:B3:ETHERNET:IPVFOUR?
:BUS:B<x>:ETHERnet:LOWTHRESHoldset / query
Sets or queries the Ethernet source low threshold for the specified bus. This threshold only applies when the Ethernet signal type is differential.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
:BUS:B<x>:ETHERnet:QTAGGINGset / query
Sets or queries whether Q-Tagging packets are available for triggering on Ethernet for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | YES | NO | Specifies whether Q-Tagging packets are available. |
enum - Returns whether Q-Tagging packets are available for triggering on Ethernet.
BUS:B1:ETHERnet:QTAGGING YES BUS:B1:ETHERnet:QTAGGING?
:BUS:B<x>:ETHERnet:SIGNALTYpeset / query
Sets or queries the Ethernet signal type for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SINGLE | DIFF | Selects the Ethernet signal type. |
:BUS:B<x>:ETHERnet:SOUrceset / query
Sets or queries the Ethernet data (SDATA) source for the specified bus. The source channel is used when the signal type is differential.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the analog channel, math waveform, or reference waveform used as the Ethernet data source for differential input. |
enum - Returns the currently specified Ethernet data source.
BUS:B1:ETHERNET:SOURCE CH4 BUS:B1:ETHERNET:SOURCE?
:BUS:B<x>:ETHERnet:SOUrce:DMINusset / query
Sets or queries the Ethernet D- source for the specified bus. This source channel is used when the signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for Ethernet D- input. |
:BUS:B<x>:ETHERnet:SOUrce:DPLUsset / query
Sets or queries the Ethernet D+ source for the specified bus. The source channel is used when the signal type is single ended.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform or channel to use for the Ethernet D+ source. |
BUS:B1:ETHERNET:SOUrce:DPLUs Ch5 sets the D+ source to channel 5. BUS:B1:ETHERNET:SOUrce:DPLUs? might return BUS:B1:ETHERNET:SOURCE:DPLUS CH5, indicating the D+ source is set to channel 5.
:BUS:B<x>:ETHERnet:THRESHoldset / query
Sets or queries the Ethernet DATA source High threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Threshold value. |
real - Returns the Ethernet DATA source High threshold.
:BUS:B<x>:ETHERnet:TYPeset / query
Specifies the Ethernet standard speed for the selected bus. The bus number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TENBASET | HUNDREDBASETX | Selects the Ethernet speed as 10Base-T or 100Base-T. |
BUS:B1:ETHERNET:TYPE HUNDREDBASETX specifies the Ethernet speed as 100Base-T. BUS:B1:ETHERNET:TYPE? might return TENBASET, indicating that 10Base-T is the currently specified Ethernet speed.
:BUS:B<x>:EUSB:BITRateset / query
Sets the eUSB bit rate for the specified bus. The selected rate applies to bus B<x> eUSB decode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | FULL | LOW | Bit rate setting for the bus. |
BUS:B1:EUSB:BITRate HIGH sets the bit rate to 480 Mbps. BUS:B1:EUSB:BITRate? might return BUS:B1:EUSB:BITRate FULL, indicating the bit rate is set to 12 Mbps.
:BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHoldset / query
Sets or queries the eUSB D- Input Source Data Threshold for Data line decode for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The eUSB strobe threshold for the specified bus. |
real (V) - Returns the eUSB D- Input Source Data Threshold for the specified bus.
BUS:B1:EUSB:DATAMINUS:DATA:THRESHold 1.0 sets the bus 1 eUSB threshold to 1.0 V. BUS:B1:EUSB:DATAMINUS:DATA:THRESHold? might return BUS:B1:EUSB:DATAMINUS:DATA:THRESHold -8.0, indicating the bus 1 eUSB threshold is set to -8.0 V.
:BUS:B<x>:EUSB:DATAMINUSTHRESHoldset / query
Sets the eUSB DATA Minus source threshold for the specified bus. The allowed argument range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| NR3 | real | -8 V - +8 V | The eUSB DATA Minus source threshold. |
BUS:B1:EUSB:DATAMINUSTHRESHold 0.0 sets the bus 1 eUSB threshold to 0.0 V. BUS:B1:EUSB:DATAMINUSTHRESHold? might return BUS:B1:EUSB:DATAMINUSTHRESHold -8.0, indicating the bus 1 eUSB threshold is set to -8.0 V.
:BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHoldset / query
Sets or queries the eUSB D+ Input Source Data Threshold for Data line decode for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The eUSB Strobe threshold for the specified bus. |
real (V) - Returns the eUSB D+ Input Source Data Threshold for the specified bus.
BUS:B1:EUSB:DATAPLUS:DATA:THRESHold 1.0 sets the bus 1 eUSB threshold to 1.0 V. BUS:B1:EUSB:DATAPLUS:DATA:THRESHold? might return BUS:B1:EUSB:DATAPLUS:DATA:THRESHold -8.0, indicating the bus 1 eUSB threshold is set to -8.0 V.
:BUS:B<x>:EUSB:DATAPLUSTHRESHoldset / query
Sets the eUSB data-plus threshold for the specified bus. The example shows the bus 1 threshold being set in volts, and the query returns the current threshold value with units.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The eUSB threshold for the specified bus. |
BUS:B1:EUSB:DATAPLUSTHRESHold 0.0 BUS:B1:EUSB:DATAPLUSTHRESHold?
:BUS:B<x>:EUSB:LOWTHRESHoldset / query
Sets or queries the eUSB source Low threshold for the specified bus when signal type is Differential. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 - +8 | The eUSB Strobe threshold for the specified bus. |
BUS:B1:EUSB:LOWTHRESHold 1.0 BUS:B1:EUSB:LOWTHRESHold?
:BUS:B<x>:EUSB:OPERating:MODeset / query
Sets or queries the eUSB operating mode for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NATive | REPEATERHOSt | REPEATERPERIPHERAL | Selects the eUSB operating mode for the bus. |
enum - Returns the current eUSB operating mode for the specified bus.
BUS:B1:EUSB:OPERating:MODe NATive sets the operating mode as native.
:BUS:B<x>:EUSB:SIGNALTYpeset / query
Sets or queries the eUSB signal type for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | SINGLE | DIFF | Selects the eUSB signal type for the bus. |
enum - Returns the eUSB signal type for the specified bus.
BUS:B1:EUSB:SIGNALTYpe SINGLE BUS:B1:EUSB:SIGNALTYpe? might return BUS:B1:EUSB:SIGNALTYpe SINGLE NATive, indicating the eUSB signal type is single for bus 1.
:BUS:B<x>:EUSB:SOUrce:DIFFset / query
Sets or queries the eUSB Diff source for the specified bus when the signal type is Diff.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects an analog channel, math waveform, or reference waveform as the source. |
BUS:B1:EUSB:SOUrce:DIFF Ch1 sets the channel to 1.
:BUS:B<x>:EUSB:SOUrce:DMINusset / query
Sets or queries the eUSB DataMinus (SDATAMINUS) source for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the analog channel, math waveform, or reference waveform used as the source. |
enum - Returns the current eUSB DataMinus source selection for the specified bus.
BUS:B1:EUSB:SOUrce:DMINus Ch1 sets the channel to 1. BUS:B1:EUSB:SOUrce:DMINus? might return BUS:B1:EUSB:SOUrce:DMINus CH1, indicating channel 1 is the source.
:BUS:B<x>:EUSB:SOUrce:DPLUsset / query
Sets or queries the eUSB dataPlus source for the specified bus. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the bus. |
:BUS:B<x>:EUSB:THRESHoldset / query
Sets or queries the eUSB source High threshold for the specified bus when signal type is Diff.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | The eUSB Strobe threshold for the specified bus. |
BUS:B1:EUSB:THRESHold 1.0 BUS:B1:EUSB:THRESHold?
:BUS:B<x>:FLEXray:BITRateset / query
Sets or queries the FlexRay bus bit rate for the specified bus. If Custom is selected, use BUS:B<x>:FLEXray:BITRate:CUSTom to set the bit rate.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CUSTOM | RATE2M | RATE5M | RATE10M | Selects the FlexRay bus bit rate. |
enum - Returns the FlexRay bus bit rate setting for the specified bus.
:BUS:B<x>:FLEXray:BITRate:CUSTomset / query
Sets or queries the FlexRay custom bit rate for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| NR1 | numeric | - | The FlexRay custom bit rate for the specified bus. |
numeric - Returns the FlexRay custom bit rate setting for the specified bus.
BUS:B1:FLEXray:BITRate:CUSTom 10000000 BUS:B1:FLEXray:BITRate:CUSTom?
:BUS:B<x>:FLEXray:CHannelset / query
Sets or queries the FlexRay channel type for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | The bus number specified by x. |
| channel | enum | A | B | Selects the A or B channel. |
enum - Returns the current FlexRay channel type for the specified bus.
BUS:B1:FLEXRAY:CHANNEL B sets the FlexRay channel to B. BUS:B1:FLEXRAY:CHANNEL? might return BUS:B1:FLEXRAY:CHANNEL A, indicating the channel is set to A.
:BUS:B<x>:FLEXray:LOWTHRESHoldset / query
Sets or queries the FlexRay data source low threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | FlexRay data source low threshold for the specified bus. |
| bus | integer | - | Bus number x. |
real (V) - Returns the FlexRay data source low threshold for the specified bus.
BUS:B1:FLEXray:LOWTHRESHold 50.0e-3 BUS:B1:FLEXray:LOWTHRESHold?
:BUS:B<x>:FLEXray:SIGnalset / query
Sets or queries the FlexRay signal type for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| signal type | enum | BDIFFBP | BM | TXRX | FlexRay signal type for the specified bus. |
BUS:B1:FLEXRAY:SIGNAL BM BUS:B1:FLEXRAY:SIGNAL?
:BUS:B<x>:FLEXray:SOUrceset / query
Sets or queries the Flexray bus data source for the specified bus when the signal type is BDIFFBP or BM. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the specified bus. |
enum - Returns the current Flexray bus data source.
BUS:B1:FLEXRAY:SOUrce MATH4 BUS:B1:FLEXRAY:SOUrce?
:BUS:B<x>:FLEXray:SOUrce:TXRXset / query
Sets or queries the FlexRay TxRx data source for the specified bus when the signal type is TXRX. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the source waveform or channel for the TxRx data source. |
BUS:B1:FLEXRAY:SOUrce:TXRX CH1 BUS:B1:FLEXRAY:SOUrce:TXRX?
:BUS:B<x>:FLEXray:THRESHoldset / query
Sets or queries the FlexRay data source high threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | - | The FlexRay data source high threshold for the specified bus. |
BUS:B1:FLEXray:THRESHold 50.0-3 sets the high threshold to 50 mV. BUS:B1:FLEXray:THRESHold? might return BUS:B1:FLEXRAY:THRESHOLD 0.0E+0 indicating the high threshold is set to 0.0 V.
:BUS:B<x>:FLEXray:TXRXTHRESHoldset / query
Sets or queries the FlexRay data source TxRx threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | - | The TxRx threshold. |
BUS:B1:FLEXray:TXRXTHRESHold 50.0e-3
:BUS:B<x>:I2C:CLOCk:SOUrceset / query
Sets or queries the I2C clock (SCLK) source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | I2C SCLK source waveform for the specified bus. |
enum - Returns the current I2C SCLK source for the specified bus.
BUS:B1:I2C:CLOCK:SOURCE CH1 BUS:B1:I2C:CLOCK:SOURCE?
:BUS:B<x>:I2C:CLOCk:THResholdset / query
Sets or queries the I2C Clock (SCLK) source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | I2C Clock (SCLK) source threshold for the specified bus. |
:BUS:B<x>:I2C:DATa:SOUrceset / query
Sets or queries the I2C data (SDA) source for the specified I2C bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | I2C SDA source for the specified bus. |
enum - Returns the current I2C SDA source for the specified bus.
BUS:B1:I2C:DATA:SOURCE CH1 sets the I2C SDA source to channel 1. BUS:B1:I2C:DATA:SOURCE? might return BUS:B1:I2C:DATA:SOURCE MATH1 indicating that the I2C SDA source is set to math 1.
:BUS:B<x>:I2C:DATa:THResholdset / query
Sets or queries the I2C Data (SDA) source threshold for the specified bus. The bus is specified by x.
:BUS:B<x>:I2C:RWINADDRset / query
Sets or queries how seven-bit I2C addresses are represented in the bus display for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Selects the seven-bit address display format. |
enum - Returns the current seven-bit I2C address representation setting.
:BUS:B<x>:I3C:VERSionset / query
Sets or queries the I3C version for the specified bus. VR10 selects Version 1.0, and VR11 selects Version 1.1; Version 1.0 is the default.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | VR10 | VR11 | Selects the I3C version to use for the specified bus. |
enum - Returns the selected I3C version for the specified bus.
BUS:B1:I3C:VERSion VR11 sets the version to Version 1.1. BUS:B1:I3C:VERSion? might return BUS:B1:I3C:VERSion VR11 indicating that version 1.1 is selected for the decode.
:BUS:B<x>:LABel:COLorset / query
Sets or queries the color of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The bus label color. Send an empty string to return the color to the default color. |
string - Returns the bus label color.
BUS:B1:LABel:COLor "#FF0000" BUS:B1:LABel:COLor? might return BUS:B1:LABEL:COLOR "#FF0000" indicating the color is red.
:BUS:B<x>:LABel:FONT:BOLDset / query
Sets the bold font state for the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Controls whether the label is displayed in bold font. |
BUS:B1:LABel:FONT:BOLD OFF turns off bold font. BUS:B1:LABel:FONT:BOLD? might return BUS:B1:LABEL:FONT:BOLD 1 indicating a bold font.
:BUS:B<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Displays or does not display the label in italic font. |
enum - Returns the italic state of the specified bus label.
BUS:B1LABel:FONT:ITALic OFF turns off italic font. BUS:B1LABel:FONT:ITALic? might return BUS:B1:LABEL:FONT:ITALIC 1 indicating the font is italic.
:BUS:B<x>:LABel:FONT:SIZEset / query
Sets the font size of the specified bus label. The bus is identified by x, and the size is given in points.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| size | integer | points | Font size in points. |
BUS:B1:LABel:FONT:SIZE 10 BUS:B1:LABel:FONT:SIZE? might return BUS:B1:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
:BUS:B<x>:LABel:FONT:TYPEset / query
Sets or queries the font type of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Specified font type. |
string - Returns the current font type of the specified bus label.
BUS:B1:LABel:FONT:TYPE Monospace selects a monospace font. BUS:B1:LABel:FONT:TYPE? might return BUS:B1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman" indicating the font type is Frutiger LT Stdn.
:BUS:B<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Underline state for the bus label. |
:BUS:B<x>:LABel:NAMeset / query
Sets or queries the label for the specified bus. The bus is specified by x, and the label text is a quoted alphanumeric string limited to 30 characters.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| name | string | - | Quoted alphanumeric label text for the bus, limited to 30 characters. |
string - Returns the current bus label as a quoted string.
BUS:B1:LABEL:NAME "TEST" BUS:B1:LABEL:NAME? might return BUS:B1:LABEL:NAME "BUS 1" indicating that the waveform label for the bus B1 is set to "Bus 1".
:BUS:B<x>:LABel:XPOSset / query
Sets or queries the x-position of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x-position | real | pixels | The x-position of the specified bus label, relative to the left edge of the screen. |
real (pixels) - Returns the x-position of the specified bus label in pixels relative to the left edge of the screen.
BUS:B1:LABel:XPOS 90 BUS:B1:LABel:XPOS? might return BUS:B1:LABEL:XPOS 45.0000
:BUS:B<x>:LABel:YPOSset / query
Sets or queries the y-position of the specified bus label. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| y-position | real | pixels | The y-position of the specified bus label, in pixels relative to the left edge of the screen. |
real (pixels) - Returns the y-position of the specified bus label in pixels.
BUS:B1:LABel:YPOS 1.0e1 set the y position to 10.0. BUS:B1:LABel:YPOS? might return BUS:B1:LABEL:YPOS 0.0E+0 indicating the y position is 0.0 pixels from the baseline of the waveform.
:BUS:B<x>:LIN:BITRateset / query
Sets or queries the LIN bus bit rate for bus x. If Custom is selected, use BUS:B<x>:LIN:BITRate:CUSTom to set the bit rate.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | The number of the bus. |
| mode | enum | RATE10K | RATE1K | RATE19K | RATE2K | RATE4K | RATE9K | CUSTom | Selects the LIN bus bit rate. |
enum - Returns the current LIN bus bit rate setting.
:BUS:B<x>:LIN:BITRate:CUSTomset / query
Sets or queries the LIN custom bit rate for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | The bus number. |
| rate | integer | - | The LIN custom bit rate for the specified bus. |
BUS:B1:LIN:BITRate:CUSTom 9000 sets the bit rate to 9,000. BUS:B1:LIN:BITRate:CUSTom? might return BUS:B1:LIN:BITRate:CUSTom 10000 indicating that the bit rate is set to 10,000.
:BUS:B<x>:LIN:IDFORmatset / query
Sets or queries the LIN bus identifier format for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | - | - | B<x> is the number of the bus. |
| format | enum | NOPARity | PARity | Selects whether the ID format includes parity or separates parity. |
enum - Returns the LIN bus identifier format for the specified bus.
:BUS:B<x>:LIN:POLarityset / query
Sets or queries the LIN source polarity for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| polarity | enum | INVerted | NORmal | Specifies inverted or normal polarity. |
:BUS:B<x>:LIN:SAMPLEpointset / query
Specifies the LIN sample point for the selected LIN bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | % | A percentage that represents the point at which to sample during each bit period. |
BUS:B1:LIN:SAMPLEPOINT 10 sets the sample point to 10% of the bit period.
:BUS:B<x>:LIN:SOUrceset / query
Sets or queries the LIN data source for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the waveform source for the LIN bus. |
enum - Returns the current LIN source setting for the specified bus.
BUS:B1:LIN:SOUrce MATH4 BUS:B1:LIN:SOUrce? might return BUS:B1:LIN:SOURCE CH1, indicating the source is set to channel 1.
:BUS:B<x>:LIN:SOUrce:THResholdset / query
Sets or queries the LIN source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | The LIN source threshold for the specified bus. |
:BUS:B<x>:LIN:STANDardset / query
Sets or queries the LIN bus standard for the specified bus number x. The available standards are Mixed, version 1.x, or version 2.x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | Bus number x. |
| standard | enum | MIXed | V1X | V2X | LIN bus standard to select. |
enum - Returns the current LIN bus standard for the specified bus.
BUS:B1:LIN:STANDard V1X BUS:B1:LIN:STANDard? might return BUS:B1:LIN:STANDARD V2X, indicating the standard is set to version 2.x for bus B1.
:BUS:B<x>:MANChester:BITORDerset / query
Sets or queries the Manchester bus bit order for the specified bus number x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LSB | MSB | Selects the Manchester bus bit order. |
:BUS:B<x>:MANChester:BITRateset / query
Sets or queries the Manchester bus bit rate for bus x. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | 1 | The number of the bus. |
| bit rate | real | 1 Gbps | Sets the bit rate. |
real (bps) - Returns the current Manchester bus bit rate.
BUS:B1:MANChester:BITRate 125000 sets the bit rate to 125 kb. BUS:B1:MANChester:BITRate? might return BUS:B1:MANChester:BITRATE 19000, indicating that the bit rate is set to 19 kb.
:BUS:B<x>:MANChester:DISplaymodeset / query
Sets or queries the Manchester bus Packet View display mode for the specified bus. BITS displays single-bit data, and PACKET displays field-based packet view.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | BITS | PACKET | Selects the Manchester Packet View display mode. |
enum - Returns the current Packet View display mode.
BUS:B1:MANChester:DISplaymode PACKET BUS:B1:MANChester:DISplaymode? might return BUS:B1:MANChester:DISplaymode BITS, indicating the PacketView is on and the data can be seen in the form of fields.
:BUS:B<x>:MIL1553B:RESPonsetime:MAXimumset / query
Sets or queries the maximum response time to a valid command issued for the specified MIL-STD-1553 bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| value | real | s | The maximum response time. |
real (s) - Returns the maximum response time in seconds.
BUS:B1:MIL1553B:RESPONSETIME:MAXIMUM 15.0E-6 BUS:B1:MIL1553B:RESPONSETIME:MAXIMUM? might return BUS:B1:MIL1553B:RESPONSETIME:MAXIMUM 12.000E-6, indicating a maximum response time of 12 microseconds.
:BUS:B<x>:PARallel:CLOCk:EDGEset / query
Sets or queries the clock edge for the parallel bus specified by x. The bus can decode on the falling edge, rising edge, or either edge of the clock signal.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus. |
| edge | enum | FALLING | RISING | EITHER | Clock edge used for parallel-bus decoding. |
enum - Returns the clock edge setting for the parallel bus.
BUS:B1:PARALLEL:CLOCK:EDGE FALLING BUS:B1:PARALLEL:CLOCK:EDGE?
:BUS:B<x>:PARallel:CLOCk:ISCLOCKEDset / query
Determines whether the bus operates in a clocked or asynchronous fashion. The bus is specified by x.
:BUS:B<x>:PARallel:CLOCKSOUrceset / query
Sets or queries the Parallel clock bit source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | NONE | Clock source for the specified parallel bus. |
enum - Returns the current Parallel clock source for the specified bus.
BUS:B1:PARALLEL:CLOCKSOUrce CH3 BUS:B1:PARALLEL:CLOCKSOUrce?
:BUS:B<x>:PARallel:CLOCKSOUrce:THResholdset / query
Sets or queries the clock source threshold for the parallel bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Clock source threshold for the parallel bus. |
:BUS:B<x>:PCIE:DATAMinus:THRESHold:HIGhset / query
Sets or queries the PCIe DATA Minus source threshold for the specified bus. Requires option SRPCIE321.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | –8.0 - 8.0 | The specified PCIe DATA Minus source threshold for the specified bus. |
real (V) - Returns the specified PCIe DATA Minus source threshold for the specified bus.
BUS:B1:PCIE:DATAMinus:THRESHold:HIGh 250.0E-3 BUS:B1:PCIE:DATAMinus:THRESHold:HIGh?
:BUS:B<x>:PCIE:DATAPlus:THRESHold:HIGhset / query
Sets the PCIe Dplus threshold level for the specified bus. The example shows the value being set in volts and queried afterward.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | 250.0E-3 | The PCIe Dplus threshold level for the specified bus. |
BUS:B1:PCIE:DATAPlus:THRESHold:HIGh 250.0E-3 BUS:B1:PCIE:DATAPlus:THRESHold:HIGh?
:BUS:B<x>:PCIE:MTHResholdset / query
Sets or queries the PCIe math source threshold for the specified bus. Requires option SRPCIE321.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | –8.0 - 8.0 | The specified PCIe math source threshold for the specified bus. |
real (V) - Returns the PCIe math source threshold for the specified bus.
BUS:B1:PCIE:MTHReshold 250.0E-3 BUS:B1:PCIE:MTHReshold?
:BUS:B<x>:PCIE:SIGNALTYpeset / query
Sets or queries the PCIe signal type for the specified bus. Requires option SRPCIE321.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | B<x> is the number of the bus. |
| signal type | enum | SINGLE | DIFF | Specifies the signal type for the PCIe bus as single or differential. |
BUS:B1:PCIE:SIGNALTYpe SINGLE sets the Signal Type for PCIE bus as single.
:BUS:B<x>:PCIE:SOUrce:DMINusset / query
Sets or queries the PCIe DataMinus (SDATAMINUS) source for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform for the bus PCIe DataMinus signal. |
enum - Returns the currently selected PCIe DataMinus source for the specified bus.
BUS:B1:PCIE:SOUrce:DMINus CH1 BUS:B1:PCIE:SOUrce:DMINus?
:BUS:B<x>:PCIE:SOUrce:DPLUsset / query
Sets or queries the PCIe dataPlus (SDATAPLUS) source for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source waveform for the PCIe dataPlus signal. |
BUS:B1:PCIE:SOUrce:DPLUs CH1 BUS:B1:PCIE:SOUrce:DPLUs?
:BUS:B<x>:PSIFIVe:BITPERiodset / query
Sets or queries the PSI5 bit period bus parameter. Requires option SR-PSI5.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | - | - | Bus number B<x>. |
| bit period | real | s | Specifies the bit period. |
real (s) - Returns the current bit period.
BUS:B1:PSIFIVe:BITPERiod 0.000060 BUS:B1:PSIFIVe:BITPERiod?
:BUS:B<x>:PSIFIVe:BITRateset / query
Sets or queries the PSI5 bitrate for the selected bus. Requires option SR-PSI5.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | Bus number B<x>. |
| rate | enum | RATE125K | RATE189K | RATE83K | Sets the bit rate to 125 kb, 189 kb, or 83 kb. |
BUS:B1:PSIFIVe:BITRate RATE125k sets the bit rate to 125 kb.
:BUS:B<x>:PSIFIVe:COMM:DIRectionset / query
Sets or queries the PSI5 bus communication direction. The default is Sensor to ECU.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
| mode | enum | SENSORECU | ECUSENSor | Specifies the communication direction. |
BUS:B1:PSIFIVe:COMM:DIRection SENSORECU BUS:B1:PSIFIVe:COMM:DIRection?
:BUS:B<x>:PSIFIVe:DATAAset / query
Sets or queries the PSI5 frame mandatory data region A. The dataA value is specified in bits, with a default of 10 bits and a range of 10 to 24 bits.
| Name | Type | Values | Description |
|---|---|---|---|
| dataA | integer | 10 - 24 | DataA value in bits. |
BUS:B1:PSIFIVe:DATAA 17 BUS:B1:PSIFIVe:DATAA?
:BUS:B<x>:PSIFIVe:DATABset / query
Sets or queries the PSI5 frame optional bits of data region B. The value specifies the dataB value in bits.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
| dataB | integer | 0 - 12 | Specifies the dataB value in bits. |
integer (bits) - Returns the current dataB value in bits.
BUS:B1:PSIFIVe:DATAB 7 BUS:B1:PSIFIVe:DATAB?
:BUS:B<x>:PSIFIVe:DATAFORMatset / query
Sets or queries the data format in the PSI5 Frame2 packet.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NIBBLe | BYTe | Selects the PSI5 Frame2 data format. |
enum - Returns the current data format.
BUS:B1:PSIFIVe:DATAFORMat NIBBLe BUS:B1:PSIFIVe:DATAFORMat?
:BUS:B<x>:PSIFIVe:ECUSOURceset / query
Sets or queries the PSI5 ECUSource for a bus. The source may be an analog channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the source waveform. |
enum - Returns the current ECUSource setting, identified as a channel, math waveform, or reference waveform.
BUS:B1:PSIFIVe:ECUSOURce CH5 BUS:B1:PSIFIVe:ECUSOURce? might return :BUS:B1:PSIFIVe:ECUSOURce CH5, indicating the source is set to channel 5.
:BUS:B<x>:PSIFIVe:FRAMECONTrolset / query
Sets or queries the PSI5 frame optional control bits. The frame control value is specified in bits and ranges from 0 to 4 bits, with a default of 0 bits.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | 0 | The number of the bus. |
| <NR1> | integer | 0 - 4 | Frame control value in bits. |
integer (bits) - Returns the frame control value in bits.
BUS:B1:PSIFIVe:FRAMECONTrol 2 sets the frame control as 2 bits. BUS:B1:PSIFIVe:FRAMECONTrol? might return :BUS:B1:PSIFIVe:FRAMECONTrol 3, indicating that the frame control is 3 bits.
:BUS:B<x>:PSIFIVe:MESSagingset / query
Sets or queries the PSI5 messaging bits for the specified bus. OFF selects the default value 0; ON selects the value 2.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Selects the messaging bits value. |
enum - Returns the current messaging setting as OFF or ON.
BUS:B1:PSIFIVe:MESSaging OFF BUS:B1:PSIFIVe:MESSaging?
:BUS:B<x>:PSIFIVe:SOUrceset / query
Sets or queries the serial source for the PSI5 bus. The source can be an analog channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the PSI5 bus. |
enum - Returns the current source selection as an analog channel, math waveform, or reference waveform.
BUS:B1:PSIFIVe:SOUrce CH5 sets the source to channel 5. BUS:B1:PSIFIVe:SOUrce? might return :BUS:B1:PSIFIVe:SOUrce CH5, indicating the source is set to channel 5.
:BUS:B<x>:PSIFIVe:STATusset / query
Sets or queries the optional status bits of PSI5.
:BUS:B<x>:PSIFIVe:SYNCMODeset / query
Sets or queries the PSI5 Sync Mode for the specified bus. The mode can be Pulse Width or Tooth Gap.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PULSEWIDTh | TOOTHGAP | PSI5 Sync Mode to select. |
enum - Returns the current PSI5 Sync Mode for the specified bus.
BUS:B1:PSIFIVe:SYNCMODe PULSEWIDTh sets the Sync Mode to Pulse Width. BUS:B1:PSIFIVe:SYNCMODe? might return :BUS:B1:PSIFIVe:SYNCMODe TOOTHGAP, indicating that the Sync Mode is Tooth Gap.
:BUS:B<x>:PSIFIVe:SYNCTHRESHoldset / query
Sets or queries the PSI5 threshold for the ECU To Sensor specified bus.
:BUS:B<x>:PSIFIVe:THRESHoldset / query
Sets or queries the PSI5 threshold for the Sensor To ECU specified bus. Requires option SR-PSI5.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| threshold | real | -8 V - +8 V | Specifies the PSI5 Strobe threshold for the specified bus. |
real (V) - Returns the PSI5 threshold for the specified bus.
BUS:B1:PSIFIVe:THRESHold 1.0 BUS:B1:PSIFIVe:THRESHold?
:BUS:B<x>:RS232C:BITORDerset / query
Sets or queries the RS-232C bit order for bus x. LSB is the default value.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LSB | MSB | Selects the RS-232C bit order. |
BUS:B1:RS232C:BITORDer LSB BUS:B1:RS232C:BITORDer?
:BUS:B<x>:RS232C:BITRateset / query
Sets or queries the RS-232C bit rate for bus<x>. If Custom is selected, the custom bit rate is set with BUS:B<x>:RS232C:BITRate:CUSTom.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CUSTOM | RATE300 | RATE1K | RATE2K | RATE9K | RATE19K | RATE38K | RATE115K | RATE921K | Selects the RS-232C bit rate for the bus. |
integer (bits-per-second) - Returns the current RS-232C bit rate for the bus in bits-per-second.
BUS:B1:RS232C:BITRATE RATE9K BUS:B1:RS232C:BITRATE?
:BUS:B<x>:RS232C:BITRate:CUSTomset / query
Sets or queries the RS-232C custom bit rate for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
| NR1 | real | - | The custom bit rate. |
BUS:B1:RS232C:BITRATE:CUSTOM 9500 BUS:B1:RS232C:BITRATE:CUSTOM?
:BUS:B<x>:RS232C:DATABitsset / query
Sets or queries the RS-232C data width for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | 7 | 8 | 9 | Number of bits in the RS-232C data frame. |
enum - Returns the RS-232C data width for the specified bus.
BUS:B1:RS232C:DATABITS 8 sets the data bits to 8 for the RS-232C bus B1.
:BUS:B<x>:RS232C:DELIMiterset / query
Sets or queries the RS-232C string delimiter on bus <x>. This command applies only when Packet view is On and requires the SR-COMP option.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number specified by x. |
| delimiter | enum | NULl | CR | LF | SPace | XFF | Selects the packet delimiting value. |
BUS:B1:RS232C:DELIMITER LF BUS:B1:RS232C:DELIMITER?
:BUS:B<x>:RS232C:DISplaymodeset / query
Sets or queries the RS-232C display mode for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FRame | PACKET | RS-232C display mode for the specified bus. |
:BUS:B<x>:RS232C:PARityset / query
Sets or queries the RS-232C parity for bus <x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONe | EVEN | ODD | Parity setting for the RS-232C bus. |
enum - Returns the current RS-232C parity setting for bus <x>.
BUS:B1:RS232C:PARITY ODD BUS:B1:RS232C:PARITY?
:BUS:B<x>:RS232C:POLarityset / query
Sets or queries the RS-232C source polarity for bus <x>, where the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
:BUS:B<x>:RS232C:SOUrceset / query
Sets or queries the RS-232C source for bus <x>. The bus number is specified by x.
enum - Returns the selected RS-232C source for bus <x>.
BUS:B1:RS232C:SOURCE CH1 BUS:B1:RS232C:SOURCE?
:BUS:B<x>:RS232C:SOUrce:THResholdset / query
Sets or queries the RS-232C source threshold for the specified bus.
:BUS:B<x>:S8B10B:BITRateset / query
Sets or queries the 8B10b bit rate for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus. |
numeric - The bit rate for the specified bus.
BUS:B1:S8B10B:BITRate 4000 sets the bit rate to 4 kb. BUS:B1:S8B10B:BITRate? might return BUS:B1:S8B10B:BITRATE 19000, which indicates that the bit rate is set to 19 kb.
:BUS:B<x>:S8B10B:SOUrceset / query
Sets or queries the 8B10b source for the specified bus. This command specifies the source channel.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | 1 | The number of the bus. |
:BUS:B<x>:S8B10B:THResholdset / query
Sets or queries the 8B10b threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | -8 - +8 | The 8B10b Strobe threshold for the specified bus in volts. |
real (V) - Returns the 8B10b threshold for the specified bus in volts.
BUS:B4:S8B10B:THReshold 1.0 BUS:B3:S8B10B:THReshold?
:BUS:B<x>:SDLC:BITRateset / query
Sets or queries the SDLC bit rate for the specified bus. The default bit rate is 10 kbs and the valid range is 300 to 1000000000.
| Name | Type | Values | Description |
|---|---|---|---|
| bit rate | real | 300 - 1000000000 | Bit rate for the SDLC bus. |
BUS:B1:SDLC:BITRate 80000 BUS:B1:SDLC:BITRate?
:BUS:B<x>:SDLC:DATA:SOUrceset / query
Sets or queries the source for the specified SDLC bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the bus. |
enum - Returns the current source for the specified bus.
BUS:B1:SDLC:DATA:SOUrce Ch5 sets the source to channel 5. BUS:B1:SDLC:DATA:SOUrce? might return :BUS:B1:SDLC:DATA:SOUrce CH5, indicating the source is set to channel 5.
:BUS:B<x>:SDLC:DATA:THResholdset / query
Sets or queries the SDLC data threshold for the specified bus. The valid range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | -8V - +8V | SDLC strobe threshold for the specified bus. |
real (V) - Returns the SDLC strobe threshold set for the specified bus.
BUS:B1:SDLC:DATA:THReshold 1.0 BUS:B1:SDLC:DATA:THReshold?
:BUS:B<x>:SDLC:ENCodingset / query
Sets or queries the SDLC bus encoding for the specified bus. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DISCrete | INVert | Selects the SDLC encoding mechanism. |
enum - Returns the current SDLC bus encoding.
BUS:B1:SDLC:ENCoding DISCrete BUS:B1:SDLC:ENCoding? might return :BUS:B1:SDLC:ENCoding DISCrete, indicating that the encoding type is Discrete Transmission.
:BUS:B<x>:SDLC:MODuloset / query
Sets or queries the SDLC modulo for the specified bus waveform. The modulo determines the C-Field size in the SDLC frame.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus waveform number. |
| modulo | enum | 8 | 128 | C-Field size selection. |
BUS:B1:SDLC:MODulo 128 BUS:B1:SDLC:MODulo?
:BUS:B<x>:SENT:CHANWidthset / query
Sets or queries SENT fast channel bit widths for the specified bus.
enum - Returns the current SENT fast channel width setting for the specified bus.
BUS:B1:SENT:CHANWIDTH TWELVETWELVE sets the channel width of both Fast Channel 1 and Fast Channel 2 to twelve bits. BUS:B1:SENT:CHANWIDTH? might return BUS:B1:SENT:CHANWIDTH SIXTEENEIGHT, which indicates that the Fast Channel 1 width is 16 and the Fast Channel 2 width is eight.
:BUS:B<x>:SENT:NIBBLECountset / query
Sets or queries SENT data nibbles for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
returns
:BUS:B<x>:SENT:NUMCHANnelset / query
Sets or queries the SENT fast data channel count for the specified bus. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| channel count | enum | ONE | TWO | Specifies a SENT bus with one or two fast channels. |
enum - Returns the current SENT fast data channel count.
BUS:B1:SENT:NUMCHANnel TWO sets the number of SENT channels to two. BUS:B1:SENT:NUMCHANNEL? might return BUS:B1:SENT:NUMCHANNEL ONE to indicate that the number of channels is set to one.
:BUS:B<x>:SENT:PAUSEPULSeset / query
Sets or queries the SENT pause pulse for the specified bus. Requires option SRAUTOSEN.
:BUS:B<x>:SENT:POLARITYset / query
Sets or queries the SENT Idle State signal polarity for the specified bus. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | INVerted | NORmal | Specifies the SENT idle state signal polarity. |
enum - Returns the current SENT idle state signal polarity.
BUS:B1:SENT:POLARITY INVERTED BUS:B1:SENT:POLARITY?
:BUS:B<x>:SENT:SLOWset / query
Sets or queries the SENT slow channel configuration for the specified bus. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
:BUS:B<x>:SENT:SOUrceset / query
Sets or queries the SENT DATA source for the specified bus. Requires the SRAUTOSEN option.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Specifies the waveform used as the SENT DATA source. |
BUS:B1:SENT:SOURCE CH1 sets channel 1 as the source for the SENT bus. BUS:B1:SENT:SOURCE? might return BUS:B1:SENT:SOURCE CH1 indicating that the source is set to channel 1.
:BUS:B<x>:SENT:THRESHoldset / query
Sets or queries the SENT bus data source threshold value for the specified bus waveform. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | V | Sets the data source threshold value in volts. |
real (V) - Returns the SENT bus data source threshold value in volts.
BUS:B1:SENT:THRESHOLD 500.0E-3 sets the Bus 1 source threshold to 500.0 mV. BUS:B1:SENT:THRESHOLD? might return BUS:B1:SENT:THRESHOLD 2.5000 to indicate the Bus 1 source threshold is 2.5 V.
Queries the SENT bus source threshold value for the specified bus waveform. The value is reported in volts.
real (V) - The SENT bus source threshold value for the specified bus waveform.
BUS:B1:SENT:THRESHOLD 500.0E-3 BUS:B1:SENT:THRESHOLD?
:BUS:B<x>:SENT:TICKTIMEset / query
Sets or queries the SENT bus Clock Tick parameter for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| tick time | real | s | The SENT clock tick time. |
real (s) - Returns the SENT bus clock tick time for the specified bus.
BUS:B1:SENT:TICKTIME 3.0E-6 sets the SENT bus to clock tick to 3 microseconds. BUS:B1:SENT:TICKTIME? might return BUS:B1:SENT:TICKTIME 10.0000E-6 to indicate the clock tick is set to 10 microseconds.
Sets or queries the SENT bus Clock Tick parameter for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| tick time | real | s | The SENT clock tick time. |
real (s) - Returns the SENT bus clock tick time for the specified bus.
BUS:B1:SENT:TICKTIME 3.0E-6 BUS:B1:SENT:TICKTIME? might return BUS:B1:SENT:TICKTIME 10.0000E-6
:BUS:B<x>:SENT:TICKTOLeranceset / query
Sets or queries the SENT bus Tick Tolerance percent parameter for the specified bus. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
Sets or queries the SENT bus Tick Tolerance percent parameter for the specified bus. Requires option SRAUTOSEN.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
:BUS:B<x>:SMBUS:CLOCk:SOUrceset / query
Sets or queries the clock source for the specified bus. Requires option SR-SMBUS.
enum - Returns the current bus clock source.
BUS:B1:SMBUS:CLOCk:SOUrce CH5 BUS:B1:SMBUS:CLOCk:SOUrce?
Sets or queries the clock source for the specified SMBUS bus. Requires option SR-SMBUS.
enum - Returns the current SMBUS clock source for the specified bus.
BUS:B1:SMBUS:CLOCk:SOUrce CH5 BUS:B1:SMBUS:CLOCk:SOUrce?
:BUS:B<x>:SMBUS:CLOCk:THResholdset / query
Sets or queries the SMBUS clock threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
| threshold | real | -8V - +8V | SMBUS clock threshold for the specified bus. |
real (V) - Returns the SMBUS clock threshold for the specified bus.
BUS:B1:SMBUS:CLOCk:THReshold 1.0 BUS:B1:SMBUS:CLOCk:THReshold?
Queries the SMBUS clock threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus number. |
real (V) - Returns the SMBUS clock threshold for the specified bus.
BUS:B1:SMBUS:CLOCk:THReshold? might return BUS:B1:SMBUS:CLOCk:THReshold 1.0, indicating the Bus 1 SMBUS clock threshold is 1.0 V.
:BUS:B<x>:SMBUS:DATA:SOUrceset / query
Sets or queries the data source for the specified SMBUS bus. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the data source as an analog channel, math channel, or reference waveform. |
enum - Returns the current data source for the specified bus.
BUS:B1:SMBUS:DATA:SOUrce CH5 BUS:B1:SMBUS:DATA:SOUrce?
Sets or queries the data source for the specified SMBUS bus. The source can be an analog channel, math channel, or reference waveform.
enum - Returns the selected data source for the specified bus.
BUS:B1:SMBUS:DATA:SOUrce? might return BUS:B1:SMBUS:DATA:SOUrce CH5, indicating the Bus 1 data source is channel 5.
:BUS:B<x>:SMBUS:DATA:THResholdset / query
Sets or queries the SMBUS data threshold for the specified bus. The valid range is -8 V to +8 V.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
| threshold | real | -8V - +8V | SMBUS data threshold for the specified bus. |
real (V) - Returns the SMBUS data threshold for the specified bus.
BUS:B1:SMBUS:DATA:THReshold 1.0 BUS:B1:SMBUS:DATA:THReshold? might return BUS:B1:SMBUS:DATA:THReshold 1.0
Queries the SMBUS data threshold for the specified bus. The valid range is -8 V to +8 V.
string - Returns the SMBUS data threshold for the specified bus.
BUS:B1:SMBUS:DATA:THReshold? might return BUS:B1:SMBUS:DATA:THReshold 1.0, indicating the Bus 1 SMBUS data threshold is 1.0 V.
:BUS:B<x>:SMBUS:PEC:VALUeset / query
Sets or queries the SMBus PEC selection for the specified bus. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
| state | enum | TRUe | FALSe | SMBus PEC selection. |
enum - Returns the SMBus PEC selection for the specified bus.
BUS:B1:SMBUS:PEC:VALUe TRUe BUS:B1:SMBUS:PEC:VALUe?
Sets or queries the SMBus PEC selection for the specified bus. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The bus number. |
| state | enum | TRUe | FALSe | Selects SMBus PEC as true or false. |
enum - Returns the SMBus PEC selection for the specified bus.
BUS:B1:SMBUS:PEC:VALUe TRUe BUS:B1:SMBUS:PEC:VALUe? might return BUS:B1:SMBUS:PEC:VALUe TRUe, indicating the PEC checkbox selection is true.
:BUS:B<x>:SPACEWIRe:BITRateset / query
Sets or queries the SpaceWire bit rate for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
Sets or queries the SpaceWire bit rate for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Bus number. |
| <NR3> | real | - | SpaceWire bit rate for the specified bus. |
:BUS:B<x>:SPACEWIRe:DATa:SOUrceset / query
Sets or queries the source of the SpaceWire Data signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source of the SpaceWire Data signal. |
enum - Returns the current SpaceWire Data source for the specified bus.
BUS:B1:SPACEWIRe:DATa:SOUrce Ch5 BUS:B3:SPACEWIRe:DATa:SOUrce? might return BUS:B3:SPACEWIRe:DATa:SOUrce MATH2
Sets or queries the source of the SpaceWire Data signal for the specified bus. Requires option SR-SPACEWIRE.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the SpaceWire Data signal. |
enum - Returns the current SpaceWire Data source for the specified bus.
BUS:B1:SPACEWIRe:DATa:SOUrce Ch5 sets the Bus 1 DATa source to channel 5. BUS:B3:SPACEWIRe:DATa:SOUrce? might return BUS:B3:SPACEWIRe:DATa:SOUrce MATH2, indicating the DATa source for Bus 3 is set to Math waveform 2.
:BUS:B<x>:SPACEWIRe:DATa:THResholdset / query
Sets or queries the threshold of the SpaceWire Data signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
Sets or queries the threshold of the SpaceWire Data signal for the specified bus. Requires option SR-SPACEWIRE.
:BUS:B<x>:SPACEWIRe:DECode:TYPeset / query
Sets or queries the decode type for SpaceWire bus decode. Requires option SR-SPACEWIRE.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | STRObe | DATARate | Specifies the SpaceWire decode type. |
enum - Returns the current SpaceWire decode type.
BUS:B1:SPACEWIRe:DECode:TYPe STRobe BUS:B1:SPACEWIRe:DECode:TYPe?
Sets or queries the decode type for SpaceWire bus decode. Requires option SR-SPACEWIRE.
enum - Returns the current SpaceWire decode type for the specified bus.
BUS:B1:SPACEWIRe:DECode:TYPe STRobe BUS:B1:SPACEWIRe:DECode:TYPe?
:BUS:B<x>:SPACEWIRe:STRobe:SOUrceset / query
Sets or queries the source of the SpaceWire Strobe signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
Sets or queries the source of the SpaceWire Strobe signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
:BUS:B<x>:SPACEWIRe:STRobe:THResholdset / query
Sets or queries the threshold level of the SpaceWire Strobe signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | SpaceWire Strobe signal threshold level for the specified bus. |
BUS:B4:SPACEWIRe:STRobe:THReshold 1.2 BUS:B1:SPACEWIRe:STRobe:THReshold?
Sets or queries the threshold level of the SpaceWire Strobe signal for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus number. |
| threshold | real | V | SpaceWire Strobe signal threshold level for the specified bus. |
real (V) - Returns the SpaceWire Strobe signal threshold level for the specified bus.
BUS:B4:SPACEWIRe:STRobe:THReshold 1.2 BUS:B1:SPACEWIRe:STRobe:THReshold?
:BUS:B<x>:SPACEWIRe:SYNCset / query
Sets or queries sync for SpaceWire decoding.
Sets or queries sync for SpaceWire decoding.
:BUS:B<x>:SPACEWIRe:SYNC:COUntset / query
Sets or queries the length of the SpaceWire sync data string in bytes. Requires the SR-SPACEWIRE option.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 2 - 10 | Length of the data string in bytes used for SpaceWire sync bytes. |
integer (bytes) - Returns the current count value in bytes.
BUS:B1:SPACEWIRe:SYNC:COUnt 3 BUS:B1:SPACEWIRe:SYNC:COUnt?
Sets or queries the length of the data string in bytes used for SpaceWire sync bytes.
integer (bytes) - Returns the current length of the data string in bytes used for SpaceWire sync bytes.
BUS:B1:SPACEWIRe:SYNC:COUnt 3 BUS:B1:SPACEWIRe:SYNC:COUnt? might return BUS:B1:SPACEWIRe:SYNC:COUnt 3, indicating the count is 3.
:BUS:B<x>:SPACEWIRe:SYNC:PATTernset / query
Sets or queries the SpaceWire sync pattern used for decoding.
Returns or sets the SpaceWire sync pattern for the specified bus.
returns - Returns the current SpaceWire sync pattern for the specified bus.
BUS:B1:SPACEWIRe:SYNC:PATTern N N BUS:B1:SPACEWIRe:SYNC:PATTern?
:BUS:B<x>:SPACEWIRe:SYNC:VALUeset / query
Sets or queries the SpaceWire sync value for sync option data. Requires option SR-SPACEWIRE.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Sync value for sync option data. |
string - Returns the current SpaceWire sync value.
BUS:B1:SPACEWIRe:SYNC:VALUe D-00 D-00 BUS:B1:SPACEWIRe:SYNC:VALUe? might return BUS:B1:SPACEWIRe:SYNC:VALUe D-00 D-00, indicating the Bus 1 SpaceWire sync value is D-00 D-00.
Sets or queries the SpaceWire sync value for sync option data. Requires option SR-SPACEWIRE.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Sync value for sync option data. |
string - Returns the current SpaceWire sync value.
BUS:B1:SPACEWIRe:SYNC:VALUe D-00 D-00 BUS:B1:SPACEWIRe:SYNC:VALUe?
:BUS:B<x>:SPI:BITOrderset / query
Sets or queries the SPI bit order for the specified bus. The bus is specified by x.
Sets or queries the SPI bit order for the specified bus. The bus is specified by x.
:BUS:B<x>:SPI:CLOCk:POLarityset / query
Sets or queries the SPI clock (SCLK) source polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| polarity | enum | FALL | RISE | Sets the clock to the falling or rising edge of the signal. |
BUS:B1:SPI:CLOCK:POLARITY FALL BUS:B1:SPI:CLOCK:POLARITY?
Sets or queries the SPI clock (SCLK) source polarity for the specified bus. The bus is specified by x.
enum - Returns the SPI clock polarity setting for the specified bus.
BUS:B1:SPI:CLOCK:POLARITY FALL BUS:B1:SPI:CLOCK:POLARITY?
:BUS:B<x>:SPI:CLOCk:SOUrceset / query
Sets or queries the SPI clock (SCLK) source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
Sets or queries the SPI clock (SCLK) source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| b<x> | - | - | The number of the bus waveform. |
:BUS:B<x>:SPI:CLOCk:THResholdset / query
Sets or queries the SPI Clock (SCLK) source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | SPI Clock (SCLK) source threshold for the specified bus. |
BUS:B1:SPI:CLOCk:THReshold 50.0e-3 sets the threshold to 50.0 mV.
Sets or queries the SPI Clock (SCLK) source threshold for the specified bus. The bus is specified by x.
BUS:B1:SPI:CLOCk:THReshold 50.0e-3 sets the threshold to 50.0 mV.
:BUS:B<x>:SPI:DATa:POLarityset / query
Sets or queries the SPI data source polarity for the specified bus number. HIGH sets the polarity to active high and LOW sets it to active low.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | LOW | Sets the SPI data polarity state. |
BUS:B4:SPI:DATA:POLARITY HIGH BUS:B1:SPI:DATA:POLARITY?
Sets or queries the SPI Data source polarity for the specified bus number. HIGH sets active high and LOW sets active low.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | SPI data polarity setting. |
enum - Returns the current SPI Data polarity setting.
BUS:B4:SPI:DATA:POLARITY HIGH BUS:B1:SPI:DATA:POLARITY?
:BUS:B<x>:SPI:DATa:SIZeset / query
Sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 2 - 32 | Data size for the specified bus. |
BUS:B1:SPI:DATA:SIZE 7 BUS:B1:SPI:DATA:SIZE?
Sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| data size | integer | 2 - 32 | The data size for the specified bus. |
integer - Returns the data size for the specified bus.
BUS:B1:SPI:DATA:SIZE 7 sets the data size for SPI Bus 1 to seven bits per word. BUS:B1:SPI:DATA:SIZE? might return BUS:B1:SPI:DATA:SIZE 8, indicating that the data size for SPI Bus 1 is set to eight bits per word.
:BUS:B<x>:SPI:DATa:SOUrceset / query
Sets or queries the SPI Data source for the specified bus number. The source may be an analog channel, digital channel, math waveform, reference waveform, or digital reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | SPI data source for the specified bus. |
enum - Returns the current SPI Data source setting for the specified bus.
BUS:B1:SPI:DATA:SOURCE CH2 BUS:B3:SPI:DATA:SOURCE?
Queries the SPI Data source for the specified bus number. The source can be an analog channel, digital channel, math waveform, reference waveform, or digital reference waveform.
enum - Returns the current SPI Data source setting for the specified bus.
BUS:B3:SPI:DATA:SOURCE? might return BUS:B3:SPI:DATA:SOURCE CH3, indicating that the SPI data source for the Bus 3 is set to channel 3.
:BUS:B<x>:SPI:DATa:THResholdset / query
Sets or queries the SPI Data (SDA) source threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | SPI Data (SDA) source threshold for the specified bus. |
BUS:B1:SPI:DATa:THReshold 50.0e-3
Sets or queries the SPI Data (Data) source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V | The SPI Data (SDA) source threshold for the specified bus. |
BUS:B1:SPI:DATa:THReshold 50.0e-3
:BUS:B<x>:SPI:FRAMINGset / query
Sets or queries the SPI framing setting for the specified bus waveform. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | integer | - | The number of the bus waveform. |
| framing | enum | IDLE | SS | Selects the SPI framing mode. |
BUS:B1:SPI:FRAMING IDLE BUS:B1:SPI:FRAMING?
Sets or queries the SPI framing setting for the specified bus. The bus number is specified by x.
enum - Returns the current SPI framing setting for the specified bus.
:BUS:B<x>:SPI:IDLETimeset / query
Sets or queries the SPI idle time for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| idle time | real | - | Specifies the SPI idle time. |
real - Returns the SPI idle time setting.
BUS:B1:SPI:IDLETime 0.000004 BUS:B1:SPI:IDLETime? might return BUS:B1:SPI:IDLETIME 5.0000E-6, indicating that the idle time is set to 5 μs.
Sets or queries the SPI idle time for the specified bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| idle time | real | - | Specifies the SPI idle time. |
real - Returns the current SPI idle time for the specified bus.
BUS:B1:SPI:IDLETime 0.000004 BUS:B1:SPI:IDLETime?
:BUS:B<x>:SPI:MISo:DATa:POLarityset / query
Sets or queries the SPI MISo Data source polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Sets the polarity to high or low. |
BUS:B1:SPI:MISo:DATa:POLarity HIGH BUS:B1:SPI:MISo:DATa:POLarity? might return BUS:B1:SPI:MISo:DATa:POLarity HIGH, indicating that the SPI MISo data polarity is high.
Sets or queries the SPI MISO data source polarity for the specified bus waveform. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| polarity | enum | HIGH | LOW | Sets the polarity to high or low. |
enum - Returns the SPI MISO data source polarity for the specified bus waveform.
BUS:B1:SPI:MISo:DATa:POLarity HIGH BUS:B1:SPI:MISo:DATa:POLarity? might return BUS:B1:SPI:MISo:DATa:POLarity HIGH, indicating that the SPI MISo data polarity is high.
:BUS:B<x>:SPI:MISo:INPutset / query
Sets or queries the SPI MISo source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the waveform source for SPI MISo. |
BUS:B1:SPI:MISo:INPut Ch5 BUS:B1:SPI:MISo:INPut?
Sets or queries the SPI MISo source for the specified bus. The bus is specified by x.
enum - Returns the SPI MISo source for the specified bus.
:BUS:B<x>:SPI:MISo:THResholdset / query
Sets or queries the SPI MISo Data source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | The SPI MISo Data source threshold for the specified bus. |
real - Returns the SPI MISo Data source threshold for the specified bus.
BUS:B1:SPI:MISo:THReshold 1.0 BUS:B1:SPI:MISo:THReshold?
Sets or queries the SPI MISo Data source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | V | The SPI MISo Data source threshold for the specified bus. |
real (V) - Returns the SPI MISo threshold for the specified bus.
BUS:B1:SPI:MISo:THReshold 1.0 BUS:B1:SPI:MISo:THReshold?
:BUS:B<x>:SPI:MOSi:DATa:POLarityset / query
Sets or queries the SPI MOSI source polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | LOW | Selects the SPI MOSI data polarity. |
BUS:B1:SPI:MOSi:DATa:POLarity HIGH BUS:B1:SPI:MOSi:DATa:POLarity?
Sets or queries the SPI MOSI source polarity for the specified bus. The bus is specified by x.
enum - Returns the SPI MOSI data polarity for the specified bus.
BUS:B1:SPI:MOSi:DATa:POLarity HIGH BUS:B1:SPI:MOSi:DATa:POLarity?
:BUS:B<x>:SPI:MOSi:INPutset / query
Sets or queries the SPI MOSI source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the analog channel, math waveform, or reference waveform used as the SPI MOSI source. |
enum - Returns the currently selected SPI MOSI source for the specified bus.
BUS:B1:SPI:MOSi:INPut Ch5 sets the source to channel 5. BUS:B1:SPI:MOSi:INPut? might return :BUS:B1:SPI:MOSi:INPut HIGH, indicating the source is set to channel 5.
Queries the SPI MOSI source for the specified bus. The bus is specified by x.
enum - Returns the current SPI MOSI source setting for the specified bus.
BUS:B1:SPI:MOSi:INPut? might return :BUS:B1:SPI:MOSi:INPut HIGH, indicating the source is set to channel 5.
:BUS:B<x>:SPI:MOSi:THResholdset / query
Sets or queries the SPI MOSI source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | SPI MOSI Data source threshold for the specified bus. |
real (V) - Returns the SPI MOSI source threshold for the specified bus.
BUS:B1:SPI:MOSi:THReshold 1.0 sets the Bus 1 SPI MOSI threshold to 1.0 V. BUS:B1:SPI:MOSi:THReshold? might return :BUS:B1:SPI:MOSi:THReshold 225.00000E-3, indicates the Bus 1 SPI MOSI threshold is set to 225.0 mV.
Sets or queries the SPI MOSI source threshold for the specified bus. The bus is specified by x.
real (V) - Returns the SPI MOSI Data source threshold for the specified bus.
:BUS:B<x>:SPI:NUMBer:INputsset / query
Sets or queries the number of inputs for the specified SPI bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| inputs | enum | ONE | TWO | Number of data inputs to use. |
enum - Returns the current number of inputs for the specified bus.
BUS:B1:SPI:NUMBer:INputs TWO BUS:B1:SPI:NUMBer:INputs?
Sets or queries the number of SPI data inputs for the specified bus waveform. The bus is specified by x.
enum - Returns the current number of SPI data inputs for the specified bus.
:BUS:B<x>:SPI:SELect:POLarityset / query
Sets or queries the SPI Slave Select (SS) polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | LOW | HIGH | Sets the SPI Slave Select polarity. |
BUS:B1:SPI:SELECT:POLARITY HIGH sets the SPI Slave Select polarity for the bus B1 to active high.
Sets or queries the SPI Slave Select (SS) polarity for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | LOW | HIGH | Selects active low or active high polarity. |
BUS:B1:SPI:SELECT:POLARITY HIGH sets the SPI Slave Select polarity for the bus B1 to active high.
:BUS:B<x>:SPI:SELect:SOUrceset / query
Sets or queries the SPI Slave Select (SS) source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the waveform used as the SPI Slave Select source for the bus. |
enum - Returns the current SPI Slave Select source for the specified bus.
BUS:B1:SPI:SELECT:SOURCE MATH3 BUS:B1:SPI:SELECT:SOURCE?
Sets or queries the SPI Slave Select (SS) source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Specifies the SPI Slave Select source for the bus. |
enum - Returns the current SPI Slave Select source for the specified bus.
BUS:B1:SPI:SELECT:SOURCE MATH3 BUS:B1:SPI:SELECT:SOURCE? might return :BUS:B1:SPI:SELECT:SOURCE CH3, indicating that the SPI Slave Select source for the bus B1 is set to channel 3.
:BUS:B<x>:SPI:SELect:THResholdset / query
Sets or queries the SPI Select (SS) source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | SPI Select (SS) source threshold for the specified bus. |
Sets or queries the SPI Select (SS) source threshold for the specified bus. The bus is specified by x.
real - Returns the SPI Select (SS) source threshold for the specified bus.
:BUS:B<x>:SPMI:SCLk:SOUrceset / query
Sets or queries the SPMI Clock (SCLK) source for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Specifies the clock source waveform for the specified SPMI bus. |
enum - Returns the current SPMI Clock (SCLK) source for the specified bus.
BUS:B1:SPMI:SCLk:SOUrce CH1 BUS:B1:SPMI:SCLk:SOUrce? might return BUS:B3:SPMI:SCLk:SOUrce CH3, indicating that the data source for bus B3 is set to channel 3.
Sets or queries the SPMI Clock (SCLK) source for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the waveform used as the SPMI clock source for the specified bus. |
enum - Returns the current SPMI Clock (SCLK) source for the specified bus.
BUS:B1:SPMI:SCLk:SOUrce CH1 BUS:B1:SPMI:SCLk:SOUrce?
:BUS:B<x>:SPMI:SCLk:THResholdset / query
Sets or queries the SPMI clock source threshold for the specified bus waveform. B<x> identifies the bus waveform number, and <NR3> is the clock source threshold value.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The bus waveform number. |
| threshold value | real | - | The clock (SCLK) source threshold value for the specified SPMI bus. |
real - Returns the current SPMI clock source threshold for the specified bus.
BUS:B3:SPMI:SCLK:THRESHOLD 500.0E-3 BUS:B1:SPMI:SCLK:THRESHOLD?
Returns or sets the clock (SCLK) source threshold value for the specified SPMI bus. B<x> identifies the bus waveform.
real - The clock (SCLK) source threshold value for the specified SPMI bus.
BUS:B3:SPMI:SCLK:THRESHOLD 500.0E-3 BUS:B1:SPMI:SCLK:THRESHOLD?
:BUS:B<x>:SPMI:SDATa:SOUrceset / query
Sets or queries the SPMI Data (SDATA) source for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the waveform source used as the SPMI data source for the specified bus. |
enum - Returns the current SPMI data source selection for the specified bus.
BUS:B4:SPMI:SDATa:SOUrce CH1 sets channel 1 as the data source for the SPMI bus 4. BUS:B1:SPMI:SDATa:SOUrce? might return :BUS:B1:SPMI:SDATa:SOUrce CH5 indicating that the data source is set to channel 5 for bus 1.
Sets or queries the SPMI Data (SDATA) source for the specified bus.
string - Returns the SPMI Data (SDATA) source for the specified bus.
BUS:B1:SPMI:SDATa:SOUrce? might return :BUS:B1:SPMI:SDATa:SOUrce CH5 indicating that the data source is set to channel 5 for bus 1.
:BUS:B<x>:SPMI:SDATa:THResholdset / query
Sets or queries the SDATA source threshold value for the specified SPMI bus. Requires option SRPM.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | The data (SDATA) source threshold value for the specified SPMI bus. |
real - Returns the current SDATA source threshold value for the specified SPMI bus.
BUS:B2:SPMI:SDATa:THReshold 400.0E-3 BUS:B1:SPMI:SDATa:THReshold?
Returns the SDATA source threshold value for the specified SPMI bus. Requires option SRPM.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
real - Returns the data (SDATA) source threshold value for the specified SPMI bus.
BUS:B2:SPMI:SDATa:THReshold 400.0E-3 BUS:B1:SPMI:SDATa:THReshold?
:BUS:B<x>:SVID:ALERT:SOUrceset / query
Sets or queries the alert source channel for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Data source for the bus alert source. |
enum - Returns the current alert source channel for the specified SVID bus.
BUS:B1:SVID:ALERT:SOUrce CH5 BUS:B1:SVID:ALERT:SOUrce?
Sets or queries the alert source channel for the specified SVID bus. The bus is specified by x.
enum - Returns the alert source channel for the specified SVID bus.
BUS:B1:SVID:ALERT:SOUrce? might return :BUS:B1:SVID:ALERT:SOUrce CH5, indicating the source is set to channel 5.
:BUS:B<x>:SVID:ALERT:THResholdset / query
Sets or queries the alert threshold for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | -8 - +8 | The SVID Strobe threshold for the specified bus. |
real (V) - Returns the SVID threshold setting for the specified bus.
BUS:B1:SVID:ALERT:THReshold 0.6 BUS:B1:SVID:ALERT:THReshold?
Sets or queries the alert threshold for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | -8 - +8 | The SVID Strobe threshold for the specified bus. |
real (V) - Returns the SVID Strobe threshold for the specified bus.
BUS:B1:SVID:ALERT:THReshold 0.6 BUS:B1:SVID:ALERT:THReshold?
:BUS:B<x>:SVID:CLOCk:SOUrceset / query
Sets or queries the clock source channel for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the analog channel, math channel, or reference waveform used as the clock source. |
enum - Returns the selected clock source channel for the specified SVID bus.
BUS:B1:SVID:CLOCk:SOUrce CH3 BUS:B1:SVID:CLOCk:SOUrce?
Returns or sets the clock source channel for the specified SVID bus. The bus is specified by x.
enum - Returns the selected clock source channel for the specified SVID bus.
BUS:B1:SVID:CLOCk:SOUrce CH3 BUS:B1:SVID:CLOCk:SOUrce?
:BUS:B<x>:SVID:CLOCk:THResholdset / query
Sets or queries the clock threshold for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | -8 - +8 | The SVID Strobe threshold for the specified bus. |
real (V) - Returns the SVID clock threshold setting for the specified bus.
BUS:B1:SVID:CLOCk:THReshold 1.0 BUS:B1:SVID:CLOCk:THReshold?
Sets or queries the clock threshold for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | -8 V - +8 V | The SVID Strobe threshold for the specified bus. |
real (V) - Returns the current SVID clock threshold for the specified bus.
BUS:B1:SVID:CLOCk:THReshold 1.0 BUS:B1:SVID:CLOCk:THReshold?
:BUS:B<x>:SVID:DATA:SOUrceset / query
Sets or queries the data source channel for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects an analog channel, math channel, or reference waveform as the SVID data source. |
enum - Returns the current SVID data source for the specified bus.
BUS:B1:SVID:DATA:SOUrce CH4 BUS:B1:SVID:DATA:SOUrce? might return :BUS:B1:SVID:DATA:SOUrce CH4
Sets or queries the data source channel for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the data source channel for the SVID bus. |
enum - Returns the selected data source channel for the specified SVID bus.
BUS:B1:SVID:DATA:SOUrce CH4 BUS:B1:SVID:DATA:SOUrce? might return :BUS:B1:SVID:DATA:SOUrce CH4
:BUS:B<x>:SVID:DATA:THResholdset / query
Sets or queries the data threshold for the specified SVID bus waveform. The bus is identified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | -8 V - +8 V | The SVID Strobe threshold for the specified bus. |
real (V) - Returns the SVID data threshold for the specified bus.
BUS:B1:SVID:DATA:THReshold 0.25 BUS:B1:SVID:DATA:THReshold?
Sets or queries the data threshold for the specified SVID bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
real (V) - Returns the SVID data threshold for the specified bus.
BUS:B1:SVID:DATA:THReshold 0.25 BUS:B1:SVID:DATA:THReshold?
:BUS:B<x>:TYPeset / query
Sets or queries the bus type or standard for the specified bus waveform. Bus type arguments are available only when the required serial bus option is installed.
| Name | Type | Values | Description |
|---|---|---|---|
| bus type | enum | ARINC429 | AUDio | CAN | ETHernet | EUSB | FLEXRAY | I2C | I3C | LIN | MDIO | MIL1553B | PARallel | RS232C | SENT | SPI | SPMI | SVID | USB | Specifies the bus type or standard for bus x. |
:BUS:B<x>:USB:BITRateset / query
Sets or queries the USB data rate for bus <x>, where the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus number | integer | 1 | The bus waveform number <x>. |
| rate | enum | FULL | HIGH | LOW | USB3O | USB31G1 | USB32G1 | USB31G2 | USB32G2 | USB4G2 | USB4G3 | USB bit rate to set for the selected bus. |
enum - Returns the current USB data rate for bus <x>.
BUS:B1:USB:BITRATE FULL sets the bit rate to 12 Mbps.
Sets or queries the USB data rate for bus <x>. Requires option SR-USB.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | - | - | Bus waveform number <x>. |
enum - Returns the current USB bit rate setting.
BUS:B1:USB:BITRATE FULL sets the bit rate to 12 Mbps.
:BUS:B<x>:USB:DATAMINUSTHRESHoldset / query
Sets or queries the USB D- source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | The Minus threshold. |
real (V) - Returns the USB D- source threshold value.
BUS:B1:USB:DATAMINUSTHRESHold 50.0e-3 BUS:B1:USB:DATAMINUSTHRESHold?
Sets or queries the USB D- source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | Minus threshold. |
real (V) - Returns the current USB D- source threshold for the specified bus.
BUS:B1:USB:DATAMINUSTHRESHold 50.0e-3 BUS:B1:USB:DATAMINUSTHRESHold?
:BUS:B<x>:USB:DATAPLUSTHRESHoldset / query
Sets or queries the USB D+ source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| threshold | real | - | The Plus threshold. |
real (V) - Returns the current Plus threshold setting.
BUS:B1:USB:DATAPLUSTHRESHold 50.0e-3 sets the threshold to 50.0 mV. BUS:B1:USB:DATAPLUSTHRESHold? might return :BUS:B1:USB:DATAPLUSTHRESHOLD 0.0E+0 indicating the threshold is set to 0.0 V.
Sets or queries the USB D+ source threshold for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | The Plus threshold. |
real (V) - Returns the current USB D+ source threshold for the specified bus.
BUS:B1:USB:DATAPLUSTHRESHold 50.0e-3 BUS:B1:USB:DATAPLUSTHRESHold?
:BUS:B<x>:USB:DISplaymodeset / query
Sets or queries the USB bus packet view for the specified bus waveform. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| state | enum | ON | OFF | Turns the packet view for the decode on or off. |
enum - Returns the packet view state for the specified bus waveform.
BUS:B1:USB:DISplaymode OFF BUS:B1:USB:DISplaymode?
Sets or queries the USB bus packet view for the specified bus. The bus is identified by B<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns the packet view on or off. |
enum - Returns the packet view state for the specified USB bus.
BUS:B1:USB:DISplaymode OFF BUS:B1:USB:DISplaymode? might return BUS:B1:USB:DISplaymode OFF indicating that packet view is set to off.
:BUS:B<x>:USB:LANEONE:SOUrceset / query
Sets or queries the USB data (SDATA) of the Lane 1 source for the specified bus. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the data source for USB Lane 1. |
enum - Returns the current USB Lane 1 source setting for the specified bus.
BUS:B1:USB:LANEONE:SOUrce CH1 sets the USB Lane 1 source to channel 1. BUS:B1:USB:LANEONE:SOUrce? might return BUS:B1:USB:LANEONE:SOUrce CH1, indicating that the USB Lane 1 source is channel 1.
Sets or queries the USB data (SDATA) Lane 1 source for the specified bus. The bus is specified by B<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the data source for USB Lane 1. |
enum - Returns the current USB Lane 1 source setting.
BUS:B1:USB:LANEONE:SOUrce CH1 sets the USB Lane 1 source to channel 1. BUS:B1:USB:LANEONE:SOUrce? might return BUS:B1:USB:LANEONE:SOUrce CH1, indicating that the USB Lane 1 source is channel 1.
:BUS:B<x>:USB:LANEONE:THRESHoldset / query
Sets or queries the USB data (SDATA) lane 1 threshold for the specified bus. The valid range is -8.0 to 8.0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8.0 - 8.0 | USB Lane 1 threshold level for the specified bus. |
real - Returns the USB Lane 1 threshold level for the specified bus.
BUS:B1:USB:LANEONE:THRESHold 250.0E-3 BUS:B1:USB:LANEONE:THRESHold?
Sets or queries the USB data (SDATA) Lane 1 threshold for the specified bus. The valid range is -8.0 to 8.0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -8.0 - 8.0 | USB Lane 1 threshold level for the specified bus. |
real - Returns the USB Lane 1 threshold level for the specified bus.
BUS:B1:USB:LANEONE:THRESHold 250.0E-3 BUS:B1:USB:LANEONE:THRESHold?
:BUS:B<x>:USB:LANESset / query
Sets or queries the number of lanes for the specified USB bus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SINGLe | DUAL | Number of lanes to use for the specified bus. |
enum - Returns the current lane setting for the specified bus.
BUS:B1:USB:LANES DUAL BUS:B1:USB:LANES? might return BUS:B1:USB:LANES DUAL
:BUS:B<x>:USB:LANES?query
Sets or queries the number of lanes for the specified USB bus.
enum - Returns the current lane count setting for the specified bus.
BUS:B1:USB:LANES DUAL BUS:B1:USB:LANES?
:BUS:B<x>:USB:LANEZERO:SOUrceset / query
Sets or queries the USB Lane 0 source for the specified bus. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the data source for the USB bus lane 0. |
enum - Returns the current USB Lane 0 source setting for the specified bus.
BUS:B1:USB:LANEZERO:SOUrce CH1 BUS:B1:USB:LANEZERO:SOUrce?
Sets or queries the USB Lane 0 source for the specified bus. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Data source for the specified USB bus. |
enum - Returns the current USB Lane 0 source selection for the specified bus.
BUS:B1:USB:LANEZERO:SOUrce CH1 BUS:B1:USB:LANEZERO:SOUrce?
:BUS:B<x>:USB:LANEZERO:THRESHoldset / query
Sets or queries the USB data (SDATA) Lane 0 threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | -8.0 - 8.0 | USB Lane 0 threshold level for the specified bus. |
real - Returns the USB Lane 0 threshold level for the specified bus.
BUS:B1:USB:LANEZERO:THRESHold 250.0E-3 BUS:B1:USB:LANEZERO:THRESHold?
Sets or queries the USB data (SDATA) Lane 0 threshold for the specified bus. Requires option SR-USB3, SR-USB2, or SR-USB1.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| <NR3> | real | -8.0 - 8.0 | Specifies the USB Lane 0 threshold level for the specified bus. |
real - Returns the USB Lane 0 threshold level for the specified bus.
BUS:B1:USB:LANEZERO:THRESHold 250.0E-3 BUS:B1:USB:LANEZERO:THRESHold?
:BUS:B<x>:USB:LOWTHRESHoldset / query
Sets or queries the low threshold for the specified USB bus waveform. Requires option SR-USB2.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | - | The low threshold value. |
BUS:B1:USB:LOWTHRESHold 50.0e-3 BUS:B1:USB:LOWTHRESHold? might return BUS:B1:USB:LOWTHRESHOLD 0.0E+0
Returns the low threshold for the specified USB bus waveform. Requires option SR-USB2.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
real (V) - Returns the low threshold for the specified bus waveform.
BUS:B1:USB:LOWTHRESHold? might return BUS:B1:USB:LOWTHRESHOLD 0.0E+0 indicating that the threshold is set to 0.0 V.
:BUS:B<x>:USB:SEMATHTHRESHoldset / query
Sets or queries the single ended source threshold for the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | The number of the bus waveform. |
| threshold | real | -8.0 - 8.0 | Specifies the single ended source threshold for the specified bus. |
real - Returns the single ended source threshold for the specified bus.
BUS:B1:USB:SEMATHTHRESHold 250.0E-3 BUS:B1:USB:SEMATHTHRESHold?
:BUS:B<x>:USB:SIGNALTYpeset / query
Sets or queries the USB signal type for bus waveform B<x>. Use SINGLE for single-ended signals or DIFF for differential signals.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus waveform number. |
| signal type | enum | SINGLE | DIFF | Selects single-ended or differential USB signals. |
enum - Returns the current USB signal type for bus B<x>.
BUS:B1:USB:SIGNALTyPE SINGLE BUS:B1:USB:SIGNALTYPE? might return :BUS:B1:USB:SIGNALTYPE DIFF, indicating the signal type is differential.
Queries the USB signal type for bus B<x>. The signal type can be single-ended or differential.
enum - Returns the USB signal type for the specified bus.
BUS:B1:USB:SIGNALTYpe SINGLE BUS:B1:USB:SIGNALTYpe? might return :BUS:B1:USB:SIGNALTYPE DIFF
:BUS:B<x>:USB:SOUrceset / query
Sets or queries the USB data source for bus <x> when the signal type is differential. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the USB data source for the bus. |
enum - Returns the USB data source for bus <x>.
BUS:B1:USB:SOURCE D2 sets the USB data source for bus B1 to D2. BUS:B1:USB:SOURCE? might return :BUS:B1:USB:SOURCE D3, indicating that the USB data source for bus B1 is D3.
Sets or queries the USB data source when the signal type is differential for bus <x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | USB data source for the specified bus. |
enum - Returns the USB data source for bus <x>.
BUS:B1:USB:SOURCE? might return :BUS:B1:USB:SOURCE D3, indicating that the USB data source for bus B1 is D3.
:BUS:B<x>:USB:SOUrce:DMINusset / query
Sets or queries the USB D- (SDATAMINUS) source for bus <x> when the signal type is single ended. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the D- source for the specified USB bus. |
enum - Returns the current USB D- source for the specified bus.
BUS:B1:USB:SOURCE:DMINUS CH2 sets the USB Data Source for D- input to channel 2. BUS:B1:USB:SOURCE:DMINUS? might return :BUS:B1:USB:SOURCE:DMINUS CH4, indicating that channel 4 is set to be the D- input for USB data.
Sets or queries the USB D- (SDATAMINUS) source for bus <x> when the signal type is single ended. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Source waveform for the specified USB bus D- input. |
enum - Returns the current USB D- source setting for the specified bus.
BUS:B1:USB:SOURCE:DMINUS CH2 sets the USB Data Source for D- input to channel 2. BUS:B1:USB:SOURCE:DMINUS? might return :BUS:B1:USB:SOURCE:DMINUS CH4, indicating that channel 4 is set to be the D- input for USB data.
:BUS:B<x>:USB:SOUrce:DPLUsset / query
Sets or queries the USB dataPlus (SDATAPLUS) source for the specified bus when the signal type is single ended. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Selects the source waveform for USB D+ on bus <x>. |
Sets or queries the USB dataPlus (SDATAPLUS) source for the specified bus when the signal type is single ended. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Source used for the USB D+ signal for bus <x>. |
BUS:B1:USB:SOURCE:DPLUs CH2 BUS:B1:USB:SOURCE:DPLUs?
:BUS:B<x>:USB:THRESHoldset / query
Sets or queries the USB DATA source high threshold for the specified bus when the signal source is differential. The bus is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | USB DATA source high threshold for the specified bus. |
real - Returns the USB DATA source high threshold for the specified bus.
BUS:B1:USB:THRESHold 50.0e-3 BUS:B1:USB:THRESHold?
Sets or queries the USB DATA source high threshold for the specified bus when the signal source is differential. The bus is specified by B<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| threshold | real | V | USB DATA source high threshold for the specified bus. |
real (V) - Returns the USB DATA source high threshold for the specified bus.
BUS:B1:USB:THRESHold 50.0e-3 BUS:B1:USB:THRESHold?
:BUS:B<x>:USB:TYPeset / query
Sets or queries the bus type or standard for the specified bus.
:BUS:B<x>:USB:TYPe?query
Sets or queries the USB bus type or standard for the specified bus.
enum - Returns the USB bus type or standard for the specified bus.
:BUS:DELeteset / query
Deletes the specified bus.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the bus to delete and is of the form "B<NR1>", where <NR1> is ≥1. |
BUS:DELETE B1 deletes bus B1.
:BUS:LIST?query
Returns a comma-separated list of all currently defined buses.
string - Returns all currently defined buses.
BUS:LIST? might return BUS:LIST B1,B4 indicating the bus 1 and bus 4 are defined.
:BUS:B1:AUDIO:BITDELAYset / query
Sets the default bit delay for BUS B1 audio decoding. The factory default value is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| bitdelay | integer | - | Bit delay setting for BUS B1 audio decoding. |
:BUS:B1:AUDIO:BITORDERset / query
Sets the bit order for Bus B1 audio decoding. The factory default is MSB.
| Name | Type | Values | Description |
|---|---|---|---|
| bitorder | enum | MSB | Bit order used for audio decoding. |
:BUS:B1:AUDIO:CHANNEL:SIZEset / query
Sets the audio channel size for bus B1 audio decoding. The factory default is 24.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | Audio channel size. |
:BUS:B1:AUDIO:CLOCK:POLARITYset / query
Factory default for the audio clock polarity setting. The default value is RISE.
:BUS:B1:AUDIO:CLOCK:SOURCEset / query
Sets the source channel for the bus B1 audio clock signal. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Source channel for the bus B1 audio clock signal. |
:BUS:B1:AUDIO:DATA:POLARITYset / query
Sets the default polarity for bus 1 audio data.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | NORMAL | Data polarity setting. |
:BUS:B1:AUDIO:DATA:SIZEset / query
Sets the audio data size for bus B1. The factory default is 24.
:BUS:B1:AUDIO:DISPLAY:FORMATset / query
Sets the display format for bus B1 audio decoding. The factory default is SIGNEDDECIMAL.
:BUS:B1:AUDIO:FRAME:SIZEset / query
Sets the audio frame size for bus B1. The factory default is 8.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 0 - 4294967295 | Audio frame size. |
:BUS:B1:AUDIO:FRAMESYNC:POLARITYset / query
Sets the polarity of the frame sync signal for audio bus decoding. Factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | RISE | Polarity of the frame sync signal. |
:BUS:B1:AUDIO:FRAMESYNC:SOURCEset / query
Sets the source for the audio frame sync signal for bus B1. The factory default is CH2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH2 | Frame sync source. |
:BUS:B1:AUDIO:TYPEset / query
Sets the audio bus type for bus B1. The factory default is I2S.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | I2S | Audio bus type. |
:BUS:B1:AUDIO:WORDSEL:POLARITYset / query
Sets the audio word select polarity for bus B1. The factory default is NORMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | NORMAL | Audio word select polarity. |
:BUS:B1:AUDIO:WORDSEL:SOURCEset / query
Sets the source channel for the WORDSEL signal in Bus B1 audio decode settings.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH2 | Selects the source channel for WORDSEL. |
:BUS:B1:CAN:BITRATEset / query
Sets the CAN bus bitrate for bus B1. This factory-default value is 500000.
:BUS:B1:CAN:FD:BITRATEset / query
Sets the CAN FD bit rate for bus B1. The factory default is 4000000.
| Name | Type | Values | Description |
|---|---|---|---|
| bitrate | integer | 4000000 | CAN FD bit rate in bits per second. |
:BUS:B1:CAN:FD:STANDARDset / query
Sets the CAN FD standard for bus B1. The factory default is ISO.
:BUS:B1:CAN:PROBEset / query
Sets the CAN probe selection for bus B1. The factory default is CANH.
:BUS:B1:CAN:SAMPLEPOINTset / query
Sets the CAN sample point for bus B1. The factory default is 50.
| Name | Type | Values | Description |
|---|---|---|---|
| samplepoint | integer | 0 - 100 | Sample point percentage for CAN decoding. |
:BUS:B1:CAN:SOURCEset / query
Sets the source channel for bus B1 CAN decoding. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Source channel for CAN decoding. |
:BUS:B1:CAN:STANDARDset / query
Sets the CAN standard for bus 1. The factory default is CAN2X.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | CAN2X | CAN standard selection. |
:BUS:B1:DISPLAY:FORMATset / query
Sets the display format for bus B1. The factory default is HEXADECIMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| format | enum | HEXADECIMAL | Display format setting. |
:BUS:B1:DISPLAY:TYPEset / query
Sets the bus display type for bus B1. The factory default is BUS.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | BUS | Bus display type. |
:BUS:B1:FLEXRAY:BITRATEset / query
Sets the FlexRay bus bitrate. The factory default is 10000000.
| Name | Type | Values | Description |
|---|---|---|---|
| bitrate | integer | Hz | FlexRay bus bitrate. |
:BUS:B1:FLEXRAY:CHANNELset / query
Sets the FLEXRAY channel selection for bus B1. The factory default is A.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | enum | A | Selects the FLEXRAY channel. |
:BUS:B1:FLEXRAY:SIGNALset / query
Sets the default FlexRay signal selection for bus B1. The factory default is BDIFFBP.
:BUS:B1:FLEXRAY:SOURCEset / query
Sets the source channel for FlexRay bus B1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Source channel for the FlexRay bus. |
:BUS:B1:I2C:ADDRESS:RWINCLUDEset / query
Sets whether the I2C address is included in read/write operations for bus B1. The factory default is 0.
:BUS:B1:I2C:CLOCK:SOURCEset / query
Sets the source for the I2C clock signal on bus B1. The factory default is CH1.
:BUS:B1:I2C:DATA:SOURCEset / query
Sets the source for the I2C data signal on bus B1. The factory default is CH2.
:BUS:B1:LABELset / query
Sets the label for bus B1. The factory default is "Parallel".
:BUS:B1:LIN:BITRATEset / query
Sets the LIN bus bit rate. The factory default is 19200.
:BUS:B1:LIN:IDFORMATset / query
Sets the LIN bus ID format for bus B1. The factory default is NOPARITY.
:BUS:B1:LIN:POLARITYset / query
Sets the LIN bus polarity for bus B1. The factory default is NORMAL.
:BUS:B1:LIN:SAMPLEPOINTset / query
Sets the LIN sample point for bus B1. The factory default is 50.
:BUS:B1:LIN:SOURCEset / query
Sets the source channel for LIN bus B1 decoding.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Source channel for the LIN bus. |
:BUS:B1:LIN:STANDARDset / query
Sets the LIN standard for bus B1. The factory default is V2X.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | V2X | LIN standard selection. |
:BUS:B1:MIL1553B:POLARITYset / query
Sets the polarity for the MIL-STD-1553B bus decode in bus B1. The factory default is NORMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | NORMAL | Polarity setting for the MIL-STD-1553B bus decode. |
:BUS:B1:MIL1553B:RESPONSETIME:MAXIMUMset / query
Sets the MIL-STD-1553B response time maximum for bus B1. The factory default value shown is 12.0000E-6.
:BUS:B1:MIL1553B:RESPONSETIME:MINIMUMset / query
Sets the MIL-STD-1553B response time minimum for bus B1. The factory default is 4.0000E-6.
:BUS:B1:MIL1553B:SOURCEset / query
Sets the source channel for MIL-STD-1553B bus decoding on bus B1. The factory default is CH1.
:BUS:B1:PARALLEL:BIT10:SOURCEset / query
Sets the source assigned to parallel bus bit 10. The factory default is D10.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | D10 | Source assigned to bit 10. |
:BUS:B1:PARALLEL:CLOCK:EDGEset / query
Sets or shows the edge selection for the parallel bus clock in bus B1. The factory default is RISING.
:BUS:B1:PARALLEL:CLOCK:ISCLOCKEDset / query
Sets or returns whether the parallel bus clock is locked. Factory default is NO.
enum - Returns whether the parallel bus clock is locked.
:BUS:B1:PARALLEL:CLOCK:SOURCEset / query
Sets the source for the parallel bus clock. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Clock source. |
:BUS:B1:PARALLEL:WIDTHset / query
Sets the parallel bus width for bus B1. The factory default is 16.
:BUS:B1:POSITIONset / query
Sets the position of bus B1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Bus position value. |
:BUS:B1:RS232C:BITRATEset / query
Sets the RS232C bitrate for bus B1. The factory default is 9600.
| Name | Type | Values | Description |
|---|---|---|---|
| bitrate | integer | 1 | RS232C bitrate for bus B1. |
:BUS:B1:RS232C:DATABITSset / query
Sets the number of data bits for BUS:B1 RS232C bus decoding. The factory default is 8.
| Name | Type | Values | Description |
|---|---|---|---|
| databits | integer | 5 - 8 | Number of data bits. |
:BUS:B1:RS232C:DELIMITERset / query
Sets the RS232C delimiter for bus B1. The factory default is LF.
:BUS:B1:RS232C:DISPLAYMODEset / query
Sets the RS232C display mode for bus B1. The factory default is FRAME.
:BUS:B1:RS232C:PARITYset / query
Sets the RS232C parity setting for bus B1. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| parity | enum | NONE | Parity mode for the RS232C bus. |
:BUS:B1:RS232C:POLARITYset / query
Sets the polarity used for the RS-232C bus decode on bus B1. The factory default is NORMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | NORMAL | Polarity setting for RS-232C bus decode. |
:BUS:B1:RS232C:RX:SOURCEset / query
Sets the RS232C receive source for bus B1. The factory default is OFF.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | OFF | RS232C receive source selection. |
:BUS:B1:RS232C:TX:SOURCEset / query
Sets the source for the B1 RS232C transmit signal. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Transmit source. |
:BUS:B1:SPI:BITORDERset / query
Sets the bit order used for SPI bus decoding on bus 1. Factory default is MSB.
| Name | Type | Values | Description |
|---|---|---|---|
| order | enum | MSB | Bit order for SPI decoding. |
:BUS:B1:SPI:CLOCK:POLARITYset / query
Sets the SPI clock polarity for bus B1. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | RISE | SPI clock polarity setting. |
:BUS:B1:SPI:CLOCK:SOURCEset / query
Sets the source of the SPI clock for bus B1. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Clock source. |
:BUS:B1:SPI:DATA:IN:POLARITYset / query
Sets the polarity for SPI input data on bus B1. Factory default is HIGH.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | HIGH | LOW | Polarity of the SPI data input signal. |
:BUS:B1:SPI:DATA:IN:SOURCEset / query
Sets the source for SPI input data on bus B1. The factory default is OFF.
:BUS:B1:SPI:DATA:OUT:POLARITYset / query
Sets the SPI data output polarity for bus B1. The factory default is HIGH.
:BUS:B1:SPI:DATA:OUT:SOURCEset / query
Sets the source channel for SPI bus B1 MOSI/MISO output data. The factory default is CH3.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH3 | Source channel for the SPI data output. |
:BUS:B1:SPI:DATA:SIZEset / query
Sets the SPI data size for bus B1. The factory default is 8.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 0 - 255 | SPI data size. |
:BUS:B1:SPI:IDLETIMEset / query
Sets the SPI idle time for bus B1. The factory default is 5.0000E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| idletime | real | s | SPI idle time. |
:BUS:B1:SPI:SELECT:POLARITYset / query
Sets the polarity of the SPI select signal for bus B1. The factory default is LOW.
:BUS:B1:SPI:SELECT:SOURCEset / query
Sets the source for SPI select. The factory default is CH2.
:BUS:B1:STATEset / query
Sets or returns the state of bus 1. The factory default is 0.
:BUS:B1:TYPEset / query
Sets the bus type for bus B1. The factory default is PARALLEL.
:BUS:B1:USB:BITRATEset / query
Sets the USB bus bitrate mode for bus B1. The factory default is FULL.
:BUS:B1:USB:PROBEset / query
Sets the USB probe mode for bus 1. The factory default is DIFFERENTIAL.
| Name | Type | Values | Description |
|---|---|---|---|
| probe | enum | DIFFERENTIAL | USB probe mode. |
:BUS:B1:USB:SOURCE:DIFFERENTIALset / query
Sets the USB differential source for bus B1. Factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | USB differential source. |
:BUS:B1:USB:SOURCE:DMINUSset / query
Sets the USB differential minus source for bus B1. The factory default is CH2.
:BUS:B1:USB:SOURCE:DPLUSset / query
Selects the source used for the USB D+ signal on bus B1. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | USB D+ source channel. |
:BUS:LOWERTHRESHOLD:CH1set / query
Sets the lower threshold for the specified channel used by bus decoding. The factory default for CH1 is 0.0E+0.
:BUS:LOWERTHRESHOLD:MATHset / query
Sets the lower threshold for the selected bus source. The factory default for BUS:LOWERTHRESHOLD:MATH is 0.0E+0.
:BUS:LOWERTHRESHOLD:REF1set / query
Sets the lower threshold for the selected bus source reference. The factory default for :BUS:LOWERTHRESHOLD:REF1 is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| reference | real | - | Lower threshold value for REF1. |
:BUS:UPPERTHRESHOLD:CH1set / query
Sets the upper threshold for the specified bus source channel. The factory default for CH1 is 800.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| CH1 | real | V | Upper threshold value for CH1. |
:BUS:UPPERTHRESHOLD:MATHset / query
Sets the upper threshold for the specified source. The factory default for the MATH source is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | CH2 | CH3 | CH4 | MATH | REF1 | REF2 | REF3 | Selects the source whose upper threshold is set. |
:BUS:UPPERTHRESHOLD:REF1set / query
Sets the upper threshold for the selected bus source reference. The factory default for REF1 is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| ref | enum | REF1 | Reference bus source to which the upper threshold applies. |
Queries the cursor source for plot cursor A.
enum - Returns the source setting for plot cursor A.
Queries the cursor source for plot cursor B.
enum - Returns the cursor source for plot cursor B.
Queries the delta V over delta T cursor readout value of the specified cursor in the specified view.
real - The delta V over delta T cursor readout value of the specified cursor in the specified view.
:DISplay:REFFFTView<x>:CURSor:FUNCtionset / query
Sets or queries the cursor type of the specified cursor in the specified view.
Sets or queries the vertical cursor A position of the specified cursor in the specified view.
Queries cursor A vertical units of the specified cursor in the specified view.
enum - Returns the vertical units for cursor A.
Sets or queries the vertical cursor B position of the specified cursor in the specified view.
Queries the cursor B vertical units of the specified cursor in the specified view.
enum - Returns the cursor B vertical units for the specified REFFFT view cursor.
Queries the delta V cursor readout value of the specified cursor in the specified view.
returns - Returns the delta V cursor readout value of the specified cursor in the specified view.
:DISplay:REFFFTView<x>:CURSor:MODeset / query
Sets or queries the cursor tracking mode of the specified cursor in the specified view.
Queries the one over delta T cursor readout value of the specified cursor in the specified view.
numeric - Returns the one over delta T cursor readout value of the specified cursor in the specified view.
:DISplay:REFFFTView<x>:CURSor:ROLOCATIONset / query
Sets or queries the location to display the specified Reference FFT plot cursor readouts, either in the plot graticule or in a badge in the Results Bar.
| Name | Type | Values | Description |
|---|---|---|---|
| location | enum | - | Location to display the cursor readouts. |
Sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Sets or queries the vertical cursor A position of the specified cursor in the specified view.
Sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Sets or queries the vertical cursor B position in the specified Reference FFT view.
:DISplay:REFFFTView<x>:CURSor:SPLITMODEset / query
Sets or queries whether both cursors have same or different source.
:DISplay:REFFFTView<x>:CURSor:STATEset / query
Sets or queries the visible state of the cursor of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | - | Visible state of the cursor. |
Sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Sets or returns the waveform cursor B position in the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Cursor B position in the specified plot view. |
Queries the delta T cursor readout value of the specified cursor in the specified view.
real - Returns the delta T cursor readout value of the specified cursor in the specified view.
Queries cursor A vertical units of the specified cursor in the specified view.
enum - Returns the cursor A vertical units of the specified cursor in the specified view.
Queries the value of the cursor A horizontal position.
real - The cursor A horizontal position value.
Sets or returns the waveform cursor A position in the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Waveform cursor A position. |
Queries the value of the cursor A vertical position.
real - Returns the cursor A vertical position value.
Queries the value of the cursor B horizontal position.
real - The value of the cursor B horizontal position.
Sets or returns the waveform cursor B position in the specified plot view.
Queries the value of the cursor B vertical position.
real - The cursor B vertical position value.
Returns the noise density of the selected RF trace at the Cursor A position.
real - Noise density of the selected RF trace at the Cursor A position.
:DISplay:SPECView<x>:CURSor:CURSOR:ASOUrceset / query
Sets or queries the Cursor A source in the Spectrum View.
Returns the noise density of the selected RF trace at the Cursor B position when in Absolute mode, or the phase noise when in Delta mode.
real - Noise density of the selected RF trace at the Cursor B position in Absolute mode, or phase noise in Delta mode.
:DISplay:SPECView<x>:CURSor:CURSOR:BSOUrceset / query
Sets or queries the Cursor B source in the Spectrum View.
Queries the horizontal bar Cursor A vertical position in the Spectrum View, where it crosses the spectrum signal.
real - The horizontal bar Cursor A vertical position in the Spectrum View.
Queries the horizontal bar Cursor A amplitude units in the Spectrum View.
Queries the horizontal bar Cursor B vertical position where it crosses the spectrum signal in the Spectrum View.
real - Returns the horizontal bar Cursor B vertical position where it crosses the spectrum signal in the Spectrum View.
Queries the horizontal bar Cursor B amplitude units in the Spectrum View.
enum - Returns the amplitude units for horizontal bar Cursor B in the Spectrum View.
:DISplay:SPECView<x>:CURSor:CURSOR:READoutset / query
Sets or queries the Cursor B readout type in the Spectrum View.
:DISplay:SPECView<x>:CURSor:CURSOR:SPLITMODEset / query
Sets or queries whether both Spectrum View cursors have the same or different sources.
:DISplay:SPECView<x>:CURSor:CURSOR:STATEset / query
Sets or queries the visibility state of the cursors in the Spectrum View.
Sets or queries the Cursor A vertical position in the Spectrum View.
Sets or queries the Cursor B horizontal position in the Spectrum View.
Queries the cursor horizontal units in the Spectrum View.
Sets or queries the Cursor A vertical position in the Spectrum View.
Sets or queries the Cursor B vertical position in the Spectrum View.
Queries the cursor parameters for the specified cursor in the specified Waveform View.
string - Returns the cursor parameters for the specified cursor in the specified Waveform View.
Queries the cursor parameters for the specified Waveform View.
string - Returns the cursor parameters for the specified Waveform View.
:DISplay:WAVEView:CURSor:CURSOR1:ROLOCATIONset / query
Sets or queries where Waveform View cursor readouts are displayed. The readouts can appear in the Waveform View graticule or in a badge in the Results Bar.
Sets or queries the cursor A source of the specified cursor in the specified Waveform View.
Sets or queries the cursor B source of the specified cursor in the specified Waveform View.
Returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View.
returns - Returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View.
Sets or queries the cursor mode of the specified cursor in the specified Waveform View. The mode can be SCREEN or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SCREEN | DATA | Cursor mode to set or query. |
Sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Vertical cursor A position. |
Queries the cursor A vertical units of the specified cursor in the specified Waveform View.
enum - Returns the cursor A vertical units for the specified cursor in the specified Waveform View.
Sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View.
Queries the cursor B vertical units of the specified cursor in the specified Waveform View.
enum - Returns the cursor B vertical units for the specified cursor in the specified Waveform View.
Sets or queries the delta V cursor readout value over the history period.
real (V) - Returns the delta V cursor readout value over the history period.
:DISplay:WAVEView<x>:CURSor:CURSOR<x>:MODeset / query
Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View.
enum - Returns the current cursor tracking mode.
Returns the one over delta T cursor readout value of the specified cursor in the specified Waveform View.
real - One over delta T cursor readout value of the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View.
Sets or queries the cursor source mode in the specified view.
Queries all values (Time, Voltage, Delta) associated with all the active sources in the Waveform View.
string - All values (Time, Voltage, Delta) associated with all the active sources in the Waveform View.
Queries the vertical waveform value at the cursor A position in the specified Waveform View.
returns - Returns the vertical waveform value at the cursor A position in the specified Waveform View.
Queries the vertical waveform value at the cursor B position in the specified Waveform View.
real - Returns the vertical waveform value at the cursor B position in the specified Waveform View.
:DISplay:WAVEView<x>:CURSor:CURSOR<x>:STATEset / query
Sets or queries the visible state of the cursor of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | - | Visible state of the cursor. |
Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Queries the delta T cursor readout value of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Waveform View and cursor index. |
real - Returns the delta T cursor readout value for the specified cursor in the specified Waveform View.
Queries cursor A vertical units of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Waveform View and cursor index placeholder. |
string - Returns cursor A vertical units for the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
:DISplay:PLOTView<x>:YAXIS:SCALEset / query
Sets or queries the vertical scale setting for applicable plots (Linear or Log) in the specified plot view.
:DISplay:REFFFTView<x>:AUTOScaleset / query
Sets or queries the enabled state of auto-scale for plots.
enum - Returns the enabled state of auto-scale for plots.
:DISplay:REFFFTView<x>:GRIDlinesset / query
Sets or returns the grid lines setting of the plot.
:DISplay:REFFFTView<x>:REF:REF<x>:STATEset / query
Sets or queries the state of the specified reference waveform in the specified Waveform View.
enum - Returns the state of the specified reference waveform.
:DISplay:REFFFTView<x>:XAXIS:SCALEset / query
Sets or queries the x-axis scale setting for REFFFT.
:DISplay:SELect:BUSset / query
Sets or queries the overall selected bus.
returns - The slice does not state the returned value.
:DISplay:SELect:REFerenceset / query
Sets or queries the overall selected reference waveform.
string - Returns the overall selected reference waveform.
:DISplay:SELect:SOUrceset / query
Sets or queries the overall selected source.
enum - Returns the selected source.
:DISplay:SELect:SPECView<x>:SOUrceset / query
Sets or queries the spectrum trace source selected in the specified Spectrum View window.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | - | Source channel to select in the Spectrum View window. |
:DISplay:SELect:VIEWset / query
Sets or queries the selected view.
enum - Returns the selected view.
:DISplay:SELect:WAVEView<x>:SOUrceset / query
Sets or queries the selected source in the given waveview.
string - Returns the selected source in the given waveview.
:DISplay:SPECView<x>:CH<x>:VERTical:POSitionset / query
Sets or queries the vertical position of the specified channel in the specified Spectrum View.
:DISplay:SPECView<x>:CH<x>:VERTical:SCAleset / query
Sets or queries the vertical scale of the specified channel in the specified Spectrum View.
:DISplay:SPECView<x>:GRAticuleset / query
Sets or queries the type of graticule that is displayed.
:DISplay:SPECView<x>:HORZset / query
Sets or queries the horizontal display scaling of the Spectrum View window.
:DISplay:SPECView<x>:INTENSITy:GRATiculeset / query
Sets or queries the graticule saturation level in the specified Spectrum View.
returns
:DISplay:SPECView<x>:INTENSITy:WAVEformset / query
Sets or queries the waveform saturation level in the specified Spectrum View.
:DISplay:SPECView<x>:VIEWStyleset / query
Sets or queries the waveform layout style used by the display.
enum - Returns the waveform layout style used by the display.
:DISplay:VARpersistset / query
Sets or queries the persistence decay time.
:DISplay:WAVEformset / query
Globally enables or disables the waveform display.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the waveform display. |
:DISplay:WAVEView<x>:CH<x>:STATEset / query
Sets or queries the state of the specified channel in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the waveform view channel number. |
| state | enum | - | Controls whether the specified channel is displayed. |
enum - Returns the state of the specified channel in the specified Waveform View.
:DISplay:WAVEView<x>:CH<x>:VERTical:POSitionset / query
Sets or queries the vertical position of the specified channel in the specified Waveform View in divisions.
:DISplay:WAVEView<x>:CH<x>:VERTical:SCAleset / query
Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View.
:DISplay:WAVEView<x>:CH<x>_D<x>:STATEset / query
Sets or queries the display state of the specified digital channel in the specified Waveform View.
:DISplay:WAVEView<x>:CH<x>_DALL:STATEset / query
Sets or queries the display state of the specified digital channels in the specified Waveform View.
Sets or queries the vertical position of the specified digital channel in the specified Waveform View in divisions.
:DISplay:WAVEView<x>:FILTerset / query
Sets or queries the type of interpolation filter for the display.
:DISplay:WAVEView<x>:GRAticuleset / query
Selects or queries the type of graticule that is displayed.
:DISplay:WAVEView<x>:INTENSITy:GRATiculeset / query
Sets or queries the graticule saturation level in the specified Waveform View.
:DISplay:WAVEView<x>:INTENSITy:WAVEformset / query
Sets or queries the waveform saturation level in the specified Waveform View.
:DISplay:WAVEView<x>:MATH:MATH<x>:AUTOScaleset / query
Sets or queries whether the specified math waveform gets auto-scaled when the math equation changes within the specified Waveform View.
enum - Returns whether the specified math waveform is auto-scaled when the math equation changes within the specified Waveform View.
:DISplay:WAVEView<x>:PLOT:PLOT<x>:AUTOScaleset / query
Sets or queries whether the specified trend waveform gets auto-scaled when the waveform changes within the specified Waveform View.
:DISplay:WAVEView<x>:PLOT:PLOT<x>:STATEset / query
Sets or queries the state of the specified trend waveform in the specified Waveform View.
enum - Returns the state of the specified trend waveform in the specified Waveform View.
Sets or queries the vertical position of the specified time trend in the specified Waveform View in divisions.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 8 | Specifies the Waveform View or plot index. |
Sets or queries the vertical scale of the specified time trend in the specified Waveform View in volts per division.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Specifies the PLOT<x> item within the selected Waveform View. |
:DISplay:WAVEView:GRIDTYPEset / query
Sets or queries the Waveform View graticule mode. The mode can be Fixed or Moveable.
enum - Returns the Waveform View graticule mode.
:DISplay:WAVEView<x>:BUS:B<x>:STATEset / query
Sets or queries the state of the specified bus in the specified Waveform View.
enum - Returns the bus state.
Sets or queries the vertical position of the specified bus in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Waveform View number. |
| b | integer | 1 - 8 | Bus number. |
:DISplay:WAVEView<x>:REF:REF<x>:STATEset / query
Sets or queries the state of the specified reference waveform in the specified Waveform View.
Sets or queries the vertical position in divisions of the specified reference waveform.
Sets or queries the vertical scale of the specified reference waveform.
:DISplay:WAVEView<x>:REF<x>_DALL:FRAMeset / query
Sets or returns the selected frame of the specified digital ref.
Sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Specifies the Waveform View trace number. |
real (divisions) - Returns the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.
Sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View. The scale is expressed in divisions.
Sets or queries the vertical position of the specified Magnitude vs. Time trace in the Waveform View, in divisions.
Sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View. The scale is expressed in Volts, Watts, or dB per division.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 16 | Waveform View index. |
| x | integer | 1 - 16 | RF magnitude trace index. |
real (divisions) - The vertical scale in divisions per unit, or the current setting.
Sets or queries the vertical position of the specified Phase vs. Time trace in the Waveform View, in divisions.
Sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View, in degrees per division.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Waveform View index. |
real (degrees/division) - The vertical scale of the specified Phase vs. Time trace, in degrees per division.
:DISplay:WAVEView<x>:STYleset / query
Sets or queries how waveforms are displayed for analysis mode.
:DISplay:WAVEView<x>:VIEWStyleset / query
Sets or queries the waveform layout style used by the display.
:DISplay:WAVEView<y>:REF:REF<x>:FRAMeset / query
Sets or returns the selected frame of the specified analog ref.
:DISplay:SELect:MATHset / query
Sets or queries the overall selected math.
:DISplay:WAVEView<x>:MATH:MATH<x>:STATEset / query
Sets or queries the state of the specified math waveform in the specified waveform view.
Sets or queries the vertical position in divisions of the specified math waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | divisions | Vertical position of the specified math waveform. |
real (divisions) - Returns the vertical position in divisions of the specified math waveform.
Sets or queries the vertical scale of the specified math waveform.
:DISplay:PLOTView<x>:ZOOM:XAXIS:FROMset / query
Sets or queries the start of the zoom x-axis in the specified plot view.
returns
:DISplay:PLOTView<x>:ZOOM:XAXIS:TOset / query
Sets or queries the end of the zoom x-axis in the specified plot view.
returns
:DISplay:PLOTView<x>:ZOOM:YAXIS:FROMset / query
Sets or queries the start of the zoom y-axis in the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| xopt | integer | 1 - 16 | Specifies the plot view number. |
real - Returns the start of the zoom y-axis in the specified plot view.
:DISplay:PLOTView<x>:ZOOM:YAXIS:TOset / query
Sets or queries the end of the zoom y axis in the specified plot view.
returns - The command sets or queries the end of the zoom y axis in the specified plot view.
:DISplay:REFFFTView<x>:ZOOM:XAXIS:FROMset / query
Sets or returns the left edge of the zoom x-axis in the specified plot view.
real - The left edge of the zoom x-axis in the specified plot view.
:DISplay:REFFFTView<x>:ZOOM:XAXIS:TOset / query
Sets or queries the right edge of the zoom x-axis in the specified plot view.
real - The right edge of the zoom x-axis in the specified plot view.
:DISplay:REFFFTView<x>:ZOOM:YAXIS:FROMset / query
Sets or queries the left edge of the zoom x-axis in the specified plot view.
returns - Returns the left edge of the zoom x-axis in the specified plot view.
:DISplay:REFFFTView<x>:ZOOM:YAXIS:TOset / query
Sets or queries the end of the zoom y-axis in the specified plot view.
returns
Sets or queries the horizontal zoom position of the specified zoom in the specified Waveform View. The zoom waveform displays around this position.
Sets or queries the zoom horizontal scale factor, of the specified zoom in the specified Waveform View, in which the zoom waveform is displayed.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the Waveform View number. |
| x | integer | - | Specifies the zoom number in the Waveform View. |
real - Returns the zoom horizontal scale factor for the specified zoom in the specified Waveform View.
Sets or queries the zoom window horizontal scale in the specified Waveform View.
:DISplay:WAVEView<x>:ZOOM:ZOOM<x>:STATeset / query
Sets or queries the specified zoom in the specified Waveform View on or off.
enum - Returns whether the specified zoom in the specified Waveform View is on or off.
Sets or queries the vertical position of the specified zoom in the specified Waveform View, in which the zoom waveform is displayed.
Sets or queries the zoom vertical scale factor of the specified waveform for the specified zoom in the specified Waveform View.
Queries the zoom parameters of the specified zoom in the specified Waveform View.
returns - Returns the zoom parameters of the specified zoom in the specified Waveform View.
Queries the zoom parameters of the specified Waveform View.
returns - Returns the zoom parameters of the specified Waveform View.
:DISplay:{CH<x>|MATH<x>|REF<x>}:INVERTColorset / query
Sets or queries the Inverted mode color of the specified channel, math waveform, or reference waveform. One of 48 unique colors can be assigned and remains in effect until reset.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | discrete | - | Specifies the input channel for which the waveform color is changed. |
| math | discrete | - | Specifies the math waveform for which the waveform color is changed. |
| reference | discrete | - | Specifies the reference waveform for which the waveform color is changed. |
| color | integer | 0 - 47 | Color index to assign to the specified waveform. |
string - Returns the current inverted waveform color setting as a color token such as COLOR2.
DISplay:CH1:INVERTColor COLOR23 DISplay:REF3:INVERTColor?
:DISplay?query
Returns the current Display settings.
string - Returns the current Display settings.
:DISplay:COLorsset / query
Sets or queries the color mode for the graticule and waveform display.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NORMal | INVERTed | Color mode for the graticule and waveform display. |
enum - Returns the current display color mode.
DISPLAY:COLORS NORMAL DISPLAY:COLORS? might return DISPLAY:COLORS INVERTED indicating the display colors are inverted.
:DISplay:GLObal:B<x>:STATEset / query
Sets or queries the global state of the specified bus in the waveform view. True/On turns the source on; false/Off turns it off. The command only works if the specified bus is already added.
| Name | Type | Values | Description |
|---|---|---|---|
| state | boolean | - | Global display state of the specified bus. |
boolean - Returns the global state of the specified bus in the waveform view.
:DISplay:{CH<x>|MATH<x>|REF<x>}:NORMALColorset / query
Sets or queries the normal mode color of the specified channel, math waveform, or reference waveform. One of 48 unique colors can be assigned and remains in effect until the colors are reset.
| Name | Type | Values | Description |
|---|---|---|---|
| source | discrete | - | Specifies the input channel, math waveform, or reference waveform to change. |
| COLOR<x> | integer | 0 - 47 | Specifies the color to assign to the selected waveform. |
string - Returns the current normal mode color of the specified waveform, indicated as a COLOR<x> value.
DISplay:CH1:NORMALColor COLOR13 sets the channel 1 inverted waveform color to the value 23. DISplay:REF3:NORMALColor? might return COLOR2, indicating that the inverted waveform color setting for reference waveform 3 is 2.
:DISplay:GLObal:CH<x>:STATEset / query
Sets or queries the global display state of the specified channel. Setting it true turns on the source in the waveform view; setting it false turns it off. This command works only if the specified channel is already added.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NR1 | OFF | ON | Global display state for the specified channel. |
enum - Returns the current global display state of the specified channel as a numeric display status, with 0 meaning not displayed and 1 meaning displayed.
DISplay:GLObal:CH1:STATE OFF turns off the display of channel 1. DISplay:GLObal:CH1:STATE? might return DISPLAY:GLOBAL:CH1:STATE 0 indicating that channel 1 is not displayed.
:DISplay:GLObal:MATH<x>:STATEset / query
Sets or queries the global display state of the specified math waveform. True (On or nonzero) turns the source on in the waveform view; false (Off or 0) turns it off. This command only works if the specified math waveform is already added.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NR1 | OFF | ON | Display state to set for the specified math waveform. |
:DISplay:GLObal:PLOT<x>:STATEset / query
Sets or queries the global display mode of the specified time trend plot. Turning it on displays the plot in the waveform view; turning it off hides it.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | integer | - | Plot number. |
| stateopt | enum | NR1 | OFF | ON | Display state; <NR1> = 0 disables display, any other value enables display. ON enables display and OFF disables display. |
DISplay:GLObal:PLOT1:STATE ON DISplay:GLObal:PLOT1:STATE? might return :DISPLAY:GLOBAL:PLOT1:STATE1 indicating plot 1 is displayed.
:DISplay:GLObal:REF<x>:STATEset / query
Sets or queries the global display state of the specified reference waveform. This command only works if the specified reference waveform is already added.
| Name | Type | Values | Description |
|---|---|---|---|
| ref<x> | integer | - | The reference waveform number. |
| state | enum | NR1 | OFF | ON | Turns display on or off, or accepts a numeric value where 0 disables display and any other value enables it. |
:DISplay:INTENSITy:BACKLightset / query
Sets or queries the display backlight intensity setting.
| Name | Type | Values | Description |
|---|---|---|---|
| level | enum | LOW | MEDium | HIGH | Selects the backlight brightness level. |
enum - Returns the current display backlight intensity setting.
DISPLAY:INTENSITY:BACKLIGHT LOW DISPLAY:INTENSITY:BACKLIGHT?
:DISplay:INTENSITy:BACKLight:AUTODim:ENAbleset / query
Sets or queries the state of the display auto-dim feature. By default it is enabled. Once the backlight has dimmed, any button push, knob turn or mouse movement returns the backlight value to the value set by :DISplay:INTENSITy:BACKLight.
:DISplay:INTENSITy?query
This query-only command returns the waveform saturation level and screen saver settings.
string - Returns the intensity setting; the example shows a response such as :DISPLAY:INTENSITY:BACKLIGHT1.
:DISplay:INTENSITy:BACKLight:AUTODim:TIMeset / query
Sets or queries the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display. The time can range from 10 to 1440 minutes, with a default of 10 minutes.
| Name | Type | Values | Description |
|---|---|---|---|
| time | integer | 10 - 1440 | Amount of time to wait before automatically dimming the display. |
DISPLAY:INTENSITY:BACKLIGHT:AUTODIM:TIME 30 DISPLAY:INTENSITY:BACKLIGHT:AUTODIM:TIME?
:DISplay:MATHFFTView<x>:AUTOScaleset / query
Sets or returns the enabled state of autoscale for Math/FFT waveforms.
enum - Returns the enabled state of autoscale for the specified Math/FFT waveform view.
Queries the Math-FFT waveform view source for cursor A.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
enum - Returns the source for cursor A in the specified Math-FFT waveform view.
DISplay:MATHFFTView1:CURSor:ASOUrce? might return DISPLAY:MATHFFTVIEW1:CURSOR:ASOURCE MATH1, indicating the source is MATH 1.
Queries the Math-FFT waveform view source for cursor B.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Math-FFT waveform number. |
string - Returns the source of cursor B for the specified Math-FFT waveform view.
DISplay:MATHFFTView5:CURSor:BSOUrce? might return :DISPLAY:MATHFFTVIEW5:CURSOR:BSOURCE MATH5, indicating that the source is Math waveform MATH 5.
Returns the ΔY/ΔX cursor readout value for the specified Math-FFT view. The command may time out if the current cursor is set to horizontal mode.
real - The ΔY/ΔX cursor readout value.
DISplay:MATHFFTView<x>:CURSor:DDT? might return :DISPLAY:MATHFFTVIEW1:CURSOR:DDT 14.0056E-9,
:DISplay:MATHFFTView<x>:CURSor:FUNCtionset / query
Sets or queries the cursor type for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| function | enum | WAVEform | VBArs | HBArs | SCREEN | Cursor type to display for the specified Math-FFT view. |
enum - Returns the current cursor type for the specified Math-FFT view.
DISplay:MATHFFTView5:CURSor:FUNCtion HBARS DISplay:MATHFFTView1:CURSor:FUNCtion?
Sets or queries the cursor type for the specified Math-FFT view.
enum - Returns the current cursor type for the specified Math-FFT view.
DISplay:MATHFFTView5:CURSor:FUNCtion HBARS DISplay:MATHFFTView1:CURSor:FUNCtion?
Sets or returns the position of horizontal cursor A for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Position value for horizontal cursor A. |
Queries the position of horizontal cursor A for the specified Math-FFT view.
real - Returns the cursor position of the specified cursor in the specified Math-FFT view.
DISplay:MATHFFTView4:CURSor:HBArs:APOSition? might return :DISPLAY:MATHFFTVIEW4:CURSOR:HBARS:APOSITION -274.2247E-3, indicating the A cursor position is –274.2247E-3.
Queries the vertical units of horizontal cursor A for the specified Math-FFT view.
string - Returns the vertical units of horizontal cursor A for the specified Math-FFT view.
Sets or returns the position of horizontal cursor B for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | - | Vertical cursor B position for the specified Math-FFT view. |
real - Returns the position of horizontal cursor B for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:HBArs:BPOSition 50e-3 sets the position to 0.05 vertical units. DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? might return DISPLAY:MATHFFTVIEW1:CURSOR:HBARS:BPOSITION -40.4061, indicating the position is –40.4061 vertical units.
Queries the vertical units of horizontal cursor B for the specified Math-FFT view.
string - Returns the vertical units of horizontal cursor B for the specified Math-FFT view.
Queries the horizontal cursor delta value for the specified Math-FFT view.
real - Returns the horizontal cursor’s delta value for the specified Math-FFT view.
:DISplay:MATHFFTView<x>:CURSor:MODeset / query
Sets or queries the cursor mode for the specified Math-FFT view. The example shows the mode can be set to INDEPENDENT and queried back.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Math-FFT view number. |
DISplay:MATHFFTView1:CURSor:MODe INDEPENDENT allows independent adjustment of the two cursors. DISplay:MATHFFTView1:CURSor:MODe? might return :DISPLAY:MATHFFTVIEW1:CURSOR:MODE INDEPENDENT, indicating the mode is set to independent.
Queries the cursor mode of the specified Math-FFT view. The return indicates the current mode setting, such as INDEPENDENT.
enum - Returns the current cursor mode setting for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:MODe INDEPENDENT allows independent adjustment of the two cursors. DISplay:MATHFFTView1:CURSor:MODe? might return :DISPLAY:MATHFFTVIEW1:CURSOR:MODE INDEPENDENT, indicating the mode is set to independent.
Queries the one over delta cursor readout value of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
real (s) - The one over delta time value for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? might return :DISPLAY:MATHFFTVIEW1:CURSOR:ONEOVERDELTATVALUE 2.6005E-9, indicating the one over delta time value is 2.6005 nanoseconds.
:DISplay:MATHFFTView<x>:CURSor:ROLOCATIONset / query
Sets or queries the location used to display the specified Math FFT plot cursor readouts. Readouts can be shown in the plot graticule or as a badge in the Results Bar.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT plot number. |
| location | enum | GRATICULE | BADGE | Location where Math FFT plot cursor readouts are displayed. |
enum - Returns the current cursor readout location for the specified Math FFT plot.
DISplay:MATHFFTView4:CURSor:ROLOCATION GRATICULE DISplay:MATHFFTView2:CURSor:ROLOCATION?
Sets or queries the location used to display Math-FFT plot cursor readouts, either in the plot graticule or as a badge in the Results Bar.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Math-FFT plot number. |
| location | enum | GRATICULE | BADGE | Selects where the Math FFT plot cursor readouts are displayed. |
Sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | MHz | Cursor position. |
real (MHz) - Returns the cursor position in MHz.
DISPLAY:MATHFFTVIEW1:CURSOR:SCREEN:AXPOSITION 700.000E+6 DISPLAY:MATHFFTVIEW3:CURSOR:SCREEN:AXPOSITION?
Sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.
real (MHz) - Returns the cursor position in MHz.
DISPLAY:MATHFFTVIEW1:CURSOR:SCREEN:AXPOSITION 700.000E+6 DISPLAY:MATHFFTVIEW3:CURSOR:SCREEN:AXPOSITION?
Sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The cursor A position of the specified cursor in the specified view. |
real - Returns the cursor A y-axis amplitude measurement value of the specified Math-FFT view.
DISplay:MATHFFTView2:CURSor:SCREEN:AYPOSition 1.0e0 DISplay:MATHFFTView5:CURSor:SCREEN:AYPOSition?
Sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
real - Returns the cursor A y-axis amplitude measurement value for the specified Math-FFT view.
DISplay:MATHFFTView2:CURSor:SCREEN:AYPOSition 1.0e0 DISplay:MATHFFTView5:CURSor:SCREEN:AYPOSition?
Sets the vertical cursor B x-axis waveform measurement position of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | Math-FFT waveform number. |
| <NR3> | real | MHz | Cursor position. |
Queries the horizontal cursor B position for the specified Math-FFT view. The response returns the cursor position as an NR3 numeric value.
real - Returns the horizontal cursor B position of the specified cursor in the specified view.
DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? might return :DISPLAY:MATHFFTVIEW1:CURSOR:SCREEN:BXPOSITION 2.50E+9, indicating the cursor position is 2.5 GHz.
Sets or returns the vertical cursor B y-axis amplitude measurement value of the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | - | Vertical cursor B position of the specified cursor in the specified view. |
real - Returns the vertical cursor B position in the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition -50.0e0 DISplay:MATHFFTView4:CURSor:SCREEN:BYPOSition?
Queries the vertical cursor B y-axis amplitude measurement value for the specified Math-FFT view.
real - Returns the vertical cursor B position of the specified cursor in the specified view.
DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? might return :DISPLAY:MATHFFTVIEW4:CURSOR:SCREEN:BYPOSITION -59.0460929065173, indicating the cursor position is at -59.0 dBm.
:DISplay:MATHFFTView<x>:CURSor:STATEset / query
Sets or queries the visible state of cursors for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 0 | 1 | Enables or disables the cursors for the specified Math-FFT view. |
Queries the state of the cursors for the specified Math-FFT view.
enum - Returns whether the cursors are enabled or disabled for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:STATE? might return :DISPLAY:MATHFFTVIEW1:CURSOR:STATE 1, indicating the cursors are enabled.
Sets or queries the horizontal cursor A position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | - | Vertical cursor A position in the specified view. |
real - Returns the cursor A position for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:VBArs:APOSition 500.0e6 sets the cursor A position to 500 MHz. DISplay:MATHFFTView1:CURSor:VBArs:APOSition? might return :DISPLAY:MATHFFTVIEW1:CURSOR:VBARS:APOSITION 585.533869115958E+6, indicating cursor position is 585.5 MHz.
Sets or queries the horizontal cursor A position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| value | real | - | Sets the cursor A position in the specified view. |
real - Returns the horizontal cursor A position for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:VBArs:APOSition 500.0e6 sets the cursor A position to 500 MHz. DISplay:MATHFFTView1:CURSor:VBArs:APOSition? might return :DISPLAY:MATHFFTVIEW1:CURSOR:VBARS:APOSITION 585.533869115958E+6, indicating cursor position is 585.5 MHz.
Queries the vertical cursor A measurement units for the specified Math-FFT view.
enum - Returns the cursor units for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? might return :DISPLAY:MATHFFTVIEW1:CURSOR:VBARS:UNITS"dBm", indicating the cursor units are dBm.
Sets or queries the vertical cursor B position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | - | Vertical cursor B position in the specified view. |
real - Returns the vertical cursor B position for the specified Math-FFT view.
Sets or queries the vertical cursor B position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| position | real | - | Vertical cursor B position in the specified view. |
real - Returns the vertical cursor B position for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:VBArs:BPOSition 2.0e9 DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?
Queries the vertical cursor B measurement units for the specified Math-FFT view.
string - Returns the vertical cursor B measurement units for the specified Math-FFT view.
Queries the vertical cursor’s delta T readout value for the specified Math-FFT view.
real - Returns the delta T cursor value for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:VBArs:DELTa? might return :DISPLAY:MATHFFTVIEW1:CURSOR:VBARS:DELTA 1.9144661308840E+9, indicating the deltaT cursor value is 1.9 GHz.
Sets or queries the waveform cursor A position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | The Math-FFT waveform number. |
| <NR3> | real | - | The waveform cursor A position in the specified plot view. |
real - Returns the waveform cursor A position for the specified Math-FFT view.
DISplay:MATHFFTView1:CURSor:WAVEform:APOSition 600.0e6 sets the position to 600 MHz. DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? might return :DISPLAY:MATHFFTVIEW1:CURSOR:WAVEFORM:APOSITION 25.000E+6, indicating the cursor position is 25 MHz.
Sets or queries the waveform cursor A position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
real - Returns the waveform cursor A position in the specified plot view.
DISplay:MATHFFTView1:CURSor:WAVEform:APOSition 600.0e6 DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?
Sets or queries the waveform cursor B position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | The Math-FFT waveform number. |
| position | real | - | The waveform cursor B position in the specified plot view. |
real - Returns the waveform cursor B position in the specified plot view.
DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition 2.0E+9 sets the cursor position to 2.0 GHz. DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? might return :DISPLAY:MATHFFTVIEW1:CURSOR:WAVEFORM:BPOSITION 250.0E+6, indicating the waveform cursor B position is 250 MHz.
Sets or queries the waveform cursor B position for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | The Math-FFT waveform number. |
| position | real | - | The waveform cursor B position in the specified plot view. |
real (Hz) - The waveform cursor B position. The example shows the query returning the cursor B position value.
DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition 2.0E+9 DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?
:DISplay:MATHFFTView<x>:GRIDlinesset / query
Sets or queries the grid lines setting for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HORizontal | VERTical | BOTH | Selects which grid lines are shown in the Math-FFT view. |
Returns the grid line orientation for the specified Math-FFT view. The response can indicate horizontal, vertical, or both grid lines.
enum - Returns the current grid line orientation for the specified Math-FFT view.
DISplay:MATHFFTView1:GRIDlines VERTICAL specifies vertical grid lines. DISplay:MATHFFTView1:GRIDlines? might return :DISPLAY:MATHFFTVIEW1:GRIDLINES BOTH, indicating both horizontal and vertical grid lines are displayed.
:DISplay:MATHFFTView<x>:MATH:MATH<x>:STATEset / query
Sets or queries the display state of the specified math waveform for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| state | enum | OFF | ON | <NR1> | OFF disables displaying the specified Math-FFT view; ON enables it; <NR1> = 0 disables the specified Math-FFT view and any other value enables it. |
DISplay:MATHFFTView1:MATH:MATH1:STATE ON enables the specified Math-FFT view. DISplay:MATHFFTView4:MATH:MATH4:STATE? might return :DISPLAY:MATHFFTVIEW1:MATH:MATH1:STATE 1, indicating the waveform Math-FFT 1 is displayed.
:DISplay:MATHFFTView<x>:XAXIS:SCALEset / query
Sets or queries the x-axis scale for the specified Math-FFT view. The scale can be linear or logarithmic.
enum - Returns the present x-axis scale setting for the specified Math-FFT view.
Queries the horizontal scale setting for the specified Math-FFT view. The scale can be linear or logarithmic.
enum - Returns the current horizontal scale setting for the specified Math-FFT view.
DISplay:MATHFFTView1:XAXIS:SCALE LOG specifies a logarithmic scale. DISplay:MATHFFTView1:XAXIS:SCALE? might return :DISPLAY:MATHFFTVIEW1:XAXIS:SCALE LINEAR, indicating that the scale setting is linear.
:DISplay:MATHFFTView<x>:YAXIS:SCALEset / query
Sets or queries the vertical scale setting for the specified Math-FFT view. The scale can be linear or dBm.
enum - Returns the current vertical scale setting for the specified Math-FFT view.
DISplay:MATHFFTView1:YAXIS:SCALE LINEAR specifies a linear scale. DISplay:MATHFFTView1:YAXIS:SCALE? might return :DISPLAY:MATHFFTVIEW1:YAXIS:SCALE DBM, indicating that the scale is dBm.
Sets or queries the vertical scale setting for the specified Math-FFT view. The scale can be linear or dBm.
enum - Returns the current vertical scale setting for the specified Math-FFT view.
DISplay:MATHFFTView1:YAXIS:SCALE LINEAR specifies a linear scale. DISplay:MATHFFTView1:YAXIS:SCALE? might return :DISPLAY:MATHFFTVIEW1:YAXIS:SCALE DBM, indicating that the scale is dBm.
:DISplay:MATHFFTView<x>:ZOOM:XAXIS:FROMset / query
Sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Math-FFT waveform number. |
| from | real | - | Value of the left edge of the zoom x axis in the specified plot view. |
real - Returns the x-axis value of the left edge of the zoom area for the specified Math-FFT view.
DISplay:MATHFFTView1:ZOOM:XAXIS:FROM 800.e6 sets the x axis value of the left edge of the plot view to 800 MHz. DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? might return DISPLAY:MATHFFTVIEW1:ZOOM:XAXIS:FROM781.0E+6, indicating the x axis value of the left edge of the plot view is at 781 MHz.
Sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| value | real | - | Value of the left edge of the zoom x axis in the specified plot view. |
real - Returns the x axis value of the left edge of the plot view.
DISplay:MATHFFTView1:ZOOM:XAXIS:FROM 800.e6 DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?
:DISplay:MATHFFTView<x>:ZOOM:XAXIS:TOset / query
Sets or queries the value of the right edge of the zoom area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| value | real | - | Right edge of the zoom x axis in the specified plot view. |
real - Returns the value of the right edge of the zoom x axis for the specified Math-FFT view.
DISplay:MATHFFTView1:ZOOM:XAXIS:TO 2.3E+9 DISplay:MATHFFTView1:ZOOM:XAXIS:TO? might return :DISPLAY:MATHFFTVIEW1:ZOOM:XAXIS:TO 2.343750E+9, indicating the value of the right edge of the zoom x axis is 2.34 GHz.
Sets or queries the value of the right edge of the zoom x axis for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| value | real | - | Right edge value of the zoom x axis in the specified plot view. |
real - Returns the value of the right edge of the zoom x axis for the specified Math-FFT view.
DISplay:MATHFFTView1:ZOOM:XAXIS:TO 2.3E+9 DISplay:MATHFFTView1:ZOOM:XAXIS:TO?
:DISplay:MATHFFTView<x>:ZOOM:YAXIS:FROMset / query
Sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
| value | real | - | Bottom value of the zoom y axis in the specified plot view. |
real - Returns the bottom value of the zoom y axis for the specified Math-FFT view.
DISplay:MATHFFTView1:ZOOM:YAXIS:FROM -75.0e0 DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?
Sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | Math-FFT waveform number. |
| value | real | - | Bottom value of the zoom y axis in the specified plot view. |
real - Returns the bottom value of the zoom y axis in the specified plot view.
DISplay:MATHFFTView1:ZOOM:YAXIS:FROM -75.0e0 DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? might return :DISPLAY:MATHFFTVIEW1:ZOOM:YAXIS:FROM -78.8258285893367, indicating the bottom value of the y axis is -78.8 dBm.
:DISplay:MATHFFTView<x>:ZOOM:YAXIS:TOset / query
Sets or queries the top edge value of the zoom y-axis area for the specified Math-FFT view.
| Name | Type | Values | Description |
|---|---|---|---|
| MATHFFTView<x> | integer | - | Math-FFT waveform number. |
| <NR3> | real | - | Top value of the zoom y axis in the specified plot view. |
Returns or sets the top value of the zoom y axis in the specified Math-FFT plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math-FFT waveform number. |
real - Returns the top value of the zoom y axis in the specified plot view.
DISplay:MATHFFTView1:ZOOM:YAXIS:TO 21.0E0 DISplay:MATHFFTView1:ZOOM:YAXIS:TO?
:DISplay:MEAS<x>:NAVIgate:TYPEset / query
Sets or returns the badge navigation type for WBG measurements. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ALLOCCURRENCES | FAILURES | Badge navigation type for WBG measurements. |
enum - Returns the badge navigation type for the specified WBG measurement.
DISplay:MEAS1:NAVIgate:TYPE ALLOCCURRENCES DISplay:MEAS1:NAVIgate:TYPE?
Sets or returns the badge navigation type for WBG measurements. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ALLOCCURRENCES | FAILURES | Badge navigation type for WBG measurements. |
enum - Returns the current badge navigation type for the specified WBG measurement badge navigation setting.
DISplay:MEAS1:NAVIgate:TYPE? might return :DISplay:MEAS1:NAVIgate:TYPE ALLOCCURRENCES, indicating that the badge navigation type is all occurrences.
:DISplay:PERSistenceset / query
Sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | AUTO | INFPersist | INFInite | VARpersist | CLEAR | Display persistence mode. |
Sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.
enum - Returns the current display persistence setting.
:DISplay:PERSistence:RESETset / query
Clears the persistence data that has built up over time. Persistence is valid for wave views only.
DISPLAY:PERSISTENCE:RESET clears the display of persistence data.
:DISplay:PLOTView<x>:AUTOScaleset / query
Sets or queries the enabled state of autoscale for the specified plot.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| state | enum | OFF | ON | Disables or enables the autoscale feature. |
| value | numeric | - | Any nonzero value enables autoscale; 0 disables it. |
enum - Returns the enabled state of autoscale for the specified plot.
DISplay:PLOTView1:AUTOScale OFF turns off plot autoscale.
Sets or queries the enabled state of autoscale for the specified plot.
enum - Returns the autoscale state for the specified plot.
DISplay:PLOTView1:AUTOScale OFF turns off plot autoscale.
Queries the cursor source for plot cursor A.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
string - Returns the source of plot cursor A as a plot identifier.
DISplay:PLOTView1:CURSor:ASOUrce? might return DISPLAY:PLOTVIEW1:CURSOR:ASOURCEPLOT 1 indicating the source of the cursor is plot 1.
Queries the cursor source for plot cursor B.
| Name | Type | Values | Description |
|---|---|---|---|
| PLOTView<x> | - | - | The Plot waveform number. |
integer - Indicates the source of the cursor is a plot number.
DISplay:PLOTView1:CURSor:BSOUrce? might return :DISPLAY:PLOTVIEW1:CURSOR:BSOURCEPLOT 1, indicating the B cursor source is plot 1.
Returns the delta V over delta T cursor readout value for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
returns - Delta V over delta T cursor readout value for the specified Plot view.
:DISplay:PLOTView<x>:CURSor:FUNCtionset / query
Sets or queries the cursor mode for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | WAVEFORM | VBArs | HBArs | SCREEN | Cursor mode for the specified Plot view. |
enum - Returns the current cursor mode for the specified Plot view.
DISplay:PLOTView1:CURSor:FUNCtionVBARS DISplay:PLOTView1:CURSor:FUNCtion?
Sets or queries the cursor mode for the specified Plot view. The mode can be WAVEFORM, VBArs, HBArs, or SCREEN.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | WAVEFORM | VBArs | HBArs | SCREEN | Cursor mode for the specified Plot view. |
enum - Returns the current cursor mode for the specified Plot view.
DISplay:PLOTView1:CURSor:FUNCtionVBARS DISplay:PLOTView1:CURSor:FUNCtion?
:DISplay:PLOTView<x>:CURSor:HBArs:APOSitionset / query
Sets or queries the horizontal cursor A position for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Cursor position. |
real - Returns the cursor position for the specified Plot view.
DISplay:PLOTView<x>:CURSor:HBArs:APOSition 2.0 DISplay:PLOTView<x>:CURSor:HBArs:APOSition?
Sets or queries the horizontal cursor B position for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Horizontal cursor B position. |
DISplay:PLOTView<x>:CURSor:HBArs:BPOSition 2.0 sets the cursor to 2 Volts.
Queries the horizontal cursor A vertical units for the specified Plot view.
string - Returns the A units for the specified Plot view; the example shows a quoted unit string such as "V".
DISplay:PLOTView1:CURSor:HBArs:AUNIts? might return :DISPLAY:PLOTVIEW1:CURSOR:HBARS:AUNITS"V",
:DISplay:PLOTView<x>:CURSor:HBArs:BPOSitionset / query
Sets or queries the horizontal cursor B position for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | HBArs vertical position. |
returns
DISplay:PLOTView<x>:CURSor:HBArs:BPOSition 2.0 sets the cursor to 2 Volts.
Queries the horizontal cursor B vertical units for the specified Plot view.
string - The cursor B vertical units for the specified Plot view.
DISplay:PLOTView1:CURSor:HBArs:BUNIts? might return :DISPLAY:PLOTVIEW1:CURSOR:HBARS:BUNITS "V"
Returns the HBars cursor position readout value for the specified Plot view. The example shows the returned value as a voltage.
real (V) - Returns an <NR3> value for the HBars cursor position readout.
Queries the delta V cursor readout value for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
real (V) - Returns the delta V cursor value.
DISplay:PLOTView1:CURSor:HBArs:DELTa? might return :DISPLAY:PLOTVIEW1:CURSOR:HBARS:DELTA 1.2543, indicating the delta value is 1.2543 V.
:DISplay:PLOTView<x>:CURSor:MODeset / query
Sets or queries the cursor tracking mode for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | INDEPENDENT | TRACK | Selects whether the two cursors adjust independently or track together. |
DISplay:PLOTView1:CURSor:MODeTRACK DISplay:PLOTView1:CURSor:MODe? might return :DISPLAY:PLOTVIEW1:CURSOR:MODE INDEPENDENT, indicating independent adjustment of the cursors is allowed.
Sets or queries the cursor tracking mode for the specified Plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| mode | enum | INDEPENDENT | TRACK | Cursor tracking mode; INDEPENDENT allows independent adjustment of the two cursors, and TRACK ties them together. |
enum - Returns the cursor tracking mode for the specified Plot view.
DISplay:PLOTView1:CURSor:MODeTRACK DISplay:PLOTView1:CURSor:MODe?
Returns the one over delta T cursor readout value for the specified plot waveform. The returned value is an <NR3> and may not be delta T depending on the plot units.
real - One over delta T cursor readout value for the specified plot waveform.
DISplay:PLOTView<x>:CURSor:ONEOVERDELTATVALUE? might return :DISPLAY:PLOTVIEW1:CURSOR:ONEOVERDELTATVALUE 88.2295E+6 indicating the 1 over delta time value is 88.2295 MHz.
:DISplay:PLOTView<x>:CURSor:ROLOCATIONset / query
Sets or queries the location where the specified plot cursor readouts are displayed, either in the plot graticule or as a badge in the Results Bar.
| Name | Type | Values | Description |
|---|---|---|---|
| location | enum | GRATICULE | BADGE | Display location for the plot cursor readouts. |
DISplay:PLOTView1:CURSor:ROLOCATION GRATICULE DISplay:PLOTView2:CURSor:ROLOCATION? might return DISplay:PLOTView2:CURSor:ROLOCATION BADGE, indicating that cursor readout information for plot 2 is set to display as a badge in the Results Bar.
Sets or queries the location where plot cursor readouts are displayed, either in the plot graticule or as a badge in the Results Bar.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | GRATICULE | BADGE | Selects where the plot cursor readouts are shown. |
enum - Returns the current plot cursor readout display location.
DISplay:PLOTView1:CURSor:ROLOCATION GRATICULE DISplay:PLOTView2:CURSor:ROLOCATION? might return DISplay:PLOTView2:CURSor:ROLOCATION BADGE, indicating that cursor readout information for plot 2 is set to display as a badge in the Results Bar.
Sets or queries the horizontal cursor A position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Horizontal cursor A position. |
Returns the horizontal cursor A position in the specified Plot view. The response includes the command header and the cursor position value.
real - The horizontal cursor A position.
DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:SCREEN:AXPOSITION -5.5460E-9, indicating the cursor A X position is -5.546 ns.
Sets or queries the vertical cursor A position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Vertical cursor A position. |
DISplay:PLOTView1:CURSor:SCREEN:AYPOSition 2.0 set the A cursor Y position to 2.0 Volts. DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:SCREEN:AYPOSITION 1.9035 indicating the A cursor Y position is 1.9035 V.
Sets or queries the vertical cursor A position of the specified cursor in the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Vertical cursor A position. |
real - Returns the vertical cursor A position.
DISplay:PLOTView1:CURSor:SCREEN:AYPOSition 2.0 set the A cursor Y position to 2.0 Volts. DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:SCREEN:AYPOSITION 1.9035 indicating the A cursor Y position is 1.9035 V.
Sets the horizontal cursor B position of the specified cursor in the specified plot view. The view is selected by the PLOTView<x> node.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Horizontal cursor B position. |
DISplay:PLOTView1:CURSor:SCREEN:BXPOSition 59.0E-9 sets the B cursor X position to 59.0 ns.
Sets or queries the vertical cursor B X position in the specified plot view. The query returns the current B cursor X position.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
real - Returns the B cursor X position.
Sets or queries the vertical cursor B position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Vertical cursor B position. |
DISplay:PLOTView1:CURSor:SCREEN:BYPOSition 0.589 sets the B cursor Y position to 589 mV. DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:SCREEN:BYPOSITION 589.0696E-3 indicating the B cursor Y position is 589.0696 mV.
Sets or queries the vertical cursor B position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | The vertical cursor B position. |
real - Returns the vertical cursor B position.
DISplay:PLOTView1:CURSor:SCREEN:BYPOSition 0.589 DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:SCREEN:BYPOSITION 589.0696E-3 indicating the B cursor Y position is 589.0696 mV.
:DISplay:PLOTView<x>:CURSor:SPLITMODEset / query
Sets or queries the cursor source mode in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAME | SPLIT | Specifies whether both cursors are on the same waveform or can be on different waveforms. |
Sets or queries the cursor source mode in the specified view.
enum - Returns the current cursor source mode.
:DISplay:PLOTView<x>:CURSor:STATEset / query
Sets or queries the cursor state for the specified plot waveform view. OFF disables the specified cursor, ON enables it, and <NR1> uses 0 to disable and any other value to enable.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Enables or disables the specified cursor. |
| state | integer | 0 | Numeric cursor state: 0 disables the specified cursor; any other value enables it. |
enum - Returns the cursor state for the specified plot waveform view.
DISplay:PLOTView1:CURSor:STATE OFF disables the specified cursor. DISplay:PLOTView5:CURSor:STATE? might return :DISPLAY:PLOTVIEW5:CURSOR:STATE 1, indicating cursors are on.
Enables or disables the specified cursor in the specified plot view. The query returns the cursor state as 0 or 1.
integer - Returns the cursor state for the specified cursor: 0 means disabled and any other value means enabled.
DISplay:PLOTView5:CURSor:STATE? might return :DISPLAY:PLOTVIEW5:CURSOR:STATE 1, indicating cursors are on.
:DISplay:PLOTView<x>:CURSor:VBArs:APOSitionset / query
Sets or queries the vertical cursor A position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Vertical cursor A position. |
real - Returns the vertical cursor A position.
DISplay:PLOTView1:CURSor:VBArs:APOSition 50.0E-9 DISplay:PLOTView1:CURSor:VBArs:APOSition?
Sets or queries the vertical cursor A position of the specified cursor in the specified plot view.
real - Returns the vertical cursor A position.
DISplay:PLOTView1:CURSor:VBArs:APOSition 50.0E-9 DISplay:PLOTView1:CURSor:VBArs:APOSition?
:DISplay:PLOTView<x>:CURSor:VBArs:BPOSitionset / query
Sets or queries the vertical cursor B position of the specified cursor in the specified view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Vertical cursor B position. |
Sets or queries the B position of the VBars cursor in the specified Plot waveform view. The argument <NR3> is the vertical cursor B position.
| Name | Type | Values | Description |
|---|---|---|---|
| PLOTView<x> | integer | - | Plot waveform number. |
real - The vertical cursor B position is returned.
:DISPLAY:PLOTVIEW1:CURSOR:VBARS:BPOSITION 50.0E-9 :DISPLAY:PLOTVIEW1:CURSOR:VBARS:BPOSITION? might return :DISPLAY:PLOTVIEW1:CURSOR:VBARS:BPOSITION -60.0796E-9 indicating the VBARS BPOSITION is set to 60.08 ns.
Queries the delta T cursor readout value for the specified cursor in the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Plot waveform number. |
real (s) - The deltaT cursor readout value is returned.
DISplay:PLOTView1:CURSor:VBArs:DELTa? might return :DISPLAY:PLOTVIEW1:CURSOR:VBARS:DELTA 119.7593E-9, indicating the VBARSDELTA is set to 119.76 ns.
Queries the VBArs cursor readout units for the specified plot view.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
string - The VBArs cursor readout units.
DISplay:PLOTView<x>:CURSor:VBArs:UNIts? DISplay:PLOTVIEW5:CURSOR:VBARS:UNITS "V"
Sets or queries the waveform cursor A position in the specified plot view. For XY plots, setting has no effect; for bathtub plots it controls or returns the cursor A vertical position, otherwise it controls or returns the horizontal position.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| position | real | - | Horizontal cursor A position. |
DISplay:PLOTView1:CURSor:WAVEform:APOSition -50.0E-9 sets the waveform APOSITION to -50.0 ns. DISplay:PLOTView1:CURSor:WAVEform:APOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:WAVEFORM:APOSITION -60.0796E-9 indicating the waveform APOSITION is set to -60.08 ns.
Sets or queries the waveform cursor A position in the specified plot view. For XY plots, setting has no effect; for bathtub plots it sets or returns the cursor A vertical position, and for all other plots it sets or returns the cursor A horizontal position.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Plot waveform number. |
real - Returns the waveform cursor A position for the specified view, or the vertical position in bathtub plots.
DISplay:PLOTView1:CURSor:WAVEform:APOSition -50.0E-9 sets the waveform APOSITION to -50.0 ns. DISplay:PLOTView1:CURSor:WAVEform:APOSition? might return :DISPLAY:PLOTVIEW1:CURSOR:WAVEFORM:APOSITION -60.0796E-9 indicating the waveform APOSITION is set to -60.08 ns.
Sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view. In XY plot it has no effect when setting; in bathtub plot it has no effect and the query returns invalid values.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Plot waveform number. |
| position | real | - | Horizontal cursor B position. |
real - Returns the waveform cursor B position for the specified view; in bathtub plot the query returns invalid values.
DISplay:PLOTView1:CURSor:WAVEform:BPOSition 3.0 sets the position to 3.0 V. DISplay:PLOTView5:CURSor:WAVEform:BPOSition? might return :DISPLAY:PLOTVIEW5:CURSOR:WAVEFORM:BPOSITION 2.600517840, indicating the position is 2.5 V.
Sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view. In XY plot it has no effect when setting; in bathtub plot it has no effect and queries return invalid values.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
real - Returns the cursor B horizontal position for the specified plot view; in bathtub plot, query returns invalid values.
DISplay:PLOTView1:CURSor:WAVEform:BPOSition 3.0 sets the position to 3.0 V. DISplay:PLOTView5:CURSor:WAVEform:BPOSition? might return :DISPLAY:PLOTVIEW5:CURSOR:WAVEFORM:BPOSITION 2.600517840, indicating the position is 2.5 V.
:DISplay:PLOTView<x>:GRIDlinesset / query
Sets or queries the grid (graticule) lines setting of the specified plot. It works only for plots that have vertical and horizontal units associated with the graticule, not XY or XYZ plots.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| mode | enum | HORizontal | VERTical | BOTH | Grid lines to display. |
DISplay:PLOTView1:GRIDlines Vertical DISplay:PLOTView1:GRIDlines?
Sets or queries the grid (graticule) lines setting of the specified plot. It works only for plots with vertical and horizontal units associated with the graticule, not for XY or XYZ plots.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
enum - Returns the grid lines setting for the specified plot.
DISplay:PLOTView1:GRIDlines Vertical DISplay:PLOTView1:GRIDlines?
:DISplay:PLOTView<x>:XAXIS:SCALEset / query
Sets or queries the horizontal scale setting for the specified plot view. The scale may be linear or logarithmic.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot waveform number. |
| scale | enum | LINEAR | LOG | Horizontal scale type. |
enum - Returns the current horizontal scale setting for the specified plot view.
DISPLAY:PLOTVIEW1:XAXIS:SCALE LOG creates a plot with a logarithmic horizontal scale. DISPLAY:PLOTVIEW1:XAXIS:SCALE? might return :DISPLAY:PLOTVIEW1:XAXIS:SCALE LINEAR indicating plots will have linear scales.
Queries the Cursor A horizontal bar’s vertical position where it crosses the spectrum signal in the Spectrum View.
Queries the vertical position of Cursor B in the Spectrum View. <x> is always 1 and specifies the Spectrum View number.
real - The vertical position of Cursor B in the vertical units of the cursor source.
DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? might return DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition -67.8 indicating the Cursor A vertical position is -67.8 units (such as dBm).
Sets or queries whether the Spectrum View cursors display the same or different sources. The command applies to Spectrum View <x>, where <x> is always 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAME | SPLIT | Selects whether both Spectrum View cursors have the same source or independent sources. |
DISplay:SPECView1:CURSor:CURSOR:SPLITMODE SPLIT DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
Sets or queries whether both Spectrum View cursors have the same or different sources.
enum - Returns the current Spectrum View cursor split mode.
DISplay:SPECView1:CURSor:CURSOR:SPLITMODE SPLIT DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
Sets or queries the visibility state of the cursors in the Spectrum View.
Sets or queries the Cursor A vertical bar’s horizontal position in the Spectrum View.
real (Hz) - Returns the horizontal position of Cursor A in Hz.
DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition 50E+6 DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? might return
Sets or queries the Cursor A horizontal position in the Spectrum View. The position is specified in Hz and is limited to the frequencies at the left and right edges of the Spectrum View for the cursor source.
real (Hz) - Returns the Cursor A horizontal position in the Spectrum View, in Hz.
DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? might return DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition 48.5E+6, indicating the Spectrum View Cursor A position is 48.5 MHz.
Sets or queries the Cursor B horizontal position in the Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | Hz | Horizontal position of Spectrum View Cursor B. |
| x | integer | 1 - 1 | Spectrum View number; x is always 1. |
real (Hz) - Returns the horizontal position of Spectrum View Cursor B in Hz.
DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition 22E+6 DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? might return DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition 48.5E+6, indicating the Spectrum View Cursor B position is 48.5 MHz.
Sets or queries the type of graticule shown in the Spectrum View window. The same grid is used for all spectrum traces.
enum - Returns the current Spectrum View graticule type.
DISplay:SPECView1:GRAticule TIME DISplay:SPECView1:GRAticule? might return GRID, indicating that the Spectrum View is showing a Grid graticule.
Queries the Spectrum View horizontal scaling setting. The Spectrum View number <x> is always 1.
enum - Returns the current Spectrum View horizontal display scaling setting.
DISplay:SPECView1:HORZ? might return DISplay:SPECView1:HORZ LOG, indicating that the horizontal display scaling in the Spectrum View window is set to log.
Sets or queries the graticule saturation (brightness) level in the Spectrum View window. It also changes the intensity of the vertical scale values on the graticule.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 1 | Spectrum View number; <x> is always 1. |
| level | real | 0% - 100% | Spectrum View graticule intensity level as a percent. |
real (%) - Returns the Spectrum View graticule saturation level as a percent.
DISplay:SPECView1:INTENSITy:GRATicule 75 DISplay:SPECView1:INTENSITy:GRATicule?
Queries the spectrum trace intensity level for Spectrum View 1. The returned value is the spectrum trace saturation level as a percent between 1% and 100%.
real (%) - Returns the spectrum trace intensity level as a percent; the example return value 80.0 indicates 80%.
DISplay:SPECView1:INTENSITy:WAVEform? might return 80.0, indicating the spectrum trace saturation level is at 80%.
Sets or queries the spectrum trace layout style used by the Spectrum View window.
enum - Returns the current Spectrum View window layout style.
DISplay:SPECView1:VIEWStyle OVErlay DISplay:SPECView1:VIEWStyle? might return STACKED, indicating the Spectrum View window is showing spectrum traces in stacked mode.
:DISplay:VARpersist?query
Sets or queries display persistence decay time, the approximate decay time for a freshly struck persistence sample.
real - Returns the display persistence decay time.
Sets or queries the location used to display the Waveform View cursor readouts, either in the graticule or as a badge in the Results Bar.
enum - Returns the current Waveform View cursor readout location.
DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION GRATICULE DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? might return DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION BADGE
:DISplay:WAVEform?query
Globally enables or disables the waveform display. When disabled, the waveform is still acquired and held in memory, but it is not drawn to the screen.
enum - Returns the current waveform display state.
DISplay:WAVEform? might return DISplay:WAVEform 1, indicating that the waveform display is enabled.
Returns the Waveform View graticule type.
enum - Returns the current Waveform View graticule type.
DISplay:WAVEView:GRIDTYPE? might return FIXED, indicating that the graticule will not change positions if the waveform moves horizontally.
Sets or queries the state of the specified bus in the specified Waveform View. WAVEView<x> must be WAVEView1.
enum - Returns the state of the specified bus.
DISplay:WAVEView1:BUS:B1:STATE? might return DISPLAY:WAVEVIEW1:BUS:B1:STATE 1 indicating the specified bus is on.
Returns the vertical position of the specified bus in the specified Waveform View. WAVEView<x> must be WAVEView1.
real - The vertical position of the specified bus.
DISplay:WAVEView1:BUS:B1:VERTical:POSition? might return DISPLAY:WAVEVIEW1:BUS:B1:VERTICAL:POSITION 0.0E+0 indicating the position is 0.0 divisions.
Sets or queries the display state of the specified digital channel in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Controls whether the specified digital channels are displayed. 0 disables the display; any other value turns it on. |
enum - Returns the display state of the specified digital channel in the specified Waveform View.
DISplay:WAVEView1:CH1_DALL:STATE ON DISplay:WAVEView1:CH1_DALL:STATE? might return DISPLAY:WAVEVIEW1:CH1_DALL:STATE 0 indicating specified digital channels in the specified Waveform View are off.
Sets or queries the display state of the specified digital channel in the specified Waveform View.
enum - Returns the display state of the specified digital channel; 0 indicates off and 1 indicates on.
DISplay:WAVEView1:CH1_D1:STATE OFF DISplay:WAVEView1:CH1_D1:STATE? might return DISPLAY:WAVEVIEW1:CH1_D1:STATE 1 indicating the specified digital channel is on.
Sets or queries the vertical position of the specified digital channel in the specified Waveform View. The value is in divisions.
real (divisions) - Returns the vertical position of the specified digital channel in the specified Waveform View, in divisions.
DISplay:WAVEView1:CH1_DALL:VERTical:POSition 1.0e0 sets the vertical position to 1.0 divisions. DISplay:WAVEView1:CH1_DALL:VERTical:POSition? might return DISPLAY:WAVEVIEW1:CH1_DALL:VERTICAL:POSITION 0.0E+0 indicating the vertical position is 0.0 divisions.
Turns on, off, or queries the state of the specified channel in the specified Waveform View. The Waveform View index must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Sets the channel state. |
enum - Returns the channel state as 0 or 1 in the query response.
DISplay:WAVEView1:CH1:STATE ON DISplay:WAVEView1:CH1:STATE? might return DISPLAY:WAVEVIEW1:CH1:STATE 0 indicating channel 1 is off.
Queries the vertical position of the specified channel in the specified Waveform View, in divisions. 0.0 divisions is center, 5.0 is the top of the window, and -5.0 is the bottom.
real (divisions) - Returns the channel vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the window, and -5.0 is the bottom.
DISplay:WAVEView1:CH1:VERTical:POSition? might return DISPLAY:WAVEVIEW1:CH1:VERTICAL:POSITION -3.4400 indicating the channel 1 vertical position is -3.44 divisions.
Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View.
real (V/div) - Returns the vertical scale of the specified channel.
DISplay:WAVEView1:CH1:VERTical:SCAle 2.0e2 sets the vertical scale to 200 mV per division. DISplay:WAVEView1:CH1:VERTical:SCAle? might return DISPLAY:WAVEVIEW1:CH1:VERTICAL:SCALE 200.0000E-3 indicating the scale is 200 mV per division.
Returns the selected cursor A source for the specified cursor in the specified Waveform View. The source may be an analog channel, bus, math channel, reference waveform, plot, or AUTO-selected source.
enum - Returns the current cursor A source selection.
DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:ASOURCE REF1 indicating the cursor A source is reference 1.
Sets or queries the cursor B source of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
enum - Returns the cursor B source.
Sets or queries the cursor type of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SCREEN | WAVEFORM | VBArs | HBArs | Cursor type to set. |
enum - Returns the current cursor type of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:FUNCTION VBArs DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:FUNCTION?
Sets or queries the HBARs vertical A position of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | -5.0 - 5.0 | Vertical cursor A position in the specified Waveform View; 0.0 divisions is center, 5.0 is top, and -5.0 is bottom. |
real (divisions) - Returns the vertical cursor A position of the specified cursor in the specified Waveform View.
DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition 3.0e0 DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?
Queries the vertical cursor B position of the specified cursor in the specified Waveform View.
real - The vertical cursor B position of the specified cursor in the specified Waveform View.
DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:HBARS:BPOSITION 387.9148706896567E-3 indicating the B cursor position is 387.9 mV.
Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | INDEPENDENT | TRACK | Selects the cursor tracking mode. |
enum - Returns the current cursor tracking mode of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:MODE TRACK DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:MODE? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:MODE TRACK, indicating that the two cursors move in unison.
Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Horizontal cursor A position of the specified cursor in the specified Waveform View. |
real - Returns the horizontal cursor A position of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:AXPOSITION 15.0E-3 DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:AXPOSITION?
Sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The vertical cursor A position of the specified cursor in the specified Waveform View. |
real - The vertical cursor A position of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:AYPOSITION 25.0E-3 DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:AYPOSITION? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:AYPOSITION -53.0000E-03
Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The horizontal cursor B position of the specified cursor in the specified Waveform View. |
real - Returns the horizontal cursor B position of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:BXPOSITION 15.0E-3 DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:BXPOSITION? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:BXPOSITION -64.0000E-03
Sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View. WAVEView<x> must be WAVEView1 and Cursor<x> must be CURSOR1.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The vertical cursor B position of the specified cursor in the specified Waveform View. |
real - Returns the vertical cursor B position of the specified cursor in the specified Waveform View.
DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:BYPOSITION 25.0E-3 DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SCREEN:BYPOSITION?
Queries the split mode of the specified cursor in the specified Waveform View. SAME indicates both cursors have the same source; SPLIT indicates the cursors have different sources.
enum - Returns the split mode of the specified cursor.
DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:SPLITMODE SAME indicating the cursors have the same source.
Sets or queries the visible state of the specified cursor in the specified Waveform View.
enum - Returns the cursor visible state.
Returns the horizontal cursor A position of the specified cursor in the specified Waveform View.
real - The horizontal cursor A position of the specified cursor in the specified Waveform View.
DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:VBARS:APOSITION -5.0E-6 indicating the cursor A position is -5.0 μs.
Sets or queries the cursor B horizontal position of the specified cursor in the specified Waveform View.
real - Returns the horizontal cursor B position of the specified cursor in the specified Waveform View.
Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Horizontal cursor A position of the specified cursor in the specified Waveform View. |
real - Returns the horizontal cursor A position of the specified cursor in the specified Waveform View.
DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition 1.5e-6 DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? might return DISPLAY:WAVEVIEW1:CURSOR:CURSOR1:WAVEFORM:APOSITION -1.2667480236557E-6
Sets or queries the type of interpolation filter for the display. WAVEView<x> must be WAVEView1.
Selects or queries the type of graticule displayed for the specified Waveform View. WAVEView<x> must be WAVEView1.
enum - Returns the current graticule type.
DISplay:WAVEView1:GRAticule TIME DISplay:WAVEView1:GRAticule?
Sets or queries the graticule saturation level for the specified Waveform View. The value is given as an NR2 percentage.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | % | Graticule saturation level. |
real (%) - Returns the graticule saturation level as a percentage.
DISplay:WAVEView1:INTENSITy:GRATicule 75 DISplay:WAVEView1:INTENSITy:GRATicule?
Sets or queries the waveform saturation level for the specified Waveform View. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | % | Waveform saturation level. |
real (%) - Returns the waveform saturation level as a percentage.
DISplay:WAVEView1:INTENSITy:WAVEform 75 DISplay:WAVEView1:INTENSITy:WAVEform?
Sets or queries whether the specified math is auto-scaled when the math equation changes within the specified Waveform View.
enum - Returns the auto-scale setting for the specified math.
Sets or queries the state of the specified math waveform in the specified Waveform View. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NR1 | OFF | ON | Turns the specified math waveform off or on; <NR1> = 0 disables it and any other value enables it. |
enum - Returns the state of the specified math waveform in the specified Waveform View.
DISplay:WAVEView1:MATH:MATH1:STATE OFF DISplay:WAVEView1:MATH:MATH2:STATE? might return DISPLAY:WAVEVIEW1:MATH:MATH2:STATE 1 indicating the math is displayed.
Sets or queries the vertical position in divisions of the specified math waveform in the specified Waveform View.
real - Returns the vertical position in divisions of the specified math waveform.
DISplay:WAVEView1:MATH:MATH1:VERTical:POSition 0 DISplay:WAVEView1:MATH:MATH1:VERTical:POSition?
Sets or queries the vertical scale of the specified math waveform in volts per division within the specified Waveform View. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | V/div | Vertical scale of the specified math waveform. |
real (V/div) - Returns the vertical scale of the specified math waveform.
DISplay:WAVEView1:MATH:MATH1:VERTical:SCAle 400e-3 sets the scale to 400 mV per division. DISplay:WAVEView1:MATH:MATH1:VERTical:SCAle? might return DISPLAY:WAVEVIEW1:MATH:MATH1:VERTICAL:SCALE 395.0000E-3 indicating the scale is 395 mV.
Sets or queries whether the specified trend gets auto-scaled when new data is available within the specified Waveform View.
enum - Returns the auto-scale state of the specified plot.
DISplay:WAVEView1:PLOT:PLOT1:AUTOScale 1 enables auto-scaling the specified plot in the specified Waveform View. DISplay:WAVEView1:PLOT:PLOT1:AUTOScale? might return DISPLAY:WAVEVIEW1:PLOT:PLOT1:AUTOSCALE 0 indicating that auto-scaling for plot 1 is off.
Returns the on/off state of the specified plot in the specified Waveform View. A response of 1 indicates the plot is on; 0 indicates it is off.
enum - The specified plot state.
DISplay:WAVEView1:PLOT:PLOT1:STATE? might return DISPLAY:WAVEVIEW1:PLOT:PLOT1:STATE 1 indicating the specified plot in the specified Waveform View is on.
Sets or queries the vertical position of the specified time trend in the specified Waveform View in absolute units.
real - Returns the vertical position of the specified time trend in the specified Waveform View.
Sets or queries the vertical scale of the specified plot in a Waveform View. The query returns the current scale value.
real - Returns the current vertical scale value for the specified plot.
DISplay:WAVEView1:PLOT:PLOT1:VERTical:SCAle 725.0e-3 DISplay:WAVEView1:PLOT:PLOT1:VERTical:SCAle?
Sets or queries the state of the specified reference waveform in the specified Waveform View. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Disables the specified reference when 0 or OFF is used; any other value turns it on. |
enum - Returns the state of the specified reference waveform in the specified Waveform View. 1 indicates the reference is on.
DISplay:WAVEView1:REF:REF1:STATE OFF DISplay:WAVEView1:REF:REF1:STATE? might return DISPLAY:WAVEVIEW1:REF:REF1:STATE 1 indicating the specified reference in the specified Waveform View is on.
Sets or returns the selected frame of the specified digital ref. Each reference has a unique selected frame.
| Name | Type | Values | Description |
|---|---|---|---|
| frame | integer | - | Selected frame of the specified digital ref. |
integer - Returns the selected frame of the specified digital ref.
DISplay:WAVEView1:REF1_DALL:FRAMe? might return DISPLAY:WAVEVIEW1:REF1_DALL:FRAME 1, indicating the selected frame is 1.
Sets or queries the vertical position of the specified reference in the Waveform View, in divisions.
real - Returns the vertical position in divisions.
DISplay:WAVEView1:REF:REF1:VERTical:POSition -2.5e0 DISplay:WAVEView1:REF:REF1:VERTical:POSition?
Sets or queries the vertical scale of the specified reference in volts per division within the specified Waveform View. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V/div | The vertical scale of the specified reference waveform. |
real (V/div) - Returns the vertical scale of the specified reference waveform in volts per division.
DISplay:WAVEView1:REF:REF1:VERTical:SCAle 400e-3 DISplay:WAVEView1:REF:REF1:VERTical:SCAle?
Sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions. For this command, WAVEView<x> is always WAVEView1 and RF_FREQuency<x> specifies the waveform number.
real (divisions) - Returns the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.
DISplay:WAVEView1:RF_FREQuency1:VERTical:POSition? might return DISplay:WAVEView1:RF_FREQuency1:VERTical:POSition -4.79, indicating the Channel 1 Frequency vs. Time vertical position is -4.79 divisions.
Sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View, in Hertz per division.
real (Hz) - Returns the vertical scale of the specified Frequency vs. Time trace, in Hertz per division.
DISplay:WAVEView1:RF_FREQuency2:VERTical:SCAle? might return DISplay:WAVEView1:RF_FREQuency2:VERTical:SCAle 2.0E3, indicating the vertical scale of the Channel 2 Frequency vs. Time trace is 2KHz per division.
Queries the vertical position of the specified Magnitude vs. Time trace in the specified Waveform View. The value is returned in divisions, with 0.0 at center.
real (divisions) - Vertical position in divisions of the specified Magnitude vs. Time trace.
Sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View. The scale is in volts, watts, or dB per division depending on the Magnitude Format setting.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Sets the vertical scale. |
real - Returns the vertical scale of the specified Magnitude vs. Time trace.
DISplay:WAVEView1:RF_MAGnitude3:VERTical:SCAle 5.0 DISplay:WAVEView1:RF_MAGnitude2:VERTical:SCAle?
Sets or queries the vertical position of the specified Phase vs. Time trace in Waveform View, in divisions.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | WAVEView<x> is always WAVEView1. |
| x | integer | - | RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform. |
| position | real | divisions | Sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View. |
real (divisions) - Returns the vertical position in divisions.
DISplayWAVEView1:RF_PHASe1:VERTical:POSition? might return DISplayWAVEView1:RF_PHASe1:VERTical:POSition -1.7, indicating the Channel 1 Phase vs. Time vertical position is -1.7 divisions.
Sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View, in degrees per division.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | deg/div | Sets the vertical scale, in degrees per division. |
Sets or queries how the waveforms are displayed for analysis mode. WAVEView<x> must be WAVEView1.
enum - Returns the waveform display style for the specified Waveform View.
DISplay:WAVEView1:STYle VECTORS DISplay:WAVEView1:STYle?
Sets or queries the waveform layout style used by the display. WAVEView<x> must be WAVEView1.
| Name | Type | Values | Description |
|---|---|---|---|
| style | enum | OVErlay | STAcked | Specifies whether the display view style is overlay or stacked. |
enum - Returns the waveform layout style of the specified Waveform View.
DISplay:WAVEView1:VIEWStyle OVERLAY sets the view style to overlay. DISplay:WAVEView1:VIEWStyle? might return DISPLAY:WAVEVIEW1:VIEWSTYLE STACKED indicating the view style is stacked.
Returns the horizontal position of the specified zoom box in the specified Waveform View. The value is the percent of the waveform that is to the left of screen center, when the zoom factor is 2× or greater.
real (%) - The horizontal position of the zoom box, returned as a percent of the waveform left of screen center.
DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:POSITION? might return
Sets or queries the horizontal zoom factor of the specified zoom in the specified Waveform View. WAVEView<x> must be WAVEView1 and ZOOM<x> must be ZOOM1.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1 - 2-4 | Amount of expansion in the horizontal direction in 1-2-4 increments. |
real - Returns the horizontal zoom factor setting.
DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:SCALe 5 DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:SCALe? might return DISPLAY:WAVEVIEW1:ZOOM:ZOOM1:HORIZONTAL:SCALe 10
Sets or queries the horizontal scale of the specified zoom window.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The horizontal scale of the zoom window. |
real - Returns the horizontal scale of the zoom window.
DISplay:WAVEView1:ZOOM:ZOOM1HORizontal:WINSCALe? might return
Sets or queries the zoom display state of the specified zoom in the specified Waveform View. This command is equivalent to pushing the zoom button on the front panel.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns the specified zoom on or off. |
| value | integer | 0 | Enables the specified zoom for any nonzero value and disables it for 0. |
enum - Returns the zoom display state of the specified zoom.
DISplay:WAVEView1:ZOOM:ZOOM1:STATe ON DISplay:WAVEView1:ZOOM:ZOOM1:STATe? might return DISplay:WAVEView1:ZOOM:ZOOM1:STATe 1, indicating that specified zoom is on.
Returns the vertical position of the specified zoom in the specified Waveform View. The position is freely movable within the confines of the acquired waveform.
real - The vertical position of the specified zoom in the specified Waveform View.
DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? might return DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition 23.90000, indicating that the vertical position of the specified zoom in the specified Waveform View is set to 23.9, where the vertical zoom factor is 10x, top of screen is -50 and bottom if +50, and 0 is the vertical center.
Sets or queries the vertical zoom factor of the specified zoom in the specified Waveform View. The entered value uses the nearest scale factor; setting the vertical scale to 1 indicates unity (no zoom).
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Amount of vertical expansion or compression. |
real - Returns the vertical scale of the specified zoom in the specified Waveform View.
DISplay:WAVEView1:ZOOM:ZOOM2:VERTical:SCALe? might return DISplay:WAVEView1:ZOOM:ZOOM2:VERTical:SCALe 2.0000, indicating that the vertical scale of zoom1 of waveview1 is 2×.
Returns the selected frame of the specified analog ref.
integer - The selected frame number of the specified analog ref.
DISplay:WAVEView1:REF:REF2:FRAMe? might return DISPLAY:WAVEVIEW1:REF:REF2:FRAME 1, indicating the selected frame is 1.
:DISPLAY:CLOCKset / query
Sets the display clock state. The factory default is 1.
:DISPLAY:DIGITAL:ACTIVITYset / query
Sets the digital display activity state. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables digital activity display. |
:DISPLAY:DIGITAL:HEIGHTset / query
Sets the digital display height. The factory default is MEDIUM.
| Name | Type | Values | Description |
|---|---|---|---|
| height | enum | MEDIUM | Digital display height setting. |
:DISPLAY:GRATICULEset / query
Sets the graticule display mode. The factory default is FULL.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FULL | Graticule display mode. |
:DISPLAY:INTENSITY:BACKLIGHTset / query
Sets the display backlight intensity. The factory default is HIGH.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | Backlight intensity setting. |
:DISPLAY:INTENSITY:BACKLIGHT:AUTODIM:ENABLEset / query
Sets the auto-dim enable state for the display backlight. The factory default is 1.
:DISPLAY:INTENSITY:BACKLIGHT:AUTODIM:TIMEset / query
Sets the backlight auto-dim time. The factory default is 60.
| Name | Type | Values | Description |
|---|---|---|---|
| time | integer | - | Auto-dim delay time. |
:DISPLAY:INTENSITY:GRATICULEset / query
Sets the graticule intensity. The factory default is 75.
| Name | Type | Values | Description |
|---|---|---|---|
| intensity | integer | - | Graticule intensity setting. |
:DISPLAY:INTENSITY:WAVEFORMset / query
Sets the waveform display intensity. The factory default is 35.
| Name | Type | Values | Description |
|---|---|---|---|
| intensity | integer | 0 - 100 | Waveform display intensity. |
:DISPLAY:PERSISTENCEset / query
Sets the display persistence value. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| persistence | real | - | Persistence setting value. |
:DISPLAY:STYLE:DOTSONLYset / query
Sets whether only dots are used to display waveforms.
:DISPLAY:TRIGFREQUENCYset / query
Sets the display trigger frequency option to the factory default value. The factory default for this setting is 0.
:DISPLAY:XYset / query
Sets or queries whether XY display mode is enabled. The factory default is OFF.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables XY display mode. |
:DISPLAY:XY:WITHYTset / query
Enables or disables whether the XY display includes a YT trace. The factory default is OFF.
:display:waveview1:ch2:stateset / query
Turns the CH2 waveform on.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Sets the display state of the CH2 waveform. |
:DISPLAY:WAVEVIEW1:CH2:STATEset / query
Turns the CH2 waveform on.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | - | Enables or disables the CH2 waveform display. |
:MEASUrement:MEAS<x>:WAITTimeset / query
Sets or queries the wait time.
:MEASUrement:MEAS<x>:OFILTers:LOWPass:SPECset / query
Sets or returns the low pass filter specification for a measurement.
:MEASUrement:MECH:EINDexzset / query
Sets or queries the global mechanical Index Z source.
returns
:MEASUrement:MECH:MUNitsset / query
Sets or queries the global mechanical measurement results units.
enum - Returns the global mechanical measurement results units.
:MEASUrement:MECH:PPRotationset / query
Sets or queries the global pulses per rotation of the measurement.
:MEASUrement:MEAS<x>:SJFREQuencyset / query
Sets or queries the SJ Frequency value.
:MEASUrement:MEAS<x>:VLEVelset / query
Sets or queries whether histogram center is percentage relative to unit interval or an absolute value for eye width measurement.
:MEASUrement:MEAS<x>:WIDThset / query
Sets or queries the histogram width in terms of percentage.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | % | Histogram width in percentage. |
:MEASUrement:MEAS<x>:WINDOWLENgthset / query
Sets or queries the window length for the measurement.
Returns the horizontal scale units of the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specified measurement number. |
enum - Horizontal scale units of the specified measurement.
Returns the vertical scale units of the specified measurement.
enum - Returns the vertical scale units of the specified measurement.
:MEASUrement:MEASRange:MAXset / query
Sets or queries the global range maximum value.
:MEASUrement:MEASRange:MINset / query
Sets or queries the global range minimum value.
:MEASUrement:MEASRange:STATEset / query
Sets or queries the global range state.
:MEASUrement:MECH:GRATioset / query
Sets or queries the measurement gear ratio.
:MEASUrement:MECH:PPAirsset / query
Sets or queries the measurement number of pole pairs.
:MEASUrement:MECH:SOUrce<x>set / query
Sets or queries the global mechanical source of the specified source number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Source number to select. |
:MEASUrement:MECH:STYPeset / query
Sets or queries the measurement sensor type.
:MEASUrement:MINUIset / query
Sets or queries the minimum number of unit intervals required for BUJ analysis.
:MEASUrement:POPUlation:LIMIT:STATEset / query
Sets or queries the global population limit state.
enum - Returns the global population limit state.
:MEASUrement:POPUlation:LIMIT:VALueset / query
Sets or queries the global population limit value.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Global population limit value. |
real - Returns the global population limit value.
:MEASUrement:REFLevels:ABSolute:FALLHighset / query
Sets or queries the value used as the high reference level of the falling edge.
:MEASUrement:REFLevels:ABSolute:FALLLowset / query
Sets or queries the value used as the low reference level of the falling edge.
:MEASUrement:REFLevels:ABSolute:FALLMidset / query
Sets or queries the value used as the mid reference level of the falling edge.
real - Returns the value used as the mid reference level of the falling edge.
:MEASUrement:REFLevels:ABSolute:HYSTeresisset / query
Sets or queries the value of the hysteresis of the reference level.
real - Returns the hysteresis value of the reference level.
:MEASUrement:REFLevels:ABSolute:RISEHighset / query
Sets or queries the value used as the high reference level of the rising edge.
real - Returns the value used as the high reference level of the rising edge.
:MEASUrement:REFLevels:ABSolute:RISELowset / query
Sets or queries the value used as the low reference level of the rising edge.
:MEASUrement:REFLevels:ABSolute:RISEMidset / query
Sets or queries the value used as the mid reference level of the rising edge.
:MEASUrement:REFLevels:ABSolute:TYPEset / query
Sets or queries the reference level type.
:MEASUrement:REFLevels:BASETopset / query
Sets or queries the method used to calculate the TOP and BASE, used to calculate reference levels.
enum - Returns the method used to calculate the TOP and BASE, used to calculate reference levels.
:MEASUrement:MEAS<x>:WBG:BCOuntset / query
Sets or queries the burst count for WBG measurement.
:MEASUrement:MEAS<x>:WBG:BDELayset / query
Sets or queries the burst delay for WBG measurement.
Returns the AFG test connection status.
enum - AFG test connection status.
:MEASUrement:MEAS<x>:WBG:DELayset / query
Sets or queries the delay for WBG measurement.
:MEASUrement:MEAS<x>:WBG:ESONeset / query
Enables or disables generator source one for WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ENABled | DISabled | Turns generator source one on or off for the WBG measurement. |
:MEASUrement:MEAS<x>:WBG:ESTWoset / query
Enables or disables generator source two for WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Enables or disables generator source two for WBG measurement. |
:MEASUrement:MEAS<x>:WBG:GENAddressset / query
Sets or queries the generator address for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GENSetupset / query
Connects the generator setup for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GSOurce<x>:HIGHset / query
Sets or queries the high voltage of the generator for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GSOurce<x>:LOADset / query
Sets or queries the load type of the generator for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GSOurce<x>:LOWset / query
Sets or queries the low voltage of the generator for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GSOurce<x>:PG<x>Valset / query
Sets or queries the pulse gap of the generator for WBG measurement.
real - Returns the pulse gap of the generator for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GSOurce<x>:PW<x>Valset / query
Sets or queries the pulse width of generator for WBG measurement.
:MEASUrement:MEAS<x>:WBG:GTYPeset / query
Sets or returns the generator type for WBG measurements.
:MEASUrement:MEAS<x>:WBG:NPULsset / query
Sets or returns the number of pulse of AFG for WBG measurements.
:MEASUrement:MEAS<x>:WBG:TIMerset / query
Sets or returns the trigger interval of AFG for WBG measurements.
:MEASUrement:ADDMEASset / query
Adds a measurement by name from a fixed list of measurement types.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement_type | enum | ACCOMMONMODE | ACPR | ACRMS | AMPLITUDE | AREA | BASE | BITAMPLITUDE | BITHIGH | BITLOW | BURSTWIDTH | CCJITTER | COMMONMODE | CPOWER | DATARATE | DCD | DDJ | DDRAOS | DDRAOSPERTCK | DDRAOSPERUI | DDRAUS | DDRAUSPERTCK | DDRAUSPERUI | DDRHOLDDIFF | DDRSETUPDIFF | DDRTCHABS | DDRTCHAVERAGE | DDRTCKAVERAGE | DDRTCLABS | DDRTCLAVERAGE | DDRTERRMN | DDRTERRN | DDRTJITCC | DDRTJITDUTY | DDRTJITPER | DDRTPST | DDRTRPRE | DDRTWPRE | DDRVIXAC | DDRTDQSCK | DELAY | DJ | DJDIRAC | DPMPSIJ | EYEHIGH | EYELOW | FALLSLEWRATE | FALLTIME | FREQUENCY | F2 | F4 | F8 | HEIGHT | HEIGHTBER | HIGH | HIGHTIME | HOLD | IMDAANGLE | IMDADIRECTION | IMDADQ0 | IMDAEFFICIENCY | IMDAHARMONICS | IMDAMECHPWR | IMDAPOWERQUALITY | IMDASPEED | IMDASYSEFF | IMDATORQUE | ISI | JITTERSUMMARY | J2 | J9 | LOW | LOWTIME | MAXIMUM | MEAN | MINIMUM | NDUty | NOVERSHOOT | NPERIOD | NPJ | NWIDTH | OBW | PATTERNLENGTH | PDUTY | PERIOD | PHASE | PHASENOISE | PJ | PK2Pk | POVERSHOOT | PWIDTH | QFACTOR | RISESLEWRATE | RISETIME | RJ | RJDIRAC | RMS | SETUP | SJFREQ | SKEW | SRJ | SSCFREQDEV | SSCMODRATE | SSCSLEWRATE | TIE | TIMEOUTSIDELEVEL | TIMETOMAX | TIMETOMIN | TJBER | TNTRATIO | TOP | UNITINTERVAL | VDIFFXOVR | WBGDDT | WBGDIODEDDT | WBGEOFF | WBGEON | WBGERR | WBGIPEAK | WBGIRRM | WBGQOSS | WBGQRR | WBGTDOFF | WBGTDON | WBGTF | WBGTON | WBGTOFF | WBGTR | WBGTRR | WBGTDT | WBGVPEAK | WIDTH | WIDTHBER | Measurement type to add. |
:MEASUrement?query
Query-only command that returns all measurement parameters.
string - Returns all measurement parameters as a semicolon-separated list of measurement settings.
MEASUREMENT?
:MEASUrement:ADDNewset / query
Adds the specified measurement to the measurement group.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The measurement to add, in the form "MEAS<NR1>" where NR1 6 1. |
MEASUrement:ADDNew "MEAS11" adds measurement 11.
:MEASUrement:ANNOTateset / query
Sets or queries the annotation state for measurements. OFF turns off measurement annotations; AUTO turns on visible measurement annotations.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | AUTO | Controls whether measurement annotations are shown. |
enum - Returns the measurement annotation state.
MEASUREMENT:ANNOTATE OFF MEASUREMENT:ANNOTATE?
Sets or queries the annotation state for measurements. OFF turns off measurement annotations, and AUTO turns on visible measurement annotations.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | AUTO | Annotation state for measurements. |
enum - Returns the current measurement annotation state.
MEASUREMENT:ANNOTATE OFF turns off measurement annotations. MEASUREMENT:ANNOTATE? might return MEASUREMENT:ANNOTATION:STATE OFF, indicating that no measurement annotations are active.
:MEASUrement:AUTOsetset / query
Performs a specified autoset. The available autoset actions include DPM, analysis jitter, IMDA 3 phase, and WBG-related operations.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DPMAutoset | DPMPReset | EXECute | THREEPHASEAUTOset | WBGDeskewexec | WBGPREset | WBGGSTIM | Specifies which autoset operation to perform. |
MEASUREMENT:AUTOSET EXECute performs an analysis jitter autoset. MEASUREMENT:AUTOSET THREEPHASEAUTOset performs an IMDA 3 phase autoset.
Sets or queries the value used as the high reference level of the falling edge when the source reference level method is set to absolute. The channel number is specified by x.
Sets or queries the value used as the high reference level of the falling edge when the source reference level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| high reference level | real | V | High reference level of the falling edge. |
real (V) - Returns the high reference level setting for the falling edge, in volts.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLHIGH 1.5 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLHIGH?
Sets or queries the value used as the low reference level of the falling edge when the source reference level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| level | real | V | Low reference level value for the falling edge. |
real (V) - Returns the low reference level setting for the falling edge.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLLOW 1.5 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLLOW?
Sets or queries the value used as the low reference level of the falling edge when the source reference level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| level | real | V | Low reference level value for the falling edge. |
real (V) - Returns the low reference level of the falling edge.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLLOW 1.5 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLLOW? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLLOW 1.5000
Sets or queries the value used as the mid reference level of the falling edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V | The mid reference level value. |
Sets or queries the mid reference level used to calculate the falling-edge mid reference level when the measurement ref level method is set to Absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | V | Mid reference level used to calculate the falling-edge mid reference level. |
string - Returns the command and numeric value for the falling-edge mid reference level.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLMID 0 sets the mid reference level of the falling edge to 0.0 V. MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLMID? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:FALLMID 0.0E+0 indicating that the mid reference level of the falling edge is 0.0 V.
Sets or queries the hysteresis value of the reference level when the source reference level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | - | Hysteresis value used for autoset. |
real - Returns the reference hysteresis level setting.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:HYSTERESIS 30.0000E-3 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:HYSTERESIS?
Sets or queries the hysteresis value of the reference level when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Hysteresis value used for autoset. |
real - Returns the hysteresis value of the reference level when the source ref level method is set to absolute.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:HYSTERESIS 30.0000E-3 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:HYSTERESIS?
Sets or queries the high reference level used for the rising edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| high reference level | real | V | High reference level of the rising edge when the source ref level method is set to absolute. |
real (V) - Returns the high reference level of the rising edge.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEHIGH 1.5 sets the high reference level of the rising edge to 1.5 V. MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEHIGH? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEHIGH 1.0000 indicating that the high reference level of the rising edge is 1.0 V.
Sets or queries the value used as the high reference level of the rising edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| high reference level | real | - | High reference level of the rising edge when the source ref level method is set to absolute. |
real (V) - Returns the high reference level of the rising edge when the source ref level method is set to absolute.
Sets or queries the value used as the low reference level of the rising edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | The low reference level of the rising edge when the source ref level method is set to absolute. |
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW 1.5 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW 1.0000
Sets or queries the value used as the low reference level of the rising edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number specified in the command mnemonic. |
| low reference level | real | - | Low reference level of the rising edge when the source ref level method is set to absolute. |
real - Returns the low reference level of the rising edge when the source ref level method is set to absolute.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW 1.5 MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW? MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISELOW 1.0000
Sets or queries the value used as the mid reference level of the rising edge when the source ref level method is set to absolute. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V | The mid reference level of the rising edge when the source ref level method is set to absolute. |
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEMID 0 sets the mid reference level of the rising edge to 0.0 V. MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEMID? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:RISEMID 0.0E+0 indicating that the mid reference level of the rising edge is 0.0 V.
Sets or queries the method used to calculate reference levels for the measurement. The channel number is specified by x.
:MEASUrement:CH<x>:REFLevels:ABSolute:TYPEset / query
Sets or queries the method used to calculate the reference levels for the measurement channel. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PERCent | ABSolute | Reference level calculation method. |
Queries the absolute reference-level type for the specified measurement channel.
enum - Returns whether the absolute reference levels for the specified measurement channel are the same or not the same.
MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:TYPE? might return MEASUREMENT:CH2:REFLEVELS:ABSOLUTE:TYPE SAME indicating that the reference levels for absolute measurements are the same.
:MEASUrement:CH<x>:REFLevels:BASETopset / query
Sets or queries the method used to calculate the TOP and BASE reference levels for the specified measurement channel.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MINMax | MEANhistogram | MODEhistogram | EYEhistogram | Method used to calculate TOP and BASE reference levels. |
enum - Returns the currently selected reference level calculation method.
MEASUREMENT:CH2:REFLEVELS:BASETOP MINMAX specifies that reference levels are relative to the measurement MIN MEASUREMENT:CH2:REFLEVELS:BASETOP? might return MEASUREMENT:CH2:REFLEVELS:BASETOP AUTO indicating the reference levels are chosen automatically.
Sets or queries the method used to calculate the TOP and BASE used to calculate measurement reference levels. The channel number is specified by x.
enum - Returns the reference-level calculation method for the specified measurement channel.
MEASUREMENT:CH2:REFLEVELS:BASETOP MINMAX MEASUREMENT:CH2:REFLEVELS:BASETOP?
:MEASUrement:CH<x>:REFLevels:METHodset / query
Sets or queries the method used to calculate reference levels for the measurement channel specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | PERCent | ABSolute | The reference level method to use. |
Sets or queries the method used to calculate reference levels for the measurement on the specified channel.
enum - Returns the reference level method for the specified measurement channel.
Sets or queries the percentage used to calculate the high reference level of the falling edge when the reference level method is set to percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | 0 - 100 | Percentage used to calculate the high reference level for the falling edge when Ref level method is set to Percent. |
MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLHIGH 90.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLHIGH?
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement Ref level method is set to Percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| percent | real | % | Percentage used to calculate the high reference level for the falling edge. |
real (%) - Returns the percentage setting for the high reference level of the falling edge, in percent.
MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLHIGH 90.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLHIGH?
:MEASUrement:CH<x>:REFLevels:PERCent:FALLLowset / query
Sets or queries the percentage used to calculate the low reference level of the falling edge when the measurement ref level method is set to Percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | % | The percentage used to calculate the low reference level when the measurement Ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the low reference level of the falling edge.
MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLLOW 10.0000 sets the reference levels for the falling edge to 10%. MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLLOW? might return MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLLOW 10.0000 indicating the reference levels for the falling edge is set to 10%.
Sets or queries the percentage used to calculate the low reference level of the falling edge when the source Ref level method is set to Percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| percentage | real | 1 - 100 | Percentage used to calculate the low reference level for the falling edge when the Ref level method is set to Percent. |
MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLLOW 10.0000 sets the reference levels for the falling edge to 10%.
:MEASUrement:CH<x>:REFLevels:PERCent:FALLMidset / query
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the reference level method is set to Percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
real (%) - Returns the percentage used to calculate the mid reference level of the falling edge.
MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLMiD 50.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:FALLMID?
Sets or queries the percentage used to calculate the hysteresis of the reference level when the measurement ref level method is set to percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| hysteresis | real | % | Percentage used to calculate the hysteresis of the reference level. |
real (%) - Returns the reference level hysteresis value.
MEASUREMENT:CH2:REFLEVELS:PERCENT:HYSTERESIS 5.0000 sets the reference level hysteresis to 5.0 mV. MEASUREMENT:CH2:REFLEVELS:PERCENT:HYSTERESIS? might return MEASUREMENT:CH2:REFLEVELS:PERCENT:HYSTERESIS 5.0000 indicating the reference level hysteresis is set to 5.0 mV.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| percentage | real | % | Percentage used to calculate the high reference level for the rising edge when the ref level method is set to Percent. |
MEASUREMENT:CH2:REFLEVELS:PERCENT:RISEHIGH 90.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:RISEHIGH?
:MEASUrement:CH<x>:REFLevels:PERCent:RISELowset / query
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement ref level method is set to percent. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| percent | real | % | Percentage used to calculate the low reference level of the rising edge. |
string - Query returns the command and current value of the low reference level setting.
MEASUREMENT:CH2:REFLEVELS:PERCENT:RISELOW 10.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:RISELOW? might return MEASUREMENT:CH2:REFLEVELS:PERCENT:RISELOW 10.0000
:MEASUrement:CH<x>:REFLevels:PERCent:RISEMidset / query
Sets or queries the percentage mid reference level used for a measurement's rising edge when the Ref level method is Percent. The value is given as a percentage, where 50% is equal to MID.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | % | Percentage used to calculate the mid reference level for the rising edge. |
real (%) - Returns the percentage mid reference level for the rising edge, as a value where 50% is equal to MID.
MEASUREMENT:CH2:REFLEVELS:PERCENT:RISEMiD 50.0000 MEASUREMENT:CH2:REFLEVELS:PERCENT:RISEMID? might return MEASUREMENT:CH2:REFLEVELS:PERCENT:RISEMID 50.0000
:MEASUrement:CH<x>:REFLevels:PERCent:TYPEset / query
Specifies or queries the reference level percent type for the measurement. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TENNinety | TWENtyeighty | CUSTom | Reference level percent type. |
enum - Returns the reference level percent type for the measurement.
MEASUREMENT:CH2:REFLEVELS:PERCENT:TYPE TENNINETY MEASUREMENT:CH2:REFLEVELS:PERCENT:TYPE? might return MEASUREMENT:CH2:REFLEVELS:PERCENT:TYPE TWENTYEIGHTY indicating the reference levels are set to the 20 and 80% levels.
:MEASUrement:CLOCKRecovery:ADVanced:METHodset / query
Sets or queries the global advanced clock recovery method. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | NONE | NOMinal | PATTern | Global advanced clock recovery method. |
enum - Returns the current global advanced clock recovery method.
:MEASUrement:CLOCKRecovery:CLOCKFrequencyset / query
Sets or queries the global clock frequency used when fixed constant clock recovery is used for the measurement. It affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | Hz | Global clock frequency used with Constant Clock - Fixed clock recovery method. |
real (Hz) - Returns the global clock frequency.
MEASUREMENT:CLOCKRECOVERY:CLOCKFREQUENCY 2.0E+9 MEASUREMENT:CLOCKRECOVERY:CLOCKFREQUENCY?
:MEASUrement:CLOCKRecovery:CLOCKMultiplierset / query
Sets or queries the global clock multiplier used when explicit clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| clock multiplier | real | - | Global clock multiplier. |
MEASUREMENT:CLOCKRECOVERY:CLOCKMULTIPLIER 1.000 sets the clock multiplier to 1.000.
:MEASUrement:CLOCKRecovery:CONSTCLOCKMODeset / query
Sets or queries the global constant clock mode used when constant clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | MEAN | MEDian | FIXed | Selects the constant clock mode. |
enum - Returns the current constant clock mode.
MEASUREMENT:CLOCKRECOVERY:CONSTCLOCKMODE MEAN MEASUREMENT:CLOCKRECOVERY:CONSTCLOCKMODE? might return MEASUREMENT:CLOCKRECOVERY:CONSTCLOCKMODE MEAN indicating the constant clock mode is set to MEAN.
:MEASUrement:CLOCKRecovery:DAMPingset / query
Sets or queries the global damping value used when PLL clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| damping | real | - | Global clock recovery damping value. |
real - Returns the current global damping value.
MEASUREMENT:CLOCKRECOVERY:DAMPING MEASUREMENT:CLOCKRECOVERY:DAMPING? might return MEASUREMENT:CLOCKRECOVERY:DAMPING 700.0000E-3
:MEASUrement:CLOCKRecovery:DATAPathset / query
Sets or queries the path and filename of the file containing the data pattern. The file path is supplied in quotes.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Path and filename of the file containing the data pattern. |
string - Returns the current data path and filename.
MEASUREMENT:CLOCKRECOVERY:DATAPATH "C:/E:" sets the data path to C:/E:. MEASUREMENT:CLOCKRECOVERY:DATAPATH? might return MEASUREMENT:CLOCKRECOVERY:DATAPATH "C:/E".
:MEASUrement:CLOCKRecovery:DATARateset / query
Sets or queries the global nominal data bit rate used when nominal data rate clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| rate | real | - | Global value for the nominal data rate. |
real - Returns the global nominal data bit rate used for clock recovery.
MEASUREMENT:CLOCKRECOVERY:DATARATE 2.0e+9 sets the data rate for clock recovery to 2.0 GHz. MEASUREMENT:CLOCKRECOVERY:DATARATE? might return MEASUREMENT:CLOCKRECOVERY:DATARATE 2.5000E+9 indicating the data rate is 2.5 GHz.
:MEASUrement:CLOCKRecovery:EXPLICITCLOCKMODeset / query
Sets or queries the global explicit clock mode used when explicit clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EDGE | PLL | Selects the explicit clock recovery mode. |
:MEASUrement:CLOCKRecovery:JTFBandwidthset / query
Sets or queries the global JTF bandwidth used when PLL clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Global clock recovery JTF bandwidth. |
real - Returns the global clock recovery JTF bandwidth.
MEASUREMENT:CLOCKRECOVERY:JTFBANDWIDTH 2.0e6 MEASUREMENT:CLOCKRECOVERY:JTFBANDWIDTH?
:MEASUrement:CLOCKRecovery:LOOPBandwidthset / query
Sets or queries the global loop bandwidth used when PLL clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The global loop bandwidth. |
real - Returns the global loop bandwidth.
MEASUREMENT:CLOCKRECOVERY:LOOPBANDWIDTH 2.0e6 sets the loop bandwidth to 2.0 MHz. MEASUREMENT:CLOCKRECOVERY:LOOPBANDWIDTH? might return MEASUREMENT:CLOCKRECOVERY:LOOPBANDWIDTH 1.0000E+6 indicating the loop bandwidth is 1.0 MHz.
:MEASUrement:CLOCKRecovery:MEANAUTOCalculateset / query
Sets or queries how often the clock is calculated when constant clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FIRST | EVERY | Selects whether the clock is calculated on the first acquisition or on every acquisition. |
enum - Returns the current clock-calculation setting.
MEASUREMENT:CLOCKRECOVERY:MEANAUTOCALCULATE EVERY calculates the clock on every acquisition. MEASUREMENT:CLOCKRECOVERY:MEANAUTOCALCULATE? might return MEASUREMENT:CLOCKRECOVERY:MEANAUTOCALCULATE FIRST indicating the clock is calculated on the first acquisition.
:MEASUrement:CLOCKRecovery:METHodset / query
Sets or queries the global clock recovery method for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PLL | CONSTANTCLOCK | EXPLICITCLOCK | Selects the clock recovery method. |
enum - Returns the current global clock recovery method for the measurement.
MEASUREMENT:CLOCKRECOVERY:METHOD EXPLICITCLOCK specifies using an explicit clock. MEASUREMENT:CLOCKRECOVERY:METHOD? might return MEASUREMENT:CLOCKRECOVERY:METHOD PLL indicating the method is set to PLL.
:MEASUrement:CLOCKRecovery:MODelset / query
Sets the PLL clock recovery model type. The valid model values are 1 or 2.
| Name | Type | Values | Description |
|---|---|---|---|
| TYPE<x> | integer | 1 - 2 | PLL model type to use for clock recovery. |
MEASUREMENT:CLOCKRECOVERY:MODEL TYPE2 MEASUREMENT:CLOCKRECOVERY:MODEL?
:MEASUrement:CLOCKRecovery:NOMINALOFFsetset / query
Sets or queries the global offset value used when explicit clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | real | - | Global clock offset. |
MEASUREMENT:CLOCKRECOVERY:NOMINALOFFSET 1.0 MEASUREMENT:CLOCKRECOVERY:NOMINALOFFSET?
Sets or queries the global offset type used when explicit clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | AUTO | MANUAL | Selects the global offset type. |
MEASUREMENT:CLOCKRECOVERY:NOMINALOFFSET:SELECTIONTYPE AUTO MEASUREMENT:CLOCKRECOVERY:NOMINALOFFSET:SELECTIONTYPE?
:MEASUrement:CLOCKRecovery:STAndardset / query
Sets or queries the global communications standard used when PLL clock recovery is used for the measurement. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | CUSTom | ENET100 | FW1394BS400B | FW1394BS800B | FW1394BS1600B | FBD1 | FBD2 | FBD3 | FC133 | FC266 | FC531 | FC1063 | FC2125 | FC4250 | FC8500 | ENET1000 | IBA2500 | IBA_GEN2 | OC1 | OC3 | OC12 | OC48 | PCIE_GEN1 | PCIE_GEN2 | PCIE_GEN3 | RIO125 | RIO250 | RIO3125 | SAS15_NOSSC | SAS3_NOSSC | SAS6_NOSSC | SAS12_NOSSC | SAS15_SSC | SAS3_SSC | SAS6_SSC | SAS12_SSC | SATA_GEN1 | SATA_GEN2 | SATA_GEN3 | USB3 | XAUI | XAUI_GEN2 | Selects the global communications standard for PLL clock recovery. |
enum - Returns the current global communications standard used for PLL clock recovery.
:MEASUrement:CLOCKRecovery:TDCOMPensationset / query
Sets the PLL clock recovery loop feedback time-constants so the actual transfer function matches a mathematical filter polynomial. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Turns automatic transition density compensation on or off. |
:MEASUrement:DDJMethodset / query
Sets or queries the model used to separate DDJ from TIE.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SPECtraldomain | TIMDomain | Selects the DDJ separation model. |
enum - Indicates which DDJ separation model is set.
MEASUrement:DDJMethod SPECtraldomain MEASUREMENT:DDJMethod?
:MEASUrement:DELETEALLset / query
Deletes all the active instances of measurements defined in the scope application.
:MEASUrement:DELeteset / query
Deletes the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement | string | - | The measurement to delete; must be in the form "MEAS<NR1>" where <NR1> is greater than or equal to 1. |
MEASUREMENT:DELETE "MEAS4" deletes measurement 4.
:MEASUrement:DIRacmodelset / query
Sets or queries the dirac model used to separate random from deterministic jitter for jitter measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| model | enum | PCIExpress | FIBREchannel | Selects the dirac model. |
enum - Returns the current dirac model.
MEASUREMENT:DIRACMODEL FIBRECHANNEL sets the dirac model to FIBRECHANNEL. MEASUREMENT:DIRACMODEL? might return MEASUREMENT:DIRACMODEL PCIEXPRESS indicating the dirac model is set to PCIECPRESS.
:MEASUrement:DISPLAYUnitsset / query
Sets or queries the display units used for jitter summary measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SEConds | UNITINtervals | Selects the display units for jitter summary measurements. |
enum - Returns the current display units setting.
MEASUREMENT:DISPLAYUNITS UNITINTERVALS sets the display units to unit intervals. MEASUREMENT:DISPLAYUNITS? might return MEASUREMENT:DISPLAYUNITS SECONDS indicating the display units are seconds.
:MEASUrement:EDGE<x>set / query
Sets or queries the type of edge used for the measurement.
:MEASUrement:ENABLEPjitterset / query
Sets or queries the state of period jitter analysis mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Selects whether period jitter analysis mode is active or off. |
MEASUREMENT:ENABLEPjitter ON activates period jitter analysis mode.
:MEASUrement:FILTers:BLANKingtimeset / query
Sets or queries the global filter blanking time.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Current filter blanking time. |
returns
:MEASUrement:FILTers:HIGHPass:FREQset / query
Sets or queries the global high pass filter frequency for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| freq | real | Hz | Current high pass filter frequency. |
real (Hz) - Returns the current high pass filter frequency.
MEASUREMENT:FILTERS:HIGHPASS:FREQ 20.0e6 MEASUREMENT:FILTERS:HIGHPASS:FREQ?
:MEASUrement:FILTers:HIGHPass:SPECset / query
Sets or queries the global high pass filter order for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| spec | enum | NONE | FIRST | SECOND | THIRD | Selects the high pass filter order or disables the high pass filter. |
enum - Returns the current global high pass filter order for the measurement.
MEASUREMENT:FILTERS:HIGHPASS:SPEC NONE MEASUREMENT:FILTERS:HIGHPASS:SPEC?
:MEASUrement:FILTers:LOWPass:FREQset / query
Sets or queries the global low pass filter frequency for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | - | The current low pass filter frequency. |
MEASUREMENT:FILTERS:LOWPASS:FREQ 20.0e6 sets the low pass frequency to 20 MHz. MEASUREMENT:FILTERS:LOWPASS:FREQ? might return MEASUREMENT:FILTERS:LOWPASS:FREQ 10.0000E+6 indicating the low pass frequency is 10.0 MHz.
:MEASUrement:FILTers:LOWPass:SPECset / query
Sets or queries the global low pass filter order for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONE | FIRST | SECOND | THIRD | Global low pass filter order. |
enum - Returns the current global low pass filter order for the measurement.
MEASUREMENT:FILTERS:LOWPASS:SPEC SECOND MEASUREMENT:FILTERS:LOWPASS:SPEC? might return MEASUREMENT:FILTERS:LOWPASS:SPEC NONE indicating no low pass filter.
:MEASUrement:FILTers:RAMPtimeset / query
Sets or queries the global filter ramp time for the measurement.
:MEASUrement:GATingset / query
Sets or queries the global gating type for measurements. Gating can be turned off or set to screen, cursor, logic, search, or time-based gating.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONE | SCREEN | CURSor | LOGic | SEARch | TIMe | Global measurement gating type. |
MEASUREMENT:GATING SCREEN turns on measurement gating, using the left and right edges of the screen. MEASUREMENT:GATING? might return MEASUREMENT:GATING CURSOR, indicating that measurements are limited to the portion of the waveform between the vertical bar cursors.
:MEASUrement:GATing:ACTiveset / query
Sets or queries the global gating active level used for logic gating.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Selects whether the logic gate is active high or active low. |
:MEASUrement:GATing:ENDtimeset / query
Sets or queries the end gate time for all measurements that use Global gating.
| Name | Type | Values | Description |
|---|---|---|---|
| endtime | real | -10000 - 10000 | Time gating end gate time in seconds. |
real (s) - Returns the global end gate time in seconds.
MEASUrement:GATing:ENDtime 5.31e-2 MEASUrement:GATing:ENDtime?
:MEASUrement:GATing:HYSTeresisset / query
Sets or queries the global gating hysteresis value used for logic gating.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | s | The gating hysteresis. |
real (s) - Returns the gating hysteresis value.
MEASUREMENT:GATING:HYSTERESIS 40.0e-3 MEASUREMENT:GATING:HYSTERESIS?
:MEASUrement:GATing:LOGICSourceset / query
Sets or queries the global logic source used for measurement gating. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Logic source selection. |
enum - Returns the current logic source, such as a channel, math channel, or reference waveform.
MEASUREMENT:GATING:LOGICSOURCE MATH1 MEASUREMENT:GATING:LOGICSOURCE?
:MEASUrement:GATing:MIDRefset / query
Sets or queries the global gating mid reference value used for logic gating.
| Name | Type | Values | Description |
|---|---|---|---|
| mid ref value | real | V | Mid reference value for gating. |
real (V) - Returns the current gating mid ref value.
MEASUREMENT:GATING:MIDREF 2.0 MEASUREMENT:GATING:MIDREF?
:MEASUrement:GATing:SEARCHSourceset / query
Sets or queries the global gating search source when the gating type is search.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | enum | - | Specifies the search source. |
returns
:MEASUrement:GATing:STARTtimeset / query
Sets or queries the start gate time for all measurements that use Global gating.
| Name | Type | Values | Description |
|---|---|---|---|
| start gate time | real | -10000 - 10000 | Time gating start gate time in seconds. |
real (s) - Returns the current global start gate time in seconds.
MEASUrement:GATing:STARTtime -1.5e-3 MEASUrement:GATing:STARTtime?
:MEASUrement:HIGHLEVel:CONFIGurationset / query
Sets or queries the global input and output configuration.
| Name | Type | Values | Description |
|---|---|---|---|
| configuration | enum | INPUT | OUTPUT | Selects the source settings configuration as input or output. |
enum - Returns the current source settings configuration.
MEASUREMENT:HIGHLEVEL:CONFIGURATION INPUT sets the source settings configuration as input. MEASUREMENT:HIGHLEVEL:CONFIGURATION? might return MEASUrement:HIGHLEVel:CONFIGuration INPUT, indicating the source settings configuration is input.
:MEASUrement:HIGHLEVel:EDGEQUALifierset / query
Sets or queries the global input edge qualifier source. The source can be selected from an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the source used for the global input edge qualifier. |
enum - Returns the current global input edge qualifier source.
MEASUREMENT:HIGHLEVEL:EDGEQUALIFIER CH1 MEASUREMENT:HIGHLEVEL:EDGEQUALIFIER?
:MEASUrement:HIGHLEVel:INLOWPass:FREQset / query
Sets or queries the global input low pass filter frequency.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | 20 Hz - 10e6 Hz | Global input low pass filter frequency. |
real (Hz) - Returns the global input low pass filter frequency.
MEASUREMENT:HIGHLEVEL:INLOWPASS:FREQ 1e3 MEASUREMENT:HIGHLEVEL:INLOWPASS:FREQ?
:MEASUrement:HIGHLEVel:INLOWPass:SPECset / query
Sets or queries the global input low pass filter order.
| Name | Type | Values | Description |
|---|---|---|---|
| order | enum | NONE | FIRST | SECOND | THIRD | Selects the global input low pass filter order. |
enum - Returns the current global input low pass filter order.
:MEASUrement:HIGHLEVel:L2LTOL2Nset / query
Enables or disables the Line-to-Line to Line-to-Neutral conversion.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Turns the conversion off or on. |
MEASUREMENT:HIGHLEVEL:L2LTOL2N 1 enables Line-to-Line to Line-to-Neutral Conversion. MEASUREMENT:HIGHLEVEL:L2LTOL2N? might return MEASUrement:HIGHLEVel:L2LTOL2N 0, indicating Line-to- Line to Line-to-Neutral Conversion is disabled.
:MEASUrement:HIGHLEVel:LINESelectedset / query
Sets or queries the global input select lines.
| Name | Type | Values | Description |
|---|---|---|---|
| lines | enum | ABCB | ACBC | BACA | AN | BN | CN | Global input select lines to use. |
enum - Returns the current global input select lines.
MEASUREMENT:HIGHLEVEL:LINESELECTED ABCB sets the global input select lines as ABCB. MEASUREMENT:HIGHLEVEL:LINESELECTED? might return MEASUrement:HIGHLEVel:LINESelected ABCB, indicating the global input select lines is ABCB.
:MEASUrement:HIGHLEVel:OUTEDGEQUALifierset / query
Sets or queries the global output edge qualifier source.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the output edge qualifier source as an analog channel, math channel, or reference waveform. |
enum - Returns the current global output edge qualifier source.
MEASUREMENT:HIGHLEVEL:OUTEDGEQUALIFIER CH1 MEASUREMENT:HIGHLEVEL:OUTEDGEQUALIFIER?
:MEASUrement:HIGHLEVel:OUTL2LTOL2Nset / query
Sets or queries global output Line-to-Line to Line-to-Neutral Conversion.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables the global output Line-to-Line to Line-to-Neutral Conversion. |
enum - Returns the current global output Line-to-Line to Line-to-Neutral Conversion state.
MEASUREMENT:HIGHLEVEL:OUTL2LTOL2N 1 MEASUREMENT:HIGHLEVEL:OUTL2LTOL2N?
:MEASUrement:HIGHLEVel:OUTLINESelectedset / query
Sets or queries the global output select lines.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | XYZY | XZYZ | YXZX | XN | YN | ZN | Selects which output lines are used. |
enum - Returns the current global output select lines.
:MEASUrement:HIGHLEVel:OUTLOWPass:FREQset / query
Sets or queries the global output low pass filter frequency.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | 20 Hz - 10e6 Hz | Specifies the global output low pass filter frequency. |
real (Hz) - Returns the global output low pass filter frequency.
MEASUREMENT:HIGHLEVEL:OUTLOWPASS:FREQ 1e3 MEASUREMENT:HIGHLEVEL:OUTLOWPASS:FREQ?
:MEASUrement:HIGHLEVel:OUTLOWPass:SPECset / query
Sets or queries the global output low pass filter order.
| Name | Type | Values | Description |
|---|---|---|---|
| order | enum | NONE | FIRST | SECOND | THIRD | Global output low pass filter order. |
:MEASUrement:HIGHLEVel:OUTSOURCEset / query
Sets or queries the global output source for measurement high-level results. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Global output source selection. |
enum - Returns the current global output source selection.
MEASUREMENT:HIGHLEVEL:OUTSOURCE CH1 sets the global output source as channel 1. MEASUREMENT:HIGHLEVEL:OUTSOURCE? might return MEASUrement:HIGHLEVel:OUTSOURCE CH1, indicating the global output source is channel 1.
:MEASUrement:HIGHLEVel:OUTWIRingset / query
Sets or queries the global output wiring configuration.
| Name | Type | Values | Description |
|---|---|---|---|
| wiring | enum | P1W2V1I1 | P3W3V2I2 | P3W3V3I3 | P3W3 | DCP1W2 | Global output wiring configuration. |
enum - Returns the current global output wiring configuration.
MEASUREMENT:HIGHLEVEL:OUTWIRING P3W3 sets the global output wiring configuration to P3W3. MEASUREMENT:HIGHLEVEL:OUTWIRING? might return MEASUrement:HIGHLEVel:OUTWIRing P3W3V3I3, indicating the global output wiring configuration is P3W3V3I3.
:MEASUrement:HIGHLEVel:SOURCEset / query
Sets or queries the global input source used for the high-level measurement. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the measurement input source. |
enum - Returns the current global input source.
MEASUREMENT:HIGHLEVEL:SOURCE CH1 MEASUREMENT:HIGHLEVEL:SOURCE? might return MEASUrement:HIGHLEVel:SOURCE CH1, indicating the global input source is channel 1.
Sets or queries the global input source used for the measurement. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Global input source for the measurement. |
enum - Returns the current global input source.
MEASUREMENT:HIGHLEVEL:SOURCE CH1 sets the global input source as channel 1. MEASUREMENT:HIGHLEVEL:SOURCE? might return MEASUrement:HIGHLEVel:SOURCE CH1, indicating the global input source is channel 1.
:MEASUrement:HIGHLEVel:WIRingset / query
Sets or queries the wiring configuration for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| wiring | enum | P1W2V1I1 | P1W3V2I2 | P3W3V2I2 | P3W3V3I3 | P3W3 | DCP1W2 | Selects the measurement wiring configuration. |
enum - Returns the current wiring configuration.
MEASUREMENT:HIGHLEVEL:WIRING P3W4 sets the wiring configuration to P3W3. MEASUREMENT:HIGHLEVEL:WIRING? might return MEASUrement:HIGHLEVel:WIRing P3W3V3I3, indicating the wiring configuration is P3W3V3I3.
Sets or queries the wiring configuration for the measurement.
enum - Returns the current wiring configuration.
MEASUREMENT:HIGHLEVEL:WIRING P3W4 sets the wiring configuration to P3W3. MEASUREMENT:HIGHLEVEL:WIRING? might return MEASUrement:HIGHLEVel:WIRing P3W3V3I3, indicating the wiring configuration is P3W3V3I3.
:MEASUrement:INTERpset / query
Sets or queries the interpolation mode used to locate edge crossings.
:MEASUrement:INTERp?query
Queries the interpolation mode used for measurements.
enum - Returns the current interpolation mode.
MEASUREMENT:INTERP? might return MEASUREMENT:INTERP AUTO indicating the interpolation mode is auto.
:MEASUrement:JITTermodelset / query
Sets or queries the model used to separate random from deterministic jitter for jitter measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| model | enum | SPECTRAL | SPECTRALBUJ | Selects the jitter separation model. |
Sets or queries the model used to separate random from deterministic jitter for jitter measurements.
enum - Returns the current jitter separation model.
MEASUREMENT:JITTERMODEL SPECTRAL MEASUREMENT:JITTERMODEL?
:MEASUrement:LIST?query
Returns a comma-separated list of all currently defined measurements. When no measurements are defined, the command returns NONE.
string - A list of all currently defined measurements, or NONE when no measurements are defined.
:MEASUrement:LOCKRJset / query
Sets or queries the state of RJ locking.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns RJ locking off or on. |
MEASUREMENT:LOCKRJ ON activates RJ locking.
:MEASUrement:LOCKRJ?query
Sets or queries the state of RJ locking.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns RJ locking off or on. |
MEASUREMENT:LOCKRJ ON activates RJ locking.
:MEASUrement:LOCKRJValueset / query
Sets or queries the RJ lock value. The allowed range is 1e-15 to 1, with a default value of 1e-12.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1e-15 - 1 | RJ lock value. |
real - Returns the current RJ lock value.
MEASUREMENT:LOCKRJVALUE 1 sets the lock value to the maximum value of 1. MEASUREMENT:LOCKRJVALUE? might return MEASUREMENT:LOCKRJVALUE 1.0000E-12, indicating the lock value is set to the default value of 1e-12.
Sets or queries the RJ lock value.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1e-15 - 1 | RJ lock value to use. |
real - Returns the RJ lock value.
MEASUREMENT:LOCKRJVALUE 1 sets the lock value to the maximum value of 1. MEASUREMENT:LOCKRJVALUE? might return MEASUREMENT:LOCKRJVALUE 1.0000E-12, indicating the lock value is set to the default value of 1e-12.
Sets or queries the value used as the high reference level of the falling edge when the measurement ref level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number specifying which math measurement is addressed. |
Sets or queries the high reference level of the falling edge for a math waveform when the measurement reference level method is set to Absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
| <NR3> | real | V | High reference level; zero percent level when MEASUrement:IMMed:REFLevel:METHod is set to Absolute. |
real (V) - Returns the high reference level of the falling edge for the specified math waveform.
MEASUrement:MATH1:REFLevels:ABSolute:FALLHigh 1.5 sets the reference level to 1.5 V. MEASUrement:MATH2:REFLevels:ABSolute:FALLHigh? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:FALLHIGH 1.0000 indicating the reference level is 1.0 V.
Sets or queries the value used as the low reference level of the falling edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
| value | real | - | The low reference level value. |
real - Returns the current low reference level value.
MEASUrement:MATH2:REFLevels:ABSolute:FALLLow -1.5 sets the reference level to -1.5 V. MEASUrement:MATH2:REFLevels:ABSolute:FALLLow? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:FALLLOW -1.0000 indicating the reference level is -1.0 V.
Sets or queries the value used as the low reference level of the falling edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | integer | - | Specifies the math number. |
| <NR3> | real | V | The low reference level value. |
real (V) - Returns the low reference level value for the specified math waveform.
MEASUrement:MATH2:REFLevels:ABSolute:FALLLow -1.5 MEASUrement:MATH2:REFLevels:ABSolute:FALLLow?
Sets the mid reference level used to calculate the measurement's absolute reference levels for the specified math number. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | integer | - | Specifies the math number. |
| <NR3> | real | - | The mid reference level (where 50% is equal to MID) used to calculate the mid reference level when the measurement's Ref level method is set to Absolute. |
MEASUrement:MATH2:REFLevels:ABSolute:FALLMid 0.0 sets the reference level to 0.0 V. MEASUrement:MATH2:REFLevels:ABSolute:FALLMid? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:FALLMID 0.0E+0 indicating the reference level is 0.0 V.
Sets or queries the value used as the mid reference level for a falling edge when the measurement ref level method is set to Absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math number. |
| level | real | - | Mid reference level value used to calculate the falling-edge mid reference level. |
real - Returns the mid reference level value.
MEASUrement:MATH2:REFLevels:ABSolute:FALLMid 0.0 sets the reference level to 0.0 V. MEASUrement:MATH2:REFLevels:ABSolute:FALLMid? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:FALLMID 0.0E+0 indicating the reference level is 0.0 V.
Sets or queries the hysteresis value of the reference level when the measurement ref level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | - | - | Specifies the math number. |
| hysteresis | real | - | The hysteresis value used for the autoset. |
real - Returns the hysteresis value.
MEASUrement:MATH2:REFLevels:ABSolute:HYSTeresis 20.0E-3 sets the hysteresis to 20.0 mV. MEASUrement:MATH2:REFLevels:ABSolute:HYSTeresis? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:HYSTERESIS 30.0000E-3 indicating the hysteresis value is 30.0 mV.
Sets or queries the hysteresis value of the reference level when the measurement reference level method is set to Absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number. |
| hysteresis | real | - | Hysteresis value used for the autoset. |
real - Returns the hysteresis value.
MEASUrement:MATH2:REFLevels:ABSolute:HYSTeresis 20.0E-3 sets the hysteresis to 20.0 mV. MEASUrement:MATH2:REFLevels:ABSolute:HYSTeresis? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:HYSTERESIS 30.0000E-3 indicating the hysteresis value is 30.0 mV.
Sets or queries the high reference level used for the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | integer | - | Specifies the math number. |
| <NR3> | real | - | The high reference level, and is the zero percent level when MEASUrement:IMMed:REFLevel:METHod is set to Absolute. |
real - Returns the high reference level value.
MEASUrement:MATH2:REFLevels:ABSolute:RISEHigh 1.5 sets the reference level to 1.5 V. MEASUrement:MATH2:REFLevels:ABSolute:RISEHigh? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:RISEHIGH 1.0000 indicating the reference level is 1.0 V.
Sets or queries the value used as the high reference level of the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
real - Returns the high reference level for the rising edge when the measurement reference level method is set to absolute.
Sets or queries the low reference level used for the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number specified in the MATH<x> node. |
| level | real | V | Low reference level for the rising edge. |
real (V) - Returns the low reference level used for the rising edge when queried.
MEASUrement:MATH2:REFLevels:ABSolute:RISELow -1.5 MEASUrement:MATH2:REFLevels:ABSolute:RISELow? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:RISELOW -1.0000
Sets or queries the value used as the low reference level of the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | integer | - | Specifies the math number. |
| value | real | V | The low reference level used for the rising edge when the measurement reference level method is Absolute. |
real (V) - Returns the low reference level for the rising edge when the measurement reference level method is set to absolute.
MEASUrement:MATH2:REFLevels:ABSolute:RISELow -1.5 MEASUrement:MATH2:REFLevels:ABSolute:RISELow?
Sets or queries the value used as the mid reference level of the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math number. |
| value | real | V | The mid reference level (where 50% is equal to MID) used to calculate the mid reference level when the measurement Ref level method is set to Absolute. |
MEASUrement:MATH2:REFLevels:ABSolute:RISEMid 30.0E-3 MEASUrement:MATH2:REFLevels:ABSolute:RISEMid?
Sets or queries the value used as the mid reference level of the rising edge when the measurement reference level method is set to absolute. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number. |
real (V) - Returns the mid reference level.
MEASUrement:MATH2:REFLevels:ABSolute:RISEMid 30.0E-3 MEASUrement:MATH2:REFLevels:ABSolute:RISEMid?
:MEASUrement:MATH<x>:REFLevels:ABSolute:TYPEset / query
Sets or queries the method used to calculate the TOP and BASE used to calculate reference levels for the measurement. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAME | UNIQue | Specifies whether the absolute levels are set the same or can be set independently. |
enum - Returns the current absolute reference level type.
MEASUrement:MATH2:REFLevels:ABSolute:TYPE UNIQUE MEASUrement:MATH2:REFLevels:ABSolute:TYPE?
Queries the absolute reference-level type for the specified math measurement. The math number is specified by x.
enum - Returns whether the absolute levels are set the same or can be set independently.
MEASUrement:MATH2:REFLevels:ABSolute:TYPE UNIQUE MEASUrement:MATH2:REFLevels:ABSolute:TYPE? might return MEASUREMENT:MATH2:REFLEVELS:ABSOLUTE:TYPE SAME indicating that the absolute levels are set the same.
:MEASUrement:MATH<x>:REFLevels:BASETopset / query
Sets or queries the method used to calculate the TOP and BASE used to calculate reference levels for the measurement. The math number is specified by x.
enum - Returns the selected reference level method.
MEASUrement:MATH1:REFLevels:BASETop MINMax MEASUrement:MATH1:REFLevels:BASETop?
Sets or queries the method used to calculate the TOP and BASE used to calculate reference levels for the measurement. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | - | - | Specifies the math number. |
| method | enum | AUTO | MINMax | MEANhistogram | MODEhistogram | EYEhistogram | Selects the reference level calculation method. |
MEASUrement:MATH1:REFLevels:BASETop MINMax MEASUrement:MATH1:REFLevels:BASETop?
:MEASUrement:MATH<x>:REFLevels:METHodset / query
Sets or queries the reference level method for math measurements. PERCENT calculates reference levels as a percent relative to HIGH and LOW, while ABSOLUTE sets them explicitly using the corresponding ABSolute commands.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | - | - | Specifies the math number. |
| mode | enum | PERCent | ABSolute | Selects whether reference levels are calculated as percent values or set explicitly. |
enum - Returns the current reference level method for the selected math measurement.
MEASUrement:MATH2:REFLevels:METHod ABSOLUTE MEASUrement:MATH2:REFLevels:METHod?
Sets or queries the reference level method for the specified math measurement. The method determines whether reference levels are calculated as a percent relative to HIGH and LOW or set explicitly.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math number. |
enum - Returns the current reference level method for the specified math measurement.
MEASUrement:MATH2:REFLevels:METHod ABSOLUTE MEASUrement:MATH2:REFLevels:METHod?
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | integer | - | Specifies the math number. |
| percentage | real | % | Percentage used to calculate the high reference level when the measurement Ref level method is set to Percent. |
real (%) - Returns the percentage used for the high reference level of the falling edge.
MEASUrement:MATH2:REFLevels:PERCent:FALLHigh 95 MEASUrement:MATH2:REFLevels:PERCent:FALLHigh?
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | integer | - | Specifies the math number. |
| percentage | real | % | Percentage used to calculate the high reference level for the falling edge. |
real (%) - Returns the percentage used to calculate the high reference level for the falling edge, where 100% is equal to HIGH.
MEASUrement:MATH2:REFLevels:PERCent:FALLHigh 95 MEASUrement:MATH2:REFLevels:PERCent:FALLHigh?
Sets the percentage used to calculate the falling-edge low reference level when the measurement reference level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | integer | - | Specifies the math number. |
| NR3 | real | % | Percentage used to calculate the falling-edge low reference level when the measurement Ref level method is set to Percent. |
MEASUrement:MATH2:REFLevels:PERCent:FALLLow 5 MEASUrement:MATH2:REFLevels:PERCent:FALLLow? might return
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
| NR3 | real | % | Percentage where 1% is equal to BASE and 99% is equal to TOP, used to calculate the mid reference level. |
real (%) - Returns the percentage value for the falling-edge mid reference level when the measurement ref level method is set to Percent.
MEASUrement:MATH2:REFLevels:PERCent:FALLLow 5 MEASUrement:MATH2:REFLevels:PERCent:FALLLow?
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| math<x> | integer | - | Specifies the math number. |
| nr3 | real | % | The percentage used to calculate the mid reference level when the measurement Ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to Percent.
MEASUrement:MATH2:REFLevels:PERCent:FALLMid 50 MEASUrement:MATH2:REFLevels:PERCent:FALLMid? MEASUREMENT:MATH2:REFLEVELS:PERCENT:FALLMID 50.0000
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
| NR3 | real | % | The percentage (where 50% is equal to MID) used to calculate the mid reference level when the measurement Ref level method is set to Percent. |
MEASUrement:MATH2:REFLevels:PERCent:FALLMid 50 MEASUrement:MATH2:REFLevels:PERCent:FALLMid?
Sets or queries the hysteresis percentage used to calculate the reference level when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
| <NR3> | real | % | The hysteresis value used for the autoset. |
MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis 5 MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis?
Sets or queries the percentage hysteresis used for measurement reference levels when the ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number to use. |
real (%) - Returns the hysteresis percentage set as a percentage of MAX.
MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis 2.5 sets the hysteresis to 2.5% of MAX. MEASUrement:MATH2:REFLevels:PERCent:HYSTeresis? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:HYSTERESIS 5.0000 indicating the hysteresis is set to 5% of MAX.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number. |
| percent | real | <NR3> | Percentage used to calculate the high reference level when the measurement ref level method is set to Percent. |
real (%) - Returns the current percentage setting used to calculate the high reference level of the rising edge when the measurement ref level method is set to Percent.
MEASUrement:MATH2:REFLevels:PERCent:RISEHigh 95 sets the reference level to 95% of TOP. MEASUrement:MATH2:REFLevels:PERCent:RISEHigh? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISEHIGH 90.0000 indicating the reference level is set to 90% of TOP.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number. |
| percentage | real | % | Percentage used to calculate the high reference level when the measurement ref level method is set to Percent. |
real (%) - Returns the percentage value set for the high reference level, where 100% is equal to TOP.
MEASUrement:MATH2:REFLevels:PERCent:RISEHigh 95 sets the reference level to 95% of TOP. MEASUrement:MATH2:REFLevels:PERCent:RISEHigh? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISEHIGH 90.0000 indicating the reference level is set to 90% of TOP.
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement ref level method is set to Percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math number. |
| percentage | real | % | Percentage used to calculate the mid reference level when the measurement Ref level method is set to Percent. |
real (%) - Returns the percentage setting for the low reference level of the rising edge.
MEASUrement:MATH2REFLevels:PERCent:RISELow 5 sets the reference level to 5% of TOP. MEASUrement:MATH2REFLevels:PERCent:RISELow? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISELOW 10.0000 indicating the reference level is set to 10% of TOP.
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number. |
| percentage | real | 1 - 99 | Percentage used to calculate the low reference level. |
real (%) - Returns the low reference level percentage setting.
MEASUrement:MATH2REFLevels:PERCent:RISELow 5 sets the reference level to 5% of TOP. MEASUrement:MATH2REFLevels:PERCent:RISELow? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISELOW 10.0000 indicating the reference level is set to 10% of TOP.
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math number specified by x. |
| percentage | real | % | Percentage used to calculate the mid reference level when the measurement ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the mid reference level of the rising edge.
MEASUrement:MATH2:REFLevels:PERCent:RISEMid 50 sets the reference level to 50% of TOP. MEASUrement:MATH2:REFLevels:PERCent:RISEMid? might return
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement ref level method is set to percent. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | integer | - | Specifies the math number. |
| percentage | real | % | Percentage used to calculate the mid reference level when the measurement ref level method is set to Percent. |
real (%) - Returns the percentage setting for the rising-edge mid reference level.
MEASUrement:MATH2:REFLevels:PERCent:RISEMid 50 sets the reference level to 50% of TOP. MEASUrement:MATH2:REFLevels:PERCent:RISEMid? might return MEASUREMENT:MATH2:REFLEVELS:PERCENT:RISEMID 50.0000 indicating the reference level is set to 50% of TOP.
:MEASUrement:MATH<x>:REFLevels:PERCent:TYPEset / query
Specifies or queries the reference level percent type for the measurement math channel. The math number is specified by x.
enum - Returns the reference level percent type.
MEASUrement:MATH2:REFLevels:PERCent:TYPE TWENTYEIGHTY MEASUrement:MATH2:REFLevels:PERCent:TYPE?
Specifies or queries the reference level percent type for the measurement. The math number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH<x> | - | - | Specifies the math number. |
enum - Returns the reference level percent type.
MEASUrement:MATH2:REFLevels:PERCent:TYPE TWENTYEIGHTY MEASUrement:MATH2:REFLevels:PERCent:TYPE?
:MEASUrement:MEAS<x>:ABANdwidthset / query
Sets or queries the analysis bandwidth for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 | Specifies the measurement number. |
| bandwidth | real | 1.0e3 - 8.0e9 | Sets the analysis bandwidth. |
real - Returns the analysis bandwidth.
MEASUrement:MEAS2:ABANdwidth 1E+6 MEASUrement:MEAS2:ABANdwidth?
Sets or queries the analysis bandwidth for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 16 | Measurement number. |
| bandwidth | real | 1.0e3 - 8.0e9 | Analysis bandwidth. |
real (Hz) - Returns the analysis bandwidth for the measurement.
MEASUrement:MEAS2:ABANdwidth 1E+6 MEASUrement:MEAS2:ABANdwidth?
:MEASUrement:MEAS<x>:ACHANnelsset / query
Sets or queries the number of adjacent channels for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 - 5 | Specifies the measurement number. |
| count | integer | 1 - 5 | Sets the number of adjacent channels. |
integer - Returns the number of adjacent channels for the measurement.
MEASUrement:MEAS2:ACHANnels 1 turns on 1 adjacent channel. MEASUrement:MEAS2:ACHANnels? might return MEASUREMENT:MEAS2:ACHANnels 1 indicating 1 adjacent channel is on.
Sets or queries the number of adjacent channels for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| count | integer | 1 - 5 | Sets the number of adjacent channels. |
integer - Returns the number of adjacent channels on.
MEASUrement:MEAS2:ACHANnels 1 turns on 1 adjacent channel. MEASUrement:MEAS2:ACHANnels? might return MEASUREMENT:MEAS2:ACHANnels 1 indicating 1 adjacent channel is on.
:MEASUrement:MEAS<x>:AMEThodset / query
Sets or queries the analysis method used to compute eye width or eye height. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | PARAmetric | HISTogram | Analysis method used to compute eye width or eye height. |
enum - Returns the current analysis method used to compute eye width or eye height.
Returns the analysis method setting for the specified measurement. The result indicates whether the measurement is using parametric or histogram analysis.
enum - Returns the current analysis method for MEAS<x>.
MEASUrement:MEAS1:AMEThod HISTogram selects histogram analysis method for measurement 1. MEASUrement:MEAS2:AMEThod? might return MEASUREMENT:MEAS2:AMEThod HISTogram, indicating that histogram analysis method is selected for measurement 2.
:MEASUrement:MEAS<x>:BINset / query
Sets or queries the bin count for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| count | integer | - | Bin count. |
integer - Returns the bin count for the specified measurement.
MEASUrement:MEAS1:BIN 2 sets the bin count to 2. MEASUrement:MEAS1:BIN? might return MEASUREMENT:MEAS1:BIN 1 indicating the bin count is 1.
Sets or queries the bin count for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | NR3 | The bin count. |
integer - Returns the current bin count.
MEASUrement:MEAS1:BIN 2 MEASUrement:MEAS1:BIN?
:MEASUrement:MEAS<x>:BITAbsoluteset / query
Sets or queries the bit center as an absolute value for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| bit center | real | - | Absolute bit center value. |
real - Returns the bit absolute value for the specified measurement.
MEASUrement:MEAS1:BITAbsolute 50E-12 sets the bit absolute to 50E-12 for measurement 1. MEASUrement:MEAS1:BITAbsolute? might return MEASUrement:MEAS1:BITAbsolute 50E-12, indicating the bit absolute is 50E-12 for measurement 1.
Sets or queries the bit center as an absolute value for the specified measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
real - The bit center absolute value for the specified measurement.
MEASUrement:MEAS1:BITAbsolute 50E-12 MEASUrement:MEAS1:BITAbsolute?
:MEASUrement:MEAS<x>:BITCfgmodeset / query
Sets or queries whether the measurement returns the mean or mode statistic result when the measurement type is bit amplitude/high/low. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | MEAN | MODE | Specifies whether the measurement returns results for each bit or the mode of its results. |
enum - Returns the current configuration mode for the measurement.
MEASUrement:MEAS1:BITCfgmode MODE MEASUrement:MEAS1:BITCfgmode?
Sets or queries whether the measurement returns the mean or mode statistic result when the measurement type is bit amplitude/high/low. Measurements are specified by x.
enum - Returns the current configuration mode for the measurement.
MEASUrement:MEAS1:BITCfgmode MODE specifies that the measurement returns the mode of its results. MEASUrement:MEAS1:BITCfgmode? might return MEASUREMENT:MEAS1:BITCFGMODE MEAN indicating the configuration mode is set to MEAN.
:MEASUrement:MEAS<x>:BITEndset / query
Sets or queries the bit end as a percentage of the unit interval. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bit end | real | % | The bit end value as a percentage of the unit interval. |
real (%) - Returns the bit end as a percentage of the unit interval.
MEASUrement:MEAS2:BITEnd 60 sets the bit end to 60% of the unit interval. MEASUrement:MEAS2:BITEnd? might return MEASUREMENT:MEAS2:BITEND 50.0000 indicating the bit end is 50%.
Sets or queries the bit end as a percentage of the unit interval. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| bit end | real | - | The bit end value as a percentage of the unit interval. |
real (%) - Returns the bit end as a percentage of the unit interval.
MEASUrement:MEAS2:BITEnd 60 sets the bit end to 60% of the unit interval. MEASUrement:MEAS2:BITEnd? might return MEASUREMENT:MEAS2:BITEND 50.0000 indicating the bit end is 50%.
:MEASUrement:MEAS<x>:BITPcntset / query
Sets or queries the bit center percentage for the selected measurement. The value is specified as a percentage of the unit interval.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| bit center percentage | real | % | Bit center percentage value to be measured for the bit type selected. |
real (%) - Returns the bit center percentage value.
MEASUrement:MEAS2:BITPcnt 55 sets the bit center to 55% of the unit interval. MEASUrement:MEAS2:BITPcnt? might return MEASUREMENT:MEAS2:BITPCNT 50.0000 indicating bit center is 50% of the unit interval.
Sets or queries the bit center percentage value for the selected measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | % | Bit center percentage value to be measured for the bit type selected. |
real (%) - Returns the bit center percentage value for the selected measurement.
MEASUrement:MEAS2:BITPcnt 55 MEASUrement:MEAS2:BITPcnt? might return MEASUREMENT:MEAS2:BITPCNT 50.0000
:MEASUrement:MEAS<x>:BITSTartset / query
Sets or queries the bit start as a percentage of the unit interval for the selected measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| NR3 | real | % | Bit start as a percentage of the unit interval. |
real (%) - Returns the bit start as a percentage of the unit interval.
MEASUrement:MEAS2:BITSTart 45 MEASUrement:MEAS2:BITSTart?
Sets or queries the bit start as a percentage of the unit interval for the selected measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| NR3 | real | % | The bit start percentage. |
real (%) - Returns the bit start as a percentage of the unit interval.
MEASUrement:MEAS2:BITSTart 45 MEASUrement:MEAS2:BITSTart?
:MEASUrement:MEAS<x>:BITTypeset / query
Sets or queries the bit type for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ALLBits | TRANSition | NONTRANsition | Selects whether the measurement returns results for all bits, transition bits only, or non-transition bits only. |
enum - Returns the current bit type setting.
Sets or queries the base measurement type for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
enum - Returns the base measurement type.
MEASUrement:MEAS2:BMTYPe PERIOD MEASUrement:MEAS2:BMTYPe?
:MEASUrement:MEAS<x>:BMTYPeset / query
Sets or queries the base measurement type for measurement x. Measurement numbers are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| mode | enum | TIE | PERIOD | NUInterval | Sets the base measurement type. |
enum - Returns the base measurement type.
MEASUrement:MEAS2:BMTYPe PERIOD MEASUrement:MEAS2:BMTYPe?
Sets or queries the base measurement type for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| mode | enum | TIE | PERIOD | NUInterval | Selects the base measurement type. |
enum - Returns the base measurement type.
MEASUrement:MEAS2:BMTYPe PERIOD MEASUrement:MEAS2:BMTYPe?
:MEASUrement:MEAS<x>:BURSTEDGTYPeset / query
Sets or queries the burst edge type for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| edge | enum | RISE | FALL | Specifies whether the burst uses a rising or falling edge. |
enum - Returns the burst edge type for the measurement.
MEASUrement:MEAS2:BURSTEDGTYPe FALL MEASUrement:MEAS2:BURSTEDGTYPe? might return MEASUREMENT:MEAS2:BURSTEDGTYPE RISE indicating a burst with a rising edge.
Sets or queries the burst edge type for the measurement. Measurements are specified by x.
enum - Returns the burst edge type for the specified measurement.
MEASUrement:MEAS2:BURSTEDGTYPe FALL specifies a burst with a falling edge. MEASUrement:MEAS2:BURSTEDGTYPe? might return MEASUREMENT:MEAS2:BURSTEDGTYPE RISE indicating a burst with a rising edge.
:MEASUrement:MEAS<x>:BVOLTageset / query
Sets or queries the bias voltage for the specified WBG measurement. Requires a WBG-DPT License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Bias voltage value for the WBG measurement. |
real - Returns the current bias voltage value for the specified measurement.
MEASUrement:MEAS2:BVOLTage 5.9000E+3 MEASUrement:MEAS2:BVOLTage?
Sets or queries the bias voltage for the specified WBG measurement number. Requires a WBG-DPT License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | x - x | Specifies the measurement number. |
| value | real | - | Bias voltage value for the WBG measurement. |
MEASUrement:MEAS2:BVOLTage 5.9000E+3 MEASUrement:MEAS2:BVOLTage?
Returns the maximum cycle-cycle statistic value for the specified measurement for all acquisitions. Measurements are specified by x.
real - The maximum cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2:CCRESUlts:ALLAcqs:MAXimum? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:MAXIMUM 9.91E+37.
Returns the mean cycle-cycle statistic value for the specified measurement for all acquisitions.
real - The mean cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2CCRESUlts:ALLAcqs:MEAN? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:MEAN 9.91E+37.
Returns the minimum cycle-cycle statistic value for the specified measurement for all acquisitions. Measurements are specified by x.
real - The minimum cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2CCRESUlts:ALLAcqs:MINimum? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:MINimum 9.91E+37.
Returns the peak-to-peak cycle-cycle statistic value for the specified measurement for all acquisitions. Measurements are specified by x.
real - The peak-to-peak cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2CCRESUlts:ALLAcqs:PK2PK? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:PK2PK 9.91E+37.
Returns the population of all cycle-cycle statistics for the specified measurement accumulated over all acquisitions since statistics were last reset.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
integer - The population of all cycle-cycle statistics for the specified measurement accumulated over all acquisitions since statistics were last reset.
MEASUrement:MEAS2:CCRESUlts:ALLAcqs:POPUlation? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:POPULATION 0 indicating no statistics for the measurement.
Returns the standard deviation cycle-cycle statistic for the specified measurement accumulated over all acquisitions since statistics were last reset. Measurements are specified by x.
real - The standard deviation cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2CCRESUlts:ALLAcqs:STDDev? might return MEASUREMENT:MEAS2:CCRESULTS:ALLACQS:STDDev 9.91E+37.
Returns the maximum cycle-cycle value for the specified measurement for the current acquisition. Measurements are specified by x.
real - The maximum cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2:CCRESUlts:CURRentacq:MAXimum? might return MEASUREMENT:MEAS1:CCRESULTS:CURRENTACQ:MAXIMUM 9.91E+37.
Returns the mean cycle-cycle value for the specified measurement for the current acquisition. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
real - The mean cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2:CCRESUlts:CURRentacq:MEAN? might return MEASUREMENT:MEAS1:CCRESULTS:CURRENTACQ:MEAN 9.91E+37.
Returns the minimum cycle-cycle value for the specified measurement for the current acquisition. Measurements are specified by x.
real - The minimum cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS2:CCRESUlts:CURRentacq:MINimum? might return MEASUREMENT:MEAS1:CCRESULTS:CURRENTACQ:MINimum 9.91E+37.
This query-only command returns the peak-to-peak cycle-cycle statistic for the specified measurement for the current acquisition. Measurements are specified by x.
real - The peak-to-peak cycle-cycle statistic value for the specified measurement for all acquisitions.
Returns the population of the cycle-cycle statistics for the specified measurement for the current acquisition. Measurements are specified by x.
integer - The population of the cycle-cycle statistics for the specified measurement for the current acquisition.
MEASUrement:MEAS1:CCRESUlts:CURRentacq:POPUlation? might return MEASUREMENT:MEAS1:CCRESULTS:CURRENTACQ:POPULATION 0
Returns the standard deviation cycle-cycle statistic value for the specified measurement for the current acquisition. Measurements are specified by x.
real - The standard deviation cycle-cycle statistic value for the specified measurement for all acquisitions.
MEASUrement:MEAS1:CCRESUlts:CURRentacq:STDDev? might return
:MEASUrement:MEAS<x>:CF<x>Valset / query
Sets or returns the filter count for the PSIJ measurement.
Queries the center frequency for the specified measurement center-frequency entry. The response returns the current center frequency value.
real - Returns the center frequency as an NR3 numeric value.
MEASUrement:MEAS1:CF1Val 2.5000E+9 MEASUrement:MEAS1:CF1Val? might return :MEASUrement:MEAS1:CF1Val 2.5000E+9 indicating the center frequency is 2.5 GHz.
Sets or queries the advanced clock recovery method used for the measurement. Measurements are specified by x.
enum - Returns the current advanced clock recovery method.
MEASUrement:MEAS1:CLOCKRecovery:ADVanced:METHod PATTERN sets the advanced CDR method to use a Known Data Pattern. MEASUrement:MEAS1:CLOCKRecovery:ADVanced:METHod? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:ADVANCED:METHOD NONE indicating no advanced CRD method.
Sets or queries the advanced clock recovery method used for the measurement. Measurements are specified by x.
enum - Returns the current advanced clock recovery method.
MEASUrement:MEAS1:CLOCKRecovery:ADVanced:METHod PATTERN sets the advanced CDR method to use a Known Data Pattern. MEASUrement:MEAS1:CLOCKRecovery:ADVanced:METHod? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:ADVANCED:METHOD NONE indicating no advanced CRD method.
Sets the clock frequency used for explicit clock recovery for measurement x, or queries the current frequency. MEAS<x> specifies the measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| clock frequency | real | Hz | Clock frequency value to set. |
MEASUrement:MEAS1:CLOCKRecovery:CLOCKFrequency 2.0E+9 sets the frequency to 2.0 GHz. MEASUrement:MEAS1:CLOCKRecovery:CLOCKFrequency? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:CLOCKFREQUENCY 2.5000E+9 indicating the frequency is 2.5 GHz.
Queries the clock frequency used for explicit clock recovery on measurement x. The measurement number is specified by x.
real (Hz) - Returns the clock frequency for the specified measurement.
MEASUrement:MEAS1:CLOCKRecovery:CLOCKFrequency 2.0E+9 MEASUrement:MEAS1:CLOCKRecovery:CLOCKFrequency? MEASUREMENT:MEAS1:CLOCKRECOVERY:CLOCKFREQUENCY 2.5000E+9
Sets or queries the clock multiplier used when explicit clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| clock multiplier | real | - | Clock multiplier. |
real - Returns the clock multiplier value.
MEASUrement:MEAS1:CLOCKRecovery:CLOCKMultiplier 1.5 sets the clock multiplier to 1.5. MEASUrement:MEAS1:CLOCKRecovery:CLOCKMultiplier? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:CLOCKMULTIPLIER 1.0000 indicating the clock multiplier is 1.0.
Sets or queries the clock multiplier used when explicit clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| clock multiplier | real | - | The clock multiplier. |
real - Returns the clock multiplier. The example shows a response such as 1.0000.
MEASUrement:MEAS1:CLOCKRecovery:CLOCKMultiplier 1.5 MEASUrement:MEAS1:CLOCKRecovery:CLOCKMultiplier?
Sets or queries the constant clock mode used when constant clock recovery is used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | MEAN | MEDian | FIXed | Selects the constant clock mode. |
:MEASUrement:MEAS<x>:CLOCKRecovery:DAMPingset / query
Sets or queries the damping value used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| damping value | real | - | Clock recovery damping value. |
real - The damping value used when PLL clock recovery is used for the measurement.
MEASUrement:MEAS1:CLOCKRecovery:DAMPing 700.0E-3 MEASUrement:MEAS1:CLOCKRecovery:DAMPing?
Sets or queries the damping value used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| damping value | real | - | Clock recovery damping value. |
real - Returns the damping value.
MEASUrement:MEAS1:CLOCKRecovery:DAMPing 700.0E-3 sets the damping value to 0.70. MEASUrement:MEAS1:CLOCKRecovery:DAMPing? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:DAMPING 700.0000E-3 indicating the damping value is 0.70.
:MEASUrement:MEAS<x>:CLOCKRecovery:DATAPathset / query
Sets or queries the file containing the data pattern used when known data pattern clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| path | string | - | File containing the data pattern to be used for known data pattern clock recovery. |
MEASUrement:MEAS1:CLOCKRecovery:DATAPath "TEST125.txt" specifies the file containing the data pattern is TEST125.txt".
Sets or queries the file containing the data pattern used when known data pattern clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| dataPath | string | - | File containing the data pattern to be used for known data pattern clock recovery. |
MEASUrement:MEAS1:CLOCKRecovery:DATAPath "TEST125.txt" specifies the file containing the data pattern is TEST125.txt.
:MEASUrement:MEAS<x>:CLOCKRecovery:DATARateset / query
Sets or queries the nominal data bit rate used when nominal data rate clock recovery is selected for a measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Nominal data rate. |
real - Returns the nominal data rate.
MEASUrement:MEAS1:CLOCKRecovery:DATARate 2.0000E+9 MEASUrement:MEAS1:CLOCKRecovery:DATARate?
Sets or queries the nominal data bit rate used when nominal data rate clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| rate | real | Hz | Nominal data rate. |
real (Hz) - Returns the nominal data rate.
MEASUrement:MEAS1:CLOCKRecovery:DATARate 2.0000E+9 MEASUrement:MEAS1:CLOCKRecovery:DATARate? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:DATARATE 2.5000E+9
Sets or queries the explicit clock mode used when explicit clock recovery is used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | EDGE | PLL | Specifies the explicit clock mode. |
enum - Returns the explicit clock mode.
MEASUrement:MEAS1:CLOCKRecovery:EXPLICITCLOCKMODe EDGE MEASUrement:MEAS1:CLOCKRecovery:EXPLICITCLOCKMODe?
Sets or queries the explicit clock mode used when explicit clock recovery is used for the measurement. The measurement number is specified by x.
enum - Returns the explicit clock mode.
MEASUrement:MEAS1:CLOCKRecovery:EXPLICITCLOCKMODe EDGE MEASUrement:MEAS1:CLOCKRecovery:EXPLICITCLOCKMODe?
:MEASUrement:MEAS<x>:CLOCKRecovery:GLOBalset / query
Sets or queries the clock recovery settings global flag for measurement x. Global clock recovery settings can be applied to all measurements or changed independently for each measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | ON | 0 | 1 | Selects whether clock recovery settings are changed independently per measurement or globally for all measurements. |
enum - Returns the global clock recovery settings flag for measurement x.
MEASUrement:MEAS1:CLOCKRecovery:GLOBal 1 MEASUrement:MEAS1:CLOCKRecovery:GLOBal? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:GLOBAL 0
Sets or queries the clock recovery settings global flag for measurement x. The setting applies globally to all measurements or independently per measurement.
enum - Returns the clock recovery settings global flag for measurement x.
MEASUrement:MEAS1:CLOCKRecovery:GLOBal 1 MEASUrement:MEAS1:CLOCKRecovery:GLOBal?
Sets or queries the JTF bandwidth used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| JTFBandwidth | real | - | The clock recovery JTF bandwidth. |
real - Returns the clock recovery JTF bandwidth.
MEASUrement:MEAS1:CLOCKRecovery:JTFBandwidth 1.10E+6 sets the bandwidth to 1.1 MHz. MEASUrement:MEAS1:CLOCKRecovery:JTFBandwidth? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:JTFBANDWIDTH 1.0000E+6 indicating the bandwidth is 1.0 MHz.
Sets or queries the JTF bandwidth used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| bandwidth | real | - | Clock recovery JTF bandwidth. |
real - Returns the JTF bandwidth used when PLL clock recovery is used for the measurement.
MEASUrement:MEAS1:CLOCKRecovery:JTFBandwidth 1.10E+6 sets the bandwidth to 1.1 MHz. MEASUrement:MEAS1:CLOCKRecovery:JTFBandwidth? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:JTFBANDWIDTH 1.0000E+6 indicating the bandwidth is 1.0 MHz.
Sets or queries the clock recovery loop bandwidth for the selected measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| bandwidth | real | - | The clock recovery loop bandwidth. |
real - Returns the clock recovery loop bandwidth for the selected measurement.
MEASUrement:MEAS1:CLOCKRecovery:LOOPBandwidth 1.10E+6 sets the bandwidth to 1.1 Mhz. MEASUrement:MEAS1:CLOCKRecovery:LOOPBandwidth? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:LOOPBANDWIDTH 1.0000E+6 indicating the bandwidth is 1.0 MHz.
Sets or queries the clock recovery loop bandwidth for measurement x. The measurement number is specified by MEAS<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| bandwidth | real | - | Clock recovery loop bandwidth. |
real - Returns the clock recovery loop bandwidth.
MEASUrement:MEAS1:CLOCKRecovery:LOOPBandwidth 1.10E+6 MEASUrement:MEAS1:CLOCKRecovery:LOOPBandwidth? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:LOOPBANDWIDTH 1.0000E+6
Sets or queries how often the clock is calculated when constant clock recovery is used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FIRST | EVERY | Selects whether the clock is calculated on the first acquisition or on every acquisition. |
enum - Indicates how often the clock is calculated when constant clock recovery is used.
MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate EVERY causes the clock to be calculated on every acquisition. MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:MEANAUTOCALCULATE FIRST indicating the clock is calculated on the first acquisition.
:MEASUrement:MEAS<x>:CLOCKRecovery:METHodset / query
Sets or queries the clock recovery method for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | PLL | CONSTANTCLOCK | EXPLICITCLOCK | Clock recovery method to use for the measurement. |
Sets or queries the clock recovery method for the measurement. Measurements are specified by x.
Sets or queries how often the clock is calculated when constant clock recovery is used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | FIRST | EVERY | Selects whether the clock is calculated on the first acquisition or on every acquisition. |
enum - Returns the current clock calculation mode.
MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate EVERY causes the clock to be calculated on every acquisition. MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:MEANAUTOCALCULATE FIRST indicating the clock is calculated on the first acquisition.
:MEASUrement:MEAS<x>:CLOCKRecovery:MODelset / query
Sets or queries the PLL clock recovery model used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| type | enum | TYPE1 | TYPE2 | Clock recovery model type. |
enum - Returns the clock recovery model type.
MEASUrement:MEAS1:CLOCKRecovery:MODel TYPE1 MEASUrement:MEAS1:CLOCKRecovery:MODel?
Sets or queries the PLL clock recovery model used when PLL clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| TYPE<x> | enum | TYPE1 | TYPE2 | Sets the clock recovery model type. |
enum - Returns the clock recovery model type currently in use. The example shows a return of TYPE1 when the model is type 1.
MEASUrement:MEAS1:CLOCKRecovery:MODel TYPE1 MEASUrement:MEAS1:CLOCKRecovery:MODel?
Sets or queries the offset value used when explicit clock recovery is used for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Clock offset. |
Sets or queries the offset type used when explicit clock recovery is used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| selectiontype | enum | AUTO | MANUAL | Selects whether the offset is automatically calculated or manually set. |
MEASUrement:MEAS1:CLOCKRecovery:NOMINALOFFset:SELECTIONtype AUTO MEASUrement:MEAS1:CLOCKRecovery:NOMINALOFFset:SELECTIONtype?
Sets or queries the offset type used when explicit clock recovery is used for the measurement. The measurement number is specified by x.
enum - Returns the current offset selection type.
Returns or sets the nominal offset used for explicit clock recovery in a measurement. The measurement number is specified by x.
real (s) - Returns the nominal offset for the specified measurement.
MEASUrement:MEAS1:CLOCKRecovery:NOMINALOFFset? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:NOMINALOFFSET 0.0E+0 indicating the offset is 0.0 ns.
:MEASUrement:MEAS<x>:CLOCKRecovery:STAndardset / query
Sets or queries the communications standard used for PLL clock recovery in the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | CUSTom | ENET100 | FW1394BS400B | FW1394BS800B | FW1394BS1600B | FBD1 | FBD2 | FBD3 | FC133 | FC266 | FC531 | FC1063 | FC2125 | FC4250 | FC8500 | ENET1000 | IBA2500 | IBA_GEN2 | OC1 | OC3 | OC12 | OC48 | PCIE_GEN1 | PCIE_GEN2 | PCIE_GEN3 | RIO125 | RIO250 | RIO3125 | SAS15_NOSSC | SAS3_NOSSC | SAS6_NOSSC | SAS12_NOSSC | SAS15_SSC | SAS3_SSC | SAS6_SSC | SAS12_SSC | SATA_GEN1 | SATA_GEN2 | SATA_GEN3 | USB3 | XAUI | XAUI_GEN2 | Communications standard used for clock recovery. |
MEASUrement:MEAS1:CLOCKRecovery:STAndard CUSTom MEASUrement:MEAS1:CLOCKRecovery:STAndard?
Sets or queries the standard used for clock recovery measurement on the specified measurement x. The query returns the current standard.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
enum - Returns the current clock recovery standard.
MEASUrement:MEAS1:CLOCKRecovery:STAndard PCIE_GEN2 sets the standard to PCIE_GEN2. MEASUrement:MEAS1:CLOCKRecovery:STAndard? might return MEASUREMENT:MEAS1:CLOCKRECOVERY:STANDARD PCIE_GEN1 indicating the standard is PCIE_GEN1.
Sets the PLL clock recovery loop feedback time-constants so the transfer function matches a mathematical filter polynomial. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | 0 specifies automatic transition density compensation is off; 1 specifies it is on. |
MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation ON specifies turning on automatic transition density compensation for PLL. MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation? might return MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation 0, indicating automatic transition density compensation is off for PLL.
Sets the PLL clock recovery loop feedback time-constants so the transfer function matches a mathematical filter polynomial. This affects measurements whose :MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Turns automatic transition density compensation off or on. |
enum - Returns the automatic transition density compensation state.
MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation ON specifies turning on automatic transition density compensation for PLL. MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation? might return MEASUrement:MEAS1:CLOCKRecovery:TDCOMPensation 0, indicating automatic transition density compensation is off for PLL.
Sets or queries whether a filter is used for the measurement when the measurement type is AC common mode. Measurements are specified by x.
enum - Returns whether the filter is on or off for the measurement.
Sets or queries whether a filter is used for the measurement when the measurement type is AC common mode. Measurements are specified by x.
enum - Returns whether the filter is on or off.
:MEASUrement:MEAS<x>:COMMONMode:SOURCEsset / query
Sets or queries the number of sources for the measurement when the measurement type is AC common mode. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | SINGLE | DOUBLE | Selects a single source or double sources. |
enum - Returns the current number of sources for the measurement.
MEASUrement:MEAS1:COMMONMode:SOURCEs SINGLE specifies a single source. MEASUrement:MEAS1:COMMONMode:SOURCEs? might return MEASUREMENT:MEAS1:COMMONMODE:SOURCES DOUBLE
Sets or queries the number of sources for the measurement when the measurement type is AC common mode. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | SINGLE | DOUBLE | Selects a single source or double sources. |
enum - Returns the current number of sources setting for the measurement.
MEASUrement:MEAS1:COMMONMode:SOURCEs SINGLE specifies a single source. MEASUrement:MEAS1:COMMONMode:SOURCEs? might return MEASUREMENT:MEAS1:COMMONMODE:SOURCES DOUBLE
:MEASUrement:MEAS<x>:COVerset / query
Sets or queries the Calculate Over setting for the Power Quality measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FFREQuency | AFREquencies | Selects whether Calculate Power Quality measurement is set for one frequency or for all frequencies. |
enum - Returns the current Calculate Over setting for the measurement.
MEASUrement:MEAS1:COVer AFREQuencies sets Calculate Power Quality measurement for all frequencies. MEASUrement:MEAS1:COVer? might return MEASUrement:MEAS1:COVer AFREQuencies, indicating the Calculate Power Quality measurement is set for all frequencies.
Sets or queries the Calculate Over setting for the Power Quality measurement. Measurements are specified by x.
enum - Returns the current Calculate Over setting for the measurement.
MEASUrement:MEAS1:COVer AFREQuencies MEASUrement:MEAS1:COVer?
:MEASUrement:MEAS<x>:CPWIDThset / query
Sets or queries the channel power width for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1.0e3 - 8.0e9 | Channel power width. |
real (Hz) - Returns the current channel power width for Measurement x.
MEASUrement:MEAS2:CPWIDTh 1E+6 MEASUrement:MEAS2:CPWIDTh?
Sets or queries the channel power width for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel power width | real | 1.0e3 - 8.0e9 | Channel power width for the measurement. |
real - Returns the channel power width setting for the selected measurement.
MEASUrement:MEAS2:CPWIDTh 1E+6 MEASUrement:MEAS2:CPWIDTh?
:MEASUrement:MEAS<x>:CSPACingset / query
Sets or queries the channel spacing for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| spacing | real | 1.0e3 - 8.0e9 | Channel spacing value. |
real (Hz) - Returns the channel spacing for the specified measurement.
MEASUrement:MEAS2:CSPACing 5.0e6 MEASUrement:MEAS2:CSPACing?
Sets or queries the channel spacing for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1.0e3 - 8.0e9 | The channel spacing. |
real (Hz) - Returns the channel spacing for Measurement x.
MEASUrement:MEAS2:CSPACing 5.0e6 MEASUrement:MEAS2:CSPACing?
:MEASUrement:MEAS<x>:CUSTOMLIMITSFileset / query
Sets or queries the custom limits file path for the custom harmonics standard. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Custom limits file path. |
Returns the current limits file location for the specified measurement. Measurements are specified by x.
string - Returns the location of the limits file for the specified measurement.
MEASUrement:MEAS1:CUSTOMLIMITSFile? might return MEASUrement:MEAS1:CUSTOMLIMITSFile <C:\MyDir\Limits.csv>, indicating the location of the Limits.csv file.
:MEASUrement:MEAS<x>:CYCLemodeset / query
Sets or queries the cycle mode for the specified measurement. Measurements are specified by x.
enum - Returns the current cycle mode for the measurement.
MEASUrement:MEAS1:CYCLemode CYCLE MEASUrement:MEAS1:CYCLemode?
Sets or queries the cycle mode for the selected measurement. Measurements are specified by x.
enum - Returns the current cycle mode for the measurement.
MEASUrement:MEAS1:CYCLemode CYCLE MEASUrement:MEAS1:CYCLemode? might return MEASUREMENT:MEAS1:CYCLEMODE RECORD indicating the measurement is taken over the whole record.
:MEASUrement:MEAS<x>:DBDownset / query
Sets or queries the dB down value for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | -80 - -1 | dB down value for the measurement. |
Sets or queries the dB down value for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| dB down value | real | -80 - -1 | Sets the dB down value. |
:MEASUrement:MEAS<x>:DELay:EDGE<x>set / query
Sets or queries the 'to edge' type when EDGE<x> is EDGE1 and the 'from edge' type when EDGE<x> is EDG2, for delay measurements. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| edge | enum | FALL | RISe | BOTH | SAMEas | OPPositeas | Selects the edge type used for the delay measurement. |
enum - Returns the currently selected edge type for the specified delay measurement.
MEASUREMENT:MEAS3:DELAY:EDGE2 RISE specifies that the rising edge of the waveform be used for measurement 3. MEASUREMENT:MEAS1:DELAY:EDGE2? might return MEASUREMENT:MEAS1:DELAY:EDGE2 FALL, indicating that the falling edge of the waveform is being used for measurement 1.
Sets or queries the edge type used for delay measurements, selecting the 'to edge' for EDGE1 and the 'from edge' for EDGE2. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FALL | RISe | BOTH | SAMEas | OPPositeas | Selects the edge type used for the delay measurement. |
enum - Returns the current edge type used for the selected delay measurement edge.
MEASUREMENT:MEAS3:DELAY:EDGE2 RISE MEASUREMENT:MEAS1:DELAY:EDGE2? might return MEASUREMENT:MEAS1:DELAY:EDGE2 FALL, indicating that the falling edge of the waveform is being used for measurement 1.
:MEASUrement:MEAS<x>:DISPlaystat:ENABleset / query
Turns display of statistics in measurement badges on or off for the specified measurement. Basic statistics are computed regardless of this setting.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Specifies the measurement number. |
| state | enum | OFF | ON | <NR1> | Turns statistics display off or on. |
Turns the display of statistics in the measurement badge on or off for measurement x.
enum - Returns the current display-statistics enable setting for measurement x.
MEASUrement:MEAS<x>:DISPlaystat:ENABle 0 turns off the display of statistics in the measurement badge. MEASUrement:MEAS<x>:DISPlaystat:ENABle? might return MEASUREMENT:MEAS1:DISPLAYSTAT:ENABLE 1
:MEASUrement:MEAS<x>:DMEThodset / query
Sets or returns the deskew method for WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Measurement number. |
| method | enum | AUTO | MANual | Deskew method set for WBG measurement. |
enum - Returns the current deskew method for WBG measurement.
MEASUrement:MEAS1:DMEThod MANual sets the deskew method for WBG measurement 1. MEASUrement:MEAS1:DMEThod? might return :MEASUrement:MEAS1:DMEThod MANual indicating the manual deskew method is set for WBG measurement 1.
Sets or returns the deskew method for WBG measurement.
enum - Returns the deskew method for the WBG measurement.
MEASUrement:MEAS1:DMEThod MANual sets the deskew method for WBG measurement 1. MEASUrement:MEAS1:DMEThod? might return :MEASUrement:MEAS1:DMEThod MANual indicating the manual deskew method is set for WBG measurement 1.
:MEASUrement:MEAS<x>:DVDSset / query
Enables or disables the display state of the derived Vds waveform for RDS(on) measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | OFF disables the derived Vds waveform display; ON enables it. |
MEASUrement:MEAS1:DVDS ON enables derived Vds waveform for RDS(on) measurement.
Enables or disables the display state of the derived Vds waveform for RDS(on) measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Turns derived Vds waveform display off or on for the selected measurement. |
MEASUrement:MEAS1:DVDS ON enables derived Vds waveform for RDS(on) measurement.
:MEASUrement:MEAS<x>:EDGE<x>set / query
Sets or queries the type of the specified edge, rise or fall, for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| edge | enum | RISE | FALL | BOTH | Specifies whether the edge is rising, falling, or either rising or falling. |
enum - Returns the specified edge type for the measurement.
MEASUREMENT:MEAS2:EDGE1 RISE sets edge 1 of measurement 2 as the rising edge. MEASUREMENT:MEAS2:EDGE1? might return MEASUREMENT:MEAS2:EDGE1 RISE indicating that edge 1 of measurement 2 is the rising edge.
Sets or queries the type of the specified edge for the measurement, where x identifies the measurement number. The edge can be rising, falling, or either.
enum - Returns the edge type for the specified measurement edge.
MEASUREMENT:MEAS2:EDGE1? might return MEASUREMENT:MEAS2:EDGE1 RISE indicating that edge 1 of measurement 2 is the rising edge.
:MEASUrement:MEAS<x>:EDGEIncreset / query
Sets or queries the edge increment value for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| edge increment value | real | - | The measurement's edge increment value. |
real - Returns the measurement edge increment value.
MEASUREMENT:MEAS2:EDGEINCRE? might return MEASUREMENT:MEAS2:EDGEINCRE 1.0000 indicating the edge increment value is set to 1.0000.
Sets or queries the edge increment value for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| edge increment value | real | - | The measurement's edge increment value. |
real - Returns the measurement's edge increment value.
MEASUREMENT:MEAS2:EDGEINCRE? might return MEASUREMENT:MEAS2:EDGEINCRE 1.0000 indicating the edge increment value is set to 1.0000.
:MEASUrement:MEAS<x>:EDGEQUALONEset / query
Sets or queries the measurement edge qualifier one source for Efficiency measurements. The source is specified as a string value such as Vac.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the edge qualifier source at input configuration. |
string - Returns the edge qualifier source for the selected measurement at input configuration.
MEASUrement:MEAS1:EDGEQUALONE Vac MEASUrement:MEAS1:EDGEQUALONE?
Sets or queries the measurement edge qualifier one source for Efficiency measurement at input configuration.
string - Returns the edge qualifier source at input configuration, such as Vac.
MEASUrement:MEAS1:EDGEQUALONE Vac sets the edge qualifier source for measurement 1 to Vac at input configuration. MEASUrement:MEAS1:EDGEQUALONE? might return Vac, indicating that the edge qualifier source for measurement 1 is Vac at input configuration.
:MEASUrement:MEAS<x>:EDGEQUALTWOset / query
Sets the measurement output edge qualifier two source for Efficiency measurement. The command takes a string source name.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the edge qualifier source at output configuration. |
:MEASUrement:MEAS<x>:EDGEQUALifierset / query
Sets or queries the edge qualifier source for the specified measurement. The source can be a channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Edge qualifier source for the measurement. |
enum - Returns the current edge qualifier source, or UNDEFINED if no edge qualifier source is set for the measurement.
MEASUrement:MEAS1:EDGEQUALifier CH4 MEASUrement:MEAS3:EDGEQUALifier?
Queries the edge qualifier source for a measurement. The source can be a channel, math waveform, or reference waveform, or UNDEFINED if none is set.
enum - Returns the edge qualifier source for the specified measurement, or UNDEFINED if no edge qualifier source is set.
MEASUrement:MEAS1:EDGEQUALifier CH4 MEASUrement:MEAS3:EDGEQUALifier?
Sets or queries the edge qualifier source at output configuration for the specified measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
string - Returns the edge qualifier source for the specified measurement at output configuration.
MEASUrement:MEAS1:EDGEQUALTWO Vxz sets the edge qualifier source for measurement 1 to Vxz at output configuration. MEASUrement:MEAS1:EDGEQUALTWO? might return Vxz, indicating that the edge qualifier source for measurement 1 is Vxz at output configuration.
:MEASUrement:MEAS<x>:EDGES:FROMLevelset / query
Sets or queries the 'from level' edge for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | enum | MID | LOW | HIGH | The edge level to use for the measurement. |
enum - Returns the current 'from level' edge setting for the measurement.
MEASUrement:MEAS1:EDGES:FROMLevel HIGH MEASUrement:MEAS1:EDGES:FROMLevel?
Sets or queries the 'from level' edge for the measurement. Measurements are specified by x.
enum - Returns the from level edge for the specified measurement.
MEASUrement:MEAS1:EDGES:FROMLevel HIGH set the from level to the high level MEASUrement:MEAS1:EDGES:FROMLevel? might return MEASUREMENT:MEAS1:EDGES:FROMLEVEL LOW indicating the from level is the low level.
:MEASUrement:MEAS<x>:EDGES:LEVelset / query
Sets or queries the level type for the 'time outside level' measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| level | enum | HIGH | LOW | BOTH | Selects the level type for the measurement. |
MEASUrement:MEAS1:EDGES:LEVel HIGH MEASUrement:MEAS1:EDGES:LEVel?
Sets or queries the level type for the time outside level measurement. Measurements are specified by x.
enum - Returns the current level type for the measurement.
:MEASUrement:MEAS<x>:EDGES:LOWERFREQuencyset / query
Sets or queries the lower frequency for the measurement when the measurement type is phase noise. Lower frequencies are ignored.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| lower frequency | real | - | The lower frequency of the edge. |
real - Returns the lower frequency setting.
MEASUrement:MEAS1:EDGES:LOWERFREQuency 1.0e3 sets the lower frequency to 1 kHz. MEASUrement:MEAS1:EDGES:LOWERFREQuency? might return MEASUREMENT:MEAS1:EDGES:LOWERFREQUENCY 0.0E+0 indicating the lower frequency is set to 0.0 Hertz.
Sets or queries the lower frequency for the measurement when the measurement type is phase noise. Lower frequencies are ignored.
real (Hz) - Returns the lower frequency of the edge.
:MEASUrement:MEAS<x>:EDGES:Nset / query
Sets or queries the number of accumulation cycles for the measurement when the measurement type is nperiod. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | real | - | Maximum number of edges used by the measurement. |
real - Returns the current number of edges used by the measurement.
measurement:meas1:edges:n 2 sets the number of edges to 2. measurement:meas1:edges:n? might return MEASUREMENT:MEAS1:EDGES:N 6.0000.
Sets or queries the number of accumulation cycles for the measurement when the measurement type is nperiod. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| count | real | - | Maximum number of edges used by the measurement. |
real - Returns the maximum number of edges used by the measurement.
measurement:meas1:edges:n 2 measurement:meas1:edges:n?
:MEASUrement:MEAS<x>:EDGES:SLEWRATEMethodset / query
Sets or queries the slew rate method for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| method | enum | NOMinal | DDR | Selects the slew rate method. |
enum - Returns the current slew rate method for the measurement.
MEASUrement:MEAS1:EDGES:SLEWRATEMethod NOMINAL MEASUrement:MEAS1:EDGES:SLEWRATEMethod?
Sets or queries the slew rate method for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOMinal | DDR | Selects the slew rate method. |
enum - Returns the current slew rate method setting.
MEASUrement:MEAS1:EDGES:SLEWRATEMethod NOMINAL specifies the nominal slew rate method. MEASUrement:MEAS1:EDGES:SLEWRATEMethod? might return MEASUREMENT:MEAS1:EDGES:SLEWRATEMETHOD NOMINAL indicating the slew rate method is set to NOMINAL.
:MEASUrement:MEAS<x>:EDGES:TOLevelset / query
Sets or queries the 'to level' edge for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | enum | HIGH | MID | LOW | Selects the to level edge for the measurement. |
enum - Returns the current to level edge setting.
MEASUrement:MEAS1:EDGES:TOLevel HIGH MEASUrement:MEAS1:EDGES:TOLevel?
Sets or queries the 'to level' edge for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
enum - Returns the current to level edge setting.
MEASUrement:MEAS1:EDGES:TOLevel HIGH MEASUrement:MEAS1:EDGES:TOLevel?
:MEASUrement:MEAS<x>:EDGES:UPPERFREQuencyset / query
Sets or queries the upper frequency for an edge measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | MHz | The upper frequency of the edge. |
string - Returns the upper frequency setting for the selected measurement.
MEASUrement:MEAS1:EDGES:UPPERFREQuency 1.5 sets the upper frequency to 1.5 MHz. MEASUrement:MEAS1:EDGES:UPPERFREQuency? might return MEASUREMENT:MEAS1:EDGES:UPPERFREQUENCY 1.0000E+6 indicating the upper frequency is 1.0 MHz.
Returns the upper frequency setting for the selected edge measurement.
real - The upper frequency of the edge measurement.
MEASUrement:MEAS1:EDGES:UPPERFREQuency? might return MEASUREMENT:MEAS1:EDGES:UPPERFREQUENCY 1.0000E+6 indicating the upper frequency is 1.0 MHz.
:MEASUrement:MEAS<x>:EEQUalset / query
Turns edge qualifier settings on or off as input waveform to the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns the edge qualifier settings on or off. |
MEASUrement:MEAS1:EEQual ON MEASUrement:MEAS1:EEQual? might return MEASUrement:MEAS1:EEQual OFF, indicating the edge qualifier settings is off.
Turns the edge qualifier setting on or off as input waveform to the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns the edge qualifier settings on or off. |
enum - Returns the edge qualifier state.
MEASUrement:MEAS1:EEQual ON MEASUrement:MEAS1:EEQual? might return MEASUrement:MEAS1:EEQual OFF, indicating the edge qualifier settings is off.
:MEASUrement:MEAS<x>:EINDuctanceset / query
Sets or returns the effective inductance for WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
Sets or returns the effective inductance value for the selected WBG measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Effective inductance value for the WBG measurement. |
MEASUrement:MEAS2:EINDuctance 1.0000 MEASUrement:MEAS2:EINDuctance? might return MEASUREMENT:MEAS2:EINDuctance 1.0000
Returns the number of measurement failures, if applicable, for the selected measurement. The measurement number is specified by x.
integer - Returns the number of measurement failures for the selected measure.
:MEASUrement:MEAS<x>:FCOuntset / query
Sets or returns the filter count for PSIJ measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| count | integer | - | Specifies the number of filters applied for PSIJ measurement. |
MEASUrement:MEAS1:FCOunt 10 sets the number of filters to 10. MEASUrement:MEAS1:FCOunt? might return :MEASUrement:MEAS1:FCOunt 10, indicating the filter count is 10.
Sets or returns the filter count for PSIJ measurement. Requires the DPM option.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Measurement number specified by x. |
| count | real | - | Number of filters applied for the PSIJ measurement. |
integer - Returns the filter count for the selected measurement.
MEASUrement:MEAS1:FCOunt 10 sets the number of filters to 10. MEASUrement:MEAS1:FCOunt? might return :MEASUrement:MEAS1:FCOunt 10, indicating the filter count is 10.
:MEASUrement:MEAS<x>:FILTERRANGEFROMset / query
Sets or queries the harmonics filter range from order for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| value | integer | - | Specifies the filter range from value. |
integer - Returns the filter range from value for the specified measurement.
MEASUrement:MEAS1:FILTERRANGEFROM 4 sets filter range from value for measurement 1 to 4. MEASUrement:MEAS1:FILTERRANGEFROM? might return MEASUrement:MEAS1:FILTERRANGEFROM 3, indicating the filter range from value is 3.
Sets or queries the harmonics filter range-from order for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| value | integer | - | Filter range from value. |
integer - Returns the filter range from value for the specified measurement.
MEASUrement:MEAS1:FILTERRANGEFROM 4 MEASUrement:MEAS1:FILTERRANGEFROM?
:MEASUrement:MEAS<x>:FILTERRANGETOset / query
Sets or queries the harmonics filter to order for measurement x. Measurement numbers are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| value | integer | NR3 | Filter range to value. |
integer - Returns the filter range to value for the specified measurement.
MEASUrement:MEAS1:FILTERRANGETO 50 sets filter range to value for measurement 1 to 50.
Sets or queries the harmonics filter to order for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | integer | <NR3> | Specifies the filter range to value. |
MEASUrement:MEAS1:FILTERRANGETO 50 sets filter range to value for measurement 1 to 50.
:MEASUrement:MEAS<x>:FILTers:BLANKingtimeset / query
Sets or queries the filter blanking time for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Current filter blanking time. |
real - Returns the current filter blanking time.
MEASUrement:MEAS1:FILTers:BLANKingtime 3.5 MEASUrement:MEAS1:FILTers:BLANKingtime?
Sets or queries the filter blanking time for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Current filter blanking time. |
real - Returns the current filter blanking time.
MEASUrement:MEAS1:FILTers:BLANKingtime 3.5 MEASUrement:MEAS1:FILTers:BLANKingtime?
:MEASUrement:MEAS<x>:FILTers:GLOBalset / query
Sets or queries the global flag for filter settings for the specified measurement. OFF/0 changes filter settings independently for each measurement; ON/1 applies global filter settings to all measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Global filter-setting mode. |
enum - Returns the global filter-setting state for the measurement.
MEASUrement:MEAS<x>:FILTers:GLOBal OFF MEASUrement:MEAS<x>:FILTers:GLOBal?
Sets or queries the global flag for measurement filter settings. When enabled, filter settings apply globally to all measurements; when disabled, they are changed independently for each measurement.
enum - Returns the current global filter setting for the specified measurement.
:MEASUrement:MEAS<x>:FILTers:HIGHPass:FREQset / query
Sets or queries the high pass filter frequency for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| frequency | real | - | Current high pass filter frequency. |
real - Returns the current high pass filter frequency.
MEASUrement:MEAS1:FILTers:HIGHPass:FREQ 15.0E+6 MEASUrement:MEAS1:FILTers:HIGHPass:FREQ? might return MEASUREMENT:MEAS1:FILTERS:HIGHPASS:FREQ 10.0000E+6
Sets or queries the high pass filter frequency for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
real - Returns the current high pass filter frequency.
MEASUrement:MEAS1:FILTers:HIGHPass:FREQ 15.0E+6 sets the high pass frequency to 15.0 MHz. MEASUrement:MEAS1:FILTers:HIGHPass:FREQ? might return MEASUREMENT:MEAS1:FILTERS:HIGHPASS:FREQ 10.0000E+6 indicating the high pass frequency is set to 10.0 MHz.
:MEASUrement:MEAS<x>:FILTers:HIGHPass:SPECset / query
Sets or queries the high pass filter order for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| order | enum | NONE | FIRST | SECOND | THIRD | Selects the high pass filter order. |
enum - Returns the current high pass filter order.
MEASUrement:MEAS1:FILTers:HIGHPass:SPEC FIRST specifies a first-order filter. MEASUrement:MEAS1:FILTers:HIGHPass:SPEC? might return MEASUREMENT:MEAS1:FILTERS:HIGHPASS:SPEC NONE indicating no high pass filter is used.
Sets or queries the high pass filter order for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| order | enum | NONE | FIRST | SECOND | THIRD | Selects the high pass filter order. |
enum - Returns the current high pass filter order.
MEASUrement:MEAS1:FILTers:HIGHPass:SPEC FIRST specifies a first-order filter. MEASUrement:MEAS1:FILTers:HIGHPass:SPEC? might return MEASUREMENT:MEAS1:FILTERS:HIGHPASS:SPEC NONE indicating no high pass filter is used.
:MEASUrement:MEAS<x>:FILTers:LOWPass:FREQset / query
Sets or queries the low pass filter frequency for the specified measurement. The argument range is 20 Hz to 10e6 Hz.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| frequency | real | 20 - 10e6 | Current low pass filter frequency. |
real (Hz) - Returns the low pass filter frequency.
MEASUrement:MEAS1:FILTers:LOWPass:FREQ 5.0E+6 sets the low pass frequency to 5.0 MHz. MEASUrement:MEAS1:FILTers:LOWPass:FREQ? might return MEASUREMENT:MEAS1:FILTERS:LOWPASS:FREQ 10.0000E+6 indicating the low pass frequency is 10.0 MHz.
Sets or queries the low pass filter frequency for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| frequency | real | 20 Hz - 10e6 Hz | Current low pass filter frequency. |
real (Hz) - Returns the current low pass filter frequency.
MEASUrement:MEAS1:FILTers:LOWPass:FREQ 5.0E+6 MEASUrement:MEAS1:FILTers:LOWPass:FREQ? might return MEASUREMENT:MEAS1:FILTERS:LOWPASS:FREQ 10.0000E+6
:MEASUrement:MEAS<x>:FILTers:LOWPass:SPECset / query
Sets or queries the low pass filter order for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONE | FIRST | SECOND | THIRD | Selects the low pass filter order: none, first, second, or third order. |
enum - Returns the current low pass filter order.
MEASUrement:MEAS1:FILTers:LOWPass:SPEC FIRST specifies a first-order filter. MEASUrement:MEAS1:FILTers:LOWPass:SPEC? might return MEASUREMENT:MEAS1:FILTERS:LOWPASS:SPEC NONE indicating no low pass filter is used.
Sets or queries the low pass filter order for the measurement. Measurements are specified by x.
:MEASUrement:MEAS<x>:FILTers:RAMPtimeset / query
Sets the current filter ramp time for the selected measurement. The query returns the current filter ramp time.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | 1 - 6 | Specifies the measurement number. |
| ramp time | real | - | Sets the filter ramp time. |
real - Returns the current filter ramp time.
MEASUrement:MEAS1:FILTers:RAMPtime 1.5 sets the ramp time to 1.5. MEASUrement:MEAS1:FILTers:RAMPtime? might return MEASUREMENT:MEAS1:FILTERS:RAMPTIME 2.0000
Returns the current filter ramp time for the specified measurement filter. The example query response shows the ramp time as a numeric value.
real - Returns the current filter ramp time.
MEASUrement:MEAS1:FILTers:RAMPtime? might return MEASUREMENT:MEAS1:FILTERS:RAMPTIME 2.0000
:MEASUrement:MEAS<x>:FORDerset / query
Sets or returns the differential filter order for WBG measurement. Requires a WBG-DPT License.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Specifies the differential filter order of the WBG measurement. |
real - Returns the differential filter order for the specified measurement.
MEASUrement:MEAS2:FORDer 1.0000 specifies the differential filter order as 1 for measurement 2. MEASUrement:MEAS2:FORDer? might return MEASUREMENT:MEAS2:FORDer 1.0000 indicating the differential filter order is 1 for measurement 2.
Sets or returns the differential filter order for WBG measurement. Requires a WBG-DPT License.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Specifies the differential filter order of the WBG measurement. |
real - Returns the differential filter order for the specified measurement.
MEASUrement:MEAS2:FORDer 1.0000 MEASUrement:MEAS2:FORDer? might return MEASUREMENT:MEAS2:FORDer 1.0000
:MEASUrement:MEAS<x>:FPARAmeterset / query
Sets or queries the roll off factor for the RRC filter in the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | 0.001 - 1.0 | Sets the roll off factor. |
real - Returns the roll off factor for the measurement.
MEASUrement:MEAS1:FPARAmeter 0.22 sets the roll off factor to 0.22.
Sets or queries the roll off factor for the RRC filter in the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Measurement number. |
| factor | real | 0.001 - 1.0 | Roll off factor for the RRC filter. |
real - Returns the roll off factor for the RRC filter in the measurement.
MEASUrement:MEAS1:FPARAmeter 0.22 sets the roll off factor to 0.22.
:MEASUrement:MEAS<x>:FREQset / query
Sets or queries the switching frequency for Switching Ripple measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| freq | real | 50 Hz - 1 GHz | Switching frequency for the measurement. |
real (Hz) - Returns the switching frequency for the selected measurement.
MEASUrement:MEAS1:FREQ 50k MEASUrement:MEAS1:FREQ?
Sets or queries the switching frequency for Switching Ripple measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| frequency | real | 50 Hz - 1 GHz | Switching frequency. |
real (Hz) - Returns the switching frequency of the selected measurement.
MEASUrement:MEAS1:FREQ 50k MEASUrement:MEAS1:FREQ? might return MEASUrement:MEAS1:FREQ 100k, indicating the switching frequency is 100 kHz.
:MEASUrement:MEAS<x>:FROMedgeset / query
Sets or queries the from edge type for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RISe | FALL | BOTH | Selects the edge type used for the measurement. |
enum - Returns the from edge type for the specified measurement.
MEASUrement:MEAS1:FROMedge RISE specifies the rising edge of the waveform. MEASUrement:MEAS1:FROMedge? might return MEASUREMENT:MEAS1:FROMEDGE BOTH indicating both the rising and falling edges of the waveform.
Sets or queries the from-edge type for the measurement specified by x.
enum - Returns the current from-edge type for the measurement.
MEASUrement:MEAS1:FROMedge RISE specifies the rising edge of the waveform. MEASUrement:MEAS1:FROMedge? might return MEASUREMENT:MEAS1:FROMEDGE BOTH indicating both the rising and falling edges of the waveform.
:MEASUrement:MEAS<x>:FROMEDGESEARCHDIRectset / query
Sets or queries the search direction used from the edge for the specified measurement. The query returns the current direction setting.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Measurement number. |
| direction | enum | FORWard | BACKWard | Search direction from the edge. |
enum - The current search direction from the edge.
MEASUrement:MEAS1:FROMEDGESEARCHDIRect BACKWard MEASUrement:MEAS1:FROMEDGESEARCHDIRect? might return MEASUREMENT:MEAS1:FROMEDGESEARCHDIRECT FORWARD indicating a forward search from the edge.
Sets or queries the direct search direction from the edge for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FORWard | BACKWard | Specifies whether the search is forward or backward from the edge. |
enum - Returns the current direct search direction from the edge for measurement x.
MEASUrement:MEAS1:FROMEDGESEARCHDIRect BACKWard MEASUrement:MEAS1:FROMEDGESEARCHDIRect? might return MEASUREMENT:MEAS1:FROMEDGESEARCHDIRECT FORWARD indicating a forward search from the edge.
:MEASUrement:MEAS<x>:FROMSymbol:LOGIC2SOUrceset / query
Sets or queries the DDR digital measurement logic 1 source From symbol. Requires option 6-DBDDR3 and a 6 Series MSO instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | H | L | X | Sets the logic source 1 From Symbol to H (High), L (Low), or X (Don't care). |
enum - Returns the current setting of the DDR digital measurement logic 1 source From symbol.
MEASUrement:MEAS1:FROMSymbol:LOGIC2SOUrce H MEASUrement:MEAS1:FROMSymbol:LOGIC2SOUrce?
Sets or queries the DDR digital measurement logic 2 source From symbol. Requires option 6-DBDDR3 and a 6 Series MSO instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | H | L | X | Sets the logic source 2 From Symbol to H (High), L (Low), or X (Don’t care). |
enum - Returns the current From Symbol logic 2 source setting.
MEASUrement:MEAS1:FROMSymbol:LOGIC3SOUrce H MEASUrement:MEAS1:FROMSymbol:LOGIC3SOUrce?
:MEASUrement:MEAS<x>:FROMSymbol:MEASUREATset / query
Sets or queries the FromSymbol MeasureAT value for measurement x. Requires option 6-DBDDR3 and a 6 Series MSO instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | Start | Stop | ClockEdge | Selects the FromSymbol MeasureAT setting. |
enum - Returns the current FromSymbol MeasureAT setting.
MEASUrement:MEAS1:FROMSymbol:MEASUREAT Start MEASUrement:MEAS1:FROMSymbol:MEASUREAT?
:MEASUrement:MEAS<x>:FTYPeset / query
Sets or returns whether the RRC filter is enabled for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | True | False | Enables or disables the RRC filter. |
enum - Returns whether the RRC filter is enabled for the specified measurement.
MEASUrement:MEAS2:FTYPe True MEASUrement:MEAS2:FTYPe?
:MEASUrement:MEAS<x>:FUNDCURRentset / query
Sets or queries the fundamental current value for IEC-Class C type harmonics standard. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| current | real | - | Fundamental current for class C harmonics standard. |
real - The fundamental current value for the selected measurement.
MEASUrement:MEAS1:FUNDCURRent 16.0000 MEASUrement:MEAS1:FUNDCURRent?
:MEASUrement:MEAS<x>:GATingset / query
Sets or queries the gating type for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONE | SCREEN | CURSor | LOGic | SEARch | TIMe | Gating type for the measurement. |
enum - Returns the current gating type for the measurement.
MEASUrement:MEAS1:GATing CURSOR limits measurements to the portion of the waveform between the vertical bar cursor.
:MEASUrement:MEAS<x>:GATing:ACTiveset / query
Sets or queries the gating active level when the gating type is logic. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | LOW | Logic gating active level. |
enum - Returns the gating active level when queried.
MEASUrement:MEAS1:GATing:ACTive LOW MEASUrement:MEAS1:GATing:ACTive?
:MEASUrement:MEAS<x>:GATing:ENDtimeset / query
Sets or queries the end gate time for the measurement when using Local gating. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| time | real | -10000 - 10000 | Time gating end gate time in seconds. |
real (s) - Returns the local end gate time for the specified measurement.
MEASUrement:MEAS4:GATing:ENDtime 5.31e-2 MEASUrement:MEAS6:GATing:ENDtime?
:MEASUrement:MEAS<x>:GATing:GLOBalset / query
Sets or queries whether gate settings are global or independent for each measurement. Measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | OFF | ON | 0 | 1 | Controls whether gate settings are independent per measurement or applied globally to all measurements. |
enum - Returns the current global gating setting.
MEASUrement:MEAS1:GATing:GLOBal OFF MEASUrement:MEAS1:GATing:GLOBal?
:MEASUrement:MEAS<x>:GATing:HYSTeresisset / query
Sets or queries the gating hysteresis value when the gating type is logic. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| hysteresis | real | - | Gating hysteresis value. |
real - Returns the gating hysteresis value.
MEASUrement:MEAS1:GATing:HYSTeresis 25.0E-3 MEASUrement:MEAS1:GATing:HYSTeresis?
:MEASUrement:MEAS<x>:GATing:LOGICSourceset / query
Sets the gating logic source for a specified measurement. The source can be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Gating logic source. |
MEASUrement:MEAS1:GATing:LOGICSource CH3 MEASUrement:MEAS1:GATing:LOGICSource? might return MEASUREMENT:MEAS1:GATING:LOGICSOURCE CH2
:MEASUrement:MEAS<x>:GATing:MIDRefset / query
Sets or queries the gating mid ref value when the gating type is logic. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| midref | real | - | Mid ref value for gating. |
real - Returns the gating mid ref value.
MEASUrement:MEAS1:GATing:MIDRef 1.0E+0 MEASUrement:MEAS1:GATing:MIDRef? might return MEASUREMENT:MEAS1:GATING:MIDREF 0.0E+0 indicating the midref value is set to 0.0.
:MEASUrement:MEAS<x>:GATing:SEARCHSourceset / query
Sets or queries the gating search source when the gating type is search. The measurement number is specified by x.
string - Returns the current gating search source.
:MEASUrement:MEAS<x>:GATing:STARTtimeset / query
Sets or queries the start gate time for the measurement when using Local gating.
| Name | Type | Values | Description |
|---|---|---|---|
| start gate time | real | -10000 - 10000 | The time gating start gate time in seconds. |
MEASUrement:MEAS1:GATing:STARTtime -1.5e-3 sets the local start gate time for Meas 1 to -1.5 ms. MEASUrement:MEAS1:GATing:STARTtime? might return 3.0e-9, indicating that the local start gate time for Meas 1 is 3 ns.
:MEASUrement:MEAS<x>:GLOBalrefset / query
Sets or queries the reference levels global flag for the specified measurement. OFF/0 allows reference levels to be set separately for each measurement, and ON/1 applies the same reference levels to all measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Global reference-level flag state. |
:MEASUrement:MEAS<x>:HARMONICSCLassset / query
Sets or queries the class type for the harmonics measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement | integer | - | Measurement number specified by x. |
| class | enum | CLASSA | CLASSB | CLASSC | CLASSD | Class type to set for the harmonics measurement. |
enum - Returns the class type for the harmonics measurement.
MEASUrement:MEAS1:HARMONICSCLass CLASSC MEASUrement:MEAS1:HARMONICSCLass?
:MEASUrement:MEAS<x>:HARMONICSSOURceset / query
Sets or queries the harmonics source for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CURRENT | VOLTAGE | Harmonics source to use. |
enum - Returns the current harmonics source setting.
MEASUrement:MEAS1:HARMONICSSOURce CURRENT sets the harmonics source for measurement 1 as current. MEASUrement:MEAS1:HARMONICSSOURce? might return MEASUrement:MEAS1:HARMONICSSOURce VOLTAGE, indicating the harmonics source as voltage.
:MEASUrement:MEAS<x>:HARMONICSStdset / query
Sets or queries the harmonics standard for measurement x. The measurement is specified by x, and the standard may be NONE, IEC, IEEE519, CUSTOM, or REVIEEE5192022.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| standard | enum | NONE | IEC | IEEE519 | CUSTOM | REVIEEE5192022 | Selects the harmonics test standard. |
enum - Returns the current harmonics standard for measurement x.
MEASUrement:MEAS1:HARMONICSStd IEC MEASUrement:MEAS1:HARMONICSStd?
:MEASUrement:MEAS<x>:HARMONICSUNitsset / query
Sets or queries the harmonics units for measurement x. The units can be logarithmic or linear.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LOGARITHM | LINEAR | Harmonics units selection. |
enum - Returns the current harmonics units setting.
MEASUrement:MEAS1:HARMONICSUNits LINEAR MEASUrement:MEAS1:HARMONICSUNits?
:MEASUrement:MEAS<x>:HIGHLEVel:CONFIGurationset / query
Sets or queries the local input or output source settings for a measurement. The query returns the current setting.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | INPUT | OUTPUT | Selects whether the local Input or Output source settings are treated as input or output. |
enum - Returns the current local Input or Output source setting.
MEASUrement:MEAS1:HIGHLEVel:CONFIGuration INPUT MEASUrement:MEAS1:HIGHLEVel:CONFIGuration? might return
:MEASUrement:MEAS<x>:HIGHLEVel:L2LTOL2Nset / query
Sets or queries local input Line-to-Line to Line-to-Neutral Conversion for the selected measurement. A value of 1 enables the conversion and 0 disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | 0 | 1 | Enables or disables local input Line-to-Line to Line-to-Neutral Conversion. |
enum - Returns the current local input Line-to-Line to Line-to-Neutral Conversion setting.
MEASUrement:MEAS1:HIGHLEVel:L2LTOL2N 1 enables local input Line-to-Line to Line-to-Neutral Conversion. MEASUrement:MEAS1:HIGHLEVel:L2LTOL2N? might return MEASUrement:HIGHLEVel:L2LTOL2N 0, indicating local input Line-to-Line to Line-to-Neutral Conversion is disabled.
:MEASUrement:MEAS<x>:HIGHLEVel:LINESelectedset / query
Sets or queries the local input select lines.
| Name | Type | Values | Description |
|---|---|---|---|
| line | enum | ABCB | ACBC | BACA | AN | BN | CN | Selects the local input line configuration. |
:MEASUrement:MEAS<x>:HIGHLEVel:OUTL2LTOL2Nset / query
Sets or queries local output Line-to-Line to Line-to-Neutral Conversion. A value of 1 enables the conversion, and 0 disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables local output Line-to-Line to Line-to-Neutral Conversion. |
enum - Returns the current setting for local output Line-to-Line to Line-to-Neutral Conversion.
MEASUrement:MEAS?:HIGHLEVel:OUTL2LTOL2N 1 MEASUrement:MEAS?:HIGHLEVel:OUTL2LTOL2N? might return MEASUrement:MEAS?:HIGHLEVel:OUTL2LTOL2N 0, indicating local output Line-to-Line to Line-to-Neutral Conversion is disabled.
Sets or queries the local output select lines.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | XYZY | XZYZ | YXZX | XN | YN | ZN | Selects the local output select lines. |
enum - Returns the local output select lines setting.
MEASUrement:MEAS?:HIGHLEVel:OUTLINESelected XYZY MEASUrement:MEAS?:HIGHLEVel:OUTLINESelected? might return MEASUrement:MEAS?:HIGHLEVel:OUTLINESelected XYZY, indicating the local output select lines is XYZY.
:MEASUrement:MEAS<x>:HIGHLEVel:OUTWIRingset / query
Sets or queries the local output wiring for the selected measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| wiring | enum | P1W2V1I1 | P1W3V2I2 | P3W3V3I3 | P3W4 | DCP1W2 | Selects the local output wiring. |
enum - Returns the current local output wiring.
MEASUrement:MEAS1:HIGHLEVel:OUTWIRing P1W2V1I1 MEASUrement:MEAS1:HIGHLEVel:OUTWIRing? might return MEASUrement:MEAS1:HIGHLEVel:OUTWIRing P1W2V1I1, indicating the local output wiring is configured as P1W2V1I1.
:MEASUrement:MEAS<x>:HIGHLEVel:USEGLOBALset / query
Sets or queries whether the IMDA source settings are global or local.
:MEASUrement:MEAS<x>:HIGHLEVel:WIRingset / query
Sets or queries the local input wiring for the specified measurement. The measurement number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Specifies the measurement number. |
| wiring | enum | P1W2V1I1 | P1W3V2I2 | P3W3V2I2 | P3W3V3I3 | P3W3 | DCP1W2 | Selects the local input wiring. |
enum - Returns the current local input wiring setting.
MEASUrement:MEAS1:HIGHLEVel:WIRing P1W2V1I1 sets the local input wiring for measurement 1 as P1W2V1I1. MEASUrement:MEAS1:HIGHLEVel:WIRing? might return MEASUrement:MEAS1:HIGHLEVel:WIRing P1W2V1I1, indicating the local input wiring is configured as P1W2V1I1.
:MEASUrement:MEAS<x>:HIGHREFVoltageset / query
Sets or queries the high reference voltage value for the "time outside level" measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | High reference voltage value. |
:MEASUrement:MEAS<x>:HLEVel:OUTPut:UGLobalset / query
Turns the output global settings for a measurement on or off. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Sets the output global settings for the measurement. |
MEASUrement:MEAS1:HLEVel:OUTPut:UGLobal ON MEASUrement:MEAS1:HLEVel:OUTPut:UGLobal?
:MEASUrement:MEAS<x>:HTORqueset / query
Sets or queries the measurement High Torque value for the selected measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 11 - 10000000 | Specifies the High Torque value of the measurement. |
:MEASUrement:MEAS<x>:HVOLtageset / query
Sets or queries the High Voltage value for a specified measurement. Requires the IMDA-MECH license on MSO 5, 6, and 6B series instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| voltage | real | 1 - 100 | High Voltage value of the measurement. |
real - Returns the High Voltage value of the specified measurement.
MEASUrement:MEAS1:HVOLtage 15.2 sets the High Voltage value for measurement 1 to 15.2. MEASUrement:MEAS1:HVOLtage? might return MEASUrement:MEAS1:HVOLtage 15.2, indicating the High Voltage value for measurement 1 is 15.2.
:MEASUrement:MEAS<x>:IDLETimeset / query
Sets or queries the idle time for the measurement when the measurement type is burst width. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| idle time | real | - | Specifies the idle time. |
real - Returns the idle time for the measurement.
MEASUrement:MEAS1:IDLETime 40.0E-6 sets the idle time to 40.0 μs. MEASUrement:MEAS1:IDLETime? might return MEASUREMENT:MEAS1:IDLETIME 50.0000E-6 indicating the idle time is 50.0 μs.
:MEASUrement:MEAS<x>:INPUTLEVelset / query
Sets or queries the input trigger voltage level for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Measurement number. |
| level | real | -500 - +500 | Trigger voltage level. |
real (V) - Returns the input trigger level for the specified measurement.
MEASUrement:MEAS1:INPUTLEVel 60 MEASUrement:MEAS3:INPUTLEVel?
:MEASUrement:MEAS<x>:INPUTPOwerset / query
Sets or queries the input power value for IEC-Class C and Class D harmonics standard.
| Name | Type | Values | Description |
|---|---|---|---|
| power | real | W | Specifies the input power value for class C harmonics standard. |
returns
MEASUrement:MEAS1:INPUTPOwer 100W MEASUrement:MEAS1:INPUTPOwer?
:MEASUrement:MEAS<x>:JITTERSummary:DCDset / query
Sets or queries whether DCD is included in the jitter summary for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
:MEASUrement:MEAS<x>:JITTERSummary:DDJset / query
Sets or queries whether DDJ is included in the jitter summary for the specified measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| state | enum | 0 | 1 | 1 adds the DDJ measurement as part of the jitter summary; 0 does not add it. |
enum - Returns whether the DDJ measurement is part of the jitter summary for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:DDJ 0 MEASUrement:MEAS4:JITTERSummary:DDJ? might return MEASUREMENT:MEAS4:JITTERSUMMARY:DDJ 1
:MEASUrement:MEAS<x>:JITTERSummary:DJset / query
Sets or queries whether DJ is included in the jitter summary for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
enum - Returns whether DJ is included in the jitter summary for the measurement.
MEASUrement:MEAS4:JITTERSummary:DJ 0 MEASUrement:MEAS4:JITTERSummary:DJ?
:MEASUrement:MEAS<x>:JITTERSummary:DJDDset / query
Sets or queries whether DJ-dd is included in the jitter summary for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | x - x | Measurement number specified by x. |
| state | enum | 0 | 1 | 0 do not add the DJDD measurement as part of jitter summary; 1 add the DJDD measurement as part of jitter summary. |
enum - Returns whether DJDD is part of the jitter summary for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:DJDD 0 specifies the DJDD measurement is not part of the jitter summary. MEASUrement:MEAS4:JITTERSummary:DJDD? might return MEASUREMENT:MEAS4:JITTERSUMMARY:DJDD 1 indicating the DJDD measurement is part of the jitter summary.
:MEASUrement:MEAS<x>:JITTERSummary:DRset / query
Sets or queries whether DR is included in the jitter summary for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Adds or does not add the DR measurement as part of the jitter summary. |
MEASUrement:MEAS4:JITTERSummary:DR 0 specifies that the DR measurement is not part of the jitter summary.
Sets or queries whether EyeWidth@BER is included in the jitter summary for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | 1 adds the EyeWidth@BER measurement as part of the jitter summary; 0 does not add it. |
enum - Returns whether EyeWidth@BER is part of the jitter summary for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:EYEWIDTHBER 0 MEASUrement:MEAS4:JITTERSummary:EYEWIDTHBER?
:MEASUrement:MEAS<x>:JITTERSummary:ISIset / query
Sets or queries whether ISI is included in the jitter summary for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| state | enum | 0 | 1 | 0 does not add the ISI measurement as part of jitter summary; 1 adds the ISI measurement as part of jitter summary. |
MEASUrement:MEAS4:JITTERSummary:ISI 0 MEASUrement:MEAS4:JITTERSummary:ISI?
:MEASUrement:MEAS<x>:JITTERSummary:NPJset / query
Sets or queries whether NPJ is included in the jitter summary for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | 0 | 1 | Adds or does not add the NPJ measurement as part of the jitter summary. |
enum - Returns the current NPJ jitter-summary setting for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:NPJ 0 MEASUrement:MEAS4:JITTERSummary:NPJ? might return MEASUREMENT:MEAS4:JITTERSUMMARY:NPJ 1
:MEASUrement:MEAS<x>:JITTERSummary:PJset / query
Sets or queries whether PJ is included in the jitter summary for the specified measurement. Measurements are identified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | 0 | 1 | Adds or removes the PJ measurement as part of the jitter summary. |
enum - Returns whether the PJ measurement is part of the jitter summary.
MEASUrement:MEAS4:JITTERSummary:PJ 0 MEASUrement:MEAS4:JITTERSummary:PJ?
:MEASUrement:MEAS<x>:JITTERSummary:PLset / query
Sets or queries whether the PL measurement is included in the jitter summary for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 - 6 | Specifies the measurement number. |
| state | enum | 0 | 1 | Adds or removes the PL measurement from the jitter summary. |
enum - Returns whether the PL measurement is part of the jitter summary for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:PL 0 specifies that the PL measurement is not part of the jitter summary. MEASUrement:MEAS4:JITTERSummary:PL? might return MEASUREMENT:MEAS4:JITTERSUMMARY:PL 1 indicating the PL measurement is part of the jitter summary.
:MEASUrement:MEAS<x>:JITTERSummary:RJset / query
Sets or queries whether RJ is included in the jitter summary for the specified measurement. Measurements are identified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | 1 adds the RJ measurement as part of the jitter summary; 0 does not add it. |
enum - Returns whether RJ is included in the jitter summary for the specified measurement.
MEASUrement:MEAS4:JITTERSummary:RJ 0 MEASUrement:MEAS4:JITTERSummary:RJ? might return MEASUREMENT:MEAS4:JITTERSUMMARY:RJ 1 indicating the RJ measurement is part of the jitter summary.
:MEASUrement:MEAS<x>:JITTERSummary:RJDDset / query
Sets or queries whether RJ-dd is included in the jitter summary for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables inclusion of RJ-dd in the jitter summary. |
enum - Returns whether RJ-dd is included in the jitter summary.
:MEASUrement:MEAS<x>:JITTERSummary:TIEset / query
Sets or queries whether TIE is included in the jitter summary for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 - 6 | Specifies the measurement number. |
| state | enum | 0 | 1 | 0 do not add the TIE measurement as part of jitter summary; 1 add the TIE measurement as part of jitter summary. |
enum - Returns whether TIE is included in the jitter summary for the measurement; 1 indicates it is part of the jitter summary, 0 indicates it is not.
MEASUrement:MEAS4:JITTERSummary:TIE 0 MEASUrement:MEAS4:JITTERSummary:TIE? might return MEASUREMENT:MEAS4:JITTERSUMMARY:TIE 1
:MEASUrement:MEAS<x>:JITTERSummary:TJBERset / query
Sets or queries whether TJ@BER is included in the jitter summary for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 | Specifies the measurement number. |
| state | enum | 0 | 1 | Adds or removes the TJ@BER measurement as part of the jitter summary. |
MEASUrement:MEAS4:JITTERSummary:TJBER 0 MEASUrement:MEAS4:JITTERSummary:TJBER? might return MEASUREMENT:MEAS4:JITTERSUMMARY:TJBER 1
:MEASUrement:MEAS<x>:LABelset / query
Sets or queries the label for the specified measurement. The label is stored in Percent Encoding format because it can contain non 7-bit ASCII text.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| label | string | - | Measurement label. |
MEASUrement:MEAS1:LABel "Delay" MEASUrement:MEAS1:LABel?
:MEASUrement:MEAS<x>:LINESelectedset / query
Sets or queries the selected lines for measurement x. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| line selection | enum | ABCB | ACBC | BACA | XYZY | XZYZ | YXZX | Selected lines for the measurement. |
enum - Returns the selected lines for measurement x.
:MEASUrement:MEAS<x>:LOWREFVoltageset / query
Sets or queries the low reference voltage value for the "time outside level" measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| low reference voltage | real | V | Low reference voltage value for the selected configuration. |
real (V) - Returns the low reference voltage value for the selected measurement.
MEASUrement:MEAS1:LOWREFVoltage -1.30 MEASUrement:MEAS1:LOWREFVoltage?
:MEASUrement:MEAS<x>:LTORqueset / query
Sets or queries the measurement Low Torque value. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0 - 10000000 | Low Torque value of the selected measurement. |
real - Returns the Low Torque value for the selected measurement.
MEASUrement:MEAS1:LTORque 10.5 MEASUrement:MEAS1:LTORque?
:MEASUrement:MEAS<x>:LTYPeset / query
Sets or returns the level type for measurement x as auto or custom. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| level type | enum | AUTO | CUSTom | Specifies the value for the level type. |
enum - Returns the current level type for measurement x.
MEASUrement:MEAS1:LTYPe AUTO MEASUrement:MEAS1:LTYPe?
Sets or returns the value for the level type as auto or custom. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | AUTO | CUSTom | Level type setting. |
enum - Returns the current level type setting.
MEASUrement:MEAS1:LTYPe AUTO MEASUrement:MEAS1:LTYPe?
:MEASUrement:MEAS<x>:LUNITsset / query
Sets or returns the value for the level units as percentage or absolute. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | PERCent | ABSolute | Specifies the value for the level units. |
enum - Returns the current level units setting.
MEASUrement:MEAS1:LUNITs PERCent MEASUrement:MEAS1:LUNITs?
Sets or returns the value for the level units as percentage or absolute. Measurements are specified by x.
enum - Returns the current level units setting.
MEASUrement:MEAS1:LUNITs PERCent MEASUrement:MEAS1:LUNITs?
:MEASUrement:MEAS<x>:LVOLtageset / query
Sets or queries the Low Voltage value for the specified measurement. Measurement number x selects which measurement is affected.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| low voltage | real | -100 - 100 | Low Voltage value of the measurement. |
returns
MEASUrement:MEAS1:LVOLtage 10.5 MEASUrement:MEAS1:LVOLtage?
Sets or returns the Low Voltage value for measurement x. Requires an IMDA-MECH license on MSO 5, 6, and 6B series instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Specifies the measurement number. |
| voltage | real | -100 - 100 | Specifies the Low Voltage value of the measurement. |
string - Returns the Low Voltage value setting for the specified measurement.
MEASUrement:MEAS1:LVOLtage 10.5 MEASUrement:MEAS1:LVOLtage? might return MEASUrement:MEAS1:LVOLtage 10.5
:MEASUrement:MEAS<x>:MAXCUrrentset / query
Sets or queries the maximum current for a measurement. The query returns the current maximum current setting.
| Name | Type | Values | Description |
|---|---|---|---|
| current | real | - | Maximum current value. |
real - The current maximum current setting.
MEASUrement:MEAS1:MAXCUrrent 5.0000 MEASUrement:MEAS1:MAXCUrrent?
Returns the maximum current setting for the selected measurement. The query may return the command with the current value appended.
real - The maximum current setting for the selected measurement.
MEASUrement:MEAS1:MAXCUrrent 5.0000 MEASUrement:MEAS1:MAXCUrrent?
:MEASUrement:MEAS<x>:MAXCycleset / query
Sets or queries the maximum cycle value for the DDRTERRN and DDRTERRMN measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 2 - 50 | Specifies the measurement number. |
| value | integer | 2 - 50 | Maximum cycle range limit value. |
integer - Returns the maximum cycle value for the specified measurement.
MEASurement:MEAS2:MAXCycle 45 sets the maximum cycle value for measurement 2 to 45. MEASurement:MEAS1:MAXCycle? might return MEASurement:MEAS1:MAXCycle 17, indicating the maximum cycle value is set to 17 for measurement 1.
Sets or queries the maximum cycle value for the DDRTERRN and DDRTERRMN measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 2 - 50 | Specifies the measurement number. |
integer - Returns the maximum cycle value for the selected measurement.
MEASurement:MEAS2:MAXCycle 45 sets the maximum cycle value for measurement 2 to 45. MEASurement:MEAS1:MAXCycle? might return MEASurement:MEAS1:MAXCycle 17, indicating the maximum cycle value is set to 17 for measurement 1.
:MEASUrement:MEAS<x>:MAXTimeset / query
Sets or returns the maximum gate voltage 1 or 2 value for Tdt measurement. Measurements are specified by x.
Sets or queries the maximum gate voltage 1 or 2 value for Tdt measurement. Measurements are specified by x.
:MEASUrement:MEAS<x>:MAXG<x>Voltageset / query
Sets or queries the maximum gate voltage for measurement x. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 2 | Specifies the gate voltage number. |
| voltage | real | - | Specifies the maximum gate voltage. |
string - May return the maximum gate voltage setting for measurement x.
MEASUrement:MEAS1:MAXG1Voltage 10.0000 MEASUrement:MEAS1:MAXG1Voltage? might return MEASUrement:MEAS1:MAXGVoltage 10.0000, indicating the maximum gate voltage 1 value is 10.0000.
Sets or queries the maximum gate voltage for measurement x. The valid measurement index x is 1 or 2.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 2 | Measurement index. |
real - Returns the maximum gate voltage value for measurement x.
MEASUrement:MEAS1:MAXG1Voltage 10.0000 MEASUrement:MEAS1:MAXG1Voltage?
:MEASUrement:MEAS<x>:MAXVoltageset / query
Sets or queries the maximum input voltage for measurement x. The value is specified in volts in the range of -61 V to +61 V.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | -61 - +61 | The maximum input voltage. |
real (V) - Returns the maximum input voltage.
MEASUrement:MEAS<x>:MAXVoltage <NR2> MEASUrement:MEAS<x>:MAXVoltage?
Sets or queries the maximum input voltage for measurement x. The value must be in the range of -61 V to +61 V.
| Name | Type | Values | Description |
|---|---|---|---|
| voltage | real | -61 - +61 | Maximum input voltage. |
real (V) - Returns the maximum input voltage.
MEASUrement:MEAS<x>:MAXVoltage 10.0000 MEASUrement:MEAS<x>:MAXVoltage?
:MEASUrement:MEAS<x>:MEASRange:GLOBalset / query
Sets or queries the range settings global flag for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | - | - | Specifies the measurement number. |
| state | enum | OFF | ON | 0 | 1 | OFF or 0 sets range settings independently for each measurement; ON or 1 applies global measurement range settings to all measurements. |
enum - Returns the current global range setting for the measurement.
MEASUrement:MEAS1:MEASRange:GLOBal 1 applies global measurement range settings to all the measurements' range settings. MEASUrement:MEAS1:MEASRange:GLOBal? might return MEASUREMENT:MEAS1:MEASRANGE:GLOBAL 0 indicating that range settings can be set independently for each individual measurement.
Sets or queries the range settings global flag for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Enables or disables global measurement range settings for the measurement. |
enum - Returns the range settings global flag for the measurement.
MEASUrement:MEAS1:MEASRange:GLOBal 1 applies global measurement range settings to all the measurements' range settings. MEASUrement:MEAS1:MEASRange:GLOBal? might return MEASUREMENT:MEAS1:MEASRANGE:GLOBAL 0 indicating that range settings can be set independently for each individual measurement.
:MEASUrement:MEAS<x>:MEASRange:MAXset / query
Sets or queries the range maximum value for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | The maximum measurement range limit value. |
real - Returns the maximum range value for the specified measurement.
MEASUrement:MEAS1:MEASRange:MAX 2.50 sets the maximum range to 2.5 V. MEASUrement:MEAS1:MEASRange:MAX? might return MEASUREMENT:MEAS1:MEASRANGE:MAX 1.0000 indicating the maximum range is 1.0 V.
Sets or queries the maximum measurement range value for measurement x. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The maximum measurement range limit value. |
real - Returns the maximum range value for the specified measurement.
MEASUrement:MEAS1:MEASRange:MAX 2.50 sets the maximum range to 2.5 V. MEASUrement:MEAS1:MEASRange:MAX? might return MEASUREMENT:MEAS1:MEASRANGE:MAX 1.0000 indicating the maximum range is 1.0 V.
:MEASUrement:MEAS<x>:MEASRange:MINset / query
Sets or queries the range minimum value for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| value | real | - | Minimum measurement range limit value. |
real - Returns the minimum measurement range limit value.
MEASUrement:MEAS1:MEASRange:MIN -1.0 MEASUrement:MEAS1:MEASRange:MIN?
Sets or queries the minimum measurement range value for the specified measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| range minimum value | real | - | Minimum measurement range limit value. |
real - Returns the minimum range value for the specified measurement.
MEASUrement:MEAS1:MEASRange:MIN -1.0 MEASUrement:MEAS1:MEASRange:MIN?
:MEASUrement:MEAS<x>:MEASRange:STATEset / query
Sets or queries the range state for the specified measurement. Use it to turn measurement range limits on or off.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Turns measurement range limits off or on. |
enum - Returns the range state for the specified measurement.
MEASUrement:MEAS1:MEASRange:STATE 0 MEASUrement:MEAS1:MEASRange:STATE?
Sets or queries the range state for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
enum - Returns the measurement range state.
MEASUrement:MEAS1:MEASRange:STATE 0 MEASUrement:MEAS1:MEASRange:STATE? might return MEASUREMENT:MEAS1:MEASRANGE:STATE 1 indicating the measurement range limits are on.
:MEASUrement:MEAS<x>:MEASureset / query
Sets or queries the signal source for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
Sets or queries the signal source for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
:MEASUrement:MEAS<x>:MECH:CPRotationset / query
Sets the cycles per rotation for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | The measurement number. |
| cycles per rotation | real | - | The number of cycles per rotation. |
MEASUrement:MEAS1:MECH:CPRotation 10.0000 sets the number of cycles per rotation as 10. MEASUrement:MEAS1:MECH:CPRotation? might return MEASUrement:MEAS1:MECH:CPRotation 10.0000, indicating that the number of cycles per rotation is 10.
Sets or queries the cycles per rotation for the measurement. Requires the IMDA-MECH license on MSO 5B and 6B series instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | - | - | Measurement number x in MEAS<x>. |
| cycles per rotation | real | - | Number of cycles per rotation. |
real - Returns the current number of cycles per rotation.
MEASUrement:MEAS1:MECH:CPRotation 10.0000 sets the number of cycles per rotation as 10. MEASUrement:MEAS1:MECH:CPRotation? might return MEASUrement:MEAS1:MECH:CPRotation 10.0000, indicating that the number of cycles per rotation is 10.
:MEASUrement:MEAS<x>:MECH:EINDexzset / query
Sets or queries the Index Z check box state for the specified measurement. The state can be enabled or disabled using ON/OFF or 1/0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Enables or disables the Index Z check box state. |
enum - Returns the Index Z check box state as ON or OFF.
MEASUrement:MEAS1:MECH:EINDexz ON MEASUrement:MEAS1:MECH:EINDexz?
Queries the Index Z check box state for the specified mechanical measurement. The returned value indicates whether Index Z is enabled or disabled.
enum - Returns the Index Z check box state for the specified measurement.
MEASUrement:MEAS1:MECH:EINDexz? might return MEASUREMENT:MEAS1:MECH:EINDexz ON, indicating the Index Z check box state is enabled.
:MEASUrement:MEAS<x>:MECH:GRATioset / query
Sets or queries the gear ratio for the specified mechanical measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| ratio | real | 0.001 - 1000 | Gear ratio value for the specified measurement. |
real - Returns the gear ratio value for the specified measurement.
MEASUrement:MEAS1:MECH:GRATio 1.000E-3 MEASUrement:MEAS1:MECH:GRATio?
Sets or queries the gear ratio for the specified measurement x. The gear ratio value must be between 0.001 and 1000.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0.001 - 1000 | Gear ratio value for the specified measurement. |
real - Returns the gear ratio value for the specified measurement.
MEASUrement:MEAS1:MECH:GRATio 1.000E-3 MEASUrement:MEAS1:MECH:GRATio?
:MEASUrement:MEAS<x>:MECH:MUNitsset / query
Sets or queries the units of the specific measurement. The available units are NM, OZINCH, FTLB, INCHLB, DEGREES, and RADIANS.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | NM | OZINCH | FTLB | INCHLB | DEGREES | RADIANS | Defines the results units of the measurement. |
enum - Returns the current measurement units for MEAS<x>:MECH. The response indicates one of the defined units.
MEASUrement:MEAS1:MECH:MUNits DEGREES MEASUrement:MEAS1:MECH:MUNits? might return MEASUREMENT:MEAS1:MECH:MUNits DEGREES
Sets or queries the results units of measurement x for mechanical measurements. The query returns the current units selection.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | NM | OZINCH | FTLB | INCHLB | DEGREES | RADIANS | Results units of the measurement. |
enum - Returns the current results units setting for the measurement.
MEASUrement:MEAS1:MECH:MUNits DEGREES MEASUrement:MEAS1:MECH:MUNits? might return MEASUREMENT:MEAS1:MECH:MUNits DEGREES, indicating the results units of the measurement is DEGREES.
:MEASUrement:MEAS<x>:MECH:PPAirsset / query
Sets or queries the number of pole pairs for the specified measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 20 | The number of pole pairs for the specified measurement. |
integer - The number of pole pairs for the specified measurement.
MEASUrement:MEAS1:MECH:PPAirs 4 defines the number of pole pairs for the specified measurement as 4. MEASUrement:MEAS1:MECH:PPAirs? might return MEASUREMENT:MEAS1:MECH:PPAirs 4 indicating the number of pole pairs for the specified measurement is 4.
Sets or queries the number of pole pairs for the specified measurement x. The valid range is 1 to 20.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 20 | Number of pole pairs for the specified measurement. |
integer - Returns the number of pole pairs for the specified measurement.
MEASUrement:MEAS1:MECH:PPAirs 4 defines the number of pole pairs for the specified measurement as 4. MEASUrement:MEAS1:MECH:PPAirs? might return MEASUREMENT:MEAS1:MECH:PPAirs 4 indicating the number of pole pairs for the specified measurement is 4.
:MEASUrement:MEAS<x>:MECH:PPRotationset / query
Sets or queries the pulses per rotation for the specified measurement. The value is an NR1 integer in the range 1 to 10000.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 - x | Specifies the measurement number. |
| pulses per rotation | integer | 1 - 10000 | Defines the pulses per rotation of the measurement. |
integer - Returns the pulses per rotation for the specified measurement.
MEASUrement:MEAS1:PPRotation 25 defines the pulses per rotation for measurement 1 as 25. MEASUrement:MEAS1:PPRotation? might return MEASUrement:MEAS1:PPRotation 25, indicating the pulses per rotation for measurement 1 is 25.
Returns or sets the pulses per rotation for the specified measurement. The value is an NR1 integer in the range 1 to 10000.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 10000 | Measurement number. |
integer - Returns the pulses per rotation setting for the specified measurement.
MEASUrement:MEAS1:PPRotation 25 defines the pulses per rotation for measurement 1 as 25. MEASUrement:MEAS1:PPRotation? might return MEASUrement:MEAS1:PPRotation 25, indicating the pulses per rotation for measurement 1 is 25.
:MEASUrement:MEAS<x>:MECH:STYPeset / query
Sets or queries the local measurement sensor type for the selected measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| sensor type | enum | HSENSOR | QEI | RESOLVER | SCOSINE | Selects the local measurement sensor type. |
enum - Returns the current sensor type for the selected measurement.
MEASUrement:MEAS1:MECH:STYPe HSENSOR MEASUrement:MEAS1:MECH:STYPe?
Sets or queries the local measurement sensor type for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | 1 | Specifies the measurement number. |
| type | enum | HSENSOR | QEI | RESOLVER | SCOSINE | Sets the sensor type. |
enum - Returns the current local measurement sensor type.
MEASUrement:MEAS1:MECH:STYPe HSENSOR MEASUrement:MEAS1:MECH:STYPe? might return MEASUREMENT:MEAS1:MECH:STYPe HSENSOR, indicating the sensor type is HSENSOR.
:MEASUrement:MEAS<x>:MINCycleset / query
Sets or queries the minimum cycle value for the DDRTERRN and DDRTERRMN measurements.
Sets or queries the minimum cycle value for the DDRTERRN and DDRTERRMN measurements.
returns
:MEASUrement:MEAS<x>:NVALUeset / query
Sets or queries the number of unit intervals used for the Base Measurement Type of NUnitInterval.
| Name | Type | Values | Description |
|---|---|---|---|
| N | integer | 2 - 50 | Number of unit intervals used for the measurement. |
Sets or queries the number of unit intervals used for the Base Measurement Type of NUnitInterval.
:MEASUrement:MEAS<x>:NVMethodset / query
Sets or queries the Nominal Voltage Method for green power measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | CUSTOM | Specifies the Nominal Voltage Method. |
enum - Returns the current Nominal Voltage Method.
MEASUrement:MEAS1:NVMethod AUTO MEASUrement:MEAS1:NVMethod?
Sets or queries the Nominal Voltage Method for green power measurements. Requires the PWR option.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | CUSTOM | Nominal Voltage Method setting. |
enum - Returns the current Nominal Voltage Method.
MEASUrement:MEAS1:NVMethod AUTO MEASUrement:MEAS1:NVMethod?
:MEASUrement:MEAS<x>:OBWMethodset / query
Sets or queries the RF measurement Occupied Bandwidth method type for measurement x. The default method is percentage of power.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | percOfPwr | dBDown | Occupied Bandwidth method type. |
enum - Returns the occupied bandwidth method type for the selected measurement.
MEASUrement:MEAS1:OBWMethod percOfPwr MEASUrement:MEAS1:OBWMethod?
Sets or queries the RF measurement Occupied Bandwidth method type. Measurements are specified by x.
enum - Returns the occupied bandwidth method type for the specified measurement.
MEASUrement:MEAS1:OBWMethod percOfPwr specifies the method type to percentage of power. MEASUrement:MEAS1:OBWMethod? might return MEASUREMENT:MEAS1:OBWMethod percOfPwr, indicating the method type is percentage of power.
:MEASUrement:MEAS<x>:ODDEVenset / query
Sets or queries the harmonics odd/even display selection for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ALL | EVEN | ODD | Selects which harmonics results to display. |
enum - Returns the current harmonics odd/even selection.
MEASurement:MEAS1:ODDEVen ALL displays all the harmonics results for measurement 1.
Sets or queries harmonics oddeven for the specified measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| mode | enum | ALL | EVEN | ODD | Selects which harmonics results to display. |
enum - Returns the harmonics oddeven setting.
MEASurement:MEAS1:ODDEVen ALL displays all the harmonics results for measurement 1.
:MEASUrement:MEAS<x>:OFILters:LOWPass:FREQset / query
Sets or returns the cut-off frequency value for a measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| cut-off frequency value | real | - | Specifies the cut-off frequency value for a measurement. |
real - Returns the cut-off frequency value for the measurement.
MEASurement:MEAS1:OFILters:LOWPass:FREQ 500E+6 MEASurement:MEAS1:OFILters:LOWPass:FREQ?
Sets or returns the cut-off frequency value for a measurement. Requires the IMDA-MECH license on MSO 5, 6, and 6B series instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| value | real | - | Cut-off frequency value for the measurement. |
real - Returns the cut-off frequency value of the measurement.
MEASurement:MEAS1:OFILters:LOWPass:FREQ 500E+6 MEASurement:MEAS1:OFILters:LOWPass:FREQ?
:MEASUrement:MEAS<x>:OFILters:LOWPass:SPECset / query
Sets or returns the low pass filter specification for a measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| specification | enum | NONE | FIRST | SECOND | THIRD | Selects the low pass filter specification for the measurement. |
enum - Returns the low pass filter specification for the measurement.
Sets or returns the low pass filter specification for a measurement.
enum - Returns the low pass filter specification for the selected measurement.
:MEASUrement:MEAS<x>:OSANgleset / query
Sets or queries the specified measurement offset angle.
| Name | Type | Values | Description |
|---|---|---|---|
| angle | real | -360 - 360 | Offset angle of the measurement. |
real - Returns the measurement offset angle.
MEASurement:MEAS1:OSANgle 10 MEASurement:MEAS1:OSANgle?
Sets or queries the specified measurement offset angle.
| Name | Type | Values | Description |
|---|---|---|---|
| offset angle | real | -360 - 360 | Offset angle of the measurement. |
real (deg) - Returns the offset angle of the measurement.
MEASurement:MEAS1:OSANgle 10 MEASurement:MEAS1:OSANgle?
:MEASUrement:MEAS<x>:OUTEDGEQUALifierset / query
Sets or queries the local output edge qualifier source for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the local output edge qualifier. |
enum - Returns the current local output edge qualifier source.
MEASUrement:MEAS1:OUTEDGEQUALifier CH3 sets the local output edge qualifier source to channel 3. MEASUrement:MEAS1:OUTEDGEQUALifier? might return MEASUrement:MEASUrement:MEAS1:OUTEDGEQUALifier CH2 indicating the local output edge qualifier source is channel 2.
Sets or queries the local output edge qualifier source for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the local output edge qualifier. |
enum - Returns the selected local output edge qualifier source.
MEASUrement:MEAS1:OUTEDGEQUALifier CH3 sets the local output edge qualifier source to channel 3. MEASUrement:MEAS1:OUTEDGEQUALifier? might return MEASUrement:MEAS1:OUTEDGEQUALifier CH2 indicating the local output edge qualifier source is channel 2.
:MEASUrement:MEAS<x>:OUTFILTers:LOWPass:FREQset / query
Sets or queries the measurement output low pass filter cutoff frequency on the scope. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| frequency | real | 20 - 10e6 | Specifies the output filter cutoff frequency. |
real (Hz) - Returns the current output low pass filter cutoff frequency.
MEASurement:MEAS1:OUTFILTers:LOWPass:FREQ 2.000E+6 MEASurement:MEAS1:OUTFILTers:LOWPass:FREQ?
Queries the measurement output low pass filter cutoff frequency for measurement x. The command also sets the cutoff frequency when used without '?'.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
real (Hz) - Returns the output filter cutoff frequency.
MEASurement:MEAS1:OUTFILTers:LOWPass:FREQ? might return MEASurement:MEAS1:OUTFILTers:LOWPass:FREQ 2.000E+6, indicating the value for the output filter cutoff
:MEASUrement:MEAS<x>:OUTFILTers:LOWPass:SPECset / query
Sets or queries the measurement output low pass filter specification order on the scope. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| order | enum | NONE | FIRST | SECOND | THIRD | Specifies the filter order. |
enum - Returns the filter order setting.
MEASUrement:MEAS1:OUTFILTers:LOWPass:SPEC SECOND MEASUrement:MEAS1:OUTFILTers:LOWPass:SPEC? might return MEASUrement:MEAS1:OUTFILTers:LOWPass:SPEC SECOND, indicating the filter order is set to second.
Sets or queries the measurement output low pass filter specification filter order on the scope. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | NONE | FIRST | SECOND | THIRD | Specifies the filter order. |
enum - Returns the filter order setting.
MEASUrement:MEAS1:OUTFILTers:LOWPass:SPEC SECOND MEASUrement:MEAS1:OUTFILTers:LOWPass:SPEC?
:MEASUrement:MEAS<x>:OUTPUT<x>VOLTageset / query
Sets or queries the voltage level for the specified output voltage source n.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
Sets or queries the voltage level for the specified output voltage source n.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
:MEASUrement:MEAS<x>:PASSFAILENabledset / query
Returns or sets the pass/fail test enable status for the specified measurement. If enabled, pass/fail testing is turned on for that measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 - 1 | Enables or disables pass/fail testing for the specified measurement. |
integer - Returns the pass/fail test enable status for the specified measurement; 1 indicates enabled and 0 indicates disabled.
MEASUrement:MEAS1:PASSFAILENabled 1 enables pass fail testing for the specified measurement. MEASUrement:MEAS1:PASSFAILENabled? might return MEASUrement:MEAS1:PASSFAILENabled 0 indicating that pass fail testing for the specified measurement is disabled.
Returns or sets the pass/fail test enable status for the specified measurement. If enabled, pass/fail testing is turned on for that measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables pass fail testing for the specified measurement; 1 enables and 0 disables. |
integer - Returns the enable status for the specified measurement, where 1 indicates enabled and 0 indicates disabled.
MEASUrement:MEAS1:PASSFAILENabled 1 enables pass fail testing for the specified measurement. MEASUrement:MEAS1:PASSFAILENabled? might return MEASUrement:MEAS1:PASSFAILENabled 0 indicating that pass fail testing for the specified measurement is disabled.
:MEASUrement:MEAS<x>:PASSFAILHIGHlimitset / query
Returns or sets the high limit for a measurement test. It is used as the test value when the "fail when" criteria is set to "less than" or "greater than".
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | - | Sets the high limit for a measurement test. |
MEASUrement:MEAS1:PASSFAILHIGHlimit 710 MEASUrement:MEAS1:PASSFAILHIGHlimit? might return MEASUrement:MEAS1:PASSFAILHIGHlimit 710
Returns or sets the high limit for a measurement test. The value is used as the test limit when the fail-when criteria is set to less than or greater than.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number to which this command applies. |
| value | real | - | High limit value for the measurement test. |
real - The current high limit for the specified measurement.
MEASUrement:MEAS1:PASSFAILHIGHlimit 710 MEASUrement:MEAS1:PASSFAILHIGHlimit?
:MEASUrement:MEAS<x>:PASSFAILLIMitset / query
Returns or sets the limit for a measurement test. It is used as the test value when the "fail when" criteria is set to "less than" or "greater than"; measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Sets the limit for the measurement test. |
MEASUrement:MEAS1:PASSFAILLIMit 710 MEASUrement:MEAS1:PASSFAILLIMit?
Returns or sets the limit for a measurement test. It is used as the test value when the "fail when" criteria is set to "less than" or "greater than".
| Name | Type | Values | Description |
|---|---|---|---|
| <NR2> | real | - | Sets the limit for a measurement test; the limit is a number which a measurement result will be tested against. |
MEASUrement:MEAS1:PASSFAILLIMit 710 MEASUrement:MEAS1:PASSFAILLIMit? might return MEASUrement:MEAS1:PASSFAILLIMit 710
:MEASUrement:MEAS<x>:PASSFAILLOWlimitset / query
Returns or sets the low limit for a measurement test. The low limit is used as the test value when the fail-when criteria is set to less than or greater than.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number identifier. |
| low limit | real | - | Low limit value for the measurement test. |
MEASUrement:MEAS1:PASSFAILLOWlimit 690 MEASUrement:MEAS1:PASSFAILLOWlimit?
Returns or sets the low limit for a measurement test. The low limit is used as the test value when the fail-when criteria is set to "less than" or "greater than".
string - Returns the low limit setting for the specified measurement.
MEASUrement:MEAS1:PASSFAILLOWlimit 690 MEASUrement:MEAS1:PASSFAILLOWlimit?
:MEASUrement:MEAS<x>:PASSFAILMARginset / query
Returns or sets the allowed margin for limit comparisons for all pass/fail checks. The margin is given as a percentage and defaults to 0.05 (5%).
| Name | Type | Values | Description |
|---|---|---|---|
| margin | real | % | Allowed margin for pass/fail limit comparisons. |
Returns or sets the allowed margin for limit comparisons for all pass/fail checks. The margin is given as a percentage with a default value of 0.05 representing 5%.
| Name | Type | Values | Description |
|---|---|---|---|
| margin | real | % | Allowed margin for limit comparisons. |
:MEASUrement:MEAS<x>:PASSFAILWHENset / query
Sets or returns the condition on which a measurement test fails. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | LESSthan | GREATERthan | Equals | NOTEQuals | INSIDErange | OUTSIDErange | Condition for measurement test failure. |
enum - Returns the condition on which a measurement test fails.
MEASUrement:MEAS1:PASSFAILWHEN LESSthan specifies the condition for measurement 1 test failure as less that the given limit.
Sets or returns the condition on which a measurement test fails. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | LESSthan | GREATERthan | Equals | NOTEQuals | INSIDErange | OUTSIDErange | Condition for measurement test failure. |
enum - Returns the current measurement test failure condition.
MEASUrement:MEAS1:PASSFAILWHEN LESSthan
:MEASUrement:MEAS<x>:PATTERNDETECTIONset / query
Sets or queries the pattern detection type for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANUAL | AUTO automatically detects the pattern; MANUAL requires manually detecting the pattern. |
enum - Returns the pattern detection type for the measurement.
MEASUrement:MEAS1:PATTERNDETECTION MANUAL MEASUrement:MEAS1:PATTERNDETECTION? might return MEASUREMENT:MEAS1:PATTERNDETECTION AUTO
Sets or queries the pattern detection type for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
enum - Returns the pattern detection type for the measurement.
MEASUrement:MEAS1:PATTERNDETECTION MANUAL MEASUrement:MEAS1:PATTERNDETECTION?
:MEASUrement:MEAS<x>:PATTERNLENgthset / query
Sets or queries the pattern length for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The pattern length. |
real - Returns the pattern length.
MEASUrement:MEAS1:PATTERNLENgth 3.0 MEASUrement:MEAS1:PATTERNLENgth? might return MEASUREMENT:MEAS1:PATTERNLENGTH 2.0000 indicating the pattern length is 2.0.
Sets or queries the pattern length for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| pattern length | real | - | The pattern length. |
real - Returns the pattern length.
MEASUrement:MEAS1:PATTERNLENgth 3.0 MEASUrement:MEAS1:PATTERNLENgth?
:MEASUrement:MEAS<x>:PATTERNTYPeset / query
Sets or queries the pattern type for measurement x. The available pattern types are repeating or arbitrary.
| Name | Type | Values | Description |
|---|---|---|---|
| pattern type | enum | REPeating | ARBitrary | Selects the measurement pattern type. |
enum - Returns the current pattern type for measurement x.
MEASUrement:MEAS1:PATTERNTYPe ARBITRARY MEASUrement:MEAS1:PATTERNTYPe?
Queries the pattern type for measurement x. The response indicates whether the pattern is repeating or arbitrary.
enum - Returns the pattern type for the specified measurement.
MEASUrement:MEAS1:PATTERNTYPe? might return MEASUREMENT:MEAS1:PATTERNTYPE REPEATING indicating a repeating pattern.
:MEASUrement:MEAS<x>:PCOUNtset / query
Sets or returns the number of pulses for measurement x. Measurements are specified by x and this command requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | Number of pulses. |
integer - Returns the number of pulses.
MEASUrement:MEAS1:PCOUNt 10 sets the number of pulses to 10. MEASUrement:MEAS1:PCOUNt? might return MEASUREMENT:MEAS1:PCOUNt 10, indicating the number of pulses is 10.
Sets or queries the number of pulses for measurement x. Measurements are specified by x and this command requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | The number of pulses. |
integer - Returns the number of pulses.
MEASUrement:MEAS1:PCOUNt 10 sets the number of pulses to 10. MEASUrement:MEAS1:PCOUNt? might return MEASUREMENT:MEAS1:PCOUNt 10, indicating the number of pulses is 10.
:MEASUrement:MEAS<x>:PERFREQ:EDGEset / query
Sets or queries the edge selection used for the PERFREQ measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| edge | enum | FIRST | RISE | FALL | Selects whether the measurement is computed between the first detected edge, rising edges, or falling edges. |
MEASUrement:MEAS1:PERFREQ:EDGE RISE specifies computing the measurement between Rising edges. measurement:meas1:perfreq:edge? might return MEASUREMENT:MEAS1:PERFREQ:EDGE FIRST if the measurement is computed between edges of the first type edge found.
Sets or queries the edge selection used for the PERFREQ measurement. The result indicates whether the first, rising, or falling edge is used for the measurement computation.
enum - Returns the edge selection used for the PERFREQ measurement.
MEASUrement:MEAS1:PERFREQ:EDGE RISE measurement:meas1:perfreq:edge? might return MEASUREMENT:MEAS1:PERFREQ:EDGE FIRST
:MEASUrement:MEAS<x>:PFREquencyset / query
Sets or returns the PJ max frequency value for a PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| <NR3> | real | - | Specifies the value of PJ max frequency for PSIJ measurement. |
real - Returns the PJ max frequency value for the specified PSIJ measurement.
MEASUrement:MEAS2:PFREquency 1.0000 MEASUrement:MEAS2:PFREquency?
Sets or returns the PJ max frequency value of a PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Value of PJ max frequency for PSIJ measurement. |
real - Returns the PJ max frequency value of the PSIJ measurement.
MEASUrement:MEAS2:PFREquency 1.0000 MEASUrement:MEAS2:PFREquency?
:MEASUrement:MEAS<x>:POLarityset / query
Sets the polarity used for the measurement. The slice shows that INVERTED specifies inverted polarity, and the query form may return the current polarity such as NORMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | INVERTED | Specifies inverted polarity. |
MEASUrement:MEAS1:POLarity INVERTED specifies inverted polarity. MEASUrement:MEAS1:POLarity? might return MEASUREMENT:MEAS1:POLARITY NORMAL indicating normal polarity.
Returns the polarity setting for the specified measurement. The example shows the query may return NORMAL or INVERTED polarity.
enum - Returns the present measurement polarity setting.
MEASUrement:MEAS1:POLarity? might return MEASUREMENT:MEAS1:POLARITY NORMAL indicating normal polarity.
:MEASUrement:MEAS<x>:POPUlation:GLOBalset / query
Sets or queries the population settings global flag for measurement x. OFF/0 allows population settings to be changed independently for each measurement; ON/1 applies the global population settings to all measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | ON | 0 | 1 | Selects whether population settings are independent per measurement or applied globally. |
MEASUrement:MEAS1:POPUlation:GLOBal 1 applies the global population settings to all the measurements' population settings.
Sets or queries the population settings global flag for the specified measurement. OFF/0 allow population settings to be changed independently for each measurement; ON/1 apply the global population settings to all measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| state | enum | OFF | ON | 0 | 1 | Selects whether population settings are independent per measurement or applied globally. |
enum - Returns the population settings global flag for the specified measurement.
MEASUrement:MEAS1:POPUlation:GLOBal 1 applies the global population settings to all the measurements' population settings.
:MEASUrement:MEAS<x>:POPowerset / query
Sets or queries the Percentage Power to be measured for the Occupied Bandwidth measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 60.0 - 99.9 | Percentage Power value to be measured. |
MEASUrement:MEAS1:POPower 99 sets power to 99%. MEASUrement:MEAS1:POPower? might return MEASUREMENT:MEAS1:POPower 99 indicating the power is set to 99%.
Sets or queries the Percentage Power to be measured for the Occupied Bandwidth measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 60.0 - 99.9 | Sets the Percentage Power value. |
MEASUrement:MEAS1:POPower 99 sets power to 99%. MEASUrement:MEAS1:POPower? might return MEASUREMENT:MEAS1:POPower 99 indicating the power is set to 99%.
:MEASUrement:MEAS<x>:POPUlation:LIMIT:STATEset / query
Sets or queries the population limit state for the specified measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Turns the population limit off or on. |
enum - Returns the population limit state.
MEASUrement:MEAS1:POPUlation:LIMIT:STATE 0 turns off the population limit. MEASUrement:MEAS1:POPUlation:LIMIT:STATE? might return MEASUREMENT:MEAS1:POPULATION:LIMIT:STATE 1 indicating the population limit is on.
Sets or queries the population limit state for the specified measurement. The measurement number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Turns the population limit off or on. |
enum - Returns the population limit state for the specified measurement.
MEASUrement:MEAS1:POPUlation:LIMIT:STATE 0 turns off the population limit. MEASUrement:MEAS1:POPUlation:LIMIT:STATE? might return MEASUREMENT:MEAS1:POPULATION:LIMIT:STATE 1 indicating the population limit is on.
:MEASUrement:MEAS<x>:POPUlation:LIMIT:VALueset / query
Sets or queries the population limit value for the specified measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | The current limit value. |
real - Returns the current population limit value.
MEASUrement:MEAS1:POPUlation:LIMIT:VALue 2000 sets the population limit to 2000. MEASUrement:MEAS1:POPUlation:LIMIT:VALue? might return MEASUREMENT:MEAS1:POPULATION:LIMIT:VALUE 1000 indicating the limit is set to 1000.
Sets or queries the population limit value for the specified measurement. The measurement number is specified by x.
real - Returns the current population limit value for the measurement.
:MEASUrement:MEAS<x>:POWERFACtorset / query
Sets or queries the power factor value for IEC-Class C type harmonics standard. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| power factor value | real | - | Power factor value for class C harmonics standard. |
real - Returns the power factor value for the specified measurement.
MEASUrement:MEAS1:POWERFACtor 50 MEASUrement:MEAS1:POWERFACtor?
Sets or queries the power factor value for IEC-Class C type harmonics standard. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| power factor value | real | - | Power factor value for the class C harmonics standard. |
real - Returns the power factor value.
MEASUrement:MEAS1:POWERFACtor 50 sets the power factor value to 50. MEASUrement:MEAS1:POWERFACtor? might return MEASUREMENT:MEAS1:POWERFACtor 50 indicating the power factor is 50.
:MEASUrement:MEAS<x>:PREGionset / query
Sets or returns the pulse region for a measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| region | enum | FPULse | SPULse | MPULse | Selects the pulse region. |
enum - Returns the current pulse region.
MEASUrement:MEAS1:PREGion Fpulse sets the pulse region to Fpulse. MEASUrement:MEAS1:PREGion? might return MEASUREMENT:MEAS1:PREGion Fpulse, indicating the pulse region is set to Fpulse.
Sets or returns the pulse region for a measurement. Requires a WBG-DPT license.
enum - Returns the pulse region setting.
MEASUrement:MEAS1:PREGion Fpulse MEASUrement:MEAS1:PREGion?
:MEASUrement:MEAS<x>:PRESistanceset / query
Sets or returns the value of probe resistance for the WBG measurement. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Specifies the value for probe resistance of the WBG measurement. |
real - Returns the value of probe resistance for the selected measurement.
MEASUrement:MEAS2:PRESistance 1.0000E+3 MEASUrement:MEAS2:PRESistance?
Sets or returns the probe resistance value for a WBG measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| value | real | - | Value of probe resistance for the WBG measurement. |
real - Returns the probe resistance value for the specified measurement.
MEASUrement:MEAS2:PRESistance 1.0000E+3 MEASUrement:MEAS2:PRESistance?
:MEASUrement:MEAS<x>:PTHResholdset / query
Sets or returns the PJ threshold value of the PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| value | real | - | Specifies the value of PJ threshold for the PSIJ measurement. |
real - Returns the PJ threshold value for the PSIJ measurement.
MEASUrement:MEAS2:PTHReshold 1.00E-21 MEASUrement:MEAS2:PTHReshold?
Sets or returns the PJ threshold value of the PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| threshold | real | - | Specifies the value of PJ threshold for PSIJ measurement. |
real - The PJ threshold value for the specified measurement.
MEASUrement:MEAS2:PTHReshold 1.00E-21 MEASUrement:MEAS2:PTHReshold?
:MEASUrement:MEAS<x>:PWIDthset / query
Sets or returns pulse width for the specified measurement. Measurements are specified by x.
:MEASUrement:MEAS<x>:PUNVoltageset / query
Sets or queries the Per Unit Nominal Voltage for green power measurements. Requires option PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| voltage | real | V | Specifies the Per Unit Nominal Voltage of green power measurements. |
MEASUrement:MEAS1:PUNVoltage 170.0000 sets the Per Unit Nominal Voltage as 170 V. MEASUrement:MEAS1:PUNVoltage? might return MEASUrement:MEAS1:PUNVoltage 170.0000, indicating that the Per Unit Nominal Voltage is 170 V.
Sets or queries the Per Unit Nominal Voltage for green power measurements. Requires option PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | V | Specifies the Per Unit Nominal Voltage of green power measurements. |
real (V) - Returns the Per Unit Nominal Voltage setting.
MEASUrement:MEAS1:PUNVoltage 170.0000 sets the Per Unit Nominal Voltage as 170 V. MEASUrement:MEAS1:PUNVoltage? might return MEASUrement:MEAS1:PUNVoltage 170.0000, indicating that the Per Unit Nominal Voltage is 170 V.
Sets or queries the pulse width for measurement x. The query returns the current pulse width value.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Specifies the pulse width. |
real - Returns the pulse width value for measurement x.
MEASUrement:MEAS1:PWIDth 15.0000 MEASUrement:MEAS1:PWIDth?
:MEASUrement:MEAS<x>:REConstwfmset / query
Enables or disables reconstructed clock for DPM measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns reconstructed clock on or off for the DPM measurement. |
Enables or disables reconstructed clock for DPM measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns reconstructed clock for DPM measurement on or off. |
:MEASUrement:MEAS<x>:REDGeset / query
Turns the Refine edge on qualifier on or off for the specified measurement. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the Refine edge settings for measurement x. |
MEASUrement:MEAS1:REDGe ON MEASUrement:MEAS1:REDGe?
Turns the Refine edge on qualifier on or off for the specified measurement. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Specifies whether Refine edge settings are enabled or disabled. |
enum - Returns the Refine edge on qualifier state for the specified measurement.
MEASUrement:MEAS1:REDGe ON turns on the Refine edge on qualifier. MEASUrement:MEAS1:REDGe? might return MEASUREMENT:MEAS1:REDGe ON, indicating the Refine edge settings has been turned on.
Sets or queries the value used as the high reference level of the falling edge when the measurement's reference level method is set to absolute. This command affects the results of rise and fall measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
real - Returns the high reference level value used for the falling edge when the reference level method is absolute.
Sets or queries the value used as the high reference level of the falling edge when the measurement reference level method is set to absolute. This affects the results of rise and fall measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
real - Returns the value used as the high reference level of the falling edge when the measurement reference level method is set to absolute.
Sets or queries the low reference level of the falling edge when the measurement reference level method is set to absolute. The command affects the results of rise and fall measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | V | The low reference level in volts. |
real (V) - Returns the low reference level in volts.
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0 V sets the low reference level to 0.0 V. MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0000E+00, indicating that the absolute low reference level is set to 0.0 V.
Sets or queries the low reference level used for the falling edge when the measurement ref level method is absolute. This command affects the results of rise and fall measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | V | The low reference level in volts. |
real (V) - Returns the low reference level in volts.
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0 V sets the low reference level to 0.0 V. MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0000E+00, indicating that the absolute low reference level is set to 0.0 V.
Sets or queries the mid reference level of the falling edge when the measurement ref level method is set to absolute. This setting affects period, frequency, delay, and all cyclic measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| NR3 | real | V | The mid reference level in volts. |
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLMID 0.0 V MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLMID? might return
Sets or queries the value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute. Measurements are specified by x.
real (V) - Returns the mid reference level in volts.
MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0 V sets the low reference level to 0.0 V. MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:FALLLOW 0.0000E+00, indicating that the absolute low reference level is set to 0.0 V.
Sets or queries the hysteresis of the reference level when the measurement's ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| hysteresis | real | - | The hysteresis value used for autoset. |
real - Returns the hysteresis value set for the measurement.
MEASUrement:MEAS1:REFLevels1:ABSolute:HYSTeresis 25.0E-3 sets the hysteresis to 25 mV. MEASUrement:MEAS1:REFLevels1:ABSolute:HYSTeresis? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:HYSTERESIS 30.0000E-3 indicating the hysteresis is set to 30 mV.
Sets or queries the hysteresis of the reference level when the measurement's ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
real - Returns the hysteresis value used for autoset.
MEASUrement:MEAS1:REFLevels1:ABSolute:HYSTeresis 25.0E-3 sets the hysteresis to 25 mV. MEASUrement:MEAS1:REFLevels1:ABSolute:HYSTeresis? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:HYSTERESIS 30.0000E-3 indicating the hysteresis is set to 30 mV.
Sets or queries the value used as the high reference level of the rising edge when the measurement's ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| level | real | - | The high reference level, and is the zero percent level when the measurement's Ref level method is set to Absolute. |
real - Returns the high reference level setting.
MEASUrement:MEAS1:REFLevels1:ABSolute:RISEHigh 1.50 sets the high reference level to 1.5 V. MEASUrement:MEAS1:REFLevels1:ABSolute:RISEHigh? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:RISEHIGH 1.0000 indicating the high reference level is set to 1.0 V.
Sets or queries the value used as the high reference level of the rising edge when the measurement's ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| high reference level | real | - | The high reference level, and is the zero percent level when the measurement's Ref level method is set to Absolute. |
real - Returns the high reference level setting.
MEASUrement:MEAS1:REFLevels1:ABSolute:RISEHigh 1.50 MEASUrement:MEAS1:REFLevels1:ABSolute:RISEHigh?
Sets or queries the low reference level of the rising edge when the measurement ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | The low reference level (zero percent level) used when the measurement's Ref level method is set to Absolute. |
MEASUrement:MEAS1:REFLevels1:ABSolute:RISELow -1.50 MEASUrement:MEAS1:REFLevels1:ABSolute:RISELow?
Sets or queries the value used as the low reference level of the rising edge when the measurement's reference level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Measurement number. |
| level | real | - | Low reference level; this is the zero percent level when the measurement's ref level method is set to Absolute. |
MEASUrement:MEAS1:REFLevels1:ABSolute:RISELow? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:RISELOW -1.0000 indicating the low reference level is -1.0 V.
Sets or queries the value used as the mid reference level of the rising edge when the measurement's ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mid reference level | real | V | The mid reference level (where 50% is equal to MID) used to calculate the mid reference level when the measurement's Ref level method is set to Absolute. |
MEASUrement:MEAS1:REFLevels1:ABSolute:RISEMid 30.0E-3 MEASUrement:MEAS1:REFLevels1:ABSolute:RISEMid?
Sets or queries the mid reference level of the rising edge when the measurement ref level method is set to absolute. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| NR3 | real | - | The mid reference level used to calculate the mid reference level when the measurement's Ref level method is set to Absolute. |
real (V) - Returns the mid reference level.
MEASUrement:MEAS1:REFLevels1:ABSolute:RISEMid 30.0E-3 MEASUrement:MEAS1:REFLevels1:ABSolute:RISEMid? might return
Sets the absolute reference-level type for the specified measurement. The type can be the same for both levels or set independently.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | SAME | UNIQue | Sets whether the absolute levels are the same or can be set independently. |
MEASUrement:MEAS1:REFLevels1:ABSolute:TYPE UNIQUE specifies that the absolute levels can be set independently. MEASUrement:MEAS1:REFLevels1:ABSolute:TYPE? might return MEASUREMENT:MEAS1:REFLEVELS1:ABSOLUTE:TYPE SAME indicating the absolute levels are set the same.
Sets or queries the method used to calculate absolute reference levels for a measurement. The measurement number is specified by x.
enum - Returns the absolute reference level type.
MEASUrement:MEAS1:REFLevels1:ABSolute:TYPE UNIQUE MEASUrement:MEAS1:REFLevels1:ABSolute:TYPE?
:MEASUrement:MEAS<x>:REFLevels<x>:BASETopset / query
Sets or queries the method used to calculate the TOP and BASE used to calculate reference levels for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MINMax | MEANhistogram | MODEhistogram | EYEhistogram | Method used to calculate reference levels for the measurement. |
enum - Returns the current reference level method.
MEASUrement:MEAS1:REFLevels1:BASETop MINMAX specifies that reference levels are relative to the measurement MEASUrement:MEAS1:REFLevels1:BASETop? might return MEASUREMENT:MEAS1:REFLEVELS1:BASETOP AUTO
Sets or queries the method used to calculate the TOP and BASE used to calculate reference levels for the measurement. The measurement number is specified by x.
enum - Returns the reference level method.
MEASUrement:MEAS1:REFLevels1:BASETop? might return MEASUREMENT:MEAS1:REFLEVELS1:BASETOP AUTO indicating the instrument automatically chooses a reference level method.
:MEASUrement:MEAS<x>:REFLevels<x>:METHodset / query
Sets or queries the reference level method for a measurement. PERCENT calculates reference levels as a percent relative to HIGH and LOW; ABSOLUTE sets them explicitly using the ABSolute reference-level commands.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | PERCent | ABSolute | Reference level calculation method. |
enum - Returns the current reference level method.
MEASUREMENT:MEAS1:REFLEVELS1:METHOD ABSOLUTE MEASUREMENT:MEAS1:REFLEVELS1:METHOD? might return MEASUREMENT:MEAS1:REFLEVELS1:METHOD PERCENT
Sets or queries the reference-level method for the specified measurement. Percent-based reference levels are calculated relative to HIGH and LOW, while Absolute uses explicit values.
enum - Returns the reference-level method currently in use for the specified measurement.
MEASUREMENT:MEAS1:REFLEVELS1:METHOD ABSOLUTE MEASUREMENT:MEAS1:REFLEVELS1:METHOD?
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| percentage | real | % | Percentage used to calculate the high reference level; 100% is equal to HIGH. |
real (%) - Returns the current percentage setting for the high reference level of the falling edge.
MEASUrement:MEAS1:REFLevels1:PERCent:FALLHigh 95.0 MEASUrement:MEAS1:REFLevels1:PERCent:FALLHigh?
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. The measurement number is specified by x.
real (%) - Returns the percentage used to calculate the high reference level of the falling edge.
MEASUrement:MEAS1:REFLevels1:PERCent:FALLHigh 95.0 MEASUrement:MEAS1:REFLevels1:PERCent:FALLHigh?
Sets or queries the percentage used to calculate the low reference level of the falling edge when the measurement's ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| percentage | real | % | Percentage used to calculate the low reference level of the falling edge. |
MEASUrement:MEAS1:REFLevels1:PERCent:FALLLow 5.0 sets the low reference level of the falling edge is 5%. MEASUrement:MEAS1:REFLevels1:PERCent:FALLLow? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:FALLLOW 10.0000 indicating the low reference level of the falling edge is 10%.
Sets or queries the percentage used to calculate the low reference level of the falling edge when the measurement ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| percentage | real | % | Percentage where 100% is equal to HIGH, used to calculate the low reference level. |
real (%) - Returns the low reference level of the falling edge as a percentage value.
MEASUrement:MEAS1:REFLevels1:PERCent:FALLLow 5.0 MEASUrement:MEAS1:REFLevels1:PERCent:FALLLow? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:FALLLOW 10.0000
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement's ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| NR3 | real | - | Percentage used to calculate the mid reference level; 50% is equal to MID. |
MEASUrement:MEAS1:REFLevels1:PERCent:FALLMid 50.0 sets the mid reference level of the falling edge to 50%. MEASUrement:MEAS1:REFLevels1:PERCent:FALLMid? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:FALLMID 50.0000 indicating the mid reference level of the falling edge is set to 50%.
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | - | Percentage where 50% is equal to MID used to calculate the mid reference level. |
MEASUrement:MEAS1:REFLevels1:PERCent:FALLMid 50.0 sets the mid reference level of the falling edge to 50%. MEASUrement:MEAS1:REFLevels1:PERCent:FALLMid? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:FALLMID 50.0000 indicating the mid reference level of the falling edge is set to 50%.
Sets or queries the percentage used to calculate the hysteresis level when the measurement's ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| hysteresis | real | % | Percentage used to calculate the hysteresis level when the ref level method is set to Percent. |
real (%) - Returns the hysteresis percentage.
MEASUrement:MEAS1:REFLevels1:PERCent:HYSTeresis 5.0 sets the hysteresis level to 5%. MEASUrement:MEAS1:REFLevels1:PERCent:HYSTeresis? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:HYSTERESIS 5.0000 indicating the hysteresis is 5.0%.
Sets or queries the percentage hysteresis used for the autoset. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| hysteresis | real | % | Hysteresis value used for the autoset. |
real (%) - Returns the hysteresis value used for the autoset.
MEASUrement:MEAS1:REFLevels1:PERCent:HYSTeresis 5.0 sets the hysteresis level to 5%. MEASUrement:MEAS1:REFLevels1:PERCent:HYSTeresis? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:HYSTERESIS 5.0000 indicating the hysteresis is 5.0%.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement's ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| percentage | real | % | Percentage used to calculate the high reference level of the rising edge when ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the high reference level of the rising edge.
MEASUrement:MEAS1:REFLevels1:PERCent:RISEHigh 95.0 MEASUrement:MEAS1:REFLevels1:PERCent:RISEHigh?
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| percentage | real | % | Percentage value used to calculate the high reference level of the rising edge when the ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to percent.
MEASUrement:MEAS1:REFLevels1:PERCent:RISEHigh 95.0 MEASUrement:MEAS1:REFLevels1:PERCent:RISEHigh? might return MEASUREMENT:MEAS1:REFLEVELS1:PERCENT:RISEHIGH 90.0000
Sets the low reference level percentage for the specified measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | % | The percentage used to calculate the low reference level when the measurement Ref level method is set to Percent. |
MEASUrement:MEAS1:REFLevels1:PERCent:RISELow 5.0 MEASUrement:MEAS1:REFLevels1:PERCent:RISELow?
Queries the low reference level percentage for the rising edge measurement reference levels. The measurement number is specified by x.
real (%) - Returns the low reference level percentage for the rising edge measurement reference levels.
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement ref level method is set to percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement | integer | 1 - 6 | Measurement number x. |
| percentage | real | 0 - 100 | Percentage used to calculate the mid reference level of the rising edge. |
real (%) - Returns the mid reference level percentage for the rising edge.
MEASUrement:MEAS1:REFLevels1:PERCent:RISEMid 50.0000 MEASUrement:MEAS1:REFLevels1:PERCent:RISEMid?
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement ref level method is set to Percent. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | % | Percentage used to calculate the mid reference level when the measurement Ref level method is set to Percent. |
real (%) - Returns the percentage used to calculate the mid reference level of the rising edge.
MEASUrement:MEAS1:REFLevels1:PERCent:RISEMid 50.0000 MEASUrement:MEAS1:REFLevels1:PERCent:RISEMid?
Specifies or queries the reference level percent type for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TENNinety | TWENtyeighty | CUSTom | Selects the percentage set used for Low, Mid, and High reference levels. |
MEASUrement:MEAS1:REFLevels1:PERCent:TYPE TWENtyeighty
Specifies or queries the reference level percent type for the measurement. The measurement number is specified by x.
enum - Returns the reference level percent type for the measurement.
MEASUrement:MEAS1:REFLevels1:PERCent:TYPE TWENtyeighty
:MEASUrement:MEAS<x>:REFModeset / query
Sets or queries the reference level mode for the measurement specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANual | Selects automatic reference level setup or manual reference level entry. |
enum - Returns the current reference level mode for the measurement.
MEASUrement:MEAS1:REFMode Manual MEASUrement:MEAS1:REFMode?
Sets or queries the reference level mode for the measurement. The measurement number is specified by x.
enum - Returns the reference level mode for the measurement.
MEASUrement:MEAS1:REFMode Manual MEASUrement:MEAS1:REFMode?
:MEASUrement:MEAS<x>:REFVoltageset / query
Sets or queries the reference voltage value for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| value | real | - | Reference voltage value for the selected configuration. |
real (V) - Returns the reference voltage value for the measurement.
MEASUrement:MEAS1:REFVoltage 30.E-3 sets the reference voltage value for the measurement to 30 mV. MEASUrement:MEAS1:REFVoltage? might return MEASUREMENT:MEAS1:REFVOLTAGE 0.0E+0 indicating the reference voltage value for the measurement is 0.0 V.
Sets or queries the reference voltage value for the specified measurement. The measurement number is specified by x.
real - Returns the reference voltage value for the selected configuration.
MEASUrement:MEAS1:REFVoltage 30.E-3 MEASUrement:MEAS1:REFVoltage?
:MEASUrement:MEAS<x>:REFVOLTAGE<x>Valset / query
Sets or queries the reference voltage for a specified rail within a specified measurement. The reference voltage is given in volts and can be in the range -500 V to +500 V.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Measurement number. |
| REFVOLTAGE<x> | integer | - | Rail number. |
| reference voltage | real | -500 - +500 | Reference voltage to set for the specified rail. |
real (V) - Returns the reference voltage of the specified rail for the specified measurement.
MEASUrement:MEAS1:REFVOLTAGE3Val –125 MEASUrement:MEAS3:REFVOLTAGE1Val?
Sets or queries the reference voltage for a specified measurement rail. The measurement number is x and the rail number is x; the value is in the range of -500 V to +500 V.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Measurement number (x). |
| rail number | integer | - | Rail number (x). |
| reference voltage | real | -500 - +500 | Reference voltage to set for the specified rail. |
real (V) - Returns the reference voltage of the specified rail, in volts.
MEASUrement:MEAS1:REFVOLTAGE3Val –125 MEASUrement:MEAS3:REFVOLTAGE1Val?
Returns the maximum value for all accumulated measurement acquisitions of the specified measurement. The measurement number is specified by x.
real - The maximum value for all accumulated measurement acquisitions of the specified measurement.
MEASUrement:MEAS1:RESUlts:ALLAcqs:MAXimum? might return MEASUREMENT:MEAS1:RESULTS:ALLACQS:MAXIMUM 2.420 indicating the maximum measurement value is 2.420 V.
Returns the mean value for all accumulated measurement acquisitions for measurement <x>.
real - The mean value for all accumulated measurement acquisitions for measurement <x>.
MEASUrement:MEAS1:RESUlts:ALLAcqs:MEAN? might return MEASUREMENT:MEAS1:RESULTS:ALLACQS:MEAN 2.2807617754647 indicating the measurement mean is 2.28 V.
Returns the minimum value for all accumulated measurement acquisitions for measurement <x>.
real - The minimum value for all accumulated measurement acquisitions for measurement <x>.
MEASUrement:MEAS1:RESUlts:ALLAcqs:MINimum? might return MEASUREMENT:MEAS1:RESULTS:ALLACQS:MINIMUM 2.220 indicating the measurement minimum value is 2.220 V.
Returns the peak-to-peak value for all accumulated measurement acquisitions for measurement <x>.
real - The peak-to-peak value for all accumulated measurement acquisitions for measurement <x>.
Returns the population measurement value for measurement <x>.
returns - The population measurement value for measurement <x>.
Returns the standard deviation for all accumulated measurement acquisitions for measurement <x>.
real - The standard deviation for all accumulated measurement acquisitions for measurement <x>.
Returns the maximum value found for the specified measurement since the last statistical reset. The measurement number is specified by x.
real - The maximum value found for the specified measurement since the last statistical reset.
MEASUrement:MEAS1:RESUlts:CURRentacq:MAXimum? might return MEASUREMENT:MEAS1:RESULTS:CURRENTACQ:MAXIMUM 2.280 indicating the current measurement maximum value is 2.28 V.
Query-only command that returns the mean value for the specified measurement in the current acquisition. MEAS<x> identifies the measurement number shown in the UI measurement badge.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Measurement number for which to return a value. |
real - The mean value accumulated for the specified measurement since the last statistical reset.
MEASUrement:MEAS3:RESUlts:CURRentacq:MEAN? might return MEASUREMENT:MEAS3:RESULTS:CURRENTACQ:MEAN 2.30 indicating the mean of measurement 3 in the current acquisition is 2.3 V.
Query-only command that returns the minimum value for the specified measurement in the current acquisition. The measurement number is specified by x.
real - The minimum value found for the specified measurement since the last statistical reset.
Returns the peak-to-peak value for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
real - The peak-to-peak value for the specified measurement.
MEASUrement:MEAS1:RESUlts:CURRentacq:PK2PK? might return MEASUREMENT:MEAS1:RESULTS:CURRENTACQ:PK2PK 0.0E+0 indicating the peak-to-peak value for the specified measurement for the current acquisition is 0.0 V.
Returns the population for the specified measurement for the current acquisition. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
integer - The population measurement value for the specified measurement.
MEASUrement:MEAS1:RESUlts:CURRentacq:POPUlation? might return MEASUREMENT:MEAS1:RESULTS:CURRENTACQ:POPULATION 1 indicating the population for the current measurement is 1 measurement.
Returns the standard deviation for the specified measurement for all acquisitions accumulated since statistics were last reset.
real - The standard deviation of values accumulated for the specified measurement since the last statistical reset.
Returns the maximum value for the specified measurement for each acquisition in the history. The measurement number is specified by x.
string - A comma-separated list of the maximum values for each acquisition in the history.
MEASUrement:MEAS1:RESUlts:HISTory:MAXimum? might return MEASUrement:MEAS1:RESUlts:HISTory:MAXimum 2.28,2.31,2.27 indicating there are three acquisitions in the history and the maximum value for measurement 1 is 2.28 V for the first acquisition, 2.31 V for the second acquisition and 2.27 V for the third acquisition.
Returns the mean value for the specified measurement for each acquisition in the history. The measurement number is specified by x.
real - A comma-separated list of the mean values for each acquisition in the history.
MEASUrement:MEAS1:RESUlts:HISTory:MEAN? might return MEASUREMENT:MEAS1:RESULTS:HISTORY:MEAN 2.30,2.25,2.32 indicating there are three acquisitions in the history and the mean value for measurement 1 is 2.3 V for the first acquisition, 2.25 V for the second acquisition, and 2.32 V for the third acquisition.
Returns the minimum value for the specified measurement for each acquisition in the history. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
real - A comma-separated list of the minimum values for each acquisition in the history.
MEASUrement:MEAS1:RESUlts:HISTory:MINimum? might return MEASUREMENT:MEAS1:RESULTS:HISTORY:MINIMUM 2.26,2.14,2.29 indicating there are three acquisitions in the history and the minimum value for measurement 1 is 2.26 V for the first acquisition, 2.14 V for the second acquisition, and 2.29 V for the third acquisition.
Returns the peak-to-peak value for the specified measurement for each acquisition in the history. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number to query. |
real - A comma-separated list of the peak-to-peak values for each acquisition in the history.
MEASUrement:MEAS1:RESUlts:HISTory:PK2PK? might return MEASUREMENT:MEAS1:RESULTS:HISTORY:PK2PK 0.0E+0,0.0E+0,0.0E+0 indicating there are three acquisitions in the history and the peak-to-peak value for measurement 1 for each acquisition is 0.0 V.
Returns the population value for the specified measurement for each acquisition in the history. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
integer - A comma-separated list of the population values for each acquisition in the history.
MEASUrement:MEAS<x>:RESUlts:HISTory:POPUlation? MEASUREMENT:MEAS<x>:RESULTS:HISTORY:POPULATION 1,1,1
Returns a comma-separated list of the standard deviation values for each acquisition in the history.
string - A comma-separated list of the standard deviation values for each acquisition in the history.
MEASUrement:MEAS<x>:RESUlts:HISTory:STDDev? might return MEASUREMENT:MEAS1:RESULTS:HISTORY:STDDEV 0.0E+0,0.0E+0,0.0E+0
:MEASUrement:MEAS<x>:RFREquencyset / query
Sets or returns the center frequency value of PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Center frequency value for the PSIJ measurement. |
MEASUrement:MEAS2:RFREquency 100.00E+3 MEASUrement:MEAS2:RFREquency? might return MEASUREMENT:MEAS2:RFREquency 100.00E+3 indicating the value of center frequency is 100.00E+3 for measurement 2.
Sets or queries the center frequency value of PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Center frequency value for the PSIJ measurement. |
real - Returns the center frequency value for the specified measurement.
MEASUrement:MEAS2:RFREquency 100.00E+3 MEASUrement:MEAS2:RFREquency?
:MEASUrement:MEAS<x>:RIPPLEFREQ<x>Valset / query
Sets or queries the ripple frequency per specified rail for Ripple measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| value | real | - | Ripple frequency value for the specified rail. |
Returns the ripple frequency setting for a specified rail of a specified measurement. The value is a frequency in the range of 1 Hz to 4 GHz.
real (Hz) - The ripple frequency value for the specified measurement rail.
MEASUrement:MEAS1:RIPPLEFREQ3Val 5.2e6 sets the ripple frequency for rail 3 of measurement 1 to 5.2 MHz. MEASUrement:MEAS3:RIPPLEFREQ1val? might return 1.0000E+6, indicating that the ripple frequency of rail 1 on measurement 3 is set to 1 MHz.
:MEASUrement:MEAS<x>:RRANGEset / query
Sets or returns the span value of a PSIJ measurement. Requires a DPM License.
| Name | Type | Values | Description |
|---|---|---|---|
| span | real | 1 Hz - 4 GHz | Value of span for the PSIJ measurement. |
real - Returns the current span value for the PSIJ measurement.
MEASUrement:MEAS2:RRANGE 100.000 MEASUrement:MEAS2:RRANGE?
Sets or returns the span value of a PSIJ measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Measurement number specified by MEAS<x>. |
| span | real | - | Span value for the PSIJ measurement. |
real - Returns the value of span for the specified measurement.
MEASUrement:MEAS2:RRANGE 100.000 MEASUrement:MEAS2:RRANGE?
:MEASUrement:MEAS<x>:RTSTdset / query
Sets or queries the ride through standard for green power measurements. Requires option PWR.
enum - Returns the current ride through standard for the measurement.
Sets or queries the ride through standard used for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Measurement number specified by x. |
enum - Returns the current ride through standard setting.
MEASUrement:MEAS1:RTSTd CEA sets the ride through standard as CEA. MEASUrement:MEAS1:RTSTd? might return MEASUrement:MEAS1:RTSTd CEA, indicating that the ride through standard is CEA.
:MEASUrement:MEAS<x>:RTYPeset / query
Sets or queries the result type used to calculate the measurement. Requires the WBG-DPT option.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | The measurement number. |
| mode | enum | PERCENTAGE | ABSOLUTE | Specifies the result type as percentage or absolute. |
enum - Returns the result type used to calculate the measurement.
MEASUrement:MEAS1:RTYPe PERCENTAGE MEASUrement:MEAS1:RTYPe?
Sets or queries the result type used to calculate the measurement. Requires option WBG-DPT.
enum - Returns the current result type used to calculate the measurement.
MEASUrement:MEAS1:RTYPe PERCENTAGE sets the result type as percentage. MEASUrement:MEAS1:RTYPe? might return MEASUrement:MEAS1:RTYPe ABSOLUTE, indicating that the result type is absolute.
:MEASUrement:MEAS<x>:SEQuenceset / query
Sets or queries the sequence of hall edges for the specified measurement number.
Sets or queries the motor Hall edges sequence for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| sequence | enum | ABC | ACB | Specifies the motor Hall edges sequence. |
enum - Returns the motor Hall edges sequence for the selected measurement.
MEASUrement:MEAS1:SEQuence ACB MEASUrement:MEAS1:SEQuence?
:MEASUrement:MEAS<x>:SIGNALFREQUEncyset / query
Sets or queries the line frequency for Harmonics and Ripple line frequency. The measurement number is specified by x.
enum - Returns the current line frequency setting.
MEASUrement:MEAS1:SIGNALFREQUEncy FIFTYHZ specifies the line frequency as 50 Hz for measurement 1. MEASUrement:MEAS1:SIGNALFREQUEncy? might return MEASUREMENT:MEAS1:SIGNALFREQUEncy FIFTYHZ, indicating the line frequency is 50 Hz.
Sets or queries the line frequency for Harmonics and Ripple line frequency. The measurement number is specified by x.
enum - Returns the selected line frequency setting.
MEASUrement:MEAS1:SIGNALFREQUEncy FIFTYHZ specifies the line frequency as 50 Hz for measurement 1. MEASUrement:MEAS1:SIGNALFREQUEncy? might return MEASUREMENT:MEAS1:SIGNALFREQUEncy FIFTYHZ, indicating the line frequency is 50 Hz.
:MEASUrement:MEAS<x>:SIGNALTypeset / query
Sets or queries the signal type of source 1 for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| mode | enum | CLOCK | DATA | AUTO | Sets the signal type of source 1 for the measurement. |
Returns or sets the signal type used for the specified measurement. The signal type can be selected automatically or set to clock or data.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
enum - Returns the current signal type setting for the specified measurement.
MEASUrement:MEAS1:SIGNALType CLOCK specifies a clock signal type. MEASUrement:MEAS1:SIGNALType? might return MEASUREMENT:MEAS1:SIGNALTYPE AUTO indicating the instrument automatically selects the signal type.
:MEASUrement:MEAS<x>:SJBANdwidthset / query
Sets or queries the SJ Bandwidth value for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| value | real | - | SJ Bandwidth value for the measurement. |
MEASUrement:MEAS1:SJBANdwidth 10000 MEASUrement:MEAS2:SJBANdwidth? might return MEASUrement:MEAS2:SJBANdwidth 10E6, indicating the measurement SJ Bandwidth is 10000.
Sets or queries the SJ Bandwidth value for the specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | SJ Bandwidth value for the measurement. |
real - Returns the SJ Bandwidth value for the measurement.
MEASUrement:MEAS1:SJBANdwidth 10000 sets the SJ Bandwidth for the measurement to 10000. MEASUrement:MEAS2:SJBANdwidth? might return MEASUrement:MEAS2:SJBANdwidth 10E6, indicating the measurement SJ Bandwidth is 10000.
Returns the measurement SJ frequency. The example shows the query response as the command followed by the frequency value.
real - The measurement SJ frequency value.
:MEASUrement:MEAS<x>:SLABsset / query
Sets or returns the start level in absolute value for the selected measurement. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | - | Specifies the measurement number. |
| value | real | - | Specifies the value for the start level in absolute. |
real - Returns the start level in absolute value for the selected measurement.
MEASUrement:MEAS1:SLABs -100.0000 MEASUrement:MEAS1:SLABs? might return MEASUrement:MEAS1:SLABs -100.0000, indicating the value for the start level is -100.
Sets or returns the value for the start level in absolute. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Specifies the value for the start level in absolute. |
real - Returns the value for the start level in absolute.
MEASUrement:MEAS1:SLABs -100.0000 sets the value for the start level to -100. MEASUrement:MEAS1:SLABs? might return MEASUrement:MEAS1:SLABs -100.0000, indicating the value for the start level is -100.
:MEASUrement:MEAS<x>:SLPCtset / query
Sets or returns the value for the start level in percentage. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Specifies the value for the start level in percentage. |
real - Returns the value for the start level in percentage.
MEASUrement:MEAS1:SLPCt 10.0000E-3 sets the value for the start level in percentage to 10.0000E-3. MEASUrement:MEAS1:SLPCt? might return MEASUrement:MEAS1:SLPCt 10.0000E-3, indicating the value for the start level in percentage is 10.0000E-3.
Sets or returns the value for the start level in percentage. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| value | real | - | Specifies the value for the start level in percentage. |
real - Returns the value for the start level in percentage.
MEASUrement:MEAS1:SLPCt 10.0000E-3 MEASUrement:MEAS1:SLPCt? might return MEASUrement:MEAS1:SLPCt 10.0000E-3, indicating the value for the start level in percentage is 10.0000E-3.
:MEASUrement:MEAS<x>:SLTYpeset / query
Sets or returns the start level source type for measurement x. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| source type | enum | VDS | ID | VGE | VCE | IC | Start level source type to select. |
enum - Returns the current start level source type.
MEASUrement:MEAS1:SLTYpe ID MEASUrement:MEAS1:SLTYpe?
:MEASUrement:MEAS<x>:SMOOTHINGFILTERset / query
Sets or queries the status of the smoothing filter for a measurement. A value of 1 enables smoothing filter and 0 disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 1 | Sets the smoothing filter state. |
integer - Returns 1 when smoothing filter is ON and 0 when it is OFF.
MEASUrement:MEAS1:SMOOTHINGFILTER 1 MEASUrement:MEAS1:SMOOTHINGFILTER?
:MEASUrement:MEAS<x>:SOURCEset / query
Sets or queries the local input source for the specified measurement. The source may be an analog channel, math channel, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the local input source. |
enum - When queried, returns the current local input source in the form MEASUrement:MEAS<x>:SOURCE CH<x>, MATH<x>, or REF<x>.
MEASUrement:MEAS1:SOURCE CH3 sets the local input source to channel 3. MEASUrement:MEAS1:SOURCE? might return MEASUrement:MEAS1:SOURCE CH2 indicating the local input source is channel 2.
:MEASUrement:MEAS<x>:SOUrce<x>set / query
Sets or queries the measurement source. The measurement number and source are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Source number for the measurement. |
enum - Returns the measurement source in the form MEASUrement:MEAS<x>:SOUrce CH<x>, MATH<x>, or REF<x>.
MEASUrement:MEAS1:SOUrce CH1 MEASUrement:MEAS1:SOUrce?
:MEASUrement:MEAS<x>:SPAN<x>Valset / query
Sets or returns the span value for PSIJ measurement.
:MEASUrement:MEAS<x>:SPECificationset / query
Sets or queries the specification for WBG reverse recovery measurements. Requires the WBG-DPT option.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement | integer | - | MEAS<x> specifies the measurement number. |
| specification | enum | JEP201 | JESD24 | Sets the WBG measurement specification. |
enum - Returns the current WBG measurement specification.
MEASUrement:MEAS1:SPECification JEP201 set the specification to JEP201 for measurement 1. MEASUrement:MEAS1:SPECification? might return MEASUrement:MEAS1:SPECification JEP201, indicating that the specification for measurement 1 is JEP201.
:MEASUrement:MEAS<x>:SRATeset / query
Sets the symbol rate for the selected measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1.0 - 5.0e9 | Symbol rate to set. |
real - Returns the current symbol rate.
MEASUrement:MEAS1:SRATe 3.84e6 MEASUrement:MEAS1:SRATe? might return MEASUREMENT:MEAS1:SRATe 3.84e6
:MEASUrement:MEAS<x>:SRHoset / query
Enables or disables the rho waveform for TDR measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Specifies whether rho waveform is enabled or disabled for TDR measurement. |
MEASUrement:MEAS1:SRHo ON MEASUrement:MEAS1:SRHo? might return MEASUrement:MEAS1:SRHo OFF indicating rho waveform is disabled.
:MEASUrement:MEAS<x>:SSC:NOMinalfreqset / query
Sets or queries the nominal frequency for an SSC measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| frequency | real | Hz | Sets the nominal frequency. |
real (Hz) - Returns the nominal frequency.
MEASUrement:MEAS1:SSC:NOMinalfreq 2.0E+9 sets the frequency to 2.0 GHz. MEASUrement:MEAS1:SSC:NOMinalfreq? might return MEASUREMENT:MEAS1:SSC:NOMINALFREQ 2.5000E+9 indicating the frequency is 2.5 GHz.
Sets or queries the frequency detection type for the measurement when the measurement type is SSC. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number. |
| mode | enum | AUTO | MANual | Frequency detection type. |
MEASUrement:MEAS1:SSC:NOMinalfreq:SELECTIONtype AUTO MEASUrement:MEAS1:SSC:NOMinalfreq:SELECTIONtype? might return MEASUREMENT:MEAS1:SSC:NOMINALFREQ:SELECTIONTYPE AUTO indicating the auto-detection type is selected.
:MEASUrement:MEAS<x>:SSDirectionset / query
Sets or returns the start search direction for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | FORWARD | BACKWARD | Start search direction for measurement. |
enum - Returns the start search direction for the measurement.
MEASUrement:MEAS1:SSDirection FORWARD MEASUrement:MEAS1:SSDirection?
Returns the pass/fail status, if applicable, for the selected measurement.
enum - PASS indicates that the user specified measurement limit has not been violated; FAIL indicates that the user specified measurement limit has been violated.
MEASUrement:MEAS1:STATUS? might return MEASUrement:MEAS1:STATUS PASS indicating that the user specified measurement limit has not been violated.
:MEASUrement:MEAS<x>:STLABsset / query
Sets or returns the value for the stop level in absolute. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The value for the stop level in absolute. |
MEASUrement:MEAS1:STLABs 5.0000 sets the value for the stop level in absolute to 5. MEASUrement:MEAS1:STLABs 5.0000? might return MEASUrement:MEAS1:STLABs 5.0000, indicating the value for the stop level in absolute is 5.
:MEASUrement:MEAS<x>:STLPctset / query
Sets or returns the value for the stop level in percentage. A WBG-DPT license is required.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Measurement number specified by <x>. |
| value | real | % | Stop level value in percentage. |
real (%) - Returns the value for the stop level in percentage.
MEASUrement:MEAS1:STLPct 10.0000E-3 MEASUrement:MEAS1:STLPct?
:MEASUrement:MEAS<x>:STLTYpeset / query
Sets or returns the stop level source type for the specified measurement. Requires a WBG-DPT license.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| source type | enum | VDS | ID | VGE | VCE | IC | Sets the stop level source type. |
enum - Returns the current stop level source type.
:MEASUrement:MEAS<x>:STSDirectionset / query
Sets or returns the stop search direction for the measurement specified by x. Requires the WBG-DPT License and is in the Wide Bandgap Analysis group.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | FORWARD | BACKWARD | Stop search direction for the measurement. |
enum - Returns the stop search direction for the measurement.
MEASUrement:MEAS1:STSDirection FORWARD MEASUrement:MEAS1:STSDirection?
:MEASUrement:MEAS<x>:STYPeset / query
Sets or queries the source type for the specified measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | VOLTage | CURRent | DIFFERENTIAL | SINGLE | Source type to set for the measurement. |
enum - Returns the current source type for the measurement.
MEASUrement:MEAS1:STYPe VOLTage MEASUrement:MEAS1:STYPe?
Returns the maximum value of the specified measurement for all acquisitions. The measurement is selected by a QString argument from a fixed list of measurement names.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies which measurement to query. |
real - The maximum value of the specified measurement, for all acquisitions.
MEASUrement:MEAS1:SUBGROUP:RESUlts:ALLAcqs:MAXimum? "INPUT" returns the maximum value of measurement INPUT, for all acquisitions.
Returns the mean value of the specified measurement for all acquisitions.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement name whose mean value is returned. |
real - The mean value of the specified measurement for all acquisitions.
MEASUrement:MEAS1:SUBGROUP:RESUlts:ALLAcqs:MEAN? "RAIL1DPMOVERSHOOT" returns the mean value of measurement RAIL1DPMOVERSHOOT, for all acquisitions.
Returns the minimum value of the specified measurement for all acquisitions.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement string for which the minimum is returned. |
real - The minimum value of the specified measurement, for all acquisitions.
MEASUrement:MEAS1:SUBGROUP:RESUlts:ALLAcqs:MINimum? "OUTPUT7" returns the minimum value of measurement OUTPUT7, for all acquisitions.
This query returns the peak-to-peak value of the measurement specified by the string, for all acquisitions.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies which measurement string to evaluate. |
real - The peak-to-peak value of the specified measurement for all acquisitions.
MEASUrement:MEAS1:SUBGROUP:RESUlts:ALLAcqs:PK2PK? "OUTPUT4" returns the peak-to-peak value of measurement OUTPUT4, for all acquisitions.
Returns the population value of the specified measurement for all acquisitions. Requires the 5-DPM or 6-DPM option.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | TIE | TJBER | RJdd | DJdd | PJ | DDJ | DCD | WIDTHBER | Specifies which measurement's population value to return. |
real - The population value of the specified measurement for all acquisitions.
MEASUrement:MEAS1:SUBGROUP:RESUlts:ALLAcqs:POPUlation? "RAIL1DPMUNDERSH
Returns the standard deviation value of the specified measurement for all acquisitions. Requires option 5-DPM or 6-DPM.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | TIE | TJBER | RJdd | DJdd | PJ | DDJ | DCD | WIDTHBER | Specifies the measurement name. |
real - Returns the standard deviation value of the specified measurement for all acquisitions.
Returns the maximum value of the measurement specified by the string, for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement name as a quoted string. |
real - Maximum value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:MAXimum? "INPUT" returns the maximum value of measurement INPUT, for the current acquisition.
This query returns the mean value of the measurement specified by the string, for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | L2LPH1VRMS | L2LPH1VCFactor | L2LPH1TruePwr | L2LPH1RePwr | L2LPH1AppPwr | L2LPH1PwrFactor | L2LPH1PhaseDiff | L2LPH1VPhase | L2LPH2VRMS | L2LPH2VCFactor | L2LPH2TruePwr | L2LPH2RePwr | L2LPH2AppPwr | L2LPH2PwrFactor | L2LPH2PhaseDiff | L2LPH2VPhase | L2LPH3VRMS | L2LPH3VCFactor | L2LPH3TruePwr | L2LPH3RePwr | L2LPH3AppPwr | L2LPH3PwrFactor | L2LPH3PhaseDiff | L2LPH3VPhase | L2NPH1VRMS | L2NPH1VCFactor | L2NPH1TruePwr | L2NPH1RePwr | L2NPH1AppPwr | L2NPH1PwrFactor | L2NPH1PhaseDiff | L2NPH1VPhase | L2NPH2VRMS | L2NPH2VCFactor | L2NPH2TruePwr | L2NPH2RePwr | L2NPH2AppPwr | L2NPH2PwrFactor | L2NPH2PhaseDiff | L2NPH2VPhase | L2NPH3VRMS | L2NPH3VCFactor | L2NPH3TruePwr | L2NPH3RePwr | L2NPH3AppPwr | L2NPH3PwrFactor | L2NPH3PhaseDiff | L2NPH3VPhase | PH1IRMS | PH1IPhase | PH1ICFactor | PH2IRMS | PH2IPhase | PH2ICFactor | PH3IRMS | PH3IPhase | PH3ICFactor | Frequency | L2LPH1F1Mag | L2LPH1F3Mag | L2LPH1THDF | L2LPH1THDR | L2LPH1RMS | L2LPH1IRMS | L2LPH1Status | L2LPH1HarmonicsNumber | L2LPH1Frequency | L2LPH1MagnitudeAbs | L2LPH1MagnitudePct | L2LPH1Phase | L2LPH1Limits | L2LPH1PassFail | L2LPH1Margin | L2LPH2F1Mag | L2LPH2F3Mag | L2LPH2THDF | L2LPH2THDR | L2LPH2RMS | L2LPH2IRMS | L2LPH2Status | L2LPH2HarmonicsNumber | L2LPH2Frequency | L2LPH2MagnitudeAbs | L2LPH2MagnitudePct | L2LPH2Phase | L2LPH2Limits | L2LPH2PassFail | L2LPH2Margin | L2LPH3F1Mag | L2LPH3F3Mag | L2LPH3THDF | L2LPH3THDR | L2LPH3RMS | L2LPH3IRMS | L2LPH3Status | L2LPH3HarmonicsNumber | L2LPH3Frequency | L2LPH3MagnitudeAbs | L2LPH3MagnitudePct | L2LPH3Phase | L2LPH3Limits | L2LPH3PassFail | L2LPH3Margin | L2NPH1F1Mag | L2NPH1F3Mag | L2NPH1THDF | L2NPH1THDR | L2NPH1RMS | L2NPH1IRMS | L2NPH1Status | L2NPH1HarmonicsNumber | L2NPH1Frequency | L2NPH1MagnitudeAbs | L2NPH1MagnitudePct | L2NPH1Phase | L2NPH1Limits | L2NPH1PassFail | L2NPH1Margin | L2NPH2F1Mag | L2NPH2F3Mag | L2NPH2THDF | L2NPH2THDR | L2NPH2RMS | L2NPH2IRMS | L2NPH2Status | L2NPH2HarmonicsNumber | L2NPH2Frequency | L2NPH2MagnitudeAbs | L2NPH2MagnitudePct | L2NPH2Phase | L2NPH2Limits | L2NPH2PassFail | L2NPH2Margin | L2NPH3F1Mag | L2NPH3F3Mag | L2NPH3THDF | L2NPH3THDR | L2NPH3RMS | L2NPH3IRMS | L2NPH3Status | L2NPH3HarmonicsNumber | L2NPH3Frequency | L2NPH3MagnitudeAbs | L2NPH3MagnitudePct | L2NPH3Phase | L2NPH3Limits | L2NPH3PassFail | L2NPH3Margin | ORDER | PH1INPwr | PH1OUTPwr | PH1Efficiency | PH2INPwr | PH2OUTPwr | PH2Efficiency | TotalEfficiency | PH1LRIPRMS | PH1LRIPPK2PK | PH2LRIPRMS | PH2LRIPPK2PK | PH3LRIPRMS | PH3LRIPPK2PK | PH1SWRIPRMS | PH1SWRIPPK2PK | PH2SWRIPRMS | PH2SWRIPPK2PK | PH3SWRIPRMS | PH3SWRIPPK2PK | TruePwrSum | RePwrSum | AppPwrSum | InPwrSum | OutPwrSum | SPEED | ACCELERATION | DIRECTION | ANGLE | TORQUE | POWER | ELECPWR | MECHPWR | SYSTEMEFFICIENCY | EON | EOFF | TDON | TDOFF | startlevel | stoplevel | TRR | QRR | TA | TB | RSF | VPEAK | IPEAK | TR | ERR | TF | TON | TOFF | IRRM | DBYDT | fft | tiespectra | subspectra | beforetie | beforepj | beforeeyeheight | beforeeyewidth | reconst | aftertie | afterpj | aftereyeheight | aftereyewidth | freq | qoss | PH1TDD | PH2TDD | PH3TDD | TDT | zmean | cmean | lmean | overshootId1 | overshootId2 | deltaIdovershoot | undershootId1 | undershootId2 | deltaIdundershoot | overshootVds1 | overshootVds2 | deltaVdsovershoot | undershootVds1 | undershootVds2 | deltaVdsundershoot | dampFactor1 | dampFactor2 | deltaDampFactor | wfm1PeakdeltaTime | wfm2PeakdeltaTime | ampValueAtCross | timeValueAtCross | Measurement name specified as a string. |
real - The mean value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:MEAN? "RAIL1DPMOVERSHOO returns the mean value of measurement RAIL1DPMOVERSHOOT, for the current acquisition.
Returns the minimum value of the specified measurement for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement whose current-acquisition minimum value is returned. |
real - The minimum value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:MINimum? "OUTPUT7" returns the minimum value of measurement OUTPUT7, for the current acquisition.
This query returns the peak-to-peak value of the measurement specified by the string, for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement path and filename in quotes. |
real - Peak-to-peak value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:PK2PK? "OUTPUT4" returns the peak-to-peak value of measurement OUTPUT4, for the current acquisition.
Returns the population value of the specified measurement for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement whose population value is returned. |
real - Population value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:POPUlation? "RAIL1DPMUN
Returns the standard deviation value of the measurement specified by the string, for the current acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | enum | INPUT | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | RAIL1DPMOVERSHOOT | RAIL1DPMUNDERSHOOT | RAIL1FREQUENCY | RAIL1PK2PK | RAIL1RMS | RAIL1RMSFULL | RAIL2FREQUENCY | RAIL2PK2PK | RAIL2RMS | RAIL2RMSFULL | RAIL3FREQUENCY | RAIL3PK2PK | RAIL3RMS | RAIL3RMSFULL | RAIL4FREQUENCY | RAIL4PK2PK | RAIL4RMS | RAIL4RMSFULL | RAIL5FREQUENCY | RAIL5PK2PK | RAIL5RMS | RAIL5RMSFULL | RAIL6FREQUENCY | RAIL6PK2PK | RAIL6RMS | RAIL6RMSFULL | RAIL7DPMOVERSHOOT | RAIL7DPMUNDERSHOOT | RAIL7FREQUENCY | RAIL7PK2PK | RAIL7RMS | RAIL7RMSFULL | Specifies the measurement name for which the standard deviation is returned. |
real - The standard deviation value of the specified measurement for the current acquisition.
MEASUrement:MEAS1:SUBGROUP:RESUlts:CURRentacq:STDDev? "RAIL7PK2PK"
:MEASUrement:MEAS<x>:SUNitsset / query
Sets or queries the speed measurement units for measurement x. The allowed units are RPM or HZ.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| units | enum | RPM | HZ | Sets the speed measurement units. |
string - Returns the current speed measurement units for measurement x.
MEASUrement:MEAS1:SUNits HZ sets the speed measurement units as HZ. MEASUrement:MEAS1:SUNits? might return MEASUrement:MEAS1:SUNits HZ, indicating thatthe speed measurement units is HZ.
:MEASUrement:MEAS<x>:TBERset / query
Sets or queries the TBER value for the measurement. Measurements are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | TBER value for the measurement as a quoted string. |
string - Returns the TBER value for the measurement as a quoted string.
MEASUrement:MEAS2:TBER "1.2E-7" MEASUrement:MEAS2:TBER?
:MEASUrement:MEAS<x>:TCKAVGset / query
Sets the average clock period value for the specified measurement. The value is a floating-point number representing the DDR average clock period in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| <NR3> | real | s | Floating point number representing the DDR average clock period. |
MEASurement:MEAS7:TCKAVG 2.5E-9 sets the average clock period value as 3.2 ns for measurement 7. MEASurement:MEAS2:TCKAVG? might return MEASurement:MEAS2:TCKAVG 2.0E-9 indicating that average clock period is set to 2.0 ns for measurement 2.
:MEASUrement:MEAS<x>:TCONstantset / query
Sets or queries the measurement Torque Constant.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | 0 - 100 | Specifies the measurement number. |
| current multiplier value | real | 0 - 100 | Specifies the current multiplier value of the measurement. |
real - Returns the current multiplier value for the specified measurement.
MEASurement:MEAS7:TCONstant 15.2 specifies the current multiplier value for measurement 7 as 15.2. MEASurement:MEAS2:TCONstant? might return MEASurement:MEAS2:TCONstant 15.2, indicating the current multiplier value for measurement 2 is 15.2.
:MEASUrement:MEAS<x>:TDRPresetset / query
Executes the preset for TDR measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | - | - | Specifies the measurement number. |
| state | enum | EXECUTE | Executes the preset for TDR measurement. |
:MEASUrement:MEAS1:TDRPreset EXECUTE executes the preset for TDR measurement.
:MEASUrement:MEAS<x>:TIMINGModeset / query
Sets or queries the Timing mode for the specified DDR measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EACHCLOCKCYCLE | TWOCLOCKCYCLES | Selects whether the DDR Timing Mode uses each clock cycle at a time or two cycles at a time. |
enum - Returns the current Timing mode setting for the specified DDR measurement.
MEASurement:MEAS1:TIMINGMode EACHCLOCKCYCLE MEASurement:MEAS1:TIMINGMode?
:MEASUrement:MEAS<x>:TLEVelset / query
Sets or queries whether histogram center is percentage relative to unit amplitude or an absolute value for eye height measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PERCent | ABSolute | Selects how the histogram center is interpreted. |
enum - Returns the current histogram center mode for the specified measurement.
MEASUrement:MEAS1:TLEVel PERCent MEASUrement:MEAS1:TLEVel?
:MEASUrement:MEAS<x>:TMEThodset / query
Sets or queries the torque method for measurement x. Requires the IMDA-MECH license on MSO 5, 6, and 6B series instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| method | enum | SENSOR | CURRENT | Selects the torque method. |
enum - Returns the torque method for the specified measurement.
MEASurement:MEAS7:TMEthod SENSOR MEASurement:MEAS2:TMEthod?
:MEASUrement:MEAS<x>:TOEdgeset / query
Sets or queries the 'to edge' type for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| mode | enum | SAMEas | OPPositeas | RISe | FALL | BOTH | Selects the edge type for the measurement. |
enum - Returns the current 'to edge' type for the measurement.
MEASUrement:MEAS1:TOEdge FALL MEASUrement:MEAS1:TOEdge?
:MEASUrement:MEAS<x>:TOEDGESEARCHDIRectset / query
Sets or queries the direction used for the To Edge search for measurement <x>. The direction can be forward or backward.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | FORWard | BACKWard | Search direction to the edge. |
enum - Returns the current To Edge search direction for measurement <x>.
MEASUrement:MEAS1:TOEDGESEARCHDIRect FORWARD specifies a forward search to the edge. MEASUrement:MEAS1:TOEDGESEARCHDIRect? might return MEASUREMENT:MEAS1:TOEDGESEARCHDIRECT FORWARD indicating the instrument will search in the forward direction for the to edge.
:MEASUrement:MEAS<x>:TOSYmbol:LOGIC2SOUrceset / query
Sets or queries the DDR digital measurement logic 1 source To Symbol. This command is available only with option 6-DBDDR3 on a 6 Series MSO instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| mode | enum | H | L | X | Sets the logic source 1 To Symbol to H (High), L (Low), or X (Don't care). |
:MEASUrement:MEAS<x>:TOSYmbol:MEASUREATset / query
Sets the ToSymbol MeasureAT value for measurement x. This command is available only on a 6 Series MSO with option 6-DBDDR3.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | Start | Stop | ClockEdge | Sets the ToSymbol MeasureAT selection. |
MEASUrement:MEAS1:ToSYmbol:MEASUREAT Start MEASUrement:MEAS1:ToSYmbol:MEASUREAT?
:MEASUrement:MEAS<x>:TRANSitionset / query
Sets or queries the transition edges flag for the measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Controls whether the measurement is computed on all edges or only following a double transition. |
:MEASUrement:MEAS<x>:TYPeset / query
Sets or queries the measurement type for measurement x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ACCOMMONMODE | ACPR | ACRMS | AMPLITUDE | AREA | BASE | BITAMPLITUDE | BITHIGH | BITLOW | BURSTWIDTH | COMMONMODE | CPOWER | DATARATE | DCD | DDJ | DDRAOS | DDRAOSPERTCK | DDRAOSPERUI | DDRAUS | DDRAUSPERTCK | DDRAUSPERUI | DDRHOLDDIFF | DDRSETUPDIFF | DDRTCHABS | DDRTCHAVERAGE | DDRTCKAVERAGE | DDRTCLABS | DDRTCLAVERAGE | DDRTERRMN | DDRTERRN | DDRTJITCC | DDRTJITDUTY | DDRTJITPER | DDRTPST | DDRTRPRE | DDRTWPRE | DDRVIXAC | DDRTDQSCK | DELAY | DJ | DJDIRAC | DPMOVERSHOOT | DPMPSIJ | DPMUNDERSHOOT | DPMRIPPLE | DPMTURNOFFTIME | DPMTURNONTIME | GPLVRT | GPHVRT | EYEHIGH | EYELOW | FALLSLEWRATE | FALLTIME | FREQUENCY | F2 | F4 | F8 | HIGH | HEIGHT | HEIGHTBER | HIGHTIME | HOLD | IMDAANGLE | IMDADIRECTION | IMDADQ0 | IMDAEFFICIENCY | IMDAHARMONICS | IMDAMECHPWR | IMDAPOWERQUALITY | IMDASPEED | IMDASYSEFF | IMDATORQUE | ISI | JITTERSUMMARY | J2 | J9 | LOW | LOWTIME | MAXIMUM | MEAN | MINIMUM | NDUtY | NPERIOD | NPJ | NOVERSHOOT | NWIDTH | OBW | PATTERNLENGTH | PDUTTY | PERIOD | PHASE | PHASENOISE | PJ | PK2Pk | POVERSHOOT | PWIDTH | QFACTOR | RDSON | RISESLEWRATE | RISETIME | RJ | RJDIRAC | RMS | SJFREQ | SRJ | SSCFREQDEV | SSCMODRATE | SSCSLEWRATE | SETUP | SKEW | TDR | TIE | TIMEOUTSIDELEVEL | TJBER | TNTRATIO | TOP | UNITINTERVAL | VDIFFXOVR | WBGDDT | WBGDIODEDDT | WBGEOFF | WBGEON | WBGERR | WBGIPEAK | WBGIRRM | WBGQOSS | WBGQRR | WBGTDOFF | WBGTDON | WBGTF | WBGTON | WBGTOFF | WBGTR | WBGTRR | WBGTDT | WBGVPEAK | WIDTH | WIDTHBER | Measurement type to set or query for the specified measurement. |
enum - Returns the current measurement type for measurement x.
Sets or queries whether histogram center is percentage relative to unit interval or an absolute value for eye width measurement.
enum - Returns whether histogram center is set as a percentage relative to unit interval or as an absolute value for the measurement.
Sets or returns the wait time for measurement <x>. The wait time is specified as an NR2 value in the range of 1 s to 500 s.
| Name | Type | Values | Description |
|---|---|---|---|
| wait time | real | 1 - 500 | Wait time for measurement <x>. |
real (s) - Returns the wait time of measurement <x> in seconds.
MEASUrement:MEAS1:WAITTime 60 MEASUrement:MEAS3:WAITTime?
Sets or returns the burst count for WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | NR3 | Burst count for the WBG measurement. |
integer - Returns the burst count for the WBG measurement.
MEASUrement:MEAS1:WBG:BCOunt 1000 specifies the burst count as 1000 for WBG measurement 1. MEASUrement:MEAS1:WBG:BCOunt? might return :MEASUrement:MEAS1:WBG:BCOunt 1000 indicating the burst count is 1000 for WBG measurement 1.
Sets or queries the delay for a WBG measurement. The slice shows both a setter form and a query form, but does not document a return value for the query.
| Name | Type | Values | Description |
|---|---|---|---|
| value | enum | ON | OFF | Enables or disables the delay setting. |
MEASUrement:MEAS1:WBG:BDELay 1.0000E-3 specifies the burst delay as 1.0000E-3 for WBG measurement 1. MEASUrement:MEAS<x>:WBG:BDELay? might return :MEASUrement:MEAS1:WBG:BDELay 1.0000E-3 indicating the burst delay is 1.0000E-3 for WBG measurement 1.
Sets or queries the WBG measurement delay. The query returns the current delay value in seconds.
real (s) - Returns the current WBG measurement delay.
Enables or disables generator source one for WBG measurement. Requires option WBG-DPT.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Selects whether generator source one is enabled or disabled. |
enum - Returns whether generator source one is enabled or disabled for the selected measurement.
MEASUrement:MEAS1:WBG:ESONe ON MEASUrement:MEAS1:WBG:ESONe?
Returns the WBG EstWo state for the specified measurement. The example indicates it may return OFF when generator source two is disabled.
enum - Returns the WBG EstWo state for the specified measurement.
Sets or queries the generator address for a WBG measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the generator address for WBG measurements. |
string - Returns the generator address for the specified measurement.
MEASUrement:MEAS2:WBG:GENAddress "134.64.246.214" MEASUrement:MEAS2:WBG:GENAddress?
Sets or queries the high voltage of the generator for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | integer | - | Specifies the measurement number. |
| GSOurce<x> | integer | - | Specifies the generator source. |
| voltage | real | - | High voltage of the generator for WBG measurements. |
real - Returns the high voltage setting for the specified measurement and generator source.
MEASUrement:MEAS2:WBG:GSOurce1:HIGH 2.5000 MEASUrement:MEAS2:WBG:GSOurce1:HIGH? might return MEASUREMENT:MEAS2:WBG:GSOurce1:HIGH 2.5000
Sets or queries the load type of the generator for WBG measurements.
enum - Returns the load type of the generator for WBG measurements.
MEASUrement:MEAS2:WBG:GSOurce1:LOAD FIFTY MEASUrement:MEAS2:WBG:GSOurce1:LOAD?
Sets or queries the low voltage of the generator for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| low voltage | real | - | Low voltage for WBG measurements. |
real - Returns the low voltage for WBG measurements.
MEASUrement:MEAS2:WBG:GSOurce1:LOW 0.0E+0 MEASUrement:MEAS2:WBG:GSOurce1:LOW?
Sets or queries the pulse gap of the generator for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement number | integer | 1 - 8 | Specifies the measurement number. |
| generator source | integer | - | Specifies the generator source. |
| pulse number | integer | 1 - 8 | Specifies the number of pulse. |
| value | real | - | Specifies the pulse gap for WBG measurements. |
real - Returns the pulse gap for WBG measurements.
MEASUrement:MEAS2:WBG:GSOurce1:PG8Val 150.0000E-6 MEASUrement:MEAS2:WBG:GSOurce1:PG8Val?
Sets or queries the pulse width of the generator for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| GSOurce<x> | - | - | Specifies the generator source. |
| PG<x> | integer | 1 - 8 | Specifies the number of pulse. |
| pulse gap | real | - | Specifies the pulse gap for WBG measurements. |
real - Returns the pulse width value for WBG measurements.
MEASUrement:MEAS2:WBG:GSOurce1:PW1Val 60.0000E-9 MEASUrement:MEAS2:WBG:GSOurce1:PW1Val?
Sets or returns the generator type for WBG measurements.
enum - Returns the generator type for the selected WBG measurement.
MEASUrement:MEAS1:WBG:GTYPe AFG31000 MEASUrement:MEAS1:WBG:GTYPe?
Sets or returns the number of pulse of AFG for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| NR1 | integer | - | Specifies the number of pulse of AFG to generate pulse signal for WBG measurements. |
integer - Returns the number of pulse of AFG for the specified WBG measurement.
MEASUrement:MEAS2:WBG:NPULs? might return MEASUREMENT:MEAS2:WBG:NPULs 8 indicating the number of pulse of AFG is 8 for measurement 2.
Sets or returns the trigger interval of AFG for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | Specifies the measurement number. |
| pulse gap | real | - | Specifies the pulse gap of AFG for WBG measurements. |
real - Returns the trigger interval of AFG for WBG measurements.
MEASUrement:MEAS2:WBG:TIMer 500.0000 MEASUrement:MEAS2:WBG:TIMer?
Sets or queries the width for the specified measurement number. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| value | real | - | Value for the width. |
real - Returns the width setting for the specified measurement.
MEASUrement:MEAS1:WIDTh 10 sets the width as 10% for measurement 1. MEASUrement:MEAS1:WIDTh? might return MEASUrement:MEAS1:WIDTh 10, indicating width is set to 10% for measurement 1.
Sets or queries the window length for the specified measurement. The measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the measurement number. |
| window length | real | - | The value for the window length. |
MEASUrement:MEAS1:WINDOWLENgth 10 sets the window length to 10. MEASUrement:MEAS1:WINDOWLENgth? might return MEASUREMENT:MEAS1:WINDOWLENGTH 10.0000 indicating the window length is 10.
Sets or queries the global range maximum value.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Maximum measurement range limit value. |
real - Returns the maximum range limit value.
MEASUREMENT:MEASRANGE:MAX 1.5 sets the maximum range limit to 1.5 V. MEASUREMENT:MEASRANGE:MAX? might return MEASUREMENT:MEASRANGE:MAX 1.0000 indicating that the maximum range limit is 1.0 V.
Sets or queries the global range minimum value for measurements.
Sets or queries the global range state for measurements. When enabled, measurement results are limited to values between the range minimum and maximum.
enum - Returns the current global range state.
MEASUREMENT:MEASRANGE:STATE? might return MEASUREMENT:MEASRANGE:STATE 0 indicating that the measurement results are not limited.
Sets or queries the global mechanical Index Z source.
enum - Returns the global mechanical Index Z source state.
MEASUrement:MECH:EINDexz ON
Sets or queries the measurement gear ratio. The gear ratio value is used for a specified measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0.001 - 1000 | Gear ratio value for a specified measurement. |
real - Returns the current measurement gear ratio value.
MEASUREMENT:MECH:GRATIO? might return MEASUREMENT:MECH:GRATio 1.000E-3, indicating the gear ratio value is 1.000E-3.
Sets or queries the global mechanical measurement results units.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | NM | OZINCH | FTLB | INCHLB | DEGREES | RADIANS | Specifies the results units of mechanical torque measurement. |
enum - Returns the current global mechanical measurement results units.
MEASUrement:MECH:MUNits NM specifies the results units of mechanical Torque measurement as NM.
Sets or queries the measurement number of pole pairs.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - 20 | Defines the number of pole pairs for the specified measurement. |
integer - Returns the number of pole pairs for the specified measurement.
MEASUrement:MECH:PPAirs 4 defines the number of pole pairs as 4. MEASUrement:MECH:PPAirs? might return MEASUREMENT:MECH:PPAirs 4 indicating the number of pole pairs is 4.
Sets or queries the global pulses per rotation of the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| pulses per rotation | integer | 1 - 100000 | Defines the pulses per rotation of the measurement. |
integer - Returns the current pulses per rotation of the measurement.
MEASUrement:MECH:PPRotation 25 defines the pulses per rotation of the measurement as 25. MEASUrement:MECH:PPRotation? might return MEASUREMENT:MECH:PPRotation 25, indicating the pulses per rotation of the measurement is 25.
Sets or queries the global mechanical source waveform for the specified source index. The source can be an analog channel, math waveform, reference waveform, or digital channel.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Source index used in the MECH source mnemonic. |
| source | enum | CH<x> | MATH<x> | REF<x> | CH<x>_D<x> | Waveform source to assign. |
string - Returns the current global mechanical source setting.
MEASUrement:MECH:SOUrce2 CH2 MEASUrement:MECH:SOUrce2?
Sets or queries the measurement sensor type.
enum - Returns the current measurement sensor type.
MEASUrement:MECH:STYPe HSENSOR MEASUrement:MECH:STYPe?
:MEASUrement:MINUI?query
Sets or queries the minimum number of unit intervals required for BUJ analysis.
real - Returns the minimum number of unit intervals required for BUJ analysis.
MEASUREMENT:MINUI 1.0000E+6 MEASUREMENT:MINUI?
Sets or queries the global population limit state for the measurement.
enum - Returns the current population limit state.
MEASUREMENT:POPULATION:LIMIT:STATE 1 turns on the population limit. MEASUREMENT:POPULATION:LIMIT:STATE? might return MEASUREMENT:POPULATION:LIMIT:STATE 0 indicating the population limit is off.
Returns the current population limit value.
integer - The current limit value.
Sets or queries the value used as the high reference level of the falling edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | V | The high reference level of the falling edge when the measurement's ref level method is set to absolute. |
real (V) - Returns the high reference level of the falling edge when the measurement's ref level method is set to absolute.
MEASUrement:REFLevels:ABSolute:FALLHigh 1.5 MEASUrement:REFLevels:ABSolute:FALLHigh?
Sets or queries the value used as the low reference level of the falling edge when the measurement ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | V | The value used as the low reference level of the falling edge. |
real (V) - Returns the low reference level of the falling edge when the measurement ref level method is set to absolute.
MEASUrement:REFLevels:ABSolute:FALLLow -1.5 sets the low reference level to -1.5 V. MEASUrement:REFLevels:ABSolute:FALLLow? might return MEASUREMENT:REFLEVELS:ABSOLUTE:FALLLOW -1.0000 indicating the low reference level is -1.0 V.
Sets or queries the value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | The mid reference level of the falling edge. |
string - Returns the current setting as the command name followed by the mid reference level value.
MEASUrement:REFLevels:ABSolute:FALLMid 10.0E-3 MEASUrement:REFLevels:ABSolute:FALLMid?
Sets or queries the hysteresis of the reference level when the measurement's ref level method is set to absolute.
real (V) - Returns the hysteresis of the reference level.
Sets or queries the value used as the high reference level of the rising edge when the measurement ref level method is set to absolute.
real (V) - Returns the high reference level of the rising edge in volts.
MEASUrement:REFLevels:ABSolute:RISEHigh 1.5 sets the high reference to 1.5 V. MEASUrement:REFLevels:ABSolute:RISEHigh? might return MEASUREMENT:REFLEVELS:ABSOLUTE:RISEHIGH 1.0000 indicating the high reference is 1.0 V.
Sets or queries the low reference level of the rising edge when the measurement reference level method is set to absolute.
real (V) - Returns the low reference level of the rising edge.
MEASUrement:REFLevels:ABSolute:RISELow -1.5 sets the high reference to 1.5 V. MEASUrement:REFLevels:ABSolute:RISELow? might return MEASUREMENT:REFLEVELS:ABSOLUTE:RISELow -1.0000 indicating the high reference is -1.0 V.
Sets or queries the value used as the mid reference level of the rising edge when the measurement ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The mid reference level of the rising edge. |
real - Returns the mid reference level of the rising edge.
MEASUrement:REFLevels:ABSolute:RISEMid 10.0E-3 sets the mid reference to 10.0 mV. MEASUrement:REFLevels:ABSolute:RISEMid? might return MEASUREMENT:REFLEVELS:ABSOLUTE:RISEMID 0.0E+0 indicating the mid reference is 0.0 V.
Sets or queries the reference level type for the measurement.
enum - Returns the reference level type.
MEASUrement:REFLevels:ABSolute:TYPE? might return MEASUREMENT:REFLEVELS:ABSOLUTE:TYPE SAME indicating the absolute levels are set the same.
Sets or queries the method used to calculate the TOP and BASE used for measurement reference levels.
enum - Returns the current base/top calculation method.
:MEASUrement:REFLevels:JITTERMODEset / query
Sets or queries how often reference levels are calculated for measurements. The command selects whether reference levels are updated on every acquisition or only after the first acquisition following a statistics reset.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LATCh | CONTinuous | How often reference levels are calculated. |
enum - Returns the current reference-level calculation mode.
Sets or queries how often reference levels are calculated. CONTinuous calculates reference levels on every acquisition, while LATCh calculates them only on the first acquisition after a statistics reset.
enum - Returns the current jitter mode as a keyword indicating when reference levels are calculated.
MEASUREMENT:REFLEVELS:JITTERMODE CONTINUOUS MEASUREMENT:REFLEVELS:JITTERMODE?
:MEASUrement:REFLevels:METHodset / query
Sets or queries the method used to calculate reference levels for the measurement. Percent calculates levels relative to HIGH and LOW; Absolute sets them explicitly using the REFLevel:ABSolute commands.
enum - Returns the current reference-level calculation method.
MEASUrement:REFLevels:METHod ABSOLUTE MEASUrement:REFLevels:METHod?
Sets or queries the method used to calculate reference levels for the measurement.
enum - Returns the current reference-level calculation method.
MEASUrement:REFLevels:METHod ABSOLUTE MEASUrement:REFLevels:METHod?
:MEASUrement:REFLevels:MODEset / query
Sets or queries how often reference levels are calculated.
Sets or queries how often reference levels are calculated.
enum - Returns the current reference-level calculation mode.
:MEASUrement:REFLevels:PERCent:FALLHighset / query
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. The percentage is defined such that 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | 1 - 99 | Percentage used to calculate the high reference level of the falling edge. |
real (%) - Returns the current percentage used to calculate the high reference level of the falling edge.
MEASUrement:REFLevels:PERCent:FALLHigh 90 MEASUrement:REFLevels:PERCent:FALLHigh? might return MEASUREMENT:REFLEVELS:PERCENT:FALLHIGH 80.0000
Sets or queries the percentage used to calculate the high reference level of the falling edge when the measurement ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | % | Percentage used to calculate the high reference level of the falling edge. |
real (%) - Returns the percentage used to calculate the high reference level of the falling edge.
MEASUrement:REFLevels:PERCent:FALLHigh 90 MEASUrement:REFLevels:PERCent:FALLHigh?
:MEASUrement:REFLevels:PERCent:FALLLowset / query
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percent | real | 1 - 99 | Percentage used to calculate the mid reference level of the falling edge. |
real (%) - Returns the current percentage used for the falling-edge low reference level.
MEASUrement:REFLevels:PERCent:FALLLow 10 sets the low reference level to 10%. MEASUrement:REFLevels:PERCent:FALLLow? might return MEASUREMENT:REFLEVELS:PERCENT:FALLLOW 20.0000 indicating the low reference level is 20%.
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | % | Percentage used to calculate the mid reference level of the falling edge. |
real (%) - Returns the current percentage used to calculate the mid reference level of the falling edge.
MEASUrement:REFLevels:PERCent:FALLLow 10 sets the low reference level to 10%. MEASUrement:REFLevels:PERCent:FALLLow? might return MEASUREMENT:REFLEVELS:PERCENT:FALLLOW 20.0000 indicating the low reference level is 20%.
:MEASUrement:REFLevels:PERCent:FALLMidset / query
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | % | Percentage used to calculate the mid reference level of the falling edge. |
real (%) - Returns the current mid reference level percentage for the falling edge.
MEASUrement:REFLevels:PERCent:FALLMid 55 MEASUrement:REFLevels:PERCent:FALLMid? might return MEASUREMENT:REFLEVELS:PERCENT:FALLMID 50.0000
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement's ref level method is set to percent. The manual notes that 99% equals TOP and 1% equals BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | % | Percentage used to calculate the mid reference level of the falling edge. |
real (%) - Returns the mid reference level percentage.
MEASUrement:REFLevels:PERCent:FALLMid 55 MEASUrement:REFLevels:PERCent:FALLMid?
:MEASUrement:REFLevels:PERCent:HYSTeresisset / query
Sets or queries the percentage used to calculate the hysteresis of the reference level when the measurement's ref level method is set to percent. 100% is equal to MAX and 1% is equal to MIN.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | 1 - 100 | Percentage used to calculate the hysteresis of the reference level. |
Sets or queries the percentage used to calculate the hysteresis of the reference level when the measurement's ref level method is set to percent. 100% is equal to MAX and 1% is equal to MIN.
real (%) - Returns the hysteresis percentage.
:MEASUrement:REFLevels:PERCent:RISEHighset / query
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement's ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| nr3 | real | % | Percentage used to calculate the high reference level of the rising edge. |
real (%) - Returns the current high reference level percentage.
MEASUrement:REFLevels:PERCent:RISEHigh 90 sets the high reference level to 90%. MEASUrement:REFLevels:PERCent:RISEHigh? might return MEASUREMENT:REFLEVELS:PERCENT:RISEHIGH 80.0000 indicating the high ref level is 80%.
Returns or sets the percentage used to calculate the high reference level of the rising edge when the measurement ref level method is set to percent.
real (%) - Returns the high reference level percentage for the rising edge.
MEASUrement:REFLevels:PERCent:RISEHigh 90 sets the high reference level to 90%. MEASUrement:REFLevels:PERCent:RISEHigh? might return MEASUREMENT:REFLEVELS:PERCENT:RISEHIGH 80.0000 indicating the high ref level is 80%.
:MEASUrement:REFLevels:PERCent:RISELowset / query
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement's ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | 1 - 99 | The percentage used to calculate the low reference level of the rising edge. |
real (%) - Returns the low reference level percentage.
MEASUrement:REFLevels:PERCent:RISELow 10 sets the low reference level to 10%. MEASUrement:REFLevels:PERCent:RISELow? might return MEASUREMENT:REFLEVELS:PERCENT:RISELOW 20.0000 indicating the low reference level is 20%.
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | % | Percentage used to calculate the low reference level of the rising edge. |
real (%) - Returns the low reference level percentage.
MEASUrement:REFLevels:PERCent:RISELow 10 sets the low reference level to 10%. MEASUrement:REFLevels:PERCent:RISELow? might return MEASUREMENT:REFLEVELS:PERCENT:RISELOW 20.0000 indicating the low reference level is 20%.
Sets or queries the value used as the high reference level of the falling edge when the measurement's ref level method is set to absolute.
Sets or queries the value used as the high reference level of the falling edge when the measurement reference level method is set to absolute.
returns
:MEASUrement:REFLevels:PERCent:RISEMidset / query
Sets or queries the value used as the high reference level of the falling edge when the measurement's reference level method is set to absolute.
Sets or queries the value used as the high reference level of the rising edge when the measurement's reference level method is set to absolute.
:MEASUrement:REFLevels:PERCent:TYPEset / query
Sets or queries the reference level percent type for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | TENNinety | TWENtyeighty | CUSTom | Selects the reference level percent type. |
enum - Returns the current reference level percent type.
MEASUrement:REFLevels:PERCent:TYPE TENNINETY MEASUrement:REFLevels:PERCent:TYPE? might return MEASUREMENT:REFLEVELS:PERCENT:TYPE CUSTOM
Sets or queries the reference level percent type for the measurement.
enum - Returns the current reference level percent type.
MEASUrement:REFLevels:PERCent:TYPE TENNINETY MEASUrement:REFLevels:PERCent:TYPE? might return MEASUREMENT:REFLEVELS:PERCENT:TYPE CUSTOM
:MEASUrement:REFLevels:TYPEset / query
Sets or queries the shared reference level method used for sources of measurement calculations.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | GLOBal | PERSource | Selects whether reference levels are shared across measurements or used on individual measurements. |
enum - Returns the current shared reference level method.
MEASUREMENT:REFLEVELS:TYPE PERSource causes reference levels to be used on individual measurements. MEASUREMENT:REFLEVELS:TYPE? might return MEASUREMENT:REFLEVELS:TYPE GLOBAL indicating reference levels are shared across measurements.
Sets or queries the shared reference level method used for sources of measurement calculations.
enum - Returns the current shared reference level method.
MEASUREMENT:REFLEVELS:TYPE PERSource causes reference levels to be used on individual measurements. MEASUREMENT:REFLEVELS:TYPE? might return MEASUREMENT:REFLEVELS:TYPE GLOBAL indicating reference levels are shared across measurements.
Sets or queries the low reference level used for the falling edge when the measurement ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V | The value used as the low reference level of the falling edge when the measurement's ref level method is set to absolute. |
string (V) - Returns the low reference level value for the falling edge when the measurement ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:FALLLow -1.5 sets the low reference level to -1.5 V. MEASUrement:REF1:REFLevels:ABSolute:FALLLow? might return MEASUREMENT:REF1:REFLEVELS:ABSOLUTE:FALLLOW -1.0000 indicating the low reference level is -1.0 V.
Sets or queries the value used as the low reference level of the falling edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The value used as the low reference level of the falling edge when the measurement's ref level method is set to absolute. |
string - Returns the low reference level of the falling edge when the measurement's ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:FALLLow -1.5 sets the low reference level to -1.5 V. MEASUrement:REF1:REFLevels:ABSolute:FALLLow? might return MEASUREMENT:REF1:REFLEVELS:ABSOLUTE:FALLLOW -1.0000 indicating the low reference level is -1.0 V.
Sets or queries the value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute. |
real - Returns the mid reference level of the falling edge when the measurement's ref level method is set to absolute.
Sets or queries the value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | V | Value used as the mid reference level of the falling edge when the measurement's ref level method is set to absolute. |
real (V) - Returns the mid reference level of the falling edge when the measurement's ref level method is set to absolute.
Sets or queries the value of the hysteresis of the reference level when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | The hysteresis value of the reference level. |
real - Returns the hysteresis value of the reference level when the ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:HYSTeresis 20.0E-3 MEASUrement:REF1:REFLevels:ABSolute:HYSTeresis?
Sets or queries the hysteresis of the reference level when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | - | Value of the hysteresis of the reference level when the measurement's ref level method is set to absolute. |
real - Returns the hysteresis of the reference level when the measurement's ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:HYSTeresis 20.0E-3 MEASUrement:REF1:REFLevels:ABSolute:HYSTeresis?
Sets or queries the value used as the high reference level of the rising edge when the measurement's reference level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The value used as the high reference level of the rising edge when the measurement's ref level method is set to absolute. |
real - Returns the high reference level of the rising edge when queried.
MEASUrement:REF1:REFLevels:ABSolute:RISEHigh 1.5 sets the reference level to 1.5 V. MEASUrement:REF1:REFLevels:ABSolute:RISEHigh? might return MEASUREMENT:REF1:REFLEVELS:ABSOLUTE:RISEHIGH 1.0000 indicating the reference level is 1.0 V.
Sets or queries the value used as the high reference level of the rising edge when the measurement's reference level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The value used as the high reference level of the rising edge when the measurement's ref level method is set to absolute. |
real - Returns the high reference level of the rising edge when the measurement's ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:RISEHigh 1.5 sets the reference level to 1.5 V. MEASUrement:REF1:REFLevels:ABSolute:RISEHigh? might return MEASUREMENT:REF1:REFLEVELS:ABSOLUTE:RISEHIGH 1.0000 indicating the reference level is 1.0 V.
Sets or queries the low reference level of the rising edge for a measurement when the reference level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Value used as the low reference level of the rising edge. |
MEASUrement:REF1:REFLevels:ABSolute:RISELow -1.5 MEASUrement:REF1:REFLevels:ABSolute:RISELow?
Sets or queries the value used as the low reference level of the rising edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Value used as the low reference level of the rising edge when the measurement's ref level method is set to absolute. |
real (V) - Returns the low reference level of the rising edge; the example shows a numeric value in volts.
MEASUrement:REF1:REFLevels:ABSolute:RISELow -1.5 MEASUrement:REF1:REFLevels:ABSolute:RISELow?
Sets or queries the value used as the mid reference level of the rising edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Value used as the mid reference level of the rising edge when the measurement's ref level method is set to absolute. |
MEASUrement:REF1:REFLevels:ABSolute:RISEMid 10.0E-3 MEASUrement:REF1:REFLevels:ABSolute:RISEMid?
Sets or queries the value used as the mid reference level of the rising edge when the measurement's ref level method is set to absolute.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The value used as the mid reference level of the rising edge when the measurement's ref level method is set to absolute. |
real - Returns the value of the mid reference level of the rising edge when the measurement's ref level method is set to absolute.
MEASUrement:REF1:REFLevels:ABSolute:RISEMid 10.0E-3 sets the reference level to 10.0 mV. MEASUrement:REF1:REFLevels:ABSolute:RISEMid? might return MEASUREMENT:REF1:REFLEVELS:ABSOLUTE:RISEMID 0.0E+0 indicating the mid reference level is 0.0 V.
:MEASUrement:REF<x>:REFLevels:ABSolute:TYPEset / query
Sets or queries the reference level type for the measurement. In absolute mode, SAME sets the absolute levels the same and UNIQue allows them to be set independently.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAME | UNIQue | Reference level type for the measurement. |
Sets or queries the reference level type for the measurement. SAME specifies that the absolute levels are set the same, and UNIQue specifies that the absolute levels can be set independently.
enum - Returns the reference level type for the measurement.
:MEASUrement:REF<x>:REFLevels:BASETopset / query
Sets or queries the method used to calculate the TOP and BASE values for reference levels used in measurements.
enum - Returns the current TOP/BASE calculation method.
MEASUrement:REF1:REFLevels:BASETop MINMAX MEASUrement:REF1:REFLevels:BASETop?
Sets or queries the method used to calculate the TOP and BASE values used for reference levels for the measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MINMax | MEANhistogram | MODEhistogram | EYEhistogram | Reference level method to use for TOP and BASE calculation. |
enum - Returns the current TOP and BASE calculation method.
MEASUrement:REF1:REFLevels:BASETop MINMAX MEASUrement:REF1:REFLevels:BASETop?
:MEASUrement:REF<x>:REFLevels:METHodset / query
Sets or queries the method used to calculate reference levels for the measurement. The method determines whether reference levels are defined as percentages relative to HIGH/LOW or as explicit absolute values.
enum - Returns the current reference-level calculation method.
Sets or queries the method used to calculate reference levels for the measurement. Percent uses HIGH/LOW percentages defined by the REFLevel:PERCent commands; Absolute sets explicit reference levels using the REFLevel:ABSolute commands.
enum - Returns the current reference-level calculation method.
Sets or queries the method used to calculate reference levels for the measurement. The percent method calculates levels relative to HIGH and LOW; the absolute method sets levels explicitly.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PERCent | ABSolute | Reference level calculation method. |
Sets or queries the method used to calculate reference levels for the measurement.
Sets or queries the percentage used to calculate the low reference level of the falling edge when the measurement ref level method is set to percent. 99% corresponds to TOP and 1% to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1 - 99 | Percentage used to calculate the low reference level. |
real (%) - Returns the low reference level percentage.
MEASUrement:REF1:REFLevels:PERCent:FALLLow 5 MEASUrement:REF1:REFLevels:PERCent:FALLLow? might return MEASUREMENT:REF1:REFLEVELS:PERCENT:FALLLOW 10.0000
Sets or queries the percentage used to calculate the low reference level of the falling edge when the measurement ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Percentage used to calculate the low reference level. |
real (%) - Returns the percentage set for the low reference level of the falling edge.
MEASUrement:REF1:REFLevels:PERCent:FALLLow 5 MEASUrement:REF1:REFLevels:PERCent:FALLLow?
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement reference level method is set to percent. The percentage is defined with 99% equal to TOP and 1% equal to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Percentage used to calculate the mid reference level of the falling edge. |
real - Returns the percentage used to calculate the mid reference level of the falling edge.
Sets or queries the percentage used to calculate the mid reference level of the falling edge when the measurement's ref level method is set to percent. The percentage is defined relative to TOP and BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | - | Percentage used to calculate the mid reference level of the falling edge. |
real - Returns the percentage used to calculate the mid reference level of the falling edge.
Sets or queries the percentage used to calculate the hysteresis of the reference level when the measurement ref level method is set to percent. The manual notes that 99% is equal to MAX and 1% is equal to MIN.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | 1 - 99 | Percentage used to calculate the hysteresis of the reference level. |
MEASUrement:REF1:REFLevels:PERCent:HYSTeresis 2 sets the hysteresis to 2%. MEASUrement:REF1:REFLevels:PERCent:HYSTeresis? might return MEASUREMENT:REF1:REFLEVELS:PERCENT:HYSTERESIS 5.0000 indicating the hysteresis is 5%.
Sets or queries the percentage used to calculate the hysteresis of the reference level when the measurement's ref level method is set to percent. The manual notes that 99% is equal to MAX and 1% is equal to MIN.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1 - 99 | Percentage used to calculate the hysteresis of the reference level. |
real (%) - Returns the hysteresis percentage.
MEASUrement:REF1:REFLevels:PERCent:HYSTeresis 2 sets the hysteresis to 2%. MEASUrement:REF1:REFLevels:PERCent:HYSTeresis? might return MEASUREMENT:REF1:REFLEVELS:PERCENT:HYSTERESIS 5.0000 indicating the hysteresis is 5%.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement's ref level method is set to percent. 99% corresponds to TOP and 1% to BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1 - 99 | Percentage used to calculate the high reference level of the rising edge. |
real (%) - Returns the high reference level percentage.
MEASUrement:REF1:REFLevels:PERCent:RISEHigh 95 sets the reference level to 95%.
Sets or queries the percentage used to calculate the high reference level of the rising edge when the measurement's ref level method is set to percent. 99% is equal to TOP and 1% is equal to BASE.
real (%) - Returns the percentage used to calculate the high reference level of the rising edge.
MEASUrement:REF1:REFLevels:PERCent:RISEHigh 95 sets the reference level to 95%.
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement's ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | % | The percentage used to calculate the low reference level of the rising edge. |
MEASUment:REF1:REFLevels:PERCent:RISELow 5 MEASUment:REF1:REFLevels:PERCent:RISELow?
Sets or queries the percentage used to calculate the low reference level of the rising edge when the measurement's ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| percentage | real | 1 - 99 | Percentage used to calculate the low reference level of the rising edge. |
real (%) - Returns the low reference level percentage.
MEASUrement:REF1:REFLevels:PERCent:RISELow 5 MEASUrement:REF1:REFLevels:PERCent:RISELow? might return MEASUREMENT:REF1:REFLEVELS:PERCENT:RISELOW 10.0000 indicating the reference level is 10%.
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement's ref level method is set to percent.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The percentage used to calculate the mid reference level of the rising edge. |
MEASUrement:REF1:REFLevels:PERCent:RISEMid 55 MEASUrement:REF1:REFLevels:PERCent:RISEMid?
Sets or queries the percentage used to calculate the mid reference level of the rising edge when the measurement ref level method is set to percent.
real (%) - Returns the percentage used to calculate the mid reference level of the rising edge.
MEASUrement:REF1:REFLevels:PERCent:RISEMid 55 MEASUrement:REF1:REFLevels:PERCent:RISEMid? might return MEASUREMENT:REF1:REFLEVELS:PERCENT:RISEMID 50.0000 indicating the mid reference level is 50%.
:MEASUrement:REF<x>:REFLevels:PERCent:TYPEset / query
Sets or queries the reference level percent type for the measurement.
Sets or queries the reference level percent type for the measurement.
:MEASUrement:RESUlts:HISTory:STARtset / query
Sets or queries the starting acquisition number for transferring measurement history results.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - the number of history acquisitions | The first acquisition that will be transferred. |
MEASUrement:RESUlts:HISTory:STARt 25 MEASUrement:RESUlts:HISTory:STARt? might return MEASUrement:RESUlts:HISTory:STARt 10 indicating that measurement history results transfer will begin at acquisition 10.
Sets or queries the starting acquisition number for transferring measurement history results.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 | The first acquisition that will be transferred. |
integer - Returns the starting acquisition number for measurement history results transfer.
MEASUrement:RESUlts:HISTory:STARt 25 MEASUrement:RESUlts:HISTory:STARt?
:MEASUrement:RESUlts:HISTory:STOPset / query
Sets or queries the last history acquisition that will be transferred. A value of 0 indicates that the stop position is the last history acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 - number of history acquisitions | Last acquisition to transfer. |
string - Returns the current stop setting for history transfer.
MEASUrement:RESUlts:HISTory:STOP 50 MEASUrement:RESUlts:HISTory:STOP?
Returns the last history acquisition transferred by measurement history results. A special value of 0 indicates that the stop position is always the last history acquisition.
integer - Returns the last acquisition that will be transferred, from MEASUrement:RESUlts:HISTory:STARt to the stop position. A return of 0 indicates that the stop position is always the last history acquisition.
MEASUrement:RESUlts:HISTory:STOP? might return MEASUrement:RESUlts:HISTory:STOP 0 indicating that measurement history results transfer will end with the last history acquisition.
:MEASUrement:STATIstics:CYCLEModeset / query
Turns cycle-to-cycle measurement statistics tracking on or off. It affects computation and display of cycle-cycle statistics in the Measurement Result table after enabling and after new data is acquired and measured.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | ON | 0 | 1 | Turns cycle-to-cycle measurement statistics tracking on or off. |
enum - Returns the current cycle-to-cycle measurement statistics tracking setting.
MEASUREMENT:STATISTICS:CYCLEMODE OFF turns off statistics for all measurements.
Turns cycle-to-cycle measurement statistics tracking on or off. It affects computation and display of cycle-cycle statistics in the Measurement Result table after enabling and after new data is acquired.
enum - Returns the current cycle statistics tracking state.
MEASUREMENT:STATISTICS:CYCLEMODE OFF turns off statistics for all measurements.
:MEASUrement:WBG:PDEViceset / query
Sets or returns the type of the Power device used for WBG measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| device type | enum | IGBT | MOSFET | Specifies the type of the Power device. |
enum - Returns the current Power device type.
MEASUREMENT:WBG:PDEVICE MOSFET MEASUREMENT:WBG:PDEVICE?
Sets or returns the type of the Power device used for wide-bandgap measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| device type | enum | IGBT | MOSFET | Specifies the type of the Power device. |
enum - Returns the current Power device type.
MEASUREMENT:WBG:PDEVICE MOSFET MEASUREMENT:WBG:PDEVICE?
:MEASUrement:MEAS<x>:RESUltsset / query
Returns measurement results for the specified measurement slot. This command supports Operation Complete when used in single sequence acquisition mode or during waveform recall.
:MEASUREMENT:GATINGset / query
Sets the measurement gating mode. The factory default is SCREEN.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SCREEN | Measurement gating mode. |
:MEASUREMENT:IMMED:DELAY:DIRECTIONset / query
Sets the direction used for immediate measurement delay calculations. The factory default is FORWARDS.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | FORWARDS | Direction setting for immediate measurement delay. |
:MEASUREMENT:IMMED:DELAY:EDGE1set / query
Sets the edge selection used for the immediate measurement delay. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISE | Edge selection for the delay measurement. |
:MEASUREMENT:IMMED:SOURCE1set / query
Sets the first immediate measurement source. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source1 | enum | CH1 | Measurement source 1. |
:MEASUREMENT:IMMED:TYPEset / query
Sets the immediate measurement type. The factory default is PERIOD.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | PERIOD | Immediate measurement type. |
:MEASUREMENT:INDICATORS:STATEset / query
Sets the measurement indicators state. Factory default is OFF.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | Turns measurement indicators off. |
:MEASUREMENT:MEAS1:DELAY:DIRECTIONset / query
Sets the delay direction used by measurement 1. The factory default is FORWARDS.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | FORWARDS | Delay direction for measurement 1. |
:MEASUREMENT:MEAS1:DELAY:EDGE1set / query
Sets the edge selection used for delay measurements for MEAS1. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISE | Edge used for the delay measurement. |
:MEASUREMENT:MEAS1:SOURCE1set / query
Sets the source for measurement 1. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source1 | enum | CH1 | CH2 | Input source for measurement 1. |
:MEASUREMENT:MEAS1:STATEset / query
Sets the state of measurement slot 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables measurement slot 1. |
:MEASUREMENT:MEAS1:TYPEset / query
Selects the measurement type for MEAS1. The factory default is PERIOD.
:MEASUREMENT:METHODset / query
Sets the measurement method to the factory-default value.
:MEASUREMENT:REFLEVEL:ABSOLUTE:HIGHset / query
Sets the absolute high reference level used for measurements. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| high | real | - | Absolute high measurement reference level. |
:MEASUREMENT:REFLEVEL:ABSOLUTE:LOWset / query
Sets the absolute low reference level used for measurements. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| low | real | - | Absolute low reference level for measurements. |
:MEASUREMENT:REFLEVEL:ABSOLUTE:MID1set / query
Sets the absolute mid-level reference default for measurement levels. The factory default value is 0.0E+0.
:MEASUREMENT:REFLEVEL:METHODset / query
Selects how reference levels are defined for measurement thresholds. The factory default is PERCENT.
:MEASUREMENT:REFLEVEL:PERCENT:HIGHset / query
Sets the high percentage reference level used by measurement functions. The factory default value is 90.0000.
:MEASUREMENT:REFLEVEL:PERCENT:LOWset / query
Sets the low percentage reference level used by measurement functions. The factory default is 10.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| low | real | % | Low percentage reference level. |
:MEASUREMENT:REFLEVEL:PERCENT:MID1set / query
Sets the measurement reference level percent mid1 default value. This appears in the factory defaults table with a default of 50.0000.
:MEASUREMENT:STATISTICS:MODEset / query
Sets the measurement statistics mode to the selected state. The factory default is ALL.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ALL | Measurement statistics mode. |
:MEASUREMENT:STATISTICS:WEIGHTINGset / query
Sets the weighting value used by measurement statistics. The factory default is 32.
:DVMset / query
Resets the Digital Voltmeter measurements and history.
:DVM:AUTORangeset / query
Sets or queries the autorange state for the Digital Voltmeter.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Autorange state. |
Returns the current frequency value for the Digital Voltmeter.
real - The current frequency value for the Digital Voltmeter.
Returns the average readout value for the Digital Voltmeter function over the history period.
real - The average DVM readout value over the history period.
Returns the maximum readout value for the DVM function over the history period.
real - The maximum readout value for the DVM function over the history period.
Returns the minimum readout value for the DVM function over the history period.
real - The minimum readout value for the DVM function over the history period.
Returns the maximum DVM readout value over the entire time that the DVM has been on since the last change using the DVM:MODe or DVM:SOUrce commands or DVM RESET.
real - The maximum DVM readout value over the entire time that the DVM has been on since the last change using the DVM:MODe or DVM:SOUrce commands or DVM RESET.
Returns the minimum DVM readout value over the entire time that the DVM has been on since the last change using the DVM:MODe or DVM:SOUrce commands or DVM RESET.
real - The minimum DVM readout value over the entire time that the DVM has been on since the last change using the DVM:MODe or DVM:SOUrce commands or DVM RESET.
Returns the DVM readout value.
returns - Returns the DVM readout value.
:DVM:MODeset / query
Specifies or queries the mode to use for the Digital Voltmeter.
:DVM:SOUrceset / query
Sets or queries the source for the Digital Voltmeter.
:DVM:TRIGger:FREQuency:COUNTerset / query
Sets or queries the state of the trigger frequency counter.
:DVM:AUTORange?query
Sets or queries the Digital Voltmeter autorange state. Autorange is disabled while the DVM source is the same channel as the trigger source.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | Turns DVM autorange on or off. |
enum - Returns the current DVM autorange state.
DVM:AUTOR ON turns on autorange for the Digital Voltmeter.
:DVM:MODe?query
Specifies or queries the mode used for the Digital Voltmeter. The available modes are ACRMS, ACDCRMS, DC, and OFF.
enum - Returns the current DVM mode.
:DVM:SOUrce?query
Sets or queries the source for the DVM.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Specifies which channel to use as the source for the DVM. |
DVM:SOURCE CH4 sets the DVM source to Channel 4.
Returns the state of the trigger frequency counter readout in the trigger badge. The counter is part of the DVM trigger frequency function.
enum - Returns the trigger frequency counter state.
DVM:TRIGGER:FREQUENCY:COUNTER? might return DVM:TRIGGER:FREQUENCY:COUNTER 1 indicating the counter is on.
:DVM:AUTORANGEset / query
Sets the DVM autorange state. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Turns DVM autorange off or on. |
:DVM:DISPLAYSTYLEset / query
Sets the digital voltmeter display style. The factory default is FULL.
:DVM:MODEset / query
Sets the DVM mode. The factory default is OFF.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | DVM mode setting. |
:DVM:SOURCEset / query
Sets the DVM measurement source. The factory default is CH1.
:ETHERnet:DHCPbootpset / query
Specifies the network initialization search for a DHCP/BOOTP server.
:ETHERnet:DNS:IPADDressset / query
Specifies the network Domain Name Server (DNS) IP address.
| Name | Type | Values | Description |
|---|---|---|---|
| IP address | string | - | Network DNS server IP address. |
:ETHERnet:DOMAINnameset / query
Specifies the network domain name.
| Name | Type | Values | Description |
|---|---|---|---|
| domain name | string | - | Network domain name to assign. |
Returns the Ethernet address (MAC address) value assigned to the instrument.
string - The Ethernet address (MAC address) assigned to the instrument.
:ETHERnet:GATEWay:IPADDressset / query
Specifies the network gateway IP address.
| Name | Type | Values | Description |
|---|---|---|---|
| IP address | string | - | Network gateway address. |
:ETHERnet:IPADDressset / query
Specifies the IP address assigned to the instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| ip address | string | - | IP address assigned to the instrument. |
:ETHERnet:LXI:LAN:RESETset / query
Resets the LXI local area network.
:ETHERnet:LXI:LAN:SERVICENAMeset / query
Specifies the mDNS service name used for the LXI interface.
Returns the LXI network status.
enum - Returns the LXI network status.
:ETHERnet:NAMEset / query
Sets or queries the instrument Ethernet hostname assigned to the instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| name | string | - | Hostname assigned to the instrument. |
:ETHERnet:NETWORKCONFigset / query
Specifies the Ethernet network configuration setting.
:ETHERnet:PINGset / query
Causes the instrument to ping the gateway IP address.
:ETHERnet:DHCPbootp?query
Sets the network configuration method to DHCP/BOOTP or static IP. ON enables DHCP searching for a server; OFF disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Selects whether the instrument searches for a DHCP server. |
enum - Returns the current network configuration method as ON for DHCP/BOOTP or OFF for static IP.
ETHERNET:DHCPBOOTP ON
Specifies the DNS IP address the instrument uses to communicate with the network.
string - Returns the DNS IP address value.
ETHERNET:DNS:IPADDRESS "128.196.13.252" sets the DNS IP address that the instrument uses to communicate with the network.
Specifies the network domain name.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The network domain name, enclosed in quotes. |
ETHERNET:DOMAINNAME "Alpha1.Mycorp.com" sets the domain name that the instrument uses to communicate with the network.
This command specifies the network gateway IP address.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The network gateway IP address, enclosed in quotes. |
:ETHERnet:IPADDress?query
Sets or queries the instrument's Ethernet IP address.
string - The instrument's IP address is returned as a standard IP address value, enclosed in quotes.
ETHERNET:IPADDRESS "123.121.13.214"
Queries the LXI mDNS service name used for the LXI interface. The value is a quoted string up to 64 characters.
string - Returns the mDNS service name used for the LXI interface.
ETHERnet:LXI:LAN:SERVICENAMe? might return "Tektronix Oscilloscope MSO5 053CVV".
:ETHERnet:NAME?query
Sets or queries the instrument Ethernet hostname assigned to the instrument.
string - The network name assigned to the instrument, enclosed in quotes.
Specifies the Ethernet network configuration setting. The instrument can be configured automatically from a DHCP server or manually using static network settings.
enum - Returns the current Ethernet network configuration setting.
Returns the results of sending the ETHERnet:PING command to ping the gateway IP address.
enum - OK is returned if the computer at the gateway IP address answers. NORESPOnsE is returned if the computer at the gateway IP address does not answer. TRYING is returned if the ping operation is still executing. NEVER is returned if ETHERnet:PING EXECute has not been previously sent, indicating that no ping response has ever been received in response to an ETHERnet:PING EXECute command since the instrument was powered on.
:ETHERnet:SUBNETMaskset / query
Sets or queries the instrument subnet mask value.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The subnet mask value, enclosed in quotes. |
ETHERNET:SUBNETMASK "255.255.255.0" sets the subnet mask value using standard IP address notation format.
Sets or queries the instrument subnet mask value.
| Name | Type | Values | Description |
|---|---|---|---|
| subnet mask | string | - | Subnet mask value, enclosed in quotes. |
ETHERNET:SUBNETMASK "255.255.255.0" sets the subnet mask value using standard IP address notation format.
:EYEMASK:MASK<x>:SHAPEset / query
Sets or queries the shape of a segment of an eye mask.
Returns the total number of hit violations for all segments in the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | 1 | The number of the specified mask test in an eye diagram plot. |
integer - Total number of hit violations for all segments in the specified mask test.
EYEMASK:MASK2:COUNt:HITS? might return 211, indicating that mask 2 has a total of 211 violations for all segments in the mask.
Returns the number of mask test violations for the specified mask test and mask segment.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | The number of the specified mask test or mask test plot. |
| SEG<y> | integer | - | The number of the mask segment for which to return hit violations data. |
integer - An integer number representing the number of mask test violations for the specified mask test and mask segment.
EYEMASK:MASK1:COUNt:SEG3:HITS? might return 435, indicating that segment 3 of mask test 1 has 435 hit violations.
Returns the name of the eye diagram plot that created the specified mask. This query requires option 5-DJA or 6-DJA (Advanced Jitter Analysis).
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | The number of the specified mask test. |
string - A quoted string containing the name of the eye diagram plot associated with the specified mask.
EYEMASK:MASK4:CREATor? might return "plot2".
:EYEMASK:MASK<x>:CTYPEset / query
Sets the coordinate type for the specified eye mask plot. The query returns whether the coordinate type is Absolute or Relative.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Number of the specified mask plot. |
| mode | enum | ABSolute | RELative | Coordinate type to set. |
enum - Returns the current coordinate type for the specified mask plot.
EYEMASK:MASK4:CTYPE ABS sets the coordinate type to Absolute. EYEMASK:MASK2:CTYPE? might return RELATIVE, indicating that coordinate type is Relative in the specified mask plot.
Returns the coordinate type for the specified mask plot.
enum - Returns the coordinate type for the specified mask plot.
EYEMASK:MASK4:CTYPE ABS sets the coordinate type to Absolute. EYEMASK:MASK2:CTYPE? might return RELATIVE, indicating that coordinate type is Relative in the specified mask plot.
:EYEMASK:MASK<x>:ENAbledset / query
Enables or disables eye mask testing in the specified mask plot.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | The number of the specified mask plot. |
| state | enum | ON | OFF | Enables or disables the eye mask test. |
integer - Returns an integer number representing enabled (1) or disabled (0).
EYEMASK:MASK4:ENAbled ON enables the eye mask test in the specified mask plot. EYEMASK:MASK2:ENAbled? might return 0, indicating that mask testing is disabled in the specified mask plot.
Enables or disables eye mask testing in the specified mask plot.
integer - Returns 1 if enabled and 0 if disabled.
EYEMASK:MASK4:ENAbled ON enables the eye mask test in the specified mask plot. EYEMASK:MASK2:ENAbled? might return 0, indicating that mask testing is disabled in the specified mask plot.
:EYEMASK:MASK<x>:LLIMitset / query
Sets or queries the top bound of the undershoot segment for the specified mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| limit | real | - | Top bound value for the undershoot segment. |
EYEMASK:MASK2:LLIMit -1.5 EYEMASK:MASK5:LLIMit?
Sets or queries the top bound of the undershoot segment for the specified mask number. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| value | real | - | Top bound value for the undershoot segment. |
real - Returns the current top bound value of the undershoot segment for the specified mask number.
EYEMASK:MASK2:LLIMit -1.5 sets the value to -1.5 EYEMASK:MASK5:LLIMit? might return EYEMASK:MASK5:LLIMit -0.8 indicating the value is -0.8.
:EYEMASK:MASK<x>:MASKfileset / query
Sets or queries the current mask definition file name for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask test number. |
| file | string | - | Quoted string that defines the file path of the mask file to use, in the format '[<path>]<filename.ext>'. |
string - Returns the current mask definition file name for the specified mask test.
Sets or queries the current mask definition file name for the specified mask test. The file name is a quoted string path of the form '[<path>]<filename.ext>'; if no path is given, the instrument searches the current working directory.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask test number. |
| file | string | - | Quoted string defining the mask file path to use. |
Returns the mask offset value in the specified mask in seconds. The mask test number is specified by <x>.
real (s) - The mask offset value for the specified mask, in seconds.
EYEMASK:MASK2:MASKOffset:HORizontal:AUTOfit? might return EYEMASK:MASK2:MASKOffset:HORizontal:AUTOfit 12e-12, indicating that mask autofit moved mask 2 by 12 ps
:EYEMASK:MASK<x>:OUENableset / query
Adds or removes the Overshoot and Undershoot segments from an Eye Mask. The mask number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Adds or removes the Overshoot and Undershoot segments. |
Adds or removes the Overshoot and Undershoot segments from an Eye Mask. The mask number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Adds or removes the Overshoot and Undershoot segments. |
enum - Returns the current enable state of the Overshoot and Undershoot segments for the specified mask.
:EYEMASK:MASK<x>:SEG<x>:FLIP:HORizontalset / query
Horizontally flips a specified eye mask segment. This command has no query form.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| SEG<x> | integer | - | Specifies the number of the mask segment. |
EYEMASK:MASK2:SEG2:FLIP:HORizontal flips the segment 2 horizontally.
:EYEMASK:MASK<x>:SEG<x>:FLIP:VERTicalset / query
Vertically flips a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| SEG<x> | integer | - | Specifies the number of the mask segment. |
EYEMASK:MASK2:SEG2:FLIP:HORizontal flips the segment 2 horizontally.
:EYEMASK:MASK<x>:SEG<x>:HEIGhtset / query
Sets or queries the height of a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| height | real | - | Height value for the specified segment. |
real - Returns the height value of the specified segment.
EYEMASK:MASK2:SEG2:HEIGht 100e-3 sets the height to 100E-3. EYEMASK:MASK5:SEG2:HEIGht? might return EYEMASK:MASK5:HEIGht 0.8 indicating the value is 0.8.
Sets or queries the height of a segment of an eye mask. The set form assigns an NR3 height value to the specified mask segment.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask number. |
| SEG<x> | - | - | Specifies the number of the specified mask segment. |
| height | real | - | Height value for the specified segment. |
real - Returns the height of the specified mask segment; the example shows a query returning the command with the height value appended.
EYEMASK:MASK2:SEG2:HEIGht 100e-3 EYEMASK:MASK5:SEG2:HEIGht?
:EYEMASK:MASK<x>:SEG<x>:POINTSset / query
Sets or queries the X/Y coordinates of all points in the designated eye mask segment. The set form defines new points in the mask, replacing any existing points.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
| SEG<x> | - | - | Specifies the mask segment. |
Sets or queries the X/Y coordinates of all points in the designated eye mask segment. The set form defines new points in the mask, replacing any existing points.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
| SEG<x> | - | - | Specifies the mask segment. |
returns
Sets or queries the rotation of a segment of an eye mask. The rotation value is specified in degrees.
| Name | Type | Values | Description |
|---|---|---|---|
| rotation | real | degrees | Rotation value for the specified segment. |
real (degrees) - Returns the rotation value for the specified segment in degrees.
EYEMASK:MASK2:SEG2:ROTA 20 EYEMASK:MASK5:SEG2:ROTA?
:EYEMASK:MASK<x>:SEG<x>:ROTAtionset / query
Sets or queries the rotation of a segment of an eye mask. The rotation value is specified in degrees.
| Name | Type | Values | Description |
|---|---|---|---|
| rotation value | real | degrees | Rotation of the specified segment in degrees. |
real (degrees) - Returns the rotation value of the specified segment in degrees.
EYEMASK:MASK2:SEG2:ROTA 20 EYEMASK:MASK5:SEG2:ROTA?
:EYEMASK:MASK<x>:SEG<y>:SHAPEset / query
Queries or sets the shape of a segment of an eye mask. The shape can be one of four geometric forms.
| Name | Type | Values | Description |
|---|---|---|---|
| shape | enum | TRIAngle | RECTangle | TRAPezoid | HEXAgon | Shape of the specified eye mask segment. |
Queries or sets the shape of a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| shape | enum | TRIAngle | RECTangle | TRAPezoid | HEXAgon | Shape of the specified eye mask segment. |
enum - Returns the current shape of the specified eye mask segment.
:EYEMASK:MASK<x>:SEG<x>:WIDTHset / query
Sets or queries the width of a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask number. |
| SEG<x> | - | - | Specifies the mask segment number. |
| width | real | - | Width value for the specified segment. |
real - Returns the width value for the specified segment.
EYEMASK:MASK2:SEG2:WIDTH 100e-12 sets the width to 100E-12. EYEMASK:MASK5:SEG2:WIDTH? might return EYEMASK:MASK5:WIDTH 0.8 indicating the value is 0.8.
Sets or queries the width of a segment of an eye mask.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask number. |
| SEG<x> | - | - | Specifies the mask segment number. |
| width | real | - | Width value for the specified segment. |
EYEMASK:MASK2:SEG2:WIDTH 100e-12 EYEMASK:MASK5:SEG2:WIDTH?
Sets or queries the center X position of a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask number. |
| SEG<x> | - | - | Specifies the mask segment number. |
| XPOS | real | - | Center X value for the specified mask segment. |
:EYEMASK:MASK<x>:SEG<x>:XPOSitionset / query
Sets or queries the center X position of a segment of an eye mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Mask and segment indices are specified in the command mnemonic as MASK<x>:SEG<x>. |
| xpos | real | - | Center X value for the specified mask segment. |
Sets or queries the center Y value for a specified eye mask segment.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| SEG<x> | integer | - | Specifies the number of the mask segment. |
| <NR3> | real | - | Center Y value for the specified segment. |
EYEMASK:MASK2:SEG2:YPOS 100e-3 sets the center Y to 100E-3. EYEMASK:MASK5:SEG2:YPOS? might return EYEMASK:MASK5:YPOS 0.2 indicating the value is 0.2.
:EYEMASK:MASK<x>:SEG<x>:YPOSitionset / query
Sets or queries the center Y of a specified eye mask segment. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
| SEG<x> | integer | - | Specifies the number of the given mask segment. |
| YPOS | real | - | Center Y value for the specified segment. |
EYEMASK:MASK2:SEG2:YPOS 100e-3 sets the center Y to 100E-3. EYEMASK:MASK5:SEG2:YPOS? might return EYEMASK:MASK5:YPOS 0.2 indicating the value is 0.2.
:EYEMASK:MASK<x>:TESt:SAMple:THResholdset / query
Sets or queries the total number of hit violations that will cause a mask test failure.
Sets or queries the total number of hit violations that will cause a mask test failure.
Returns the mask hit test status for the specified mask test. Valid status strings are PASS, FAIL, and OFF.
string - Returns a string with the mask test status: PASS means the number of mask hits is less than the target fail threshold, FAIL means the number of mask hits is greater than or equal to the target fail threshold, and OFF means mask testing is disabled on the specified mask plot.
EYEMASK:MASK2:TESt:STATUS? might return Fail, indicating that mask testing has failed in the specified mask plot.
:EYEMASK:MASK<x>:ULIMitset / query
Sets or queries the bottom bound value for the overshoot segment of the specified mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask number. |
real - Returns the bottom bound value for the overshoot segment.
EYEMASK:MASK2:ULIMit 1.5 EYEMASK:MASK5:ULIMit?
Queries the bottom bound value for the overshoot segment of a specified mask. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask number. |
real - Returns the bottom bound value for the overshoot segment.
EYEMASK:MASK5:ULIMit? might return EYEMASK:MASK5:ULIMit 0.8 indicating the value is 0.8.
:MATH:MATH<x>:ETHERCATSUPPortedfieldsset / query
Sets or queries the field type for the math for the bus source for ETHERCAT bus.
:MATH:ADDNewset / query
Adds the specified math waveform to the setup.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string specifying the math waveform to add, in the form "MATH<NR1>" where <NR1> is greater than or equal to 1. |
MATH:ADDNEW "MATH2" adds MATH2.
:MATH:DELeteset / query
Deletes the specified math waveform. The waveform name must be a quoted string of the form "MATH<NR1>" with NR1 ≥ 1.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string specifying the math waveform to delete. |
MATH:DELETE "MATH1"
:MATH:LIST?query
Returns a comma separated list of all currently defined math waveforms.
string - Comma separated list of all currently defined math waveforms.
MATH:LIST? Might return MATH:LIST MATH1,MATH4, indicating MATH1 and MATH4 are the currently defined math waveforms.
:MATH:MATH<x>:ARINC429A:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for ARINC429A. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| DATa | enum | DATa | Sets the field type to DATa. |
:MATH:MATH<x>:AUDIO:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for Audio bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math waveform number. |
| field type | enum | LCHannel | RCHannel | TDMChannel | Field type to set for the Audio bus source. |
enum - Returns the current field type for the Audio bus source.
MATH:MATH2:AUDIO:SUPPortedfields LCHannel MATH:MATH2:AUDIO:SUPPortedfields?
:MATH:MATH<x>:AUTOETHERnet:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for AUTOETHERnet. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | IPData | TDATa | Field type to set for the AUTOETHERnet bus source. |
enum - Returns the current field type for the AUTOETHERnet bus source.
MATH:MATH2:AUTOETHERnet:SUPPortedfields DATa MATH:MATH2:AUTOETHERnet:SUPPortedfields?
:MATH:MATH<x>:AVG:MODEset / query
Sets or queries the math average mode flag for the specified math waveform. If the flag is set to 1, math averaging is turned on.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | <NR1> | OFF | ON | Selects average mode on or off; <NR1> = 0 turns it off and any other integer turns it on. |
integer - Returns the average mode flag for the specified math waveform, where 0 indicates off and any other integer indicates on.
MATH:MATH2:AVG:MODE ON sets the average mode on. MATH:MATH1:AVG:MODE? might return MATH:MATH1:AVG:MODE 0, indicating average mode is off.
:MATH:MATH<x>:AVG:WEIGhtset / query
Sets or queries the number of acquisitions at which the averaging algorithm will begin exponential averaging for the selected math waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Number of acquisitions at which the averaging algorithm will begin exponential averaging. |
MATH:MATH2:AVG:WEIGHT 143 sets the number of acquisitions needed to begin averaging to 20. MATH:MATH3:AVG:WEIGHT? might return MATH:MATH3:AVG:WEIGHT 20, indicating the number of acquisitions needed to begin averaging is 8.
:MATH:MATH<x>:CAN:SUPPortedfieldsset / query
Sets or queries the supported field type for the CAN bus source of math waveform x. The only documented field type is DATa.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Field type for the CAN bus source. |
enum - Returns the field type for math waveform x for the CAN bus source.
MATH:MATH2:CAN:SUPPortedfields DATa MATH:MATH2:CAN:SUPPortedfields? might return MATH:MATH2:CAN:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for CAN bus is DATa.
:MATH:MATH<x>:CXPI:SUPPortedfieldsset / query
Sets or queries the field type for the math for the bus source for CXPI bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| DATa | enum | DATa | Sets the field type to DATa. |
MATH:MATH2:CXPI:SUPPortedfields DATa MATH:MATH2:CXPI:SUPPortedfields?
:MATH:MATH<x>:DEFineset / query
Defines a new math waveform using a mathematical expression. The query form returns the math definition for the specified math waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Specifies the math waveform number. |
:MATH:MATH<x>:ESPI:SUPPortedfieldsset / query
Sets or queries the supported field type for the ESPI bus source math waveform specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | CDATa | RDATa | Field type for the math bus source for ESPI bus. |
enum - Returns the current field type for the ESPI bus source math waveform.
MATH:MATH2:ESPI:SUPPortedfields DATa MATH:MATH2:ESPI:SUPPortedfields? might return MATH:MATH2:ESPI:SUPPortedfields DATa
:MATH:MATH<x>:ETHERCAT:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for ETHERCAT bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | SDATa | NWVariabledata | Field type for the ETHERCAT math bus source. |
:MATH:MATH<x>:ETHERnet:SUPPortedfieldsset / query
Sets or queries the field type for the math waveform used as the bus source for ETHERnet bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math waveform number. |
| field type | enum | DATa | IPData | TDATa | Selects the ETHERnet supported field type. |
MATH:MATH2:ETHERnet:SUPPortedfields DATa MATH:MATH2:ETHERnet:SUPPortedfields?
:MATH:MATH<x>:EUSB:SUPPortedfieldsset / query
Sets or queries the field type for the math waveform used as the bus source for EUSB. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DATa | DDATa | Field type to set. |
enum - Returns the field type for the specified math waveform and EUSB bus source.
MATH:MATH2:EUSB:SUPPortedfields DATa sets the field type to DATa.
:MATH:MATH<x>:FILTer:CFReqset / query
Sets or queries the filter cutoff frequency for the specified math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the filter cutoff frequency. |
real - Returns the filter cutoff frequency.
MATH:MATH1:FILTer:CFReq 312.5E+9 MATH:MATH1:FILTer:CFReq?
:MATH:MATH<x>:FILTer:DELayset / query
Sets the delay for the all-pass filter for math waveform x, or queries the current delay. Requires UDFLT licenses on 5, 6 series MSO instruments and Tekscope (Offline).
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | s | Delay for the all-pass filter. |
real (s) - Returns the current delay for the all-pass filter.
MATH:MATH1:FILTer:DELay 200E-6 MATH:MATH1:FILTer:DELay?
:MATH:MATH<x>:FILTer:DESIgnset / query
Performs filter-specific Apply, Abort, and Generate operations for the selected math waveform.
:MATH:MATH<x>:FILTer:HCFReqset / query
Sets or queries the high cutoff frequency for a bandpass or band stop filter. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | - | High cutoff frequency for the bandpass or band stop filter. |
real - Returns the high cutoff frequency for the bandpass or band stop filter.
MATH:MATH1:FILTer:HCFReq 1.25E+9 MATH:MATH1:FILTer:HCFReq?
Returns filter information output when the user creates a filter. The math waveform is specified by x.
string - Returns filter information output when the user creates a filter.
:MATH:MATH<x>:FILTer:LCFReqset / query
Sets or queries the low cutoff frequency for a bandpass or band stop filter for the specified math waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | - | Low cutoff frequency for the bandpass or band stop filter. |
real - Returns the low cutoff frequency for the bandpass or band stop filter.
MATH:MATH1:FILTer:LCFReq 500E+6 MATH:MATH1:FILTer:LCFReq? might return MATH:MATH1:FILTer:LCFReq 500E+6
:MATH:MATH<x>:FILTer:LOADset / query
Loads the filter file for the specified math waveform x. The command takes a file path string; Linux default location is C:\, and Windows default location is C:\Users\Public\Tektronix\TekScope\Filters.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Path to the filter file to load. |
:MATH:MATH<x>:FILTer:LOAD:RESPonseset / query
Loads the filter responses and automatically applies the filter option for the specified math waveform. Requires the UDFLT license on 5/6 Series MSO instruments and Tekscope (Offline).
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math waveform number. |
| state | enum | 1 | 0 | Enables or disables recall of the filter response image. |
MATH:MATH1:FILTer:LOAD:RESPonse 1 MATH:MATH1:FILTer:LOAD:RESPonse?
:MATH:MATH<x>:FILTer:ORDerset / query
Sets or queries the filter order for the specified math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| order | integer | - | Filter order value. |
integer - The filter order.
MATH:MATH1:FILTer:ORDer 2 MATH:MATH1:FILTer:ORDer?
:MATH:MATH<x>:FILTer:PRIPpleset / query
Sets or queries the pass band ripple in the filter response for the specified math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Pass band ripple in the filter response. |
real - Returns the pass band ripple in the filter response.
MATH:MATH1:FILTer:PRIPple 5.0000 MATH:MATH1:FILTer:PRIPple?
:MATH:MATH<x>:FILTer:RESPonseset / query
Loads the filter response and automatically applies the filter option for the selected math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| response | enum | BUTTerworth | CHEBYONe | CHEBYTWo | ELLiptical | GAUSsian | BESSelCUSTom | Specifies the filter response to load. |
MATH:MATH1:FILTer:RESPonse ELLiptical MATH:MATH1:FILTer:RESPonse? might return MATH:MATH1:FILTer:RESPonse ELLiptical, indicating the filter response is ELLiptical.
:MATH:MATH<x>:FILTer:ROFactorset / query
Sets or queries the roll-off factor for a raised cosine or root raised cosine filter. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math waveform. |
| value | real | - | Specifies the roll-off factor value for the Raised-Cosine (RC) filter type. |
real - Returns the roll-off factor value.
MATH:MATH1:FILTer:ROFactor 1 MATH:MATH1:FILTer:ROFactor?
:MATH:MATH<x>:FILTer:SATTenuationset / query
Sets or queries the stop band attenuation in the filter response for the specified math waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| attenuation | real | - | Stop band attenuation in the filter response. |
real - Returns the stop band attenuation in the filter response.
MATH:MATH1:FILTer:SATTenuation 10.0000 MATH:MATH1:FILTer:SATTenuation?
:MATH:MATH<x>:FILTer:SAVeset / query
Saves the created filter in .flt format to the specified save location. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| save location | string | - | Specifies where to save the created filter file. |
MATH:MATH1:FILTer:SAVe "LowPassButterworth" saves the LowPassButterworth.flt filter to the specified save location.
:MATH:MATH<x>:FILTer:SAVe:RESPonseset / query
Sets whether the filter response image is saved when saving the filter file for the selected math waveform. The default is disabled.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Enables or disables saving of the filter response image. |
enum - Returns whether saving of the filter response image is enabled.
MATH:MATH1:FILTer:SAVE:RESPonse 1 MATH:MATH1:FILTer:SAVE:RESPonse? might return MATH:MATH1:FILTer:SAVE:RESPonse 1, indicating the save of the filter response image is enabled.
:MATH:MATH<x>:FILTer:SDEViationset / query
Sets the standard deviation used in the Gaussian filter for the specified math waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Standard deviation for the Gaussian filter. |
:MATH:MATH<x>:FILTer:SDURationset / query
Sets or queries the symbol duration for raised cosine or root raised cosine filter. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| duration | real | - | Specifies the number of symbol duration for Root-Raised-Cosine (RRC) filter type. |
real - Returns the number of symbol duration for Root-Raised-Cosine (RRC) filter type.
MATH:MATH1:FILTer:SDURation 10.0000E-9 MATH:MATH1:FILTer:SDURation?
:MATH:MATH<x>:FILTer:SOURceset / query
Sets or queries the math waveform filter source. The math waveform and source are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the filter source. |
:MATH:MATH<x>:FILTer:SYMBolsset / query
Sets or queries the symbol count for the raised cosine or root raised cosine filter of math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | - | Number of symbols for the Raised-Cosine (RC) filter type. |
real - Returns the number of symbols for the Raised-Cosine (RC) filter type.
MATH:MATH1:FILTer:SYMBols 2 sets the number of symbols for Raised-Cosine (RC) filter type to 2. MATH:MATH1:FILTer:SYMBols? might return MATH:MATH1:FILTer:SYMBols 2, indicating the number of symbols for Raised-Cosine (RC) filter type is 2.
:MATH:MATH<x>:FILTer:TWIDthset / query
Sets or queries the filter Transition Width for the Custom filter response for the specified math waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | - | Transition Width for Custom filter response. |
real - Returns the Transition Width for Custom filter response.
MATH:MATH1:FILTer:TWIDth 1
:MATH:MATH<x>:FILTer:TYPeset / query
Specifies or queries the filter type for math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | LPASs | HPASs | BPASs | BSTop | APASs | HILBert | DIFFerentiator | RC | RRC | Sets the filter type. |
MATH:MATH1:FILTer:TYPE LPASs MATH:MATH1:FILTer:TYPE? might return MATH:MATH1:FILTer:TYPE LPASs, indicating the filter type is LPASs.
:MATH:MATH<x>:FLEXray:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for FLEXray bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Field type for the math bus source. |
enum - Returns the field type for the math bus source for FLEXray bus.
:MATH:MATH<x>:FUNCtionset / query
Sets or queries the basic math arithmetic function for math waveform x. This command does not affect the same Math equation in Advanced math.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math waveform index specified by x. |
| function | enum | ADD | SUBtract | MULTiply | DIVide | Basic math function to apply. |
enum - Current basic math function.
MATH:MATH2:FUNCTION MULTIPLY MATH:MATH1:FUNCTION?
:MATH:MATH<x>:GATingset / query
Specifies or returns the math gating setting for Math FFT plots. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONE | SCREEN | CURSor | Gating mode for the math FFT plot. |
enum - Returns the current gating setting.
:MATH:MATH<x>:I2C:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for I2C. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for the math bus source for I2C.
MATH:MATH2:I2C:SUPPortedfields DATa MATH:MATH2:I2C:SUPPortedfields?
:MATH:MATH<x>:INTERpolationset / query
Sets or queries whether sinc interpolation is used for the specified math waveform. OFF disables interpolation and the waveform appears stair-steppy; ON enables sinc interpolation.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns sinc interpolation on or off for the math waveform. |
MATH:MATH2:INTERpolation ON MATH:MATH1:INTERpolation? might return MATH:MATH1:INTERpolation ON
:MATH:MATH<x>:LABel:COLorset / query
Sets or queries the color of the specified math label for math waveform x. An empty string returns the label color to the default color.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Color of the label. |
string - Returns the current label color as a quoted string, or an empty string for the default color.
MATH:MATH3:LABEL:COLOR "GREEN" MATH:MATH1:LABEL:COLOR? might return MATH:MATH1:LABEL:COLOR "BLUE"
:MATH:MATH<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified math label for math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Bold state of the specified math label; 0 or OFF turns bold off, ON turns it on. |
:MATH:MATH<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified math label. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies which math waveform label to use. |
| state | enum | <NR1> | OFF | ON | Sets italic off with 0 or OFF, and on with any other integer or ON. |
enum - Returns the italic state of the specified math label as 0 when off or 1 when on.
MATH:MATH4:FONT:ITALIC ON set the math 4 label to be italic. MATH:MATH1:FONT:ITALIC? might return MATH:MATH1:FONT:ITALIC 0 indicating the math 1 label is not currently italic.
:MATH:MATH<x>:LABel:FONT:SIZEset / query
Sets or queries the font size of the specified math label. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | - | Sets the label size in points. |
MATH:MATH4:LABEL:FONT:SIZE 32 MATH:MATH2:LABEL:FONT:SIZE?
:MATH:MATH<x>:LABel:FONT:TYPEset / query
Sets or queries the font type used for the specified math label. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Name of the font type. |
string - Returns the current math label font type as a quoted string.
MATH:MATH2:LABEL:FONT:TYPE "Serif" MATH:MATH3:LABEL:FONT:TYPE?
:MATH:MATH<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified math label. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Underline state for the math label; 0 turns off underline and any other integer turns it on. |
enum - Returns the underline state of the specified math label as 0 for off or another integer value for on.
MATH:MATH3:FONT:UNDERLINE ON MATH:MATH2:FONT:UNDERLINE?
:MATH:MATH<x>:LABel:NAMeset / query
Sets or queries the label string used to annotate the specified math waveform on the screen. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The label to annotate the math waveform. |
:MATH:MATH<x>:LABel:XPOSset / query
Sets or queries the X position of the specified math label. Math waveforms are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | pixels | Location in pixels where the label for the selected math waveform is displayed, relative to the left edge of the display. |
real (pixels) - Returns the X position of the specified math label in pixels, relative to the left edge of the display.
MATH:MATH2:LABEL:XPOS 5 moves the waveform label for the Math 2 waveform so that it begins 5 pixels to the right of the left edge of the screen. MATH:MATH2:LABEL:XPOS? might return MATH:MATH2:LABEL:XPOS 2.5, indicating that the waveform label for the Math 2 waveform is currently 2.5 pixels to the right of the left edge of the display.
:MATH:MATH<x>:LABel:YPOSset / query
Sets or queries the y-position of the specified math label. The position is relative to the baseline of the waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies which math waveform label to position. |
| y-position | real | pixels | Location of the label in pixels relative to the waveform baseline. |
real (pixels) - Returns the y-position of the selected math waveform label in pixels relative to the waveform baseline.
MATH:MATH2:LABEL:YPOS -2.5 moves the waveform label for the Math 2 waveform to 2.5 pixels below the baseline of the waveform.
:MATH:MATH<x>:LIN:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for LIN bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Field type to set for the LIN bus source. |
enum - Returns the current field type for the math bus source for LIN bus.
MATH:MATH2:LIN:SUPPortedfields DATa MATH:MATH2:LIN:SUPPortedfields?
:MATH:MATH<x>:MDIO:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for MDIO bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Math waveform index specified in the command mnemonic. |
| field type | enum | DATa | Sets the MDIO supported field type. |
enum - Returns the supported field type for the specified math waveform on the MDIO bus source.
MATH:MATH2:MDIO:SUPPortedfields DATa MATH:MATH2:MDIO:SUPPortedfields? might return MATH:MATH2:MDIO:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for MDIO bus is DATa.
:MATH:MATH<x>:MIL1553B:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for MIL1553B. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for MATH<x> for the MIL1553B bus source.
MATH:MATH2:MIL1553B:SUPPortedfields DATa MATH:MATH2:MIL1553B:SUPPortedfields? might return MATH:MATH2:MIL1553B:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for MIL1553B bus is DATa.
:MATH:MATH<x>:ONEWIRe:SUPPortedfieldsset / query
Sets or queries the field type for the math waveform bus source for ONEWIRe. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for the math waveform bus source for ONEWIRe, indicating the field type for MATH<x>.
MATH:MATH2:ONEWIRe:SUPPortedfields DATa MATH:MATH2:ONEWIRe:SUPPortedfields?
:MATH:MATH<x>:PARallel:SUPPortedfieldsset / query
Sets or queries the field type for the math waveform bus source for PARallel bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Field type to set. |
enum - Returns the current field type for the PARallel bus source.
MATH:MATH2:PARallel:SUPPortedfields DATa sets the field type to DATa.
:MATH:MATH<x>:PSIFIVe:SUPPortedfieldsset / query
Sets or queries the field type for the math waveform used as the PSIFIVe bus source. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | DRA | DRB | SDATa | Field type for the math bus source. |
enum - Returns the field type for the PSIFIVe bus source.
MATH:MATH2:PSIFIVe:SUPPortedfields DATa MATH:MATH2:PSIFIVe:SUPPortedfields?
:MATH:MATH<x>:RS232C:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for RS232C. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | TXData | RXData | Selects the RS232C field type for the math waveform. |
enum - Returns the current RS232C field type for the math waveform.
MATH:MATH2:RS232C:SUPPortedfields DATa sets the field type to DATa. MATH:MATH2:RS232C:SUPPortedfields? might return MATH:MATH2:RS232C:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for RS232C bus is DATa.
:MATH:MATH<x>:SDLC:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for an SDLC bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for the specified math waveform and SDLC bus source.
MATH:MATH2:SDLC:SUPPortedfields DATa MATH:MATH2:SDLC:SUPPortedfields?
Sets or queries the supported field type for the math bus source for an SDLC bus. The math waveform is specified by x.
enum - Returns the current field type for the SDLC bus source.
:MATH:MATH<x>:SENT:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for SENT bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | FCData | FCDFirst | FCDTwo | SDATa | Field type to select for the SENT bus source. |
enum - Returns the current field type for the SENT bus source.
MATH:MATH2:SENT:SUPPortedfields FCData sets the field type to FCData. MATH:MATH2:SENT:SUPPortedfields? might return MATH:MATH2:SENT:SUPPortedfields FCData, indicating the field type for MATH2 for the bus source for SENT bus is FCData.
Sets or queries the supported field type for the math bus source for SENT bus. The math waveform is specified by x.
enum - Returns the supported field type for the math bus source for SENT bus.
:MATH:MATH<x>:SIGNeddataset / query
Sets or queries whether bus field data is decoded as signed or unsigned for the specified math waveform x.
Queries or sets whether the bus field is decoded as signed data for drawing the math waveform.
enum - Returns whether the bus field is decoded as signed data for drawing the math waveform.
MATH:MATH2:SIGNeddata ON MATH:MATH2:SIGNeddata?
:MATH:MATH<x>:SMBUS:SUPPortedfieldsset / query
Sets or queries the supported field type for the SMBUS bus source of the specified math waveform. The only documented field type is DATa.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Field type for the math bus source. |
enum - Returns the supported field type for the SMBUS bus source of the specified math waveform.
MATH:MATH2:SMBUS:SUPPortedfields DATa MATH:MATH2:SMBUS:SUPPortedfields? might return MATH:MATH2:SMBUS:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for SMBUS bus is DATa.
Sets or queries the field type for the math bus source for SMBUS bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for the math bus source for SMBUS bus.
MATH:MATH2:SMBUS:SUPPortedfields DATa MATH:MATH2:SMBUS:SUPPortedfields? might return MATH:MATH2:SMBUS:SUPPortedfields DATa, indicating that the field type for MATH2 for the bus source for SMBUS bus is DATa.
:MATH:MATH<x>:SOUrce<x>set / query
Sets or queries the specified math source. The source can be CH<x>, MATH<x>, or REF<x>, and x in the command can be either 1 or 2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specified math source. |
MATH:MATH<x>:SOUrce<x> {CH<x>|MATH<x>|REF<x>}
MATH:MATH<x>:SOUrce<x>?Sets or queries the specified math source for the selected math waveform. The source can be channel, math, or reference source 1 or 2.
enum - Returns the current source setting for the specified math source.
MATH:MATH2:SOUrce2?
:MATH:MATH<x>:SPACEWIRe:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for SPACEWIRe bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | DATa | Sets the field type. |
enum - Returns the field type for the math bus source for SPACEWIRe bus.
MATH:MATH2:SPACEWIRe:SUPPortedfields DATa MATH:MATH2:SPACEWIRe:SUPPortedfields?
Sets or queries the field type for the math bus source for SPACEWIRe bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| data | enum | DATa | Sets the field type to DATa. |
enum - Returns the field type for the math bus source for SPACEWIRe bus.
MATH:MATH2:SPACEWIRe:SUPPortedfields DATa MATH:MATH2:SPACEWIRe:SUPPortedfields?
:MATH:MATH<x>:SPECTral:HORZset / query
Sets or queries the horizontal display scale of the spectral math waveform specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LOG | LINEAr | Selects the spectral math horizontal scale. |
Sets or queries the horizontal display scale of the spectral math waveform specified by x.
enum - Returns the current spectral math horizontal display scale.
:MATH:MATH<x>:SPECTral:MAGset / query
Sets or queries the units of the SpectralMag function in the specified math definition string. The Math waveform is specified by x.
enum - Returns the current SpectralMag units for the specified math waveform.
MATH:MATH2:SPECTral:MAG DBM MATH:MATH2:SPECTral:MAG?
Sets or queries the units of the SpectralMag function in the specified math definition string. The Math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Math waveform number specified in the math definition string. |
| units | enum | LINEAr | DBM | Units used for the SpectralMag function. |
enum - Returns the current SpectralMag units for the specified math waveform.
MATH:MATH2:SPECTral:MAG DBM MATH:MATH2:SPECTral:MAG? might return MATH:MATH2:SPECTral:MAG DBM, indicating that the SpectralMag units for Math 2 waveform are set to decibels.
:MATH:MATH<x>:SPECTral:PHASEset / query
Sets or queries the units of a SpectralPhase function in the specified math definition string. The Math waveform is specified by x.
enum - Returns the current SpectralPhase units for the specified math waveform.
MATH:MATH2:SPECTral:PHASE DEGREES sets the SpectralPhase units for Math 2 waveform to degrees. MATH:MATH2:SPECTral:PHASE? might return MATH:MATH2:SPECTral:PHASE RADIANS, indicating that the SpectralPhase units for Math 2 waveform are set to radians.
Sets or queries the units of a SpectralPhase function in the specified math definition string. The Math waveform is specified by x.
enum - Returns the current SpectralPhase units for the specified math waveform.
:MATH:MATH<x>:SPECTral:SOUrceset / query
Sets or queries the specified spectral math source for Math x. This only works when the math waveform type is FFT.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the spectral math waveform. |
enum - Returns the current spectral math source as CH<x>, MATH<x>, or REF<x>.
MATH:MATH3:SPECTRAL:SOURCE REF3 sets the source of the Spectral Math waveform to Ref 3. MATH:MATH2:SPECTRAL:SOURCE? might return MATH:MATH2:SPECTRAL:SOURCE CH4 indicating the Math 2 spectral source is Channel 4.
Sets or queries the specified spectral math source for the selected math waveform. It only works when the math type is FFT.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the source waveform for the spectral math measurement. |
enum - Returns the current spectral math source selection.
MATH:MATH3:SPECTRAL:SOURCE REF3 sets the source of the Spectral Math waveform to Ref 3. MATH:MATH2:SPECTRAL:SOURCE? might return MATH:MATH2:SPECTRAL:SOURCE CH4 indicating the Math 2 spectral source is Channel 4.
:MATH:MATH<x>:SPECTral:SUPPressset / query
Sets or queries whether suppression threshold for the specified math waveform is enabled. This only applies when Spectral Plot type is Phase.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Enables or disables the suppression threshold for the specified math waveform. |
MATH:MATH3:SPECTRAL:SUPPRESS ON enables the suppression threshold on the Math 3 spectral waveform.
Sets or queries whether the suppression threshold for the specified math waveform is enabled. It only applies when the Spectral Plot type is Phase.
enum - Returns whether suppression threshold is enabled for the specified math waveform.
MATH:MATH3:SPECTRAL:SUPPRESS ON enables the suppression threshold on the Math 3 spectral waveform.
:MATH:MATH<x>:SPECTral:SUPPress:VALueset / query
Sets or queries the suppression threshold value, in volts, for the specified math waveform. The spectral type must be Phase and suppression must be enabled for the command to have any effect.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the math waveform. |
| value | real | V | Suppression threshold of the specified math waveform. |
real (V) - Returns the suppression threshold value of the specified math waveform in volts.
MATH:MATH3:SPECTRAL:SUPPRESS:VALUE 100.0E-3 MATH:MATH1:SPECTRAL:SUPPRESS:VALUE?
Sets or queries the suppression threshold value of the specified math waveform in volts. The math waveform is specified by x, and the command has effect only when Spectral type is Phase and Suppression is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | V | Suppression threshold value for the specified math waveform. |
real (V) - Returns the suppression threshold value of the specified math waveform in volts.
MATH:MATH3:SPECTRAL:SUPPRESS:VALUE 100.0E-3 MATH:MATH1:SPECTRAL:SUPPRESS:VALUE?
:MATH:MATH<x>:SPECTral:TYPEset / query
Sets or queries the FFT type selected for spectral analysis of the specified math waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | MAGNitude | PHASe | REAL | IMAGinary | Selects the FFT spectral function. |
enum - Returns the selected FFT type for the specified math waveform.
MATH:MATH1:SPECTral:TYPE REAL MATH:MATH1:SPECTral:TYPE? might return MATH:MATH1:SPECTRAL:TYPE MAGNITUDE indicating the math is the magnitude spectral function.
Sets or queries the FFT type selected for spectral analysis of the specified math waveform.
enum - Returns the selected FFT type for the specified math waveform.
MATH:MATH1:SPECTral:TYPE REAL specifies the real spectral function. MATH:MATH1:SPECTral:TYPE? might return MATH:MATH1:SPECTRAL:TYPE MAGNITUDE indicating the math is the magnitude spectral function.
:MATH:MATH<x>:SPECTral:UNWRapset / query
Sets or queries whether phase unwrap of the spectral analyzer output data is enabled for the specified math waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Enables or disables phase unwrap for the specified math waveform. |
enum - Returns the phase unwrap setting for the specified math waveform.
MATH1:SPECTRAL:UNWRAP ON MATH1:SPECTRAL:UNWRAP? might return MATH1:SPECTRAL:UNWRAP 0, indicating that the phase unwrap of the spectral analyzer output data is disabled.
:MATH:MATH<x>:SPECTral:UNWRap:DEGreesset / query
Sets or queries how many degrees adjacent phase values can jump before being unwrapped. This applies only when the spectral type is Phase and phase unwrap is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| degrees | real | degrees | Value of unwrap phase in degrees. |
real (degrees) - Returns the unwrap phase value in degrees.
MATH:MATH2:SPECTRAL:UNWRAP:DEGREES 90 MATH:MATH2:SPECTRAL:UNWRAP:DEGREES?
Sets or queries how many degrees adjacent phase values can jump before being unwrapped. This applies only when the Spectral type is Phase and phase unwrap is enabled.
real (degrees) - Returns the unwrap phase in degrees.
MATH1:SPECTRAL:UNWRAP? might return MATH1:SPECTRAL:UNWRAP 0, indicating that the phase unwrap of the spectral analyzer output data is disabled. MATH2:SPECTRAL:UNWRAP:DEGREES? might return MATH2:SPECTRAL:UNWRAP:DEGREES 180 indicating unwrap phase of the spectral math 3 waveform is 180 degrees.
Sets or queries whether phase unwrap of the spectral analyzer output data is enabled for the specified math waveform x.
enum - Returns the phase unwrap state for the specified math waveform.
MATH1:SPECTRAL:UNWRAP ON MATH1:SPECTRAL:UNWRAP? might return MATH1:SPECTRAL:UNWRAP 0, indicating that the phase unwrap of the spectral analyzer output data is disabled.
:MATH:MATH<x>:SPECTral:WINdowset / query
Sets or queries the window function used to apply the specified FFT window to the input data for the specified math waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| window | enum | RECTANGular | HAMMing | HANNing | BLACKMANHarris | KAISERBessel | GAUSSian | FLATTOP2 | TEKEXPonential | Window function used to multiply the input data to the spectral analyzer. |
enum - Returns the currently selected spectral window function.
MATH2:SPECTRAL:WINDOW GAUSSIAN applies a Gaussian window to the spectral analyzer input data. MATH2:SPECTRAL:WINDOW? might return MATH2:SPECTRAL:WINDOW BLACKMANHarris, indicating that the window function used to multiply the spectral analyzer input data is the BLACKMANHarris function.
Sets or queries the FFT spectral window function used for the specified math waveform. The window determines the filter shape of the spectral analyzer in the frequency domain.
| Name | Type | Values | Description |
|---|---|---|---|
| window | enum | RECTANGular | HAMMing | HANNing | BLACKMANHarris | KAISERBessel | GAUSSian | FLATTOP2 | TEKEXPonential | Window function used to multiply the input data. |
enum - Returns the currently selected spectral window function for the specified math waveform.
MATH2:SPECTRAL:WINDOW GAUSSIAN applies a Gaussian window to the spectral analyzer input data. MATH2:SPECTRAL:WINDOW? might return MATH2:SPECTRAL:WINDOW BLACKMANHarris, indicating that the window function used to multiply the spectral analyzer input data is the BLACKMANHarris function.
:MATH:MATH<x>:SPI:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for an SPI bus waveform. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field | enum | DATa | MOSIdata | MISOdata | Field type for the SPI bus source. |
Sets or queries the field type for the math bus source for SPI bus on the specified math waveform x.
enum - Returns the current field type for the math bus source for SPI bus.
:MATH:MATH<x>:SPMI:SUPPortedfieldsset / query
Sets or queries the supported field type for the math waveform used as the bus source for SPMI. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | CDATa | RDATa | Selects the SPMI field type. |
enum - Returns the current SPMI supported field type for MATH<x>.
MATH:MATH2:SPMI:SUPPortedfields DATa sets the field type to DATa. MATH:MATH2:SPMI:SUPPortedfields? might return MATH:MATH2:SPMI:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for SPMI bus is DATa.
Sets or queries the supported field type for the math waveform used as the bus source for SPMI. The waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | CDATa | RDATa | Field type for the math waveform bus source. |
enum - Returns the field type for the math waveform bus source for SPMI.
MATH:MATH2:SPMI:SUPPortedfields DATa MATH:MATH2:SPMI:SUPPortedfields?
:MATH:MATH<x>:SVID:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for SVID bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | MPAYload | SPAYload | Field type for the math bus source for SVID bus. |
MATH:MATH2:SVID:SUPPortedfields MPAYload MATH:MATH2:SVID:SUPPortedfields? might return MATH:MATH2:SVID:SUPPortedfields MPAYload, indicating the field type for MATH2 for the bus source for SVID bus is MPAYload.
Sets or queries the field type for the math bus source for SVID bus. The math waveform is specified by x.
enum - Returns the supported field type for the specified math waveform and SVID bus source.
MATH:MATH2:SVID:SUPPortedfields? might return MATH:MATH2:SVID:SUPPortedfields MPAYload, indicating the field type for MATH2 for the bus source for SVID bus is MPAYload.
:MATH:MATH<x>:TYPeset / query
Sets or queries the math type for the specified math waveform x. Supported types are basic, filter, FFT, and advanced math.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | BASic | FILTER | FFT | ADVanced | Math type to set. |
MATH:MATH2:TYPE BASIC MATH:MATH2:TYPE?
:MATH:MATH<x>:USB:SUPPortedfieldsset / query
Sets or queries the field type for the math bus source for USB bus. The math waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field type | enum | DATa | Sets the field type to DATa. |
enum - Returns the current field type for the math bus source for USB bus.
MATH:MATH2:USB:SUPPortedfields DATa sets the field type to DATa. MATH:MATH2:USB:SUPPortedfields? might return MATH:MATH2:USB:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for USB bus is DATa.
Sets or queries the field type for the math bus source for USB bus. The math waveform is specified by x.
enum - Returns the current field type for the math bus source for USB bus.
MATH:MATH2:USB:SUPPortedfields DATa MATH:MATH2:USB:SUPPortedfields? might return MATH:MATH2:USB:SUPPortedfields DATa, indicating the field type for MATH2 for the bus source for USB bus is DATa.
:MATH:MATH<x>:VUNITset / query
Specifies or returns the math custom vertical units for the selected math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The custom vertical units. |
string - The current math custom vertical units string.
MATH:MATH2:VUNIT "Small" MATH:MATH2:VUNIT? might return MATH:MATH2:VUNIT "Large" indicating the Math 2 vertical unit is set to "Large".
:MATH:MATH<x>:VUNIT?query
Specifies or returns the math custom vertical units for math waveform x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The custom vertical units. |
string - Returns the current math custom vertical units.
MATH:MATH2:VUNIT "Small" MATH:MATH2:VUNIT? might return MATH:MATH2:VUNIT "Large" indicating the Math 2 vertical unit is set to "Large".
:MATH:AUTOSCALEset / query
Automatically scales the selected math waveform.
:MATH:DEFINEset / query
Defines the math waveform expression. The factory default is "CH1+CH2".
| Name | Type | Values | Description |
|---|---|---|---|
| expression | string | - | Math waveform definition expression. |
:MATH:HORIZONTAL:POSITIONset / query
Sets the horizontal position for the math waveform. The factory default is 50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Horizontal position value for the math waveform. |
:MATH:set / query
Sets the default MATH waveform scale factor. The factory default value is 4.0000E-6.
:MATH:HORIZONTAL:UNITSset / query
Sets the horizontal units used for math waveform display. The factory default is "s".
:MATH:LABELset / query
Sets the label for the MATH waveform or function. The factory default is an empty string.
| Name | Type | Values | Description |
|---|---|---|---|
| label | string | - | Label text for the math trace. |
:MATH:SPECTRAL:MAGset / query
Sets the spectral magnitude display format. The factory default is DB.
:MATH:SPECTRAL:WINDOWset / query
Sets the spectral window function for math spectral analysis. The factory default is HANNING.
| Name | Type | Values | Description |
|---|---|---|---|
| window | enum | HANNING | Spectral window function. |
:MATH:TYPEset / query
Sets the math waveform type. The factory default is DUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | DUAL | Math waveform type. |
:MATH:VERTICAL:POSITIONset / query
Sets the vertical position for the math waveform display. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | V | Vertical position offset. |
:MATH:VERTICAL:SCALEset / query
Sets the vertical scale for the math waveform display. The factory default is 100.0000E-3 V.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | V | Vertical scale value. |
:MATH:VERTICAL:UNITSset / query
Sets the vertical units used for math waveforms. The factory default is "V".
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | "V" | Vertical units for the math waveform. |
Sets or queries the status of TJ histogram in a composite histogram plot.
enum - Returns the TJ histogram status.
:PLOT:ADDNewset / query
Adds the specified plot. The plot name must be of the form "PLOT<NR1>", where <NR1> is greater than or equal to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | The specified plot name. |
PLOT:ADDNEW "PLOT1" adds PLOT1.
:PLOT:DELeteset / query
Deletes the specified plot.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The specified plot, in the form "PLOT<NR1>" where NR1 is at least 1. |
PLOT:DELETE "PLOT1" deletes PLOT1.
:PLOT:LIST?query
Lists all currently defined plots.
string - A list of all currently defined plots is returned.
:PLOT:PLOT<x>:BATHtub:BERset / query
Sets or queries the bathtub BER value for the specified plot.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | - | The bathtub BER value. |
real - Returns the bathtub BER value.
PLOT:PLOT1:BATHtub:BER 16 PLOT:PLOT1:BATHtub:BER?
Sets or queries the bathtub BER value for the specified plot.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | - | The bathtub BER value. |
real - Returns the bathtub BER value.
PLOT:PLOT1:BATHtub:BER 16 PLOT:PLOT1:BATHtub:BER?
:PLOT:PLOT<x>:BATHtub:XAXISUnitsset / query
Sets or queries the X-axis unit for the bathtub plot. The unit can be set to unit intervals or seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| unit | enum | UNITIntervals | SECOnds | Specifies the X-axis units. |
enum - Returns the current X-axis unit.
PLOT:PLOT1:BATHtub:XAXISUnits SECONDS sets the units to seconds. PLOT:PLOT1:BATHtub:XAXISUnits? might return SECONDS.
Sets or queries the X-axis unit for the bathtub plot, either unit intervals or seconds.
enum - Returns the current X-axis unit setting.
PLOT:PLOT1:BATHtub:XAXISUnits SECONDS sets the units to seconds. PLOT:PLOT1:BATHtub:XAXISUnits? might return SECONDS.
:PLOT:PLOT<x>:BITTypeset / query
Sets or queries the bit type to display for the specified eye diagram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| bit type | enum | ALLBits | TRANSition | NONTRANsition | Bit type to display for the plot. |
Sets or queries the bit type to display for the specified eye diagram plot.
enum - Returns the current bit type selection for the specified plot.
Returns a binary stream of double values containing the x, y, and hits value. The data returned is in binary format.
block - A binary stream of double values containing the x, y, and hits value.
PLOT:PLOT1:EXPORTRaw? might return #73000000{øÔ$y¾„´Æ B @, indicating the x,y and hits value.:PLOT:PLOT<x>:EXTENDuisset / query
Sets or queries the number of UIs surrounding the eye boundary UIs used for fast eye rendering.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | - | The number of surrounding UIs. |
real - Returns the number of surrounding UIs used for fast eye rendering.
Sets or queries the number of UIs surrounding the eye boundary UIs used for fast eye rendering.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| count | integer | - | Number of surrounding UIs. |
integer - Returns the number of surrounding UIs used for fast eye rendering.
:PLOT:PLOT<x>:DDJHistogramset / query
Sets or queries the status of DDJ Histogram in a composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Controls whether DDJHistogram is active or off. |
enum - Returns the DDJHistogram status.
PLOT:PLOT<x>:DDJHistogram ON enables DDJHistogram.
Sets or queries the status of DDJ Histogram in a composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns DDJHistogram on or off. |
enum - Returns the DDJHistogram status.
PLOT:PLOT<x>:DDJHistogram ON enables DDJHistogram.
:PLOT:PLOT<x>:EYERenderset / query
Sets or queries the eye rendering method for the specified plot. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| method | enum | FAst | COMPlete | CDOTs | Eye rendering method to use. |
enum - Returns the current eye rendering method for the specified plot.
PLOT:PLOT2:EYERENDER FAST enables fast eye rendering for plot 2. PLOT:PLOT2:EYERENDER? might return PLOT:PLOT2:EYERENDER FAST, indicating that fast eye rendering is enabled in plot 2.
Sets or queries the eye rendering method for the specified plot.
enum - Returns the current eye rendering method for the specified plot.
:PLOT:PLOT<x>:INTerpolateset / query
Turns the interpolation state for the specified SOA plot on or off. This command applies only to option 5-PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| state | enum | ON | OFF | Turns interpolation on or off for the SOA plot. |
PLOT:PLOT2:INTerpolate ON PLOT:PLOT2:INTerpolate?
Turns on or off the interpolation state for the specified SOA plot. Requires option 5-PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
enum - Returns the interpolation state of the specified SOA plot.
PLOT:PLOT2:INTerpolate ON PLOT:PLOT2:INTerpolate?
:PLOT:PLOT<x>:LABel:COLorset / query
Sets or queries the color of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| label color | string | - | Label color to use; the default color is specified by a quoted empty string, which is the only available color. |
string - Returns the label color; a quoted empty string indicates the default color.
PLOT:PLOT2:LABel:COLor " " PLOT:PLOT2:LABel:COLor?
Sets or queries the color of the specified trend label. This command/query only applies to Time Trend plots.
string - Returns the label color. The default color is specified by a quoted empty string, and is the only available color.
PLOT:PLOT2:LABel:COLor " " PLOT:PLOT2:LABel:COLor?
:PLOT:PLOT<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Controls whether the label font is bold. <NR1> = 0 disables bold font; any other value turns it on. |
enum - Returns the bold state of the specified trend label.
PLOT:PLOT1:LABEL:FONT:BOLD 1 sets the label to a bold font. PLOT:PLOT1:LABEL:FONT:BOLD? might return PLOT:PLOT1:LABEL:FONT:BOLD 1 indicating the label is bold.
Sets or queries whether the specified trend label uses a bold font. This command/query only applies to Time Trend plots.
enum - Returns the bold-font state of the specified trend label as 0/1.
PLOT:PLOT1:LABEL:FONT:BOLD? might return PLOT:PLOT1:LABEL:FONT:BOLD 1 indicating the label is bold.
:PLOT:PLOT<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Italic font state. |
enum - Returns the italic state of the specified trend label.
PLOT:PLOT1:LABel:FONT:ITALic 1 PLOT:PLOT1:LABel:FONT:ITALic?
Sets or queries the italic state of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Sets the italic font state; <NR1> disables italic font when 0 and enables it for any other value. |
enum - Returns the italic font state of the specified trend label.
PLOT:PLOT1:LABel:FONT:ITALic 1 sets the font to italic. PLOT:PLOT1:LABel:FONT:ITALic? might return PLOT:PLOT1:LABEL:FONT:ITALIC 0 indicating the font in not italic.
:PLOT:PLOT<x>:LABel:FONT:SIZEset / query
Sets or queries the font size of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | The font size. |
:PLOT:PLOT<x>:LABel:FONT:TYPEset / query
Sets or queries the font type of the specified trend label. This command only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Font type for the specified trend label. |
string - Returns the current font type of the specified trend label.
PLOT:PLOT1:LABel:FONT:TYPE Arial PLOT:PLOT1:LABel:FONT:TYPE? might return PLOT:PLOT1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman" indicating the font type is Frutiger LT Std 55 Roman.
Sets or queries the font type of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the trend label index. |
| font type | string | - | Font type of the specified trend label. |
string - Returns the font type of the specified trend label.
PLOT:PLOT1:LABel:FONT:TYPE Arial PLOT:PLOT1:LABel:FONT:TYPE? might return PLOT:PLOT1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman" indicating the font type is Frutiger LT Std 55 Roman.
:PLOT:PLOT<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Underline state; 0 disables underline font, OFF disables underline font, and ON enables underline font. |
enum - Returns the underline state of the specified trend label as 0, OFF, or ON.
PLOT:PLOT1:LABel:FONT:UNDERline 1 set the font to underlined. PLOT:PLOT1:LABel:FONT:UNDERline? PLOT:PLOT1:LABEL:FONT:UNDERLINE 0 indicating the font is underlined.
Sets or queries the underline state of the specified trend label. This command/query only applies to Time Trend plots.
enum - Returns the underline state of the specified trend label.
PLOT:PLOT1:LABel:FONT:UNDERline 1 PLOT:PLOT1:LABel:FONT:UNDERline? PLOT:PLOT1:LABEL:FONT:UNDERLINE 0
:PLOT:PLOT<x>:LABel:NAMeset / query
Sets or queries the specified trend's label. This command/query only applies to Time Trend plots.
Queries the label name of the specified plot trend label. This command only applies to Time Trend plots.
string - Returns the label name as a quoted string.
:PLOT:PLOT<x>:LABel:XPOSset / query
Sets or queries the X-position of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| x-position | real | pixels | X-position of the label, in pixels relative to the left edge of the display. |
real (pixels) - Returns the X position of the label in pixels relative to the left edge of the display.
PLOT:PLOT1:LABel:XPOS 200 PLOT:PLOT1:LABel:XPOS?
Sets or queries the X-position of the specified trend label. This command/query only applies to Time Trend plots.
real (pixels) - Returns the X position of the label in pixels relative to the left edge of the display.
PLOT:PLOT1:LABel:XPOS 200 PLOT:PLOT1:LABel:XPOS? might return PLOT:PLOT1:LABEL:XPOS 45.0000
:PLOT:PLOT<x>:LABel:YPOSset / query
Sets or queries the y-position of the specified trend label. This command/query only applies to Time Trend plots.
| Name | Type | Values | Description |
|---|---|---|---|
| y-position | real | pixels | The y-position of the label relative to the left edge of the display. |
real (pixels) - Returns the y-position of the specified trend label in pixels relative to the left edge of the display.
Returns the Y position of the specified plot label. The example indicates the value is returned as a floating-point number in pixels.
real (pixels) - The Y position of the specified plot label, returned as a floating-point value in pixels.
PLOT:PLOT1:LABel:YPOS? might return PLOT:PLOT1:LABEL:YPOS 0.0E+0 indicating the Y position is 45.0 pixels to the right of the left edge of the display.
:PLOT:PLOT<x>:MASK?query
Returns the name of the eye diagram mask test associated with the specified plot. If a plot does not have an eye diagram mask test, it returns an empty string.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
string - Quoted string containing the name of the eye diagram mask test associated with the specified plot, or an empty string if no mask test is associated.
PLOT:PLOT1:MASK? might return "mask2", indicating that the eye diagram mask test mask2 is associated with plot 1.
:PLOT:PLOT<x>:MASKOffset:HORizontal:AUTOfitset / query
Enables or disables eye mask autofit in the specified plot. Requires option 5-DJA or 6-DJA (Advanced Jitter Analysis).
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| state | enum | ON | OFF | ON enables eye mask autofit; OFF disables it. |
PLOT:PLOT1:MASKOffset:HORizontal:AUTOfit ON enables the eye mask autofit in mask plot 1. PLOT:PLOT2:MASKOffset:HORizontal:AUTOfit? might return PLOT:PLOT2:MASKOffset:HORizontal:AUTOfit 0, indicating that mask autofit is disabled in mask plot 2.
Enables or disables eye mask autofit in the specified plot. Requires option 5-DJA or 6-DJA (Advanced Jitter Analysis).
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| state | enum | ON | OFF | Enables or disables eye mask autofit. |
PLOT:PLOT1:MASKOffset:HORizontal:AUTOfit ON PLOT:PLOT2:MASKOffset:HORizontal:AUTOfit?
:PLOT:PLOT<x>:MASKOffset:PERCENTui:FROMset / query
Sets or queries the allowed range for the mask to move in the left direction. Only applies to eye diagram plots.
| Name | Type | Values | Description |
|---|---|---|---|
| range | real | % | Allowed range in percentage for the mask to move in the left direction. |
real (%) - Returns the allowed range for the mask to move in the left direction, in percent.
PLOT:PLOT1:MASKOffset:PERCENTui:FROM 10 PLOT:PLOT1:MASKOffset:PERCENTui:FROM?
Sets or queries the allowed range for the mask to move in the left direction. Only applies to eye diagram plots.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | % | Allowed range in percentage for the mask to move in the left direction. |
real (%) - Returns the allowed range in percentage for the mask to move in the left direction.
PLOT:PLOT1:MASKOffset:PERCENTui:FROM 10 PLOT:PLOT1:MASKOffset:PERCENTui:FROM?
:PLOT:PLOT<x>:MASKOffset:PERCENTui:TOset / query
Sets or queries the allowed range for the mask to move in the right direction. Only applies to eye diagram plots.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | % | Allowed range in percentage for the mask to move in the right direction. |
PLOT:PLOT1:MASKOffset:PERCENTui:TO 10 PLOT:PLOT1:MASKOffset:PERCENTui:TO? might return PLOT:PLOT1:MASKOffset:PERCENTui:TO 10.0,
Sets or queries the allowed range for the mask to move in the right direction. Only applies to eye diagram plots.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | - | - | Plot number. |
| range | real | % | Allowed range in percentage for the mask to move in the right direction. |
real (%) - The allowed range for the mask to move in the right direction, in percent.
PLOT:PLOT1:MASKOffset:PERCENTui:TO 10 PLOT:PLOT1:MASKOffset:PERCENTui:TO? might return PLOT:PLOT1:MASKOffset:PERCENTui:TO 10.0,
:PLOT:PLOT<x>:MASKTESTTYPEset / query
Sets the mask test type for the specified plot. The available settings are Off, Mask Hits, and Mask Margin.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| mode | enum | OFF | MHITs | MMARgin | Mask test type setting. |
PLOT:PLOT2:MASKTESTTYPE MHITs PLOT:PLOT2:MASKTESTTYPE?
Sets or returns the mask test type for a plot. The value can be Off, Mask Hits, or Mask Margin.
enum - Returns the current mask test type for the specified plot.
PLOT:PLOT2:MASKTESTTYPE MHITs PLOT:PLOT2:MASKTESTTYPE?
:PLOT:PLOT<x>:MMARgin:FTHResholdset / query
Sets or returns the threshold of margin value that will cause a test failure.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| threshold | real | - | Failure threshold. |
real - Returns the current failure threshold for the specified plot.
PLOT:PLOT2:MMARgin:FTHReshold 50.0 sets failure threshold to 50.0 for plot 2. PLOT:PLOT2:MMARgin:FTHReshold? might return PLOT:PLOT2:MMARgin:FTHReshold 50.0, indicating that mask margin failure threshold is 50.0 for plot 2.
Sets or returns the threshold of margin value that will cause a test failure. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| threshold | real | - | Failure threshold. |
real - Returns the current failure threshold for the selected plot.
PLOT:PLOT2:MMARgin:FTHReshold 50.0 PLOT:PLOT2:MMARgin:FTHReshold?
:PLOT:PLOT<x>:MMARgin:MHRThresholdset / query
Sets or queries the mask margin hit ratio threshold for a plot. The plot number is specified by the <x> node.
| Name | Type | Values | Description |
|---|---|---|---|
| plot | integer | - | Plot number. |
| threshold | real | - | Mask margin hit ratio threshold. |
real - Returns the mask margin hit ratio threshold for the specified plot.
PLOT:PLOT2:MMARgin:MHRThreshold 0.5 sets the mask margin hit ratio threshold to 0.5 for plot 2. PLOT:PLOT2:MMARgin:MHRThreshold? might return PLOT:PLOT2:MMARgin:MHRThreshold 0.5, indicating that the mask margin hit ratio threshold is 0.5 for plot 2.
Sets or queries the mask margin hit ratio threshold for a plot. The plot number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| threshold | real | - | Mask margin hit ratio threshold. |
real - Returns the mask margin hit ratio threshold for the specified plot.
PLOT:PLOT2:MMARgin:MHRThreshold 0.5 PLOT:PLOT2:MMARgin:MHRThreshold?
:PLOT:PLOT<x>:MMARgin:MHTHresholdset / query
Sets or returns the mask margin threshold in terms of total mask hits.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | integer | - | Plot number. |
| count | integer | - | Mask margin threshold value in total mask hits. |
integer - Returns the mask margin threshold in total mask hits for the specified plot.
PLOT:PLOT2:MMARgin:MHTHreshold 2500 PLOT:PLOT2:MMARgin:MHTHreshold?
Sets or returns the mask margin threshold in terms of total mask hits.
| Name | Type | Values | Description |
|---|---|---|---|
| plot | integer | - | Plot number. |
:PLOT:PLOT<x>:MMARgin:MMECriteriaset / query
Sets or queries the mask margin stop condition for a plot. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | THITs | HRATio | Selects the mask margin stop condition. |
Returns the pass/fail criteria for mask margin on the specified plot. The query response indicates whether the criteria is set to Total Hits or Hit Ratio.
| Name | Type | Values | Description |
|---|---|---|---|
| plot | integer | - | Plot number. |
enum - Pass/fail criteria for mask margin on the specified plot.
PLOT:PLOT2:MMARgin:MMECriteria? might return PLOT:PLOT2:MMARgin:MMECriteria MHITs, indicating that pass/fail criteria is set to Total Hits in plot 2.
:PLOT:PLOT<x>:MMARgin:STEPsizeset / query
Sets or queries the step size used in mask margin for the specified eye diagram plot. Requires option DJA.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| step size | real | - | Step size used in mask margin. |
real - Returns the current step size for the specified plot.
PLOT:PLOT2:MMARgin:STEPsize 0.1 sets step size to 0.1 for plot 2. PLOT:PLOT2:MMARgin:STEPsize? might return PLOT:PLOT2:MMARgin:STEPsize 0.1, indicating that step size is 0.1 for plot 2.
Sets or queries the step size used in mask margin for the specified eye diagram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
| step size | real | - | Step size. |
real - Returns the current step size used in mask margin for the specified plot.
PLOT:PLOT2:MMARgin:STEPsize 0.1 sets step size to 0.1 for plot 2. PLOT:PLOT2:MMARgin:STEPsize? might return PLOT:PLOT2:MMARgin:STEPsize 0.1, indicating that step size is 0.1 for plot 2.
:PLOT:PLOT<x>:NUMBinsset / query
Sets or queries the current histogram/composite jitter histogram resolution for the specified plot.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | integer | - | The plot number. |
Sets or queries the number of bins for the histogram plot. The query returns the current bin setting, such as TWOFIFTY.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 0 - 9 | Plot number. |
| value | enum | TWENTYFIVE | FIFTY | TWOFifty | FIVEHundred | TWOThousand | MAXimum | Number of bins to set. |
enum - Returns the current number of bins as a keyword such as TWOFIFTY.
PLOT:PLOT4:NUMBins TWENTYFIVE sets the number of bins to 25. PLOT:PLOT4:NUMBins? might return PLOT:PLOT4:NUMBINS TWOFIFTY indicating the histogram resolution is 250 bins.
:PLOT:PLOT<x>:PJHistogramset / query
Sets or queries the status of PJ Histogram in composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns PJ Histogram on or off. |
enum - Returns the PJ Histogram status.
PLOT:PLOT<x>:PJHistogram ON enables PJHistogram.
Sets or queries the status of PJ Histogram in composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns PJ Histogram off or on. |
enum - Returns the PJ Histogram status.
PLOT:PLOT<x>:PJHistogram ON enables PJHistogram.
:PLOT:PLOT<x>:PREGionset / query
Sets or returns the pulse region for recovery plot. Requires the WBG-DPT License.
enum - Returns the pulse region for recovery plot.
Sets or returns the pulse region for recovery plot for the specified plot number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
enum - Returns the selected pulse region for the recovery plot.
PLOT:PLOT2:PREGion SELECTED PLOT:PLOT1:PREGion?
:PLOT:PLOT<x>:PSIJset / query
Sets or returns the plot data type for the respective PSIJ plot.
| Name | Type | Values | Description |
|---|---|---|---|
| PLOT<x> | - | - | The plot number. |
| plot data type | enum | ORIGINAL | EMULATED | Selects the plot data type. |
enum - Returns the current plot data type for the PSIJ plot.
PLOT:PLOT1:PSIJ EMULATED PLOT:PLOT1:PSIJ?
:PLOT:PLOT<x>:PSIJ?query
Sets or returns the plot data type for the respective PSIJ plot.
enum - Returns the current plot data type.
PLOT:PLOT1:PSIJ EMULATED PLOT:PLOT1:PSIJ?
:PLOT:PLOT<x>:PTYPeset / query
Sets or returns the phasor type of the phasor diagram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| plot number | integer | - | Plot number. |
| mode | enum | RMS | MAGNITUDE | Phasor type to set. |
enum - Returns the current phasor type of the phasor diagram plot.
PLOT:PLOT1:PTYPe RMS sets the phasor type to RMS. PLOT:PLOT1:PTYPe? might return PLOT:PLOT1:PTYPe RMS indicating the phasor type is RMS.
:PLOT:PLOT<x>:PTYPe?query
Sets or returns the phasor type of the phasor diagram plot.
enum - Returns the current phasor type.
PLOT:PLOT1:PTYPe RMS PLOT:PLOT1:PTYPe? might return PLOT:PLOT1:PTYPe RMS indicating the phasor type is RMS.
:PLOT:PLOT<x>:RAILNUMset / query
Sets or queries the DPM histogram source rail number for a plot. The plot number is specified by x, and valid rail numbers are 1 to 7.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | integer | 1 - 7 | Plot number. |
| rail<x> | integer | 1 - 7 | Rail number. |
PLOT:PLOT2:RAILNUM RAIL6 PLOT:PLOT5:RAILNUM?
Returns the rail number for the specified DPM plot. The valid rail values are 1 to 7.
| Name | Type | Values | Description |
|---|---|---|---|
| plot | integer | - | Plot number. |
enum - Returns the selected rail identifier, such as RAIL1 through RAIL7.
PLOT:PLOT2:RAILNUM RAIL6 sets the DPM histogram source to Rail 6 of plot 2. PLOT:PLOT5:RAILNUM? might return RAIL1, indicating that the DPM histogram source is Rail 1 of plot 5.
Queries the mask hit ratio value when the mask test type is set to Mask Hits.
| Name | Type | Values | Description |
|---|---|---|---|
| plot<x> | integer | 1 - 7 | Plot number. |
real - Returns the mask hit ratio value.
PLOT:PLOT2:RESult:MHRatio? might return PLOT:PLOT2:RESult:MHRatio 0.3, indicating that mask hit ratio is 0.3 for plot 2.
Returns the mask margin value for the specified plot number.
real - The mask margin value for the specified plot.
:PLOT:PLOT<x>:RJHistogramset / query
Sets or queries the status of RJ Histogram in a composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns RJ Histogram off or on. |
PLOT:PLOT2:RJHistogram ON enables RJHistogram.
Sets or queries the status of RJ Histogram in a composite histogram plot.
enum - Returns the RJ Histogram status.
PLOT:PLOT<x>:RJHistogram?
:PLOT:PLOT<x>:SOUrce<x>set / query
Sets or queries the plot source.
| Name | Type | Values | Description |
|---|---|---|---|
| MEAS<x> | - | - | The specified measurement source for the specified plot. |
Sets or queries the plot source.
:PLOT:PLOT<x>:SPECtrum:BASEset / query
Sets or queries the spectrum base. Undefined for non-spectrum plots.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | - | The spectrum base. |
real - The spectrum base value.
PLOT:PLOT3:SPECtrum:BASE -10 sets the base to -10. PLOT:PLOT3:SPECtrum:BASE? might return PLOT:PLOT3:SPECTRUM:BASE -15 indicating the base is -15.
Sets or queries the spectrum base for the specified plot. Undefined for non-spectrum plots.
real - Returns the spectrum base.
PLOT:PLOT3:SPECtrum:BASE -10 PLOT:PLOT3:SPECtrum:BASE?
:PLOT:PLOT<x>:SPECtrum:DYNRangeset / query
Sets or queries the dynamic range value for a spectrum plot.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot index. |
| value | real | dB | Dynamic range value. |
real (dB) - Returns the dynamic range value.
PLOT:PLOT3:SPECtrum:DYNRange 150 sets the dynamic range to 150 dB. PLOT:PLOT3:SPECtrum:DYNRange? might return PLOT:PLOT3:SPECTRUM:DYNRANGE 100 indicating the dynamic range is 100 dB.
Sets or queries the dynamic range value for the specified spectrum plot.
real - Returns the dynamic range value for the specified spectrum plot.
PLOT:PLOT3:SPECtrum:DYNRange 150 sets the dynamic range to 150 dB. PLOT:PLOT3:SPECtrum:DYNRange? might return PLOT:PLOT3:SPECTRUM:DYNRANGE 100 indicating the dynamic range is 100 dB.
:PLOT:PLOT<x>:SUBGroup:Displayset / query
Sets or queries the selected display of a phasor plot. Requires option IMDA.
Sets or queries the IMDA time trend and acq trend plot display configuration for the selected plot. The plot number is specified by PLOT<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Plot number. |
enum - Returns the current plot display configuration for the selected plot.
PLOT:PLOT1:SUBGroup:Display ALL PLOT:PLOT1:SUBGroup:Display?
:PLOT:PLOT<x>:SUBGroup:TRENdset / query
Sets or queries the measurement selection of the trend plot. Requires the IMDA option.
enum - Returns the current trend plot measurement selection.
Sets or queries the measurement selection of the trend plot. Requires the IMDA option.
enum - Returns the current measurement selection of the trend plot.
PLOT:PLOT1:SUBGroup:TRENd?
:PLOT:PLOT<x>:TJHistogramset / query
Sets or queries the status of TJ Histogram in the composite histogram plot.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns TJ Histogram on or off. |
enum - Returns the TJ Histogram status.
PLOT:PLOT<x>:TJHistogram ON enables TJHistogram.
Sets or queries the status of TJ Histogram in the composite histogram plot. ON/1 activates TJHistogram; OFF/0 turns it off.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | TJ Histogram status. |
enum - Returns the TJ Histogram status.
PLOT:PLOT<x>:TJHistogram ON enables TJHistogram.
:PLOT:PLOT<x>:TYPeset / query
Sets or returns the current plot type of the specified plot.
:PLOT:PLOT<x>:TYPe?query
Returns the plot type for the specified plot number. The returned value is one of the listed plot type keywords.
enum - Returns the plot type for the specified plot number.
PLOT:PLOT2:TYPe BATHTUB creates a bathtub plot. PLOT:PLOT2:TYPe? might return PLOT:PLOT2:TYPE EYEDIAGRAM indicating the plot is an eye diagram.
Specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Data.
Specifies the 16-bit value to use when searching on the Ethernet TCP header destination port number.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 65535 | 16-bit destination port value used for the search. |
Sets the 32-bit value used when searching on the Ethernet TCP header sequence number.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | - | 32-bit value to use when searching on the Ethernet TCP header sequence number. |
Sets the 16-bit value to use when searching on the Ethernet TCP header source port number.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 65535 | 16-bit source port value used for the search. |
Sets or queries the trigger condition for a NFC bus.
Specifies the length of the data string in bytes to be used for an NFC trigger if the trigger condition is DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 0 | Length of the NFC data string used for triggering. |
Specifies the binary data string used for NFC triggering if the trigger condition is DATA.
Sets or queries the error type for the NFC bus.
Sets or queries the number of payload bits for the specified bus.
Sets or queries the trigger on response code for an NFC bus.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPeset / query
Sets or queries the trigger command/response type for an NFC bus.
Specifies the binary data string used for NFC triggering if the trigger condition is UID.
Specifies a field or condition for an NRZ bus to search on.
Specifies the length of the data string, in bytes, to use when searching on the NRZ signal.
Sets or queries the binary data value to be used when searching on a NRZ signal.
Specifies the binary data string used for ONEWIRe triggering if the trigger condition is COMMAND.
Sets or queries the trigger condition for a ONEWIRe bus.
enum - Returns the ONEWIRe trigger condition.
Specifies the length of the data string in bytes to be used for ONEWIRe triggering if the trigger condition is DATA.
Specifies the binary data string used for ONEWIRe triggering if the trigger condition is DATA.
Sets or queries the family code for Match ROM in a ONEWIRE bus.
Sets or queries the serial number for Match ROM in ONEWIRE bus.
Sets or queries the family code for Read ROM in the ONEWIRE bus.
Sets or queries the serial number for Overdrive match ROM in the ONEWIRE bus.
string - Returns the serial number for Overdrive match ROM in the ONEWIRE bus.
Sets or queries the family code for Read ROM in the ONEWIRE bus.
Sets or queries the serial number for Read ROM in the ONEWIRE bus.
Sets or queries the ROM code for Search ROM in the ONEWIRE bus.
Sets or queries the data value for a parallel bus trigger search to determine where to place a mark.
Sets or queries the binary block data string used for PSI5 triggering if the trigger condition is block ID.
:SEARCH:ADDNewset / query
Adds the specified search.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The search to add. |
:SEARCH:DELETEALLset / query
Deletes all the active instances of search definitions defined in the scope application.
SEARCH:DELETEALL deletes all the active instances of search definitions.
:SEARCH:DELeteset / query
Deletes the specified search.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The specified search to delete, in the form "SEARCH<NR1>" where <NR1> is greater than or equal to 1. |
SEARCH:DELete <QString>
:SEARCH:LIST?query
Returns a comma-separated list of all currently defined searches.
string - All currently defined searches.
SEARCH:LIST? might return :SEARCH:LIST SEARCH1,SEARCH2 indicating that Search 1 and Search 2 are defined.
:SEARCH:SEARCH<x>:COPyset / query
Copies the search criteria to or from the trigger for the specified search number x. It accepts either SEARCHtotrigger or TRIGgertosearch.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SEARCHtotrigger | TRIGgertosearch | Selects whether to copy the search criteria to the trigger or copy the trigger criteria to the search. |
SEARCH:SEARCH1:COPY TRIGGERTOSEARCH copies the trigger criteria to the search 1 criteria. SEARCH:SEARCH1:COPY SEARCHTOTRIGGER copies the search criteria to the trigger.
:SEARCH:SEARCH<x>:NAVigateset / query
Sets the navigation action for search marks. NONE is the default setting when no action is being taken.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NEXT | PREVious | MIN | NONE | MAX | Navigation action for search marks. |
SEARCH:SEARCH1:NAVigate NEXT goes to the next search mark.
Returns the total number of found search marks for the specified search number x.
integer - The total number of found search marks for this search.
Specifies a field or condition for an ARINC429 bus to search on. The search number is given by x, and the error type is specified by SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOW | LABel | DATa | LABELANDDATA | EOW | ERRor | Search condition to use for the ARINC429 bus. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:CONDITION DATA SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:CONDITION? might return SOW, indicating that the bus is being searched for the first bit of each word in the packet.
Sets the high value used when searching on an ARINC429 data field. The search condition must be DATa or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | High value used for the ARINC429 data-field search. |
Sets or queries the qualifier used when searching on data in the DATA field for an ARINC429 bus signal. The search condition must be set to DATA or LABELANDDATA, and the qualifier applies only to the bits defined as the data field.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Data qualifier used for the search operation. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:DATA:QUALIFIER LESSTHAN sets the data qualifier to less than. SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:DATA:QUALIFIER? might return EQUAL, indicating that the data qualifier is set to equal.
Sets or queries the low value when searching on an ARINC429 data field. The search number is specified by x, and the search condition must be set to DATa or LABELANDDATA.
Sets or queries the error type when searching on an ARINC429 bus signal. The search number is specified by x, and the search condition must be set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | ANY | PARity | WORD | GAP | Error type to match when searching on the ARINC429 bus signal. |
enum - Returns the currently selected error type for the ARINC429 bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:ERRTYPE PARITY sets the error type to match on parity errors. SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:ERRTYPE? might return ANY, indicating that any error condition will produce a match.
Sets or queries the high value used when searching on an ARINC429 label field. The search condition must be LABel, and the label qualifier must be INrange or OUTrange.
Sets or queries the qualifier used when searching on ARINC429 bus label data. The search number is specified by x, and the search condition must be LABel or LABELANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for label searching. |
enum - Returns the current label search qualifier.
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:LABEL:QUALIFIER LESSTHAN
Sets or queries the low value when searching on an ARINC429 label field. The search number is specified by x, and the search condition must be set to LABel or LABELANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The label value. |
string - Returns the label value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:LABEL:VALUE "XXXX1010" SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:LABEL:VALUE?
Sets or queries the value used when searching on an ARINC429 SDI field. The search number is specified by x, and the search condition must be DATa or LABELANDDATA with the data format set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The SDI value. |
string - Returns the current SDI value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:SDI:VALUE "X0"
Sets or queries the label used when searching on an ARINC429 SSM field. The search number is specified by x, and the search condition must be DATa or LABELANDDATA with the data format set to DATA or SDIDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| label | string | - | Label value. |
string - Returns the label value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:SSM:VALUE "X0" sets the value to X0. SEARCH:SEARCH1:TRIGGER:A:BUS:ARINC429A:SSM:VALUE? might return "XX", indicating that the value is XX.
Sets or queries the condition used when searching on an audio bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | DATa | Condition to use for audio bus search: word select or start of frame, or matching data. |
enum - Returns the current audio bus search condition.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:CONDition SOF sets conditions to search on start of frame. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:CONDition? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:CONDITION DATA indicating settings for a search on DATA.
Sets or queries the binary data string for the high data word used when searching on an TDM audio bus signal. The search condition must be set to DATa using SEARCH:SEARCH{x}:TRIGger:A:BUS:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| data string | string | - | Binary data string for the high data word to be used when searching on an TDM audio bus signal. |
string - Returns the binary data string for the high data word.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:HITDMVALue "XXXXXXXXXXXXXXXXXXXX1100" SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:HITDMVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:HITDMVALUE "XXXXXXXXXXXXXXXXXXXX1010" indicating the high value is set to 1010.
Sets or queries the binary data string for the high data word used when searching on an audio bus signal. The search condition must be set to DATa using the corresponding BUS:AUDio condition command.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Specifies the upper word value. |
string - Returns the current high data word binary data string.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:HIVALue "XXXX" sets the HIVALUE to XXXX. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:HIVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:HIVALUE "TEST_001101", indicating the HIVALUE is set to TEST_001101.
Sets or queries the audio bus data offset value used for search and mark. Requires the SRAUDIO option.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | real | - | NR1 data offset value. |
real - Returns the current data offset value.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:OFFSet 2 SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:OFFSet?
Sets or queries the qualifier used when searching on an audio bus signal. The search condition must be set to DATA using the corresponding CONDITION command.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for audio bus search comparisons. |
enum - Returns the current qualifier setting.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:QUALifier LESSthan sets the qualifier to LESSthan. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:QUALifier? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:QUALIFIER EQUAL indicating the qualifier is set to EQUAL.
Sets or queries the binary data string for the single or low data word used when searching on a TDM audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH{x}:TRIGger:A:BUS:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string for the single or low data word used in the search. |
string - Returns the binary data string for the single or low data word used in the search.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:TDMVALue "1100" sets the TDMVALUE to 1100. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:TDMVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:TDMVALUE"XXXXXXXXXXXXXXXXXXXX1010", indicating the TDM value is 1010.
Sets or queries the binary data string for the single or low data word used when searching on an audio bus signal. The search condition must be set to DATA using the associated SEARCH condition command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string for the single or low data word used when searching on an audio bus signal. |
string - Returns the binary data string for the single or low data word used when searching on an audio bus signal.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:VALue "X0X011" sets the data value to X0X011. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:VALUE"XXXXXXXXXXXXXXXXXXXXXXXX", indicating the data value is set to XXXXXXXXXXXXXXXXXXXXXXXX.
Sets or queries the alignment of the data used when searching on a non-TDM type audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:NONTdm:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| alignment | enum | EITher | LEFt | RIGht | Aligns the data to either left or right, left, or right. |
enum - Returns the current data alignment setting.
SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:WORD LEFT aligns the data to the left. SEARCH:SEARCH1:TRIGger:A:BUS:AUDio:DATa:WORD? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUDIO:DATA:WORD EITHER indicating the data is aligned either to the left or right.
Sets or queries the field or condition to search for on an AutoEthernet signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SSD | SFD | MACADDRess | MACLENgth | IPHeader | TCPHeader | DATa | EOP | FCSError | QTAG | Search field or condition for AutoEthernet. |
enum - Returns the currently selected AutoEthernet search field or condition.
Sets or queries the binary data value used when searching on an AutoEthernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Binary data value to use when searching on an AutoEthernet bus signal. |
string - Returns the currently specified binary data value.
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue "101011" SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:DATA:HIVALUE "10110".
Sets or queries the data offset value, in bytes, to use when searching on the AutoEthernet data field. The search condition must be set to DATA.
returns (bytes) - Returns the current data offset value, in bytes.
Sets or queries the length of the data string, in bytes, used when searching on the AutoEthernet bus signal. The search condition must be set to DATa and the search number is given by SEARCH<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search number. |
| length | integer | 1 - 16 | Data length to use when searching on the AutoEthernet data field. |
integer (bytes) - Returns the data length, in bytes, used when searching on the AutoEthernet data field.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:DATA:SIZE 4 specifies 4 as the number of contiguous TCP/IPv4/MAC client bytes to use when searching on the AutoEthernet data field.
Sets or queries the binary value used when searching on the AutoEthernet bus signal. The search condition must be set to DATa.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary string containing the value to use for AutoEthernet bus search; allowable characters are 0, 1, and X. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:DATA:VALUE "00001000" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:DATA:VALUE?
Sets the header type used when triggering on an Auto Ethernet bus signal. The available header types are TCP, ICMP, and UDP.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Search number. |
| header type | enum | TCP | ICMP | UDP | Header type to select. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer ICMP SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer?
Sets the Ether Type used when triggering on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| type | enum | IPV4 | IPV6 | Specifies the ether type as IPv4 or IPv6. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe IPV4 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe?
Sets or queries the error type used when searching on an AutoEthernet bus signal. The search number <x> identifies which search setup is affected.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CRC | ESDERR | ESDJAB | CHECKSUM | ANY | Specifies the AutoEthernet error type. |
enum - Returns the current AutoEthernet error type for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe ESDJAB SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe?
Sets or queries the AutoEthernet error type used when searching on a search list entry. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CRC | ESDERR | ESDJAB | CHECKSUM | ANY | Error type for the AutoEthernet search condition. |
enum - Returns the current AutoEthernet error type for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe ESDJAB SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe? might return SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe ESDERR, indicating the error type for search 1 is set to ESDERR.
Sets or queries the binary destination address value used when searching on an AutoEthernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters that sets the IP address; allowable characters are 0, 1, and X. |
string - Returns the binary destination address value as a quoted string of up to 32 characters.
Sets or queries the binary destination address value used when searching on an AutoEthernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | A quoted string of up to 32 characters that sets the IP address, using only 0, 1, and X characters; specified bits replace the least significant bits and unspecified upper bits remain unchanged. |
Sets or queries the binary protocol value used when searching on the Ethernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to eight characters containing 0, 1, and X; unspecified upper bits remain unchanged. |
string - Returns the binary protocol value currently set for the AutoEthernet IP header protocol field. It may return a quoted string such as "XXXXXXXX" to indicate don't care.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:IPHEADER:PROTOCOL:VALUE "01010010" specifies SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:IPHEADER:PROTOCOL:VALUE? might return
Sets or queries the binary protocol value used when searching on the Ethernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary string of up to eight characters using 0, 1, and X; unspecified upper bits remain unchanged. |
string - Returns the binary protocol value as a quoted string, with X representing don’t care bits.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:IPHEADER:PROTOCOL:VALUE "01010010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:IPHEADER:PROTOCOL:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:IPHEADER:PROTOCOL:VALUE "XXXXXXXX", indicating that the trigger value has been set to "don’t care".
Sets or queries the binary source address value used when searching on an AutoEthernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary string value to use for the search source address. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOEthernet:IPHEADER:SOURCEADDR:VALUE "01010010"
Sets or queries the binary source address value to use when searching on an AutoEthernet bus signal. The search condition must be set to IPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to eight characters; allowable characters are 0, 1, and X, with unspecified upper bits left unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:IPHEADER:SOURCEADDR:VALUE "01010010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:IPHEADER:SOURCEADDR:VALUE?
Sets or queries the binary MAC address destination value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Search number. |
| QString | string | - | Quoted binary string value up to 48 characters; allowable characters are 0, 1, and X. |
string - Returns the current quoted binary MAC destination value set for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:MAC:ADDRESS:DESTINATION:VALUE SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:MAC:ADDRESS:DESTINATION:VALUE?
Sets or queries the binary MAC address destination value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search number. |
| value | string | - | Quoted binary string value, up to 48 characters, using 0, 1, and X; specified bits replace the least significant bits and unspecified upper bits remain unchanged. |
string - Quoted binary MAC address destination value currently set for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:ADDRESS:DESTINATION:VALUE "XXXXXXXX0011010111111100000001111010101011001000" specifies to use the value of XX:35:FC:07:AA:C8 hex when searching on the Ethernet MAC address destination field.
Sets or queries the binary MAC address source value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 48 characters containing 0, 1, and X; unspecified upper bits remain unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:ADDRESS:SOURCE:VALUE "XXXXXXXX0011010111111100000001111010101011001000"
Sets or queries the binary MAC address source value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted binary string of up to 48 characters; allowable characters are 0, 1, and X. |
string - Returns the binary MAC address source value as a quoted string of up to 48 characters containing 0, 1, and X.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:ADDRESS:SOURCE:VALUE "XXXXXXXX0011010111111100000001111010101011001000" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:ADDRESS:SOURCE:VALUE?
Sets or queries the binary MAC length high value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
Sets or queries the binary MAC length high value used when searching on an AutoEthernet bus signal. The search condition must be set to MACADDRess.
Sets or queries the MAC length value used when searching on an Ethernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 16 characters; allowable characters are 0, 1, and X. |
string - Returns the MAC length value as a quoted string of up to 16 characters; allowable characters are 0, 1, and X.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:LENGTH:HIVALUE"XXXXXXXX00001000" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:LENGTH:HIVALUE? might return
Sets or queries the MAC length value used when searching on an Ethernet bus signal. The search condition must be set to MACADDRess.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 16 characters using 0, 1, and X; specified bits replace the least significant bits. |
string - Returns the current MAC length value as a quoted string of up to 16 characters using 0, 1, and X.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:LENGTH:HIVALUE"XXXXXXXX00001000" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:MAC:LENGTH:HIVALUE? might return
Sets the length of the data string, in bytes, used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
| Name | Type | Values | Description |
|---|---|---|---|
| length | integer | 1 - 16 | Sets the payload length in bytes. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe 2 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe?
Sets the payload length, in bytes, used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON. The query returns the currently set payload length.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - 16 | Sets the payload length in bytes. |
integer (bytes) - Returns the payload length in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe 2 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe?
Sets the payload value used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of 0, 1, and X characters; the number of characters depends on the payload size setting and unspecified upper bits remain unchanged. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue 00000011 sets the payload value for search 1 to 00000011.
Sets the payload value used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON. The value is a quoted string of 0, 1, and X characters, and its length depends on the payload size setting.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted payload bit pattern using 0, 1, and X characters. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue 00000011 sets the payload value for search 1 to 00000011.
Sets or queries the binary Q-tag information used when searching on an AutoEthernet bus signal. The search condition must be set to QTAG.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOEthernet:QTAG:VALUE"XXXXXXXXXXXXXXXXXXXX010010001010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOEthernet:QTAG:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOEthernet:QTAG:VALUE"XXXXXXXXXXXXXXXXXXXX010010001010",
Sets or queries the binary Q-tag information used when searching on an AutoEthernet bus signal. The search condition needs to be set to QTAG.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
returns
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:QTAG:VALUE"XXXXXXXXXXXXXXXXXXXX010010001010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:QTAG:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:QTAG:VALUE"XXXXXXXXXXXXXXXXXXXX010010001010",
Sets or queries the qualifier used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for the AutoEthernet bus search condition. |
enum - Returns the current qualifier used for AutoEthernet bus searching.
Sets or queries the qualifier used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
enum - Returns the current AutoEthernet search qualifier.
Sets the length of the data pattern, in bytes, used when triggering on an Auto Ethernet bus signal at 10 Base-T1S with packet view off.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 16 | Sets the data length, in bytes. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth 2 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth?
Sets the length of the data pattern, in bytes, used when triggering on an Auto Ethernet bus signal at 10 Base-T1S with packet view off. Requires option SR-AUTOEN1.
| Name | Type | Values | Description |
|---|---|---|---|
| length | integer | 1 - 16 | Sets the data length in bytes. |
integer (bytes) - Returns the current data length in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOEthernet:TBT1s:DATa:LENgth 2 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOEthernet:TBT1s:DATa:LENgth?
Sets the data value used for triggering on an Auto Ethernet bus signal when the speed is 10 Base-T1S and packet view is off. The value is provided as a quoted string of 0, 1, and X characters, with length determined by the corresponding data length setting.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string containing the data value to use for triggering. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue 00000011 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue?
Sets the data value string used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is OFF. The quoted string may contain 0, 1, and X characters and replaces the least significant bits specified.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted data string used as the trigger data value. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue 00000011 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue?
Sets or queries the binary ACK number value used when searching on an AutoEthernet bus signal. The default is all X's (don't care), and the search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string containing the binary ACK number pattern. |
Sets or queries the binary ACK number value used when searching on an AutoEthernet bus signal. The default is all X's (don't care), and the search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string containing the binary ACK number value. |
SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue 00000011 SEARCH:SEARCH1:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
Sets or queries the binary destination port value used when searching on the AutoEthernet TCP header destination port number. The search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted binary string value, up to 16 characters, using 0, 1, and X; specified bits replace the least significant bits and unspecified upper bits remain unchanged. |
string - Returns the configured quoted binary destination port value.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:DESTINATIONPORT:VALUE "XXXXXXXX00100010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:DESTINATIONPORT:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:DESTINATIONPORT:VALUE "XXXXXXXX00100010"
Sets or queries the binary destination port value used when searching on the AutoEthernet TCP header destination port number. The search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary string of up to 16 characters using 0, 1, and X; specified bits replace the least significant bits. |
string - Returns the currently specified destination port value as a quoted binary string.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:DESTINATIONPORT:VALUE "XXXXXXXX00100010" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:DESTINATIONPORT:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:VALUE "XXXXXXXX00100010", indicating that hexadecimal XX22 has been set as the value to use when searching on the AutoEthernet TCP header destination port number.
Sets or queries the TCP header sequence number value used when searching on the AutoEthernet TCP header destination port number. The search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | A quoted string of up to 32 characters using 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
string - Returns the TCP header sequence number value used for the search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALU "XXXXXXXXXXXXXXXXXXXX000100010001" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALUE "XXXXXXXXXXXXXXXXXXXXXX0010010100"
Sets or queries the TCP header sequence number value used when searching on the AutoEthernet TCP header destination port number. The search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
string - Returns the TCP header sequence number value currently specified for the AutoEthernet TCP header search.
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALUE "XXXXXXXXXXXXXXXXXXXX000100010001" SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOETHERnet:TCPHEADER:SEQNUM:VALUE "XXXXXXXXXXXXXXXXXXXXXX0010010100"
Sets or queries the binary source port value used when searching on an AutoEthernet bus signal. The search condition must be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
Sets or queries the binary source port value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to TCPHeader.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits, leaving unspecified upper bits unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:AUTOethernet:TCPHEADER:SOURceport:VALUE?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPeset / query
Sets or queries the trigger condition for a CAN bus on the ADS bits. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ADH | DH1 | DH2 | DL1 | ADS Type for a CAN bus: Arbitration to Data high, Data High bit 1, Data High bit 2, or Data Low bit 1. |
enum - Returns the current ADS Type setting for the CAN bus trigger condition.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe ADH SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe DH2
Sets or queries the trigger condition for a CAN bus on the ADS bits. The search number is specified by x.
enum - Returns the current ADS Type setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe ADH SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CAN:ADS:TYPe DH2
Sets or queries the search condition for a CAN bus. The search number is specified by x.
enum - Returns the current CAN bus search condition.
Sets or queries the search condition for a CAN bus. The search number is specified by x.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCTypeset / query
Specifies the CAN XL trigger CRC type for search number x, valid on PCRC and FCRC. Requires option SRAUTO.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PCRC | FCRC | Selects the CAN XL trigger CRC type. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:CRCType PCRC SEARCH:SEARCH1:TRIGger:A:BUS:CAN:CRCType?
Specifies the CAN XL trigger CRC type for the selected search number. This setting is valid on PCRC and FCRC and requires option SRAUTO.
enum - Returns the current CAN XL trigger CRC type.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:CRCType PCRC SEARCH:SEARCH1:TRIGger:A:BUS:CAN:CRCType?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPeset / query
Sets or queries the trigger condition for a CAN bus on the DAS bits. The search number is specified by x and the command requires option SRAUTO.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DAH | AH1 | AH2 | AL1 | Specifies the DAS type. |
enum - Returns the current DAS type setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DAS:TYPe DAH sets the DAS type as Data to Arbitration High bit. SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DAS:TYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DAS:TYPe DAH, indicating the DAS type is Data to Arbitration High bit.
Sets or queries the trigger condition for a CAN bus on the DAS bits. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DAH | AH1 | AH2 | AL1 | DAS type to use. |
enum - Returns the current DAS type setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DAS:TYPe DAH SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DAS:TYPe?
Specifies the CAN search type to be valid on a Read, Write, or Either condition for search number x. Requires the SRAUTO option.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | READ | WRITE | NOCARE | Selects the CAN data direction to search for. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:DIRection READ SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:DIRection?
Specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.
enum - Returns the current CAN data direction setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:DIRection READ SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:DIRection?
Sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x, and the search condition must be set to DATA or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | -1 - 7 | Integer data offset value in bytes; the minimum and default are -1 (don't care), and the maximum is up to 7 for CAN 2.0 or up to 63 for ISO CAN FD and Non-ISO CAN FD, depending on match size and CAN standard. |
integer (bytes) - Returns the CAN data offset value in bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET 5 SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET?
Sets or queries the CAN data offset value, in bytes, used when searching on the CAN data field. The search number is specified by x, and the search condition must be set to DATA or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 - 7 | Data offset value in bytes to use for CAN data field searching. |
integer (bytes) - Returns the CAN data offset in bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET 5 SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:DATA:OFFSET?
Sets or queries the CAN bus trigger data qualifier used when searching on a CAN bus signal. The search number is specified by x.
Sets or queries the CAN bus trigger data qualifier to use when searching on a CAN bus signal. The search number is specified by x.
Sets or queries the length of the data string, in bytes, used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Specifies the data size. |
integer - Returns the data size in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:SIZe 1 SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:SIZe?
Sets or queries the length of the data string, in bytes, used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Specifies the data size. |
integer - Returns the data size in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:SIZe 1 SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:SIZe?
Sets the binary data value used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - |
Sets the binary data value used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data value to use for the CAN search. |
Sets or queries the trigger condition for a CAN bus on the XL Data bits. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AF | VCID | SDT | SEC | SBC | ADS | DAS | Specifies the XL bit type. |
enum - Returns the current XL bit type setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:XLBITType AF SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:XLBITType?
Sets or queries the trigger condition for a CAN bus on the XL Data bits. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AF | VCID | SDT | SEC | SBC | ADS | DAS | Specifies the XL bit type. |
enum - Returns the selected XL bit type.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:XLBITType AF SEARCH:SEARCH1:TRIGger:A:BUS:CAN:DATa:XLBITType?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRTypeset / query
Sets or queries the CAN bus error type used for a search condition. The search number is specified by x, and the search condition must be set to ERRor.
Sets or queries the type of CAN bus error condition to search on. The search number is specified by x and the search condition must be set to ERRor.
Sets or queries the value of the CAN FD bit rate switch bit (BRS bit) used for a search condition. The search number is specified by x, and the search condition must be set to FDBITS with CAN standard FDISO or FDNONISO.
enum - Returns the current BRS bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:BRSBit ONE SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:BRSBIT?
Sets or queries the CAN FD bit rate switch (BRS) bit value used for bus search filtering. The search number is specified by x, and the search condition must be FDBITS with CAN standard FDISO or FDNONISO.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether to filter on BRS bit value 1, 0, or not care. |
enum - Returns the current BRS bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:BRSBIT ONE SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:BRSBIT? might return NOCARE
Sets or queries the value of the error state indicator (ESI) bit for a CAN bus search. The search number is specified by x, and the search condition must be FDBITS with CAN standard FDISO or FDNONISO.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filters CAN FD packets based on the ESI bit value. |
enum - Returns the current ESI-bit filter setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBit ONE SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBIT?
Sets or queries the ESI bit filter value for a CAN bus search. The search condition must be FDBITS and the CAN standard must be FDISO or FDNONISO.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filters CAN FD packets by ESI bit value, or disables ESI-bit filtering. |
enum - Returns the current ESI bit filter state.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBit ONE SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBIT?
Sets or queries the CAN bus trigger frame type used when searching on a CAN bus signal. The search condition must be set to FRAMEtype, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | DATa | ERRor | OVERLoad | REMote | xldata | Frame type to use for the CAN bus search trigger. |
Sets or queries the CAN bus trigger frame type used when searching on a CAN bus signal. The search condition must be set to FRAMEtype.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DATa | ERRor | OVERLoad | REMote | xldata | CAN bus frame type to use for the search trigger. |
Sets or queries the CAN bus trigger identifier mode used when searching on a CAN bus signal. The search number is specified by x, and the search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EXTENDed | STandard | Selects the identifier mode. |
enum - Returns the current CAN bus trigger identifier mode.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:IDentifier:MODe EXTEND sets the identifier mode to extended. SEARCH:SEARCH1:TRIGger:A:BUS:CAN:IDentifier:MODe? might return SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:IDENTIFIER:MODE STANDARD, indicating the identifier mode is set to standard.
Sets or queries the CAN bus trigger identifier mode used when searching on a CAN bus signal. The search number is specified by x, and the search condition must be set to IDANDDATA or DATA.
enum - Returns the current CAN bus trigger identifier mode.
Sets or queries the CAN bus trigger identifier value used when searching on a CAN bus signal. The search number is specified by x, and the search condition must be IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:IDentifier:VALue "1010" sets the identifier value to 1010.
Sets or queries the CAN bus trigger identifier (address) value used when searching on a CAN bus signal. The search number is specified by x, and the search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:IDentifier:VALue "1010" sets the identifier value to 1010.
Sets the length of the data string, in bytes, used when triggering on a CAN bus signal. The trigger condition must be set to Priority Identifier; the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Specifies the data size. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:SIZe?
Sets the length of the data string, in bytes, used when triggering on a CAN bus signal. The trigger condition must be set to Priority Identifier; the search number is specified by x.
integer - Returns the data size setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:SIZe?
Sets the binary data value to use when triggering on a CAN bus signal when standard is XL. The trigger condition must be set to Priority Identifier, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:VALue "1010" specifies the identifier value as 1010.
Sets the binary data value used when triggering on a CAN bus signal when standard is XL. The trigger condition must be set to Priority Identifier.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
string - Returns the identifier value set for the priority identifier trigger.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:VALue "1010" specifies the identifier value as 1010. SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue "101011", indicating the identifier value is set to 101011.
Sets or queries the length of the data string, in bytes, used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Specifies the data size. |
integer - Returns the current data size in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:XLDATa:SIZe 2 specifies the data size as 2. SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:XLDATa:SIZe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:XLDATa:SIZe 1, indicating the data size is set to 1.
Sets or queries the length of the CAN bus data string, in bytes, used when searching on a CAN bus signal. The search condition must be IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| data size | integer | - | Specifies the data size. |
integer - Returns the data size setting.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:XLDATa:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:XLDATa:SIZe?
Sets or queries the binary data value used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value to use when searching on a CAN bus signal. |
string - Returns the binary data value set for the CAN bus search.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:VALue "1111" specifies the data value as 1111. SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue"1010", indicating the data value is set to 1010.
Sets or queries the binary data value used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data value to use for the CAN bus search. |
string - The current binary data value.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:PIDentifier:VALue "1111" specifies the data value as 1111. SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:PIDentifier:VALue"1010", indicating the data value is set to 1010.
Sets or queries the identifier value for the CPHY blue search field. The default blue value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the currently specified identifier value within a CPHY frame to search on.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:BLUe:VALue "BE4" SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:BLUe:VALue?
Sets or queries the blue value identifier used for CPHY bus search. The default blue value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value to search on. |
string - Returns the currently specified blue value identifier.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:BLUe:VALue "BE4" SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:BLUe:VALue?
Sets or queries the trigger condition for a CPHY bus. The default trigger condition is SOT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SOT | EOT | DATa | EOTPDATa | OPTIONALPARam | SCRambling | COMPression | PACKets | BUSTURNAROUnd | ESCAPEMODe | STop | ERRors | MODe | WORD | SYMBol | Selects the CPHY frame field or condition used for searching. |
Sets or queries the trigger condition for a CPHY bus. The default trigger on condition is SOT.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOT | EOT | DATa | EOTPDATa | OPTIONALPARam | SCRambling | COMPression | PACKets | BUSTURNAROUnd | ESCAPEMODe | STop | ERRors | MODe | WORD | SYMBol | Trigger condition to search on for the CPHY frame. |
Specifies the length of the CPHY trigger data string in bytes when the trigger condition is DATA. The default data size is 1 byte, and valid values range from 1 to 5.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 5 | Data size in bytes to use for the CPHY trigger. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:DATa:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:DATa:SIZe?
Specifies the length of the data string in bytes to be used for a CPHY trigger when the trigger condition is DATA. The default data size is 1 byte and the allowed range is 1 to 5.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 5 | Data size in bytes for the CPHY trigger data string. |
integer - Returns the current data size in bytes.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:DATa:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:DATa:SIZe?
This command specifies the binary data string used for CPHY triggering if the trigger condition is DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string used for CPHY triggering. |
Specifies the binary data string used for CPHY triggering when the trigger condition is DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string used for the CPHY trigger. |
Sets or queries the error type for CPHY bus. The default error type condition is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | ECC | CRC | Selects the CPHY error type condition to search on. |
enum - Returns the currently specified CPHY error type condition.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:ERRor:TYPe ECC SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:ERRor:TYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:ERRor:TYPe ECC
Sets or queries the error type for CPHY bus search. The default error type condition is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | ECC | CRC | Error type condition to search for in the CPHY frame. |
enum - Returns the currently specified error type for the CPHY bus search.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:ERRor:TYPe ECC SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:ERRor:TYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:ERRor:TYPe ECC, indicating that ECC is the currently specified field within a CPHY frame to search on.
Sets or queries the escape mode command type for CPHY bus. Requires option SR-CPHY.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LPDT | ULPS | RESETTRIGger | ANY | Escape mode command type. |
enum - Returns the current escape mode command type for CPHY bus.
Sets or queries the escape mode command type for CPHY bus. The default is not stated in the slice.
enum - Returns the currently specified escape mode command type for the CPHY bus.
Specifies the green data string used for CPHY triggering when the trigger condition is on an RGB packet. The default green value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the green string. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:GREen:VALue "243" specifies 243 as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:GREen:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:GREen:VALue "243", indicating that 243 is the currently specified field within a CPHY frame to search on.
Sets or queries the mode type for CPHY bus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HS | LP | Mode type for CPHY bus. |
Sets or queries the packet list for CPHY bus search. The default packet list condition is VSYNCSTART.
| Name | Type | Values | Description |
|---|---|---|---|
| packet | enum | VSYNCSTART | VSYNCEND | HSYNCSTART | HSYNCEND | EOTP | COLOROFF | COLORON | SHUTDOWN | TURNON | GSW | GR | COMPRESSION | SCRAMBLING | EXECUTEQUEue | DCSSW | DCSR | GLONGWRITE | DSINULL | DSIBLANk | MAXRETSIZE | DCSGLONGWRITE | PICPARameter | COMPRESSEDPSTReam | PPS101010 | PPS121212 | PPS565 | PPS666 | LPS666 | PPS888 | YCBCR24 | LPYCBCR24 | YCBCR16 | YCBCR12 | ACKNowledge | ERRORREPort | GSRR | GLONGREAD | DCSLONGREAD | DCSSRR | FRAMESTARt | FRAMEEND | LINESTARt | LINEEND | GSP | CSINULL | CSIBLANk | EMBEDDED | USEREIGHTB | RGB565 | RGB555 | RGB444 | RGB666 | RAW6 | RAW7 | RAW8 | RAW10 | RAW12 | RAW14 | RAW16 | RAW20 | RGB888 | YUV420L8 | YUV8BIT | YUV422B10 | YUV420B10 | Packet within the CPHY frame to search on. |
enum - Returns the currently specified packet list condition for the CPHY bus search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST{VSYNCSTART| VSYNCEND| HSYNCSTART| HSYNCEND| EOTP| ... }
SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?Sets or queries the packet type for CPHY bus search. The default packet type condition is SHORt.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | SHORt | LONG | Packet type to search on. |
enum - Returns the currently specified packet type for the CPHY frame search.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:PACKets:TYPe LONG SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:PACKets:TYPe?
Specifies the pixel number to be used for CPHY triggering when the trigger condition is on pixel number pattern. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 | Specifies the pixel number. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:PIXel:NUMBer 1234 SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:PIXel:NUMBer?
Sets or queries the search pattern type for a CPHY bus. The default search pattern type is PIXELVALue.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PIXELVALue | PIXELNUMBer | Search pattern type used for CPHY bus triggering. |
enum - Returns the currently specified search pattern type for the CPHY bus.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion PIXELNUMBer SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:PIXel:SEARCHOPTion?
Specifies the red data string used for CPHY triggering when the trigger condition is on RGB packet.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value used as the red data string. |
Specifies the length of the data string in bytes to be used for a CPHY trigger when the trigger condition is SYMBOL. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 14 | Length of the data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:SYMBol:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:SYMBol:SIZe?
Specifies the binary data string used for CPHY triggering when the trigger condition is SYMBol. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string to use for CPHY triggering. |
string - Returns the currently specified binary data string used for CPHY triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:SYMBol:VALue "11110000" SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:SYMBol:VALue?
Specifies the word count data string used for CPHY triggering when the trigger condition is on any rgb/ycbcr/yuv packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string used for the word count search. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue "0003" specifies 0003 as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue "0003", indicating that 0003 is the currently specified field within a CPHY frame to search on.
Specifies the length of the word string in bytes to be used for a CPHY trigger when the trigger condition is WORD. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 5 | Specifies the length of the data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORD:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:WORD:SIZe?
Specifies the binary data string used for CPHY triggering when the trigger condition is Word. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string to use for CPHY triggering. |
string - Returns the currently specified binary data string for the selected CPHY trigger word value.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORD:VALue "11110000" specifies 11110000 as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORD:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:WORD:VALue "11110000", indicating that 11110000 is the currently specified field within a CPHY frame to search on.
Specifies the Cb data string used for CPHY triggering when the trigger condition is on a YCbCr packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:CB "1BA" SEARCH:SEARCH1:TRIGGER:A:BUS:CPHY:YCBCR:CB?
Specifies the Cr data string used for CPHY triggering when the trigger condition is on a YCbCr packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - The current Cr identifier value.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:CR "2EE" SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:CR?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Yset / query
Specifies the identifier value for CPHY YCBCR Y search triggering. The default YCBCR packet Y value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value to search on. |
string - Returns the currently specified identifier value for the CPHY YCBCR Y search field.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:Y "1AA" specifies 1AA as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:Y? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YCBCR:Y "1AA", indicating that 1AA is the currently specified field within a CPHY frame to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Uset / query
Specifies the U data string used for CPHY triggering when the trigger condition is on a YUV packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:U "123" specifies 123 as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:U? might return :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:U "123", indicating that 123 is the currently specified field within a CPHY frame to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Vset / query
Sets or queries the Y data string used for CPHY triggering when the trigger condition is on YUV packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Identifier value. |
string - The currently specified YUV packet Y value.
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y "81A" specifies 12A as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y "81A", indicating that 81A is the currently specified field within a CPHY frame to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Yset / query
Specifies the Y data string used for CPHY triggering when the trigger condition is on a YUV packet. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y "81A" specifies 12A as the field within a CPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y? might return :SEARCH:SEARCH1:TRIGger:A:BUS:CPHY:YUV:Y "81A", indicating that 81A is the currently specified field within a CPHY frame to search on.
Sets or queries the trigger condition for a CXPI bus search. The search number is specified by x.
returns
Specifies the binary counter string used for CXPI triggering when the trigger condition is COUNTER. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary counter string. |
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:COUNter:VALue "01" specifies the binary counter string used for CXPI triggering if the trigger condition is COUNTER as "01". SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:COUNter:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:COUNter:VALue "01", indicating the binary counter string used for CXPI triggering if the trigger condition is COUNTER is "01".
Specifies the length of the data string in bytes to be used for CXPI triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 5 | Data size in bytes. |
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DATa:SIZe 4 SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DATa:SIZe?
Specifies the binary data string used for CXPI triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string used for CXPI triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DATa:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DATa:VALue?
Sets or queries the identifier value used for CXPI triggering. The default size and value of DLC are 4 bits and "XXXX" respectively.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DLC:VALue "110" SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:DLC:VALue?
Sets or queries the Error Type in CXPI bus for the specified search number. The error type can be CRC, PARity, FRAMe, IBS, or ANY.
enum - Returns the selected CXPI error type.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:ERROR:TYPe CRC SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:ERROR:TYPe?
Sets or queries the binary identifier value used for CXPI triggering when the trigger condition is Ext DLC. The default size and value of Ext DLC are 8 bits and "XXXX XXXX" respectively.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value for the Ext DLC trigger setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:EXTDLC:VALue "11010010" specifies the binary DLC string used for SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:EXTDLC:VALue? might
Sets or queries the frame type in CXPI bus. The search number is specified by x.
Sets or queries the CXPI frame type for the specified search number. The default frame type is normal.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NORMal | SLEep | LONG | POLLINGNORMal | POLLINGLONG | Packet type CXPI frame to search on. |
enum - Returns the current CXPI frame type for the specified search number.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:FRAMe:TYPe SLEep SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:FRAMe:TYPe?
Sets or queries the Sleep Status in CXPI bus for the specified search number x. Requires option SR-CXPI.
enum - Returns the Sleep Status in CXPI bus.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:NETMN:SLEEPIND OFF SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:NETMN:SLEEPIND?
Sets or queries the Wakeup Status indication for CXPI search triggering. Requires option SR-CXPI.
enum - Returns the current Wakeup Status indication.
SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:NETMN:WAKEUPIND ON SEARCH:SEARCH1:TRIGGER:A:BUS:CXPI:NETMN:WAKEUPIND?
Specifies the blue data string used for DPHY triggering when the trigger condition is on RGB packet.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value for the blue field. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:BLUe:VALue "BE4" SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:BLUe:VALue?
Sets or queries the trigger condition for a DPHY bus. The default trigger-on condition is SOT.
Specifies the length of the data string in bytes to be used for a DPHY trigger if the trigger condition is DATA. The default data size is 1 byte and the valid range is 1 to 5.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 5 | Length of the data string in bytes. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1> SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:DATa:SIZe?
Specifies the binary data string used for DPHY triggering when the trigger condition is DATA. The default identifier value is XXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value used for DPHY triggering. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:DATa:VALue "11110000" SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:DATa:VALue?
Sets or queries the error type for DPHY bus triggering. The default error type condition is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | ECC | CRC | Selects the DPHY error type condition. |
Sets or queries the escape mode command type for DPHY bus. Requires option SR-DPHY.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LPDT | ULPS | RESETTRIGger | ANY | Specifies the escape mode command type to search on. |
enum - Returns the currently specified escape mode command type for the DPHY bus.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand ULPS SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
Specifies the green data string used for DPHY triggering when the trigger condition is on an RGB packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Green data string used for DPHY triggering. |
Sets or queries the mode type for DPHY bus. The default mode type condition is HS.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HS | LP | Specifies the mode within a DPHY frame to search on. |
enum - Returns the currently specified mode type within a DPHY frame to search on.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:MODe:TYPe LP SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:MODe:TYPe?
Sets or queries the packet list for DPHY bus search. The default packet list condition is VSYNCSTART.
| Name | Type | Values | Description |
|---|---|---|---|
| packet | enum | VSYNCSTART | VSYNCEND | HSYNCSTART | HSYNCEND | EOTP | COLOROFF | COLORON | SHUTDOWN | TURNON | GSW | GR | COMPRESSION | SCRAMBLING | EXECUTEQUEue | DCSSW | DCSR | GLONGWRITE | DSINULL | DSIBLANk | MAXRETSIZE | DCSGLONGWRITE | PICPARameter | COMPRESSEDPSTReam | PPS101010 | PPS121212 | PPS565 | PPS666 | LPS666 | PPS888 | YCBCR24 | LPYCBCR24 | YCBCR16 | YCBCR12 | ACKNowledge | ERRORREPort | GSRR | GLONGREAD | DCSLONGREAD | DCSSRR | FRAMESTARt | FRAMEEND | LINESTARt | LINEEND | GSP | CSINULL | CSIBLANk | EMBEDDED | USEREIGHTB | RGB565 | RGB555 | RGB444 | RGB666 | RAW6 | RAW7 | RAW8 | RAW10 | RAW12 | RAW14 | RAW16 | RAW20 | RGB888 | YUV420L8 | YUV8BIT | YUV422B10 | YUV420B10 | Packet within the DPHY frame to search on. |
enum - Returns the currently specified packet list for the DPHY frame search.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:PACKets:LIST VSYNCSTART
Sets or queries the packet type for DPHY bus search/triggering. The default packet type condition is SHORt.
| Name | Type | Values | Description |
|---|---|---|---|
| packet type | enum | SHORt | LONG | Specifies the packet type field within a DPHY frame to search on. |
enum - Returns the currently specified packet type for the DPHY frame search.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:PACKets:TYPe LONG SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:PACKets:TYPe?
Specifies the pixel number to use for DPHY triggering when the trigger condition is on pixel number pattern. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 | Specifies the pixel number. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:PIXel:NUMBer 1234
Sets or queries the search pattern type for a DPHY bus. The default search pattern type is PIXELVALue.
| Name | Type | Values | Description |
|---|---|---|---|
| pattern type | enum | PIXELVALue | PIXELNUMBer | Selects which DPHY pixel field is used for search. |
enum - Returns the currently specified search pattern type for the DPHY bus.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion PIXELNUMBer SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:PIXel:SEARCHOPTion?
Specifies the red data string used for DPHY triggering if the trigger condition is on an RGB packet. The default red value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the red field. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:RED:VALue "1A1"
Specifies the word count data string used for DPHY triggering when the trigger condition is set on any pixel packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the word count data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue "0003" SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:WORDCOUNt:VALue?
Specifies the word count data string used for DPHY triggering when the trigger condition is set on any pixel packet. Requires the SR-DPHY option.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value for the DPHY word count search. |
string - Returns the currently specified word count identifier value.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue "0003" SEARCH:SEARCH1:TRIGGER:A:BUS:DPHY:WORDCOUNt:VALue?
Specifies the Cb data string used for DPHY triggering when the trigger condition is on a YCbCr packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CB "1BA" specifies 1BA as the field within a DPHY frame to search on.
Specifies the Cb data string used for DPHY triggering when the trigger condition is on a YCbCr packet.
string - Returns the currently specified Cb data string for DPHY triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CB "1BA" specifies 1BA as the field within a DPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CB? might return :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CB "1BA", indicating that 1BA is the currently specified field within a DPHY frame to search on.
Specifies the Cr data string used for DPHY triggering when the trigger condition is on a YCbCr packet. The argument is an identifier value.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the YCbCr Cr field. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CR "2EE" specifies 2EE as the field within a DPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CR? might return :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CR "2EE", indicating that 2EE is the currently specified field within a DPHY frame to search on.
Specifies the Cr data string used for DPHY triggering when the trigger condition is on a YCbCr packet. The argument is an identifier string and the default value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the Cr data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CR "2EE" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:CR?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Yset / query
Specifies the Y data string used for DPHY triggering when the trigger condition is on a YCbCr packet. It is available only with option SR-DPHY.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value to use for the YCbCr packet Y field. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:Y "1AA"
Specifies the Y data string used for DPHY triggering when the trigger condition is on a YCbCr packet. Requires option SR-DPHY.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The identifier value. |
string - Returns the currently specified Y data string for the DPHY frame search. The manual shows responses in the form :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:Y "1AA".
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:Y "1AA" specifies 1AA asthe field within a DPHY frame to search SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:Y? might return :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YCBCR:Y "1AA", indicating that 1AA is the currently specified field within a DPHY frame to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Uset / query
Specifies the U data string used for DPHY triggering when the trigger condition is on a YUV packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the U data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:U "123" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:U?
Specifies the U data string used for DPHY triggering when the trigger condition is on a YUV packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The identifier value. |
string - The currently specified U data string.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:U "123" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:U?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Vset / query
Specifies the V data string used for DPHY triggering when the trigger condition is on a YUV packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value to use for the V field. |
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:V "12A" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:V?
Specifies the V data string used for DPHY triggering when the trigger condition is on a YUV packet.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value for the YUV packet V field. |
string - Returns the currently specified V data string for the DPHY YUV trigger field.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:V "12A" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:V?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Yset / query
Sets or queries the YUV packets Y value for a DPHY frame search. The default Y value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value to search on. |
string - Returns the currently specified identifier value.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:Y "81A" specifies 12A as the field within a DPHY frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:Y? might return :SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:Y "81A", indicating that 81A is the currently specified field within a DPHY frame to search on.
Sets or queries the identifier value used for YUV packet Y search in a DPHY trigger. The default YUV packets Y value is XXXXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The identifier value. |
string - Returns the currently specified identifier value for the YUV packets Y search.
SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:Y "81A" SEARCH:SEARCH1:TRIGger:A:BUS:DPHY:YUV:Y?
Sets or queries the binary data string used for ESPI triggering when the trigger condition is Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
string - Returns the identifier value currently specified for ESPI address triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:ESPI:ADDRess:VALue "0111101101011010" specifies 0111101101011010 as the field within a ESPI frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ADDRess:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:ESPI:ADDRess:VALue "0111101101011010", indicating that 0111101101011010 is the currently specified field within a ESPI frame to search on.
Sets or queries the binary data string used for ESPI triggering when the trigger condition is Address. The search number is specified by x.
string - Returns the currently specified binary data string used for ESPI triggering when the trigger condition is Address.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ADDRess:VALue "0111101101011010" specifies 0111101101011010 as the field within a ESPI frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ADDRess:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ADDRess:VALue "0111101101011010", indicating that 0111101101011010 is the currently specified field within a ESPI frame to search on.
Sets or queries the ESPI bus command opcode used for the search trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | GETSTATus | GETCONFig | SETCONFig | GETNP | GETPC | PUTNP | PUTPC | PUTIORDSHORt | PUTIOWRSHORt | PUTMEMRD32SHORt | PUTMEMWR32SHORt | PUTOOB | GETOOB | PUTFLASHC | GETFLASHNP | PUTVWIRe | GETVWIRe | Selects the ESPI command opcode to search on. |
enum - Returns the currently selected command opcode.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:COMMAND:OPCode SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:COMMAND:OPCode?
Sets or queries the ESPI bus command opcode used for the search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| opcode | enum | GETSTATus | GETCONFig | SETCONFig | GETNP | GETPC | PUTNP | PUTPC | PUTIORDSHORt | PUTIOWRSHORt | PUTMEMRD32SHORt | PUTMEMWR32SHORt | PUTOOB | GETOOB | PUTFLASHC | GETFLASHNP | PUTVWIRe | GETVWIRe | ESPI bus command opcode to search on. |
enum - Returns the currently selected command opcode for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:COMMAND:OPCode SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:COMMAND:OPCode?
Sets or queries the trigger condition for an eSPI bus search. The search number is specified by x and the command requires option SR-ESPI.
Sets or queries the trigger condition for an ESPI bus search. The search number is specified by x.
Sets or queries the ESPI bus cycle type for the selected search number x. Requires the SR-ESPI option.
enum - Returns the currently specified ESPI cycle type.
Sets or queries the ESPI bus cycle type for the specified search number x. Requires the SR-ESPI option.
enum - Returns the currently specified ESPI cycle type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:CYCLETYPe MESSage SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:CYCLETYPe?
Specifies the length of the data string in bytes to be used for ESPI triggering if the trigger condition is DATA. The default data size is 1 byte and the valid range is 1 to 5.
| Name | Type | Values | Description |
|---|---|---|---|
| data size | integer | 1 - 5 | Specifies the data size in bytes. |
integer (byte) - Returns the data size value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:SIZe 4 SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:SIZe?
Specifies the length of the data string in bytes used for ESPI triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 5 | Specifies the data size. |
integer - Returns the data size value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:SIZe 4 SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:SIZe?
Specifies the binary data string used for ESPI triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:VALue "0111100111" sets the data value as "0111100111".
Specifies the binary data string used for ESPI triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:DATa:VALue "0111100111" sets the data value as "0111100111".
Sets or queries the ESPI error type used for command or response searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CRC | DEFer | FATal | NONFATal | NORESPonse | CMDOPCODe | CYCLETYPe | Error type to search on. |
enum - Returns the current ESPI error type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ERRor:TYPe CRC specifies CRC as the error type to search on.
Sets or queries the ESPI bus error type to search on for the specified search number. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CRC | DEFer | FATal | NONFATal | NORESPonse | CMDOPCODe | CYCLETYPe | Error type to search on. |
enum - Returns the current ESPI bus error type. The returned value is one of the configured error-type keywords.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:ERRor:TYPe CRC specifies CRC as the error type to search on.
Specifies the binary data string used for ESPI triggering when the trigger condition is Length. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value for the ESPI Length trigger setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:LENGth:VALue "011110110101" sets the tag value as "011110110101". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:LENGth:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:LENGth:VALue "011110110101", indicating that the tag value is "011110110101".
Sets or queries the ESPI length value used for triggering when the trigger condition is Length. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value set for the ESPI length trigger.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:LENGth:VALue "011110110101" SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:LENGth:VALue?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASeset / query
Sets or queries the phase in ESPI bus for the specified search number. The phase selects which field or packet to search on.
| Name | Type | Values | Description |
|---|---|---|---|
| phase | enum | COMMand | RESPONSE | RESPONSEHEADer | RESPONSENOHEADer | Specifies the ESPI field or packet to search on. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:PHASe COMMand specifies command as the field/packet to search on.
Sets or queries the phase in the ESPI bus for the selected search number x. The phase determines which field/packet is searched on.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | COMMand | RESPONSE | RESPONSEHEADer | RESPONSENOHEADer | Selects the phase to search on. |
enum - Returns the current ESPI phase selection.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:PHASe COMMand specifies command as the field/packet to search on.
Sets or queries the response cycle type for ESPI bus search on command. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | MEMRDWR32 | MEMRDWR64 | MESSage | MSGWITHDATa | SUCCESSNODATa | SUCCESSDATa | UNSUCCESSNODATa | LTR | FLASHREAD | FLASHWRITe | FLASHERASe | Response cycle type to search on. |
enum - Returns the current response cycle type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPCYCLE:TYPe LTR SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPCYCLE:TYPe?
Sets or queries the ESPI response cycle type used for search on the specified search number. Requires option SR-ESPI.
| Name | Type | Values | Description |
|---|---|---|---|
| cycle type | enum | MEMRDWR32 | MEMRDWR64 | MESSage | MSGWITHDATa | SUCCESSNODATa | SUCCESSDATa | UNSUCCESSNODATa | LTR | FLASHREAD | FLASHWRITe | FLASHERASe | Cycle type to search on. |
enum - Returns the current ESPI response cycle type for the specified search number.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPCYCLE:TYPe LTR SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPCYCLE:TYPe?
Specifies the binary data string used for ESPI triggering when the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Specifies the binary data string used for ESPI triggering when the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Specifies the binary data string used for ESPI triggering when the trigger condition is SMBus Slave Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value to use as the search tag value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess"01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess "01111011", indicating that the tag value is "01111011".
This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Slave Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess"01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:SMBUS:SLAVe:ADDRess "01111011", indicating that the tag value is "01111011".
Specifies the binary data string used for ESPI triggering when the trigger condition is Tag. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string used for ESPI triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALUE "01111011" SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALUE? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALUE "01111011"
Specifies the binary data string used for ESPI triggering when the trigger condition is Tag. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALue "01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:TAG:VALue "01111011", indicating that the tag value is "01111011".
Specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire count. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue "01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue "01111011", indicating that the tag value is "01111011".
This command specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire count. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue "01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue "01111011", indicating that the tag value is "01111011".
Specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire Data. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string to use for ESPI triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue "01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue "01111011", indicating that the tag value is "01111011".
Returns or sets the identifier value for the ESPI Virtual wire Data condition. The default value is XXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue"01111011" sets the tag value as SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue"01111011", indicating that the tag value is "01111011".
This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Index. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue "01111011" sets the tag value as SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue "01111011", indicating that the tag value is "01111011".
Specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire Index. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue "01111011", indicating that the tag value is "01111011".
Sets or queries the identifier value used for ESPI Virtual Wire response search. The default value is XXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPonse:VALue "01111011" SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPonse:VALue?
Sets or queries the ESPI virtual wire response identifier value for search x. The identifier value is a QString and the default is XXXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| identifier value | string | - | The identifier value. |
returns - Returns the current identifier value as a quoted QString.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPonse:VALue "01111011" sets the tag value as "01111011". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPonse:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:RESPonse:VALue "01111011", indicating that the tag value is "01111011".
This command specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire Status. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue "0111101110101010" sets the tag value as "0111101110101010". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue "0111101110101010", indicating that the tag value is "0111101110101010".
Specifies the binary data string used for ESPI triggering when the trigger condition is Virtual wire Status. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Identifier value. |
string - Returns the identifier value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue "0111101110101010" sets the tag value as "0111101110101010". SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ESPI:STATus:VALue "0111101110101010", indicating that the tag value is "0111101110101010".
Sets or queries the Address Mode in EtherCAT bus. The search number is specified by x.
Sets or queries the Address Mode in the EtherCAT bus. The search number is specified by x.
Sets the binary Network Variable Count used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Network Variable Count to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CNTNV:VALue "1100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CNTNV:VALue?
Sets or queries the binary Network Variable Count used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Network Variable Count to be used when searching on an EtherCAT bus signal. |
string - The current binary Network Variable Count value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CNTNV:VALue "1100110011001100" sets the Network Variable Count value as "1100110011001100". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CNTNV:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CNTNV:VALue "1100110011001100", indicating the Network Variable Count value is "1100110011001100".
Sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Sets or queries the trigger condition for an EtherCAT bus search. The search number is specified by x.
Sets or queries the trigger condition for an EtherCAT bus search. The search number is specified by x; requires option SR-ETHERCAT.
enum - Returns the current EtherCAT trigger condition.
Sets the binary Cycle Number used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | The binary Cycle Number to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CYC:VALue "1100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CYC:VALue?
Sets or queries the binary Cycle Number used for EtherCAT bus searching. The search number is specified by x.
string - Returns the current binary Cycle Number value as a quoted string.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CYC:VALue "1100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CYC:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:CYC:VALue "1100110011001100", indicating the Cycle Number value is "1100110011001100".
Sets or queries the Datagram fields in an EtherCAT bus search. The search number is specified by x.
Sets or queries the Datagram fields in an EtherCAT bus. The search number is specified by x.
Sets or queries the Datagram Header field used in EtherCAT bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| field | enum | CMD | IDX | ADDRess | LEN | CIRCulating | IRQ | Selects which Datagram Header field to set. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATAGRAMHEADer LEN specifies the Datagram Header field and sets it to LEN.
Sets or queries the Datagram Header field selection in EtherCAT bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CMD | IDX | ADDRess | LEN | CIRCulating | IRQ | Selects which Datagram Header field is used. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATAGRAMHEADer LEN specifies the Datagram Header field and sets it to LEN.
Sets the binary Datagram length information used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Datagram length information used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth "11001100110" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
Sets the binary Datagram length information used for searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Datagram length information used when searching on an EtherCAT bus signal. |
string - Returns the binary Datagram length information setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth "11001100110"
Sets the length of the data string in bytes to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 5 | Length of the data string in bytes. |
Specifies the length of the data string in bytes to be used for EtherCAT bus searching. The search number is specified by x; requires option SR-ETHERCAT.
integer - Returns the data string length in bytes used when searching on an EtherCAT bus signal.
Specifies the binary data string used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Cycle Number to be used when searching on an EtherCAT bus signal. |
string - Returns the current binary data string setting for the EtherCAT bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATa:VALue "00001111" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATa:VALue?
Sets the binary data string used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Cycle Number to be used when searching on an EtherCAT bus signal. |
string - Returns the current binary data value used for EtherCAT bus searching.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATa:VALue "00001111" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DATa:VALue?
Sets the binary MAC destination address value used for searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary MAC destination address value to be used when searching on an EtherCAT bus signal. |
Sets the binary MAC destination address value used when searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary MAC destination address value to be used when searching on an EtherCAT bus signal. |
Sets or queries the Device Address in EtherCAT bus for the specified search number. POSition is the default setting; OFFSet selects offset mode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | POSition | OFFSet | Specifies the Device Address mode. |
enum - Returns the current Device Address mode.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DEVICEADDRess OFFSet SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DEVICEADDRess?
Sets or queries the EtherCAT bus Device Address for the specified search number x. POSition is the default setting; OFFSet selects offset mode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | POSition | OFFSet | Selects whether the Device Address is positioned or offset. |
enum - Returns the current Device Address mode, either POSition or OFFSet.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DEVICEADDRess OFFSet SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:DEVICEADDRess?
Sets or queries the EtherCAT Error Reply Service Data field for the specified search number. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TYPe | DETail | Selects whether the Error Reply Service Data is set to type or detail. |
Sets or queries the error reply service data fields in EtherCAT bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TYPe | DETail | Selects the Error Reply Service Data setting. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa TYPe SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
Sets or queries the EtherCAT Frame Type for the specified search number x. Requires option SR-ETHERCAT.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| frame type | enum | BASic | UDPIP | Frame type to set. |
enum - Returns the current EtherCAT Frame Type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:FRAMETYPe UDPIP SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:FRAMETYPe?
Sets or queries the EtherCAT bus Frame Type for the specified search number. BASic is the default value.
enum - Returns the current EtherCAT bus Frame Type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:FRAMETYPe UDPIP SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:FRAMETYPe?
Sets the binary HASH to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Hash value to be used when searching on an EtherCAT bus signal. |
Sets or queries the binary HASH to be used for EtherCAT bus search. The search number is specified by x.
returns
Sets or queries the binary header length to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The binary header length to be used when searching on an EtherCAT bus signal. |
string - Returns the binary header length setting for the EtherCAT trigger header length.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:HEADer:LENGth"00011100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:HEADer:LENGth?
Sets or queries the binary header length to be used for EtherCAT bus searching. The search number is specified by x.
string - Returns the binary header length value for the selected EtherCAT search.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:HEADer:LENGth? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:HEADer:LENGth "00011100", indicating the value of the Length is "XXX00011100".
Sets or queries the binary IP Identification used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary IP Identification to be used when searching on an EtherCAT bus signal. |
Sets or queries the binary IP Identification used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The binary IP Identification to be used when searching on an EtherCAT bus signal. |
string - Returns the current binary IP Identification value.
Sets the binary Indexing information to be used for EtherCAT bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Index value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IDX:VALue "00010001" sets the Index value as "00010001". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IDX:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IDX:VALue "00010001", indicating the Index value is "00010001".
Sets the binary EtherCAT index value used for the specified search number. The search number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Index value to be used when searching on an EtherCAT bus signal. |
string - Returns the current EtherCAT index value for the specified search number.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IDX:VALue "00010001" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IDX:VALue?
Sets the binary Index to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Index to be used when searching on an EtherCAT bus signal. |
string - Returns the current Index value as a quoted binary string.
Sets the binary EtherCAT Index used for a search entry. The search number is specified by x.
string - Returns the EtherCAT Index value as a quoted binary string.
Sets the Destination IP Address to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The binary Destination IP Address to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue "01011010010110100101101001011010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue "01011010010110100101101001011010"
Sets the Destination IP Address used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Destination IP Address used when searching on an EtherCAT bus signal. |
string - Returns the Destination IP Address value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue "01011010010110100101101001011010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
Sets the Source IP Address to be used for EtherCAT bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Source IP Address to be used when searching on an EtherCAT bus signal. |
Sets the binary Source IP Address used when searching on an EtherCAT bus signal. The default source address is 32 bits, shown as "XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Source IP Address to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue "01011010010110100101101001011010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue? might
Sets the binary interrupt request information to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary interrupt request information used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:IRQ:VALue "1100110011001100"
Sets the binary Length value used when searching on an EtherCAT bus signal. The default Length is 16 bits and the default value is "XXXXXXXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Length to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:LEN:VALue "1100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:LEN:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:LEN:VALue "1100110011001100"
Sets the binary logical address information to be used when searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Logical Address to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:LOGICALADDRess:VALue "11001100110011001100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
Sets the EtherCAT mailbox field selection for a search. The mailbox field can be Mailbox header, service data, or error reply service data.
| Name | Type | Values | Description |
|---|---|---|---|
| field | enum | MAILBOXHEADer | SERVICEDATa | ERRSERVICEDATa | Selects which mailbox fields are used. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox ERRSERVICEDATa SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox?
Sets the binary Mailbox Address to be used for EtherCAT bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Mailbox Address to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue "0000111100001111" sets the Mailbox Address value as "0000111100001111". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue "0000111100001111", indicating the Mailbox Address value is "0000111100001111".
Sets the binary counter of the mailbox services to be used for EtherCAT bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Mailbox Address to be used when searching on an EtherCAT bus signal. |
Sets or queries the Error Reply Service Data Details in EtherCAT bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| detail | enum | ONE | TWO | THRee | FOUR | FIVe | SIX | SEVEn | EIGHt | NINe | Detail field value. |
enum - Returns the current Detail field value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:DETail TWO SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:DETail?
Sets or queries the EtherCAT Mailbox Type field for the specified search number x. The available values are discrete mailbox type codes, with ZERo as the default.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ZERo | ONE | TWO | THRee | FOUR | FIVe | RESERved | FIFTeen | Selects the Mailbox Type value. |
enum - Returns the current Mailbox Type field.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILBOXTYPe TWO SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILBOXTYPe?
Sets or queries the EtherCAT Mailbox Header field for the specified search number x. The allowed header field selections are Length, Address, Channel, Priority, Type, and Count.
| Name | Type | Values | Description |
|---|---|---|---|
| header | enum | LENGth | ADDRess | CHANnel | PRIority | TYPe | CNT | Selects which Mailbox Header field to use. |
enum - Returns the current Mailbox Header field selection for the specified search number x.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:HEADer TYPe SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:MAILbox:HEADer?
Specifies the length of the EtherCAT network variable data string in bytes. The search number is specified by x.
Sets or queries the EtherCAT Network Variable field for the specified search number. Requires option SR-ETHERCAT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PUBHEADer | NVHEADer | NVDATa | Selects which Network Variable field to use. |
enum - Returns the current Network Variable field setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWork:VARiableNVHEADer SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWork:VARiable?
Specifies the binary network variable data string used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary network variable data value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue "00110011" sets the Network Variable Data value to "00110011". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue "00110011", indicating the Network Variable Data value is "00110011".
Sets or queries the Network Variable Header field used for EtherCAT bus search on the specified search number.
enum - Returns the current Network Variable Header field setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWork:VARiable:HEADerNVLEN SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
Sets the binary address offset information to be used for EtherCAT bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | Binary Address Offset data value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:OFFSet:VALue "1100110011001100" sets the Address Offset value to "1100110011001100". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:OFFSet:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:OFFSet:VALue "1100110011001100", indicating the Address Offset value is "1100110011001100".
Sets the binary Address Position value used when searching on an EtherCAT bus signal. The default size is 16 bits and the default value is "XXXXXXXX XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Address Position value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:POSition:VALue "1100110011001100" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:POSition:VALue?
Sets or queries the EtherCAT Protocol Type in the EtherCAT bus search settings. The search number is specified by x.
enum - Returns the EtherCAT Protocol Type.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:PROTOCOLTYPe MAILbox SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:PROTOCOLTYPe?
Sets the binary Publisher ID to be used for EtherCAT bus search. The search number is specified by x.
Sets the binary Quality value to be used when searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Quality value to be used when searching on an EtherCAT bus signal. |
Sets the binary Service Data Length to be used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Service Data Length to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:LENGth "0000111100001111" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
Specifies the length of the service data string in bytes to be used for EtherCAT bus searches. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 5 | Service Data size. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:SIZe 2 SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
Specifies the length of the EtherCAT service data string in bytes used for searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Service Data value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:VALue "10100110" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SERVice:DATa:VALue "10100110"
Sets the binary MAC source address value used when searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary MAC source address value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SOURCEADDRess:VALue "10100110"
Sets the binary UDP Source port value used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Source Port value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SRC:PORT:VALue "0101101001011010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:SRC:PORT:VALue?
Sets the binary Tag Control Information used for EtherCAT bus searching. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary TCI value to be used when searching on an EtherCAT bus signal. |
Sets the binary Working Counter information to be used when searching on an EtherCAT bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary Working Counter information value to be used when searching on an EtherCAT bus signal. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:WKC:VALue "1100110011001100" sets the Working Counter information value as "1100110011001100". SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:WKC:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERCAT:WKC:VALue "1100110011001100", indicating the Working Counter information value is "1100110011001100".
Specifies the Ethernet bus field or condition to search on for the selected search number. Requires option SRENET.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SFD | MACADDRess | MACLENgth | IPHeader | TCPHeader | DATa | EOP | IDLe | FCSError | QTAG | Field or condition for the Ethernet bus search. |
Sets or queries the binary data value used when searching on an Ethernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range; the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data value to be used when searching on an Ethernet bus signal. |
string - Returns the current binary data value used when searching on an Ethernet bus signal.
SEARCH:SEARCH1:TRIGger:A:BUS:ETHERnet:DATa:HIVALue "101011" SEARCH:SEARCH1:TRIGger:A:BUS:ETHERnet:DATa:HIVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:HIVALUE "10101".
Specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition must be set to DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | 0 | Data offset value used when searching on the Ethernet data field. |
Specifies the qualifier used when searching on an Ethernet bus signal. The search condition must be set to DATa, and the search number is specified by x.
enum - Returns the current Ethernet data search qualifier.
Specifies the length of the Ethernet data string, in bytes, to use when searching on the Ethernet bus signal. The search condition must be set to DATa, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 16 | Length of the data string in bytes. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:SIZE 4 SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:DATA:SIZE?
Specifies the binary value to use when searching on the Ethernet bus signal. The search condition must be set to DATa, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary value used for the Ethernet data search. |
Specifies the binary destination address value used when searching on an Ethernet bus signal. The search condition must be set to IPHeader, and x selects the search number.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters using 0, 1, and X; bits in the string replace the least significant bits. |
string - Returns the currently specified binary destination address value used for Ethernet IP header destination address searching.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:DESTINATIONADDR:VALUE "11000000101010000000000000000001" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:DESTINATIONADDR:VALUE? might return "11000000101010000000000000000001", indicating that 192.168.0.1 is the currently specified value used when searching on the Ethernet IPv4 header address destination field.
Specifies the binary protocol value to use when searching on the Ethernet bus signal. The search condition must be set to IPHeader, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary protocol value, entered as a quoted string up to 8 characters using 0, 1, and X. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:PROTOCOL:VALUE "01010010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:PROTOCOL:VALUE?
Specifies the binary source address value to use when searching on an Ethernet bus signal. The search condition must be set to IPHeader, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Quoted binary string value up to 8 characters, using 0, 1, and X; specified bits replace the least significant bits and unspecified upper bits remain unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:SOURCEADDR:VALUE "01010010" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:IPHEADER:SOURCEADDR:VALUE?
Specifies the binary MAC address destination value to use when searching on an Ethernet bus signal. The search condition must be set to MACADDRess, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary MAC address destination value to use for the search, as a quoted string of up to 48 characters containing 0, 1, and X. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:ADDRESS:DESTINATION:VALUE "XXXXXXXX0011010111111100000001111010101011001000" specifies touse the value of XX:35:FC:07:AA:C8 hex when searching on the Ethernet MAC address destination field. SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:ADDRESS:DESTINATION:VALUE? might return "XXXXXXXX0011010111111100000001111010101011001000", indicating a MAC address destination field value of XX:35:FC:07:AA:C8 hex.
Specifies the binary MAC address source value to use when searching on an Ethernet bus signal. The search condition must be set to MACADDRess, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 48 characters containing 0, 1, and X; specified bits replace the least significant bits. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:ADDRESS:SOURCE:VALUE
Specifies the binary MAC length high value to use when searching on an Ethernet bus signal. The search condition must be set to MACADDRess, and search number x selects which search definition is affected.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | 16 characters | Quoted binary string value containing 0, 1, and X; specified bits replace the least significant bits. |
string - Returns the currently stored quoted binary string value for the Ethernet MAC length high value.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:LENGTH:HIVALUE "XXXXXXXX00001000" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:LENGTH:HIVALUE? might return "XXXXXXXX00001000"
Specifies the MAC length value to use when searching on an Ethernet bus signal. The search condition must be set to MACADDRess, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 16 characters; allowable characters are 0, 1, and X. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:LENGTH:HIVALUE "XXXXXXXX00001000" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:MAC:LENGTH:HIVALUE?
Specifies the binary Q-tag information to use when searching on an Ethernet bus signal. The search condition must be set to QTAG, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters containing 0, 1, and X; specified bits replace the least significant bits while unspecified upper bits remain unchanged. |
Specifies the binary ACK number value to use when searching on an Ethernet bus signal. The search condition must be set to TCPHeader, and search number x selects the search instance.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 32 characters containing only 0, 1, and X; the bits replace the least significant bits, leaving unspecified upper bits unchanged. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:TCPHEADER:ACKNUM:VALUE "XXXXXXXXXXXXXXXXXXXX00001000"
Specifies the binary destination port value to use when searching on an Ethernet TCP header destination port number. The search condition must be set to TCPHeader, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary string value, up to 32 characters, using only 0, 1, and X. |
Specifies the binary sequence number value to use when searching on an Ethernet bus signal. The search condition must be set to TCPHeader, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string value, up to 32 characters, containing 0, 1, and X; specified bits replace the least significant bits. |
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:TCPHEADER:SEQNUM:VALUE "XXXXXXXXXXXXXXXXXXXX000100010001" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:TCPHEADER:SEQNUM:VALUE? might return "XXXXXXXXXXXXXXXXXXXXXX0010010100"
Sets the binary source port value used when searching on an Ethernet bus signal. The search condition must be set to TCPHeader, and x specifies the search number.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string specifying the binary source port value; allowable characters are 0, 1, and X, up to 16 characters. |
string - Returns the currently specified binary source port value as a quoted string.
SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:TCPHEADER:SOURCEPORT:VALUE "XXXX000010100110" SEARCH:SEARCH1:TRIGGER:A:BUS:ETHERNET:TCPHEADER:SOURCEPORT:VALUE?
Specifies the high binary address value used to search within an eUSB frame. The search number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High binary address value as XXXXXXX within an eUSB frame to search on. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:HIVALue XXXXXXX SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:HIVALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:HIVALue XXXXXXX
Sets the binary address value used when triggering on an eUSB bus signal. The trigger condition must be set to TOKEN, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary address value in the specified valid format; valid characters are 0, 1, and X for binary, hexadecimal, and symbolic. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:VALue XXXXXXX specifies binary address value as XXXXXXX within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ADDress:VALue XXXXXXX, indicating the binary address value as XXXXXXX in the currently specified field within an eUSB frame to search on.
Sets or queries the search type for the specified eUSB search. The search number is specified by x.
enum - Returns the current eUSB search condition.
Sets the number of Sync bits, in bytes, to be used when triggering on an eUSB bus signal. The trigger condition must be set to SYNC, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 12 - 32 | Number of Sync bits to use. |
returns
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATABITS:SIZe 12 specifies Sync bits as 12 within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATABITS:SIZe? might return
Sets the high binary data value used when triggering on an eUSB bus signal. The trigger condition must be set to DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Specifies the value in the valid format. |
string - Returns the currently specified high binary data value.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:HIVALue XXXXXXX
Sets the byte offset to look for a data pattern at, in bytes, when triggering on an eUSB bus signal. The trigger condition must be set to DATA and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 - 1024 | Specifies the byte offset. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:OFFSet -1 specifies the byte offset as -1 within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:OFFSet? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:OFFSet XXXXXXX, indicating that the offset value is -1 in the currently specified field within an eUSB frame to search on.
Sets the qualifier used when triggering on an eUSB bus signal. The trigger condition must be IDANDDATA or DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | Inrange | OUTrange | Qualifier to use for the eUSB bus trigger condition. |
enum - Returns the current qualifier setting.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:QUAlifier EQual specifies trigger value as Equal. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:QUAlifier? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:QUAlifier EQual, indicating the trigger value as Equal.
Sets the length of the data string, in bytes, used when triggering on an eUSB bus signal. The trigger condition must be set to DATA and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 16 | Length of the data string. |
Specifies the eUSB trigger type to use for search conditions on any, DATA0, DATA1, DATA2, or MDATA packets. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | DATA0 | DATA1 | DATA2 | MDATA | Selects the eUSB packet type or condition to search on. |
enum - Returns the currently specified eUSB trigger type for the selected search number.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:TYPe DATA0 sets the data type as DATA0. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:TYPe? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:TYPe DATA0, indicating that the data type is DATA0.
Sets the binary data value used when triggering on an eUSB bus signal. The trigger condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | Binary data value to be used for triggering. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:VALue <QString> SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:DATa:VALue?
Sets the endpoint binary value used when triggering on an eUSB bus signal. The trigger condition must be set to TOKEN, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary value to use for the eUSB endpoint search. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ENDPoint:VALue XXXX SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ENDPoint:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ENDPoint:VALue XXXX, indicating that end point value as XXXX in the currently specified field within an eUSB frame to search on.
Specifies eUSB Search EOP Bits to be On or Off for the selected search number. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Enables or disables eUSB Search EOP Bits. |
Sets the number of EOP bits used when triggering on an eUSB bus signal. The trigger condition must be set to EOP and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 9 - 100 | Specifies the number of EOP bits. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe 100 specifies maximum EOP bits as 100 within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe 100, indicating that maximum EOP bits value is 100 in the currently specified field within an eUSB frame to search on.
Sets the number of EOP bits, in bytes, used when triggering on an eUSB bus signal. The trigger condition must be set to EOP, and search number x selects the search instance.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 8 - 100 | Number of EOP bits to use. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe 8 specifies EOP bits as 8 within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe 8, indicating that EOP bits value is 8 in the currently specified field within an eUSB frame to search on.
Sets the qualifier used when triggering on an eUSB bus signal. The trigger condition must be set to EOP Bits, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier used for the eUSB EOP trigger condition. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOP:QUAlifier EQual SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
Sets the minimum number of EOP bits used when searching on an eUSB frame. The search number is specified by x, and the default minimum is 8 bits.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 8 - 99 | Number of EOP bits to set as the minimum. |
string - Returns the current command setting, including the minimum EOP bits value for the specified search field.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe 8 SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRTypeset / query
Specifies the eUSB trigger error type to search on. The search number is specified by x and the command requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | BITSTUFFing | CRC5 | CRC16 | PID | Selects the eUSB error condition to search for. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ERRType PID SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ERRType? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:ERRType PID, indicating that PID is the currently specified field within a eUSB frame to search on.
This command specifies the eUSB trigger type to be valid on any, ack, nak, stall, or nyet condition. The search number is specified by x.
Sets the binary Register Access Protocol address value used when triggering on an eUSB bus signal. The trigger condition must be set to TOKEN, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value in the specified valid format. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue XXXXXX SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
Specifies the eUSB Register Access Protocol search option for search number x. The available RAP command types are All, Write, Read, Clear, and Set.
| Name | Type | Values | Description |
|---|---|---|---|
| command | enum | ALL | WRITe | READ | CLEar | SET | RAP command type to search on. |
enum - Returns the current RAP command search setting.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:COMMand ALL SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:COMMand?
Sets the binary Register Access Protocol data value used when triggering on an eUSB bus signal. The trigger condition must be set to TOKEN and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value in the specified valid format; valid characters are 0, 1, and X for binary, and symbolic values are also accepted. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:DATa:VALue XXXXXXXX specifies RAP data value as XXXXXXXX within an eUSB frame to search on.
Specifies the eUSB Register Access Protocol search option for the selected search number. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | COMMand | ADDRess | RAPDATa | Selects the RAP search option as Command, Address, or RapData. |
enum - Returns the currently specified RAP search option for the selected search number.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:OPTion COMMand SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:OPTion? might return :SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:RAP:OPTion COMMand, indicating that RAP option is COMMand.
Sets the binary frame number used when triggering on an eUSB bus signal. The trigger condition must be set to TOKEN, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | 000 0000 0000 - 111 1111 1111 | Binary frame number within the specified range. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SOFFRAMENUMber XXXXXXXXXXX specifies frame number as SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SOFFRAMENUMber? might return
Specifies the eUSB trigger special type for the selected search number. The setting is valid on any, err, split, ping, or reserved condition.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ANY | PREamble | ERROr | SPLit | PING | RESERVed | Selects the special trigger condition. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPECIALType ANY SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPECIALType?
Specifies the eUSB trigger type endpoint condition for the selected search number. Requires option SR-EUSB2.
Sets the binary hub address value used when triggering on an eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value in the specified valid format. |
string - Returns the currently specified hub address value in the selected field within an eUSB frame to search on.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue XXXXXXX specifies hub address value as XXXXXXX within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue XXXXXXX, indicating that hub address value is XXXXXXX in the currently specified field within an eUSB frame to search on.
Sets the binary port address value to be used when triggering on an eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary port address value in the specified valid format. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue XXXXXXX specifies port address value as XXXXXXX within an eUSB frame to search on. SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue XXXXXXX, indicating that port address value is XXXXXXX in the currently specified field within an eUSB frame to search on.
Specifies the eUSB trigger type start/complete condition for search number x. Requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | NOCARE | SSPLIT | CSPLIT | Sets the start/complete condition to nocare, start phase, or complete phase. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:SC:VALue NOCARE SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
This command specifies the eUSB trigger type start/complete condition for the selected search number x. It requires option SR-EUSB2.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | FULLSPEED | LOWSPEED | ISOSTART | ISOMID | ISOEND | ISOALL | Sets the eUSB trigger type start/complete condition. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:SE:VALue NOCARE SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
Sets the maximum number of sync bits used when triggering on an eUSB bus signal. The trigger condition must be set to SYNC, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 13 - 32 | Number of sync bits. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe 32 SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
Sets the number of sync bits, in bits, to be used when triggering on an eUSB bus signal. The trigger condition must be set to SYNC, and the search number is specified by x.
Sets the qualifier used when triggering on an eUSB bus signal. The trigger condition must be set to Sync Bits, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Selects the trigger qualifier. |
enum - Returns the currently specified qualifier.
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNC:QUAlifier EQual SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
This command specifies eUSB Search Sync Bits to be On or Off for the selected search number x. It requires the SR-EUSB2 option.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Specifies the Sync bits as OFF for Low Speed and Full Speed, or ON for High Speed. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNCSEARch OFF SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:SYNCSEARch?
This command specifies the eUSB trigger token type to search on. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | SOF | OUT | IN | SETUP | Specifies the eUSB token type as Any, Start Of Frame, OUT, IN, or SETUP. |
SEARCH:SEARCH1:TRIGger:A:BUS:EUSB:TOKENType SETUP specifies the token type Setup as the field within an eUSB frame to search on.
Sets or queries the FlexRay bus search condition for search number x. Requires the 5-SRAUTO or SUP5-SRAUTO Triggering and Analysis application.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | FRAMEType | IDentifier | CYCLEcount | HEADer | DATA | IDANDDATA | EOF | ERRor | FlexRay trigger condition to use for the search. |
enum - Returns the current FlexRay bus search condition.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:CONDition SOF SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:CONDITION SOF
Sets or queries the high value used when searching on a FlexRay bus cycle count field. The search number is specified by x, and the search condition must be CYCLEcount.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - |
Sets or queries the qualifier used when searching on a FlexRay bus search cycle count field. The search number is specified by x, and the search condition must be set to CYCLEcount.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | LESSEQual | MOREEQual | UNEQual | LESSthan | MOREthan | INrange | OUTrange | Qualifier used for the FlexRay cycle count search condition. |
enum - Returns the currently selected cycle count qualifier.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifierLESSthan SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
Sets or queries the low value used when searching on a FlexRay bus cycle count field. The search number is specified by x, and the search condition must be set to CYCLEcount.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Low value used for the cycle count search. |
string - Returns the low cycle count value used for the search.
Sets or queries the high value when searching on a FlexRay bus data field. The search number is specified by x, and the search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the data value. |
string - Returns the data value.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue "1010" sets the data value to XXXXXX1010. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:DATA:HIVALUE "XXXXXXXXXX", indicating the data value is a don’t care.
Sets or queries the offset of the data string, in bytes, when searching on a FlexRay bus data field. The search number is specified by x, and the search condition must be set to IDANDDATA OR DATA.
Sets or queries the qualifier used when searching on a FlexRay bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | LESSEQual | MOREEQual | UNEQual | LESSthan | MOREthan | INrange | OUTrange | Qualifier used for FlexRay bus signal searching. |
enum - Returns the current FlexRay data qualifier.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier LESSTHAN sets the data qualifier to less than. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:DATA:QUALIFIEREQUAL, indicating the data qualifier is equal.
Sets or queries the length of the data string, in bytes, used when searching on a FlexRay bus data field. The search number is specified by x, and the search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | -1 | Specifies the data size in bytes. A data size of -1 is don't care. |
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:SIZe 2 SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
Sets or queries the low value used when searching on a FlexRay bus data field. The search number is specified by x, and the search condition must be IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value to search for. |
string - Returns the data value for the selected FlexRay bus search.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:VALue "1010" sets the data value to XXXXXX1010. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:DATa:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:DATA:VALUE "XXXXXXXXXX", indicating the data value is a don’t care.
Sets or queries the FlexRay end-of-file type used for search triggering. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | STATIC | DYNAMIC | Selects the FlexRay end-of-file type. |
enum - Returns the current FlexRay end-of-file type.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:EOFTYPE STATIC SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
Sets or queries the error type when searching on a FlexRay bus signal. The search number is specified by x, and the search condition must be set to ERROR.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| error type | enum | CRCHeader | CRCTrailer | NULLFRStatic | NULLFRDynamic | SYNCFrame | STARTupnosync | Sets the FlexRay error type to search for. |
enum - Returns the current FlexRay error type.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:ERRTYPE SYNCFRAME sets the error type to SYNCFRAME. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:ERRTYPE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:ERRTYPE CRCHEADER, indicating the error type is CRCHEADER.
Sets or queries the high value used when searching on a FlexRay bus frame ID field. The search condition must be set to Identifier, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Frame ID high value. |
string - Returns the current frame ID high value.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:HIVALue "XXXXXXX1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:HIVALue?
Sets or queries the qualifier used when searching on a FlexRay bus frame id. The search condition must be set to Identifier, and search number x selects the search instance.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to apply to the FlexRay bus frame id search. |
enum - Returns the current qualifier setting.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:QUALifierUNEQUAL sets the qualifier to unequal. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:QUALifier? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:FRAMEID:QUALIFIEREQUAL indicating the qualifier is set to equal.
Sets the low value used when searching on a FlexRay bus ID field. The search condition must be set to IDentifier, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Frame ID value. |
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:VALue "XXXXXXX1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:VALue?
Sets or queries the low value used when searching on a FlexRay bus ID field. The search condition must be set to IDentifier, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Frame ID value. |
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:VALue "XXXXXXX1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEID:VALue?
Sets or queries the FlexRay bus search frame type for the specified search number. Requires the search option to support Triggering and Analysis application.
enum - Returns the current FlexRay bus search frame type.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEType startup sets the frame type to startup. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEType? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:FRAMETYPE NORMAL, indicating the frame type is normal.
Sets or queries the FlexRay bus search frame type for the specified search number. Requires option 5-SRAUTO or SUP5-SRAUTO Triggering and Analysis application.
enum - Returns the current FlexRay bus search frame type.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEType startup sets the frame type to startup. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXray:FRAMEType? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:FRAMETYPE NORMAL, indicating the frame type is normal.
Sets or queries the CRC portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the CRC. |
string - Returns the CRC portion of the FlexRay header search string.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC "1010" SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
Sets or queries the CRC portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the CRC. |
string - Returns the CRC portion of the binary header string.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC "1010" sets the header CRC to XXXXXX101. SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:HEADER:CRC "XXXXXXXXXXX", indicating the header CRC is a don’t care.
Sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADer.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the header cycle count. |
string - Returns the header cycle count string for the selected search, with X characters indicating don't-care positions or an unset cycle count.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount "1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
Sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADer.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Specifies the header cycle count. |
string - Returns the header cycle count string.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount "1010" sets the header cycle count to XX1010. SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? might return SEARCH:SEARCH1:TRIGGER:A:BUS:FLEXRAY:HEADER:CYCLECOUNT "XXXXXX" indicating the cycle count has not been set.
Sets or queries the frame ID portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADER or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the frame ID. |
string - Returns the frame ID portion of the binary header string.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID "1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Sets or queries the frame ID portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADER or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the frame ID. |
string - Returns the frame ID portion of the binary header string; the example shows don’t-care bits as X characters.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID "1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADer.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the header Indicator Bits. |
string - Returns the header Indicator Bits string; the example shows Xs when the bits have not been set.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits "1010" SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x, and the search condition must be set to HEADer.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the header Indicator Bits. |
string - Returns the header Indicator Bits string for the selected search. The example shows unselected bits returned as don’t care ('X').
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits "1010" SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x, and the search condition must be set to HEADER.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the header Payload Length. |
string - Returns the current payload length string for the FlexRay bus search trigger header; if not set, the response may indicate XXXXXXX.
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth "1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x, and the search condition must be set to HEADer.
| Name | Type | Values | Description |
|---|---|---|---|
| length | string | - | Header payload length. |
string - Returns the header Payload Length string; if it has not been set, the response may contain "XXXXXXX".
SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth "1010" SEARCH:SEARCH1:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ADDR10 | ADDR7 | Address mode setting. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:ADDRESS:MODE ADDR10 sets the address mode for I2C bus trigger search 1 to ADDR10. SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:ADDRESS:MODE? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:ADDRESS:MODE ADDR7, indicating that the address mode for I2C bus trigger search 2 is set to ADDR7.
Sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
enum - Returns the I2C address mode for the specified bus search.
Sets or queries the binary address string used for an I2C search when the specified search condition is Address or AddressData. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Address value as a 7-bit or 10-bit string depending on the address mode; valid characters are 0-9, A-F, and X for hexadecimal format, and 0, 1, and X otherwise. |
SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:ADDRESS:VALUE "01XXXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:ADDRESS:VALUE?
Sets or queries the binary address string used for the I2C search when the specified search condition is Address or AddressData. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Address value string, either a 7-bit or 10-bit value depending on the address mode; valid characters are 0-9, A-F, and X for hexadecimal format, and 0, 1, and X otherwise. |
string - Returns the address value string for the I2C search address setting.
SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:ADDRESS:VALUE "01XXXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:ADDRESS:VALUE?
Sets or queries the search condition for an I2C bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | ADDRess | ADDRANDDATA | DATa | ACKMISS | REPEATstart | STARt | STOP | Selects the I2C search condition. |
SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:CONDition ADDRess SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:CONDition DATa
Sets or queries the search condition for an I2C bus. The search number is specified by x.
enum - Returns the current I2C search condition.
Sets or queries the direction of the I2C bus data search to determine where to place a mark. Read or write is indicated by the R/W bit in the I2C protocol.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | READ | WRITE | Direction of the data for the I2C bus search. |
enum - Returns the current data direction setting for the I2C bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:DATA:DIRECTION READ SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:DIRECTION?
Sets or queries the I2C bus search data direction used to determine where to place a mark. The search number is specified by x, and read or write is indicated by the R/W bit in the I2C protocol.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | READ | WRITE | Direction of the data for the I2C bus search. |
enum - Returns the current data direction for the I2C bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:DATA:DIRECTION READ sets the data direction for I2C bus trigger search 1 to READ. SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:DIRECTION? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:DIRECTION DONTCARE, indicating that the data direction of the I2C bus trigger search 2 is DONTCare.
Sets the length of the I2C data string, in bytes, used for a bus search to determine where to place a mark. The search number is specified by x, and the search condition must be DATA or ADDRANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Length of the data string in bytes. |
Sets or queries the length of the I2C data string in bytes used for a search mark placement. The search number is specified by x, and the search condition must be DATA or ADDRANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Length of the data string in bytes. |
Sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x, and the search condition must be DATA or ADDRANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| data value | string | - | Binary or hexadecimal data string used for the I2C bus search. |
string - Returns the current data value as a quoted string.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:DATA:VALUE "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:VALUE?
Sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x, and the search condition must be DATA or ADDRANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the data value. |
string - Returns the I2C bus trigger search data value as a quoted string in binary or hexadecimal format.
SEARCH:SEARCH1:TRIGGER:A:BUS:I2C:DATA:VALUE "1001" sets the data value for I2C bus trigger search 1 to SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:VALUE? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:I2C:DATA:VALUE "XX", indicating that the data value for I2C bus trigger search is "XX" in hexadecimal format.
Sets or queries the binary field string used for the I3C bus search when the trigger condition is BCRTYPE. Requires option SRI3C.
This command sets or queries the binary field string used for the I3C bus search when the trigger condition is BCRTYPE. Requires option SRI3C.
Sets or queries the binary field string used for the I3C search when the trigger condition is BCR. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| value | string | - | Data value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C search value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BCR:VALue "1001" sets the BCR value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BCR:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BCR:VALue "1001", indicating that the BCR value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C search when the trigger condition is BCR. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value for which to search. |
string - The current BCR value string for the I3C bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BCR:VALue "1001" sets the BCR value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BCR:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BCR:VALue "1001", indicating that the BCR value for I3C bus Search 2 is 1001 in hexadecimal format.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKetsset / query
Sets or queries the I3C Broadcast Packets search to Broadcast or Response. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | RESPonse | BROadcast | Selects whether the I3C Broadcast Packets search is Response or Broadcast. |
enum - Returns the current I3C Broadcast Packets search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKets RESPonse SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKets BROadcast SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKets?
Sets or queries the I3C Broadcast Packets search mode to Broadcast or Response. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RESPonse | BROadcast | Selects whether the I3C Broadcast Packets search uses Response or Broadcast. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKetsRESPonse SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKetsBROadcast SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BPACKets?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is SETBRGTGT packet ID. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | The value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BRGTID:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BRGTID:VALue?
Sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:BRGTID:VALue "1001" sets the Brgtgt search value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BRGTID:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:BRGTID:VALue "9A", indicating that the Brgtgt search value for I3C bus trigger Search 2 is 9A in hexadecimal format.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is SETBRGTGT packet ID. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search. |
Sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| <QString> | string | - | Specifies the value for which to search. |
string - Returns the value for the command code used in the I3C trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:CCODe:VALue "1001" sets the command code value for I3C bus Search 1 to Binary 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:CCODe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:CCODe:VALue "1001", indicating that the command code value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C bus search when the trigger condition is DCRTYPE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | - | - | Specifies the search number. |
| value | string | - | Specifies the data value for which to search. |
returns
Sets or queries the binary field string used for the I3C bus search when the trigger condition is DCRTYPE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| value | string | - | Specifies the data value for which to search. Valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
returns
Sets or queries the binary field string used for the I3C bus search when the trigger condition is DCR. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search. Valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C bus search value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:DCR:VALue "1001" sets the DCR value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:DCR:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:DCR:VALue "1001", indicating that the DCR value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C bus search when the trigger condition is DCR. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary field string to search for; valid characters are 0, 1, or X in Binary format, and 0-9, A-F, and X in Hexadecimal format. |
string - Returns the binary field string used for the I3C bus search, shown in the same quoted string format.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:DCR:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:DCR:VALue?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is DATAWORDS. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search. Valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:DWORd:VALue "1001" sets the data word value for I3C bus Search 1 to 1001.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is DATAWORDS. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | QString specifying the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:DWORd:VALue "1001" sets the data word value for I3C bus Search 1 to 1001.
Sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Specifies the search number. |
| error type | enum | NACK | TBIT | PARity | BADDr | DADDr | PREamble | CRC | Specifies the error type on which to search. |
enum - Returns the current I3C bus error type condition for the specified search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:ERRORTYPe NACK SEARCH:SEARCH3:TRIGGER:A:BUS:I3C:ERRORTYPe?
Sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires purchase and installation of option SRI3C.
enum - Returns the current I3C bus error type condition for the specified search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:ERRORTYPe NACK SEARCH:SEARCH3:TRIGGER:A:BUS:I3C:ERRORTYPe?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is EVENTBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary field string used for the I3C trigger. |
Sets or queries the binary field string used for the I3C trigger when the trigger condition is EVENTBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary field string used for the I3C trigger. |
Sets or queries the binary field string used for the I3C trigger when the trigger condition is FREQUENCYBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 2 | Specifies the search number. |
| value | string | - | Specifies the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string for the I3C trigger search value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:FREQBYTe:VALue "1001" sets the frequency byte value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:FREQBYTe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:FREQBYTe:VALue "1001", indicating that the frequency byte value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is FREQUENCYBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string for the I3C trigger frequency byte value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:FREQBYTe:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:FREQBYTe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:FREQBYTe:VALue "1001"
Sets or queries the binary field string used for the I3C trigger when the trigger condition is GETSTATUSLSB. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Specifies the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger; the manual example shows the value in quotes.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:GSLSb:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:GSLSb:VALue?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is GETSTATUSLSB. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| QString | string | - | Specifies the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:GSLSb:VALUE "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:GSLSb:VALUE?
Sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSMSB. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary-field string to search for; valid characters are 0, 1, or X in Binary format, and 0-9, A-F, and X in Hexadecimal format. |
string - Returns the binary field string for the I3C trigger search value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:GSMSb:VALue "1001" sets theGetStatus MSb value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:GSMSb:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:GSMSb:VALue "1001", indicating that the GetStatus MSb value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is GETSTATUSMSB. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary field string to search for; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - The current binary field string for the I3C trigger search, returned as a quoted string such as "1001".
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:GSMSb:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:GSMSb:VALue?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALueset / query
Sets or queries the binary field string used for the I3C search when the trigger condition is ENTDAA packet ID. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - The current binary field string used for the I3C search.
Sets or queries the binary field string used for the I3C search when the trigger condition is ENTDAA packet ID. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Specifies the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the binary field string used for the I3C search.
Sets or queries the binary field string used for the I3C search when the trigger condition is INACCURACYBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | QString value for which to search; valid characters are 0, 1, or X for binary format, and 0-9, A-F, and X for hexadecimal format. |
string - Returns the binary field string value for the I3C search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:INACCBYTe:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:INACCBYTe:VALue?
Sets or queries the binary field string used for the I3C search when the trigger condition is INACCURACYBYTE. The value string may be binary or hexadecimal, depending on the characters used.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| value | string | - | Binary field string to search for; valid characters are 0, 1, or X for binary format, and 0-9, A-F, and X for hexadecimal format. |
string - Returns the current I3C inaccuracy byte value for the specified search, in the same quoted QString form used to set it.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:INACCBYTe:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:INACCBYTe:VALue?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXREAD. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | 1 - 6 | Specifies the search number. |
| value | string | - | Specifies the value for which to search. Valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:MAXREAD:VALue "1001" sets the Maximum Read value for I3C bus Search 1 to 1001.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXREAD. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary field string to search for; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:MAXREAD:VALue "1001"
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXRTURN. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value for which to search; valid characters are 0, 1, or X in Binary format, and 0-9, A-F, and X in Hexadecimal format. |
string - Returns the binary field string used for the I3C trigger when the trigger condition is MAXRTURN.
SEARCH:SEARCH5:TRIGGER:A:BUS:I3C:MAXRTURN:VALue "1001" sets the Maximum Read Turnaround value for I3C bus Search 5 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:MAXRTURN:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:MAXRTURN:VALue "1001", indicating that the Maximum Read Turnaround value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXREADTURN. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value for which to search; valid characters are 0, 1, or X in binary format, or 0-9, A-F, and X in hexadecimal format. |
string - The binary field string for the I3C trigger value, shown in the specified format.
SEARCH:SEARCH5:TRIGGER:A:BUS:I3C:MAXRTURN:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:MAXRTURN:VALue?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXWRITE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:MAXWRITe:VALue "1001" sets the Maximum Write value for I3C bus Search 1 to 1001.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is MAXWRITE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:MAXWRITe:VALue "1001"
:SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKetsset / query
Sets or queries the I3C Direct Packets mode for the selected search. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| mode | enum | RESPonse | DIRect | Specifies whether the packet address mode is Response or Direct. |
enum - Returns the current I3C Direct Packets setting.
SEARCH:SEARCH3:TRIGGER:A:BUS:I3C:PACKets DIRect SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:PACKets?
Sets or queries the I3C Direct Packets mode for the specified search. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Specifies the search number. |
| mode | enum | RESPonse | DIRect | Selects whether the packet address mode is Response or Direct. |
enum - Returns the current packet mode for the specified I3C bus search.
SEARCH:SEARCH3:TRIGGER:A:BUS:I3C:PACKets DIRect SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:PACKets?
Sets or queries the binary field string used for the I3C bus search when the trigger condition is SLAVEADDRESS. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Address value to search for; valid characters are 0, 1, or X in Binary format, and A-F, 0-9, and X in Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SADDress:VALue "1001" sets the slave address value for I3C bus trigger search 1 to "1001".
Sets or queries the binary field string used for the I3C bus search when the trigger condition is SLAVEADDRESS. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary field string for the I3C bus search address value; valid characters are 0, 1, or X in Binary format, and A-F, 0-9, and X in Hexadecimal format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SADDress:VALue "1001" sets the slave address value for I3C bus trigger search 1 to "1001".
Sets or queries the SDR broadcast packet type for the specified I3C bus trigger search to determine where to place a mark. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| packet type | enum | ENSLave | DISLave | ENTasx | RSTDya | ENTRDya | SETMwrl | SETMrdl | LSLave | ENTRTSTMode | EXTime | SETaasa | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | SETBUSCON | I3C broadcast packet type to use. |
enum - Returns the current SDR broadcast packet setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SDR:BROADCASTPacket ENSLave
Sets or queries the SDR broadcast packet type for the specified I3C bus trigger search to determine where to place a mark.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Specifies the search number. |
| packet type | enum | ENSLave | DISLave | ENTasx | RSTDya | ENTRDya | SETMwrl | SETMrdl | LSLave | ENTRTSTMode | EXTime | SETaasa | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | SETBUSCON | Specifies the I3C broadcast packet type. |
enum - Returns the selected I3C broadcast packet type for the specified I3C bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SDR:BROADCASTPacket ENSLave
Sets or queries the SDR direct packet type for the specified I3C bus trigger search to determine where to place a mark. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| packet | enum | ENSLave | DISlave | ENTasx | RSTDya | SETMwrl | SETMrdl | SEText | SETDya | SETNdya | GETMWrl | GETMRdl | GETPrid | GETBusch | GETDevch | GETSlave | ACCM | SETBrt | MDATASpeed | HDRCapability | GETXTime | GETCAPS | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | Trigger condition type. |
Sets or queries the SDR direct packet types for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| packet | enum | ENSLave | DISLave | ENTasx | RSTDya | SETMwrl | SETMrdl | SEText | SETDya | SETNdya | GETMWrl | GETMRdl | GETPrid | GETBusch | GETDevch | GETSlave | ACCM | SETBrt | MDATASpeed | HDRCapability | GETXTime | GETCAPS | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | Specifies the trigger condition. |
Sets or queries the binary field string used for the I3C trigger when the trigger condition is STATEBYTE.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | 1 - 8 | Specifies the search number. |
| value | string | - | Specifies the value to search for. Valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the state byte value for the I3C bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:STATEBYTe:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:STATEBYTe:VALue?
Sets or queries the binary field string used for the I3C trigger when the trigger condition is STATEBYTE.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the current binary field string for the I3C trigger state byte value.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:STATEBYTe:VALue "1001" sets the state byte value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:STATEBYTe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:STATEBYTe:VALue "1001", indicating that the state byte value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets the binary field string used for the I3C search when the trigger condition is STATICADDRESS. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| address | string | - | Specifies the binary field string to search for. |
Returns the static I3C address value for the specified search. The value is represented as a binary or hexadecimal field string.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
string - The address value for the specified I3C bus trigger search, returned as a quoted string.
SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:STATic:ADDRess? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:STATic:ADDRess "1001"
Sets or queries the binary field string used for the I3C trigger when the trigger condition is SUPPORTEDBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary field string to search for; valid characters are 0, 1, or X for Binary format, and 0-9, A-F, and X for Hexadecimal format. |
string - Returns the supported byte value for the selected search number.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SUPPORTBYTe:VALue "1001" sets the supported byte value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:SUPPORTBYTe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:SUPPORTBYTe:VALue "1001", indicating that the supported byte value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the binary field string used for the I3C trigger when the trigger condition is SUPPORTEDBYTE. Requires option SRI3C.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary or hexadecimal field string to search for. |
string - Returns the supported byte value for the selected search as a quoted field string.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:SUPPORTBYTe:VALue "1001" SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:SUPPORTBYTe:VALue?
Sets the I3C bus search test mode value for the specified search number. The value is given as a string of valid binary or hexadecimal characters.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| value | string | - | The test mode value to search for. |
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:TESTMODe:VALue "1001" sets the test mode value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:TESTMODe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:TESTMODe:VALue "1001", indicating that the test mode value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the test mode value for an I3C bus search. The search number is specified by x, and the value is the string to search for in binary or hexadecimal format.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| value | string | - | Specifies the value for which to search. |
string - Returns the current test mode value for the specified I3C bus search, as a quoted string.
SEARCH:SEARCH1:TRIGGER:A:BUS:I3C:TESTMODe:VALue "1001" sets the test mode value for I3C bus Search 1 to 1001. SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:TESTMODe:VALue? might return SEARCH:SEARCH2:TRIGGER:A:BUS:I3C:TESTMODe:VALue "1001", indicating that the test mode value for I3C bus Search 2 is 1001 in hexadecimal format.
Sets or queries the condition for a LIN bus search. The search number is specified by x.
enum - Returns the current LIN bus search condition.
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition DATA SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:CONDITION SYNCfield, indicating the trigger condition is sync.
Sets or queries the condition for a LIN bus search. The search number is specified by x.
enum - Returns the current LIN bus search condition.
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition DATA SEARCH:SEARCH1:TRIGger:A:BUS:LIN:CONDition? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:CONDITION SYNCfield, indicating the trigger condition is sync.
Sets or queries the LIN search high-value data string used when the search condition is IDentifier or IDANDDATA. The value is a quoted string of 1s, 0s, or Xs.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Quoted binary data string of 1s, 0s, or Xs used for the LIN search. |
string - Returns the current LIN search high-value data string.
SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:HIVALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:HIVALUE "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" indicating the high value is "don't care".
Queries the high value LIN data search string for the specified search number. The returned string is a quoted sequence of 1s, 0s, or Xs used when the search condition is Identifier or IDANDDATA.
string - Returns the binary data string used for a LIN search high value; a string of 1s, 0s, or Xs in quotes.
Sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | LESSEQual | MOREEQual | UNEQual | LESSthan | MOREthan | INrange | OUTrange | Sets the data qualifier to the selected comparison mode. |
enum - Returns the current LIN bus data qualifier.
SEARCH:SEARCH2:TRIGger:A:BUS:LIN:DATa:QUALifier LESSthan SEARCH:SEARCH1:TRIGger:A:BUS:LIN:DATa:QUALifier?
Sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
enum - Returns the current data qualifier.
SEARCH:SEARCH2:TRIGger:A:BUS:LIN:DATa:QUALifier LESSthan SEARCH:SEARCH1:TRIGger:A:BUS:LIN:DATa:QUALifier?
Sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Sets or queries the data string used for a LIN bus search. The search number is specified by x, and the search condition must be DATA or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data string used for the LIN bus search. |
string - Returns the current data string used for the LIN bus search.
SEARCH:SEARCH2:TRIGger:A:BUS:LIN:DATa:VALue 1010 sets the data value to XXXXXX1010. SEARCH:SEARCH1:TRIGger:A:BUS:LIN:DATa:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:VALUE "XXXXXXXXXX", indicating that the data value is a don’t care.
Sets or queries the data string used for a LIN bus search. The search number is specified by x, and the search condition must be DATA or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Data value string to use for the LIN bus search. |
string - Returns the current data value string for the LIN bus search.
SEARCH:SEARCH2:TRIGger:A:BUS:LIN:DATa:VALue 1010 sets the data value to XXXXXX1010. SEARCH:SEARCH1:TRIGger:A:BUS:LIN:DATa:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:DATA:VALUE "XXXXXXXXXX", indicating that the data value is a don’t care.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPEset / query
Sets or queries the error type for a LIN bus search. The search number is specified by x, and the search condition must be set to ERROR.
Sets or queries the error type for a LIN bus search. The search number is specified by x, and the search condition must be set to ERROR.
Sets or queries the string used for a LIN bus identifier value. The search number is specified by x, and the search condition must be IDENTIFIER or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the identifier value. |
string - Returns the LIN bus identifier value string.
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:IDentifier:VALue 1010 sets the identifier value to XX1010. SEARCH:SEARCH1:TRIGger:A:BUS:LIN:IDentifier:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:IDENTIFIER:VALUE "XXXXXX", which indicates the identifier value is don’t care.
Sets or queries the string used for a LIN bus identifier value. The search number is specified by x, and the search condition must be IDENTIFIER or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the identifier value. |
string - Returns the LIN bus identifier value string.
SEARCH:SEARCH1:TRIGger:A:BUS:LIN:IDentifier:VALue 1010 sets the identifier value to XX1010. SEARCH:SEARCH1:TRIGger:A:BUS:LIN:IDentifier:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:LIN:IDENTIFIER:VALUE "XXXXXX", which indicates the identifier value is don’t care.
This command specifies a field or condition for a Manchester bus to search on. The search number is specified by x.
Specifies a field or condition for a Manchester bus to search on. The search number is specified by x.
Specifies the number of bits per word for the specified Manchester bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| data string | integer | 1 - 5 | Specifies the data string in a valid format. |
Specifies the number of bits per word for the specified Manchester bus search. The search number is specified by x.
integer - Returns the data string in a valid format, representing the number of bits per word. The minimum and default values are 1 and the maximum value is 5.
Specifies the binary string used for Manchester triggering when the search condition is set to data. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data value. |
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue "00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue "00001000", indicating that binary is the value to be used while searching.
Specifies the binary string used for Manchester triggering when the search condition is set to data. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data value. |
string - Returns the current data value used for Manchester triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue "00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue "00001000", indicating that binary is the value to be used while searching.
Sets or queries the error type to be used when searching on a Manchester signal. The search condition must be set to error, and the search number is specified by <x>.
enum - Returns the currently selected Manchester error type.
Sets or queries which error type is used when searching on a Manchester signal. The search condition must be set to error.
enum - Returns the currently selected Manchester search error type.
Specifies the binary string used for Manchester triggering when the trigger condition is header while searching on a Manchester signal. The search number is specified by <x>, and the search condition must be set to header.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Header value. |
string - Returns the header value currently set for Manchester triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:HEADER:VALue"00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000", indicating the binary header value to be used while searching.
Specifies the binary string used for Manchester triggering when the trigger condition is header while searching on a Manchester signal. The search condition must be set to header, and the search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The header value. |
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:HEADER:VALue"00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000", indicating the binary header value to be used while searching.
Specifies the binary string used for Manchester triggering when the trigger condition is DATA. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Binary string used for Manchester triggering. |
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000" specifies binary as the value to be used SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000", indicating the binary header value to be used while searching.
Specifies the binary string used for Manchester triggering when the trigger condition is DATA. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary string used for Manchester triggering. |
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:DATa:VALue"00001000", indicating the binary header value to be used while searching.
Specifies the binary string used for Manchester triggering when the trigger condition is Sync during a search on a Manchester signal. The search number is specified by <x> and the search condition must be set to Sync.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary string to use while searching. |
Specifies the binary string used for Manchester triggering when the trigger condition is Sync while searching on a Manchester signal. The search condition must be set to Sync, and the search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Data string in a valid format. |
string - Returns the current binary string value used for Manchester triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:MANChesterDATAOFF:VALue "00001000" SEARCH:SEARCH1:TRIGger:A:BUS:MANChesterDATAOFF:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:MANChesterDATAOFF:VALue"00001000"
Specifies the binary string used for Manchester triggering when the trigger condition is Trailer. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data string in a valid format. |
string - Returns the specified binary value string used for searching.
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue "00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue "00001000", indicating the binary value to be used while searching.
Specifies the binary string used for Manchester triggering when the trigger condition is Trailer while searching on a Manchester signal. The search number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data string in a valid format. |
returns
SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue "00001000" specifies binary as the value to be used while searching. SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:MANChester:TRAILER:VALue "00001000", indicating the binary value to be used while searching.
Specifies the binary address string used for MDIO triggering when the trigger condition is address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The address value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:ADDress:VALue "XXXXXXXXXXXXXXXX" specifies address value as the field within a MDIO frame to search on.
This command specifies the binary address string used for MDIO triggering when the trigger condition is Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The address value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:ADDress:VALue "XXXXXXXXXXXXXXXX" specifies address value as the field within a MDIO frame to search on.
Sets or queries the trigger condition for MDIO bus search. The search number is specified by x.
enum - Returns the currently specified MDIO frame field used for searching.
Sets or queries the trigger condition for MDIO bus search. The search number is specified by x.
enum - Returns the currently specified MDIO trigger condition.
Specifies the binary data string used for MDIO triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string used for MDIO triggering. |
Specifies the binary data string used for MDIO triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string used for MDIO triggering. |
Specifies the binary device type string used for MDIO triggering when the trigger condition is Device type. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary device type string used for MDIO triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue "XXXXX" specifies device type as the field within a MDIO frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue"XXXXX", indicating that device type is the currently specified field within a MDIO frame to search on.
Specifies the binary device type string used for MDIO triggering when the trigger condition is Device type. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | The device type string to use. |
string - Returns the currently specified device type string for the MDIO trigger field.
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue "XXXXX" specifies device type as the field within a SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:DEVicetype:VALue"XXXXX", indicating that device type is the currently specified field within a MDIO frame to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRTypeset / query
Sets or queries the MDIO error type used when triggering on MDIO data. This applies when the MDIO bus trigger condition is set to Error.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | OPCODEERRor | DEVERRor | ANY | Error type to use for MDIO triggering. |
Sets or queries the error type to be used when triggering on MDIO data when the MDIO bus trigger condition is set to error. The search number is specified by x.
enum - Returns the currently specified MDIO error type.
Specifies the binary op-code string used for MDIO triggering when the trigger condition is op-code. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The op-code value. |
string - Returns the currently specified op-code value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:OPCode:VALue "XX" specifies op-code value as the field within a MDIO frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:OPCode:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:OPCode:VALue "XX", indicating that op-code value is the currently specified field within a MDIO frame to search on.
Specifies the binary op-code string used for MDIO triggering when the trigger condition is op-code. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Op-code string to use for MDIO triggering. |
string - Returns the currently specified op-code value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:OPCode:VALue "XX" SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:OPCode:VALue?
Specifies the binary physical address string used for MDIO triggering when the trigger condition is physical address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary physical address string used for MDIO triggering. |
Specifies the binary physical address string used for MDIO triggering when the trigger condition is physical address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary physical address string used for MDIO triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:PHYSicaladdress:VALue?
Sets the binary register address string used for MDIO triggering when the trigger condition is register address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | The register address value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:REGisteraddress:VALue "XXXXX" specifies register address as the field within a MDIO frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:REGisteraddress:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:REGisteraddress:VALue "XXXXX", indicating that register address is the currently specified field within a MDIO frame to search on.
Sets or queries the binary register address string used for MDIO triggering when the trigger condition is register address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Register address value. |
string - Returns the currently specified register address value as a string.
SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:REGisteraddress:VALue "XXXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:MDIO:REGisteraddress:VALue?
Sets the high value used when searching on MIL-STD-1553 command word addresses. The search number is specified by x, and the search condition must be COMMAND with the address qualifier set to INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High address value used for the search. |
Sets the high value used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be COMMAND with the address qualifier set to INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High value for the command word address search. |
Sets or queries the qualifier used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier used for the address search. |
enum - Returns the current address qualifier for command word address searching.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:ADDRESS:QUALIFIERLESSTHAN sets the address qualifier to less than. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the qualifier used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to COMMAND.
enum - Returns the current address qualifier setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:ADDRESS:QUALIFIERLESSTHAN sets the address qualifier to less than. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the low value used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Low address value used for the command-word address search. |
string - Returns the current low address value used for the command-word address search.
Sets or queries the low value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to COMMAND.
Sets or queries the value of the command word "word count" field for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Word count value. |
string - The current word count value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:COUNT "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:COUNT? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word "word count" field for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| count | string | - | Word count value. |
string - Returns the current word count value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:COUNT "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:COUNT? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
Sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Word count value. |
string - Returns the current command word subaddress value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus to search on. The search condition must be set to COMMAND.
string - Returns the command word subaddress value currently set for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
This command sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to COMMAND.
This command sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | COMMAND | STATus | DATA | ERRor | Specifies the search condition to use. |
enum - Returns the current MIL-STD-1553 search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:CONDITION DATA specifies finding matching data word(s). SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:CONDITION? might return SYNC, indicating that the bus is being searched for sync pulses found in any word.
Sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
enum - Returns the current search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:CONDITION DATA specifies finding matching data word(s). SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:CONDITION? might return SYNC, indicating that the bus is being searched for sync pulses found in any word.
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to DATA.
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to DATA.
Sets or queries the data value used when searching on MIL-STD-1553 bus data words. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | The data value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:DATA:VALUE "XXXXXXXXXXXX1000" SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:DATA:VALUE? might return "XXXXXXXXXXXXXXXX"
Sets or queries the data value used when searching on MIL-STD-1553 bus data words. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data value. |
string - Returns the current data value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:DATA:VALUE "XXXXXXXXXXXX1000" sets the value to XXXXXXXXXXXXXXXX. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:DATA:VALUE? might return "XXXXXXXXXXXXXXXX", indicating that the value is XXXXXXXXXXXXXXXX.
Sets the type of error condition for a MIL-STD-1553 bus search, with the search number specified by x. The search condition must be set to ERRor.
Sets the type of error condition to search on for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to ERRor.
Sets or queries the high value used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be STATus with the address qualifier set to INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The address value. |
string - Returns the current address value.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:HIVALUE "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:HIVALUE? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the high value used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to STATus with the address qualifier INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| address value | string | - | Address value to set as the high value. |
string - Returns the current high value address setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:HIVALUE "X1000" sets the value to X1000. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:HIVALUE? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Sets the data qualifier to equal, unequal, less than, more than, less equal, more equal, in range, or out of range. |
enum - Returns the current address qualifier setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:QUALIFIERLESSTHAN SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Sets the data qualifier to equal, unequal, less than, more than, less equal, more equal, in range, or out of range. |
enum - Returns the current address qualifier setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:QUALIFIERLESSTHAN sets the address qualifier to less than. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Low address value used for the status-word address search. |
Sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | - | - | Low value used when searching on status word addresses. |
Sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a MIL-STD-1553 status word used for search. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether the BCR bit must be 1, must be 0, or is ignored in filtering. |
enum - Returns the current BCR-bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:BCR ONE specifies filtering status words for those where the BCR bit has a value of 1. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:BCR? might return NOCARE, indicating that status words are not being filtered based on the BCR bit value.
Sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words are filtered on the BCR bit value or not. |
enum - Returns the current BCR-bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:BCR ONE specifies filtering status words for those where the BCR bit has a value of 1. SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:BCR? might return NOCARE, indicating that status words are not being filtered based on the BCR bit value.
Sets or queries the value of the busy bit (BUSY bit, bit 16) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether the BUSY bit must be 1, 0, or ignored. |
Sets or queries the value of the busy bit (BUSY bit, bit 16) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether the BUSY bit must be 1, must be 0, or is not used for filtering. |
Sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words are filtered on the DBCA bit value, or whether the bit is not used for filtering. |
enum - Returns the current DBCA bit filter state.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:DBCA ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:DBCA?
Sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a MIL-STD-1553 status word to search on. The search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words are filtered by the DBCA bit value. |
enum - Returns the current DBCA-bit filter state.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:DBCA ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:DBCA?
Sets or queries the instrumentation bit (INSTR bit, bit 10) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filters status words based on the INSTR bit value. |
enum - Returns the filtering state of the INSTR bit.
Sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
enum - Returns the current filtering state for the INSTR bit.
Sets or queries the value of the message error bit (ME bit, bit 9) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words are filtered on the ME bit value or not. |
enum - Returns the current ME-bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:ME ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:ME?
Sets or queries the value of the message error bit (ME bit, bit 9) in a MIL-STD-1553 status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| state | enum | ONE | ZERo | NOCARE | Filters status words based on the ME bit value, or disables filtering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:ME ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:ME? might return NOCARE, indicating that status words are not being filtered based on the ME bit value.
Sets the value of the status word service request bit (SRQ bit, bit 11) in a MIL-STD-1553 status word to search on. The search number is specified by x and the search condition must be set to STATus.
Sets or queries the value of the status word service request bit (SRQ bit, bit 11) in a MIL-STD-1553 bus status word to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| bit state | enum | ONE | ZERo | NOCARE | Controls whether status words are filtered on the SRQ bit being 1, 0, or not cared about. |
Sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a MIL-STD-1553 status word to search on. The search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words match SUBSF bit value 1, SUBSF bit value 0, or are not filtered on this bit. |
enum - Returns the current SUBSF bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:SUBSF ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:SUBSF?
Sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a MIL-STD-1553 status word to search on. The search condition must be STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Filters status words on the SUBSF bit value: 1, 0, or no filtering. |
enum - Returns the current SUBSF bit filtering state.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:SUBSF ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:SUBSF? might return NOCARE, indicating that status words are not being filtered based on the SUBSF bit value.
Sets or queries the value of the TF bit to search on for a MIL-STD-1553 status word. The search number is specified by x and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filters status words based on the TF bit value. |
enum - Returns the TF-bit filter state.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:TF ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:TF?
Sets or queries the value of the status word TF bit for a MIL-STD-1553 bus search. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Filters status words based on the TF bit value. |
enum - Returns the current TF-bit filter setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:TF ONE specifies filtering status words for those where SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:BIT:TF? might return NOCARE, indicating that status words are not being filtered based on the TF bit value.
Sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Selects whether the parity bit must be 1, 0, or not cared about. |
enum - Returns the current parity-bit search setting.
Sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x, and the search condition must be set to STATus.
enum - Returns the current parity-bit search setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:PARITY ONE SEARCH:SEARCH1:TRIGGER:A:BUS:MIL1553B:STATUS:PARITY?
Sets the NFC command code used for trigger A bus search for the specified search number. The value selects one of the listed 15693/14443A/14443B/DEP-related command codes.
| Name | Type | Values | Description |
|---|---|---|---|
| code | enum | INVentory | STAYQUIet | RFU | RDSBLOCk | WRSBLOCk | LOCKBLOCk | RDMBLOCk | WRMBLOCk | SELECT15693SET | RSTTOREADy | WRITEAFI | LOCKAFI | WRITEDSFID | LOCKDSFID | GETSYSTEMINFo | GETMBSECSYSTem | FRDMBLOCk | EXRDSBLOCk | EXWRSBLOCk | EXLOCKBLOCk | EXRDMBLOCk | AUTHenticate | KEYUPDate | AUTHCRYPto | SECURECRYPto | CHALlenge | READBUFFer | EXGETSYSTINFo | EXGETMBSSTATus | FEXRDMBLOCks | custom | REQa | WUPa | PROPrietary | SELECT14443A | HLTa | REQB | WUPB | SLOTMARKER | ATTRIB | HLTB | ANY | ATRReq | WUPReq | PSLReq | DEPReq | DSLReq | RLSReq | Command code to search on. |
Sets or queries the command code to search on for NFC triggering. The available codes depend on the NFC standard, including 15693, 14443A, 14443B, and FeliCa command codes.
| Name | Type | Values | Description |
|---|---|---|---|
| code | enum | INVentory | STAYQUIet | RFU | RDSBLOCk | WRSBLOCk | LOCKBLOCk | RDMBLOCk | WRMBLOCk | SELECT15693SET | RSTTOREADy | WRITEAFI | LOCKAFI | WRITEDSFID | LOCKDSFID | GETSYSTEMINFo | GETMBSECSYSTem | FRDMBLOCk | EXRDSBLOCk | EXWRSBLOCk | EXLOCKBLOCk | EXRDMBLOCk | AUTHenticate | KEYUPDate | AUTHCRYPto | SECURECRYPto | CHALlenge | READBUFFer | EXGETSYSTINFo | EXGETMBSSTATus | FEXRDMBLOCks | custom | REQa | WUPa | PROPrietary | SELECT14443A | HLTa | REQB | WUPB | SLOTMARKER | ATTRIB | HLTB | ANY | ATRReq | WUPReq | PSLReq | DEPReq | DSLReq | RLSReq | Command code to search on. |
string - Returns the currently specified NFC command code for the selected search.
SEARCH:SEARCH1:TRIGGER:A:BUS:NFC:COMMand:CODe SELECT15693SET specifies select command code to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:NFC:COMMand:CODe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:NFC:COMMand:CODe SELECT15693SET, indicating that select command code is the currently specified field to search on.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADerset / query
Sets or queries the Sync header type for Custom pattern triggering on a PCIe Gen 3 search. The search number is specified by x; this command requires option SRPCIE321.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CONTROL | DATA | EITHER | Selects the PCIe Sync header type to use for the search condition. |
Sets or queries the custom data pattern to trigger on for search x. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
string - Returns the custom data pattern setting.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:CUSTom:DHEAder "000000011" SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:CUSTom:DHEAder?
Sets or queries the data value used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 4095 | Data string in a valid format. |
integer - Returns the current DLLP Flow control data value.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue 0 SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue?
Sets or queries the number of symbols in the custom pattern to trigger on. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 0 - 16 | Specifies the data string in a valid format. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols 4 sets the number of symbols in custom pattern for search 1 to 4. SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols 5, indicating that number of symbols in custom pattern for search 1 is set to 5.
Sets or queries the header credits to be used for DLLP flow control when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 4095 | Data string in a valid format. |
Sets or queries the data value used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 4095 | Specifies the data string in a valid format. |
integer - Returns the Virtual channel value of DLLP for the specified search, as set by the command.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue 4 SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue?
Sets or queries the ordered set trigger condition for a PCIe bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TS1 | TS2 | EIOS | EIEOS | FTS | SDS | SKP | Ordered set trigger condition. |
:SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNCset / query
Sets or queries the Sync header type to trigger on a PCIe Gen 3. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ORDSET | DATA | INVALID | Selects the Sync header type search condition. |
enum - Returns the current Sync header type setting for the specified search number.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:SYNC ORDSET SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:SYNC?
Sets or queries the trigger condition for Address Mode of TLP in PCIe Gen 3. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ADDR32 | ADDR64 | Selects the TLP Address Mode condition. |
Sets the binary data value used for Address High of TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AHIGh "0000001100000000000000000000000001" sets the Address High of TLP for search 1 to 0000001100000000000000000000000001. SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AHIGh? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AHIGh "0000001100000000000000000000000001", indicating that the Address High of TLP for search 1 is set to 0000001100000000000000000000000001.
Sets the binary data value used for Address Low of TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
Sets or queries the trigger condition for the type of Atomic Operation of a PCIe TLP. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | FADD | SWAP | CAS | Search condition for the TLP Atomic Operation type. |
enum - Returns the current TLP AOTYPE setting for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AOTYpe FADD SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AOTYpe? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:AOTYpe SWAP, indicating the TLP AOTYPE for search 1 is set to SWAP.
Sets the binary data value used for the Bus Number of TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | block | - | Binary block data string. |
Sets or queries the trigger condition for the direction of TLP in a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | EITHER | READ | WRITE | Specifies the TLP direction search condition. |
enum - Returns the current TLP direction setting for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:DIRection READ sets the TLP direction for search 1 to READ. SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:DIRection? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:DIRection WRITE, indicating the TLP direction for search 1 is set to WRITE.
Sets the binary data value used for the Message Code of a PCIe TLP trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
Sets the binary data value used for the Prefix of TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:PREFix "0010" sets the Prefix of TLP for search 1 to 0010. SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:PREFix? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:PREFix "0001", indicating that the Prefix of TLP for search 1 is set to 0001.
Sets or queries the trigger condition for the Prefix Type of TLP in PCIe bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | LOCAL | ENEND | Trigger condition for the Prefix Type of TLP. |
:SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RIDset / query
Sets the binary data value used for the Requester ID of a PCIe TLP trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string to use as the Requester ID. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:RID "00000001100000000" SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:RID? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:RID "0000000001000000", indicating that the Requester for search 1 is set to 0000000001000000.
Sets the binary data value used for the Sequence number of a TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary block data string. |
Sets the binary data value used for the Steering tag of TLP when triggering on a PCIe bus signal. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | block | - | Specifies the binary block data string. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:STAG "0000000110000" sets the Steering Tag of TLP for search 1 to 0000000110000. SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:STAG? might return SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:STAG "000000000100", indicating that the Steering tag of TLP for search 1 is set to 000000000100.
Sets or queries the trigger condition for a PCIe bus on a specific TLP symbol. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | MEMORY | IO | CONFIG | MESSAGE | COMPLETION | AOPERATION | PREFIX | Trigger condition for the PCIe bus on the specified TLP symbol. |
SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:TYPe ANY SEARCH:SEARCH1:TRIGger:A:BUS:PCIE:TLP:TYPe?
Sets or queries the trigger condition for a PSI5 bus. The search number is specified by x.
Sets or queries the PSI5 search trigger A bus condition used for PSI5 triggering. The search condition selects which field within a PSI5 frame to search on.
enum - Returns the currently specified PSI5 search trigger A bus condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:CONDition STARt SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:CONDition?
Sets or queries the binary register address string used for PSI5 triggering when the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FOURBIT | EIGHTBIT | TWENTYBIT | Selects the data bit value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATABITs FOURBIT SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATABITs?
Sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
enum - Returns the current PSI5 data-bit setting.
Sets or queries the binary Data string used for PSI5 triggering when the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the value of the data string; valid characters are 0, 1, and X in binary format, or A-F, 0-9, and X in hexadecimal format. |
string - Returns the current binary Data string used for PSI5 triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:DATa:ECU:Sens or:VALue "01111001" SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:DATa:ECU:Sens or:VALue? might return :SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:DATa:ECU:Sens or:VALue "0111100111"
Sets or queries the binary Data string used for PSI5 triggering when the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the value of the data string. Valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format. |
string - Returns the current data string value.
SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SensOR:VALue "01111001" SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SensOR:VALue?
Sets or queries the binary data string used for PSI5 triggering when the trigger condition is data region A. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string value. |
string - Returns the current data value string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:A:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:A:VALue?
Sets or queries the binary data string used for PSI5 triggering when the trigger condition is data region B. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string value; valid characters are 0, 1, and X in binary format, or A-F, 0-9, and X in hexadecimal format. |
returns
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue "0111100111" sets the data value as "0111100111". SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:A:VALue "0111100111", indicating that the data value is "0111100111".
Sets or queries the binary data string used for PSI5 triggering when the trigger condition is data region B. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the value of the data string. |
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue?
Sets or queries the binary data string used for PSI5 triggering when the trigger condition is data region B. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Specifies the data string value. |
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:DATa:REGion:B:VALue?
Specifies the error type value as response code.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:ERRORTYPe PARity SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:ERRORTYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:ERRORTYPe PARity, indicating that parity is the current specified field within a PSI5 frame to search on.
Queries the error type setting for PSI5 triggering. The value is returned as a response code.
enum - Returns the error type value as a response code.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:ERRORTYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:ERRORTYPe PARity, indicating that parity is the current specified field within a PSI5 frame to search on.
Sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value of the data string. |
string - Returns the current binary data string used for PSI5 triggering when the trigger condition is a Function Code.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe "011" specifies function code as "011". SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe "011", indicating that Function Code Type is currently "011".
Sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Value of the data string. Valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format. |
string - Returns the current Function Code Type data string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe "011" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:FUNCTIONCODETYPe "011", indicating that Function Code Type is currently "011".
Sets or queries the register address for the PSI5 bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TWOBIT | SIXBIT | EIGHTBIT | Selects the register address value width. |
Sets or queries the register address for the PSI5 bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | TWOBIT | SIXBIT | EIGHTBIT | Selects the register address width. |
Sets the binary register address string used for PSI5 triggering when the trigger condition is Register Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The binary register address string value. |
Sets or queries the binary sensor address string used for PSI5 triggering when the trigger condition is Sensor Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the value of the data string. |
string - Returns the current sensor address value string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSor:ADDRess:VALue "101" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSor:ADDRess:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSor:ADDRess:VALue "101"
Sets or queries the binary sensor address string used for PSI5 triggering when the trigger condition is Sensor Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The value of the data string. |
string - The current sensor address value as a binary or hexadecimal string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSor:ADDRess:VALue "101" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSor:ADDRess:VALue?
Queries the value of the PSI5 register address data string for trigger A. The value is a data string whose characters may be binary or hexadecimal X-coded digits.
string - Returns the register address value as a quoted data string in the same format used to set it.
SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue "0111100111" SEARCH:SEARCH1:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue?
Sets or queries the sensor status for PSI5 bus. Requires option SR-PSI5.
| Name | Type | Values | Description |
|---|---|---|---|
| status | enum | READy | BUSY | DEFect | SERVICEMODe | UNLocked | Sensor status to use for PSI5 triggering. |
enum - Returns the specified sensor status for a PSI5 frame search.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSORSTATus:TYPe READy SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSORSTATus:TYPe?
Sets or queries the sensor status for PSI5 bus. Requires option SR-PSI5.
enum - Returns the sensor status for PSI5 bus.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSORSTATus:TYPe READy SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:SENSORSTATus:TYPe?
Sets or queries the value string used for a bus search status match. The string may contain binary or hexadecimal characters, depending on format.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the value of the data string. |
string - Returns the current status value string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:STATus:VALue "10" SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:STATus:VALue?
Returns the value of the status data string for a PSIFIVe bus search. The value is specified as a quoted string of binary or hexadecimal characters.
returns - Returns the current status value as a quoted data string.
SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:STATus:VALue "10" specifies the status value as "10". SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:STATus:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:PSIFIVe:STATus:VALue "10", indicating that the status value is 10.
Sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | DATa | EOp | PARItyerror | STARt | Selects the RS232C bus search condition. |
enum - Returns the currently selected RS232C bus search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:CONDITION DATA sets the search condition for RS232C bus trigger search 1 to Data. SEARCH:SEARCH2:TRIGGER:A:BUS:RS232C:CONDITION? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:RS232C:CONDITION EOP, indicating that the search condition for RS232C bus trigger search 2 is set to End of Packet.
Sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
enum - Returns the current RS232C bus search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:CONDITION DATA sets the search condition for RS232C bus trigger search 1 to Data. SEARCH:SEARCH2:TRIGGER:A:BUS:RS232C:CONDITION? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:RS232C:CONDITION EOP, indicating that the search condition for RS232C bus trigger search 2 is set to End of Packet.
Sets or queries the length of the data string in bytes used for an RS232 bus search when the search condition is Data. The search number is specified by x.
Sets or queries the length of the data string in bytes for an RS232 bus search. The search number is specified by x, and the setting is used when the search condition is Data.
Sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Specifies the value of the data string. |
string - Returns the current data string value for the specified RS232C bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:DATA:VALUE "01" SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:DATA:VALUE?
Sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data; the search number is specified by x.
string - Returns the data string value for the specified RS232C bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:DATA:VALUE "01" SEARCH:SEARCH1:TRIGGER:A:BUS:RS232C:DATA:VALUE?
Sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Sets or queries the disparity used when searching on an 8B10b signal. The search condition must be set to Symbols > 8-bit.
| Name | Type | Values | Description |
|---|---|---|---|
| disparity | enum | POSITIVe | NEGAtive | EITHer | Disparity to use for the 8B10b search. |
Sets or queries the disparity to be used when searching on an 8B10b signal. The search condition must be set to Symbols > 8-bit.
enum - Returns the currently specified disparity used for 8B10b search.
SEARCH:SEARCH1:TRIGGER:A:BUS:S8B10B:DISParity?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRorset / query
Sets or queries the error type used when searching on an 8B10b signal. The search condition must be set to Errors.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | SYMBol | DISParity | Specifies the error type to search for. |
enum - Returns the current error type.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:ERRor DISParity SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:ERRor? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:S8B10B:ERRor DISPARITY, indicating the Error type to be disparity.
Sets or queries the 8B10b error type used for searching on an 8B10b signal. The search condition must be set to Errors.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | SYMBol | DISParity | Specifies the error type to use for the search. |
enum - Returns the current 8B10b search error type.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:ERRor DISParity sets the error type to Disparity. SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:ERRor? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:S8B10B:ERRor DISPARITY, indicating the Error type to be disparity.
Sets or queries the control symbol value used when searching on an 8B10b signal. The search condition must be set to Symbols; the default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | Control symbol value to use for the search. |
Sets or queries the control symbol value used when searching on an 8b10b signal. The search condition must be set to Symbols, and the default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | Control symbol value to use for the search. |
This command specifies the 8 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care); the search condition must be set to Symbols.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | 8 bit value to be used while searching. |
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue "00001000" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Sets the 8-bit value used when searching on an 8b10b signal. The search condition must be set to Symbols, and the default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | 8-bit value to be used while searching. |
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue "00001000" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Sets or queries the mode of data search used when searching on an 8b10b signal. The search condition must be set to Symbols.
Sets or queries the mode of data search to be used when searching on an 8b10b signal. The search condition must be set to Symbols.
Specifies the 10-bit RD negative value used when searching on an 8b10b signal. The search condition must be set to Symbols, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the 10-bit RD negative value. |
Specifies the 10-bit RD negative value used when searching on an 8b10b signal. The search condition must be set to Symbols, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The 10-bit RD negative value. |
Specifies the 10 bit RD positive value to be used when searching on an 8b10b signal. The search condition must be set to Symbols, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| <QString> | string | - | The 10 bit RD positive value. |
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos "0011101010" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Specifies the 10-bit RD positive value to use when searching on an 8b10b signal. The search condition must be set to Symbols, and x identifies the search number.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The 10-bit RD positive value to be used while searching. |
string - Returns the current 10-bit RD positive search value as a quoted string; the example also shows the corresponding hexadecimal value used while searching.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos "0011101010" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Specifies the 10-bit value to be used when searching on an 8b10b signal. The search condition must be set to Symbols, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The 10-bit value to use while searching. |
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue "0011101010" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Specifies the 10-bit value to be used when searching on an 8b10b signal. The search condition must be set to Symbols, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| value | string | - | 10-bit value to use while searching. |
string - Returns the present 10-bit search value. The response may be shown as both binary and hexadecimal representations.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue "0011101010" SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Sets or queries the symbol type used when searching on 8b10b signals. The search condition must be set to Symbols.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | DATa | CONTrol | Specifies whether to search for Data Symbols or Control Symbols. |
enum - Returns the current symbol type used for the search.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TYPe DATA sets the symbol type to data. SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TYPe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:S8B10B:SYMbol:TYPe DATA, indicating the symbol type to be data.
Sets or queries the type of symbol used when searching on 8b10b signals. The search condition must be set to Symbols.
enum - Returns the current symbol type.
SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TYPe DATA SEARCH:SEARCH1:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
Specifies the address type in an SDLC frame. The address type can be Broadcast or No-Station, and an address value can also be specified.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | Broadcast | No-Station | Address type in the SDLC frame. |
This command specifies the address type in an SDLC frame. The address can be set to Broadcast, No-Station, or a specified address value.
Sets or queries the trigger condition for an SDLC bus. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | STARt | DATa | ABORt | ADDRess | UNNumbered | INFormation | SUPervisory | ERRors | END | Trigger condition to search on within an SDLC frame. |
enum - Returns the current trigger condition for the specified search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:CONDition STARt SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:CONDition?
Sets or queries the trigger condition for an SDLC bus search. Requires option SR-SDLC.
enum - Returns the current trigger condition for the SDLC bus search.
Specifies the length of the SDLC data string in bytes used for triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | integer | 1 - 5 | Length of the data string in bytes. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe 4 sets the data size value as 4. SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe 4, indicating that the data size value is 4.
Specifies the length of the data string in bytes used for SDLC triggering when the trigger condition is DATA. The search number is specified by x.
integer - Returns the data size value in bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe 4 SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:SIZe 4, indicating that the data size value is 4.
Specifies the binary data string used for SDLC triggering when the trigger condition is DATA. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string value to use for SDLC triggering. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:VALue "0111100111" sets the Data value as "0111100111".
Specifies the binary data string used for SDLC triggering when the trigger condition is DATA. The search number is specified by x.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:DATa:VALue "0111100111" sets the Data value as "0111100111".
Sets or queries the SDLC bus error type for the specified search. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | The number of the search. |
| error type | enum | FCS | NUMERICORDer | Selects the SDLC bus error type. |
enum - Returns the currently specified SDLC bus error type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:ERROR:TYPe FCS SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:ERROR:TYPe?
Sets or queries the SDLC bus Error Type for the specified search. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | The number of the search. |
| error type | enum | FCS | NUMERICORDer | Selects the SDLC Error Type. |
enum - Returns the currently specified SDLC Error Type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:ERROR:TYPe FCS SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:ERROR:TYPe?
Sets or queries the Frame Type in SDLC bus for the specified search. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | The number of the search. |
| frame type | enum | COMMand | RESPonse | BOTH | Selects the SDLC frame type. |
Sets or queries the frame type in an SDLC bus search. Requires option SR-SDLC.
enum - Returns the current SDLC frame type.
Specifies the binary Station Address string used for SDLC triggering when the trigger condition is Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value of the data string. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:STADDress:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:STADDress:VALue?
Specifies the binary Station Address string used for SDLC triggering when the trigger condition is Address. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Value of the data string. |
string - Returns the current Station Address value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:STADDress:VALue "0111100111" SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:STADDress:VALue?
Sets or queries the Supervisory Frame Type in SDLC bus.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | RR | RNR | REJ | Selects the supervisory frame type. |
Sets or queries the Supervisory Frame Type in SDLC bus.
enum - Returns the current Supervisory Frame Type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:SUPervisory:FRAMETYPe RR SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:SUPervisory:FRAMETYPe?
Sets or queries the Unnumbered Frame Type in SDLC bus. Requires option SR-SDLC.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | UP | UI | SNRM | SNRME | REQDISConnect | UACK | REQSETINIT | DISCMODe | FRAMEREJ | TEST | XID | CONFigure | BEACon | Selects the SDLC unnumbered frame type. |
enum - Returns the currently specified SDLC unnumbered frame type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:UNNumbered:FRAMETYPe UI SEARCH:SEARCH1:TRIGGER:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Sets or queries the Unnumbered Frame Type in the SDLC bus search trigger. Requires the SR-SDLC option.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | UP | UI | SNRM | SNRME | REQDISConnect | UACK | REQSETINIT | DISCMODe | FRAMEREJ | TEST | XID | CONFigure | BEACon | Unnumbered frame type to search on. |
enum - Returns the currently specified SDLC Unnumbered Frame Type.
SEARCH:SEARCH1:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Sets or queries the search condition for a SENT bus search. Requires the SRAUTOSEN option.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | START | FAST | SLOW | PAUSE | ERRor | Search condition to use for the SENT bus search. |
enum - Returns the current SENT bus search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION LOW specifies searching for slow channel packet. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION PAUSE, indicating these arch is set to find pause pulses.
Sets or queries the search condition for a SENT bus search.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | START | FAST | SLOW | PAUSE | ERRor | Search condition to use. |
enum - Returns the current SENT search condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION LOW specifies searching for slow channel packet. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:CONDITION PAUSE, indicating these arch is set to find pause pulses.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRTypeset / query
Sets or queries the error type to be used when searching on SENT data. Requires the SRAUTOSEN option and the SENT bus trigger condition to be set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | FRAMELENgth | CRC | Error type used for SENT search. |
Sets or queries the SENT error type used when searching on SENT data. Requires the SENT bus trigger condition to be set to ERRor and the SRAUTOSEN option.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | FRAMELENgth | CRC | Error type to use when searching on SENT data. |
enum - Returns the current SENT error type used for search.
Sets or queries the CRC error type used when searching on SENT data. The CRC search can be limited to the fast or slow channel.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FAST | SLOW | Selects whether CRC errors are searched for only in the fast channel or only in the slow channel. |
enum - Returns the current CRC search channel selection.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC SLOW sets the search to find SENT slow channel CRC errors. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC FAST, indicating that the SENT fast channel is being searched for CRC errors.
Sets or queries the CRC error type used when searching on SENT data. Requires the SRAUTOSEN option and the SENT bus trigger condition to be set to ERRor with ERRType set to CRC.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FAST | SLOW | Selects whether CRC errors are searched for only in the fast channel or only in the slow channel. |
enum - Indicates which CRC error channel is currently selected for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC SLOW sets the search to find SENT slow channel CRC errors. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:ERRTYPE:CRC FAST, indicating that the SENT fast channel is being searched for CRC errors.
Sets or queries the high binary fast channel 1 value used when searching on a SENT bus signal.
Sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.
Sets or queries the qualifier used when searching on SENT fast packet bus data for device channel 1. Requires option SRAUTOSEN and the SENT bus trigger condition to be FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for the SENT fast packet bus search on channel 1. |
enum - Returns the current qualifier setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN1A:QUALifier EQual SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN1A:QUALifier?
Sets or queries the qualifier used when searching on SENT fast packet bus data for device channel 1. Requires option SRAUTOSEN and the SENT bus trigger condition set to FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier used when searching on SENT fast packet bus data for device channel 1. |
enum - Returns the current qualifier used for searching on SENT fast packet bus data for device channel 1.
SEARCH:SEARCH<x>:TRIGGER:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGGER:A:BUS:SENT:FAST:CHAN1A:QUALifier?Sets or queries the qualifier used when searching on SENT fast packet bus data for device channel 1. Requires option SRAUTOSEN and the SENT bus trigger condition to be set to FAST.
enum - Returns the current qualifier for SENT fast packet bus search on channel 1.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN1A:HIVALue? might return
Sets or queries the binary fast channel 1 value used when searching on a SENT bus signal. The value is a QString binary pattern.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Fast Channel 1 binary value. |
string - The current Fast Channel 1 binary value as a binary pattern string.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN1A:VALUE "XXXXXXXXXXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN1A:VALUE?
Sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Fast Channel 2 binary value. |
This command sets or queries the high binary fast channel 2 value used when searching on a SENT bus signal.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | The number of the search. |
Sets or queries the qualifier used when searching on SENT fast packet bus data for device channel 2. Requires option SRAUTOSEN and the SENT bus trigger condition to be set to FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for the search condition. |
enum - Returns the current qualifier setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:QUALifier EQual SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Sets or queries the qualifier used when searching on SENT fast packet bus data for device channel 2. Requires option SRAUTOSEN and the SENT bus trigger condition to be FAST.
enum - Returns the current qualifier used for SENT fast packet bus search on device channel 2.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Sets or queries the binary fast channel 2 value used when searching on a SENT bus signal. Requires the SRAUTOSEN option and the trigger condition must be FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Fast Channel 2 binary value. |
string - Returns the Fast Channel 2 binary value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:VALUE "111111111111" SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:VALUE?
Sets or queries the binary fast channel 2 value used when searching on a SENT bus signal. Requires option SRAUTOSEN and the trigger condition to be FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Fast Channel 2 binary value. |
string - The fast channel 2 binary value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:VALUE "111111111111" SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:CHAN2B:VALUE?
Sets the Fast Channel 1 counter binary high value used for SENT fast packet search. The value is specified as a string of bits.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary counter high value to search for. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:COUNTER:HIVALUE "XXXXXXXX" SEARCH:SEARCH4:TRIGGER:A:BUS:SENT:FAST:COUNTER:HIVALUE? SEARCH:SEARCH4:TRIGGER:A:BUS:SENT:FAST:COUNTER:HIVALUE "11110000"
Sets or queries the fast channel 1 counter binary value used for SENT bus search. The command applies only when option SRAUTOSEN is installed, the SENT bus search condition is FAST, the number of channels is 1, and the nibble count is 6.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary value to search for. |
string - Returns the fast channel 1 counter binary value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:FAST:COUNTER:HIVALUE "XXXXXXXX" SEARCH:SEARCH4:TRIGGER:A:BUS:SENT:FAST:COUNTER:HIVALUE?
Sets or queries the binary fast message counter value used when searching on a SENT bus signal. Requires option SRAUTOSEN and the search condition set to FAST, with the number of channels set to 1 and nibble count set to 6.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | The number of the search. |
| value | string | - | Fast Channel 1 counter value. |
string - Returns the Fast Channel 1 counter value.
SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue <QString> SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
Sets or queries the binary fast message counter value used when searching on a SENT bus signal. Requires option SRAUTOSEN, the search condition FAST, one channel, and nibble count 6.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Fast Channel 1 counter value. |
string - Returns the fast Channel 1 counter value.
SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue <QString> SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue?
Sets or queries the binary fast message counter value used when searching on a SENT bus signal. The value is the Fast Channel 1 counter value for the specified search.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| QString | string | - | Fast Channel 1 counter value. |
string - Returns the binary fast message counter value.
SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue <QString> SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue?
Sets or queries the binary fast message counter value used when searching on a SENT bus signal. The value is the Fast Channel 1 counter value for the specified search.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | The number of the search. |
| value | string | - | The Fast Channel 1 counter value. |
string - Returns the Fast Channel 1 counter value.
SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue <QString> SEARCH:SEARCH5:TRIGGER:A:BUS:SENT:FAST:COUNTer:VALue?
Sets or queries the binary fast message inverted nibble value used when searching on a SENT bus signal.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The fast message inverted nibble binary value. |
TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE "XXXX" sets the FastChannel 1 secure inverted nibble value to "don't care." TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE? might return :TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE "1111" to search for a binary inverted nibble value of 1111.
Sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Fast message inverted nibble binary value. |
returns
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE "XXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE? might return :TRIGGER:A:BUS:B1:SENT:FAST:INVERTNIBBLE:VALUE "1111"
Sets or queries the binary status value used when searching on a SENT bus signal. Requires option SRAUTOSEN.
Sets or queries the binary status value used when searching on a SENT bus signal.
Sets or queries the qualifier used when searching on SENT pause pulses. The SENT bus trigger condition must be set to PAUSE.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use when searching on SENT pause pulses. |
Sets or queries the qualifier used when searching on SENT pause pulses. The SENT bus trigger condition must be set to PAUSE and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use when searching on SENT pause pulses. |
enum - Returns the current SENT pause qualifier.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:QUALifier?
Sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal. The trigger condition must be set to PAUSE and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Maximum number of pause clock ticks to be used when searching. |
integer - Returns the maximum number of pause clock ticks to be used when searching.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:HIVALUE 15 SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:HIVALUE?
Sets or queries the maximum number of pause clock ticks used when searching on a SENT bus signal. The trigger condition must be set to PAUSE, and the SRAUTOSEN option is required.
integer - Returns the maximum number of pause clock ticks used when searching.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:HIVALUE 15 SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:HIVALUE?
Sets or queries the minimum number of pause clock ticks to use when searching on a SENT bus signal. Requires option SRAUTOSEN and the SENT bus search condition must be set to PAUSE.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| value | integer | 1 | Minimum number of pause clock ticks to be used when searching. |
integer - Returns the minimum number of pause ticks to search for.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE 12 sets the minimum pause tick count on which to search to 12. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE 15 to indicate the minimum number of pause ticks to search for is 15.
Returns the minimum number of pause clock ticks used when searching on a SENT bus signal. The trigger condition must be set to PAUSE and option SRAUTOSEN is required.
integer - The minimum number of pause ticks to search for.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE 15 to indicate the minimum number of pause ticks SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:PAUSE:TICKS:VALUE 12 sets the minimum pause tick count on which to search to 12.
Sets or queries the high binary Slow channel data value used when searching on a SENT bus signal. Requires option SRAUTOSEN and the SENT bus search condition to be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| value | string | - | Sets the binary Slow channel data value. |
string - Returns the binary Slow channel data value used for searching.
SEARCH:SEARCH2:TRIGGER:A:BUS:SENT:SLOW:DATA:HIVALUE "XXXXXXXX" sets the Slow data high value on which to search to "don't care" for Search 2.
Sets or queries the high binary Slow channel data value used when searching on a SENT bus signal. Requires option SRAUTOSEN and the SENT bus search condition must be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary Slow channel data value to use when searching. |
string - Returns the high binary Slow channel data value used for the search.
SEARCH:SEARCH2:TRIGGER:A:BUS:SENT:SLOW:DATA:HIVALUE "XXXXXXXX" sets the Slow data high value on which to search to "don't care" for Search 2.
Sets or queries the qualifier used when searching on SENT slow packet bus data. The SENT bus trigger condition must be set to SLOW and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Selects the search qualifier for SENT slow data. |
enum - Returns the current slow data search qualifier.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:QUALIFIER LESSEQUAL SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:QUALIFIER?
Sets or queries the qualifier used when searching on SENT slow packet bus data. Requires option SRAUTOSEN and the SENT bus trigger condition must be set to SLOW.
enum - Returns the current search qualifier for SENT slow packet bus data.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:QUALIFIER LESSEQUAL sets the slow channel data qualifier to less than or equal. SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:QUALIFIER? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:QUALIFIER EQUAL to indicate that the slow channel data qualifier is set to equal.
Sets or queries the binary slow channel data value used when searching on a SENT bus signal. Requires option SRAUTOSEN, and the SENT bus trigger condition must be set to SLOW.
Sets or queries the binary slow channel data value used when searching on a SENT bus signal. The trigger condition must be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The slow channel data binary value. |
string - Returns the slow channel data binary value used for the search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:VALUE "XXXXXXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:DATA:VALUE?
Sets or queries the binary slow identifier value used when searching on a SENT bus signal. The trigger condition must be set to SLOW and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | The number of the search. |
| QString | string | - | The slow channel identifier binary value. |
string - Returns the binary slow identifier value used for the SENT bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SENT:SLOW:IDENTIFIER:VALUE "XXXX" sets the search identifier value to "don't care."
Sets or queries the binary slow identifier value used when searching on a SENT bus signal. The trigger condition must be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The slow channel identifier binary value. |
Specifies the binary physical address string used for SMBUS triggering when the trigger condition is address. The address value is searched within an SMBUS frame.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| address value | string | - | Binary physical address string to search on within the SMBUS frame. |
string - Returns the current specified address value as a binary string within an SMBUS frame.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue "1111111" specifies the address value as the field SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue "1111111", indicating the address value as "1111111"
Specifies the binary physical address string used for SMBUS triggering when the trigger condition is address. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| address value | string | - | Address value as the field within an SMBUS frame to search on. |
string - Returns the current specified address value within an SMBUS frame to search on.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue "1111111" specifies the address value as the field within a SMBUS frame to search on. SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue? might return SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ADDRess:VALue "1111111", indicating the address value as "1111111" current specified within a SMBUS frame to search on.
Specifies the binary command code string used for SMBUS triggering when the trigger condition is command code.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The command value as the field within an SMBUS frame to search on. |
string - Returns the current command value as the field within an SMBUS frame to search on.
Specifies the binary command code string used for SMBUS triggering when the trigger condition is command code. The search identifier number is SEARCH<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary command value as the field within an SMBUS frame to search on. |
string - Returns the current command value specified within an SMBUS frame to search on.
Sets or queries the trigger condition for an SMBus bus. The search number is specified by SEARCH<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| search number | integer | - | Search number specified by SEARCH<x>. |
| condition | enum | STARt | REPEATSTARt | ADDRess | HOSTADDR | DEVICEADDR | COMMand | DATa | UDIDDATa | ERRor | STOP | IDLe | Trigger condition for the SMBus bus. |
enum - Returns the currently specified trigger condition for the SMBus bus.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:CONDition STARt SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:CONDition?
Sets or queries the trigger condition for an SMBUS bus. The available conditions are start, repeat start, address, host address, device address, command, data, UDID data, error, stop, and idle.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | STARt | REPEATSTARt | ADDRess | HOSTADDR | DEVICEADDR | COMMand | DATa | UDIDDATa | ERRor | STOP | IDLe | Trigger condition to use for the SMBUS search. |
enum - Returns the current SMBUS trigger condition.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:CONDition STARt SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:CONDition?
Specifies the length of the data string in bytes to be used for an SMBus trigger when the trigger condition is DATA.
Sets or queries the SMBus trigger data size for the specified search. The valid range is 1 to 8, and the default data size is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Search number. |
| value | integer | 1 - 8 | Data size value. |
integer - Returns the current data size value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DATa:SIZe 4 SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DATa:SIZe?
Specifies the binary data string used for SMBus triggering when the trigger condition is DATA. The default value is XXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value as the field within an SMBUS frame to search on. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DATa:VALue "11001100" SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DATa:VALue?
Specifies the binary data string used for SMBus triggering when the trigger condition is DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string to search on within the SMBus frame. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DATa:VALue "11001100"
Sets or queries the SMBus device address value used as the search field. The default value is XXXXXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Device address value within a SMBUS frame to search on. |
string - Returns the device address value currently set for the SMBus search field.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DEVICEADDR:VALue "0011111" SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DEVICEADDR:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DEVICEADDR:VALue "11001100"
Queries the SMBus device address value used as the search field for the selected search identifier. The default value is XXXXXXX.
string - Returns the SMBus device address value currently selected as the field to search on.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DEVICEADDR:VALue? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:DEVICEADDR:VALue "11001100", indicating the device address value is "0011111".
Sets or queries the SMBus error type for a search. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | ACK | NACK | PEC | Error search type to use. |
enum - Returns the currently specified SMBus error search type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ERROr:TYPe ACK SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ERROr:TYPe?
Sets or queries the SMBus error search type for the specified search. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| type | enum | ANY | ACK | NACK | PEC | Error search type. |
enum - Returns the currently specified SMBus error search type.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ERROr:TYPe ACK SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:ERROr:TYPe?
Sets or queries the SMBUS field byte size when the trigger condition is UDID data. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| field byte size | enum | ONE | TWO | FOUR | Sets the field byte size to 8, 16, or 32 bits. |
enum - Returns the current SMBUS field byte size.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:FIELDBYTe TWO SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:FIELDBYTe?
Sets or queries the SMBUS field byte size when the trigger condition is UDID data. Requires option SR-SMBUS.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | - | - | Search number. |
| size | enum | ONE | TWO | FOUR | Field byte size to use: ONE sets 8 bits, TWO sets 16 bits, and FOUR sets 32 bits. |
enum - Returns the field byte size setting.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:FIELDBYTe TWO SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:FIELDBYTe?
Specifies the binary data string used for SMBUS triggering when the trigger condition is UDID data. It sets or queries the UDID data value for the selected search identifier.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| value | string | - | UDID data value as the field within an SMBUS frame to search on. |
string - Returns the UDID data value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:UDIDDATa:VALue "11001101"
Specifies the binary data string used for SMBUS triggering when the trigger condition is UDID data. The query form returns the currently set UDID data value.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string used as the UDID data value to search on within a SMBUS frame. |
string - Returns the current UDID data value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SMBUS:UDIDDATa:VALue "11001101"
:SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrceset / query
Sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | enum | B0 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | B8 | B9 | B10 | B11 | B12 | B13 | B14 | B15 | B16 | Bus source specified as a bus number from B0 to B16. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCE B1 SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCE? might return :SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCE B15,
Sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | enum | B0 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | B8 | B9 | B10 | B11 | B12 | B13 | B14 | B15 | B16 | Specifies the bus source as a bus number from B0 to B16. |
enum - Returns the bus source for the bus trigger search, indicated as a B<number> value.
SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCE B1 SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCE?
Sets or queries the SpaceWire field or condition to search on for a bus search. The command affects most of the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPACEWIRe commands.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | DATa | ERRors | CONTROLCODe | CONTROLCHAR | Search condition to use for the SpaceWire bus search. |
enum - Returns the current SpaceWire search condition.
Sets or queries the SpaceWire bus search condition to use when searching on a SpaceWire bus. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SYNC | DATa | ERRors | CONTROLCODe | CONTROLCHAR | Search condition to use. |
enum - Returns the current SpaceWire bus search condition.
Sets or queries the SpaceWire control character type used when searching on a SpaceWire bus signal. The available types are Flow Control Token, Escape, and End of Packet.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | FCT | ESC | ENDOFPACKet | Control character type to use for the search. |
enum - Returns the current SpaceWire control character type.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe FCT SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Sets or queries the control character type to use when searching on a SpaceWire bus signal.
enum - Returns the current control character type used for the SpaceWire search.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe FCT SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Sets the control code type to use when searching on a SpaceWire bus signal.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search number. |
| code type | enum | NULL | TIMECODe | Control code type to use for the search. |
Sets or queries the SpaceWire control code type used when searching on a SpaceWire bus signal. The control code type can be Null code or Time code.
enum - Returns the current SpaceWire control code type.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe NULL specifies Null as the field on which to search within an SpaceWire frame. SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe? might return SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIReCONTROLCODETYPe TIMECODe.
Sets or queries the length of the data string, in bytes, to use when searching on a SpaceWire bus signal. The search condition must be set to Data.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 10 | Number of contiguous data bytes to use when searching on the SpaceWire data field. |
integer (bytes) - Returns the number of contiguous data bytes used when searching on the SpaceWire data field.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe 4 SEARCH:SEARCH5:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
Sets or queries the length of the data string, in bytes, used when searching on a SpaceWire bus signal. The search condition must be set to Data.
integer (bytes) - Returns the number of contiguous data bytes used when searching on the SpaceWire data field.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe 4 specifies 4 as the number of contiguous data bytes to use when searching on the SpaceWire data field. SEARCH:SEARCH5:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe? might return SEARCH:SEARCH5:TRIGger:A:BUS:SPACEWIRe:DATa:SIZE 10, indicating that Search 5 is set to use 10 contiguous data bytes searching on the SpaceWire data field.
Sets or queries the binary data value used when searching on a SpaceWire bus signal. The search condition must be set to Data.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data value to search for on a SpaceWire bus signal. |
string - Returns the binary data value currently set for the search.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:DATa:VALue "101011" SEARCH:SEARCH5:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Sets or queries the binary data value used when searching on a SpaceWire bus signal. The search condition must be set to Data.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the binary data value to search for on a SpaceWire bus signal. |
string - Returns the binary data value set for the SpaceWire bus search.
SEARCH:SEARCH1:TRIGger:A:BUS:SPACEWIRe:DATa:VALue "101011" SEARCH:SEARCH5:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Sets or queries the error type to search for on the SpaceWire bus signal. Requires the SpaceWire search condition and the SR-SPACEWIRE option.
enum - Returns the current SpaceWire error search type.
Sets or queries the error type to search for on the SpaceWire bus signal. Requires the search condition to be set to Data.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EEP | ESC | PARity | Error type to search for. |
Sets or queries the binary data string used for SpaceWire search when the search condition is Time Code.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data value to be used when searching on a SpaceWire bus signal. |
string - The current binary data string used for SpaceWire search when the search condition is Time Code.
SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue "101011" sets the timecode value to binary SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue "101011".
Sets or queries the binary data string used for SpaceWire search when the search condition is Time Code.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data value to be used when searching on a SpaceWire bus signal. |
string - Returns the binary data string used for SpaceWire search.
SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue "101011" sets the timecode value to binary 101011. SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:B:SPACEWIRe:TIMECode:VALue "101011".
Sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DATA | SS | STARTofframe | Search condition for the SPI bus search. |
Sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
enum - Returns the current SPI search condition.
Sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA, and the search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | NR1 | Specifies the number of contiguous data bytes. |
SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:DATA:SIZE 1 SEARCH:SEARCH2:TRIGGER:A:BUS:SPI:DATA:SIZE? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:SPI:DATA:SIZE 4
Sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA.
integer - Returns the number of contiguous data bytes used for the specified SPI bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:DATA:SIZE 1 sets the length of the data string for SPI bus trigger search 1 to 1 byte. SEARCH:SEARCH2:TRIGGER:A:BUS:SPI:DATA:SIZE? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:SPI:DATA:SIZE 4, indicating that the length of the data string for SPI bus trigger search 2 is 4 bytes.
Sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x, and the search condition must be DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Binary data string used for the SPI bus search. |
Sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x, and the search condition must be DATA.
Sets or queries the trigger source for SPI bus search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source type | enum | MISo | MOSi | Trigger source for SPI bus search. |
enum - Returns the current trigger source for the specified SPI bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:SOURCETYpe MOSi SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:SOURCETYpe?
Sets or queries the trigger source for an SPI bus search. The search number is specified by x.
enum - Returns the current trigger source setting for the specified SPI bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:SOURCETYpe MOSi SEARCH:SEARCH1:TRIGGER:A:BUS:SPI:SOURCETYpe?
Sets or queries the search condition for an SPMI bus. Requires option SRPM.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SSC | RESet | SLEep | SHUTdown | WAKeup | MASTERREAd | MASTERWRIte | REGREAd | REGWRIte | DEVICEDESCMASTERREAd | DEVICEDESCSLAVEREAd | EXTREGREAd | EXTREGWRIte | LONGEXTREGREAd | LONGEXTREGWRIte | REG0WRIte | AUTHenticate | TRANSferbusownership | PARItyerror | Search condition for the SPMI bus. |
Sets or queries the search condition for an SPMI bus. Requires option SRPM.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SSC | RESet | SLEep | SHUTdown | WAKeup | MASTERREAd | MASTERWRIte | REGREAd | REGWRIte | DEVICEDESCMASTERREAd | DEVICEDESCSLAVEREAd | EXTREGREAd | EXTREGWRIte | LONGEXTREGREAd | LONGEXTREGWRIte | REG0WRIte | AUTHenticate | TRANSferbusownership | PARItyerror | Search condition for an SPMI bus. |
Sets or queries the length of the data string, in bytes, used when searching on an SPMI bus signal. Requires option SRPM and the search condition must be EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Sets or queries the length of the data string, in bytes, to be used when searching on an SPMI bus signal. Requires option SRPM, and the search condition must be EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
real (bytes) - Returns the data string length in bytes for the selected search; when the condition is REG0WRIte, the return value may be fractional because the data size is less than a byte.
SEARCH:SEARCH4:TRIGger:A:BUS:SPMI:CONDITION SLEEP SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:CONDITION? might return :SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:CONDITION MASTERREAD
Specifies the binary data string used for SPMI search conditions such as MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte. The value is a binary data string identifying the data value to search for.
| Name | Type | Values | Description |
|---|---|---|---|
| data string | string | - | Binary data string that identifies the data value for which to search. |
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:DATA:VALUE "XXXXXXXX" SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:DATA:VALUE?
Specifies the binary data string used for SPMI searches when the search condition is one of the listed read/write conditions. It requires the SRPM option.
string - Returns the binary data string used to identify the data value being searched for.
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:DATA:VALUE "XXXXXXXX" SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:DATA:VALUE?
Sets or queries the binary data string that identifies the SPMI master address used when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string that identifies the master address for which to search. |
string - Returns the binary data string that identifies the master address used for the search.
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:MASTERADDRESS:VALUE "XX" SEARCH:SEARCH3:TRIGger:A:BUS:SPMI:MASTERADDRESS:VALUE?
Sets or queries the binary data string that identifies the SPMI master address used when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | - | - | Search identifier number. |
| QString | string | - | Binary data string that identifies the master address for which to search. |
string - Binary data string that identifies the master address used in the search.
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:MASTERADDRESS:VALUE "XX" SEARCH:SEARCH3:TRIGger:A:BUS:SPMI:MASTERADDRESS:VALUE?
Sets or queries the binary data string that identifies the register address used in SPMI triggering. The trigger condition must be one of the listed SPMI read/write register conditions.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string that identifies the register address for which to search. |
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE "XXXXXXXX" SEARCH:SEARCH5:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE?
Sets or queries the binary data string that identifies the slave address used in SPMI when the search condition matches one of several SPMI events.
| Name | Type | Values | Description |
|---|---|---|---|
| x | string | - | Search identifier number. |
string - Returns the binary data string that identifies the slave address for the search.
SEARCH:SEARCH4:TRIGger:A:BUS:SPMI:NORESPONSE? might return SEARCH:SEARCH4:TRIGger:A:BUS:SPMI:NORESPONSE FALSE to indicate that the Search 4 is not looking for No Response frames.
Sets or queries the binary data string that identifies the register address used in SPMI triggering. It is used when the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string that identifies the register address for which to search. |
string - Returns the binary register address search string.
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE "XXXXXXXX" sets the binary register address to "don't care." SEARCH:SEARCH5:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE? might return SEARCH:SEARCH5:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE "XXXX1111" to indicate Search 5 is searching for binary register address is XXXX1111.
Sets or queries the binary data string that identifies the register address used in SPMI triggering. It applies when the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string that identifies the register address for which to search. |
string - Returns the binary data string that identifies the register address used in SPMI triggering.
SEARCH:SEARCH2:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE "XXXXXXXX" sets the binary register address to "don't care." SEARCH:SEARCH5:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE? might return SEARCH:SEARCH5:TRIGger:A:BUS:SPMI:REGISTERADDRESS:VALUE "XXXX1111" to indicate Search 5 is searching for binary register address is XXXX1111.
Sets or queries the binary data string that identifies the slave address used in SPMI for the listed search conditions.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| value | string | - | Binary data string that identifies the slave address for the search condition. |
Sets or queries the binary data string that identifies the slave address used in SPMI under the listed search conditions. The page slice shows only the setter syntax for this command; no query return value is documented here.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| value | string | - | Binary data string that identifies the slave address for the search. |
Sets or queries the command response of the respective command type for the SVID bus. Requires option SR-SVID.
| Name | Type | Values | Description |
|---|---|---|---|
| response | enum | GETReg | GETRegvendor | GETRegtestcfg | SETFast | SETSlow | SETDecay | SETPs | SETRegaddr | SETRegdata | REGAddrvendor | REGDatavendor | REGAddrtestconfg | REGDatatestconfg | TESTmode | SETWp | GETRegpktrecent | GETRegpktalert | GETRegpktbad | GETRegvrevent | Command response condition for the search. |
enum - Returns the current command response setting.
SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg| GETRegvendor| GETRegtestcfg| SETFast| SETSlow| SETDecay| SETPs| SETRegaddr| SETRegdata| REGAddrvendor| REGDatavendor| REGAddrtestconfg| REGDatatestconfg| TESTmode| SETWp| GETRegpktrecent| GETRegpktalert| GETRegpktbad| GETRegvrevent}
SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?Sets or queries the command response for the specified SVID bus command type. Requires option SR-SVID.
| Name | Type | Values | Description |
|---|---|---|---|
| response | enum | GETReg | GETRegvendor | GETRegtestcfg | SETFast | SETSlow | SETDecay | SETPs | SETRegaddr | SETRegdata | REGAddrvendor | REGDatavendor | REGAddrtestconfg | REGDatatestconfg | TESTmode | SETWp | GETRegpktrecent | GETRegpktalert | GETRegpktbad | GETRegvrevent | Selects the command response condition for the search. |
enum - Returns the current command response setting for the SVID bus command type.
Sets or queries the command type for SVID bus. GET is the default command type condition.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Search identifier number. |
| type | enum | GET | SET | OPTional | Command type to search for. |
enum - Returns the current SVID bus command type.
SEARCH:SEARCH3:TRIGger:A:BUS:SVID:COMMand:TYPe SET SEARCH:SEARCH1:TRIGger:A:BUS:SVID:COMMand:TYPe?
Sets or queries the command type for SVID bus. The default command type condition is GET.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| type | enum | GET | SET | OPTional | Command type condition to use. |
enum - Returns the current command type for the SVID bus command field.
SEARCH:SEARCH3:TRIGger:A:BUS:SVID:COMMand:TYPe SET SEARCH:SEARCH1:TRIGger:A:BUS:SVID:COMMand:TYPe?
Sets or queries the trigger condition for SVID bus.
Sets or queries the trigger condition for SVID bus.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
Sets or queries the error type for SVID bus search. Requires option SR-SVID.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | - | - | Search identifier number. |
| error type | enum | ANY | NACK | REJect | MIXed | PARity | Error type condition to search for. |
enum - Returns the currently specified SVID error type condition.
SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY| NACK| REJect| MIXed| PARity}
SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?Sets or queries the error type for SVID bus search. The available error types are ANY, NACK, REJect, MIXed, and PARity.
enum - Returns the currently specified error type for the search identifier.
SEARCH:SEARCH1:TRIGger:A:BUS:SVID:ERRor:TYPe? SEARCH:SEARCH1:TRIGger:A:BUS:SVID:ERRor:TYPe ANY
Sets or queries the payload type for SVID bus search. The payload type condition can be Master, Slave, or Either.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | MASTer | SLAVe | EITHer | Payload type condition for the SVID bus search. |
enum - Returns the currently specified payload type for the SVID bus search.
Sets or queries the payload type for SVID bus search. The payload type selects which SVID frame field is used for the search.
enum - Returns the currently specified SVID payload type.
SEARCH:SEARCH3:TRIGger:A:BUS:SVID:PAYLoad:TYPe SLAVe SEARCH:SEARCH1:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
Sets or queries the payload value to be used when search is on an SVID bus.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Payload value string. |
returns
Sets or queries the payload value to be used when search is on the SVID bus.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | SVID payload value to use for search. |
returns
Sets or queries the slave address used when search is on the SVID bus. The default address is XXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Search identifier number. |
| address | string | - | Data value in the specified valid format; valid characters are 0, 1, and X for binary, hexadecimal, and symbolic. |
string - Returns the slave address used when search is on the SVID bus.
SEARCH:SEARCH1:TRIGGER:A:BUS:SVID:SLAVE:ADDRESS "XXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:SVID:SLAVE:ADDRESS?
Sets or queries the slave address used when search is on the SVID bus. The default address is XXXX.
| Name | Type | Values | Description |
|---|---|---|---|
| address | string | - | Data value in the specified valid format; valid characters are 0, 1, and X for binary, and symbolic. |
string - Returns the slave address in the specified valid format.
SEARCH:SEARCH1:TRIGGER:A:BUS:SVID:SLAVE:ADDRESS "XXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:SVID:SLAVE:ADDRESS?
Sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
Sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search condition must be set to TOKEN, and this value is used with VALue to define the range for INrange and OUTrange qualifiers.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search identifier number. |
| value | string | - | High binary address value. |
string - Returns the high binary address value.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:HIVALUE "XXXX" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:HIVALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:HIVALUE "XXXX"
Sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value in the specified valid format. |
string - Returns the address value for the normal token for the specified USB bus trigger search, in the format set by the command.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE "1110000" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE "11"
Sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value in the specified valid format. |
string - Returns the USB bus search address value in the specified valid format.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE "1110000" sets the address value for the normal token SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ADDRESS:VALUE "11", indicating that the address value for normal token
Sets or queries the USB bus trigger search control symbol for the specified search number. Requires option SRUSB3.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | COM | EDB | END | EPF | SDP | SHP | SKP | SLC | SUB | Any | Control symbol to search for. |
enum - Returns the current USB bus trigger search control symbol.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHARacter EDB SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHARacter? might return SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHARacter EPF
Sets or queries the USB bus trigger search control symbol for search x. Requires option SRUSB3.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | COM | EDB | END | EPF | SDP | SHP | SKP | SLC | SUB | Any | Selects which USB control symbol to search for. |
enum - Returns the current USB control symbol setting for the selected search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHARacter EDB SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHARacter?
:SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADerset / query
Sets or queries the Sync header type for Custom pattern triggering on a USB. The search number is specified by x.
enum - Returns the current Sync header type for USB custom pattern triggering.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHEADer DATa SEARCH:SEARCH1:TRIGger:A:BUS:USB:CHEADer?
Sets or queries the Sync header type for Custom pattern trigger on a USB bus. The search number is specified by x.
Sets or queries the trigger condition for a USB bus on Compliance Pattern sequences. The search number is specified by x; packet view must be Off.
| Name | Type | Values | Description |
|---|---|---|---|
| pattern sequence | enum | CP1 | CP3 | CP4 | CP56 | CP78 | CP9 | CP10 | CP11 | CP12 | CP13 | CP14 | CP15 | CP16 | Compliance pattern sequence to use for the trigger condition. |
SEARCH:SEARCH1:TRIGger:A:BUS:USB:COMPliance CP0 sets the compliance pattern sequence to CP0.
Sets or queries the trigger condition for a USB bus on Compliance Pattern sequences. The search number is specified by x; Packet view must be Off.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CP1 | CP3 | CP4 | CP56 | CP78 | CP9 | CP10 | CP11 | CP12 | CP13 | CP14 | CP15 | CP16 | Compliance pattern sequence to use for the USB bus trigger condition. |
enum - Returns the current compliance pattern sequence for the selected search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:COMPliance CP0 sets the compliance pattern sequence to CP0.
Sets or queries the search condition for a USB bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | COMPATTern | CONTROLCH | CUSTom | DATAPacket | EOP | ERRor | HANDSHAKEPacket | OSET | PACKet | RESET | RESUME | SPECIALPacket | SUSPEND | SYNC | SYNCBits | SYNCHEADer | TOKENPacket | USB bus search condition. |
enum - Returns the current USB bus search condition.
Sets or queries the USB bus search condition for where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | COMPATTern | CONTROLCH | CUSTom | DATAPacket | EOP | ERRor | HANDSHAKEPacket | OSET | PACKet | RESET | RESUME | SPECIALPacket | SUSPEND | SYNC | SYNCBits | SYNCHEADer | TOKENPacket | Search condition to use for the USB bus search. |
:SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPeset / query
Specifies the USB3 CRC trigger type to be valid on CRC5, CRC16, or CRC32 for the selected search number. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | CRC5 | CRC16 | CRC32 | CRC error type to use for the USB trigger search. |
enum - Returns the current USB3 CRC trigger type for the selected search number.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CRCTYPe CRC5 SEARCH:SEARCH1:TRIGger:A:BUS:USB:CRCTYPe?
Specifies the USB3 CRC trigger type for a USB bus trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | CRC5 | CRC16 | CRC32 | CRC error type to use for the trigger search. |
enum - Returns the current USB3 CRC trigger type for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CRCTYPe CRC5 SEARCH:SEARCH1:TRIGger:A:BUS:USB:CRCTYPe?
Sets or queries the pattern of characters in the custom pattern for USB bus trigger search x. Requires option SRUSB3 and the Mark On condition must be set to CUSTom.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Pattern of characters in the custom pattern. |
Sets or queries the pattern of characters in the USB custom pattern. The search number is specified by x.
string - Returns the pattern of characters in the custom pattern.
Sets or queries the pattern of Hex descrambled data values in the custom pattern. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the data value in the specified valid format; for this command, the value must be a series of hex values. |
string - Returns the pattern of Hex descrambled data values in the custom pattern.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue "BC,FF,XX,11" sets the pattern of Hex descrambled data values for the custom pattern as BC, FF, XX, 11. SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue "BC,FF,XX,11", indicating the pattern of Hex descrambled data values for the custom pattern is set to BC, FF, XX, 11.
Sets or queries the pattern of Hex descrambled data values in the custom pattern. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the data value in the specified valid format. |
string - Returns the pattern of Hex descrambled data values for the custom pattern.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue "BC,FF,XX,11" sets the pattern of Hex descrambled data values for the custom pattern as BC, FF, XX, 11. SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue? might return SEARCH:SEARCH1:TRIGger:A:BUS:USB:CUSTom:HEXVALue "BC,FF,XX,11", indicating the pattern of Hex descrambled data values for the custom pattern is set to BC, FF, XX, 11.
Sets or queries the number of symbols in the USB custom pattern. The search number is specified by x.
Sets or queries the number of symbols in the custom pattern. The search number is specified by x.
Sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value in the specified valid format (binary, hexadecimal, or symbolic). |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "XXXXX111" sets the data value for USB bus trigger search 1 to "XXXXX111" in binary format. SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "11", indicating that the data value for USB bus trigger search 1 is set to "11" in hexadecimal format.
Sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Data value in the specified valid format (binary, hexadecimal, or symbolic). |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "XXXXX111" sets the data value for USB bus trigger search 1 to "XXXXX111" in binary format. SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:HIVALUE "11", indicating that the data value for USB bus trigger search 1 is set to "11" in hexadecimal format.
Sets the byte offset to look for a data pattern at, in bytes, when searching on a USB bus signal. The search number is specified by x and the search condition must be set to DATA.
Sets the byte offset used when searching for a data pattern on a USB bus signal. The search number is specified by x, and the search condition must be set to DATA.
Sets or queries the qualifier used when searching on a USB bus signal. The search condition must be set to IDANDDATA or DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier used for the USB bus search condition. |
enum - Returns the current USB bus search qualifier.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:DATa:QUALifier INRANGE sets the qualifier to INRANGE.
Sets or queries the qualifier used when searching on a USB bus signal. The search condition must be set to IDANDDATA OR DATA.
enum - Returns the current USB bus data search qualifier.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:DATa:QUALifier INRANGE sets the qualifier to INRANGE.
Sets or queries the length of the data string, in bytes, used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | bytes | Specifies the data size in bytes. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:SIZE 1 SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:SIZE?
Sets or queries the length of the USB bus search data string, in bytes, used to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Length of the data string in bytes. |
integer (bytes) - Returns the data string length in bytes.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:SIZE 1 SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:SIZE?
Sets or queries the USB bus search type. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | DATA0 | DATA1 | DATA2 | MDATA | USB bus search data packet type. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:TYPe ANY SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:TYPe?
Sets or queries the USB bus search type. The search number is specified by x.
enum - Returns the current USB bus search type.
Sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary or hexadecimal data value string for the USB bus search. |
string - Returns the binary data value used for the USB bus search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:VALUE "AB" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:VALUE?
Sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to DATA.
string - Returns the current USB bus search data value as a quoted QString in binary or hexadecimal format.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:VALUE "AB" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:DATA:VALUE?
Sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Specifies the data value in the specified valid format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ENDPoint:VALue "AB" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:ENDPoint:VALue?
Sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Endpoint binary value in the specified valid format. |
string - Returns the endpoint binary value. The manual shows the query may return the command followed by the value string in binary or hexadecimal format.
Specifies the USB3 8b10b encoding error trigger type for a search number. The type can be set to character or disparity.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | CHARacter | DISParity | 8b10b error trigger type. |
SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe CHARacter SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe DISParity
Sets or queries the USB3 8b10b encoding error trigger type for the specified search number. The type can be set to character or disparity.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CHARacter | DISParity | Specifies the 8b10b error trigger type. |
enum - Returns the current 8b10b error trigger type.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe CHARacter SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERR8B10B:TYPe DISParity, indicating that the 8b10b trigger type for USB bus trigger search 1 is set to disparity.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPEset / query
Sets or queries the error type for a USB bus search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | BITSTUFFing | CRC5 | CRC16 | CRCTYPes | ERR8B10B | PID | Specifies the USB bus search error type. |
Sets or queries the USB bus search error type used to determine where to place a mark. The search number is specified by x.
enum - Returns the current USB bus search error type.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERRTYPE BITSTUFFing SEARCH:SEARCH1:TRIGger:A:BUS:USB:ERRTYPE?
Sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ACK | ANY | NAK | NYET | STALL | Handshake type to use for the USB bus trigger search. |
enum - Returns the current handshake type for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:HANDSHAKETYPE NAK SEARCH:SEARCH2:TRIGGER:A:BUS:USB:HANDSHAKETYPE?
Sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ACK | ANY | NAK | NYET | STALL | Handshake type to use for the USB bus trigger search. |
enum - Returns the current handshake type.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:HANDSHAKETYPE NAK sets the handshake type for USB bus trigger search SEARCH:SEARCH2:TRIGGER:A:BUS:USB:HANDSHAKETYPE? might return :SEARCH:SEARCH2:TRIGGER:A:BUS:USB:HANDSHAKETYPE NYET, indicating that the handshake type for USB bus trigger search 2 is set to NYET.
Sets or queries the Sync header type to trigger on for the specified USB bus trigger search. The search number is specified by x.
Sets or queries the USB trigger search Sync header type to trigger on. The search number is specified by x.
Sets or queries whether the keypad is toggled to KCode or Data for the specified search number. Requires option SRUSB3 and the keypad must be launched from the Custom Pattern Editor for USB.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | KCODe | DATa | Selects whether the Symbol toggle is set to K-Code or Data. |
enum - Returns the current keypad toggle state as KCode or Data.
Sets or queries whether the keypad is toggled to KCode or Data for the specified search number. Requires option SRUSB3, and the keypad must be launched from Custom Pattern Editor for USB.
enum - Returns the current keypad toggle state.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:KEYPADTYPeKODe sets the Symbol toggle to K-Code and Character keypad is loaded. SEARCH:SEARCH1:TRIGger:A:BUS:USB:KEYPADTYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:USB:KEYPADTYPeDATa, indicating that the Symbol toggle is Data and hex keypad is loaded.
:SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANEset / query
Specifies the lane to search on for USB 3.2 Gen1x2 and Gen2x2. The search number is specified by x.
This command specifies the lane to search on for USB 3.2 Gen1x2 and Gen2x2. The search number is specified by x.
Specifies the USB trigger type to be valid on an ordered set condition for the selected search number x. Requires option SR-USB.
| Name | Type | Values | Description |
|---|---|---|---|
| ordered_set | enum | TSEQ | TS1 | TS2 | SDS | SKP | SYNC | DPHSTART | DPPSTART | DPPEND | DPPABORT | LCSTART | HPSTART | Ordered set used for the USB trigger condition. |
enum - Returns the currently selected ordered set for the USB trigger condition.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:ORDered:SET TSEQ SEARCH:SEARCH1:TRIGger:A:BUS:USB:ORDered:SET?
Specifies the USB trigger type to be valid on an ordered set condition. The search number is specified by x.
enum - Returns the current ordered-set trigger type for the specified USB search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:ORDered:SET?
Sets or queries the trigger condition for a USB bus on a specific packet. The search number is specified by x, and packet view must be On. Requires option SR-USB.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | LMP | TP | DP | ITP | ANY | Specifies the USB packet type to use for the trigger condition. |
enum - Returns the current USB packet type for the specified search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe LMP SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe TP, indicating that the packet type for USB bus trigger search 1 is set to TP.
Sets or queries the trigger condition for a USB bus on a specific packet type. The search number is specified by x, and Packet view must be On.
enum - Returns the current USB bus packet trigger type.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe LMP sets the packet type to LMP. SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe? might return :SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKETTYPe TP, indicating that the packet type for USB bus trigger search 1 is set to TP.
Sets or queries the trigger condition for an USB bus on a specific LMP packet. The search number is specified by x.
Sets or queries the trigger condition for a USB bus on a specific packet for LMP. The search number is specified by x.
Sets or queries the trigger condition for a USB bus on a specific packet for TP. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| packet type | enum | ACK | DEVNOTif | ERDY | NRDY | PING | PINGRSP | STATus | STALl | ANY | Specifies the transaction packet type. |
SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKet:TYPEOFTP ACK SEARCH:SEARCH1:TRIGger:A:BUS:USB:PACKet:TYPEOFTP?
Sets or queries the trigger condition for a USB bus on a specific packet for TP. The search number is specified by x.
enum - Returns the current USB bus trigger search packet type for TP.
Sets or queries the frame number string used for the Start of Frame of the specified USB bus trigger search. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic). |
string - Returns the frame number string for the Start of Frame for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SOFFRAMENUMBER "1001" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SOFFRAMENUMBER?
Sets or queries the frame number string for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x, and the search condition must be set to TOKEN.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Frame number string for the Start of Frame, in a valid binary, hexadecimal, or symbolic format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SOFFRAMENUMBER "1001" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SOFFRAMENUMBER?
Sets or queries the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | ERROr | PING | PREamble | RESERVed | SPLit | USB search type to use for the specified search. |
Sets the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | ERROr | PING | PREamble | RESERVed | SPLit | USB search type to use for the specified search. |
Sets or queries the Endpoint Type value for the specified USB bus trigger search on a split token field to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | enum | BULK | CONTROL | NOCARE | INTERRUPT | ISOchronous | Endpoint Type value to set. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:ET:VALUE BULK SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:ET:VALUE?
Sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | enum | BULK | CONTROL | NOCARE | INTERRUPT | ISOchronous | Endpoint Type value to set for the USB bus trigger search. |
enum - Returns the current Endpoint Type value for the specified USB bus trigger search.
Sets or queries the binary hub address value used when searching on a USB bus signal. The search number is specified by x, and the search condition must be set to Special with packet type SPLIT.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the hub address. |
string - Returns the hub address in the valid format.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE "1001" sets the hub address to "XXX1001". SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE "XX" (for binary format), indicating that the hub address for the USB bus trigger search on split token field is "XX".
Sets or queries the binary hub address value used when searching on a USB bus signal. The search number is specified by x, and the search condition must be set to Special with packet type SPLIT.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Hub address specified as a string. |
string - Returns the hub address value.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE "1001" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:HUB:VALUE?
Sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x, and the search condition must be set to Special with a packet type SPLIT.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Specifies the port address in the valid format. |
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:PORT:VALUE "1111" sets the port address for USB bus trigger search 1 to "XXX1111" for binary format. SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:PORT:VALUE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:PORT:VALUE "XX", indicating that the port address for USB hub trigger search 1 is set to "XX" in hexadecimal format.
Sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x, and the search condition must be set to Special with a packet type SPLIT.
| Name | Type | Values | Description |
|---|---|---|---|
| address | string | - | Binary port address in the valid format. |
string - Returns the binary port address value used for USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:PORT:VALUE "1111" SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:PORT:VALUE?
Sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number for the specified USB bus trigger search. |
| state | enum | CSPLIT | NOCARE | SSPLIT | Start/Complete value to set for the split token field search. |
enum - Returns the current Start/Complete value for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:SC:VALUE DONTCARE SEARCH:SEARCH2:TRIGGER:A:BUS:USB:SPLIT:SC:VALUE?
Sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| state | enum | CSPLIT | NOCARE | SSPLIT | Start/Complete value to set for the USB bus trigger search. |
enum - Returns the current Start/Complete value for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:SC:VALUE DONTCARE SEARCH:SEARCH2:TRIGGER:A:BUS:USB:SPLIT:SC:VALUE?
Sets or queries the Start/End value for the specified USB bus trigger on split token field search, used to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | enum | NOCARE | FULLSPEED | ISOALL | ISOEND | ISOMID | ISOSTART | LOWSPEED | Start/End bit value for the USB split-token field search. |
enum - Returns the current Start/End value for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:SPLIT:SE:VALUE DONTCARE SEARCH:SEARCH2:TRIGGER:A:BUS:USB:SPLIT:SE:VALUE?
Sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
enum - Returns the Start/End value setting for the specified USB bus trigger search.
SEARCH:SEARCH2:TRIGGER:A:BUS:USB:SPLIT:SE:VALUE?
Sets or queries the USB token type used to search a USB bus signal. The search number is specified by x.
enum - Returns the current USB token type for the specified search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE IN sets the token type for USB bus trigger search 1 to IN. SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE SOF, indicating that the token type for USB bus trigger search 1 is set to Start Of Frame.
Sets or queries the USB token type used to search a USB bus signal. The search number is specified by x.
enum - Returns the token type setting for the specified USB bus trigger search.
SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE IN sets the token type for USB bus trigger search 1 to IN. SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE? might return SEARCH:SEARCH1:TRIGGER:A:BUS:USB:TOKENTYPE SOF, indicating that the token type for USB bus trigger search 1 is set to Start Of Frame.
Sets or queries the control symbol used for USB 3.2 Gen2 trigger search. The control symbol can be one of several named symbols or Any.
| Name | Type | Values | Description |
|---|---|---|---|
| symbol | enum | COM | EDB | END | EPF | SDP | SHP | SKP | SLC | SUB | Any | Control symbol to use for the USB bus trigger search. |
enum - Returns the current control symbol used for USB bus trigger search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:USB3G2CHARacter EDB SEARCH:SEARCH1:TRIGger:A:BUS:USB:USB3G2CHARacter?
Sets or queries the USB 3.2 Gen 2 control symbol used for USB bus trigger search. The available symbols are COM, EDB, END, EPF, SDP, SHP, SKP, SLC, SUB, or Any.
enum - Returns the current USB 3.2 Gen 2 control symbol used for USB bus trigger search.
SEARCH:SEARCH1:TRIGger:A:BUS:USB:USB3G2CHARacter EDB SEARCH:SEARCH1:TRIGger:A:BUS:USB:USB3G2CHARacter?
Sets or queries the DDRRead search burst detection method. The DDR Read standard (DDR3 or LPDDR3) must be set before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | DQDQS | ChipSelect | LogicState | Burst detection method to use for DDRRead search. |
enum - Returns the current DDRRead search burst detection method.
Sets or queries the DDRRead search burst detection method. Set the DDR Read standard (DDR3 or LPDDR3) before using this command.
enum - Returns the current DDRRead search burst detection method.
Sets or queries the DDR read logic state burst latency value. Use after selecting the DDR Read standard and burst detection method as Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the logic state burst latency value. |
real - Returns the DDRREAD logic burst latency value.
SEARCH:SEARCH1:TRIGger:A:DDRREAD:BURSTLatency 500E-3 sets the DDRREAD burst latency value of search SEARCH:SEARCH3:TRIGger:A:DDRREAD:BURSTLatency? might return
Sets or queries the DDR read logic state burst latency value. Requires option 6-DBDDR3, a 6 Series MSO instrument, and that the DDR Read standard be set before use.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the logic state burst latency value. |
string - Returns the current DDRREAD burst latency setting as a SCPI assignment form.
SEARCH:SEARCH1:TRIGger:A:DDRREAD:BURSTLatency 500E-3 SEARCH:SEARCH3:TRIGger:A:DDRREAD:BURSTLatency?
Sets or queries the DDR Read burst length used when burst detection method is set to Logic State. SEARCH<x> specifies the search number.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | The DDRREAD logic state burst length value in bursts. |
integer - Returns the DDRREAD logic state burst length value in bursts.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:BURSTLENGTH 10 SEARCH:SEARCH1:TRIGger:A:DDRREAD:BURSTLENGTH?
Sets or queries the DDR read burst length for the specified search. This command is used when the burst detection method is set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| NR1 | integer | - | Sets the logic state burst length value. |
integer - Returns the current DDRREAD logic state burst length value in bursts for the specified search.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:BURSTLENGTH 10 SEARCH:SEARCH1:TRIGger:A:DDRREAD:BURSTLENGTH?
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActiveset / query
Sets or queries the DDR Read chip select active state. Use this command after setting the DDR Read standard and burst detection method as Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| state | enum | LOW | HIGH | Sets the DDR read chip select active state to low or high. |
Sets or queries the DDR Read chip select active state. Requires option 6-DBDDR3 and a 6 Series MSO instrument, and burst detection method must be set to Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | LOW | HIGH | Sets the DDR read chip select active state to low or high. |
enum - Returns the DDR read chip select active state.
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevelset / query
Sets or queries the DDR Read chip select level value. The command applies to a selected SEARCH<x> and requires DDR Read burst detection method set to Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | DDR read chip select level value. |
real - Returns the DDR read chip select level value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:CSLevel 2.8E-3 SEARCH:SEARCH5:TRIGger:A:DDRREAD:CSLevel?
Sets or queries the DDR Read chip select level value.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the search number. |
| value | real | - | Sets the DDR read chip select level value. |
real - Returns the DDRREAD chip select level value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:CSLevel 2.8E-3 SEARCH:SEARCH5:TRIGger:A:DDRREAD:CSLevel?
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSModeset / query
Sets or queries the DDR Read chip select mode. The command is only available on 6 Series MSO instruments with option 6-DBDDR3, after selecting the DDR Read standard and setting burst detection method to Chip Select.
Sets or queries the DDR Read chip select mode. Requires option 6-DBDDR3, a 6 Series MSO instrument, the DDR Read standard (DDR3 or LPDDR3), and burst detection method set to Chip Select.
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSourceset / query
Sets or queries the DDR Read search chip select source. The source can be a channel, digital waveform, math waveform, or reference waveform for the specified search.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR Read chip select source for the specified search number. |
enum - Returns the current DDR Read search chip select source as one of the listed source keywords.
Sets or queries the DDR Read search chip select source for the specified search number. The source can be selected from channel, digital waveform, math waveform, or reference waveform inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number specified by SEARCH<x>. |
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR Read chip select source for the specified search. |
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARateset / query
Sets or queries the DDR read search data rate for DDR3 and LPDDR3 standards of the specified search. Set the DDR Read standard before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number to configure. |
| datarate | enum | 333 | 800 | 1066 | 1200 | 1333 | 1466 | 1600 | 1866 | 2133 | DDR read search data rate. |
enum - Returns the current DDR read search data rate.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:DATARate 1333 SEARCH:SEARCH1:TRIGger:A:DDRREAD:DATARate?
Sets or queries the DDR read search data rate for the specified search. The command supports DDR3 and LPDDR3 standards, with the allowed data rates depending on the selected standard.
| Name | Type | Values | Description |
|---|---|---|---|
| rate | enum | 333 | 800 | 1066 | 1200 | 1333 | 1466 | 1600 | 1866 | 2133 | Selects the DDR read search data rate. |
enum - Returns the current DDR read search data rate.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:DATARate 1333 SEARCH:SEARCH1:TRIGger:A:DDRREAD:DATARate?
Sets or queries the DDR read data source when the search type is DDR READ.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR read data source for the specified search. |
enum - Returns the current DDR read data source.
SEARCH:SEARCH1:TRIGGER:A:DDRREAD:DATASource CH2 SEARCH:SEARCH1:TRIGGER:A:DDRREAD:DATASource?
Sets or queries the DDR read data source when the search type is DDR READ. Load a reference waveform before setting the source to a reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Specifies the DDR read data source for the specified search. |
enum - Returns the current DDR read data source.
SEARCH:SEARCH1:TRIGGER:A:DDRREAD:DATASource CH2 SEARCH:SEARCH1:TRIGGER:A:DDRREAD:DATASource? might return SEARCH:SEARCH1:TRIGGER:A:DDRREAD:DATASource REF1, indicating that the Reference waveform 1 DDR read trigger data is the source for search 1.
Sets or queries the DDR read hysteresis reference level value when the search type is DDR READ. The DDR read reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | - | DDR read hysteresis reference level value. |
real - Returns the DDR read hysteresis reference level value.
Sets or queries the DDR read hysteresis reference level value when the search type is DDR READ. The DDR read reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | - | DDR read hysteresis reference level value. |
real - Returns the current DDR read hysteresis reference level value.
Sets or queries the DDR read logic source 1 symbol. The symbol can be H (High), L (Low), or X (Don’t care).
| Name | Type | Values | Description |
|---|---|---|---|
| symbol | enum | H | L | X | Sets the logic source 1 symbol. |
enum - Returns the current DDR read logic source 1 symbol.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol X sets the DDRREAD logic source 1 symbol of SEARCH:SEARCH1:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol? might return
Sets or queries the DDR read logic source 1 symbol. The symbol can be set to High, Low, or Don't care.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| symbol | enum | H | L | X | Sets the logic source 1 symbol. |
enum - Returns the current logic source 1 symbol.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol X SEARCH:SEARCH1:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARginset / query
Sets or queries the DDR read margin reference level value when the search type is DDR READ. The reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| margin | real | 0 - 100 | DDR read search margin percent value. |
real (%) - Returns the DDR read search margin value in percent.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:MARgin 12 SEARCH:SEARCH1:TRIGger:A:DDRREAD:MARgin?
Sets or queries the DDR read margin reference level value when the search type is DDR READ. The reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0% - 100% | DDR read search margin percent value. |
real (%) - Returns the DDR read search margin percent value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:MARgin 12 SEARCH:SEARCH1:TRIGger:A:DDRREAD:MARgin?
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCASset / query
Sets or queries the DDR read chip maximum Column Access Strobe (CAS) value. Use only when the DDR Read standard is set to DDR3 or LPDDR3 and the burst detection method is Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Search number. |
real - Returns the DDR read chip maximum Column Access Strobe (CAS) value.
Sets or queries the DDR read chip maximum Column Access Strobe (CAS) value when the search type is DDR READ. Requires option 6-DBDDR3 and a 6 Series MSO instrument; the DDR Read standard must be set before using it, with burst detection method set to Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0 - 100 | DDR read chip maximum CAS value. |
real (%) - The DDR read chip maximum CAS value.
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCasset / query
Sets or queries the DDR read chip minimum Column Access Strobe (CAS) value. Requires option 6-DBDDR3, a 6 Series MSO instrument, and the DDR Read standard and burst detection method set to Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the DDR read chip select CAS minimum value. |
SEARCH:SEARCH1:TRIGger:A:DDRREAD:MINCas 3.8E-3 SEARCH:SEARCH7:TRIGger:A:DDRREAD:MINCas?
Sets or queries the DDR read chip minimum Column Access Strobe (CAS) value.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the DDR read chip select CAS minimum value. |
SEARCH:SEARCH1:TRIGger:A:DDRREAD:MINCas 3.8E-3 SEARCH:SEARCH7:TRIGger:A:DDRREAD:MINCas?
Sets or queries the DDR read postamble length for a search. The value selects the postamble length in tCK clock cycles.
| Name | Type | Values | Description |
|---|---|---|---|
| length | enum | 500E-3 | 500E-1.5 | 500E-1 | Selects the DDR read postamble length. |
enum - Returns the current DDR read postamble length setting as one of the documented values.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:POSTAMBLE:LENGth 500E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?
Sets or queries the DDR read postamble length for the selected Search entry when the search type is DDR READ.
enum - Returns the current DDR read postamble length setting for the selected Search entry.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:POSTAMBLE:Lenghth 500E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:POSTAMBLE:Lenghth?
Sets or queries the DDR read preamble type when the search type is DDR READ.
enum - Returns the current DDR read preamble type.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:PREAMBLE:TYPE STATIC SEARCH:SEARCH4:TRIGger:A:DDRREAD:PREAMBLE:TYPE?
Sets or queries the DDR read preamble type when the search type is DDR READ.
enum - Returns the DDR read preamble type.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:PREAMBLE:TYPE STATIC SEARCH:SEARCH4:TRIGger:A:DDRREAD:PREAMBLE:TYPE? SEARCH:SEARCH4:TRIGger:A:DDRREAD:PREAMBLE:TYPE DYNAMIC
Sets or queries the DDR read data high reference level value when the search type is DDR READ.
Sets or queries the DDR read data high reference level value when the search type is DDR READ.
Sets or queries the DDR read data low reference level value when the search type is DDR READ. Set the DDR read reference level mode to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR read search data low reference value. |
real - Returns the DDR read search data low reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:DATA:LOW 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:LOW? SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:LOW 50E-3
Sets or queries the DDR read data low reference level value when the search type is DDR READ. Set the DDR read reference level mode to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Sets the DDR read search data low reference value. |
real - Returns the DDR read search data low reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:DATA:LOW 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?
Sets or queries the DDR read reference level mode to auto or manual when the search type is DDR READ.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANUAL | Selects the DDR read reference level mode. |
enum - Returns the DDR read reference level mode.
SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode {AUTO|MANUAL}
SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?Sets or queries the DDR read reference level mode to auto or manual when the search type is DDR READ.
enum - Returns the DDR read reference level mode.
Sets or queries the DDR read data mid reference level value when the search type is DDR READ. The DDR read reference level mode must be Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Sets the DDR read search data mid reference value. |
real - Returns the DDR read search data mid reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:DATA:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:MID? might return SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:MID 50E-3
Sets or queries the DDR read data mid reference level value when the search type is DDR READ. Set the DDR read reference level mode to Manual before using this command.
real - Returns the current DDR read search data mid reference level value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:DATA:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:DATA:MID?
Sets or queries the DDR read reference level strobe high value when the search type is DDR READ. The DDR read reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR read search strobe high value. |
real - Returns the DDR read search strobe high value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?
Sets or queries the DDR read reference level strobe high value when the search type is DDR READ. The command requires option 6-DBDDR3, a 6 Series MSO instrument, and the DDR read reference level mode set to Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR read search strobe high value. |
real - Returns the DDR read search strobe high value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?
Sets or queries the DDR read reference level strobe low value when the search type is DDR READ. Requires option 6-DBDDR3 and a 6 Series MSO instrument.
Sets or queries the DDR read reference level strobe low value when the search type is DDR READ. It requires option 6-DBDDR3, a 6 Series MSO instrument, and manual DDR read reference level mode.
Sets or queries the DDR read search strobe mid reference value when the search type is DDR READ. The DDR read reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Sets the DDR read search strobe mid reference value. |
real - Returns the DDR read search strobe mid reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:STROBE:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?
Sets or queries the DDR read search strobe mid reference value when the search type is DDR READ. Set the DDR read reference level mode to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR read search strobe mid reference value. |
real - Returns the DDR read search strobe mid reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:REFLevel:STROBE:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?
:SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdardset / query
Sets or queries the DDR read search standard as DDR3 or LPDDR3.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | DDR3 | LPDDR3 | Selects the DDR read search standard. |
enum - Returns the current DDR read search standard.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:STANdard DDR3 SEARCH:SEARCH5:TRIGger:A:DDRREAD:STANdard?
Sets or queries the DDR read search standard as DDR3 or LPDDR3.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | DDR3 | LPDDR3 | DDR read search standard to use. |
enum - Returns the current DDR read search standard.
SEARCH:SEARCH2:TRIGger:A:DDRREAD:STANdard DDR3 SEARCH:SEARCH5:TRIGger:A:DDRREAD:STANdard?
Sets or queries the DDR read strobe source when the search type is DDR READ.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR read strobe trigger source for the specified search. |
Sets or queries the DDR read strobe source when the search type is DDR READ.
enum - Returns the current DDR read strobe source.
SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?
Sets or queries the DDR read logic state tolerance value. Requires option 6-DBDDR3, a 6 Series MSO instrument, DDR3 or LPDDR3 standard, and burst detection method set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| value | real | - | Logic state tolerance value. |
real - Returns the DDR read logic state tolerance value.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:TOLERance 400E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:TOLERance?
Sets or queries the DDR read logic state tolerance value. Requires option 6-DBDDR3, a 6 Series MSO instrument, DDR Read standard (DDR3 or LPDDR3) set, and burst detection method set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| tolerance | real | - | Sets the logic state tolerance value. |
real - Returns the DDR read logic state tolerance value.
SEARCH:SEARCH3:TRIGger:A:DDRREAD:TOLERance 400E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAD:TOLERance?
Sets or queries the DDR Read/Write search burst detection method.
SEARCH:SEARCH3:TRIGGER:A:DDRREAD:STROBESource MAT25 sets the Search 3 source waveform to Math 2 for the DDR read strobe search. SEARCH:SEARCH1:TRIGGER:A:DDRREAD:STROBESource? might return SEARCH:SEARCH1:TRIGGER:A:DDRREAD:STROBESource CH3, indicating that the Channel 3 waveform is the source for the DDR read strobe of Search 1.
Sets or queries the DDR Read/Write search burst detection method.
Sets or queries the DDR read/write logic state burst latency value. Requires option 6-DBDDR3, a 6 Series MSO, the DDR Read standard set to DDR3 or LPDDR3, and the burst detection method set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the logic state burst latency value. |
real - Returns the logic state burst latency value.
Sets or queries the DDR read/write logic state burst latency value. Requires option 6-DBDDR3, a 6 Series MSO, DDR Read standard set to DDR3 or LPDDR3, and burst detection method set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Logic state burst latency value. |
real - Returns the current logic state burst latency value.
SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:BURSTLatency?
Sets or queries the DDR read/write logic state burst length value for a search. The command requires option 6-DBDDR3, a 6 Series MSO instrument, DDR3 or LPDDR3 selected, and burst detection method set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| count | integer | - | Logic state burst length value in bursts. |
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:BURSTLENGTH 10 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:BURSTLENGTH?
Sets or queries the DDR read/write logic state burst length value for the specified search. The search number is provided by SEARCH<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| NR1 | integer | - | Sets the logic state burst length value. |
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:BURSTLENGTH 10 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:BURSTLENGTH?
Sets or queries the DDR Read/Write chip select active state. Use after setting the DDR Read standard and burst detection method to Chip Select.
Sets or queries the DDR Read/Write chip select active state. The command is used with DDR read standards DDR3 or LPDDR3 and burst detection method set to Chip Select.
Sets or queries the DDR Read/Write chip select level value.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the DDR read/write chip select level value. |
returns
Sets or queries the DDR Read/Write chip select level value.
real - Returns the DDR read/write chip select level value.
Sets or queries the DDR read/write chip select mode for a specified search. The mode must be set to Auto or Manual, and Manual mode requires reference levels to be set separately.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | Auto | Manual | DDR read/write chip select mode. |
enum - Returns the current DDR read/write chip select mode for the specified search.
SEARCH:SEARCH4:TRIGger:A:DDRREADWRITE:CSMode AUTO SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:CSMode?
Sets or queries the DDR read/write chip select mode. The mode can be set to Auto or Manual; in Manual mode, related commands are used to set the reference levels.
enum - Returns the current DDR read/write chip select mode.
SEARCH:SEARCH4:TRIGger:A:DDRREADWRITE:CSMode AUTO SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:CSMode?
Sets or queries the DDR Read/Write search chip select source. The slice states the command is used with DDR3 or LPDDR3 after setting burst detection method to Chip Select.
Sets or queries the DDR Read/Write search chip select source.
Sets or queries the DDR read/write data rate for the specified search. The DDR3 standard supports 800, 1066, 1333, 1600, 1866, and 2133; the LPDDR3 standard supports 333, 800, 1066, 1200, 1333, 1466, 1600, 1866, and 2133.
| Name | Type | Values | Description |
|---|---|---|---|
| data rate | enum | 333 | 800 | 1066 | 1200 | 1333 | 1466 | 1600 | 1866 | 2133 | Selects the DDR read/write data rate. |
enum - Returns the current DDR read/write data rate.
Sets or queries the DDR read/write data rate for the specified search. The applicable rates depend on the selected DDR3 or LPDDR3 standard.
| Name | Type | Values | Description |
|---|---|---|---|
| value | enum | 333 | 800 | 1066 | 1200 | 1333 | 1466 | 1600 | 1866 | 2133 | DDR read/write data rate to use for the specified search. |
enum - Returns the currently selected DDR read/write data rate for the specified search.
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:DATARate 1600 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:DATARate?
Sets or queries the DDR read/write data source when the search type is DDR READWRITE.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR read/write data source for the specified search. |
enum - Returns the current DDR read/write data source for the specified search.
Sets or queries the DDR read/write data source when the search type is DDR READWRITE. The source can be a channel, digital channel waveform, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR read/write data source for the specified search. |
enum - Returns the current DDR read/write data source.
Sets or queries the DDR read/write hysteresis reference level value when the search type is DDR READWRITE. The hysteresis percent value ranges from 0% to 50%.
| Name | Type | Values | Description |
|---|---|---|---|
| hysteresis | real | 0% - 50% | DDR read/write search hysteresis percent value. |
real (%) - Returns the DDR read/write search hysteresis value as a percent.
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:HysTeresis 10 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:HYSteresis?
Sets or queries the DDR read/write logic source 1 symbol for the selected search. The symbol can be High, Low, or Don’t care.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | - | - | Specifies the search number. |
| symbol | enum | H | L | X | Sets the logic source 1 symbol to High, Low, or Don’t care. |
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol X SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?
Sets or queries the DDR read/write margin reference level value when the search type is DDR READWRITE. The DDR read/write reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| margin | real | - | DDR read/write margin reference level value. |
real - Returns the DDR read/write margin reference level value.
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:MARgin 1.0 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:MARgin?
Sets or queries the DDR read/write chip maximum Column Access Strobe (CAS) value. Requires option 6-DBDDR3, a 6 Series MSO instrument, and the DDR Read standard to be set before use.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0% - 100% | Sets the DDR read/write chip maximum CAS value. |
real (%) - Returns the DDR read/write chip maximum CAS value.
SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:MAXCAS 3.8E-3 SEARCH:SEARCH5:TRIGger:A:DDRREADWRITE:MAXCAS?
Sets the DDR read chip select CAS minimum value for the specified search. The search number is given by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| search number | integer | - | Specifies the search number. |
| value | real | - | Sets the DDR read chip select CAS minimum value. |
SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:MINCas 3.8E-3 SEARCH:SEARCH5:TRIGger:A:DDRREADWRITE:MINCas? might return SEARCH:SEARCH5:TRIGger:A:DDRREADWRITE:MINCas 2.1E-3
Sets or queries the DDR read/write postamble length when the search type is DDR READWRITE. The setting applies to Search<x> and supports three fixed tCK lengths.
enum - Returns the current postamble length setting as one of the supported fixed values.
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth 500E-1.5 SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?
Sets or queries the DDR read/write preamble type when the search type is DDR READWRITE.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | STATIC | DYNAMIC | Selects the DDR Read/Write preamble type. |
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE STATIC SEARCH:SEARCH5:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?
Sets or queries the DDR read/write data high reference level value when the search type is DDR READWRITE. The DDR read/write reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Sets the DDR read/write search data high reference value. |
SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH <NR3> SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?
Sets or queries the DDR read/write data low reference level value when the search type is DDR READWRITE. The reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR read/write search data low reference value. |
real - Returns the DDR read/write search data low reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAWRITE:REFLevel:DATA:LOW?
Sets or queries the DDR read/write data mid reference level value when the search type is DDR READWRITE. Use only after setting the DDR read/write reference level mode to Manual.
Sets or queries the DDR read/write reference level mode for the selected search to auto or manual when the search type is DDR READWRITE.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANUAL | Sets the DDR read/write reference level mode. |
enum - Returns the current DDR read/write reference level mode.
SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:REFLEVELMode MANUAL SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:REFLEVELMode?
Sets or queries the DDR read/write reference level strobe high value when the search type is DDR READWRITE. The command requires option 6-DBDDR3, a 6 Series MSO instrument, and Manual reference level mode.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the DDR read search strobe high value. |
real - Returns the DDR read/write search strobe high value.
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?
Sets or queries the DDR read/write reference level strobe low value when the search type is DDR READWRITE. The command requires option 6-DBDDR3, a 6 Series MSO instrument, and Manual reference level mode.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | <NR3> sets the DDR read search strobe low value. |
real - Returns the DDR read/write search strobe low value.
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?
Sets or queries the DDR read/write reference level strobe mid value when the search type is DDR READWRITE. The command is used only with option 6-DBDDR3 on a 6 Series MSO instrument, and the DDR read/write reference level mode must be set to Manual before use.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Sets the DDR read/write search strobe mid reference value. |
real - Returns the DDR read/write search strobe mid reference value.
SEARCH:SEARCH2:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRREAWRITE:REFLevel:STROBE:MID?
Sets or queries the DDR read/write search standard as DDR3 or LPDDR3.
enum - Returns the current DDR read/write search standard.
Sets or queries the DDR read/write strobe source when the search type is DDR READWRITE. The source can be a channel, digital waveform, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR read/write strobe source for the specified search. |
enum - Returns the current DDR read/write strobe source.
SEARCH:SEARCH5:TRIGGER:A:DDRREADWRITE:STROBESource CH8 sets the Search 5 source waveform to Channel 8 for the DDR read/write strobe search.
Sets or queries the DDR read/write logic state tolerance value.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | 1 - 6 | Specifies the search number. |
| tolerance | real | NR3 | Sets the logic state tolerance value. |
real - Returns the DDR read/write logic state tolerance value.
SEARCH:SEARCH1:TRIGger:A:DDRREADWRITE:TOLerance 400E-3 SEARCH:SEARCH3:TRIGger:A:DDRREADWRITE:TOLerance?
Sets or queries the DDRWRITE search burst detection method.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | DQDQS | ChipSelect | LogicState | Burst detection method for DDRWRITE search. |
Sets or queries the DDR write logic state burst latency value. This command requires the DDR write burst detection method to be set to Logic State.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Sets the logic state burst latency value. |
real - Returns the current DDR write logic state burst latency value.
SEARCH:SEARCH1:TRIGger:A:DDRWRITE:BURSTLatency 500E-3 SEARCH:SEARCH3:TRIGger:A:DDRWRITE:BURSTLatency?
Sets or queries the DDR write logic state burst length value.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | NR1 | Logic state burst length value. |
integer - Returns the DDRWRITE logic state burst length value, in bursts.
SEARCH:SEARCH3:TRIGger:A:DDRWRITE:BURSTLENGTH 10 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:BURSTLENGTH?
Sets or queries the DDR write chip select active state. Set burst detection method as "Chip Select" before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | LOW | HIGH | Chip select active state. |
:SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevelset / query
Sets or queries the DDR Write chip select level value. The command applies to a specified search number and requires the DDR Write burst detection method to be set to "Chip Select".
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| level | real | - | DDR write chip select level value. |
real - Returns the DDR write chip select level value for the specified search.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:CSLevel 2.8E-3 SEARCH:SEARCH5:TRIGger:A:DDRWRITE:CSLevel?
:SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSModeset / query
Sets or queries the DDR Write search chip select mode. Requires option 6-DBDDR3, a 6 Series MSO instrument, DDR Read standard set to DDR3 or LPDDR3, and burst detection method set as Chip Select.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | Auto | Manual | Selects whether the DDR write chip select mode is automatic or manual. |
enum - Returns the current DDR write search chip select mode.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:CSMode MANUAL SEARCH:SEARCH3:TRIGger:A:DDRWRITE:CSMode?
Sets or queries the DDR Write search chip select source. Requires option 6-DBDDR3 and a 6 Series MSO instrument; set the DDR Read standard before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Chip select source for the DDR Write search. |
enum - Returns the current DDR Write search chip select source.
SEARCH:SEARCH3:TRIGger:A:DDRWRITE:CSSource?
Sets or queries the DDR write search data rate for the specified search. The command applies to DDR3 and LPDDR3 standards and requires the DDR write standard to be set first.
| Name | Type | Values | Description |
|---|---|---|---|
| search<x> | integer | - | Specifies the search number. |
| data rate | enum | 333 | 800 | 1066 | 1200 | 1333 | 1466 | 1600 | 1866 | 2133 | Sets the DDR write search data rate. |
enum - Returns the currently set DDR write search data rate.
SEARCH:SEARCH5:TRIGger:A:DDRWRITE:CSSource CH2 sets the search 5 chip select source waveform to CH2 for DDR write search. SEARCH:SEARCH1:TRIGger:A:DDRWRITE:CSSource? might return SEARCH:SEARCH1:TRIGger:A:DDRWRITE:CSSource CH2, indicating that the Channel 2 waveform is the source for the DDR write chip select source of search 1.
Sets or queries the DDR write data source when the search type is DDR Write. The source can be a channel, digital waveform, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | DDR write data source for the specified search. |
SEARCH:SEARCH1:TRIGGER:A:WRITE:DATASource CH2 SEARCH:SEARCH1:TRIGGER:A:DDRWRITE:DATASource?
Sets or queries the DDR write hysteresis reference level value when the search type is DDR WRITE.
Sets or queries the DDR write logic source 1 symbol. The symbol must be set to H, L, or X.
| Name | Type | Values | Description |
|---|---|---|---|
| symbol | enum | H | L | X | Selects the logic source 1 symbol: H (High), L (Low), or X (Don’t care). |
enum - Returns the current DDR write logic source 1 symbol.
SEARCH:SEARCH3:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol X SEARCH:SEARCH1:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?
:SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARginset / query
Sets or queries the DDR write margin reference level value when the search type is DDR WRITE.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | 0 - 100 | DDR write search margin percent value. |
real (%) - Returns the DDR write search margin percent value.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:MARgin 11 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:MARgin?
:SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCASset / query
Sets or queries the DDR write chip select maximum Column Access Strobe (CAS) value.
:SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCasset / query
Sets or queries the DDR write chip select minimum Column Access Strobe (CAS) value. Requires option 6-DBDDR3, a 6 Series MSO instrument, DDR Read standard set to DDR3 or LPDDR3, and burst detection method set to "Chip Select".
| Name | Type | Values | Description |
|---|---|---|---|
| SEARCH<x> | integer | - | Specifies the search number. |
| value | real | - | Sets the DDR write chip select CAS minimum value. |
SEARCH:SEARCH1:TRIGger:A:DDRWRITE:MINCas 3.8E-3 sets the DDR write chip select CAS minimum value to 3.8 milliseconds for search 1. SEARCH:SEARCH2:TRIGger:A:DDRWRITE:MINCas? might return SEARCH:SEARCH2:TRIGger:A:DDRWRITE:MINCas 3.8E-3, indicating that the DDR write chip select CAS minimum value is set to 3.8 milliseconds for search 2.
Sets or queries the DDR write postamble length when the search type is DDR WRITE.
| Name | Type | Values | Description |
|---|---|---|---|
| length | enum | 500E-3 | 500E-1.5 | 500E-1 | Postamble length setting in tCK. |
SEARCH:SEARCH6:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth 500E-3 SEARCH:SEARCH2:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?
Sets or queries the DDR write preamble type when the search type is DDR WRITE.
SEARCH:SEARCH1:TRIGger:A:DDRWRITE:PREAMBLE:TYPE STATIC sets the DDR write preamble type to Static for Search 1.
Sets or queries the DDR write data high reference level value when the search type is DDR WRITE. The DDR write reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR write search data high reference value. |
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH? might return SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH 50E-3
Sets or queries the DDR write data low reference level value when the search type is DDR WRITE. Use only after setting the DDR write reference level mode to Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Sets the DDR write search data low reference value. |
SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW <NR3> SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?
Sets or queries the DDR write reference level mode to auto or manual when the search type is DDR WRITE.
enum - Returns the DDR write reference level mode.
Sets or queries the DDR write data mid reference level value when the search type is DDR WRITE. The command requires option 6-DBDDR3, a 6 Series MSO instrument, and the DDR write reference level mode set to Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR write search data mid reference value. |
real - Returns the DDR write search data mid reference value.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:REFLevel:DATA:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?
Sets or queries the DDR write reference level strobe high value when the search type is DDR WRITE. The DDR write reference level mode must be set to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR write search strobe high value. |
real - Returns the DDR write search strobe high value.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH 3.8E-3 sets the DDR write search strobe high value.
Sets or queries the DDR write reference level strobe low value when the search type is DDR WRITE. Set the DDR write reference level mode to Manual before using this command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR write search strobe low reference value. |
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?
Sets the DDR write search strobe mid reference value. The manual example shows the command being used with an NR3 numeric value.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | DDR write search strobe mid reference value. |
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID 3.8E-3 SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID? SEARCH:SEARCH1:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID 50E-3
Sets or queries the DDR write search standard as DDR3 or LPDDR3.
enum - Returns the DDR write search standard.
SEARCH:SEARCH2:TRIGger:A:DDRWRITE:STANdard DDR3 SEARCH:SEARCH5:TRIGger:A:DDRWRITE:STANdard?
Sets or queries the DDR write strobe source when the search type is DDR Write.
Sets or queries the DDR write logic state tolerance value.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Sets the logic state tolerance value. |
SEARCH:SEARCH3:TRIGger:A:DDRWRITE:TOLERance 400E-3 sets the DDRWRITE logic state tolerance value of search 3 to .004.
:SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpeset / query
Sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISe | FALL | EITher | Selects a rising edge, falling edge, or either rising or falling edge. |
enum - Returns the current slope setting for the edge trigger search.
SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE RISE sets the slope for search 1 to rise. SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE? might return SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE RISE, indicating that the slope for the trigger for search 1 is rise.
:SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrceset / query
Sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Source waveform for the edge trigger search. |
enum - Returns the current source waveform for the edge trigger search.
SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE CH2 sets the source waveform for the A trigger to channel 2. SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE? might return SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE CH2, indicating that the channel 2 edge trigger is the source for search 1.
:SEARCH:SEARCH<x>:TRIGger:A:EDGE:THResholdset / query
Sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Source threshold level for an edge trigger search. |
string - Returns the current threshold setting for the specified search.
SEARCH:SEARCH1:TRIGger:A:EDGE:THReshold 50.0e-3 SEARCH:SEARCH1:TRIGger:A:EDGE:THReshold?
Sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Logic clock threshold. |
real - Returns the logic clock threshold value.
SEARCH:SEARCH1:TRIGger:A:LOGIc:CLOCk:THReshold 50.0e-3 SEARCH:SEARCH1:TRIGger:A:LOGIc:CLOCk:THReshold?
:SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatimeset / query
Specifies the Logic search delta time value used as part of the Logic search condition. The time value is used to determine whether the duration of a logic pattern meets the specified time constraints.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Logic search delta time value. |
:SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtionset / query
Sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| function | enum | AND | NANd | NOR | OR | Logic operator used by the search trigger. |
enum - Returns the current logic operator for the search trigger.
SEARCH:SEARCH1:TRIGGER:A:LOGIC:FUNCTION AND sets the trigger a logic function for search 1 to AND. SEARCH:SEARCH1:TRIGGER:A:LOGIC:FUNCTION? might return SEARCH:SEARCH1:TRIGGER:A:LOGIC:FUNCTION NOR, indicating that the logic function for search 1 is set to NOR.
Specifies or queries the channel to use as the clock source for logic trigger for the selected search number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | REF<x>_D<x> | Channel or reference waveform used as the logic trigger clock source. |
enum - Returns the clock source setting for the selected search number.
Sets or queries the voltage level used for logic trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Voltage level to use for logic trigger search. |
real - Returns the configured voltage level used for logic trigger search.
SEARCH:SEARCH1:TRIGger:A:LOGIc:LEVel:CH2 50.0e-3 sets the level to 50 mV. SEARCH:SEARCH1:TRIGger:A:LOGIc:LEVel:CH2? might return SEARCH:SEARCH1:TRIGGER:A:LOGIC:LEVEL:CH2 0.0E+0 indicating the level is set to 0.0 V.
Sets or queries the voltage level to use for logic trigger search for math input x. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The voltage level to use for logic trigger search. |
real (V) - Returns the voltage level set for logic trigger search.
SEARCH:SEARCH1:TRIGger:A:LOGIc:LEVel:MATH1 50.0e-3 SEARCH:SEARCH1:TRIGger:A:LOGIc:LEVel:MATH1?
Sets the voltage level to use for logic trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | V | The voltage level to use for logic trigger search. |
Sets or queries the conditions used for generating an A logic pattern for the selected search number and channel. The condition can be high, low, or high-or-low (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | H | L | X | Pattern condition for the selected channel. |
SEARCH:SEARCH1:TRIGger:A:LOGIc:LOGICPattern:CH2 H SEARCH:SEARCH1:TRIGger:A:LOGIc:LOGICPattern:CH2? SEARCH:SEARCH1:TRIGGER:A:LOGIC:LOGICPATTERN:CH2 X
Sets or queries the conditions used for generating an A logic pattern for the specified digital channel within a search sequence. The selected channel pattern can be set to high, low, or don't care.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | enum | H | L | X | Condition for the selected channel pattern. |
Sets or queries the conditions used for generating an A logic pattern with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | H | L | X | Specifies whether the pattern is high, low, or high-or-low. |
enum - Returns the current pattern state: H for high, L for low, or X for don’t care (high or low).
SEARCH:SEARCH1:TRIGger:A:LOGIc:LOGICPattern:MATH1 H sets the pattern to a high. SEARCH:SEARCH1:TRIGger:A:LOGIc:LOGICPattern:MATH1? might return SEARCH:SEARCH1:TRIGGER:A:LOGIC:LOGICPATTERN:MATH1 X indicating the pattern is a don’t care.
Sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | H | L | X | Specifies whether triggering occurs when the pattern is high, low, or high or low. |
enum - Returns the current pattern condition.
SEARCH:SEARCH1:TRIGger:A:LOGIc:LOGICPattern:REF1 H
:SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarityset / query
Sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | EITher | Specifies the clock edge polarity used for logic search. |
SEARCH:SEARCH1:TRIGger:A:LOGIc:POLarity NEGATIVE sets the polarity to negative. SEARCH:SEARCH1:TRIGger:A:LOGIc:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:LOGIC:POLARITY POSITIVE indicating the polarity is set to positive.
Specifies whether Logic search uses a clock source. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Whether to use the clock source for Logic search. |
SEARCH:SEARCH1:TRIGger:A:LOGIc:USEClockedge ON SEARCH:SEARCH1:TRIGger:A:LOGIc:USEClockedge?
:SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEnset / query
Sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | TRUe | FALSe | MOREthan | LESSThan | EQual | UNEQual | Condition for generating the logic search. |
enum - Returns the current condition for generating an A or B logic search with respect to the defined input pattern.
SEARCH:SEARCH1:TRIGger:A:LOGIc:WHEn FALSE specifies a search on an input value that is false. SEARCH:SEARCH1:TRIGger:A:LOGIc:WHEn? might return SEARCH:SEARCH1:TRIGGER:A:LOGIC:WHEN TRUE indicating a search on an input value that is true.
Specifies the upper limit, in seconds, used when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | s | Upper limit used when searching for a pulse. |
SEARCH:SEARCH1:TRIGger:A:PULSEWidth:HIGHLimit 2.5e-9 SEARCH:SEARCH1:TRIGger:A:PULSEWidth:HIGHLimit?
Specifies whether to use logic qualification for a pulse width search. The search number is specified by x.
Specifies the lower limit, in seconds, used when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | The lower limit to use, in seconds, when searching for a pulse. |
SEARCH:SEARCH1:TRIGger:A:PULSEWidth:LOWLimit 0.5e-9 sets the low limit to 0.5 ns. SEARCH:SEARCH1:TRIGger:A:PULSEWidth:LOWLimit? might return SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:LOWLIMIT 1.0000E-9 indicating the low limit is 2.0 ns.
This command specifies the polarity for a pulse width search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | Selects positive or negative polarity for the pulse width search. |
Sets and queries the source for the pulse width search input. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | REF<x> | REF<x>_D<x> | Search source waveform or channel. |
enum - Returns the currently selected pulse width search source.
SEARCH:SEARCH1:TRIGger:A:PULSEWidth:SOUrce CH1 sets the source to channel 1. SEARCH:SEARCH1:TRIGger:A:PULSEWidth:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:SOURCE CH2 indicating channel 2 is the source.
Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The source threshold level for a pulse width trigger search. |
SEARCH:SEARCH1:TRIGger:A:PULSEWidth:THReshold 1.0e-9 sets to 1.0 V. SEARCH:SEARCH1:TRIGger:A:PULSEWidth:THReshold? might return SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:THRESHOLD 0.0E+0 indicating the threshold is 0.0 V.
:SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEnset / query
Specifies the pulse-width search condition for search number x, selecting whether the pulse width is less than, greater than, equal to, unequal to, within, or outside a specified value or range. The value or limits are set with related pulse-width commands.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LESSthan | MOREthan | EQual | UNEQual | WIThin | OUTside | Selects the pulse-width relation used for the search. |
enum - Returns the current pulse-width search condition for search number x.
SEARCH:SEARCH1:TRIGger:A:PULSEWidth:WHEn Outside causes a search when a pulse is detected that is SEARCH:SEARCH1:TRIGger:A:PULSEWidth:WHEn? might return SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:WHEN WITHIN indicating that a search will occur when a pulse is detected that is within a set range.
Specifies whether to use logic qualification for a runt search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Selects whether logic qualification is used for a runt search. |
enum - Returns whether logic qualification is enabled for the runt search.
SEARCH:SEARCH1:TRIGger:A:RUNT:LOGICQUALification ON turns on logic qualification.
:SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarityset / query
Specifies the polarity for the runt search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | EITher | Polarity used for the runt search. |
SEARCH:SEARCH1:TRIGger:A:RUNT:POLarity NEGATIVE specifies using negative polarity for the runt search. SEARCH:SEARCH1:TRIGger:A:RUNT:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:RUNT:POLARITY POSITIVE indicating the polarity is set to positive.
:SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrceset / query
Sets and queries the source for the Runt search input. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | Search source to use for the Runt search input. |
enum - Returns the current Runt search source.
SEARCH:SEARCH1:TRIGger:A:RUNT:SOUrce CH1 sets the source to channel 1. SEARCH:SEARCH1:TRIGger:A:RUNT:SOUrce? might return CH2 indicating the source is set to channel 2.
Sets or queries the source threshold HIGH level for a runt trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Source threshold HIGH level for a runt trigger search. |
SEARCH:SEARCH1:TRIGger:A:RUNT:THReshold:HIGH 50.0E-3 sets the high threshold to 50 mV. SEARCH:SEARCH1:TRIGger:A:RUNT:THReshold:HIGH? might return SEARCH:SEARCH1:TRIGGER:A:RUNT:THRESHOLD:HIGH 0.0E+0 indicating the high threshold is 0.0 V.
Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The source threshold LOW level for a runt trigger search. |
SEARCH:SEARCH1:TRIGger:A:RUNT:ThReshold:LOW 50.0e-3 sets the threshold to 50 mV. SEARCH:SEARCH1:TRIGger:A:RUNT:ThReshold:LOW? might return SEARCH:SEARCH1:TRIGGER:A:RUNT:THRESHOLD:LOW 0.0E+0 indicating the threshold is 0.0 V.
:SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEnset / query
Sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | OCCURS | LESSthan | MOREthan | EQual | NOTEQual | Condition used for the runt trigger search. |
SEARCH:SEARCH1:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual|NOTEQual}
SEARCH:SEARCH1:TRIGger:A:RUNT:WHEn?:SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthset / query
Sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Minimum width in seconds. |
real (s) - Returns the current runt trigger minimum width setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:RUNT:WIDTH 400E–12 SEARCH:SEARCH1:TRIGGER:A:RUNT:WIDTH?
Sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FALL | RISe | Selects the clock edge polarity. |
enum - Returns the current clock slope setting for the setup/hold trigger search.
Sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Clock source for the specified setup/hold trigger search. |
enum - Returns the current clock source setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:SETHOLD:CLOCK:SOURCE MATH1 SEARCH:SEARCH1:TRIGGER:A:SETHOLD:CLOCK:SOURCE?
Sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | The clock threshold setting for a setup/hold trigger search. |
:SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTimeset / query
Sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| hold time | real | s | Hold time setting in seconds. Positive values occur after the clock edge; negative values occur before the clock edge. |
real (s) - Returns the hold time setting in seconds.
SEARCH:SEARCH1:TRIGGER:A:SETHOLD:HOLDTIME 400E-12 SEARCH:SEARCH1:TRIGGER:A:SETHOLD:HOLDTIME? might return SEARCH:SEARCH1:TRIGGER:A:SETHOLD:HOLDTIME 500.0000E–12
Sets or queries the voltage level used for setup and hold trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | The voltage level to use for setup and hold trigger search. |
real (V) - Returns the voltage level used for setup and hold trigger search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:CH1 50.0e-3 SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:CH1?
Sets or queries the voltage level used for setup and hold trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | Voltage level to use for setup and hold trigger search. |
real (V) - Returns the current voltage level used for setup and hold trigger search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:MATH1 50.0e-3 SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:MATH1?
Sets or queries the voltage level to use for setup and hold trigger search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | V | Voltage level to use for setup and hold trigger search. |
real (V) - Returns the voltage level used for setup and hold trigger search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:REF1 50.0e-3 sets the level to 50.0 mV. SEARCH:SEARCH1:TRIGger:A:SETHold:LEVel:REF1? might return SEARCH:SEARCH1:TRIGGER:A:SETHOLD:LEVEL:REF1 0.0E+0 indicating the level is 0.0 V.
Sets or queries the conditions used for generating an A logic pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | INCLude | DONTInclude | Includes or does not include the specified channel SETHOLD inputs in the specified search. |
Sets or queries whether the specified digital channel SETHOLD inputs are included in the selected search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | INCLude | DONTInclude | Selects whether the specified digital channel SETHOLD inputs are included in the search. |
enum - Returns whether the specified digital channel SETHOLD inputs are included in the search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LOGICPattern:CH1_D0 INCLUDE specifies including the specified digital channel SETHOLD inputs in the specified search. SEARCH:SEARCH1:TRIGger:A:SETHold:LOGICPattern:CH1_D0? might return SEARCH:SEARCH1:TRIGGER:A:SETHOLD:LOGICPATTERN:CH1_D0 DONTINCLUDE indicating the specified digital channel SETHOLD inputs will not be included in the specified search.
Sets or queries whether the specified math SETHOLD inputs are included in the specified search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | INCLude | DONTInclude | Selects whether the specified math SETHOLD inputs are included in the search. |
enum - Returns whether the specified math SETHOLD inputs are included in the search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LOGICPattern:MATH1 INCLUDE SEARCH:SEARCH1:TRIGGER:A:SETHOLD:LOGICPATTERN:MATH1? DONTINCLUDE
Sets and returns the conditions used for generating an A logic pattern with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | INCLude | DONTInclude | Specifies whether the reference SETHOLD inputs are included in the specified search. |
enum - Returns whether the specified reference SETHOLD inputs are included in the search.
SEARCH:SEARCH1:TRIGger:A:SETHold:LOGICPattern:REF1 INCLUDE specifies including the specified reference SETHOLD inputs in the specified search. SEARCH:SEARCH1:TRIGGER:A:SETHOLD:LOGICPATTERN:REF1? might return SEARCH:SEARCH1:TRIGGER:A:SETHOLD:LOGICPATTERN:REF1 DONTINCLUDE indicating the specified reference SETHOLD inputs will not be included in the specified search.
:SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTimeset / query
Sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Specifies the setup time for setup and hold violation triggering. |
real - Returns the setup time setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:SETHOLD:SETTIME 2E–9 SEARCH:SEARCH1:TRIGGER:A:SETHOLD:SETTIME?
:SEARCH:SEARCH<x>:TRIGger:A:STATEset / query
Sets or queries the enabled state of the search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Search number to control. |
| state | enum | NR1 | OFF | ON | Enables or disables the search. |
enum - Indicates whether the specified search is enabled or disabled.
SEARCH:SEARCH1:TRIGger:A:STATE OFF disables the search. SEARCH:SEARCH1:TRIGger:A:STATE? might return SEARCH:SEARCH1:TRIGGER:A:STATE 1 indicating search 1 is enabled.
Sets or queries the enabled state of the search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | enum | 1 | OFF | ON | Enables the search when set to 1 or ON; OFF disables the search. |
enum - Returns the enabled state of the search as 1 when enabled.
SEARCH:SEARCH1:TRIGger:A:STATE OFF disables the search. SEARCH:SEARCH1:TRIGger:A:STATE? might return SEARCH:SEARCH1:TRIGGER:A:STATE 1 indicating search 1 is enabled.
:SEARCH:SEARCH<x>:TRIGger:A:STOPAcqset / query
Sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Enables or disables stopping on a search hit. |
enum - Returns the stop-acquisition state for the specified search number.
SEARCH:SEARCH1:TRIGger:A:STOPAcq ON enables stopping when a search hit is found. SEARCH:SEARCH3:TRIGger:A:STOPAcq? might return :SEARCH:SEARCH3:TRIGGER:A:STOPACQ 1 indicating acquisitions are stopped when a search hit is found on search number 3.
Sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | The number of the search on which to enable or disable the stop acquisition function. |
| state | enum | NR1 | OFF | ON | Enables or disables stopping when a search hit is found. |
SEARCH:SEARCH1:TRIGger:A:STOPAcq ON enables stopping when a search hit is found. SEARCH:SEARCH3:TRIGger:A:STOPAcq? might return :SEARCH:SEARCH3:TRIGGER:A:STOPACQ 1 indicating acquisitions are stopped when a search hit is found on search number 3.
Sets or queries whether logic qualification is used for a timeout search. ON enables logic qualification; OFF disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Specifies whether logic qualification is used. |
enum - Returns whether logic qualification is on or off.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:LOGICQUALification ON specifies to use logic qualification. SEARCH:SEARCH1:TRIGger:A:TIMEOut:LOGICQUALification? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:LOGICQUALIFICATION OFF indicating logic qualification is off.
Sets or queries whether logic qualification is used for a timeout search. ON enables logic qualification; OFF disables it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Specifies whether to use logic qualification. |
SEARCH:SEARCH1:TRIGger:A:TIMEOut:LOGICQUALification ON SEARCH:SEARCH1:TRIGger:A:TIMEOut:LOGICQUALification?
:SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarityset / query
Sets or queries the polarity to be used for a Timeout search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | STAYSHigh | STAYSLow | EITher | Specifies whether the Timeout search polarity stays HIGH, stays LOW, or either. |
enum - Returns the current Timeout search polarity.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:POLarity STAYSLOW specifies the polarity stays LOW. SEARCH:SEARCH1:TRIGger:A:TIMEOut:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:POLARITY STAYSHIGH indicating the polarity stays HIGH.
Sets or queries the polarity used for a Timeout search. The search number is specified by x.
enum - Returns the current Timeout search polarity.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:POLarity STAYSLOW specifies the polarity stays LOW. SEARCH:SEARCH1:TRIGger:A:TIMEOut:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:POLARITY STAYSHIGH indicating the polarity stays HIGH.
:SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrceset / query
Sets or queries the source waveform for a timeout trigger search mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | MATH<x> | REF<x> | REF<x>_D<x> | Source waveform for the specified search. |
enum - Returns the selected source waveform for the specified search.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:SOUrce CH1 sets channel 1 as the source. SEARCH:SEARCH1:TRIGger:A:TIMEOut:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:SOURCE CH1 indicating channel 1 is the source.
Queries the source waveform used for the specified timeout trigger search. The search number is specified by x.
enum - Returns the source waveform identifier for the timeout trigger search, such as the specified channel or waveform source.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:SOUrce CH1 SEARCH:SEARCH1:TRIGger:A:TIMEOut:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:SOURCE CH1 indicating channel 1 is the source.
Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| threshold | real | - | Source threshold level for a timeout trigger search. |
real - Returns the source threshold level for the specified timeout trigger search.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:THReshold 50.0e-3 SEARCH:SEARCH1:TRIGger:A:TIMEOut:THReshold? might return SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:THRESHOLD 0.0E+0
Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Source threshold level for a timeout trigger search. |
real (V) - Returns the source threshold level for the specified timeout trigger search.
SEARCH:SEARCH1:TRIGger:A:TIMEOut:THReshold 50.0e-3 SEARCH:SEARCH1:TRIGger:A:TIMEOut:THReshold?
:SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMeset / query
Sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | The time in seconds. |
Sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | The time setting in seconds. |
real (s) - Returns the timeout trigger time setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:TIME 400E-9 SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:TIME?
Sets or queries the transition time setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | Transition time in seconds. |
real (s) - Returns the transition time setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:TIME 400E-9 SEARCH:SEARCH1:TRIGGER:A:TRANSITION:DELTATIME? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:DELTATIME 500.0000E-12
Sets or queries the transition time setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | s | Transition time in seconds. |
real (s) - Returns the transition time setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:TIME 400E-9 SEARCH:SEARCH1:TRIGGER:A:TRANSITION:DELTATIME?
Specifies whether to use logic qualification for a transition search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns logic qualification on or off for the transition search. |
enum - Returns whether logic qualification is enabled for the transition search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:LOGICQUALification ON SEARCH:SEARCH1:TRIGGER:A:TRANSITION:LOGICQUALIFICATION OFF
Specifies whether to use logic qualification for a transition search. The search number is specified by x.
enum - Returns the logic qualification setting for the specified transition search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:LOGICQUALification ON SEARCH:SEARCH1:TRIGger:A:TRANsition:LOGICQUALification? SEARCH:SEARCH1:TRIGGER:A:TRANSITION:LOGICQUALIFICATION OFF
Sets or queries the polarity used for a transition search mark. Positive, negative, or either polarity can be selected.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | EITher | Selects the transition polarity to search for. |
enum - Returns the current transition search polarity.
SEARCH:SEARCH1:TRIGger:A:TRANsition:POLarity NEGATIVE places a mark on a transition of negative polarity. SEARCH:SEARCH1:TRIGger:A:TRANsition:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:POLARITY POSITIVE indicating the polarity is positive.
Sets or queries the polarity for a transition trigger search. Positive, negative, or either polarity can be selected.
enum - Returns the polarity setting for the transition trigger search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:POLarity NEGATIVE places a mark on a transition of negative polarity. SEARCH:SEARCH1:TRIGger:A:TRANsition:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:POLARITY POSITIVE indicating the polarity is positive.
Sets and queries the source for the transition search input. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the transition search source. |
enum - Returns the currently selected transition search source.
SEARCH:SEARCH1:TRIGger:A:TRANsition:SOUrce CH1 SEARCH:SEARCH1:TRIGger:A:TRANsition:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:SOURCE CH2
Sets and queries the source for the transition search input. The search number is specified by x.
enum - Returns the transition search source.
SEARCH:SEARCH1:TRIGger:A:TRANsition:SOUrce CH1 sets the source to channel 1. SEARCH:SEARCH1:TRIGger:A:TRANsition:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:SOURCE CH2 indicating channel 2 is the source.
Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | The source threshold HIGH level for the transition trigger search. |
Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number specified in the command path. |
real (V) - Returns the source threshold HIGH level for the specified transition trigger search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:HIGH 50.0e-3 sets the high threshold to 50.0 mV. SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:HIGH? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:THRESHOLD:HIGH 0.0E+0 indicating the high threshold is 0.0 V.
Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Source threshold LOW level for the transition trigger search. |
real (V) - Returns the source threshold LOW level setting for the specified transition trigger search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:LOW -50.0e-3 sets the LOW threshold to -50.0 mV. SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:LOW? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:THRESHOLD:LOW 0.0E+0 indicating the LOW threshold is 0.0 V.
Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number. |
| level | real | V | Source threshold LOW level for the transition trigger search. |
real (V) - Returns the LOW threshold level for the specified search.
SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:LOW -50.0e-3 SEARCH:SEARCH1:TRIGger:A:TRANsition:THReshold:LOW?
:SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEnset / query
Sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FASTERthan | SLOWERthan | EQual | UNEQual | Condition used for the transition trigger search. |
enum - Returns the transition trigger condition setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHEN SLOWERTHAN SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHEN? might return SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHEN FASTERTHAN, indicating that the transition trigger condition setting for search 1 is set to FASTERTHAN.
Sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
enum - Returns the transition trigger condition setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHEN SLOWERTHAN SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHEN?
:SEARCH:SEARCH<x>:TRIGger:A:TYPeset / query
Sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | EDGE | RUNT | TRANsition | PULSEWidth | TIMEOut | LOGIc | SETHold | WINdow | Bus | DDRRead | DDRREADWrite | DDRWrite | Trigger type for the search. |
enum - Returns the current trigger type setting for the selected search.
SEARCH:SEARCH1:TRIGGER:A:TYPE RUNT SEARCH:SEARCH1:TRIGGER:A:TYPE? might return SEARCH:SEARCH1:TRIGGER:A:TYPE EDGE
Sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | EDGE | RUNT | TRANsition | PULSEWidth | TIMEOut | LOGIc | SETHold | WINdow | Bus | DDRRead | DDRREADWrite | DDRWrite | Trigger type for the search. |
enum - Returns the current trigger type setting for the selected search.
SEARCH:SEARCH1:TRIGGER:A:TYPE RUNT sets the trigger type setting for search 1 to RUNT. SEARCH:SEARCH1:TRIGGER:A:TYPE? might return SEARCH:SEARCH1:TRIGGER:A:TYPE EDGE, indicating that the trigger type setting for search 1 is set to EDGE.
:SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIngset / query
Sets or queries the window trigger threshold crossing for the selected trigger source. The selection is only effective when :TRIGger:A:WINdow:WHEn is INSIDEGreater or OUTSIDEGreater.
Sets or queries the window trigger threshold crossing for the selected trigger source. The crossing selection is only effective when :TRIGger:A:WINdow:WHEn is INSIDEGreater or OUTSIDEGreater.
Specifies or queries whether to use logic qualification for a window search. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns logic qualification for a window search on or off. |
enum - Returns whether logic qualification for a window search is enabled.
SEARCH:SEARCH1:TRIGger:A:WINdow:LOGICQUALification ON turns ON logic qualification for a window search.
Specifies or queries whether logic qualification is used for a window search. The search number is specified by x.
enum - Returns whether logic qualification for a window search is enabled or disabled.
SEARCH:SEARCH1:TRIGger:A:WINdow:LOGICQUALification ON turns ON logic qualification for a window search.
:SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarityset / query
Sets or queries the window trigger threshold crossing polarity of the selected trigger source. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | UPPer | LOWer | EITher | NONe | Specifies the window trigger threshold crossing polarity. |
enum - Returns the current window trigger threshold crossing polarity of the selected trigger source.
SEARCH:SEARCH1:TRIGger:A:WINdow:POLarity LOWER SEARCH:SEARCH1:TRIGger:A:WINdow:POLarity? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:POLARITY UPPER indicating the polarity is set to upper.
Sets or queries the window trigger threshold crossing polarity of the selected trigger source. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | UPPer | LOWer | EITher | NONe | Specifies the window trigger threshold crossing polarity. |
enum - Returns the current window trigger threshold crossing polarity.
SEARCH:SEARCH1:TRIGger:A:WINdow:POLarity LOWER SEARCH:SEARCH1:TRIGger:A:WINdow:POLarity?
:SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrceset / query
Sets or queries the source used for a window search trigger. The search number is specified by x.
string - Returns the current source, such as channel 3.
SEARCH:SEARCH1:TRIGger:A:WINdow:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:SOURCE CH3 indicating the source is channel 3.
Sets or queries the source of the A window search trigger for the specified search number.
string - Returns the source of the A window search trigger for the specified search number.
SEARCH:SEARCH1:TRIGger:A:WINdow:SOUrce? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:SOURCE CH3 indicating the source is channel 3.
Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | The source threshold HIGH level for a transition trigger search. |
real (V) - Returns the source threshold HIGH level for the transition trigger search.
SEARCH:SEARCH1:TRIGger:A:WINdow:THReshold:HIGH 50.0e-3 SEARCH:SEARCH1:TRIGger:A:WINdow:THReshold:HIGH?
Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | Source threshold HIGH level for a transition trigger search. |
real - Returns the source threshold HIGH level for a transition trigger search.
SEARCH:SEARCH1:TRIGger:A:WINdow:THReshold:HIGH 50.0e-3 SEARCH:SEARCH1:TRIGger:A:WINdow:THReshold:HIGH? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:THRESHOLD:HIGH 0.0E+0
Sets the lower threshold level used for a window trigger search. The search number is specified by x.
Queries the low threshold setting for a window trigger search. The search number is specified by x.
:SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEnset / query
Sets or queries the condition for an A window trigger search. The response indicates whether the search occurs on window entry, window exit, or when the signal stays inside or outside the window for the specified time.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ENTERSWindow | EXITSWindow | INSIDEGreater | OUTSIDEGreater | Window-search condition to use. |
enum - Returns the currently selected window-search condition.
SEARCH:SEARCH1:TRIGger:A:WINdow:WHEn EXITSWINDOW SEARCH:SEARCH1:TRIGger:A:WINdow:WHEn? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:WHEN ENTRASWINDOW indicating a window search when the signal enters the window.
Sets or queries when an A-window trigger search occurs. The command selects whether the search occurs when the signal enters or exits the window, or when it is inside/outside the window for the specified width time.
enum - Returns the current A-window trigger search condition.
SEARCH:SEARCH1:TRIGger:A:WINdow:WHEn EXITSWINDOW SEARCH:SEARCH1:TRIGger:A:WINdow:WHEn?
:SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDthset / query
Sets or queries the width setting for a window trigger search to determine where to place a mark. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | <NR3> | Minimum width in seconds. |
real (s) - Returns the current window trigger width setting for the selected search.
SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH 400E–12 sets the window trigger width setting for search 1 to 0.4 ns. SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH 500.0000E–12, indicating that the window trigger width setting for search 1 is set to 0.5 ns.
Sets or queries the width setting for a window trigger search to determine where to place a mark. The search number is specified by x.
real (s) - Returns the window trigger width setting for the specified search.
SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH 400E–12 SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH? might return SEARCH:SEARCH1:TRIGGER:A:WINDOW:WIDTH 500.0000E–12
:SEARCH:SELectedset / query
Sets the selected search, for example SEARCH1. The search number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| search | enum | SEARCH1 | Selected search number. |
Sets the audio trigger condition for bus B1 in SEARCH1.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | Audio trigger condition. |
Sets the high-value audio data pattern used by the B1 bus trigger under SEARCH1. The factory default is a quoted X-filled string.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High-value audio data pattern. |
Sets the audio data offset for SEARCH1 bus trigger B1. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | - | Audio data offset. |
Sets the audio data qualifier for the Search1 bus trigger on B1. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Audio data qualifier. |
Sets the audio data value used for the SEARCH1 bus trigger on bus B1. The factory default is a 24-character X pattern string.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Audio data value pattern. |
Sets the audio data word comparison mode for SEARCH1 trigger bus B1. Factory default is EITHER.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EITHER | Audio data word selection mode. |
Sets the CAN trigger condition for bus B1 in search 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | SOF | CAN trigger condition. |
Sets the CAN data direction condition for bus B1 trigger A search 1. Factory default is NOCARE.
Sets the CAN data offset for trigger search on bus B1. The factory default value is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | - | CAN data offset. |
Sets the CAN data qualifier used in the search trigger. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Qualifier for CAN data matching. |
Sets the default value for the CAN data size search parameter. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | Size of the CAN data field to search for. |
Sets the CAN data value used by search trigger A on bus B1. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | CAN data value pattern for the trigger. |
Sets the CAN FD BRS bit factory default value for search trigger bus B1. The appendix lists its default as X.
Sets the CAN FD stuff bit search condition for bus B1. Factory default is X.
Sets the CAN frame type used for bus trigger search. The factory default is DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| frametype | enum | DATA | CAN frame type. |
Sets the CAN identifier mode used for bus trigger/search conditions. The factory default is STANDARD.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | STANDARD | CAN identifier mode. |
Sets the CAN identifier value used by the search trigger. The factory default is "XXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Identifier value. |
Sets the FlexRay trigger condition for bus B1. The factory default is SOF.
Sets the factory-default high value for the FlexRay cycle count search condition. The slice shows this command’s default value as a quoted X-filled placeholder.
Sets the factory-default qualifier for the FlexRay cycle count trigger search condition. The factory default value is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Qualifier for the FlexRay cycle count trigger search condition. |
Sets the FlexRay cycle count value used for bus trigger/search settings. The factory default value is shown as "XXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay cycle count value. |
Factory default value for the FlexRay data high-value field in trigger bus B1. The slice lists this command in the factory defaults table with a default of "XXXXXXXX".
Sets the default offset for the FlexRay data search trigger on bus B1. The factory default value is -1.
Sets the default data qualifier for the FlexRay bus trigger search on bus B1. The factory default is EQUAL.
Sets the factory default size for the FlexRay data search trigger on bus B1. The manual slice lists a default value of 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | Size of the FlexRay data field to match. |
Sets the FlexRay data value used for bus trigger search on bus B1. The factory default value is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay data pattern value to search for. |
Sets the FlexRay EOF type used for the bus trigger. The factory default is STATIC.
Sets the FlexRay error type used for bus trigger search on bus B1. The factory default is CRCHEADER.
Sets the high value used for a FlexRay frame ID search condition. The factory default is "XXXXXXXXXXX".
Sets the factory-default qualifier for the FlexRay frame ID search condition. The manual slice lists its default value as EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Qualifier for the FlexRay frame ID condition. |
Sets the FlexRay frame ID value used for search trigger conditions. Factory default is "XXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay frame ID value used for the search trigger condition. |
Sets the FlexRay frame type used for bus trigger search on bus B1. The factory default is NORMAL.
Sets the FlexRay header CRC search value for bus trigger A on bus B1. The factory default is "XXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| crc | string | - | Header CRC value to match. |
Factory default value for the FlexRay header cycle count field.
Sets the FlexRay header frame ID used by the search trigger on bus B1. The factory default is "XXXXXXXXXXX".
Factory default for the FlexRay header independent bits field in Bus B1 trigger search settings.
Sets the FlexRay header payload length used by the bus trigger search block. The factory default value is shown as "XXXXXXX".
Sets or shows the default I2C address mode for bus B1 trigger search settings.
Sets the I2C address type used for bus trigger search settings. The factory default is USER.
Sets the I2C address value used by the SEARCH1 trigger on BUS:B1. The factory default value is shown as a quoted placeholder string.
Sets the I2C trigger condition for bus B1. The factory default is START.
Sets the default I2C data direction for SEARCH1 bus trigger A. The factory default is NOCARE.
Sets the I2C data size for bus trigger A on search1, bus B1. The factory default value is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | I2C data size. |
Sets the I2C trigger data value for bus B1. The factory default value is shown as a quoted byte/string placeholder.
Sets the LIN bus trigger condition for bus B1. The factory default is SYNCFIELD.
Sets the LIN data qualifier used for bus trigger search. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | LIN data qualifier to use. |
Sets the LIN trigger data size for bus B1 under SEARCH1 trigger A. Factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | LIN trigger data size. |
Factory default value for the LIN data value trigger setting.
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:ERRTYPEset / query
Factory default for the LIN error type setting.
Sets the LIN identifier value used for the bus trigger search on bus B1. The factory default is "XXXXXX".
Sets the high-value limit used for the MIL-STD-1553B command address trigger condition. The factory default is "UXEXXXX".
Sets the MIL-STD-1553B command address qualifier used in the search trigger bus B1 condition. The factory default is EQUAL.
Sets the MIL-STD-1553B command address value used by the search trigger. The factory default is "XXXXX".
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:VALUE
Sets the MIL-STD-1553B command count value for the trigger search condition.
Sets the default parity value for the MIL-STD-1553B command trigger search condition. The factory default is X.
Sets the MIL-STD-1553B command subaddress used for bus trigger search settings. The factory default is shown as a quoted numeric placeholder value.
| Name | Type | Values | Description |
|---|---|---|---|
| subaddress | integer | - | MIL-STD-1553B command subaddress value. |
Sets the factory default value for the MIL-STD-1553B command trigger transaction bit. The default shown is X.
Sets the MIL-STD-1553B search trigger condition for trigger A on bus B1. The factory default is SYNC.
Sets the MIL-STD-1553B data parity setting used for the bus trigger search. The factory default is X.
Sets the MIL-STD-1553B data value used for trigger/search setup. The factory default is a string of X characters.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | MIL-STD-1553B data value pattern. |
Sets the MIL-STD-1553B error type used for bus trigger A on search 1. The factory default is PARITY.
| Name | Type | Values | Description |
|---|---|---|---|
| errtype | enum | PARITY | Error type selection. |
Sets the high value used for MIL-STD-1553B address status triggering. The factory default is "XXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High value for the address status trigger. |
Sets the qualifier used for the MIL-STD-1553B status address trigger. Factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Selects the status address comparison qualifier. |
Sets the MIL-STD-1553B status address value used for bus trigger/search settings. The factory default value is shown as "XXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Status address value. |
Sets or reports the status bit selection used for MIL-STD-1553B bus trigger search settings. The factory default for this item is X.
Sets the factory default value for the MIL-STD-1553B BUSY status-bit trigger condition. The default shown is X.
Sets the MIL-STD-1553B status-bit trigger selection for bit DBCA. The factory default value is X.
Sets the default value for the MIL-STD-1553B status bit instrument trigger condition. Factory default is X.
Sets the factory-default value for the MIL-STD-1553B status bit ME trigger condition. The default shown for this item is X.
Sets the MIL-STD-1553B status bit condition used by the search trigger. Factory default is X.
Sets the default value for the MIL-STD-1553B status bit subfield used by search trigger A bus B1. The factory default for this item is X.
Sets the MIL-STD-1553B status bit trigger condition for search 1, trigger A, bus B1. The factory default value for the TF bit is X.
Sets the MIL-STD-1553B status parity search condition used by the trigger search sequence. The factory default is X.
Sets the factory-default value for the MIL-STD-1553B search time less-limit. The factory default shown is 4.0000E-6.
Sets the MIL-STD-1553B trigger time more-limit value for search trigger A, Bus B1. Factory default is 12.0000E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | The upper time limit for the trigger condition. |
Sets the time qualifier used for the MIL1553B bus search trigger. The factory default is MORETHAN.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | MORETHAN | Time qualifier used for the search trigger. |
Sets the parallel bus trigger value for bus B1. The factory default is the quoted X-pattern shown in the table.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Parallel bus trigger value. |
Sets the RS232C trigger condition for SEARCH1 bus trigger A on bus B1. The factory default is TXSTART.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | TXSTART | RS232C trigger condition. |
Sets the receive data size for the RS232C bus trigger search. The factory default value is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | Receive data size. |
Sets the receive data value used for RS-232C bus trigger search. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Receive data value to match. |
Sets the transmit data size for the RS232C bus trigger pattern. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | Transmit data size. |
Sets the transmit data value for the RS232C bus trigger search condition. The factory default is a string of eight X characters.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Transmit data value. |
Sets the SPI search trigger condition for bus B1. The factory default is SS.
Sets the default MISO data pattern used for SPI bus trigger search. The factory default value is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | MISO data pattern value. |
Sets the SPI MOSI data value used for trigger search on bus B1. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | SPI MOSI data value pattern. |
Sets the factory-default size used for the SPI data search trigger condition.
Sets the high-value pattern for USB address triggering in bus B1. The factory default is a quoted X-filled string placeholder.
Sets the USB bus trigger address value used by the search trigger system. The factory default is "XXXXXXX".
Sets the USB bus trigger condition for search item 1. The factory default is SYNC.
Sets the high-value search string for USB data trigger matching.
Sets the default offset for USB data search triggering in Search1 Bus1. The factory default value is -1.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | real | - | USB data offset value. |
Sets the search trigger USB data size default value. This entry appears in the factory defaults table.
Sets the factory-default value for the USB data type used by search trigger bus B1. The default value is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| value | - | - |
Sets the factory-default value for the USB endpoint value search trigger setting. The default shown is a quoted 4-character string placeholder.
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:ERRTYPEset / query
Sets the USB error type used for the bus trigger search factory default. The factory default value is PID.
Sets the USB handshake type used by the A bus trigger search. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| handshaketype | enum | ANY | USB handshake type. |
Sets the USB trigger qualifier used by the search trigger bus definition. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | USB trigger qualifier. |
Sets or queries the USB SOF frame number used for trigger search on bus B1. The factory default is shown as a quoted 11-character value.
Sets the USB special type used for search triggering on bus B1. Factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| specialtype | enum | ANY | USB special type setting. |
Sets the USB token type used for the bus trigger search default. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| token type | enum | ANY | USB token type. |
Sets the high-value address used by the MIL-STD-1553B status-address trigger search. The factory default value is "XXXXX".
:SEARCH:SEARCH1:TRIGGER:A:BUS:SOURCEset / query
Sets the bus source used by Search1 trigger A. The factory default is B1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | B1 | Bus source selection. |
:SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPEset / query
Sets the edge slope used for Search1 trigger A. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISE | FALL | Edge slope selection for trigger A. |
:SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCEset / query
Selects the source for the A-edge search trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | - |
:SEARCH:SEARCH1:TRIGGER:A:LEVELset / query
Sets the trigger A level for the search trigger. Factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | Trigger level setting. |
:SEARCH:SEARCH1:TRIGGER:A:LEVEL:CH1set / query
Sets the default trigger A level for channel 1 in the search 1 trigger subsystem. The factory default value is 0.0E+0.
:SEARCH:SEARCH1:TRIGGER:A:LEVEL:MATHset / query
Sets the trigger A level for the MATH source in Search1. The factory default value is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | Trigger level for the MATH source. |
:SEARCH:SEARCH1:TRIGGER:A:LEVEL:REF1set / query
Sets the reference level for SEARCH1 trigger A. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | Reference trigger level for REF1. |
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:FUNCTIONset / query
Sets the logical function used by trigger A in Search1. The factory default is AND.
| Name | Type | Values | Description |
|---|---|---|---|
| function | enum | AND | Logical function for the trigger. |
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:INPUT:CH1set / query
Sets the logic input state for channel 1 in Search1 trigger A. The factory default is X.
Sets the edge used by the clock input for Search1 trigger A logic triggering. The factory default is RISE.
Sets the clock source used by the A logic trigger input in Search1. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | NONE | Clock source for the logic input. |
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:INPUT:D10set / query
Sets the default factory value for the logic input D10 under search trigger A. The factory default listed for this item is X.
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:INPUT:MATHset / query
Sets the logic input source for SEARCH1 trigger A. The factory default is MATH.
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:INPUT:REF1set / query
Factory default for the logic input source of SEARCH1 trigger A. The page lists this item as having an X default value.
Sets the factory default for the specified logic pattern input assignment. This page lists D10 as a default input selection under SEARCH1 trigger A logic pattern input settings.
| Name | Type | Values | Description |
|---|---|---|---|
| input | enum | D10 | Logic pattern input channel selection. |
:SEARCH:SEARCH1:TRIGGER:A:LOGIC:PATTERN:WHENset / query
Sets the condition used for the A logic pattern search trigger. The factory default is TRUE.
Sets the lower limit used by the SEARCH1 trigger A logic pattern WHEN condition. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | s | Lower limit for the pattern WHEN condition. |
Sets the upper time limit used by the A logic pattern search trigger. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| morelimit | real | s | Upper limit time for the pattern search condition. |
Sets the trigger A logic threshold for channel 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Trigger threshold level for CH1. |
Sets the logic trigger threshold for the MATH source in Search1, A trigger. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| MATH | real | V | Threshold level for the MATH source. |
Sets the trigger A logic threshold reference level for REF1. The factory default value is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| REF1 | real | V | Threshold reference level for REF1. |
:SEARCH:SEARCH1:TRIGGER:A:LOWERTHRESHOLD:CH1set / query
Sets the lower threshold for trigger A on the specified source. The factory default for CH1 is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| CH1 | real | V | Lower threshold value for channel 1. |
Sets the lower threshold used for SEARCH1 trigger A on the selected source. The factory default for the MATH source is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Lower threshold value for the MATH trigger source. |
Sets the lower threshold for the A trigger search entry. The factory default for REF1 is 0.0E+0.
Sets the upper pulse-width limit for the A search trigger. This factory-default value is 12.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | s | Upper limit for pulse width. |
Factory default for the pulse-width trigger low limit in search 1, trigger A. The default value is 8.0000E-9.
Sets the default polarity for pulse-width trigger search on source A. The factory default is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | Selects the pulse-width trigger polarity. |
:SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:WHENset / query
Sets the default condition value for the A pulse-width trigger's WHEN setting.
:SEARCH:SEARCH1:TRIGGER:A:PULSEWIDTH:WIDTHset / query
Sets the default pulse-width trigger width for Search1 trigger A. The factory default value is 8.0000E-9 s.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Pulse-width trigger width. |
:SEARCH:SEARCH1:TRIGGER:A:RUNT:POLARITYset / query
Sets the default polarity for the A runt trigger in Search1. The factory default value is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | Polarity setting for the runt trigger. |
:SEARCH:SEARCH1:TRIGGER:A:RUNT:WHENset / query
Sets the factory default for the RUNT WHEN trigger setting. The default value is OCCURS.
| Name | Type | Values | Description |
|---|---|---|---|
| when | enum | OCCURS | RUNT trigger condition. |
:SEARCH:SEARCH1:TRIGGER:A:RUNT:WIDTHset / query
Sets the width used for the A runt trigger. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | 0.0 | Width setting for the runt trigger. |
:SEARCH:SEARCH1:TRIGGER:A:SETHOLD:CLOCK:EDGEset / query
Sets the default edge setting used by the A set/hole trigger clock. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISE | Edge selection for the A set/hole trigger clock. |
Sets the source for the clock used by the Set/Hold trigger on A. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Clock source for the Set/Hold trigger. |
Sets the clock threshold used for the A set-hold trigger search. The factory default value is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Clock threshold level. |
Sets the data source used for the A set-hold trigger in Search1. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | NONE | Data source for the set-hold trigger. |
Sets the data threshold used for set-hold triggering on search 1, trigger A. The factory default is 9.91E+37.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Data threshold for set-hold triggering. |
:SEARCH:SEARCH1:TRIGGER:A:SETHOLD:HOLDTIMEset / query
Sets the hold time for the A set/hold trigger in Search1. The factory default is 8.0000E-9 s.
| Name | Type | Values | Description |
|---|---|---|---|
| holdtime | real | s | Hold time for the A set/hold trigger. |
:SEARCH:SEARCH1:TRIGGER:A:SETHOLD:SETTIMEset / query
Sets the default sethold settime value for search trigger A. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| settime | real | s | Sethold settime value. |
Sets the source-specific threshold used by the A set-hold trigger, with a separate threshold value for each listed channel or reference input. The factory default for CH1 is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Threshold value for the selected source channel. |
Sets the threshold for the MATH source used by the Search 1 A set/hhold trigger. The page shows its factory default value as 0.0E+0.
Sets the reference 1 threshold used by the A set-hold trigger. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Reference 1 threshold value for the set-hold trigger. |
:SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:POLARITYset / query
Sets the timeout trigger polarity for search1 trigger A. The factory default is STAYSHIGH.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | STAYSHIGH | Timeout trigger polarity. |
:SEARCH:SEARCH1:TRIGGER:A:TIMEOUT:TIMEset / query
Sets the factory-default timeout interval used by the A timeout trigger search. The default value is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Timeout interval. |
Sets the factory default delay time for Search1 trigger A transition search. The default value shown is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| deltatime | real | s | Delay time used by the transition trigger search. |
Sets the polarity used for the SEARCH1 trigger A transition condition. The factory default is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | NEGATIVE | Polarity for the transition trigger. |
:SEARCH:SEARCH1:TRIGGER:A:TRANSITION:WHENset / query
Sets the search trigger A transition condition to which edge-speed relation will qualify a trigger. The factory default is SLOWER.
:SEARCH:SEARCH1:TRIGGER:A:TYPEset / query
Sets the trigger type for search trigger A. The factory default is EDGE.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | EDGE | Trigger type. |
:SEARCH:SEARCH1:TRIGGER:A:UPPERTHRESHOLD:CH1set / query
Sets the upper threshold for CH1 in Search1 trigger A. The factory default is 800.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Upper threshold voltage for CH1. |
Sets the upper threshold for the specified search trigger source. The factory default for the MATH source is 800.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | MATH | Trigger source for which the upper threshold is set. |
Sets the upper threshold reference for search trigger A on REF1. The factory default is 800.0000E-3.
:SEARCH:SEARCH1:STATEset / query
Turns search 1 on or off.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables search 1. |
Returns the total number of search results for Search1. In the example, it returns 3 for three qualifying negative runt pulses.
integer - Total number of search hits found by SEARCH1.
SEARCH:SEARCH1:TOTal?
:SEARCH:SEARCH1:TRIGger:A:LOWerthreshold:CH2set / query
Specifies the lower threshold level for CH2 in search/trigger setup. In the example, the threshold is set to 1.4 volts.
| Name | Type | Values | Description |
|---|---|---|---|
| voltage | real | V | Lower threshold level for CH2. |
:TRIGger:A:LOWerthreshold:CH2 1.4 SEARCH:SEARCH1:TRIGger:A:LOWerthreshold:CH2 -2
:SEARCH:SEARCH1:TRIGger:A:UPPerthresholdset / query
Sets the upper threshold used by search trigger A for the specified channel. The example shows it used with CH3 as part of a runt search.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | 1 - 4 | Channel number whose upper threshold is being set. |
| threshold | real | V | Upper threshold level in volts. |
SEARCH:SEARCH1:TRIGger:A:UPPerthreshold: CH3 1.4
:SEARCH:SEARCH1:TRIGger:A:LOGIc:INPut:CH1set / query
Specifies the Boolean logic criteria for channel 1 in a logic search.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | HIGH | Boolean logic criterion for channel 1. |
:SEARCH:SEARCH1:TRIGger:A:LOGIc:PATtern:WHEnset / query
Specifies the condition for generating a logic pattern search.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | TRUE | Condition for generating a logic pattern search. |
Sets the threshold for channel 1 used by the logic search. The example shows it specified in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Threshold voltage for CH1. |
SEARCH:SEARCH1:TRIGger:A:LOGIc:THReshold:CH1 1.4
:CH<x>:BANdwidth:FILTer:OPTIMIZationset / query
Sets or queries the channel filter shape.
:CH<x>:PRObe:TRACking:OFFSetset / query
Sets or queries the offset tracking state of the probe attached to the specified channel.
:CH<x>:PRObe:TRACking:VTERmset / query
Sets or queries the vterm tracking state of the probe attached to the specified channel.
:CH<x>:BANdwidthset / query
Sets or queries the selectable low-pass bandwidth limit filter of the specified channel. The query form always returns the approximate realized bandwidth of the channel.
| Name | Type | Values | Description |
|---|---|---|---|
| bandwidth | real | - | Desired channel bandwidth limit, or FULl to disable bandwidth limiting. |
CH1:BANDWIDTH 20 sets the bandwidth of Channel 1 to 20 MHz. CH2:BANDWIDTH? might return CH2:BANDWIDTH 500.0000E+06, indicating that there is bandwidth limiting on Channel 2.
:CH<x>:BANdwidth?query
Sets or queries the selectable low-pass bandwidth limit filter of the specified channel. The query form always returns the approximate realized bandwidth of the channel.
real (Hz) - The approximate realized bandwidth of the specified channel.
CH2:BANDWIDTH? might return CH2:BANDWIDTH 500.0000E+06, indicating that there is bandwidth limiting on Channel 2.
:CH<x>?query
Returns the vertical parameters for the specified channel. The channel is specified by x.
string - Returns the vertical parameters for the specified channel.
CH1?
:CH<x>:BANdwidth:FILTer:OPTIMizAtionset / query
Sets the channel bandwidth filter optimization for the specified channel. Only available on 6 Series MSO instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| mode | enum | STEPRESPONSE | FLATNESS | Selects the filter optimization mode. |
CH1:BANdwidth:FILTer:OPTIMIZation FLATNESS CH1:BANdwidth:FILTer:OPTIMIZation?
Sets or queries the bandwidth filter optimization for the specified channel. Available only on 6 Series MSO instruments.
enum - Returns the current filter optimization setting for the specified channel.
CH1:BANdwidth:FILTer:OPTIMIZation FLATNESS CH1:BANdwidth:FILTer:OPTIMIZation?
:CH<x>:CLIPping?query
Queries whether the specified channel’s input signal is clipping, meaning it is exceeding the channel A/D converter range. The channel is specified by x.
enum - Returns 0 if the channel is not clipping and 1 if the channel is clipping.
CH4:CLIPping? might return CH4:CLIPping? 1, indicating that the point signal range is exceeding (clipping) the channel 4 A/D converter range.
:CH<x>:COUPlingset / query
Sets or queries the input coupling setting for the specified analog channel. The channel is specified by x and the available arguments depend on the attached accessories.
| Name | Type | Values | Description |
|---|---|---|---|
| coupling | enum | AC | DC | DCR | Input coupling setting for the specified channel. |
:CH<x>:COUPling?query
Sets or queries the input coupling setting for the specified analog channel. The channel is specified by x; available arguments depend on the attached accessories.
enum - Returns the coupling setting for the specified channel.
CH2:COUPLING AC sets Channel 2 coupling to AC. CH3:COUPLING? might return CH3:COUPLING DC, indicating that Channel 3 is set to DC coupling.
:CH<x>:DESKewset / query
Sets or queries the horizontal deskew time for the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| deskew time | real | -125 ns - +125 ns | Deskew time for this channel. |
CH4:DESKEW 5.0E-9 sets the deskew time for Channel 4 to 5 ns. CH2:DESKEW? might return CH2:DESKEW 2.0000E-09, indicating that the deskew time for Channel 2 is set to 2 ns.
:CH<x>:DESKew?query
This command sets or queries the horizontal deskew time for the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| deskew time | real | -125 ns - +125 ns | Deskew time for this channel. |
real (ns) - Returns the deskew time for the specified channel.
CH4:DESKEW 5.0E-9 sets the deskew time for Channel 4 to 5 ns. CH2:DESKEW? might return CH2:DESKEW 2.0000E-09, indicating that the deskew time for Channel 2 is set to 2 ns.
:CH<x>:DITHERrangeset / query
Sets the amount of dithering for the specified channel as a percentage of full scale. A value of 0.0 disables dithering.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number specified in the command mnemonic. |
| amount | real | 0.0 - 100.0 | Amount of dithering as a percentage of full scale. |
CH1:DITHERrange 10 CH1:DITHERrange? might return CH1:DITHERrange 10
:CH<x>:INVertset / query
Sets or queries the invert state of the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns channel invert on or off. |
| value | integer | - | Numeric form of invert state; 0 turns invert off, any other value turns it on. |
enum - Returns the invert state of the specified channel.
CH2:INVert OFF turns off the invert on channel 2. CH2:INVert? might return CH2:INVert 1, indicating channel 2 is inverted.
:CH<x>:INVert?query
Sets or queries the invert state of the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Invert state for the specified channel. |
enum - Returns the invert state of the specified channel as 0 or 1, indicating off or on.
CH2:INVert OFF turns off the invert on channel 2. CH2:INVert? might return CH2:INVert 1, indicating channel 2 is inverted.
:CH<x>:LABel:COLorset / query
Sets or queries the color of the specified channel label. The channel is specified by x, and sending an empty string returns the label color to the default color.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The label color. |
CH5:LABEL:COLOR "".
:CH<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified channel label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns bold font on or off. |
| NR1 | integer | - | 0 turns off bold font; any other value turns it on. |
enum - Returns the bold state of the specified channel label.
CH2:LABel:FONT:BOLD OFF CH2:LABel:FONT:BOLD? might return CH2:LABEL:FONT:BOLD 1, indicating a bold font.
:CH<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified channel label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| state | enum | ON | OFF | <NR1> | Turns italic font on or off; <NR1> = 0 turns it off and any other value turns it on. |
CH2:LABel:FONT:ITALic ON CH2:LABel:FONT:ITALic? might return CH2:LABEL:FONT:ITALIC 0, indicating the font is not italic.
:CH<x>:LABel:FONT:SIZEset / query
Sets the font size of the specified channel label. The channel is specified by x, and the size is given as an NR1 value in point size.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | Channel number x. |
| size | integer | point | Font size in point size. |
CH2:LABel:FONT:SIZE 16 sets the font size to 16 point size. CH2:LABel:FONT:SIZE? might return CH2:LABEL:FONT:SIZE 20, indicating a 20 point font size.
:CH<x>:LABel:FONT:TYPEset / query
Sets or queries the font type of the specified channel label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Specified font type. |
string - Returns the specified channel label font type as a quoted string.
CH2:LABel:FONT:TYPE "Monospace" sets the font to a mono space font. CH2:LABel:FONT:TYPE? might return CH2:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:CH<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified channel label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Underline state of the specified channel label. |
| value | integer | - | Numeric form of the underline state; 0 turns underline off and any other value turns it on. |
:CH<x>:LABel:NAMeset / query
Sets or queries the label attached to the displayed waveform for the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | An alphanumeric character string used as the waveform label. |
string - Returns the current waveform label for the specified channel.
CH2:LABEL:NAME "Pressure" changes the waveform label for the Channel 2 waveform to “Pressure”. CH3:LABEL:NAME? might return CH3:LABEL:NAME "Force", indicating that the waveform label for the Channel 3 waveform is “Force".
:CH<x>:LABel:NAMe?query
Sets or queries the label attached to the displayed waveform for the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | An alphanumeric character string 1 through 32 characters in length. |
string - Returns the waveform label for the specified channel.
CH2:LABEL:NAME "Pressure" changes the waveform label for the Channel 2 waveform to “Pressure”. CH3:LABEL:NAME? might return CH3:LABEL:NAME "Force", indicating that the waveform label for the Channel 3 waveform is “Force".
:CH<x>:LABel:XPOSset / query
Sets or queries the X-position of the specified channel label. The position is given in pixels relative to the left edge of the screen.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number specified by x. |
| position | real | pixels | Location in pixels where the waveform label is displayed, relative to the left edge of the screen. |
CH3:LABEL:XPOS 5 moves the waveform label for Channel 3 so that it begins 5 pixels to the right of the left edge of the screen.
:CH<x>:LABel:XPOS?query
Sets or queries the X-position of the specified channel label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number x. |
| x-position | real | pixels | Location of the waveform label relative to the left edge of the screen. |
real (pixels) - Returns the X-position of the specified channel label in pixels.
CH3:LABEL:XPOS 5 moves the waveform label for Channel 3 so that it begins 5 pixels to the right of the left edge of the screen. CH3:LABEL:NAME? might return CH2:LABEL:XPOS 5, indicating that the waveform label for the Channel 2 currently 5 pixels to the right of the left edge of the screen.
:CH<x>:LABel:YPOSset / query
Sets the vertical Y-position of the waveform label for the selected channel relative to the waveform baseline. Positive values place the label above the baseline and negative values below it.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| ypos | real | pixels | Location in pixels where the waveform label is displayed, relative to the waveform baseline. |
CH3:LABEl:YPOS -20
:CH<x>:LABel:YPOS?query
Returns or sets the vertical position, in pixels, of the waveform label for the selected channel relative to the waveform baseline. Positive values are above the baseline and negative values are below.
integer (pixels) - The waveform label position in pixels relative to the waveform baseline.
CH2:LABEl:YPOS? might return CH2:LABEL:YPOS 0, indicating that the waveform label for the Channel 2 is currently located at the baseline of the waveform.
:CH<x>:OFFSetset / query
Sets or queries the vertical offset for the specified analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | real | - | The offset value for the specified channel. |
real - Returns the vertical offset for the specified channel.
CH3:OFFSET 2.0E-3 sets the offset for Channel 3 to 2 mV. CH4:OFFSET? might return CH4:OFFSET 1.0000E-03, indicating that the offset for Channel 4 is set to 1 mV.
:CH<x>:OFFSet?query
Sets or queries the vertical offset for the specified analog channel.
real - Returns the current vertical offset for the specified channel.
CH3:OFFSET 2.0E-3 sets the offset for Channel 3 to 2 mV. CH4:OFFSET? might return CH4:OFFSET 1.0000E-03, indicating that the offset for Channel 4 is set to 1 mV.
:CH<x>:POSitionset / query
Sets or queries the vertical position for the specified analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number. |
| position | real | - | Vertical position for the specified analog channel. |
:CH<x>:POSition?query
Returns the vertical position of the specified channel in divisions.
real - Returns the present channel position in divisions.
CH2:POSition -2.0 sets the position to -2 divisions. CH2:POSition? might return CH2:POSITION -2.2400, indicating the position is -2.24 divisions.
:CH<x>:PROBECal?query
Returns the probe calibration state for the specified channel. The channel is specified by x.
enum - Returns the probe calibration state for the specified channel.
:CH<x>:PRObe?query
Returns all information concerning the probe attached to the specified channel. The channel is specified by x.
string - Returns all information concerning the probe attached to the specified channel, formatted as a probe information string.
CH2:PROBE? might return CH2:PROBE:GAIN 1.0000E-01; RESISTANCE1.0000E+07;UNITS "V";ID:TYPE "10X"'SERNUMBER "N/A" for a 10Xprobe, indicating that (among other parameters) the attenuation factor for the probeattached to Channel 2 is 100.0 mV (assuming that probe units are set to volts).
:CH<x>:PROBECOntrolset / query
Sets or queries the multirange probe range-control policy preference of the probe attached to CH<x>. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANual | Sets the probe range-control policy to automatic or manual. |
enum - Returns the current multirange probe range-control policy preference for the selected channel.
CH2:PROBECONTROL AUTO sets the values and the probe range is automatically calculated. CH2:PROBECONTROL? might return CH2:PROBECONTROL MANUAL indicating that you can select various valid values for the probe connected to channel 2.
:CH<x>:PROBECOntrol?query
Sets or queries the multirange probe range-control policy preference for the probe attached to the specified channel. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANual | Selects whether the probe range is automatically calculated or whether valid values can be selected manually. |
enum - Returns the probe range-control policy preference for the selected channel.
CH2:PROBECONTROL AUTO sets the values and the probe range is automatically calculated. CH2:PROBECONTROL? might return CH2:PROBECONTROL MANUAL indicating that you can select various valid values for the probe connected to channel 2.
:CH<x>:PRObe:COMPensateset / query
Starts the probe compensation procedure for passive probes. The channel is specified by x.
CH2:PRObe:COMPensate starts probe compensation for passive probes (TPP).
:CH<x>:PRObe:DEGAUSSset / query
Starts a degauss cycle of the TekVPI probe attached to the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
Queries whether the probe attached to the specified channel requires a degauss operation. The channel is specified by x.
enum - Required indicates the probe should be degaussed before taking measurements. Recommended indicates the measurement accuracy might be improved by degaussing the probe. Passed indicates the probe is degaussed. Failed indicates the degauss operation failed. Inprocess indicates the probe degauss operation is currently in progress.
CH2:PROBE:DEGAUSS:STATE? might return CH2:PROBE:DEGAUSS:STATE PASSED, indicating that the probe attached to the Channel 2 is degaussed.
:CH<x>:PRObe:FORCEDRangeset / query
Sets the attached TekVPI probe to the specified range, or queries the probe range for the specified channel. If the value does not match an available range, the closest range is selected.
| Name | Type | Values | Description |
|---|---|---|---|
| range | real | - | The TekVPI probe range to set. |
Sets the attached TekVPI probe to the specified range, or queries the range of the probe attached to the specified channel. If the value does not match one of the available ranges, the closest range is selected.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | Range to set on the attached probe. |
real - Returns the current range of the probe attached to the specified channel.
:CH<x>:PROBEFunc:EXTAttenset / query
Specifies the attenuation value as a multiplier to the given scale factor on the specified channel. The query form returns the user-specified attenuation.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | 1.00E-10 - 1.00E+10 | Attenuation value specified as a multiplier. |
real - Returns the user-specified attenuation.
CH1:PROBEFUNC:EXTATTEN 167.00E-3 specifies an external attenuation, which is connected between the your input signal and the input of the probe attached to Channel 1. CH2:PROBEFUNC:EXTATTEN? might return CH2:PROBEFUNC:EXTATTEN 1.0000E+00, indicating that the probe attached to Channel 2 is connected directly to the user's signal.
Sets or queries the external attenuation value as a multiplier for the specified channel. The query form returns the user-specified attenuation.
| Name | Type | Values | Description |
|---|---|---|---|
| attenuation | real | 1.00E-10 - 1.00E+10 | Attenuation value specified as a multiplier. |
real - The user-specified attenuation value as a multiplier.
CH2:PROBEFUNC:EXTATTEN? might return CH2:PROBEFUNC:EXTATTEN 1.0000E+00, indicating that the probe attached to Channel 2 is connected directly to the user's signal.
:CH<x>:PROBEFunc:EXTDBattenset / query
Sets or queries the input-output ratio of external attenuation or gain between the signal and the instrument input channels in decibels. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | -1.00E+10 - 1.00E+10 | Attenuation or gain value in decibels. |
real (dB) - Returns the user-specified attenuation in decibels.
Sets or queries the input-output ratio in decibels for external attenuation or gain between the signal and the instrument input channels. The channel is specified by x; the query form returns the user-specified attenuation in decibels.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| attenuation | real | 1.00E-10 - 1.00E+10 | External attenuation or gain multiplier. |
real (dB) - Returns the user-specified attenuation in decibels.
:CH<x>:PROBEFunc:EXTUnitsset / query
Sets the unit of measurement for the external attenuator of the specified channel. Alternate units are used if enabled, and the state can be controlled with CH<x>:PROBEFunc:EXTUnits:STATE.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| unit | string | - | Attenuation unit of measurement for the specified channel. |
string - Returns the current external attenuator unit setting for the specified channel, followed by the associated attenuation value.
CH4:PROBEFUNC:EXTUNITS "Pascals" sets the unit of measurement for the Channel 4 external attenuator. CH2:PROBEFUNC:EXTUNITS? might return CH2:PROBEFUNC:EXTUNITS "Pascals" 2.5000E+00, indicating that the Channel 2 external attenuator units of measurement are Pascals.
:CH<x>:PROBEFunc:EXTUnits:STATEset / query
Sets the custom units enable state for the specified channel.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the alternate units for the specified channel. |
Sets or queries the unit of measurement for the external attenuator of the specified channel. Alternate units can be used if enabled via the related state command.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| unit | string | - | Attenuation unit of measurement for the specified channel. |
string - Returns the channel external attenuator unit setting and attenuation value.
CH4:PROBEFUNC:EXTUNITS "Pascals" sets the unit of measurement for the Channel 4 external attenuator. CH2:PROBEFUNC:EXTUNITS? might return CH2:PROBEFUNC:EXTUNITS "Pascals" 2.5000E+00, indicating that the Channel 2 external attenuator units of measurement are Pascals.
Turns external units on or off for the specified channel. A value of 0 turns external units off; any other <NR1> value turns them on.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Selects whether external units are off or on. |
enum - Returns the external-units state for the specified channel.
CH2:PROBEFunc:EXTUnits:STATE ON CH2:PROBEFunc:EXTUnits:STATE? might return CH2:PROBEFUNC:EXTUNITS:STATE 0, indicating that external units are off for the specified channel.
:CH<x>:PRObe:GAIN?query
Returns the gain factor of the probe attached to the specified channel. The channel is specified by x.
real - Returns the probe gain factor for the specified channel.
CH2:PROBE:GAIN? might return CH2:PROBE:GAIN 100.0000E-3, indicating that the attached 10X probe delivers 0.1 V to the Channel 2 BNC for every 1.0 V applied to the probe input.
Returns the serial number of the probe attached to the specified channel. For Level 0 and 1 probes, the serial number is "N/A".
string - The probe serial number for the specified channel.
:CH<x>:PRObe:ID?query
Returns the type and serial number of the probe attached to the specified channel. The channel is specified by x.
string - Returns the probe identification information for the specified channel, including probe type and serial number.
CH2:PROBE:ID? might return CH2:PROBE:ID:TYPE "10X";SERNUMBER "N/A", indicating that a passive 10X probe of unknown serial number is attached to Channel 2.
Returns the type of probe attached to the specified channel. The channel is specified by x.
string - Returns the type of probe attached to the specified channel.
CH1:PROBE:ID:TYPE? might return CH1:PROBE:ID:TYPE "P77C292MM", indicating that a P77C292MM probe is attached to Channel 1.
:CH<x>:PRObe:INPUTModeset / query
Sets or queries the input mode of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | A | B | COMMONMODE | DIFFERENTIAL | Selects the probe input mode. |
CH8:PROBE:INPUTMODE COMMONMODE CH6:PROBE:INPUTMODE?
:CH<x>:PRObe:INPUTMode:AOFFSetset / query
Sets or queries the A mode offset control of the probe that is attached to the specified channel.
Sets or queries the input mode of the probe attached to the specified channel. Requires a probe with dual inputs.
enum - Returns the current probe input mode for the specified channel.
CH8:PROBE:INPUTMODE COMMONMODE CH6:PROBE:INPUTMODE?
Sets or queries the A mode offset control value of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by <x>. |
| a mode offset | real | V or A | Sets the A mode offset value in vertical units. |
real (V or A) - Returns the A mode offset value of the probe attached to the specified channel.
CH2:PROBE:INPUTMODE:AOFFSET 5.0 CH1:PROBE:INPUTMODE:AOFFSET?
:CH<x>:PRObe:INPUTMode:BOFFSetset / query
Sets or queries the B mode offset control of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | Channel number. |
| <NR3> | real | V or A | Sets the B mode offset value in vertical units. |
CH2:PROBE:INPUTMODE:BOFFSET 5.0 CH5:PROBE:INPUTMODE:BOFFSET?
Sets or queries the B mode offset control of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | Channel number. |
| <NR3> | real | V or A | Sets the B mode offset value in vertical units. |
real (V or A) - Returns the B mode offset value of the probe attached to the specified channel.
CH2:PROBE:INPUTMODE:BOFFSET 5.0 CH5:PROBE:INPUTMODE:BOFFSET? 1.2500
:CH<x>:PRObe:INPUTMode:COFFSetset / query
Sets or queries the common-mode offset value of the probe attached to the specified channel. The offset is specified in vertical units.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number x. |
| offset | real | V or A | C (common) mode offset value. |
real (V or A) - Returns the C mode offset value set for the probe attached to the specified channel.
CH7:PROBE:INPUTMODE:COFFSET 3.2 CH5:PROBE:INPUTMODE:COFFSET? 1.0250
Queries the C (common) mode offset value of the probe attached to the specified channel. The channel is specified by x, and the returned value is in vertical units (V or A).
real (V or A) - Returns the C (common) mode offset value of the probe attached to the specified channel, in vertical units (V or A).
CH5:PROBE:INPUTMODE:COFFSET? 1.0250
:CH<x>:PRObe:INPUTMode:DOFFSetset / query
Sets or queries the differential offset value of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| offset | real | V or A | Sets the D (differential) mode offset value, in vertical units. |
CH7:PROBE:INPUTMODE:DOFFSET 3.2 CH5:PROBE:INPUTMODE:DOFFSET?
Sets or queries the differential offset value of the probe attached to the specified channel. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| value | real | V or A | D (differential) mode offset value in vertical units. |
real (V or A) - Returns the D mode offset value of the probe attached to the specified channel.
CH7:PROBE:INPUTMODE:DOFFSET 3.2 CH5:PROBE:INPUTMODE:DOFFSET?
Returns the resistance of the probe attached to the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
returns - Returns the resistance of the probe attached to the specified channel.
:CH<x>:PRObe:SELFCalset / query
Initiates self-calibration on the probe for the specified channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| EXECUTE | enum | EXECUTE | Executes the probe self-calibration. |
CH1:PRObe:SELFCal EXECUTE runs self-calibration on the Channel 1 probe.
Returns the self-calibration state for the specified channel’s probe.
enum - The self-calibration state.
CH1:PRObe:SELFCal:State? might return CH1:PRObe:SELFCal:State RUNNING, indicating that the Channel 1 probe is currently running a self-calibration.
:CH<x>:PRObe:SETset / query
Sets or queries aspects of probe accessory user interfaces, such as probe attenuation factors or audible over-range. The available arguments vary depending on the attached accessory, and the channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Accessory-specific probe setting string. |
:CH<x>:PRObe:SET?query
Sets or queries aspects of probe accessory user interfaces, such as probe attenuation factors or probe audible over range. The available arguments vary depending on the accessory attached to the instrument, and the channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Accessory-specific argument string. |
:CH<x>:PROBETYPE?query
Returns the probe type connected to the specified channel. The channel is specified by x.
string - Returns the probe type connected to the specified channel.
:CH<x>:PRObe:STATus?query
Queries the probe unsigned integer error value. Returns the sum of binary error bits B0 through B15 as an integer.
integer - Returns an integer number that represents the sum total of binary error bits B0–B15. B0=Probe disabled, B1=Jaws open, B2=Over range, B3=Probe temperature out of limits, B4=Degauss needed, B5=Probe tip missing, B6=Probe tip failed, B7=Probe tip not supported, and B8 through B15 are reserved.
:CH<x>:PRObe:UNIts?query
Returns a string describing the units of measure for the probe attached to the specified channel. The channel is specified by x.
string - Returns a string describing the units of measure for the probe attached to the specified channel.
CH4:PROBE:UNITS? might return CH4:PROBE:UNITS "V", indicating that the units of measure for the probe attached to Channel 4 are volts.
:CH<x>:SCALERATioset / query
Sets or returns the scale ratio for the specified analog channel. The channel is specified by x.
:CH<x>:SCAleset / query
Sets or returns the vertical scale for the specified analog channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The vertical scale for the specified analog channel. |
real - Returns the vertical scale for the specified channel.
CH2:SCAle 200E-3 CH2:SCAle?
:CH<x>:SCAle?query
Sets or returns the vertical scale for the specified analog channel. The channel is specified by x.
real - Returns the vertical scale for the specified channel.
CH2:SCAle 200E-3 CH2:SCAle? might return CH2:SCALE 500.0000E-3 indicating the vertical scale for the specified channel is 500 mV per division.
:CH<x>:SCALERATio?query
Sets or queries the scale ratio for the specified analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| scale ratio | real | - | Scale ratio for the specified analog channel. |
real - Returns the scale ratio for the specified channel.
CH2:SCALERATio 2.0 sets the scale ratio to 2.0. CH2:SCALERATio? might return CH2:SCALERATIO 1.0000 indicating the scale ratio is 1.0.
:CH<x>:SV:CENTERFrequencyset / query
Sets or queries the center frequency of the specified spectrum trace channel for Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | 0.0 - maximum licensed bandwidth of the instrument | Spectrum trace center frequency for the specified channel. |
real (Hz) - Returns the spectrum trace center frequency for the specified channel.
CH4:SV:CENTERFrequency 3.0E+06 sets the center frequency of the channel 4 spectrum trace to 3 MHz. CH2:SV:CENTERFrequency? might return 1.0E+07, indicating that the center frequency of the channel 2 spectrum trace is set to 10 MHz.
Sets or queries the center frequency of the specified Spectrum View spectrum trace channel. The value is specified in hertz and must be within the instrument's licensed bandwidth.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | Channel number specified by x in CH<x>. |
| center frequency | real | 0.0 - maximum licensed bandwidth of the instrument | Center frequency for the specified spectrum trace channel. |
real (Hz) - Returns the spectrum trace center frequency for the specified channel.
CH4:SV:CENTERFrequency 3.0E+06 sets the center frequency of the channel 4 spectrum trace to 3 MHz. CH2:SV:CENTERFrequency? might return 1.0E+07, indicating that the center frequency of the channel 2 spectrum trace is set to 10 MHz.
:CH<x>:SV:POSitionset / query
Sets or queries the Spectrum Time setting of the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | The specified spectrum trace channel source. |
CH4:SV:POSition 3.0E+06 sets the Spectrum Time setting of channel 4. CH2:SV:POSition? might return 1.0E+07, indicating the Spectrum Time setting of channel 2.
:CH<x>:SV:POSition?query
Queries the spectrum time location for the specified spectrum trace channel, as a percentage of record length.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | 1 | Spectrum trace channel source. |
real (%) - Returns the spectrum time value as a percentage of the record length.
CH1:SV:POSition? might return 74.0, indicating that the spectrum time value of the channel 1 spectrum trace is set to 74%.
Queries whether the stop frequency for the specified spectrum trace channel is above the scope input bandwidth.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
enum - 0 specifies the stop frequency is not above the scope bandwidth. 1 specifies the stop frequency is above the scope bandwidth.
CH3:SV:SPANABovebw? might return 0, indicating the stop frequency is not above the scope bandwidth.
Queries whether the start frequency for the specified spectrum trace channel is below 0 Hz.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Spectrum trace channel source. |
enum - 0 specifies the start frequency is not below 0 Hz; 1 specifies the start frequency is below 0 Hz.
Queries the start frequency of the specified spectrum trace channel in the Spectrum View window.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Spectrum trace channel source. |
real (Hz) - Start frequency value in hertz.
CH3:SV:STARTFrequency? might return 35.7E+6, indicating the start frequency for the channel 3 spectrum trace is 35.7 MHz.
:CH<x>:SV:STATEset / query
Sets or queries the on/off setting of data acquisition for the specified spectrum trace channel.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
| state | enum | ON | OFF | Enables or disables spectrum data acquisition for the specified spectrum trace channel source. |
enum - Returns the current Spectrum View data acquisition setting for the specified spectrum trace channel.
SV:CH1:STATE ON turns on Spectrum View data acquisition for the channel 1 spectrum trace. SV:CH3:STATE? might return OFF, indicating that Spectrum View data acquisition is turned off for the channel 3 spectrum trace.
:CH<x>:SV:STATE?query
Sets or queries the on/off setting of data acquisition for the specified spectrum trace channel in the Spectrum View window.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | CH<x> specifies the spectrum trace channel source. |
| state | enum | ON | OFF | Enables or disables spectrum data acquisition for the specified spectrum trace channel source. |
enum - Returns the on/off state of spectrum data acquisition for the specified spectrum trace channel source.
SV:CH1:STATE ON turns on Spectrum View data acquisition for the channel 1 spectrum trace. SV:CH3:STATE? might return OFF, indicating that Spectrum View data acquisition is turned off for the channel 3 spectrum trace.
Queries the stop frequency of the specified spectrum trace channel in the Spectrum View window.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
:CH<x>:TERminationset / query
Sets or queries the vertical termination for the specified analog channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number specified by x. |
| resistance | real | 50 Ω - 1,000,000 Ω | Channel input resistance, specified as 50 Ω or 1,000,000 Ω. |
string - Returns the channel termination setting in the form CH<x>:TERMINATION <NR3>.
CH4:TERMINATION 50.0E+0 establishes 50 Ω impedance on Channel 1. CH2:TERMINATION? might return CH2:TERMINATION 50.0E+0, indicating that Channel 2 is set to 50 Ω impedance.
:CH<x>:TERmination?query
Sets or queries the vertical termination for the specified analog channel. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number x. |
| termination | real | 50 Ω - 1,000,000 Ω | Channel input resistance, which can be specified as 50 Ω or 1,000,000 Ω. |
real (Ω) - Returns the channel input resistance setting.
CH4:TERMINATION 50.0E+0 establishes 50 Ω impedance on Channel 1. CH2:TERMINATION? might return CH2:TERMINATION 50.0E+0, indicating that Channel 2 is set to 50 Ω impedance.
:CH<x>:VTERm:BIASset / query
Sets or queries the termination bias voltage for the specified channel, if control is available. Requires a probe with dual inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Channel number. |
| bias | real | - | Termination bias voltage. |
real - Returns the termination bias voltage value.
:CH<x>:VTERm:BIAS?query
Sets or queries the termination bias voltage for the specified channel, if control is available. Requires a probe with dual inputs.
real (V) - The termination bias voltage for the specified channel in volts.
:CH<x>:PRObe:AUTOZeroset / query
Executes the probe auto-zero operation for channel x. The command is listed as one of the instrument operations that can generate an Operation Complete event.
| Name | Type | Values | Description |
|---|---|---|---|
| execute | enum | EXECute | Triggers the auto-zero operation. |
:CH<x>:PRObe:DEGAUssset / query
Executes a probe degauss operation on the selected channel.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 8 | Channel number in the CH<x> node. |
| mode | enum | EXECute | Starts the degauss operation. |
:ACQuire:FASTAcq:PALEtteset / query
Sets or queries the waveform grading for fast acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| palette | enum | NORMal | TEMPerature | SPECtral | INVErted | Selects the waveform grading palette used for fast acquisition mode. |
enum - Returns the current waveform grading setting for fast acquisition mode.
ACQUIRE:FASTACQ:PALETTE TEMPerature ACQUIRE:FASTACQ:PALETTE?
Sets or queries the waveform grading for fast acquisition mode. The palette controls how trace intensity is displayed in fast acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| palette | enum | NORMal | TEMPerature | SPECtral | INVErted | Selects the fast acquisition waveform grading palette. |
enum - Returns the current fast acquisition waveform grading palette.
ACQUIRE:FASTACQ:PALETTE TEMPerature sets the acquisition fast acquisition palette to Temperature. ACQUIRE:FASTACQ:PALETTE? might return :ACQUIRE:FASTACQ:PALETTE TEMPERATURE.
:ACQuire?query
Queries the current acquisition state.
string - Returns the current acquisition state.
ACQUIRE? might return :ACQUIRE:STATE 1;NUMENV INFINITE;STOPAFTER RUNSTOP;SEQUENCE:MODE NUMACQS;NUMSEQUENCE 1;:ACQUIRE:NUMAVG 16;FASTACQ:STATE 0;PALETTE TEMPERATURE;:ACQUIRE:MODE SAMPLE;SAMPLINGMODE IT.
:ACQuire:FASTAVerage:LIMitset / query
Limits the number of averages performed in hardware at 16-bit resolution. The setting must be a divisor of the STOPafter count.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 10240 | Batch size to set. |
integer - Returns the current batch size in waveforms.
ACQUIRE:FASTAVERAGE:LIMIT 256 sets the batch size to 256 waveforms. ACQUIRE:FASTAVERAGE:LIMIT? might return :ACQUIRE:FASTAVERAGE:LIMIT 256, indicating the batch size is currently 256 waveforms.
Limits the number of averages performed in hardware at 16-bit resolution. The setting must be a divisor of the STOPafter count.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 10240 | Batch size to set. |
integer - Returns the current batch size for fast averaging limit.
ACQUIRE:FASTAVERAGE:LIMIT 256 ACQUIRE:FASTAVERAGE:LIMIT?
:ACQuire:FASTAcq:STATEset / query
Sets or queries the state of fast acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Enables or disables FASTAcq; 0 disables it and any other value turns it on. |
enum - Returns the fast acquisition mode state.
ACQUIRE:FASTACQ:STATE ON ACQUIRE:FASTACQ:STATE?
Sets or queries the state of fast acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | 0 disables FASTAcq; any other value turns the feature on. OFF disables the FASTAcq feature. ON enables the FASTAcq feature. |
enum - Returns the fast acquisition state.
ACQUIRE:FASTACQ:STATE ON ACQUIRE:FASTACQ:STATE?
:ACQuire:FASTAVerage:STATEset / query
Sets or queries fast average mode. Any nonzero value turns the feature on.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | Enables or disables fast average mode. |
enum - Returns the fast average mode state.
ACQUIRE:FASTAVERAGE:STATE 256 ACQUIRE:FASTAVERAGE:STATE? might return :ACQUIRE:FASTAVERAGE:STATE 0, indicating fast average mode is off.
:ACQuire:FASTAVerage:STOPafterset / query
Limits the total number of averages that will be accumulated before acquisitions stop. The count must be a multiple of the LIMit count and between 1 and 1000000.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 1000000 | Number of averages to accumulate. |
Returns the maximum real-time sample rate.
real - The maximum real-time sample rate.
:ACQuire:MODeset / query
Sets or queries the selected acquisition mode of the instrument. The available modes are Sample, Peak Detect, Hi Res, Average, and Envelope.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAMple | PEAKdetect | HIRes | AVErage | ENVelope | Selects the acquisition mode. |
enum - Returns the current acquisition mode.
ACQUIRE:MODE ENVELOPE ACQUIRE:MODE?
:ACQuire:NUMACq?query
Returns the number of acquisitions that have occurred since the last ACQuire:STATE RUN command.
integer - The number of acquisitions that have occurred since the last ACQuire:STATE RUN command.
ACQUIRE:NUMACQ? might return :ACQUIRE:NUMACQ 350, indicating that 350 acquisitions have occurred since executing an ACQuire:STATE RUN command.
:ACQuire:NUMAVgset / query
Sets or queries the number of waveform acquisitions that make up an averaged waveform. The allowed range is 2 to 10240.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 2 - 10240 | The number of waveform acquisitions to average. |
Returns the number of FastFrame frames which have been acquired.
integer - The number of FastFrame frames acquired.
ACQUIRE:NUMFRAMESACQUIRED? might return :ACQUIRE:NUMFRAMESACQUIRED 4 indicating 4 frames have been acquired.
In single sequence acquisition mode, this query returns the number of acquisitions or measurements in the sequence completed so far.
integer - Returns the number of acquisitions or measurements in the sequence completed so far.
:ACQuire:SEQuence:MODeset / query
Sets the single-sequence acquisition mode based on the number of acquisitions. In this mode, the stop-after count is based on the number of acquisitions.
| Name | Type | Values | Description |
|---|---|---|---|
| NUMACQs | integer | - | The number of acquisitions. |
:ACQuire:SEQuence:NUMSEQuenceset / query
In single sequence acquisition mode, specifies the number of acquisitions or measurements that comprise the sequence. The default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | Number of acquisitions or measurements that comprise the sequence. |
ACQUIRE:SEQUENCE:NUMSEQUENCE 2 ACQUIRE:SEQUENCE:NUMSEQUENCE?
:ACQuire:STOPAfterset / query
Sets or queries whether the instrument continually acquires data or acquires a single sequence. Pressing SINGLE on the front-panel is equivalent to `ACQuire:STOPAfter SEQuence` and `ACQuire:STATE 1`.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RUNSTop | SEQuence | Selects continuous acquisition or single-sequence acquisition. |
enum - Returns the current stop-after mode: `RUNSTop` for continuous acquisition or `SEQuence` for a single-sequence acquisition.
ACQUIRE:STOPAFTER RUNSTOP sets the instrument to continually acquire data. ACQUIRE:STOPAFTER? might return :ACQUIRE:STOPAFTER SEQUENCE, indicating that the next acquisition the instrument makes will be of the single-sequence type.
:ACQuire:STATEset / query
Sets acquisition state to run or single-sequence acquisition. This command supports Operation Complete only in single sequence acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | RUN | Sets acquisition state to ON/RUN (non-zero NR1). |
:ACQUIRE:FASTACQ:PALETTEset / query
Sets the FastAcq palette. The factory default is TEMPERATURE.
| Name | Type | Values | Description |
|---|---|---|---|
| palette | enum | TEMPERATURE | FastAcq display palette. |
:ACQUIRE:FASTACQ:STATEset / query
Sets the FastAcq state. The factory default is 0.
:ACQUIRE:MAGNIVUset / query
Sets or returns the MAGNIVU acquisition state. The factory default value is 0.
:ACQUIRE:MODEset / query
Sets the acquisition mode. The factory default is SAMPLE.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAMPLE | Acquisition mode. |
:ACQUIRE:NUMAVGset / query
Sets the number of acquisitions used for averaging. The factory default is 16.
:ACQUIRE:NUMENVset / query
Sets or returns the number of envelope averages used by acquisition. The factory default is INFINITE.
:ACQUIRE:STATEset / query
Sets the acquisition state. The factory default value is 1.
:ACQUIRE:STOPAFTERset / query
Sets the acquisition stop condition. The default value is RUNSTOP.
:ACQuire:MAGnivuset / query
Sets the acquisition magnification used for waveform transfer examples. In the example, it is set to 1 before transferring 25 points of digital data.
| Name | Type | Values | Description |
|---|---|---|---|
| v | real | - | Magnification factor. |
:ACQuire:MAGnivu 1
:ACTONEVent:ENableset / query
Enables or disables actions on event (AOE). If AOE saves are limited and the limit has been reached, this parameter disables AOE.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 - 1 | Number that enables or disables actions on event; zero disables the feature and one enables it. |
ACTONEVent:ENable 1 ACTONEVent:ENable?
:ACTONEVent:LIMITCountset / query
Sets the limit on the number of Act On Event saves. The :ACTONEVent:LIMit command must be enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | Limit value for Act On Event saves. |
:ACTONEVent:LIMitset / query
Sets whether Act On Event limits the number of saves, preventing saves from filling the hard drive.
enum - Returns whether Act On Event saving is limited.
ACTONEVent:LIMit SPECIFY_MAXIMUM ACTONEVent:LIMit? might return :ACTONEVent:LIMit UNLIMITED, indicating the limiting of act on event saves feature is disabled.
:ACTONEVent:MASKFail:ACTION:SAVEIMAGe:STATEset / query
Saves a screen capture when a mask test fails. The state can be enabled or disabled with ON/OFF, or controlled numerically with 0 disabling and any other number enabling the feature.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the save screen capture when a mask test fails feature. |
ACTONEVent:MASKFail:ACTION:SAVEIMAGe:STATE ON sets the state of the save screen capture feature to on. ACTONEVent:MASKFail:ACTION:SAVEIMAGe:STATE? might return :ACTONEVent:MASKFail:ACTION:SAVEIMAGe:STATE OFF, indicating the state of the save screen capture feature is set to off.
Enables or disables saving the source waveform(s) when a mask test fails. Zero disables the feature; all other numeric values and ON enable it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the save source waveform(s) when a mask test fails feature. |
ACTONEVent:MASKFail:ACTION:SAVEWAVEform:STATE ON ACTONEVent:MASKFail:ACTION:SAVEWAVEform:STATE?
:ACTONEVent:MASKFail:ACTION:SRQ:STATEset / query
Generates an SRQ event when a mask fails.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the SRQ event when a mask fails. |
ACTONEVent:MASKFail:ACTION:SRQ:STATE 1 ACTONEVent:MASKFail:ACTION:SRQ:STATE?
:ACTONEVent:MASKFail:ACTION:STOPACQ:STATEset / query
Enables or disables the stop acquisitions when a mask test fails feature.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Turns the stop-acquisitions-on-mask-fail feature on or off, or sets it with a numeric value. |
enum - Returns the current state of the stop acquisitions when a mask test fails feature.
ACTONEVent:MASKFail:ACTION:STOPACQ:STATE ON ACTONEVent:MASKFail:ACTION:STOPACQ:STATE?
:ACTONEVent:MASKHit:ACTION:SAVEIMAGe:STATEset / query
This command saves a screen capture when a mask hit occurs. It sets or queries whether the feature is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables saving a screen capture when a mask hit occurs. |
enum - Returns the current state of the save screen capture when a mask hit occurs feature.
ACTONEVent:MASKHit:ACTION:SAVEIMAGe:STATE ON ACTONEVent:MASKHit:ACTION:SAVEIMAGe:STATE?
This command saves the user-set source waveform(s) when a mask hit occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables saving the source waveform(s) when a mask hit occurs. |
ACTONEVent:MASKHit:ACTION:SAVEWAVEform:STATE ON ACTONEVent:MASKHit:ACTION:SAVEWAVEform:STATE?
:ACTONEVent:MASKHit:ACTION:SRQ:STATEset / query
Generates an SRQ event when a mask hit occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables generating an SRQ event when a mask hit occurs. |
:ACTONEVent:MASKHit:ACTION:STOPACQ:STATEset / query
Stops acquisitions when a mask hit occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the stop acquisitions when a mask hit occurs feature. |
ACTONEVent:MASKHit:ACTION:STOPACQ:STATE ON ACTONEVent:MASKHit:ACTION:STOPACQ:STATE? might return :ACTONEVent:MASKHit:ACTION:STOPACQ:STATE OFF, indicating the state of the stop acquisitions feature is set to off.
:ACTONEVent:MASKPass:ACTION:SAVEIMAGe:STATEset / query
This command saves a screen capture when a mask test passes.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables saving a screen capture when a mask test passes. |
ACTONEVent:MASKPass:ACTION:SAVEIMAGe:STATE {ON|OFF|<NR1>}
ACTONEVent:MASKPass:ACTION:SAVEIMAGe:STATE?Saves the user set source waveform(s) when a mask test passes.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables saving the source waveform(s) when a mask test passes. |
| value | integer | - | A number that enables or disables saving the source waveform(s) when a mask test passes; zero disables the feature and all other numbers enable it. |
ACTONEVent:MASKPass:ACTION:SAVEWAVEform:STATE ON ACTONEVent:MASKPass:ACTION:SAVEWAVEform:STATE?
:ACTONEVent:MASKPass:ACTION:SRQ:STATEset / query
Generates an SRQ event when a mask passes.
:ACTONEVent:MASKPass:ACTION:STOPACQ:STATEset / query
Stops acquisitions when a mask test passes. The state can be enabled or disabled with ON/OFF or an NR1 numeric value.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the stop-acquisition action when a mask test passes. |
ACTONEVent:MASKPass:ACTION:STOPACQ:STATE ON ACTONEVent:MASKPass:ACTION:STOPACQ:STATE?
Saves a screen capture when the user-set measurement limit is exceeded.
Saves the user-set source waveform(s) when the user-set measurement limit is exceeded.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables saving the source waveform(s) when the measurement limit is exceeded; zero disables the feature and all other numbers enable it. |
:ACTONEVent:MEASUrement:ACTION:SRQ:STATEset / query
Generates an SRQ event when any measurement triggers the user-defined measurement limits.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the generate an SRQ event when any measurement triggers the user-defined measurement limits feature. |
| value | integer | - | A number that enables or disables the generate an SRQ event when any measurement triggers the user-defined measurement limits feature; zero disables the feature and all other numbers enable it. |
ACTONEVent:MEASUrement:ACTION:SRQ:STATE 1 ACTONEVent:MEASUrement:ACTION:SRQ:STATE?
:ACTONEVent:MEASUrement:ACTION:STOPACQ:STATEset / query
Stops acquisitions when the user-set measurement limit is exceeded.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the stop acquisitions when the measurement limit is exceeded feature. |
| value | integer | - | A number that enables or disables the feature; zero disables it and all other numbers enable it. |
:ACTONEVent:SEARCH:ACTION:SAVEIMAGe:STATEset / query
This command saves a screen capture when a search event is found.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | NR1 | Enables or disables the save screen capture when a search event is found feature. |
enum - Returns the current state of the save screen capture when a search event is found feature.
ACTONEVent:SEARCH:ACTION:SAVEIMAGe:STATE ON ACTONEVent:SEARCH:ACTION:SAVEIMAGe:STATE?
:ACTONEVent:SEARCH:ACTION:SAVEWAVEform:STATEset / query
This command saves the user set source waveform(s) when a search event is found.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables saving the user set source waveform(s) when a search event is found. |
:ACTONEVent:SEARCH:ACTION:SRQ:STATEset / query
Generates an SRQ event when any search event is found. Use ON, OFF, or a numeric value to enable or disable the feature.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the generate an SRQ event when any search event is found feature. |
| value | integer | 0 | Numeric enable/disable value; zero disables the feature and all other numbers enable it. |
enum - Returns the current SRQ-state setting.
ACTONEVent:SEARCH:ACTION:SRQ:STATE 1 enables the generate an SRQ event when any search event is found feature. ACTONEVent:SEARCH:ACTION:SRQ:STATE? might return :ACTONEVent:SEARCH:ACTION:SRQ:STATE 0, indicating the generate an SRQ event when any search event is found feature is disabled.
:ACTONEVent:SEARCH:ACTION:STOPACQ:STATEset / query
Stops acquisitions when a search event is found.
:ACTONEVent:TRIGger:ACTION:SAVEIMAGe:STATEset / query
Saves a screen capture on a trigger event from a single sequence or sequence of N acquisition. Each acquisition in the sequence of N performs a save operation; this command is an alias for the older SAVe:IMAGe command.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Enables or disables the save screen capture on a trigger event feature. |
ACTONEVent:TRIGger:ACTION:SAVEIMAGe:STATE ON ACTONEVent:TRIGger:ACTION:SAVEIMAGe:STATE? might return :ACTONEVent:TRIGger:ACTION:SAVEIMAGe:STATE OFF
Enables or disables saving the source waveform(s) on a trigger event. Any nonzero value turns the feature on; 0 turns it off.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Selects whether the save source waveform on trigger event feature is enabled or disabled. |
enum - Returns the current save source waveform on trigger event state.
ACTONEVent:TRIGger:ACTION:SAVEWAVEform:STATE ON ACTONEVent:TRIGger:ACTION:SAVEWAVEform:STATE?
:ACTONEVent:TRIGger:ACTION:SRQ:STATEset / query
Generates an SRQ event when a trigger event occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables generating an SRQ event when a trigger event occurs. |
| value | integer | - | Numeric value that enables or disables generating an SRQ event when a trigger event occurs; zero disables the feature and all other numbers enable it. |
enum - Returns the current SRQ-event state.
ACTONEVent:TRIGger:ACTION:SRQ:STATE 1 ACTONEVent:TRIGger:ACTION:SRQ:STATE?
:ACTONEVent:TRIGger:ACTION:STOPACQ:STATEset / query
Stops acquisitions on a trigger event from a single sequence or a sequence of N acquisitions. Each acquisition in the sequence performs a save operation.
:ACTONEVENT:ACTION:AUXOUT:STATEset / query
Sets the AUX output action state for an event action setup. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables the AUXOUT action state. |
:ACTONEVENT:ACTION:EMAIL:SETUP:TOADDRESSset / query
Sets the destination email address used by the ACTONEVENT email action. The default value is "TestString".
| Name | Type | Values | Description |
|---|---|---|---|
| toaddress | string | - | Email recipient address. |
:ACTONEVENT:ACTION:EMAIL:STATEset / query
Sets the enable state for the e-mail action in the ACTONEVENT action group.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables the e-mail action. |
:ACTONEVENT:ACTION:PRINT:STATEset / query
Sets the print action state for an event action. The default value is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables the print action state. |
:ACTONEVENT:ACTION:SAVEIMAGE:STATEset / query
Sets the enable state for saving an image as the action taken on an event. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables the save-image action state. |
:ACTONEVENT:ACTION:SAVEWFM:STATEset / query
Sets the state of the Save Waveform action for Act-On-Event. The default value is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Enables or disables the Save Waveform action. |
:ACTONEVENT:ACTION:SRQ:STATEset / query
Sets whether the selected action event generates an SRQ. The factory default is 0 (off).
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables SRQ generation for the action event. |
:ACTONEVENT:ACTION:STOPACQ:STATEset / query
Sets whether acquisition is stopped when the selected action-on-event is triggered. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | - | Enables or disables stopping acquisition on the event. |
:ACTONEVENT:ACTION:VISUAL:STATEset / query
Sets the state of the visual action for an action-on-event configuration. The default value is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Enables or disables the visual action state. |
:ACTONEVENT:EVENTTYPEset / query
Selects the event type for ACTONEVENT. The factory default is NONE.
:ACTONEVENT:NUMACQSset / query
Sets the default number of acquisitions for the ACTONEVENT state. The factory default value is 1.
:ACTONEVENT:REPEATCOUNTset / query
Sets or shows the repeat count used for ACT ON EVENT operations.
:AFG:AMPLitudeset / query
Sets or queries the AFG amplitude in volts peak-to-peak. Requires option AFG.
| Name | Type | Values | Description |
|---|---|---|---|
| amplitude | real | V | AFG amplitude, peak to peak, in volts. |
real (V) - Returns the AFG amplitude in volts peak-to-peak.
AFG:AMPLITUDE 1.0 AFG:AMPLITUDE? might return :AFG:AMPLITUDE 3.0000
:AFG:ARBitrary:SOUrceset / query
Sets or queries the source name for the Arbitrary Waveform. Supported sources are waveform files (.wfm) or text files (.csv).
:AFG:BURSt:CCOUntset / query
Sets or returns the cycle count for AFG burst mode.
| Name | Type | Values | Description |
|---|---|---|---|
| cycle count | integer | - | The burst cycle count. |
integer - Returns the current cycle count for AFG burst mode.
AFG:BURSt:CCOUnt 1000 AFG:BURSt:CCOUnt?
:AFG:BURSt:TRIGgerset / query
Triggers a burst on AFG output. This command has no query form.
:AFG:FREQuencyset / query
Sets or queries the AFG frequency in Hz.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | Hz | AFG frequency to set. |
real (Hz) - Returns the AFG frequency in Hz.
AFG:FREQUENCY 100.0E3 sets the AFG frequency to 100 kHz. AFG:FREQUENCY? might return :AFG:FREQUENCY 312.5000E+3, indicating the frequency is set to 312.5 kHz.
:AFG:FUNCtionset / query
Sets which AFG function to execute, or queries the current function. The DC function is controlled by AFG:OFFSet.
enum - Returns the current AFG function.
:AFG:HIGHLevelset / query
Sets or queries the high level value of the output waveform for the arbitrary function generator, in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | AFG high level value. |
real (V) - Returns the AFG high level value in volts.
AFG:HIGHLEVEL 1.0 sets the AFG high level value to 1.0 volts. AFG:HIGHLEVEL? might return :AFG:HIGHLEVEL 1.5000 indicating the high level is set to 1.5 Volts.
:AFG:LOWLevelset / query
Sets the low level value of the output waveform, in volts, when using the arbitrary function generator feature.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | Low level value of the output waveform. |
:AFG:NOISEAdd:PERCentset / query
Sets or queries the AFG additive noise level as a percentage. Minimum is 0.0%, maximum is 100.0%, with 1.0% increment.
| Name | Type | Values | Description |
|---|---|---|---|
| percent | real | 0.0 - 100.0 | AFG additive noise level as a percentage. |
real (%) - Returns the AFG additive noise level as a percentage.
AFG:NOISEADD:PERCENT 50 sets the AFG additive noise level to 50 percent. AFG:NOISEADD:PERCENT? might return :AFG:NOISEADD:PERCENT 0 indicating that no noise is added.
:AFG:NOISEAdd:STATEset / query
Sets or queries the AFG additive noise state.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | Turns the AFG additive noise state on or off. |
:AFG:OFFSetset / query
Sets or queries the AFG offset value in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | real | V | AFG offset value in volts. |
real (V) - Returns the AFG offset value in volts.
AFG:OFFSET 1.0 sets the AFG offset to 1.0 volts. AFG:OFFSET? might return AFG:OFFSET 0.0E+0 indicating there is no offset.
:AFG:OUTPut:LOAd:IMPEDanceset / query
Sets or queries the AFG output load impedance.
enum - Returns the current AFG output load impedance setting.
AFG:OUTP:LOA:IMPED FIF AFG:OUTPUT:LOAD:IMPEDANCE?
:AFG:OUTPut:MODeset / query
Sets or returns the AFG output mode. Requires the AFG option.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | CONTinuous | BURSt | AFG output mode to set. |
enum - Returns the present AFG output mode.
AFG:OUTPut:MODe BURSt AFG:OUTPut:MODe?
:AFG:OUTPut:MODe?query
Sets or returns the AFG output mode. Requires the AFG option.
enum - Returns the current AFG output mode.
AFG:OUTPut:MODe BURSt AFG:OUTPut:MODe?
:AFG:OUTPut:STATEset / query
Sets or queries the AFG output state. The state can be turned on or off using numeric or keyword values.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | AFG output state to set. |
:AFG:OUTPut:STATE?query
Sets or queries the AFG output state.
enum - Returns the present AFG output state.
:AFG:PERIodset / query
Sets or queries the period of the AFG waveform, in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| period | real | s | AFG waveform period value in seconds. |
real - The query response is returned in high precision NR3 format (up to 12 digits with more than 4 trailing 0 digits after the decimal point is omitted).
AFG:PERIOD 1 sets the AFG period value to 1 second. AFG:PERIOD? might return :AFG:PERIOD 3.2000E-6, indicating the AFG period is set to 3.2 μs.
:AFG:PERIod?query
Queries the AFG waveform period in seconds. The response is returned in high-precision NR3 format.
string (s) - The AFG period value in seconds, returned in high-precision NR3 format.
AFG:PERIOD? might return :AFG:PERIOD 3.2000E-6, indicating the AFG period is set to 3.2 μs.
:AFG:PULse:WIDthset / query
Sets or queries the AFG pulse width in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | The AFG pulse width value to set, in seconds. |
AFG:PULSE:WIDTH 100.0E-6 AFG:PULSE:WIDTH? might return :AFG:PULSE:WIDTH 1.0000E-6, indicating the pulse width is set to 1 μs.
:AFG:PULse:WIDth?query
Sets or queries the AFG pulse width, in seconds.
real (s) - Returns the AFG pulse width value in seconds.
:AFG:RAMP:SYMmetryset / query
Sets or queries the AFG ramp symmetry in percent. Requires the AFG option.
| Name | Type | Values | Description |
|---|---|---|---|
| symmetry | real | 0.0% - 100.0% | AFG ramp symmetry as a percentage. |
real (%) - Returns the AFG ramp symmetry setting in percent.
AFG:RAMP:SYMMETRY 50.0 AFG:RAMP:SYMMETRY?
:AFG:RAMP:SYMmetry?query
Sets or queries the AFG ramp symmetry in percent. Minimum is 0.0%, maximum is 100.0% and increment is 0.10%.
real (%) - Returns the AFG ramp symmetry as a percentage.
:AFG:SQUare:DUtyset / query
Sets or queries the AFG duty cycle in percent. The minimum is 10.0%, maximum is 90.0% and increment is 0.10%.
| Name | Type | Values | Description |
|---|---|---|---|
| duty cycle | real | 10.0% - 90.0% | Floating point value that represents the AFG duty cycle as a percentage. |
real (%) - The AFG duty cycle in percent.
AFG:SQUARE:DUTY 50.0 AFG:SQUARE:DUTY?
:AFG:SQUare:DUty?query
Sets or queries the AFG duty cycle in percent. The minimum is 10.0%, maximum is 90.0%, and increment is 0.10%.
real (%) - Returns the AFG duty cycle as a percentage.
AFG:SQUARE:DUTY 50.0 AFG:SQUARE:DUTY? might return :AFG:SQUARE:DUTY 50.0000, indicating the duty cycle is set to 50%.
:AFG:AMPLITUDEset / query
Sets the AFG output amplitude. The factory default is 500.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| amplitude | real | V | Output amplitude. |
:AFG:ARBITRARY:EMEM:POINTS:ENCDGset / query
Sets the encoding used for AFG arbitrary waveform memory points. The factory default is ASCII.
:AFG:FREQUENCYset / query
Sets the AFG frequency to the specified value. The factory default is 100.0E+3.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | Hz | Sets the AFG output frequency. |
:AFG:FUNCTIONset / query
Sets the arbitrary function generator output waveform function. The factory default is SINE.
:AFG:HIGHLEVELset / query
Sets the AFG high output level to the default factory value shown in the appendix. No syntax details are provided on this page beyond the stored default.
:AFG:LEVELPRESETset / query
Sets the AFG level preset to the factory default user preset value shown in the defaults table.
:AFG:LOWLEVELset / query
Sets the AFG low output level to its factory default value. The factory default shown is -250.0000E-3.
:AFG:NOISEADD:PERCENTset / query
Sets the percent of noise added to the AFG output. Factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| percent | real | 0.0E+0 | Noise add percentage. |
:AFG:NOISEADD:STATEset / query
Sets the noise add state for the AFG. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | Noise add state. |
:AFG:OFFSETset / query
Sets the AFG output offset. Factory default is 0.0E+0.
:AFG:OUTPUT:LOAD:IMPEDANCEset / query
Sets the output load impedance for the AFG output. The factory default is HIGHZ.
| Name | Type | Values | Description |
|---|---|---|---|
| impedance | enum | HIGHZ | Output load impedance setting. |
:AFG:PERIODset / query
Sets the AFG period to the default factory value shown in the appendix.
:AFG:PHASEset / query
Sets the AFG phase. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| phase | real | - | Phase value. |
:AFG:PULSE:WIDTHset / query
Sets the pulse width for the AFG waveform generator. The factory default value is 1.0E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Pulse width. |
:AFG:RAMP:SYMMETRYset / query
Sets the symmetry of the AFG ramp waveform. The factory default is 50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| symmetry | real | 0 - 100 | Ramp symmetry setting. |
:AFG:SQUARE:DUTYset / query
Sets the square-wave duty cycle for the AFG. The factory default is 50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| duty | real | - | Square-wave duty cycle. |
:ALIasset / query
Turns Alias mode on or off, or enables it with a numeric value. When Alias mode is on, received aliases are substituted with the specified command sequence and executed.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Turns Alias expansion off or on. |
| value | integer | 0 | A value of 0 disables Alias mode; any other value enables Alias mode. |
ALIAS ON ALIAS?
:ALIas:CATalog?query
Returns a list of the currently defined alias labels, separated by commas. If no aliases are defined, the query returns an empty string.
string - A comma-separated list of the currently defined alias labels, or an empty string if no aliases are defined.
ALIAS:CATALOG? might return the string :ALIAS:CATALOG "SETUP1","TESTMENU1","DEFAULT" showing that there are three aliases named SETUP1, TESTMENU1, and DEFAULT.
:ALIas:DEFineset / query
Assigns a sequence of program messages to an alias label, which is then substituted when the alias is received as a command or query if alias state is on. The query form returns the definitions of a selected alias.
| Name | Type | Values | Description |
|---|---|---|---|
| <QString> | string | - | Alias definition string containing the program message sequence. |
:ALIas:DEFine?query
Assigns a sequence of program messages to an alias label. The query form returns the definitions of a selected alias, provided alias expansion is enabled.
string - Returns the definitions of a selected alias.
:ALIas?query
Returns the current Alias mode state. The example shows the query may return :ALIAS:STATE 1 when aliasing is on.
enum - Returns the alias feature state.
:ALIas:DELEteset / query
Removes a specified alias. It is identical to `ALIas:DELEte:NAMe`; an error is generated if the alias does not exist.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Name of the alias to be removed. |
ALIAS:DELETE "SETUP1" deletes the alias named SETUP1.
:ALIas:DELEte:ALLset / query
Deletes all existing aliases.
:ALIas:DELEte:NAMeset / query
Removes a specified alias. An error message is generated if the named alias does not exist; this command is identical to ALIas:DELEte.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Name of the alias to remove. |
ALIAS:DELETE:NAME "STARTUP" deletes the alias named STARTUP.
:ALIas:STATEset / query
Turns aliases on or off. The query form returns the current alias state.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Turns alias expansion off or on; any nonzero <NR1> value turns it on. |
enum - Returns the current alias state.
ALIAS:STATE OFF ALIAS:STATE?
:ALIas:STATE?query
Turns aliases on or off; the query form returns the current alias state. It is identical to the ALIas command.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Turns alias expansion off or on. |
enum - Returns the state of the aliases as a command string, such as :ALIAS:STATE ON, indicating whether alias expansion is currently turned on.
ALIAS:STATE OFF turns off the alias feature. ALIAS:STATE? might return :ALIAS:STATE ON, indicating that alias expansion is currently turned on.
:ALIAS:STATEset / query
Sets or queries the alias state default. The factory default value shown is 0.
:ALLEv?query
Returns the last error message from the status and error queue. The example shows it may return an error code and text string.
string - Returns the last error message from the status and error queue.
ALLEV? turns off the alias feature. ALLEV? might return :ALLEV 2225,"Measurement error, No waveform to measure; "420,"Query UNTERMINATED;".
:ALLEV?query
Reads all event numbers along with a description of each event from the Event Queue. Reading an event removes it from the queue.
string - Returns all event numbers along with a text description of each event.
:APPLication:ACTivateset / query
For legacy TekExpress applications, starts the application specified in the string. The available applications depend on the oscilloscope model and installed options.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The name of the application to start; enter it exactly as it appears in the oscilloscope Applications menu. |
APPLICATION:ACTIVATE "TekExpress Ethernet" starts the TekExpress Ethernet application.
:APPLICATION:TYPEset / query
Sets the application type factory default. The documented default value is POWER.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | POWER | Application type. |
:AUTOSAVEPITIMEOUTset / query
Sets or queries the idle time from the programmable interface before auto-save occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| timeout | integer | - | The timeout time. |
integer - Returns the timeout value in the programmable interface idle time before auto-save occurs.
AUTOSAVEPITIMEOUT 100000 sets the timeout to 100 seconds. AUTOSAVEPITIMEOUT? might return :AUTOSAVEPITIMEOUT 180000 indicating the time out value is 180 seconds.
:AUTOSAVEPITIMEOUT?query
Sets or queries the idle time from the programmable interface before auto-save occurs.
integer - Returns the timeout value in milliseconds.
:AUTOSAVEUITIMEOUTset / query
Sets or queries the idle time from the user interface before auto-save occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| timeout | integer | - | The timeout time. |
integer - Returns the auto-save timeout value.
AUTOSAVEUITIMEOUT 4000 AUTOSAVEUITIMEOUT?
:AUTOSAVEUITIMEOUT?query
Sets or queries the idle time from the user interface before auto-save occurs.
integer (ms) - The current timeout value in milliseconds.
AUTOSAVEUITIMEOUT 4000 AUTOSAVEUITIMEOUT?
:AUTOSetset / query
Sets the instrument to automatically acquire and display the selected waveform by adjusting the vertical, horizontal, and trigger controls. This is the no-query form of Autoset.
| Name | Type | Values | Description |
|---|---|---|---|
| EXECute | enum | - | Executes autoset on the displayed waveform; equivalent to pressing the front-panel Autoset button. |
AUTOSET EXECute autosets the displayed waveform.
:AUTOSet:ACQuisition:ENAbleset / query
Sets or queries the Autoset acquisition setting adjustment. Settings affected may include acquisition mode and FastAcq mode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ON | 1 | OFF | 0 | Enables or disables the Autoset acquisition setting adjustment. |
enum - Returns the Autoset acquisition setting adjustment state.
Sets or queries the Autoset acquisition setting adjustment. Settings affected may include acquisition mode and FastAcq mode.
enum - Returns the Autoset acquisition setting adjustment state.
:AUTOSet:ENAbleset / query
Sets or queries the Autoset enable/disable feature. It enables or disables the Autoset feature for the instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Enables or disables Autoset. |
enum - Returns the current Autoset enable state.
AUTOSet:ENAble ON AUTOSet:ENAble?
:AUTOSet:ENAble?query
Sets or queries the Autoset enable/disable feature. When enabled, Autoset can be used; when disabled, it cannot.
enum - Returns the Autoset enable state.
AUTOSet:ENAble ON AUTOSet:ENAble?
:AUTOSet:HORizontal:ENAbleset / query
Sets or queries Autoset's adjustment of horizontal settings. Settings affected may include horizontal scale, horizontal position, and horizontal delay mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Enables or disables Autoset's adjustment of horizontal settings. |
enum - Returns the current Autoset horizontal-adjustment state.
Sets or queries Autoset's adjustment of horizontal settings, including horizontal scale, horizontal position, and horizontal delay mode.
enum - Returns whether Autoset's adjustment of horizontal settings is enabled or disabled.
:AUTOSet:TRIGger:ENAbleset / query
Sets or queries Autoset's adjustment of trigger settings, including trigger level, source, and coupling. Use it to enable or disable Autoset changes to trigger settings.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Enables or disables Autoset trigger-setting adjustments. |
enum - Returns the current Autoset trigger-setting adjustment state.
AUTOSet:TRIGger:ENAble OFF AUTOSet:TRIGger:ENAble?
Sets or queries Autoset's adjustment of trigger settings, including trigger level, trigger source, and trigger coupling.
enum - Returns whether Autoset's adjustment of trigger settings is enabled or disabled.
AUTOSet:TRIGger:ENAble OFF AUTOSet:TRIGger:ENAble?
:AUTOSet:VERTical:ENAbleset / query
Sets or queries whether Autoset is allowed to adjust vertical settings such as vertical scale, position, and offset.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Enables or disables Autoset's adjustment of vertical settings. |
enum - Returns whether Autoset is adjusting vertical settings.
AUTOSet:VERTical:ENAble OFF
Sets or queries Autoset's adjustment of vertical settings, including vertical scale, position, and offset. The command enables or disables whether Autoset may change vertical settings.
enum - Returns whether Autoset is enabled to change vertical settings.
:AUTOSet:VERTical:OPTIMizeset / query
Sets or queries which vertical settings Autoset will optimize when the display mode is set to Overlay mode. In Overlay mode, RESOlution maximizes ADC range use, while VISIBility separates waveforms visually at the expense of vertical resolution and measurement accuracy.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RESOlution | VISIBility | Selects which vertical optimization Autoset uses in Overlay mode. |
Sets or queries which vertical settings Autoset will optimize when the display mode is set to Overlay mode. The choice is between maximizing resolution/measurement accuracy or separating waveforms visually.
enum - Returns which vertical optimization mode Autoset is using.
:AUTOsetset / query
Starts an automatic setup operation when executed.
| Name | Type | Values | Description |
|---|---|---|---|
| execute | enum | EXECute | Execute the automatic setup operation. |
:AUXout:EDGEset / query
Sets or queries the direction in which the Auxiliary Output signal will transition when a trigger occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISing | FALling | Selects whether the Auxiliary Output transitions on the rising or falling edge. |
enum - Returns the current Auxiliary Output edge polarity.
AUXOUT:EDGE RISING AUXOUT:EDGE? might return :AUXOUT:EDGE FALLING, indicating that the polarity is set to falling edge.
:AUXout:EDGE?query
Sets or queries the direction in which the Auxiliary Output signal will transition when a trigger occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | RISing | FALling | Selects whether the Auxiliary Output transitions on the rising or falling edge. |
enum - Returns the current Auxiliary Output edge direction.
AUXOUT:EDGE RISING AUXOUT:EDGE? might return :AUXOUT:EDGE FALLING, indicating that the polarity is set to falling edge.
:AUXout:SOUrceset / query
Sets or queries the source at the Auxiliary Output BNC connection.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | ATRIGger | REFOUT | AFG | Source for the Auxiliary Output BNC connection. |
:AUXout:SOUrce?query
Sets or queries the source at the Auxiliary Output BNC connection.
enum - The current Auxiliary Output source.
:AUXOUT:EDGEset / query
Sets the AUX OUT edge polarity used for the auxiliary output signal. The factory default is RISING.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISING | Edge polarity for the auxiliary output signal. |
:AUXOUT:SOURCEset / query
Sets the source for the AUX OUT signal. The factory default is ATRIGGER.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | ATRIGGER | AUX OUT source selection. |
:BUSTABle:ADDNewset / query
Adds the specified bus table. The argument is of the form "TABLE<NR1>", where <NR1> is greater than or equal to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| table | string | - | The bus table to add, specified as TABLE<NR1>. |
:BUSTABle:DELeteset / query
Deletes the specified bus table. The argument is a quoted string naming the bus table to delete.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that is the name of the bus table to delete. |
BUSTABLE:DELETE "Table1" deletes bus table Table1.
:BUSTABle:LIST?query
Lists all currently defined bus tables.
string - Returns a list of all currently defined bus tables.
BUSTABLE:LIST? might return BUSTABLE:LIST TABLE1 indicating TABLE1 is currently the only defined bus table.
*CAL?query
Starts signal path calibration (SPC) and returns the status upon completion.
integer - 0 indicates SPC passed; -1 indicates SPC failed or did not complete.
*CAL? starts the signal path calibration and returns the status upon completion.
*CLSset / query
Clears the instrument status data structures.
*CLS clears the instrument status data structures.
*DDTset / query
Defines a command or list of commands to be executed when the instrument receives a *TRG command. It is a special alias used by *TRG.
*IDN?query
Returns the instrument identification code.
string - The instrument identification string, including manufacturer, model, serial number, codes and formats number, and firmware version number.
*IDN? might return TEKTRONIX,MSO54,C100123,CF:91.1CT FV:1.2.0.2886, indicating the instrument model number, serial number, codes and formats number, and firmware version number.
*LRN?query
Returns the commands that list the instrument settings, allowing you to record or "learn" the current instrument settings. It is identical to the SET? command.
string - Returns the commands that list the instrument settings so you can restore the instrument to the state it was in when the query was made.
*OPT?query
Returns a comma-separated list of installed options as an arbitrary ASCII string with no quotes. If no options are found, NONE is returned.
string - A comma-separated list of installed options in the form <optionCode>:<optionDescription>..., or NONE if no options are found.
*OPT? *OPT? response (with each option listed on a separate line for clarity): 5-BW-1000 – 1 GHz , 5-DJA – Advanced Jitter and Eye Analysis– NODE.
*PUDset / query
Sets or queries a string of Protected User Data. The data is protected by the PASSWord command and can only be modified after entering the correct password; querying does not require the password.
| Name | Type | Values | Description |
|---|---|---|---|
| value | block | - | Block or string containing up to 100 characters. |
block - Returns the protected user data string.
*PUD #229This instrument belongs to me *PUD? might return #221PROPERTY OF COMPANY X.
*TRGset / query
Performs a group execute trigger on commands defined by *DDT.
*TRG immediately executes all commands that have been defined by *DDT.
*TST?query
Tests the interface self-test and returns 0.
integer - Always returns 0.
*TST? always returns 0.
*ESR?query
Reads the Standard Event Status Register (SESR). Reading the register clears its bits so it can accumulate new events.
integer - Returns the SESR register value.
*STB?query
Reads the Status Byte Register (SBR). Bit 6 is RQS when obtained by serial poll, and MSS when obtained by *STB?; reading the SBR does not clear the bits.
integer - Returns the contents of the Status Byte Register (SBR).
*ESEset / query
Sets the bits in the Event Status Enable Register (ESER). Use *ESE? to read the register.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 255 | Bit pattern to load into the ESER. |
*ESE?query
Sets the bits in the Event Status Enable Register (ESER), which controls which types of events are summarized by the Event Status Bit (ESB) in the SBR. Use *ESE? to read the register.
| Name | Type | Values | Description |
|---|---|---|---|
| bits | integer | 0 - 255 | Bits to set in the ESER. |
integer - Returns the ESER contents.
*PSCset / query
Controls the Enable Registers contents at power-on. *PSC 1 sets DESER to 255, ESER to 0, and SRER to 0; *PSC 0 lets the Enable Registers retain their values in nonvolatile memory through a power cycle.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Selects the power-on behavior of the Enable Registers. |
*SREset / query
Sets the Service Request Enable Register (SRER). The register controls which bits in the status byte register generate a Service Request and are summarized by the Master Status Summary bit.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 255 | Bits to set in the SRER. |
*SRE?query
Reads the Service Request Enable Register (SRER). The register controls which bits in the Status Byte Register generate a Service Request and contribute to the Master Status Summary bit.
integer - The current SRER value.
*OPCset / query
Sets bit 0 of the Standard Events Status Register when all pending operations that generate an OPC message have finished execution. The query form returns 1 when all operations are complete, or if a device clear is received.
*OPC?query
Returns 1 only when all operations have completed, or a device clear is received.
integer - Returns 1 only when all operations have completed, or a device clear is received.
*WAIset / query
Prevents the instrument from executing further commands or queries until all pending commands that generate an OPC message are complete.
*RSTset / query
Resets the instrument. Wait for the reset to complete before sending further commands.
*RST
:CALibrate?query
Returns the status of signal path calibration. When running SPC through the remote interface, the calibration status cannot be obtained until after the SPC completes.
integer - Returns the status of signal path calibration; calibration status is not available until the SPC completes.
Returns the current status of the signal path calibration.
enum - Returns the current signal path calibration status, such as PASS.
Query-only command that returns the current status of the power-up calibration.
enum - Returns 0 if the power-up calibration failed, or 1 if it passed.
CALIBRATE:PWRUPSTATUS? might return 0, indicating that the power-up calibration failed.
:CALibrate:FACtoryset / query
Starts the factory calibration operation. It is one of the instrument operations that can generate an Operation Complete (OPC) event.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | STARt | CONTinue | PREVious | Factory calibration action to perform. |
CALibrate:FACtory STARt CALibrate:FACtory CONTinue CALibrate:FACtory PREVious
:CALibrate:INTERNalset / query
Starts the internal calibration operation. This command is one of the instrument operations that can generate Operation Complete (OPC).
:CALibrate:INTERNal:STARtset / query
Starts internal calibration. Only a subset of instrument operations support the Operation Complete function (OPC), and this command is one of them.
:CALLOUTS:ADDNewset / query
Adds the specified callout. A Note is the default callout type.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the callout; the argument is of the form "CALLOUT<NR1>", where <NR1> is a number value ≥ 1. |
CALLOUTS:ADDNew "CALLOUT1" creates a new callout named CALLOUT1.
:CALLOUTS:CALLOUT<x>:BOOKMark:SOURCEset / query
Sets or queries the source of the Bookmark callout type.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | CH2 | CH3 | CH4 | Bookmark callout source channel. |
enum - Returns the bookmark callout source as a channel identifier.
CALLOUTS:CALLOUT1:BOOKMark:SOURCE CH2 CALLOUTS:CALLOUT1:BOOKMark:SOURCE? might return "CH1"
Sets or queries the source of the Bookmark callout type.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | CH2 | CH3 | CH4 | Specifies the bookmark callout source channel. |
enum - Returns the bookmark callout source channel.
CALLOUTS:CALLOUT1:BOOKMark:SOURCE CH2 CALLOUTS:CALLOUT1:BOOKMark:SOURCE? might return "CH1", indicating that the bookmark callout source is Ch1.
:CALLOUTS:CALLOUT<x>:BOOKMark:XPOSset / query
Sets or queries the X-position of the Bookmark callout type. The value specifies the location of the bookmark linked to the source waveform on the X-axis.
| Name | Type | Values | Description |
|---|---|---|---|
| xpos | real | - | Location of the bookmark linked to the source waveform in X-axis. |
Queries the bookmark callout X-position for the specified callout.
string - Returns the bookmark callout X-position, shown as a value with units.
:CALLOUTS:CALLOUT<x>:COLORset / query
Sets or queries the text color of the callout.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the callout text color using hexadecimal color values. |
string - Returns the callout text color as a hexadecimal color value.
CALLOUTS:CALLOUT1:COLOR "#FF0000" CALLOUTS:CALLOUT1:COLOR?
:CALLOUTS:CALLOUT<x>:DISPLAYPOSition:Xset / query
Sets or queries the horizontal display position of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Callout horizontal display position. |
real - Returns the callout horizontal display position.
CALLOUTS:CALLOUT1:DISPLAYPOSition:X 50 sets the callout text in the center on the horizontal axis of the display on the scopeapp. CALLOUTS:CALLOUT1:DISPLAYPOSition:X? might return "50", indicating the callout text is in the center on the horizontal axis of the display on the scopeapp.
Sets or queries the horizontal display position of the callout text.
real - Returns the callout horizontal display position.
CALLOUTS:CALLOUT1:DISPLAYPOSition:X 50 sets the callout text in the center on the horizontal axis of the display on the scopeapp. CALLOUTS:CALLOUT1:DISPLAYPOSition:X? might return "50", indicating the callout text is in the center on the horizontal axis of the display on the scopeapp.
:CALLOUTS:CALLOUT<x>:DISPLAYPOSition:Yset / query
Sets or queries the vertical display position of a callout on the display. <NR1> specifies the callout vertical display position.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Vertical display position of the callout text on the display. |
real - Returns the current callout vertical display position.
CALLOUTS:CALLOUT1:DISPLAYPOSition:Y 50 CALLOUTS:CALLOUT1:DISPLAYPOSition:Y?
Sets or queries the vertical display position of the callout text. The value is specified as an NR1 number.
| Name | Type | Values | Description |
|---|---|---|---|
| y | real | - | Vertical display position of the callout text. |
real - Returns the callout vertical display position.
CALLOUTS:CALLOUT1:DISPLAYPOSition:Y 50 CALLOUTS:CALLOUT1:DISPLAYPOSition:Y?
:CALLOUTS:CALLOUT<x>:FONT:BOLDset / query
Sets or queries the bold state of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Bold state of the callout font. |
enum - Returns the bold state of the callout text.
CALLOUTS:CALLOUT1:FONT:BOLD 1 sets the font weight of callout1 to bold. CALLOUTS:CALLOUT1:FONT:BOLD? might return "0", indicating the font weight is set to normal.
Sets or queries the bold state of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Callout font weight, where 1 is bold and 0 is normal. |
enum - Returns the bold state of the callout text.
CALLOUTS:CALLOUT1:FONT:BOLD 1 CALLOUTS:CALLOUT1:FONT:BOLD?
:CALLOUTS:CALLOUT<x>:FONT:ITALICset / query
Sets or queries the italic state of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Specifies whether the callout font style is italic. |
CALLOUTS:CALLOUT1:FONT:ITALIC 1 sets the font style of callout1 to italic.
Queries whether the callout text font is italic. It may return "0", indicating the font style is not italic.
enum - Returns whether the font style is italic.
:CALLOUTS:CALLOUT<x>:FONT:SIZEset / query
Sets or queries the font size of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | points | Font size of the callout text in points. |
integer (points) - Returns the callout font size in points.
CALLOUTS:CALLOUT1:FONT:SIZE 11 CALLOUTS:CALLOUT1:FONT:SIZE? might return "14", indicating the font size is 14 points.
Sets or queries the font size of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | points | Font size in points. |
integer (points) - Returns the font size in points.
CALLOUTS:CALLOUT1:FONT:SIZE 11 CALLOUTS:CALLOUT1:FONT:SIZE?
:CALLOUTS:CALLOUT<x>:FONT:TYPEset / query
Sets or queries the type of font used for the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Specifies the type of font for the callout text. |
string - Returns the current font type of the callout text.
CALLOUTS:CALLOUT1:FONT:TYPE "Serif" sets the font type of callout1 to serif. CALLOUTS:CALLOUT1:FONT:TYPE? might return "Monospace", indicating the font type is monospace.
Sets or queries the font type of the callout text.
string - Returns the current callout font type.
CALLOUTS:CALLOUT1:FONT:TYPE "Serif" CALLOUTS:CALLOUT1:FONT:TYPE? might return "Monospace"
:CALLOUTS:CALLOUT<x>:FONT:UNDERLineset / query
Sets or queries the underline state of the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | Underline state. |
enum - Returns the underline state as 1 or 0.
Queries whether the specified callout text is underlined. Returns 1 if the callout text is underlined and 0 if it is not.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Callout index. |
integer - Returns 1 when the callout text is underlined and 0 when it is not.
CALLOUTS:CALLOUT1:FONT:UNDERLine? might return "0", indicating the callout text is not underlined.
:CALLOUTS:CALLOUT<x>:TEXTset / query
Sets or queries the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the callout text. |
string - Returns the callout text for the specified callout.
CALLOUTS:CALLOUT1:TEXT "Review measurements" CALLOUTS:CALLOUT1:TEXT?
Sets or queries the callout text.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the callout text. |
string - Returns the callout text.
CALLOUTS:CALLOUT1:TEXT "Review measurements" sets the text for callout 1 as "Review measurements". CALLOUTS:CALLOUT1:TEXT? might return "Review measurements", indicating the text for callout 1 is "Review measurements".
:CALLOUTS:CALLOUT<x>:TYPEset / query
Sets or queries the type of the callout.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | NOTE | ARROW | RECTANGLE | BOOKMARK | Callout type to assign. |
enum - Returns the current callout type.
CALLOUTS:CALLOUT1:TYPE NOTE sets the callout type of callout1 to note. CALLOUTS:CALLOUT1:TYPE? might return "ARROW", indicating the callout type is arrow.
Sets or queries the type of the specified callout.
enum - Returns the callout type.
CALLOUTS:CALLOUT1:TYPE NOTE CALLOUTS:CALLOUT1:TYPE? might return "ARROW", indicating the callout type is arrow.
:CALLOUTS:DELeteset / query
Deletes the specified callout. A Note is the default callout type.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the callout, in the form "CALLOUT<NR1>", where <NR1> is a number value ≥ 1. |
CALLOUTS:DELete "CALLOUT1" deletes the callout named CALLOUT1.
:CH<x>_DALL:LABel:COLorset / query
Sets or queries the color of the specified digital group label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | 1 | Channel number x. |
| color | string | - | Color of the digital group label; an empty string returns the label color to the default color. |
string - Returns the color of the specified digital group label.
CH1_DALL:LABel:COLor "#FF0000" sets the font color to red. CH1_DALL:LABel:COLor? might return CH1_DALL:LABEL:COLOR "#FFFF00" indicating the font color is yellow.
Sets or queries the color of the specified digital group label. The channel is specified by x, and sending an empty string returns the label to its default color.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | 1 | Channel number x. |
| color | string | - | Color of the digital group label. |
string - Returns the color of the specified digital group label.
CH1_DALL:LABel:COLor "#FF0000" sets the font color to red. CH1_DALL:LABel:COLor? might return CH1_DALL:LABEL:COLOR "#FFFF00" indicating the font color is yellow.
:CH<x>_DALL:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified digital group label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns bold font on or off. |
enum - Returns the bold state of the specified digital group label.
Sets or queries the bold state of the specified digital group label for channel x. OFF turns off bold font.
enum - Returns the bold state of the specified digital group label.
:CH<x>_DALL:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| state | enum | ON | OFF | <NR1> | Turns italic font on or off; <NR1> = 0 turns it off and any other value turns it on. |
CH1_DALL:LABel:FONT:ITALic 1 turns on italic font. CH1_DALL:LABel:FONT:ITALic? might return CH1_DALL:LABEL:FONT:ITALIC 0 indicating the font is not italic.
Sets or queries the italic state of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| state | enum | ON | OFF | Turns italic font on or off. |
| value | integer | 0 | <NR1> value where 0 turns off italic font; any other value turns it on. |
integer - Returns the italic state of the specified digital group, with 0 indicating off and any other value indicating on.
CH1_DALL:LABel:FONT:ITALic 1 turns on italic font. CH1_DALL:LABel:FONT:ITALic? might return CH1_DALL:LABEL:FONT:ITALIC 0 indicating the font is not italic.
:CH<x>_DALL:LABel:FONT:SIZEset / query
Sets or queries the font size of the specified digital group label. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| size | integer | points | Font size. |
integer (points) - Returns the current font size in points.
CH1_DALL:LABEL:FONT:SIZE 16 sets the font size to 16 points. CH1_DALL:LABEL:FONT:SIZE? might return CH1_DALL:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
Sets or queries the font size of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number. |
| size | integer | - | Font size. |
integer - Returns the font size.
CH1_DALL:LABel:FONT:SIZE 16 sets the font size to 16 points. CH1_DALL:LABel:FONT:SIZE? might return CH1_DALL:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
:CH<x>_DALL:LABel:FONT:TYPEset / query
Sets or queries the font type of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Font type. |
string - Returns the current font type of the specified digital group.
CH1_DALL:LABel:FONT:TYPE "Monospace" sets the font to a monospace font. CH1_DALL:LABel:FONT:TYPE? might return CH1_DALL:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
Sets or queries the font type of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| font type | string | - | Font type to apply to the specified digital group. |
string - Returns the current font type of the specified digital group.
CH1_DALL:LABel:FONT:TYPE? might return CH1_DALL:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:CH<x>_DALL:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns underline font on or off. |
| value | integer | 0 | 0 turns off underline font; any other value turns it on. |
integer - Returns 0 when underline is off; any other value indicates underline is on.
CH1_DALL:LABel:FONT:UNDERline ON specifies an underlined font. CH1_DALL:LABel:FONT:UNDERline? might return CH1_DALL:LABEL:FONT:UNDERLINE 0 indicating underline is off.
Sets or queries the underline state of the specified digital group. The channel is specified by x.
enum - Returns the underline state as 0 for off; any other value indicates underline on.
CH1_DALL:LABel:FONT:UNDERline ON specifies an underlined font. CH1_DALL:LABel:FONT:UNDERline? might return CH1_DALL:LABEL:FONT:UNDERLINE 0 indicating underline is off.
:CH<x>_DALL:LABel:NAMeset / query
Sets or queries the label of the specified digital group. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Channel number. |
:CH<x>_D<x>:LABel:COLorset / query
Sets or queries the color of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| color | string | - | Label color string; send an empty string to restore the default color. |
string - Returns the label color string.
CH1_D1:LABel:COLor "#FF0000" sets the color to red. CH1_D1:LABel:COLor? might return CH1_D1:LABEL:COLOR "#FFFF00" indicating the color is yellow.
Sets or queries the color of the label of the specified digital bit. The channel is specified by x.
string - Returns the label color as a string; the manual shows an example like "#FFFF00". An empty string can be sent to restore the default color.
CH1_D1:LABel:COLor "#FF0000" CH1_D1:LABel:COLor?
:CH<x>_D<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the label for the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Bold state of the digital-bit label font. |
Sets or queries the bold state of the label for the specified digital bit. The channel is specified by x.
enum - Returns the bold state of the label.
:CH<x>_D<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Turns italic font on or off; <NR1> = 0 turns it off, any other value turns it on. |
enum - Returns the italic state of the label of the specified digital bit.
CH1_D1:LABel:FONT:ITALic OFF turns off italic font. CH1_D1:LABel:FONT:ITALic? might return CH1_D1:LABEL:FONT:ITALIC 1 indicating the font is italic.
Sets or queries the italic state of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns italic font on or off. |
enum - Returns the italic state as 0 for off or 1 for on.
CH1_D1:LABel:FONT:ITALic OFF turns off italic font. CH1_D1:LABel:FONT:ITALic? might return CH1_D1:LABEL:FONT:ITALIC 1 indicating the font is italic.
:CH<x>_D<x>:LABel:FONT:SIZEset / query
Sets or queries the font size of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | The font size. |
CH1_D1:LABel:FONT:SIZE 16 sets the font size to 16 points. CH1_D1:LABel:FONT:SIZE? might return CH1_D1:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
Sets or queries the font size of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The font size. |
integer - Returns the font size of the label of the specified digital bit.
CH1_D1:LABel:FONT:SIZE 16 sets the font size to 16 points. CH1_D1:LABel:FONT:SIZE? might return CH1_D1:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
:CH<x>_D<x>:LABel:FONT:TYPEset / query
Sets or queries the font type used for the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The font type of the label. |
string - Returns the current label font type for the specified digital bit.
CH1_D1:LABel:FONT:TYPE "Monospace" sets the font to Monospace. CH1_D1:LABel:FONT:TYPE? might return CH1_D1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
Queries the font type used for the label of the specified digital bit. The channel and digital-bit indices are specified by x.
string - Returns the label font type for the specified digital bit.
CH1_D1:LABel:FONT:TYPE "Monospace" sets the font to Monospace. CH1_D1:LABel:FONT:TYPE? might return CH1_D1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:CH<x>_D<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Turns underline font on or off; <NR1> = 0 turns it off and any other value turns it on. |
enum - Returns the underline state of the label of the specified digital bit; the example shows 0 for off.
CH1_D1:LABel:FONT:UNDERline ON turns on underline font. CH1_D1:LABel:FONT:UNDERline? might return CH1_D1:LABEL:FONT:UNDERLINE 0 indicating the underline font is off.
Sets or queries the underline state of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Underline font state for the label. |
enum - Returns the underline state of the label of the specified digital bit; 0 indicates underline off, and any other value indicates underline on.
CH1_D1:LABel:FONT:UNDERline ON turns on underline font. CH1_D1:LABel:FONT:UNDERline? might return CH1_D1:LABEL:FONT:UNDERLINE 0 indicating the underline font is off.
:CH<x>_D<x>:LABel:NAMeset / query
Sets or queries the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| label | string | - | Label text for the specified digital bit. |
:CLEARset / query
Clears acquisitions, measurements, and waveforms.
CLEAR
Queries the maximum licensed bandwidth of the instrument.
real (Hz) - The maximum licensed bandwidth of the instrument is returned.
CONFIGuration:ANALOg:BANDWidth? might return CONFIGURATION:ANALOG:BANDWIDTH 2.0000E+9 indicating the bandwidth is 2.0 GHz.
:CONNected:REQUested:STATusset / query
Sets the status of the Connected Scope Preference feature. The argument is 1 to enable or 0 to disable the feature; after issuing this command, CONNected:SAVEPREferences should be set immediately to make the feature enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 - 1 | Enables or disables the Connected Scope Preference feature. |
CONNected:REQUested:STATus 1 CONNected:SAVEPREferences enables and saves Connected Scope Preference feature.
:CONNected:STATus?query
Returns the connected scope preference status. A return value of 1 means the feature is enabled and 0 means it is disabled.
integer - Returns 1 if the Connected Scope Preference feature is enabled, or 0 if it is disabled.
CONNected:STATus? might return CONNected:STATus 1, indicating the Connected Scope Preference feature is enabled.
:CONNected:USAGe:TRack:REQUested:STATusset / query
Sets the tracking usage status of the Connected Scope Preference feature. After issuing this command, CONNected:SAVEPREferences should be set immediately to make the feature enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 0 - 1 | Enables or disables the Connected Scope Preference feature; 1 enables it and 0 disables it. |
CONNected:USAGe:TRack:REQUested:STATus 1 CONNected:SAVEPREferences
Returns the tracking usage status of the Connected Scope Preference feature. The return value is 1 when enabled and 0 when disabled.
enum - Returns 1 if the tracking usage status is enabled and 0 if it is disabled.
CONNected:USAGe:TRack:STATus? might return CONNected:USAGe:TRack:STATus 1, indicating the tracking usage status of the Connected Scope Preference feature is enabled.
:CURVe?query
Returns waveform transfer data for the selected source. For digital channels, the returned format depends on :DATa:WIDth; for FastAcq pixmap mode, CURVe? returns pixmap data.
block - Returns waveform data for the selected source. For digital sources, the data may be state-only or transition data depending on :DATa:WIDth; for MATH sources, 8-byte double precision floating point data is returned; for FastAcq pixmap mode, pixmap data is returned.
:CURVE?query
Returns waveform data from the current source using the settings established by WFMOutpre?. The transfer format depends on the selected encoding and source waveform type.
block - Returns waveform data points; for analog waveforms the data are returned as binary bytes, and for digital waveforms the data are returned as ASCII values.
:CURVE? :CURVe #510000<10,000 binary bytes of waveform data.>
:CURVEStream?query
Continuously transfers waveform data from the instrument as it is acquired, putting the instrument into streaming data mode. It supports the same data formatting options as CURVe? and must be terminated by the GPIB controller with a device clear or another command/query.
block - Returns streaming waveform data continuously as it is acquired.
:CUSTOMTABle:ADDNewset / query
Adds a new custom results table.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the custom results table name. |
CUSTOMTABle:ADDNew "TABLE1" adds a new custom table named TABLE1.
:CUSTOMTABle:DELeteset / query
Deletes the custom result table that was added.
:CUSTOMTABle:LIST?query
Queries the list of custom result tables that has been added.
string - Returns the names of the custom result tables, such as TABLE1 and TABLE2.
CUSTOMTABle:LIST? might return CUSTOMTABle:LIST TABLE1, TABLE2, indicating there are two custom result tables.
:DATaset / query
Sets or queries the format and location of the waveform data transferred with the CURVe? command.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | INIT | SNAp | Selects the waveform data format/location mode. |
enum - Returns the current waveform data format/location setting.
:DATa:ENCdgset / query
Sets or queries the format of outgoing waveform data. It is equivalent to setting WFMOutpre:ENCdg, WFMOutpre:BN_Fmt, and WFMOutpre:BYT_Or; setting the value updates the corresponding WFMOutpre settings and vice versa.
| Name | Type | Values | Description |
|---|---|---|---|
| encoding | enum | ASCIi | RIBinary | RPBinary | FPBinary | SRIbinary | SRPbinary | Format of outgoing waveform data. |
enum - Returns the current outgoing waveform data format.
DATa:ENCdg {ASCIi|RIBinary|RPBinary|FPBinary|SRIbinary|SRPbinary}
DATa:ENCdg?:DATa:FRAMESTARtset / query
Sets or queries the starting acquisition used for waveform transfer with CURVE?. This is only relevant when History or FastFrame acquisition modes are enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - number of History or FastFrame acquisitions | The first acquisition that will be transferred. |
integer - The first acquisition to be transferred.
DATA:FRAMESTART 10 DATA:FRAMESTART?
:DATa:FRAMESTOPset / query
Sets or queries the last acquisition used for waveform transfer with CURVE?. This is only relevant when History or FastFrame acquisition modes are enabled.
:DATa:MODeset / query
Sets or queries the mode for waveform data sent to returned by CURVe?. When FastAcq mode is ON and the value is PIXmap, Fast Acquisition pixmap data is returned; VECtor returns waveform sampled data.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | VECtor | PIXmap | Waveform data mode. |
enum - Returns the current waveform data mode.
DATA:MODE VECtor sets the mode for waveform data to vector. DATA:MODE? might return DATa:MODe VECtor, indicating that the mode for waveform data is set to vector.
:DATa:RESampleset / query
Sets the resampling of outgoing waveform data. It is equivalent to setting WFMOutpre:RESample, and changes are reflected in both commands.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Resampling setting for outgoing waveform data. |
:DATa:SOUrceset / query
Sets or queries the location of waveform data transferred from the instrument by CURVe?. The source can be a channel, math waveform, reference waveform, digital waveform, or certain Spectrum View / RF-vs-Time waveform selections.
| Name | Type | Values | Description |
|---|---|---|---|
| wfm | enum | CH<x> | MATH<x> | REF<x> | DIGITALALL | CH<x>_D<x> | CH<x>_DAll | CH<x>_SV_NORMal | CH<x>_SV_AVErage | CH<x>_SV_MAX_Hold | CH<x>_SV_MIN_Hold | CH<x>_MAG_VS_TIME | CH<x>_FREQ_VS_TIME | CH<x>_PHASE_VS_TIME | Location of the waveform data to transfer from the instrument to the controller. |
enum - Returns the current waveform data source.
DATa:SOUrce <wfm>[<,><wfm>] DATa:SOUrce?
Returns a list of source waveforms that are currently available for :CURVe? queries. If none are available, NONE is returned.
enum - A list of source waveforms currently available for :CURVe? queries; NONE is returned if there are none.
DATA:SOURCE:AVAILABLE? might return DATA:SOURCE:AVAILABLE CH2,CH3,CH6,CH7,MATH1,REF1 indicating that CH2, CH3, CH6, CH7, MATH1, and REF1 are available.
:DATa:STARtset / query
Sets or queries the starting data point for waveform transfer. It allows partial waveforms to be transferred to and from the instrument; data is transferred from <NR1> to DATa:STOP or the record length, whichever is less.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Starting data point for waveform transfer. |
:DATa:STOPset / query
Sets or queries the last data point transferred for a CURVe? waveform transfer. It is used to transfer partial waveforms; if the value exceeds the record length, transfer stops at the record length.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - the record length | Last data point that will be transferred. |
integer - Returns the last waveform data point that will be transferred.
DATA:STOP 15000 specifies that the waveform transfer will stop at data point 15000. DATA:STOP? might return DATA:STOP 14900, indicating that 14900 is the last waveform data point that will be transferred.
:DATa:WIDthset / query
Specifies the width, in bytes per point, for waveform data transferred from the instrument via the CURVe? query. This command is synonymous with WFMOutpre:BYT_Nr.
:DATA:DESTINATIONset / query
Sets the destination for acquired data. The factory default is REF1.
| Name | Type | Values | Description |
|---|---|---|---|
| destination | enum | REF1 | Destination for acquired data. |
:DATA:ENCDGset / query
Sets the data encoding used for waveform data transfers. The factory default is RIBinary.
| Name | Type | Values | Description |
|---|---|---|---|
| encoding | enum | RIBINARY | Data encoding format. |
:DATA:SOURCEset / query
Sets the data source to the specified channel. Factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Data source selection. |
:DATA:STARTset / query
Sets the starting data index. The factory default is 1.
:DATA:STOPset / query
Sets the stop point for the data source range. The factory default is 10000.
| Name | Type | Values | Description |
|---|---|---|---|
| stop | integer | - | Stop point for the data source range. |
:DATa:STARTset / query
Sets the starting data point for waveform data transfer. It is used with :DATa:STOP to transfer only a portion of the record length.
| Name | Type | Values | Description |
|---|---|---|---|
| start | integer | 1 | Starting data point for the waveform transfer. |
:DATa:START 1 :DATa:STARt 495
:DATE?query
Queries the date displayed by the instrument. The returned date is in yyyy-mm-dd form.
string - A date in the form yyyy-mm-dd.
DATE? might return DATE 2000-01-24, indicating the current date is set to January 24, 2000.
:DIAg:LOOP:OPTionset / query
Sets or queries the type of looping desired for the self test diagnostics.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FAIL | ONCE | ALWAYS | ONFAIL | NTIMES | Selects the looping mode. |
enum - Returns the current looping option value.
DIAG:LOOP:OPTION ALWAYS sets loop option to ALWAYS. DIAG:LOOP:OPTION? returns current looping option value.
:DIAg:LOOP:OPTion:NTIMesset / query
Sets or queries how many loops to run when the loop option is NTIMes.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | Number of loops to run. |
integer - Returns the current number of loops to run.
DIAG:LOOP:OPTION:NTIMES 2 sets diagnostics to loop 2 times.
:DIAg:LOOP:STOPset / query
Request that diagnostics stop looping.
DIAG:LOOP:STOP stops diagnostics looping.
:DIAg:MODeset / query
Sets or queries the diagnostics mode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | POST | EXTENDED | SERVICE | Selects the diagnostics mode. |
enum - Returns the diagnostics mode.
DIAG:MODE POST specifies the power on self test diagnostics.
:DIAg:RESUlt?query
Returns both the overall diagnostics test results and the results of each individual test area.
string - The diagnostics results.
DIAG:RESULT? might return DIAG:RESULT:FLAG "NOT RUN";LOG "PASS--IO,PASS--ANALOG,PASS--SYSTEM,PASS--ASIC,PASS--ACQ,PASS--SIGNAL,PASS--MEMORY" indicating the diagnostics results.
:DIAg:RESUlt:FLAg?query
Returns the status of the selected diagnostic test area. The status is reported for a single diagnostic area.
enum - The status of the diagnostics for the selected area.
:DIAg:RESUlt:LOG?query
Returns the test Pass/Fail status of each diagnostic area. It does not return the overall status.
string - The status of the diagnostic area.
DIAG:RESULT:LOG? might return DIAG:RESULT:LOG "PASS--IO,PASS--ANALOG,PASS--SYSTEM,PASS--ASIC,PASS--ACQ, PASS--SIGNAL,PASS--MEMORY" indicating the diagnostics result stored in the log.
:DIAg:SELectset / query
Selects an available diagnostic area. The command accepts one of several diagnostic area keywords.
| Name | Type | Values | Description |
|---|---|---|---|
| area | enum | ALL | IO | ANALOG | SYSTEM | ASIC | ACQ | SIGNAL | MEMORY | FRONTPANEL | Diagnostic area to select. |
:DIAg:STATEset / query
Executes the instrument diagnostic state operation. It is one of the operations that can generate an Operation Complete event.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EXECute | Execution qualifier for the diagnostic state operation. |
:DIGGRP<x>:D<x>:THResholdset / query
Sets or queries the threshold level in volts for the specified digital channel. If the source channel doesn't exist, a hardware missing error event is set.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number for the digital group. |
| x | integer | 0 - 7 | Digital channel bit number. |
| threshold | real | V | Threshold level for the specified digital channel. |
real (V) - Returns the threshold level in volts for the specified digital channel.
DIGGRP1:D1:THReshold 30.0E-3 sets the threshold to 30 mV. DIGGRP1:D1:THReshold? might return DIGGRP1:D1:THRESHOLD 0.0E+0 indicating the threshold is 0.0 V.
:EVMsg?query
Removes a single event code from the Event Queue associated with the results of the last *ESR? read and returns the event code with an explanatory message.
string - Returns the event code and message in the format <Event Code>,<QString>, where <QString> is an explanatory message and may include the command that caused the error.
EVMSG? might return EVMSG 110,"Command header error".
:EVMSG?query
Returns the event number and a text description of the event. Reading an event removes it from the Event Queue.
string - Returns the event number and a text description of the event.
:EVQty?query
Returns the number of events that are enabled in the queue. This is useful when using the ALLEv? query to determine exactly how many events will be returned.
integer - The number of events enabled in the queue.
EVQTY? might return EVQTY 3, indicating the number of event codes in the Event Queue.
:FILESystem:COPyset / query
Copies a named file to a new file, which may be in a different directory. Only one file can be copied at a time, and wildcard characters are not allowed.
| Name | Type | Values | Description |
|---|---|---|---|
| source_file_path | string | - | Quoted string that defines the file name and path or directory of the source file. |
| destination_file_path | string | - | Quoted string that defines the file name and path of the destination file. |
FILESYSTEM:COPY "E:/setup1.set","E:/SETUPS/setup1.set"
:FILESystem?query
Returns the directory listing of the current working directory. This query is the same as the FILESystem:DIR? query.
string - Returns the directory listing of the current working directory.
FILESYSTEM? might return FILESYSTEM:DIR "myFile.txt","myWaveform.wfm".
:FILESystem:CWDset / query
Sets or queries the current working directory used by other FILESystem commands. The directory name can be up to 128 characters.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that defines the current working directory. |
string - Returns the current working directory as a FILESystem:CWD command string.
FILESYSTEM:CWD "E:/waveforms/" FILESYSTEM:CWD?
:FILESystem:CWD?query
Sets or queries the current working directory used by other FILESystem commands. CWD is short for Current Working Directory.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that defines the current working directory; the directory name can be up to 128 characters. |
returns
FILESYSTEM:CWD "E:/waveforms/" FILESYSTEM:CWD?
:FILESystem:DELEteset / query
Deletes a named file or empty directory from a mass storage device. If the file path is within the current working directory, only the file name is needed.
| Name | Type | Values | Description |
|---|---|---|---|
| file_path | string | - | Quoted string defining the file name and path to delete. |
:FILESystem:DIR?query
Returns a comma-separated list of quoted strings, each containing the name of a file or directory in the folder referred to by the :FILESYSTEM:CWD command.
string - A comma-separated list of quoted strings naming each file or directory in the current folder.
FILESYSTEM:DIR? FILESYSTEM:DIR"161012_132039_000.wfm","161012_132039_001.wfm","161220_191452.png", "161220_191554.csv","170320_132925_0 00.wfm","170320_132929_000.set","Ch2- Ch3_000.set","E:","F:","G:","H:", "I:","J:","Rgjtest_000.set","RgjSetupRuntTrig4chnls_000.set","RgjSetup_000.set","ScrnShot1jeh2_0 "ScrnShot1jeh_000.wfm","ScrnShot_000.png","ScrnShot_000.wfm","Scrn_000.set","Scrn_001.set","Scrn "Scrn_003.set","Scrn_004.set","Wfm_000.wfm","Wfm_001.wfm","Wfm_002.wfm","Wfm_003.wfm","Wfm_004.w "Wfm_005.wfm","Wfm_006.wfm","digChans_000.wfm".
:FILESystem:HOMEDir?query
Returns the current user's home directory.
string - The current user's home directory as a quoted string.
FILESYSTEM:HOMEDIR? might return "C:".
:FILESystem:LDIR?query
Returns a comma-separated list of every file, file size, type, modification date and time, and directory in the folder referred to by the FILESYSTEM:CWD command. Each entry uses the long format `<file name>;<type>;<size in bytes>;<date>;<time>`.
string - A comma-separated list of quoted entries describing files and directories in the current folder, using long-format semicolon-separated fields for each entry.
FILESYSTEM:LDIR?
:FILESystem:MKDirset / query
Creates a new directory.
| Name | Type | Values | Description |
|---|---|---|---|
| directory_path | string | - | Quoted string that specifies the directory to create. |
FILESYSTEM:MKDIR "E:\NewDirectory" creates the directory named NewDirectory at the root of the E drive. FILESYSTEM:CWD "E:/MyDirectory"; FILESYSTEM:MKDIR "MyNewSubDirectory"
:FILESystem:MOUNT:DRIVEset / query
Mounts a network drive specified by a quoted, semicolon-separated argument string. The fields include drive name, server identity, path, and optional user/password, domain/workgroup, and verbose settings for SMB/CIFS interworking.
| Name | Type | Values | Description |
|---|---|---|---|
| drive | string | - | Drive name to be mounted; a case-insensitive single letter followed by a colon, from L: to Z: inclusive. |
| server | string | - | DNS name or IP address of the server. |
| path | string | - | Path to be mounted. |
| user nameopt | string | - | User name for the drive. |
| user passwordopt | string | - | Password for the drive. |
| domain nameopt | string | - | Domain or workgroup of the target mount. |
| verboseopt | string | - | Verbose option to capture mount failure messages. |
Mounts a network drive specified by a quoted string argument. The argument is a semicolon-separated list containing the drive name, server identity, path, and optional SMB/CIFS fields.
| Name | Type | Values | Description |
|---|---|---|---|
| drive_name | string | - | Drive name to be mounted; a case-insensitive single letter followed by a colon, from L: through Z:. |
| server_identity | string | - | DNS name or IP address of the server. |
| path | string | - | Path to be mounted. |
| user_nameopt | string | - | User name for the drive. |
| user_passwordopt | string | - | Password for the drive. |
| domain_nameopt | string | - | Domain or workgroup of the target mount. |
| verboseopt | string | - | Verbose option to capture mount failure messages. |
:FILESystem:MOUNT:TEKDriveset / query
Mounts the specified TekDrive from a quoted string argument. The argument must include the drive name, AutoDisconnectMode, RestrictToCurrentIP, and AutoDisconnectTime; the query form reports whether the specified TekDrive is mounted.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string containing the TekDrive name and mount options. |
enum - Returns 1 if the specified TekDrive is mounted and 0 if it is not mounted.
FILESystem:MOUNT:TEKDrive "TekDrive1;Custom;true;8"
Mounts the specified TekDrive from a quoted string argument containing the drive name, AutoDisconnectMode, RestrictToCurrentIP, and AutoDisconnectTime. The query form returns whether the specified TekDrive is mounted.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string containing the drive name, AutoDisconnectMode, RestrictToCurrentIP, and AutoDisconnectTime. |
integer - Returns 1 if the specified TekDrive is mounted, or 0 if it is not mounted.
FILESystem:MOUNT:TEKDrive "TekDrive1;Custom;true;8"
:FILESystem:READFileset / query
Writes the contents of the specified file to the current interface. If the file does not exist or is not readable, an appropriate error event is posted.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that defines the file name and path. |
FILESYSTEM:READFILE "E:/test_data/tek00016CH1.csv"
:FILESystem:RENameset / query
Assigns a new name to an existing file or folder.
| Name | Type | Values | Description |
|---|---|---|---|
| old_file_path | string | - | The quoted string defining the existing file or folder name and path. |
| new_file_path | string | - | The quoted string defining the new file or folder name and path. |
FILESYSTEM:RENAME "E:/TEK00000.SET","E:/MYSETTING.SET" FILESYSTEM:RENAME "E:/mySettings/tek00000.set","E:/setup1.set"
:FILESystem:RMDirset / query
Deletes a named directory. The directory must be empty.
| Name | Type | Values | Description |
|---|---|---|---|
| directory | string | - | Name and path of the directory to delete. |
Returns the expiry time of the TekDrive short code as an absolute time. For example, if the mounting was initiated at 2:11 pm, the expiry query returns 2:16 pm.
string - Absolute expiry time of the TekDrive short code.
FILESYSTEM:TEKDRIVE:CODE:EXPIRYTIME? might return "Wed Nov 11 17:29:44 2020".
Returns the status of the TekDrive short code.
enum - Returns the short code status.
Returns a short TekDrive activation code in string format for mounting TekDrive. The code must be entered or pasted at http://drive.tekcloud.com/activate.
string - Short code returned as a string.
FILESYSTEM:TEKDRIVE:CODE? might return "xYxrr", indicating the code string xYxrr needs to be entered at http://drive.tekcloud.com/activate and activated.
:FILESystem:UNMOUNT:DRIveset / query
Unmounts the USB drive specified by the quoted string argument.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that specifies which USB drive to unmount; a case-insensitive single letter followed by a colon. |
FILESYSTEM:UNMOUNT:DRIVE "G:" specifies to unmount the flash drive installed in the right-most USB slot on the front of the instrument.
:FILESystem:UNMOUNT:TEKDriveset / query
This command unmounts the TekDrive specified by the quoted string argument. The drive name is case insensitive.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that specifies the TekDrive to unmount. |
FILESystem:UNMOUNT:TEKDrive "TekDrive1" specifies to unmount the TekDrive named "TekDrive1".
:FILESystem:WRITEFileset / query
Writes the specified block data to a file on the instrument's file system. If the destination file cannot be written, an error event is posted.
| Name | Type | Values | Description |
|---|---|---|---|
| file_path | string | - | Quoted string that defines the file name and path. |
| data | block | - | Block data to be written to the file. |
:FPAnel:PRESSset / query
Emulates a front-panel button press. When used with knob enumerations, it pushes the knob; use FPAnel:TURN to emulate knob turns.
| Name | Type | Values | Description |
|---|---|---|---|
| button | enum | AUTOset | BUS | CH<x> | CLEAR | CURsor | DEFaultsetup | FASTAcq | FORCetrig | GPKNOB1 | GPKNOB2 | HIGHRES | HORZPOS | HORZScale | MATh | NEXt | PREv | REF | RUNSTop | SETTO50 | SINGleseq | TOUCHSCReen | TRIGMode | TRIGSlope | USER | VERTPOS | VERTSCALE | ZOOM | Front-panel control to emulate. |
:FPAnel:TURNset / query
Emulates a front-panel knob turn. The optional NR1 specifies the number of clicks; negative values indicate counterclockwise turns and the default is 1 click clockwise.
| Name | Type | Values | Description |
|---|---|---|---|
| knob | enum | GPKNOB1 | GPKNOB2 | HORZPOS | HORZScale | PANKNOB | TRIGLevel | VERTPOS | VERTSCALE | ZOOM | Selects which front-panel knob is emulated. |
| NR1opt | integer | - | Number of clicks to turn the selected knob; negative values indicate counterclockwise rotation. |
FPANEL:TURN TRIGLEVEL, 3 emulates turning the trigger Level knob 3 clicks in the clockwise direction.
:HEADerset / query
Sets or queries the Response Header Enable State, which controls whether query responses include headers or only the returned argument. This does not affect IEEE Std 488.2 common commands; header keyword form is affected by :VERBose.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Sets the Response Header Enable State to false or true. |
| value | integer | 0 | <NR1> value where 0 sets the state false and any other value sets it true. |
enum - Returns the Response Header Enable State as 0 when headers are disabled and 1 when headers are enabled.
HEADER OFF HEADER?
:HEADer?query
Sets or queries the Response Header Enable State, which controls whether query responses include headers. The state does not affect IEEE Std 488.2 common commands, which never return headers.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Selects whether response headers are omitted or included on applicable query responses. |
boolean - Returns the Response Header Enable State.
HEADER OFF HEADER? With :VERBose ON and :HEADer ON, the :ACQuire:MODe? query might return: :ACQUIRE:MODE SAMPLE. With :VERBose OFF and :HEADer ON, the :ACQuire:MODe? query might return: :ACQ:MOD SAM. With :VERBose ON and :HEADer OFF, the :ACQuire:MODe? query might return: SAMPLE. With :VERBose OFF and :HEADer OFF, the :ACQuire:MODe? query might return: SAM.
:HEADERset / query
Sets the header mode to the factory default value shown in the defaults table.
:HISTogram:ADDNewset / query
Adds a new histogram instance with the specified name.
| Name | Type | Values | Description |
|---|---|---|---|
| name | string | - | Specifies the histogram name to add. |
HISTogram:ADDNew "HIST7" adds waveform histogram 7.
:HISTogram:DELETEALLset / query
Deletes all the active instances of histograms defined in the scope application.
HISTogram:DELETEALL deletes all the active instances of histograms.
:HISTogram:DELeteset / query
Deletes the specified histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the waveform histogram to delete. |
HISTogram:DELETE "HIST4" deletes histogram 4.
:HISTogram:HISTogram<x>:BOXset / query
Sets or queries the top, left, bottom, and right positions of the histogram box in source waveform coordinates. The values are given as <top>,<left>,<bottom>,<right>.
| Name | Type | Values | Description |
|---|---|---|---|
| top | real | - | Top coordinate of the histogram box. |
| left | real | - | Left coordinate of the histogram box. |
| bottom | real | - | Bottom coordinate of the histogram box. |
| right | real | - | Right coordinate of the histogram box. |
:HISTogram:HISTogram<x>:BSTateset / query
Sets or queries whether the histogram badge is displayed. HISTogram<x> specifies the histogram number.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the histogram badge display. |
enum - Returns the histogram badge display state.
HISTogram:HISTogram2:BSTate ON HISTogram:HISTogram2:BSTate? might return HISTogram:HISTogram2:BSTate OFF, indicating the badge display for histogram 2 is disabled.
Returns a comma-separated list of the histogram bin data. HISTogram<x> specifies the histogram number.
numeric - A comma-separated list of the histogram bin data.
HISTogram:HISTogram2:DATa? might return HISTogram2:DATa 332.224000E+3, 337.415000E+3, 337.415000E+3, 337.415000E+3,166.112000E+3, listing the histogram bin data.
:HISTogram:HISTogram<x>:DISPlayset / query
Sets or queries the display scaling mode for the specified histogram. Linear mode uses a linear scale; logarithmic mode uses a logarithmic scale.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| mode | enum | LINEAr | LOG | Selects linear or logarithmic display scaling. |
enum - Returns the current display scaling mode for the specified histogram.
HISTogram:HISTogram2:DISPlay LOG HISTogram:HISTogram2:DISPlay? might return HISTogram:HISTogram2:DISPlay LINEAR
:HISTogram:HISTogram<x>:FUNCtionset / query
Sets or queries the histogram mode for the specified histogram. The mode can be horizontal or vertical.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| mode | enum | HORizontal | VERTical | Sets the histogram mode. |
enum - Returns the histogram mode for the specified histogram.
HISTogram:HISTogram2:FUNCtion VERTical sets the histogram mode for histogram 2 to Vertical. HISTogram:HISTogram2:FUNCtion? might return HISTogram:HISTogram2:FUNCtion HORIZONTAL, indicating the function for histogram 2 is Horizontal.
:HISTogram:HISTogram<x>:MEASurement:COUNtset / query
Sets or queries whether waveform count measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the waveform count measurement. |
:HISTogram:HISTogram<x>:MEASurement:HITSset / query
Sets or queries whether the Hits in Box measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Hits in Box measurement. |
enum - Indicates whether the Hits in Box measurement is enabled or disabled on the histogram.
HISTogram:HISTogram2:MEASurement:HITS ON enables the Hits in Box measurement for histogram 2. HISTogram:HISTogram2:MEASurement:HITS? might return HISTogram:HISTogram2:MEASurement:HITS OFF, indicating the Hits in Box measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:MAXset / query
Sets or queries whether the Max measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Max measurement. |
HISTogram:HISTogram2:MEASurement:MAX ON enables the Max measurement for histogram 2. HISTogram:HISTogram2:MEASurement:MAX? might return HISTogram:HISTogram2:MEASurement:MAX OFF, indicating the Max measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:MEANset / query
Sets or queries whether the Mean measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the Mean measurement. |
HISTogram:HISTogram2:MEASurement:MEAN ON HISTogram:HISTogram2:MEASurement:MEAN? might return HISTogram:HISTogram2:MEASurement:MEAN OFF, indicating the Mean measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:MEDianset / query
Sets or queries whether the Median measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Median measurement. |
enum - Returns the current Median measurement setting for the specified histogram.
HISTogram:HISTogram2:MEASurement:MEDian ON HISTogram:HISTogram2:MEASurement:MEDian? might return HISTogram:HISTogram2:MEASurement:MEDian OFF, indicating the Median measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:MINset / query
Sets or queries whether the Min measurement is enabled on the specified histogram. The query returns the current on/off state for that measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Histogram number. |
| state | enum | ON | OFF | Enables or disables the Min measurement. |
enum - Current Min measurement state for the specified histogram.
HISTogram:HISTogram2:MEASurement:MIN ON enables the Min measurement for histogram 2. HISTogram:HISTogram2:MEASurement:MIN? might return :HISTogram:HISTogram2:MEASurement:MIN OFF, indicating the Min measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:MODEset / query
Sets or queries whether the Mode measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the Mode measurement. |
enum - Returns the Mode measurement state for the selected histogram.
HISTogram:HISTogram2:MEASurement:MODE ON enables the Mode measurement for histogram 2. HISTogram:HISTogram2:MEASurement:MODE? might return HISTogram:HISTogram2:MEASurement:MODE OFF, indicating the Mode measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:ONESigmaset / query
Sets or queries whether the μ±1σ measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the μ±1σ measurement. |
:HISTogram:HISTogram<x>:MEASurement:PHITsset / query
Sets or queries whether the Peak Hits measurement is enabled on the specified histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Peak Hits measurement. |
enum - Returns the Peak Hits measurement state for the specified histogram.
HISTogram:HISTogram2:MEASurement:PHITs ON enables the Peak Hits measurement for histogram 2. HISTogram:HISTogram2:MEASurement:PHITs? might return HISTogram:HISTogram2:MEASurement:PHITs OFF, indicating the Peak Hits measurement for histogram 2 is disabled.
:HISTogram:HISTogram<x>:MEASurement:PK2PKset / query
Sets or queries whether the Peak-to-peak measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Peak-to-peak measurement. |
HISTogram:HISTogram2:MEASurement:PK2PK ON HISTogram:HISTogram2:MEASurement:PK2PK?
Returns measurement results from the specified histogram. The argument format is {measurement},{acquisitions},{statistic}.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement | enum | COUNt | HITS | MAX | MIN | PK2PK | MODE | MEAN | MEDian | PHITs | STDDev | ONESigma | TWOSigma | THRSigma | Specifies which histogram measurement to return results for. |
| acquisitions | enum | ALLAcqs | CURRentacq | HISTory | Specifies which acquisitions to return measurement results for. |
| statistic | enum | MAXimum | MEAN | MINimum | PK2PK | POPUlation | STDDev | Specifies which statistic to return measurement results for. |
string - Returns results in the form of {histogram measurement results},{acquisition results},{statistic results}.
HISTogram:HISTogram2:MEASurement:RESUlts? COUNt,ALLAcqs,MEAN might return
:HISTogram:HISTogram<x>:MEASurement:STDDevset / query
Sets or queries whether the Standard Deviation measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the Standard Deviation measurement. |
enum - Indicates whether the Standard Deviation measurement is enabled on the selected histogram.
HISTogram:HISTogram2:MEASurement:STDDev ON HISTogram:HISTogram2:MEASurement:STDDev?
:HISTogram:HISTogram<x>:MEASurement:THRSigmaset / query
Sets or queries whether the μ±3σ measurement is enabled on the histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the μ±3σ measurement. |
enum - Returns whether the μ±3σ measurement is enabled on the histogram.
HISTogram:HISTogram2:MEASurement:THRSigma ON HISTogram:HISTogram2:MEASurement:THRSigma?
:HISTogram:HISTogram<x>:MEASurement:TWOSigmaset / query
Enables or disables the μ±2σ measurement for the specified histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| state | enum | ON | OFF | Enables or disables the μ±2σ measurement. |
enum - Returns the current μ±2σ measurement state for the specified histogram.
HISTogram:HISTogram2:MEASurement:TWOSigma ON HISTogram:HISTogram2:MEASurement:TWOSigma?
:HISTogram:HISTogram<x>:SAVeset / query
Saves the specified histogram data as a comma-separated list of values. The file path is supplied as a quoted string.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| path | string | - | File path to save the .csv file to. |
HISTogram:HISTogram2:SAVe "C:/Users/Tek_Local_Admin/Documents/hist2.csv" saves the histogram 2 data to the specified location.
:HISTogram:HISTogram<x>:SIZeset / query
Sets or queries the height or width of the specified histogram bins in divisions. The size can be larger than the box, which allows the histogram bins to be viewed more easily.
| Name | Type | Values | Description |
|---|---|---|---|
| size | real | - | Number of divisions to set the histogram bins to. |
real - Returns the height or width of the specified histogram bins in divisions.
:HISTogram:HISTogram<x>:SOUrceset / query
Sets or queries which source waveform is compared against the histogram box when histogram testing is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the histogram number. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform as an analog channel, math channel, or reference waveform. |
enum - Returns the current histogram source setting.
HISTogram:HISTogram2:SOUrce CH3 HISTogram:HISTogram2:SOUrce?
:HISTogram:HISTogram<x>:STATEset / query
Sets or queries whether histogram calculations are enabled for the specified histogram.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the histogram calculations. |
enum - Returns the current histogram calculation state.
HISTogram:HISTogram2:STATE ON HISTogram:HISTogram2:STATE?
:HISTogram:HISTogram<x>:TRANsparencyset / query
Sets or queries the transparency of the histogram bins. Histogram number is specified by HISTogram<x>, and transparency is a percentage from 0 to 100.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 0 | Histogram number. |
| transparency | real | 0 - 100 | Transparency as a percentage. |
real (%) - Returns the transparency setting for the specified histogram bin as a percentage.
HISTogram:HISTogram2:TRANsparency 50 HISTogram:HISTogram2:TRANsparency?
:HISTogram:LIST?query
Returns a comma-separated list of all currently defined histograms.
string - Returns a comma-separated list of all currently defined histograms.
HISTogram:LIST? might return HISTogram:LIST HIST1,HIST2,HIST3,HIST4, indicating 4 histograms are defined.
:HISTOGRAM:BOXPCNTset / query
Sets the histogram box coordinates. The factory default is 20.0000,20.0000,80.0000,80.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| boxpcnt | real | - | Histogram box percentage coordinates. |
:HISTOGRAM:DISPLAYset / query
Sets the histogram display mode. The factory default is LINEAR.
:HISTOGRAM:MODEset / query
Sets the histogram mode. The factory default is OFF.
:HISTOGRAM:SOURCEset / query
Sets the histogram source channel. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Histogram source channel. |
:HORizontal?query
Queries the current horizontal settings.
returns
Returns the timebase duration.
real - Returns the duration of the acquisition.
HORIZONTAL:ACQDURATION? might return HORIZONTAL:ACQDURATION 5.0E-9, indicating the acquisition duration is 5.0 us.
:HORizontal:DELay:MODeset / query
Sets or queries the horizontal delay mode. OFF disables it, ON enables it, and numeric 0/other values map to off/on respectively.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | ON | Sets the Horizontal Delay Mode to off or on. |
enum - Returns the current Horizontal Delay Mode.
HORIZONTAL:DELAY:MODE OFF HORIZONTAL:DELAY:MODE?
:HORizontal:DELay:TIMeset / query
Sets or queries the horizontal delay time used when delay mode is on.
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | s | The delay time in seconds. |
real (s) - Returns the current horizontal delay time.
HORizontal:DELay:TIME 0.3 sets the delay of acquisition data so that the resulting waveform is centered 300 ms after the trigger occurs.
Returns the number of graticule divisions.
real - The number of graticule divisions.
HORIZONTAL:DIVISIONS? might return HORIZONTAL:DIVISIONS 10.0000, indicating that the waveform is displayed across ten divisions.
Returns all information under horizontal:fastframe.
string - Returns all information under horizontal:fastframe.
HORIZONTAL:FASTFRAME? might return HORIZONTAL:FASTFRAME:SELECTED 1;SUMFRAME:STATE0;:HORIZONTAL:FASTFRAME:COUNT 2;MULTIPLEFRAMES:MODEOFF;:HORIZONTAL:FASTFRAME:STATE 0;REF:INCLUDE 0;FRAME 1, the current FastFrame settings.
:HORizontal:FASTframe:COUNtset / query
Sets or returns the number of FASTframe frames.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The number of frames. |
integer - Returns the number of frames.
HORizontal:FASTframe:COUNt 10
Returns the maximum number of frames.
integer - The maximum number of frames.
HORIZONTAL:FASTFRAME:MAXFRAMES? might return HORIZONTAL:FASTFRAME:MAXFRAMES 2, indicating the maximum number of frames is 2.
:HORizontal:FASTframe:MULtipleframes:MODeset / query
Sets or returns the overlay display type for FastFrame multiple frames. OFF displays only the selected frame; OVERlay displays all frames with the temperature palette, excluding the summary frame.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OFF | OVERlay | Overlay display type. |
enum - Returns the overlay display type.
:HORizontal:FASTframe:REF:FRAmeset / query
Sets or returns the reference frame number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The reference frame number. |
integer - Returns the reference frame number.
HORizontal:FASTframe:REF:FRAme? might return HORIZONTAL:FASTFRAME:REF:FRAME 1, indicating the reference frame number is 1.
:HORizontal:FASTframe:REF:INCLUdeset / query
Sets or returns whether the reference frame delta information is shown in the display.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Controls whether reference frame delta information is shown; 0 indicates off and any other value displays the delta information. |
enum - Returns whether the reference frame delta information is shown in the display.
:HORizontal:FASTframe:SELECTEDset / query
Sets or returns the selected frame number for acquired frames. Refs have their own selected frames.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The selected frame number for acquired frames. |
:HORizontal:FASTframe:STATEset / query
Sets or returns the state of FastFrame. FastFrame is incompatible with Envelope and Average acquisition modes; turning FastFrame on in those modes changes acquisition to Sample.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Indicates whether FastFrame is off or active. |
| value | integer | 0 | A 0 turns off FastFrame; any other value activates FastFrame. |
integer - Returns 0 when FastFrame is off and 1 when FastFrame is active.
HORizontal:FASTframe:STATE? might return HORIZONTAL:FASTFRAME:STATE 0, indicating FastFrame is off.
:HORizontal:FASTframe:SUMFrameset / query
Sets or returns the summary frame type for FastFrame. Turning on Summary Frame does not adjust numberFrames unless there is room for an additional frame; otherwise numberFrames is reduced by 1.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONe | AVErage | ENVelope | Selects the Summary frame type. |
enum - Returns the current Summary frame type.
HORIZONTAL:FASTFRAME:SUMFRAME might return HORIZONTAL:FASTFRAME:SUMFRAME NONE, indicating the summary frame is off.
:HORizontal:FASTframe:SUMFrame:STATEset / query
Sets or returns the state of FastFrame summary frame. Summary frame mode is set automatically based on the acquisition mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NR1 | OFF | ON | Turns summary frame off or on; <NR1> value 0 turns it off, any other value activates it. |
enum - Returns the summary frame state as 0 for off or a nonzero value for on.
HORIZONTAL:FASTFRAME:SUMFRAME:STATE? might return HORIZONTAL:FASTFRAME:STATE 0,
Returns the time stamp of all frames. The format is a list of frame number and time stamp pairs, with each time-stamp string formatted as DD.MM.YYYY.HH:MM::SS.xxxxxxxxxxxx.
string - Returns all of the timestamps.
HORIZONTAL:FASTFRAME:TIMESTAMP:ALL? might return HORIZONTAL:FASTFRAME:TIMESTAMP:ALL "1: 31.12.1969.16:00:00.000000000000", indicating the only time
Returns the time difference for the FastFrame timestamp delta. The return value is in seconds and fractions of a second.
string (s) - Returns the time difference in seconds and fraction of a second, shown as a string such as "0.000000000000".
Returns the time-stamp of the FastFrame Reference frame.
string - Returns the reference timestamp as a date-time string in the form shown in the example.
Returns the time-stamp of the FastFrame selected acquired frame.
string - The timestamp of the selected FastFrame acquired frame, returned as a date-time string.
HORIZONTAL:FASTFRAME:TIMESTAMP:SELECTED? might return HORIZONTAL:FASTFRAME:TIMESTAMP:SELECTED "31.12.1969.17:00:00.000000000000" indicating the timestamp of the selected frame is 31.12.1969.17:00:00.000000000000.
Returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for all FastFrame frames specified by DATa:SOUrce. The value is returned as a string list in units of WFMOutpre:XUNit.
string (WFMOutpre:XUNit) - Returns the sub-sample time between PT_OFF and the actual trigger for all frames, formatted as a string of the form (frame #:zxero, frame #:xzero, and so on).
Returns the sub-sample time between the trigger sample designated by PT_OFF and the occurrence of the actual trigger for the reference frame waveform specified by DATa:SOUrce. The value is returned in units of WFMOutpre:XUNit.
real (WFMOutpre:XUNit) - Sub-sample time between PT_OFF and the actual trigger for the reference frame waveform.
HORIZONTAL:FASTFRAME:XZERO:REF? might return HORIZONTAL:FASTFRAME:XZERO:REF 1.0 indicating the sub-sample time is 1.0.
Returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for the selected frame. The value is in units of WFMOutpre:XUNit.
real (WFMOutpre:XUNit) - Returns the sub-sample time for the selected frame.
HORIZONTAL:FASTFRAME:XZERO:SELECTED? might return HORIZONTAL:FASTFRAME:XZERO:SELECTED 1.0
:HORizontal:HISTory:CSTAtsset / query
Sets or returns the history cumulative statistics type. In All Acquisitions mode, statistics and plots reflect all acquisitions since acquisition began; in History Only mode, they include only acquisitions in history. The default is All Acquisitions.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AACQs | HONLy | Selects the history cumulative statistics type. |
Sets the history cumulative statistics type.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AACQs | HONLy | History cumulative statistics type to set. |
enum - Returns the current history cumulative statistics type.
HORIZONTAL:HISTORY:CSTATS HONLy HORIZONTAL:HISTORY:CSTATS? might return HORIZONTAL:HISTORY:CSTATS AACQs, indicating the history cumulative statistics type is set to all acquisitions.
:HORizontal:HISTory:OVERlayset / query
Sets or returns whether all acquisitions in history are overlaid in the waveform view.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | ON overlays all acquisitions in history in the waveform view; OFF only shows the current acquisition in the waveform view. |
enum - Returns whether all acquisitions in history are overlaid in the waveform view.
HORIZONTAL:HISTORY:OVERLAY ON HORIZONTAL:HISTORY:OVERLAY?
:HORizontal:HISTory:REF:ACQset / query
Sets or queries the reference acquisition in History. By default, this is the first acquisition in History.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - the total number of acquisitions in History | Acquisition number to set. |
integer - Returns the reference acquisition number in History.
HORIZONTAL:HISTORY:REF:ACQ 1 HORIZONTAL:HISTORY:REF:ACQ? might return HORIZONTAL:HISTORY:REF:ACQ 1, indicating the first acquisition in History is selected.
:HORizontal:HISTory:REF:INCludeset / query
Sets or returns whether the history reference acquisition is included in the user interface history badge.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Includes or does not include the reference acquisition in the history badge. |
enum - Returns whether the history reference acquisition is included in the user interface history badge.
:HORizontal:HISTory:SELectedset / query
Sets or queries the selected acquisition in History. By default, this is the most recent acquisition in History.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - the total number of acquisitions in History | Acquisition number to set. |
integer - The selected acquisition number in History.
HORIZONTAL:HISTORY:SELECTED 1 selects the first acquisition in History HORIZONTAL:HISTORY:SELECTED? might return HORIZONTAL:HISTORY:SELECTED 1, indicating the first acquisition in History is selected.
:HORizontal:HISTory:STATeset / query
Sets or returns the state of History. If History is turned on, incompatible acquisition modes are changed to Sample, and attempts to set those modes while History is on will fail and revert to Sample mode.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 1 | 0 | Turns History off or on. |
Returns the difference between the timestamps of the history reference acquisition and the history selected acquisition.
real (s) - Return value is in seconds and fraction of a second.
HORIZONTAL:HISTORY:TIMESTAMP:DELTA? might return HORIZONTAL:HISTORY:TIMESTAMP:DELTA "0.326483333120", indicating the timestamp delta is 0.326483333120.
Returns the timestamp of the history reference acquisition.
string - Returns the timestamp of the history reference acquisition.
HORIZONTAL:HISTORY:TIMESTAMP:REFERENCE? might return HORIZONTAL:HISTORY:TIMESTAMP:REFERENCE "08.09.2021.05:56:00.250715955200"
Returns the timestamp of the selected history acquisition.
string - The timestamp of the history selected acquisition.
HORIZONTAL:HISTORY:TIMESTAMP:SELECTED? might return HORIZONTAL:HISTORY:TIMESTAMP:SELECTED "08.09.2021.05:56:00.250715955200"
This query-only command returns the horizontal interpolation ratio.
real - Returns the Horizontal interpolation ratio.
HORIZONTAL:MAIN:INTERPRATIO? might return HORIZONTAL:MAIN:INTERPRATIO 10.0.
:HORizontal:MODeset / query
Sets or queries the horizontal operating mode.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MANual | Selects the horizontal operating mode. |
enum - Returns the present horizontal operating mode.
HORIZONTAL:MODE AUTO sets the horizontal mode to auto. HORIZONTAL:MODE? might return HORIZONTAL:MODE MANUAL, indicating that the horizontal mode is manual.
Sets or queries the horizontal FastAcq maximum record length. The setter accepts an NR1 value for the maximum record length.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | - | Horizontal FastAcq maximum record length. |
HORIZONTAL:MODE:AUTOMATIC:FASTACQ:RECORDLENGTH:MAXIMUM:VALUE 6250
Sets or queries the flag which allows override of the horizontal FastAcq maximum record length.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Allows or disallows override of the horizontal FastAcq maximum record length. |
enum - Returns the override flag state.
HORIZONTAL:MODE:AUTOMATIC:FASTACQ:RECORDLENGTH:MAXIMUM: ZOOMOVERRIDE 0 does not allow override of the horizontal FastAcq maximum record length. HORIZONTAL:MODE:AUTOMATIC:FASTACQ: RECORDLENGTH:MAXIMUM:ZOOMOVERRIDE? might return HORIZONTAL:MODE:AUTOMATIC:FASTACQ:RECORDLENGTH: MAXIMUM:ZOOMOVERRIDE 1 indicating that override of the horizontal FastAcq maximum record length is allowed.
:HORizontal:MODe:MANual:CONFIGureset / query
Selects what changes automatically in Manual horizontal mode when the sample rate is adjusted. It can be set to either HORIZontalscale or RECORDLength.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HORIZontalscale | RECORDLength | Chooses whether horizontal scale or record length changes when sample rate is adjusted. |
HORIZONTAL:MODE:MANUAL:CONFIGURE RECORDLength
Sets or queries which horizontal manual setting is adjusted when the sample rate changes. HORIZontalscale and RECORDLength are the available choices.
enum - Returns the current manual configuration setting for sample-rate adjustment.
HORIZONTAL:MODE:MANUAL:CONFIGURE RECORDLength
:HORizontal:MODe:RECOrdlengthset / query
Sets or queries the record length. In Manual mode the record length can be changed; in Automatic mode it is read only.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | samples | Record length in samples. |
integer (samples) - Record length in samples.
HORIZONTAL:MODE:RECORDLENGTH 1000 sets the record length to 1000 samples. HORIZONTAL:MODE:RECORDLENGTH? might return HORIZONTAL:MODE:RECORDLENGTH 1000000, indicating that the record length is set to 1,000,000 samples.
Sets or queries the record length. The record length is given in samples; it is adjustable in Manual mode and read-only in Automatic mode.
| Name | Type | Values | Description |
|---|---|---|---|
| record length | integer | samples | Record length in samples. |
integer (samples) - Returns the record length in samples.
HORIZONTAL:MODE:RECORDLENGTH 1000 sets the record length to 1000 samples. HORIZONTAL:MODE:RECORDLENGTH? might return HORIZONTAL:MODE:RECORDLENGTH 1000000, indicating that the record length is set to 1,000,000 samples.
:HORizontal:MODe:SAMPLERateset / query
Sets or queries the sample rate.
| Name | Type | Values | Description |
|---|---|---|---|
| sample rate | real | samples per second | Sample rate in samples per second. |
Sets or queries the sample rate.
real (samples/s) - Returns the sample rate in samples per second.
:HORizontal:MODe:SCAleset / query
Sets or queries the horizontal scale.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | s/div | The horizontal scale in seconds per division. |
real (s/div) - Returns the horizontal scale in seconds per division.
HORIZONTAL:MODE:SCALE 2e-9 HORIZONTAL:MODE:SCALE?
Sets or queries the horizontal scale.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | s/div | Horizontal scale in seconds per division. |
real (s/div) - Returns the horizontal scale in seconds per division.
HORIZONTAL:MODE:SCALE 2e-9 HORIZONTAL:MODE:SCALE?
:HORizontal:POSitionset / query
Sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is on, the horizontal position is forced to 50%.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | 0 - ≈100 | Position of the trigger point on the screen, where 0 is the left edge and 100 is the right edge. |
HORIZONTAL:POSITION 10 HORIZONTAL:POSITION?
Sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is on, the horizontal position is forced to 50%.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | 0 - ≈100 | Position of the trigger point on the screen, where 0 is the left edge and 100 is the right edge. |
real (%) - Returns the trigger point displayed on the screen as a percent of screen width.
HORIZONTAL:POSITION 10 HORIZONTAL:POSITION?
Returns the display system preview state.
returns - Returns the display system preview state.
:HORizontal:RECOrdlengthset / query
Sets or queries the horizontal record length. To change the record length, the Horizontal Mode must be set to Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The horizontal record length. |
integer - Returns the horizontal record length in samples.
HORIZONTAL:RECORDLENGTH 1000 sets the record length to 1000 samples. HORIZONTAL:RECORDLENGTH? might return HORIZONTAL:RECORDLENGTH 1000000, indicating that the record length is set to 1,000,000 samples.
Sets or queries the horizontal record length. To change the record length, the Horizontal Mode must be set to Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The horizontal record length. |
integer (samples) - Returns the horizontal record length in samples.
HORIZONTAL:RECORDLENGTH 1000 HORIZONTAL:RECORDLENGTH?
:HORizontal:ROLL?query
Queries the horizontal roll mode status.
enum - Returns whether roll mode is active or inactive; the manual also notes that a 0 indicates roll mode is off and any other value activates roll mode.
:HORizontal:SAMPLERateset / query
Sets or queries the horizontal sample rate.
| Name | Type | Values | Description |
|---|---|---|---|
| sample rate | real | samples per second | The horizontal sample rate. |
real (samples per second) - Returns the current horizontal sample rate.
HORIZONTAL:SAMPLERATE 1e6 HORIZONTAL:SAMPLERATE?
Sets or queries the flag that allows override of the horizontal analyze minimum sample rate.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Allows or does not allow override of the horizontal analyze minimum sample rate. |
enum - Returns the current override state for the horizontal analyze minimum sample rate flag.
HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide OFF HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide?
Sets or queries the flag that allows override of the horizontal analyze minimum sample rate.
enum - Returns the override flag state: OFF or 0 means override is not allowed; ON or 1 means override is allowed.
HORIZONTAL:SAMPLERATE:ANALYZEMODE:MINIMUM:OVERRIDE OFF HORIZONTAL:SAMPLERATE:ANALYZEMODE:MINIMUM:OVERRIDE?
Sets or queries the horizontal sample rate.
real (samples per second) - Returns the current horizontal sample rate in samples per second.
HORIZONTAL:SAMPLERATE 1e6 HORIZONTAL:SAMPLERATE?
Sets or queries the minimum horizontal sample rate in analysis mode. The setter accepts either AUTOMATIC or a numeric value; the query returns the current setting.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | AUTOmatic | Select automatic minimum sample rate setting. |
| value | real | - | Minimum sample rate to set. |
enum - Returns the current minimum sample rate setting, or AUTOMATIC when the instrument automatically sets the minimum value.
HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue AUTOMATIC allows the instrument to set the minimum HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? might return HORIZONTAL:SAMPLERATE:ANALYZEMODE:MINIMUM:VALUE AUTOMATIC indicating the instrument automatically sets the minimum value.
Queries the minimum horizontal sample rate value used in analysis mode. The returned value may be AUTOMatic or a numeric NR3 sample-rate value.
enum - Returns the minimum sample-rate setting, either AUTOMatic or a numeric NR3 value indicating the minimum sample rate.
HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? might return HORIZONTAL:SAMPLERATE:ANALYZEMODE:MINIMUM:VALUE AUTOMATIC indicating the instrument automatically sets the minimum value.
:HORizontal:SCAleset / query
Sets or queries the horizontal scale. The value is the horizontal scale in time per division.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | s/div | Horizontal scale in time per division. |
real (s/div) - The current horizontal scale is returned.
HORIZONTAL:SCALE 20e-9 sets the horizontal scale to 20 ns/division. HORIZONTAL:SCALE? might return HORIZONTAL:SCALE 20e-9 indicating the horizontal scale is set to 20 ns/division.
:HORizontal:SCAle?query
Sets or queries the horizontal scale.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | - | Horizontal scale in time per division. |
real - The current horizontal scale is returned.
HORIZONTAL:SCALE 20e-9 sets the horizontal scale to 20 ns/division. HORIZONTAL:SCALE? might return HORIZONTAL:SCALE 20e-9 indicating the horizontal scale is set to 20 ns/division.
:HORIZONTAL:DELAY:MODEset / query
Sets the horizontal delay mode. The factory default value is 1.
:HORIZONTAL:DELAY:TIMEset / query
Sets the horizontal delay time. The factory default value is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | - | Delay time setting. |
:HORIZONTAL:POSITIONset / query
Sets the horizontal position. The factory default is 50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Horizontal position value. |
:HORIZONTAL:RECORDLENGTHset / query
Sets the horizontal record length. The factory default is 10000.
| Name | Type | Values | Description |
|---|---|---|---|
| recordlength | integer | - | Horizontal record length. |
:HOSTProcessor?query
Queries the host processor that the instrument displays.
string - String containing an indication of the processor in the unit.
:HSInterface:PORTset / query
Sets or queries the port that the high speed interface listens on.
| Name | Type | Values | Description |
|---|---|---|---|
| port | integer | - | Port number that the high speed interface listens on. |
HSInterface:PORT 5000 HSInterface:PORT?
:HSInterface:PORT?query
Sets or queries the port that the high speed interface listens on.
integer - Returns the current high speed interface port number.
HSInterface:PORT? might return HSInterface:PORT 5000, indicating the high speed interface port number is 5000.
:HSInterface:STATeset / query
Enables or disables the high speed interface.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Selects whether the high speed interface is disabled or enabled. |
HSInterface:STATe 1 enables the high speed interface. HSInterface:STATe? might return HSInterface:STATe 0, indicating the high speed interface is disabled.
:HSInterface:STATe?query
Enables or disables the high speed interface.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | Disables or enables the high speed interface. |
enum - Returns whether the high speed interface is enabled or disabled.
HSInterface:STATe 1 enables the high speed interface. HSInterface:STATe? might return HSInterface:STATe 0, indicating the high speed interface is disabled.
:HSInterface:TIMeoutset / query
Sets or queries the timeout for the high speed interface. If a client is waiting for data and no new data is acquired within the specified timeout, the high speed interface disconnects the client.
| Name | Type | Values | Description |
|---|---|---|---|
| timeout | integer | - | Timeout value for the high speed interface. |
Sets or queries the timeout for the high speed interface. If a client is waiting for data and no new data is acquired within the specified timeout, the high speed interface disconnects the client.
| Name | Type | Values | Description |
|---|---|---|---|
| timeout | integer | - | Timeout value for the high speed interface. |
:ID?query
Returns identifying information about the instrument and related firmware similar to *IDN?, but without the instrument serial number.
string - Identifying information for the instrument and related firmware, excluding the serial number.
ID? might return ID TEK/MSO54,CF:91.1CT,FV:1.2.0.2886, indicating that the instrument model number is set to MSO54, codes and formats is CF:91.1CT, and firmware version is FV:1.2.0.
:LICense?query
Returns all license parameters.
returns - Returns all license parameters.
:LICense:APPID?query
Returns a comma-separated list of the active application IDs. If a string argument is provided, it returns 0 or 1 depending on whether the string matches an active application ID.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | String to test against the active application IDs. |
enum - A comma-separated list of active application IDs, or 0/1 when queried with a string argument to indicate whether it matches an active application ID.
LIC:APPID? might return “BW5-2000, AFG, DVM, DJA”, which is a complete list of the active applications. LIC:APPID? “AFG” would return “1” because the app is active.
:LICense:COUNt?query
Returns the count of the number of active licenses installed.
integer - A count of the number of active licenses installed.
LICENSE:COUNT? might return LICENSE:COUNT 2 indicating that 2 active licenses are installed.
:LICense:ERRor?query
Returns all events and their messages, delimited by commas, and removes the returned events from the Event Queue. This command is an alias for ALLEV?.
string - All events and their messages, delimited by commas.
:LICense:GMT?query
Returns the GMT time in ISO 8601 format, the local date, 24 hour time, and the time-zone offset.
string - The GMT time in ISO 8601 format, the local date, 24 hour time, and the time-zone offset.
LICENSE:GMT? might return LICENSE:GMT "2016-05-23T17:05:10-07:00" indicating the local GMT time.
:LICense:INSTallset / query
Installs a license on the instrument from block data. Restarting the instrument may be necessary to fully activate additional capabilities.
| Name | Type | Values | Description |
|---|---|---|---|
| Block | block | - | The license in block data format. |
LICENSE:INSTALL #42312[Header] Version=1 Type="Enter"...
:LICense:LIST?query
Returns the active license nomenclatures as a comma-separated list of strings. Duplicate nomenclatures with different expiration dates are included.
string - The active license nomenclatures returned as a comma-separated list of strings.
:LICense:ITEM?query
Returns the details pertaining to a specific license. The NR1 argument is zero-indexed; if no argument is provided, zero is assumed.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 0 | Zero-indexed argument specifying a specific license. |
string - The details pertaining to a specific license.
LICENSE:ITEM? 0 might return "5-BW-1000,Fixed,2116-06-15T14:55:54-07:00,11870047,BW5-1000,1 GHz bandwidth on 5 series oscilloscopes"
:LICense:UNINSTALL?query
Returns the exit license indicated for the user to return to their TekAMS account. The license to uninstall may be specified by nomenclature or by TransactionID, and the exit-license is returned as block data.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | Nomenclature of an active license or a TransactionID identifying an active or previously uninstalled license. |
block - The exit-license returned as block data.
:LICense:HID?query
Returns the instrument HostID unique identifier.
string - The instrument HostID unique identifier.
LICENSE:HID? might return LICENSE:HID "TMS-9CS4US5SGJN6X".
:LICense:VALidate?query
Checks whether the specified license nomenclature is active and any required hardware is installed. Returns 1 if valid, or 0 if the license is inactive or required hardware is missing.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The license nomenclature to validate. |
boolean - True (1) if that nomenclature is active and any required hardware is installed; False (0) otherwise.
LICENSE:VALIDATE? "AFG" might return LICENSE:VALIDATE "AFG",0 indicating the license is not active.
:LOCkset / query
Enables or disables the touch screen and all front panel buttons and knobs. There is no front panel equivalent.
:LOCk?query
Enables or disables the touch screen and all front panel buttons and knobs. There is no front panel equivalent.
:LOCKset / query
Sets the front-panel lock state. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NONE | Front-panel lock state. |
:MAINWindow:BADGe:BRINgtoviewset / query
Automatically scrolls the specified badge into view so it is visible. The input is the badge title name.
| Name | Type | Values | Description |
|---|---|---|---|
| badge title name | string | - | Specifies a badge title name to make the badge visible. |
MAINWindow:BADGe:BRINgtoview "Meas 1" makes sure the Meas1 badge is shown in the RRB.
:MAINWindow:FONTSizeset / query
Sets the font size for UI text elements. Font size range is 12 to 20 points.
| Name | Type | Values | Description |
|---|---|---|---|
| font size | integer | 12 - 20 | Specifies the font size. |
:MAINWindow:RRBDisplaystateset / query
Sets the display state of the Results readout bar to ON or OFF.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | ON | 0 | OFF | Controls whether the Results readout bar is displayed. |
MAINWindow:RRBDisplaystate 1 expands (displays) the Results readout bar.
:MAINWindow:RRBIset / query
Selects a specified measurement badge.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the measurement badge; must be enclosed in quotes. |
MAINWindow:RRBI "meas9" selects the badge labeled as meas9.
:MASK:DELeteset / query
Deletes the specified mask test. The argument must be a quoted mask name formatted as "mask<x>".
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the mask test to delete. |
MASK:DELETE "mask2" will delete all mask segments of mask test 2.
Returns the total number of mask hits in all mask segments for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
integer - The total number of mask hits in all mask segments.
:MASK:MASK<x>:COUNT?query
Returns the total number of mask hits in all segments and the number of mask hits in each individual mask segment for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | string | - | Specifies the mask test. |
integer - <NR1> is the total number of mask hits in all segments and the number of mask hits in each individual mask segment.
Returns the total number of mask hits in the specified mask segment of the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
| SEG<x> | - | - | Specifies the mask segment. |
integer - The total number of mask hits in the specified mask segment.
MASK:MASK1:COUNT:SEG2:HITS? might return :MASK:MASK1:COUNT:SEG2:HITS 211, indicating 211 mask 1 hits in segment 2.
:MASK:MASK<x>:DEFinedbyset / query
Sets or queries whether the specified mask is defined by segments or tolerances. Segment masks are defined by one or more polygons; tolerance masks are defined by specified horizontal and vertical tolerances around the mask source.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask number. |
| mode | enum | SEGments | TOLerances | Selects whether the mask is defined by segments or by tolerances. |
enum - Returns whether the specified mask is defined by segments or tolerances.
Sets or queries whether the specified mask is defined by segments or tolerances. Segment masks are defined by one or more polygons; tolerance masks are defined by horizontal and vertical tolerances around the mask source.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SEGments | TOLerances | Defines the mask by segments or by tolerances. |
enum - Returns whether the specified mask is defined by segments or tolerances.
:MASK:MASK<x>:DISplayset / query
Sets or queries the display state of the mask used for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Display state of the specified mask. |
MASK:MASK1:DISPLAY OFF disables the display of the mask used by mask test 1. MASK:MASK1:DISPLAY? might return MASK:MASK1:DISPLAY OFF, indicating the display state for mask test 1 is off.
Sets or queries the display state of the mask used for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask test. |
| state | enum | ON | OFF | Sets the display state of the specified mask to on or off. |
enum - Returns the display state of the specified mask test.
MASK:MASK1:DISPLAY OFF disables the display of the mask used by mask test 1. MASK:MASK1:DISPLAY? might return MASK:MASK1:DISPLAY OFF, indicating the display state for mask test 1 is off.
:MASK:MASK<x>:LIST?query
Queries the list of segments in the mask used by the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
string - A comma separated list of segment names.
:MASK:MASK<x>:SEG<x>:POINTSset / query
Sets or queries the X/Y coordinates of all points in the designated mask segment. The set form defines new points in the mask, replacing any existing points.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | integer | - | Specifies the mask test. |
| SEG<x> | integer | - | Specifies the mask segment. |
string - Returns the X/Y coordinates of all the points in the designated mask segment.
MASK:MASK1:SEG1:POINTS "-40E-9,-200E-3,0,0,-40E-9,0" MASK:MASK1:SEG1:POINTS?
Sets or queries the X/Y coordinates of all points in the designated mask segment. The set form defines new points in the mask, replacing any existing points.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
| SEG<x> | - | - | Specifies the mask segment. |
string - Returns the X/Y coordinates of all the points in the specified mask segment, in time/volts.
MASK:MASK1:SEG1:POINTS "-40E-9,-200E-3,0,0,-40E-9,0" MASK:MASK1:SEG1:POINTS?
:MASK:MASK<x>:SOUrceset / query
Sets or queries the analog source for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | RFvsTime | Analog source for the mask test. |
Sets or queries the analog source for the specified mask test.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | RFvsTime | Analog source for the mask test. |
:MASK:MASK<x>:TESt:CTHResholdset / query
Sets or queries the number of consecutive waveform violations needed for the specified mask test to change from PASS to FAIL.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | string | - | Specifies the mask test. |
| threshold | integer | - | Specifies the threshold value. |
integer - Returns the threshold value, indicating the number of consecutive waveform violations required for the specified mask test to fail.
MASK:MASK1:TEST:CTHRESHOLD 5 MASK:MASK1:TEST:CTHRESHOLD?
Sets or queries the number of consecutive waveform violations needed for the specified mask test to change from PASS to FAIL.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | integer | - | Number of consecutive waveform violations required for the mask test to fail. |
integer - Returns the threshold value for the specified mask test.
MASK:MASK1:TEST:CTHRESHOLD 5 MASK:MASK1:TEST:CTHRESHOLD?
:MASK:MASK<x>:TESt:STATEset / query
Sets or queries the state of the specified mask test. Turning the state ON resets Pass/Fail status and hit count information and starts the mask test; OFF stops it when complete.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Mask test state. |
enum - Returns the current mask test state.
Sets or queries the state of the specified mask test. When set to ON, the Pass/Fail status and hit count are reset and the mask test is started; OFF stops the mask test when it completes.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Mask test state. |
MASK:MASK1:TEST:STATE {ON|OFF}
MASK:MASK1:TEST:STATE?Returns the status of the specified mask test. The status can be PASSING, FAILING, PASSED, or FAILED.
enum - Returns the mask test status.
MASK:MASK1:TEST:STATUS? might return MASK:MASK1:TEST:STATUS PASSED, indicating mask test 1 passed.
:MASK:MASK<x>:TESt:THResholdset / query
Sets or queries the number of waveform violations needed for the specified mask test to change from PASS to FAIL.
| Name | Type | Values | Description |
|---|---|---|---|
| x | - | - | Specifies the mask test. |
| value | integer | - | Threshold value. |
returns
MASK:MASK1:TEST:THRESHOLD 10 sets the number of waveform violations to 10 for mask test 1 to fail.
Sets or queries the number of waveform violations needed for the specified mask test to change from PASS to FAIL.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask test. |
| value | integer | - | Specifies the threshold value. |
MASK:MASK1:TEST:THRESHOLD 10 sets the number of waveform violations to 10 for mask test 1 to fail.
:MASK:MASK<x>:TOLerance:HABSoluteset / query
Sets or queries the mask horizontal tolerance in absolute units of seconds. The value is used when the mask type is set to absolute and the UPDatenow command is sent.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask number. |
| tolerance | real | s | Tolerance in seconds. |
real (s) - Returns the mask horizontal tolerance in absolute units of seconds.
MASK:MASK1:TOLerance:HABSolute 1.5e-9 MASK:MASK2:TOLerance:HABSolute?
Sets or queries the mask horizontal tolerance in absolute units of seconds. The value is used when the mask TTYPe is set to ABSolute and the UPDatenow command is sent.
| Name | Type | Values | Description |
|---|---|---|---|
| mask<x> | - | - | Specifies the mask number. |
| nr3 | real | the equivalent of one horizontal graticule division | Tolerance in units of seconds. |
real (s) - The horizontal tolerance of the specified mask, in seconds.
MASK:MASK1:TOLerance:HABSolute 1.5e-9 MASK:MASK2:TOLerance:HABSolute?
:MASK:MASK<x>:TOLerance:HORizontalset / query
Sets or queries the mask horizontal tolerance. The mask is not recalculated until an UPDatenow command is sent.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the mask number. |
| tolerance | real | s | Tolerance in units of seconds. |
real (s) - Returns the mask horizontal tolerance in seconds.
MASK:MASK1:TOLerance:HORizontal 1.5e-9 MASK:MASK2:TOLerance:HORizontal?
Sets or queries the mask horizontal tolerance. The value is used when the mask TTYPe is set to ABSolute and the UPDatenow command is sent.
real (s) - Returns the current mask horizontal tolerance in seconds.
MASK:MASK1:TOLerance:HORizontal 1.5e-9 MASK:MASK2:TOLerance:HORizontal?
:MASK:MASK<x>:TOLerance:UPDatenowset / query
Causes the tolerance mask to be recalculated with the current horizontal and vertical tolerances. Requires the MTM option.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | - | - | Specifies the mask test. |
MASK:MASK1:TolErance:UPDatenow recalculates the tolerance of mask 1 with the current horizontal and vertical tolerance settings.
:MASK:MASK<x>:TOLerance:VABSoluteset / query
Sets or queries the mask vertical tolerance in absolute units of the mask source, generally volts. The value is used when the mask TTYPe is set to ABSolute and the UPDatenow command is sent.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1 division | Mask vertical tolerance in absolute units. |
real - Returns the mask vertical tolerance in absolute units of the mask source, generally volts.
Sets or queries the mask vertical tolerance in absolute units of the mask source, generally volts. The value is used when the mask type is set to ABSolute and UPDatenow is sent.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1 | Tolerance in units of graticule divisions. |
real (V) - Returns the mask vertical tolerance in absolute units of the mask source, generally volts.
MASK:MASK1:TOLerance:VABSolute .200 MASK:MASK1:TOLerance:VABSolute?
:MASK:MASK<x>:TOLerance:VERTicalset / query
Sets or queries the vertical tolerance for the specified mask. The tolerance is expressed in graticule divisions, with a maximum of 1 division.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1 | Vertical tolerance in units of graticule divisions. |
real (divisions) - Returns the vertical tolerance of the specified mask in graticule divisions.
MASK:MASK1:TOLerance:VERTical .100 MASK:MASK1:TOLerance:VERTical?
Sets or queries the mask vertical tolerance. The value is specified in graticule divisions and the maximum is 1 division.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Mask number. |
| tolerance | real | 1 | Vertical tolerance in graticule divisions. |
returns
MASK:MASK1:TOLerance:VERTical .100 MASK:MASK1:TOLerance:VERTical?
:MASK:MASK<x>:TTYPeset / query
Sets the type of tolerance values used when defining a tolerance mask.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | SCReen | ABSolute | Tolerance value type used for the mask. |
:MASK:MASK<x>:TTYPe?query
Returns the mask tolerance type for the specified mask test. SCReen indicates screen-relative graticule division tolerances, and ABSolute indicates tolerances in the mask source waveform units.
| Name | Type | Values | Description |
|---|---|---|---|
| MASK<x> | discrete | - | Specifies the mask test. |
enum - Returns the mask tolerance type for the specified mask test.
MASK:MASK1:TTYPE ABSOLUTE specifies that the horizontal and vertical tolerances for Mask1 are specified in absolute s and V units. MASK:MASK2:TTYPE? might return MASK:MASK2:TTYPE SCReen, indicating that the horizontal and vertical tolerances for Mask2 are defined in screen-relative graticule division units
:MASK:TESt:WAVEformsset / query
Sets or queries the number of waveform acquisitions to test during mask testing. The setting applies to all mask tests.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | - | Number of waveform acquisitions to test. |
integer - Returns the number of waveform acquisitions to test.
MASK:TEST:WAVEFORMS 1k MASK:TEST:WAVEFORMS?
Sets or queries the number of waveform acquisitions to test during mask testing. The number of waveforms applies to all mask tests.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Specifies the number of waveform acquisitions. |
integer - Returns the number of waveform acquisitions to test.
MASK:TEST:WAVEFORMS 1k MASK:TEST:WAVEFORMS?
:MATHArbflt<x>:FILepathset / query
Sets the file path for a file of filter coefficients for the specified arbitrary filter. Setting a path reads that file and loads the filter for ARBFLT<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Path to the file of filter coefficients. |
MATHARBFLT8:FILEPATH "C:/myfilters/20mhz.flt" MATHARBFLT1:FILEPATH?
Sets the file path for a file of filter coefficients for the specified arbitrary filter. Setting a path reads that file and loads the filter for ARBFLT<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Path to the file of filter coefficients. |
string - Returns the current file path for the filter coefficients file.
MATHARBFLT8:FILEPATH "C:/myfilters/20mhz.flt" reads filter coefficients from the file and loads the filter for ARBFLT8. MATHARBFLT1:FILEPATH? might return MATHARBFLT1:FILEPATH "C:\Users\Public\Tektronix\TekScope\Math Arbitrary Filters\LowPass-Norm\lowpass_0.bw.flt",
:MEASTABle:ADDNewset / query
Adds a new measurement results view table to the scope application. The table can be named through the argument sent to the command.
| Name | Type | Values | Description |
|---|---|---|---|
| name | string | - | Specifies a new measurement results view table to add to the scope application. |
MEASTABle:ADDNew "TABLE1" adds a new table view by name TABLE1.
:MEASTABle:DELETEset / query
Removes a requested measurement results view table from the scope application.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies a measurement results view table to remove. |
MEASTABle:DELETE "TABLE1" removes TABLE1 from the view.
:NEWpassset / query
Changes the password used to access password-protected data. The PASSWord command must be successfully executed before using this command, or an execution error occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The new password, up to 10 characters. |
NEWPASS"mypassword" creates a new password (mypassword) for accessing your protected data.
:PASSWordset / query
Enables the *PUD and NEWpass set commands when a password is provided. Sending PASSWord with no arguments disables those commands; the password is case sensitive.
:PAUSeset / query
Causes the interface to pause for the specified number of seconds before processing any other commands.
| Name | Type | Values | Description |
|---|---|---|---|
| pause | real | > 0.0 - ≥1800.0 | Number of seconds the interface is to pause before processing any other commands. |
PAUSE 10.0e0;:ACQUIRE:NUMACQ
:PEAKSTABle:ADDNewset / query
Adds the specified peak markers table. The argument is a quoted string naming the new table, in the form "TABLE<NR1>" with <NR1> 1.
| Name | Type | Values | Description |
|---|---|---|---|
| name | string | - | Name of the new peak markers table. |
PEAKSTABLE:ADDNEW "Table1"
:PEAKSTABle:DELeteset / query
Deletes the specified peak markers table.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string name of the peak markers table to delete, in the form "TABLE<NR1>" where <NR1> ≥ 1. |
PEAKSTABLE:DELETE "Table1" deletes peak markers table, Table1.
:PEAKSTABle:LIST?query
Returns a list of all currently defined peak markers tables.
string - A list of all currently defined peak markers tables.
PEAKSTABLE:LIST? might return PEAKSTABle:LIST TABLE1, indicating TABLE1 is currently the only defined peak markers table.
:PEAKSTABle:TABle<x>:FRESolutionset / query
Sets or queries the Frequency Resolution state for a peak markers table. AUTO shows the frequency with the same precision as shown in the Spectrum View display; PRECISE shows the frequency down to single Hz resolution.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | PRECISE | Frequency resolution state for the peak markers table. |
enum - Returns the Frequency Resolution state for the specified peak markers table.
PEAKSTABle:TABle1:FRESolution AUTO sets Frequency Resolution to Auto.
Sets or queries the Frequency Resolution state for a peak markers table. AUTO shows the frequency with the same precision as shown in the Spectrum View display, and PRECISE shows the frequency down to single Hz resolution.
enum - Returns the Frequency Resolution state for the specified peak markers table.
PEAKSTABle:TABle1:FRESolution AUTO sets Frequency Resolution to Auto.
:PILOGger:FILENameset / query
Sets or queries the location where the programmatic interface command log will be saved. If no path is entered, the instrument uses the current working directory set in FILESystem:CWD.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string defining the file path in the form '[<path>]<filename.ext>'. |
string - Returns the configured command log file location as a quoted string path.
PILOGger:FILEName "C:/Users/Tek_Local_Admin/Tektronix/TekScope/piCmdLog.txt" PILOGger:FILEName?
:PILOGger:FILEName?query
Sets or queries the file location where the programmatic interface command log is saved. If no path is entered, the instrument searches the current working directory set in FILESystem:CWD.
string - Returns the file path for the PI command log, in the format '[<path>]<filename.ext>'.
PILOGger:FILEName? might return PILOGger:FILEName "command_log.txt", indicating the PI command log will be saved in the current working directory with the file name command_log.txt.
:PILOGger:STATEset / query
Sets or queries the state of the programmatic interface command log. If the log file location does not exist or is not writable, turning the logger on fails and the state is set to 0 (OFF).
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Logger state; 0 or OFF disables the PI command logger, and ON enables it. |
enum - Returns the current PI command logger state.
:PILOGger:STATE?query
Sets or queries the state of the programmatic interface command log. If the log file location does not exist or is not writable, attempts to turn the logger ON fail and the state is set to 0 (OFF).
enum - Returns the PI command logger state.
:POWer:ADDNewset / query
Adds a power measurement badge and selects Switching Loss measurement by default.
| Name | Type | Values | Description |
|---|---|---|---|
| POWER<x> | string | - | Specifies the power measurement number to add. |
POWER:ADDNEW "POWER1" adds POWER1 measurement badge and selects Switching Loss measurement by default.
:POWer:DELeteset / query
Deletes the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | string | - | The power measurement number to delete. |
POWER:DELETE "POWER1" deletes the POWER1 measurement badge.
:POWer:POWer<x>:AUTOSetset / query
Executes power autoset for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| execute | enum | EXECute | Execution trigger for the autoset operation. |
POWer:POWer1:AUTOSet EXECute executes the power autoset for the power measurement Power 1.
:POWer:POWer<x>:CLRESPONSE:AMP<x>Valset / query
Sets or queries the generator amplitude value for the specified configuration step in the Control Loop Response power measurement. Requires option 5-PWR or 6-PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | 1 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| amp<x> | integer | 1 - 10 | Configuration step number. |
| value | real | -100 - 100 | Generator amplitude for the specified configuration step. |
real (V) - Returns the generator output amplitude setting for the specified configuration step.
POWer:POWer1:CLRESPONSE:AMP3Val 20 POWer:POWer2:CLRESPONSE:AMP8Val?
Sets or queries the generator amplitude value of the specified configuration step for the Control Loop Response power measurement. The configuration step number is in the range 1 to 10, and the amplitude value is in the range −100 V to 100 V.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| AMP<x> | integer | 1 - 10 | Configuration step number. |
| value | real | -100 V - 100 V | Generator amplitude for the specified configuration step. |
real (V) - Returns the generator output amplitude setting for the specified configuration step.
POWer:POWer1:CLRESPONSE:AMP3Val 20 POWer:POWer2:CLRESPONSE:AMP8Val?
:POWer:POWer<x>:CLRESPONSE:ANALYSISMethodset / query
Sets or queries the Analysis Method for Control Loop Response measurement. The available methods are Spectrum View Average, Spectrum View Normal, and FFT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SVAVG | SVNORMAL | FFT | Selects the analysis method. |
POWer:POWer1:CLRESPONSE:ANALYSISMethod SVNORMAL sets the Analysis Method as Spectrum View Normal for power measurement 1.
Sets or queries the Analysis Method for Control Loop Response measurement.
enum - Returns the Analysis Method for the specified power measurement.
POWer:POWer1:CLRESPONSE:ANALYSISMethod SVNORMAL sets the Analysis Method as Spectrum View Normal for power measurement 1.
:POWer:POWer<x>:CLRESPONSE:AUTORbwset / query
Enables or disables Auto RBW computation for the specified power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| state | enum | True | False | Enables or disables Auto RBW computation. |
POWer:POWer1:CLRESPONSE:AUTORbw true enables Auto RBW computation. POWer:POWer1:CLRESPONSE:AUTORbw? might return POWer:POWer1:CLRESPONSE:AUTORbw true, indicating that Auto RBW computation is enabled.
Enables or disables Auto RBW computation for the specified power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown in the UI for the power measurement badge. |
POWer:POWer1:CLRESPONSE:AUTORbw? might return POWer:POWer1:CLRESPONSE:AUTORbw true, indicating that Auto RBW computation is enabled.
Queries the connection status to the external generator used with the specified Control Loop Response power measurement.
enum - Indicates the connection status to the external generator.
:POWer:POWer<x>:CLRESPONSE:CONSTAMPlitudeset / query
Sets or queries the constant amplitude voltage for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| voltage | real | –100 - 100 | Constant amplitude voltage value for the measurement. |
real (V) - Returns the constant amplitude voltage for the specified power measurement.
POWer:POWer3:CLRESPONSE:CONSTAMPlitude 120 POWer:POWer5:CLRESPONSE:CONSTAMPlitude?
Sets or queries the constant amplitude voltage for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | - | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| voltage | real | –100 - 100 | Constant amplitude voltage value for the measurement. |
real (V) - The constant amplitude voltage for the specified power measurement.
POWer:POWer3:CLRESPONSE:CONSTAMPlitude 120 POWer:POWer5:CLRESPONSE:CONSTAMPlitude?
:POWer:POWer<x>:CLRESPONSE:FREQ<x>Valset / query
Sets or queries the generator frequency value of the specified configuration step for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| FREQ<x>Val | real | 10 - 50 MHz | Frequency value for the specified configuration step number. |
Sets or queries the generator frequency value of the specified configuration step for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 - 11 | Power measurement number; this is the equivalent of the number shown in the UI for a power measurement badge. |
| FREQ<x> | integer | 1 - 11 | Configuration step number. |
| value | real | 10 Hz - 50 MHz | Frequency of the specified configuration step number. |
:POWer:POWer<x>:CLRESPONSE:GENIPADDressset / query
Sets or queries the IP address of the external generator used with the specified Control Loop Response measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR2> | string | - | The IP address of the generator. |
:POWer:POWer<x>:CLRESPONSE:GENeratorset / query
Sets or queries the generator source for the specified Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | INTernal | EXTernal | Sets the generator source for the Control Loop Response power measurement. |
POWer:POWer1:CLRESPONSE:GENerator Internal sets the internal generator as the source for the Control Loop Response measurement. POWer:POWer1:CLRESPONSE:GENerator? might return EXTERNAL, indicating that the Control Loop Response measurement is set to use an external generator.
Sets or queries the generator source for the specified Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | 1 | The number of the power measurement. |
| mode | enum | INTernal | EXTernal | Selects the internal or external generator as the source for the Control Loop Response power measurement. |
enum - Returns the selected generator source for the Control Loop Response power measurement.
POWer:POWer1:CLRESPONSE:GENerator Internal sets the internal generator as the source for the Control Loop Response measurement. POWer:POWer1:CLRESPONSE:GENerator? might return EXTERNAL, indicating that the Control Loop Response measurement is set to use an external generator.
Returns the IP address of the external generator associated with the specified Control Loop Response power measurement. If no address is set, it may return an empty string.
string - Returns the IP address of the external generator, or an empty string if no address is set.
POWer:POWer4:CLRESPONSE:GENIPADDress 127.1.1.1 POWer:POWer1:CLRESPONSE:GENIPADDress?
:POWer:POWer<x>:CLRESPONSE:IMPEDanceset / query
Sets or queries the vertical termination impedance for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number; equivalent to the number shown in the UI for a power measurement badge. |
| impedance | enum | FIFTy | HIGHZ | Sets the termination impedance to 50 Ω or 1 MΩ. |
enum - Returns the current vertical termination impedance for the Control Loop Response power measurement.
POWer:POWer3:CLRESPONSE:IMPEDance FIFTy POWer:POWer2:CLRESPONSE:IMPEDance? might return HIGHZ, indicating that the vertical termination impedance for power measurement 2 is 1 MΩ.
Sets or queries the vertical termination impedance for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | - | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| impedance | enum | FIFTy | HIGHZ | Vertical termination impedance setting: FIFTy sets 50 Ω and HIGHZ sets 1 MΩ. |
enum - Returns the current vertical termination impedance for the Control Loop Response power measurement.
POWer:POWer3:CLRESPONSE:IMPEDance FIFTy POWer:POWer2:CLRESPONSE:IMPEDance?
:POWer:POWer<x>:CLRESPONSE:INPUTSOurceset / query
Sets or queries the input source for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Channel to use for the output signal source. |
Sets or queries the output source for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Output source channel to use for the Control Loop Response power measurement. |
POWer:POWer2:CLRESPONSE:OUTPUTSOurce CH8 POWer:POWer2:CLRESPONSE:OUTPUTSOurce?
:POWer:POWer<x>:CLRESPONSE:MONset / query
Sets or returns the measure on for the control loop response, PSRR, or impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAVG | SSEQ | Specifies the measure analysis method for the Control Loop Response/PSRR or Impedance measurement. |
enum - Returns the current measure analysis method for the Control Loop Response/PSRR or impedance measurement.
Sets or returns the measure on for the control loop response, PSRR, or impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAVG | SSEQ | Selects the measure analysis method for the Control Loop Response/PSRR or Impedance measurement. |
enum - Returns the current measure analysis method for the Control Loop Response, PSRR, or impedance measurement.
POWer:POWer2:CLRESPONSE:MON SSEQ POWer:POWer2:CLRESPONSE:MON?
:POWer:POWer<x>:CLRESPONSE:OUTPUTSOurceset / query
Sets or queries the output source for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| output source | channel_list | - | Channel to use as the output source for the Control Loop Response power measurement. |
Returns the output signal source for the Control Loop Response power measurement. The source is the channel waveform selected for the measurement.
enum - Returns the channel output source, such as a channel waveform identifier.
POWer:POWer1:CLRESPONSE:OUTPUTSOurce CH5 POWer:POWer3:CLRESPONSE:OUTPUTSOurce?
:POWer:POWer<x>:CLRESPONSE:PPDset / query
Sets or queries the points per decade (PPD) value for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| PPD value | integer | 10 - 100 | PPD value for the measurement, in points. |
integer - Returns the PPD value for the power measurement, in points.
POWer:POWer3:CLRESPONSE:PPD 30 POWer:POWer5:CLRESPONSE:PPD?
Sets or queries the points per decade (PPD) value for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| ppd | integer | 10 - 100 | PPD value for the measurement. |
integer (points) - Returns the PPD value for the specified power measurement.
POWer:POWer3:CLRESPONSE:PPD 30 POWer:POWer5:CLRESPONSE:PPD?
:POWer:POWer<x>:CLRESPONSE:SPAN<x>Valset / query
Sets or queries the span value for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| span<x>Val | real | 10 - 100 | Span value for the Power FRA measurement. |
real - Returns the span value for the selected Power FRA measurement.
Sets or queries the span value for CLRRESPONSE. The span number is x, and the value is given as an NR3 number.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | kHz | Span value for CLRRESPONSE. |
real (kHz) - Returns the span value for CLRRESPONSE, reported with the command prefix and the value.
POWer:POWer<x>:CLRESPONSE:SPAN1Val 2 sets the span value to 2 kHz. POWer:POWer<x>:CLRESPONSE:SPAN1Val? might return POWer:POWer<x>:CLRESPONSE:SPAN1Val 2, indicating that the span value is 2 kHz.
:POWer:POWer<x>:CLRESPONSE:SPRofileset / query
Sets or queries the sweep profile for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | CUSTOM | Sweep profile setting. |
enum - Returns the current sweep profile.
POWer:POWer1:CLRESPONSE:SPRofile CUSTOM POWer:POWer1:CLRESPONSE:SPRofile?
Sets or queries the sweep profile for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | - | - | Power measurement number. |
| mode | enum | AUTO | CUSTOM | Sweep profile selection. |
enum - Returns the current sweep profile.
POWer:POWer1:CLRESPONSE:SPRofile CUSTOM sets the sweep profile to custom. POWer:POWer1:CLRESPONSE:SPRofile? might return POWer:POWer1:CLRESPONSE:SPRofile AUTO, indicating that sweep profile is auto.
:POWer:POWer<x>:CLRESPONSE:STARTFREQuencyset / query
Sets or queries the start frequency value for the Control Loop Response power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | - | Start frequency value. |
Returns the starting frequency for the Control Loop Response power measurement. The value is in the range of 10 Hz to 50 MHz.
integer (Hz) - The starting frequency for the measurement, in Hz.
POWer:POWer8:CLRESPONSE:STARTFREQuency 12 POWer:POWer3:CLRESPONSE:STARTFREQuency? might return 2400
:POWer:POWer<x>:CLRESPONSE:STOPFREQuencyset / query
Sets or queries the stop frequency value for the Control Loop Response power measurement. The value is the stop frequency for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| stop frequency | real | 10 Hz - 50 MHz | Stop frequency for the measurement. |
real (Hz) - Returns the stop frequency for the specified control loop response power measurement.
POWer:POWer8:CLRESPONSE:STOPFREQuency 120 sets the stop frequency for the control loop response power measurement 8 to be 102 Hz. POWer:POWer3:CLRESPONSE:STOPFREQuency? might return 2000, indicating that the starting frequency for power measurement 5 is 2000 Hz.
Sets or queries the stop frequency value for the Control Loop Response power measurement. The stop frequency is in the range of 10 Hz to 50 MHz.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 10 Hz - 50 MHz | Stop frequency for the measurement. |
real (Hz) - Returns the stop frequency for the specified Control Loop Response power measurement.
POWer:POWer8:CLRESPONSE:STOPFREQuency 120 POWer:POWer3:CLRESPONSE:STOPFREQuency?
:POWer:POWer<x>:CLRESPONSE:TESTCONNectionset / query
Tests the connection to the external generator used with the specified Control Loop Response power measurement. This is a setter-only command with no query form.
| Name | Type | Values | Description |
|---|---|---|---|
| execute | enum | EXECute | Executes the connection test. |
:POWer:POWer<x>:CYCLEAmp:INPUTSOurceset / query
Sets or queries the input source for cycle amplitude measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle amplitude measurement. |
POWer:POWer1:CYCAmp:INPUTSOurce CH1 sets the input source for cycle amplitude measurement as CH1 for the power measurement badge Power 1.
:POWer:POWer<x>:CYCLEBase:INPUTSOurceset / query
Sets or queries the input source for cycle base measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle base measurement. |
enum - Returns the input source for the cycle base measurement.
:POWer:POWer<x>:CYCLEMAX:INPUTSOurceset / query
Sets or queries the input source for the cycle maximum measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle maximum measurement. |
enum - Returns the current input source for the cycle maximum measurement.
POWer:POWer1:CYCMAX:INPUTSOurce CH2 sets the input source for cycle maximum measurement as CH2 for the power measurement badge Power 1.
:POWer:POWer<x>:CYCLEMin:INPUTSOurceset / query
Sets or queries the input source for cycle minimum measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle minimum measurement. |
enum - Returns the input source for the cycle minimum measurement.
:POWer:POWer<x>:CYCLEPKPK:INPUTSOurceset / query
Sets or queries the input source for cycle peak-to-peak measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 - 8 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle peak-to-peak measurement. |
POWer:POWer1:CYCLEPKPK:INPUTSOurce REF1 sets the input source for cycle peak-to-peak measurement as REF1 for the power measurement badge Power 1.
:POWer:POWer<x>:CYCLETop:INPUTSOurceset / query
Sets or queries the input source for the cycle top measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the cycle top measurement. |
POWer:POWer1:CYCLEPKPK:CYCLETop REF3 sets the input source for cycle top measurement as REF3 for the power measurement badge Power 1.
:POWer:POWer<x>:DIDT:INPUTSOurceset / query
Sets or queries the input source for di/dt measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the di/dt measurement. |
POWer:POWer1:DIDT:INPUTSOurce CH6 sets the input source for di/dt measurement as channel 2.
:POWer:POWer<x>:DIDT:SOURCEEDGETypeset / query
Sets or queries the edge type for di/dt measurement for the specified power measurement number.
:POWer:POWer<x>:DVDT:INPUTSOurceset / query
Sets or queries the input source for the dv/dt measurement of the specified power measurement number. The source can be a channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the dv/dt measurement. |
POWer:POWer1:DVDT:INPUTSOurce CH1 sets the input source for dv/dt measurement as channel 1.
:POWer:POWer<x>:DVDT:SOURCEEDGETypeset / query
Sets or queries the edge type for dv/dt measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| edge type | enum | RISE | FALL | Selects the dv/dt edge type. |
POWer:POWer1:DVDT:SOURCEEDGEType RISE sets the edge type as rise for the dv/dt measurement.
:POWer:POWer<x>:EFFICIENCY:INPUTTypeset / query
Sets or queries the input type for the specified power efficiency measurement. The input voltage type can be AC or DC.
| Name | Type | Values | Description |
|---|---|---|---|
| pow<x> | integer | 1 | Power measurement number, equivalent to the number shown on the power measurement badge of the UI. |
| type | enum | AC | DC | Input voltage type. |
enum - Returns the input voltage type for the specified power efficiency measurement.
POWer:POWer1:EFFICIENCY:INPUTType DC POWer:POWer2:EFFICIENCY:INPUTType?
:POWer:POWer<x>:EFFICIENCY:IOUT1SOUrceset / query
Sets or queries the output 1 current source for the power Efficiency measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 - 8 | The number of a power efficiency measurement; this is the equivalent of the number shown on the power measurement badge of the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the output 1 current efficiency measurement. |
enum - Returns the selected output 1 current source for the power Efficiency measurement.
POWer:POWer1:EFFICIENCY:IOUT1SOUrce CH4 sets the source for the output 1 current efficiency measurement of power measurement 1 to Channel 4. POWer:POWer1:EFFICIENCY:IOUT1SOUrce? might return CH6, indicating that the source for the output 1 current efficiency measurement of power measurement 1 is Channel 6.
:POWer:POWer<x>:EFFICIENCY:ISOUrceset / query
Sets or queries the current source for the power Efficiency measurement of the specified power measurement number.
POWer:POWer3:EFFICIENCY:ISOUrce POWer:POWer1:EFFICIENCY:ISOUrce?
:POWer:POWer<x>:EFFICIENCY:NUMOFOutputsset / query
Sets or queries the number of outputs for the power Efficiency measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | TWO | THREE | Sets the number of outputs to test in the power efficiency measurement. |
enum - Returns the number of outputs being measured for the specified power efficiency measurement.
POWer:POWer4:EFFICIENCY:NUMOFOutputs TWO POWer:POWer3:EFFICIENCY:NUMOFOutputs?
:POWer:POWer<x>:EFFICIENCY:OUTPUT1Typeset / query
Sets or queries the output type (AC or DC) for the specified power efficiency measurement. The manual’s syntax line shows AC or DC as the only allowed values.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | Number of the power efficiency measurement, equivalent to the number shown on the power measurement badge in the UI. |
| type | enum | AC | DC | Selects whether the output type is AC or DC. |
:POWer:POWer<x>:EFFICIENCY:VOUT1SOUrceset / query
Sets or queries the output 1 voltage source for the specified power efficiency measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| powermx | integer | 1 | Power efficiency measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source for output 1 of the power efficiency measurement. |
enum - Returns the current output 1 voltage source for the specified power efficiency measurement.
POWer:POWer4:EFFICIENCY:VOUT1SOUrce CH4 POWer:POWer1:EFFICIENCY:VOUT1SOUrce? might return CH3, indicating that the source for the output 1 voltage efficiency measurement of power measurement 1 is Channel 3.
:POWer:POWer<x>:EFFICIENCY:VSOUrceset / query
Sets or queries the voltage source for the power Efficiency measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | The number of a power efficiency measurement; equivalent to the number shown in the power measurement badge on the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the input voltage source. |
enum - Returns the current input voltage source for the specified power Efficiency measurement.
POWer:POWer2:EFFICIENCY:VSOUrce CH4 POWer:POWer1:EFFICIENCY:VSOUrce? might return CH3, indicating that the input voltage source for power Efficiency measurement 1 is Channel 3.
:POWer:POWer<x>:FREQUENCY:EDGeset / query
Sets or queries the edge type for the frequency measurement of the specified power measurement number.
:POWer:POWer<x>:FREQUENCY:INPUTSOurceset / query
Sets or queries the input source for frequency measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | 1 - 8 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the frequency measurement. |
enum - Returns the current input source for the specified power measurement number.
POWer:POWer1:FREQUENCY:INPUTSOurce REF1 sets the input source for frequency measurement as REF1.
:POWer:POWer<x>:GATingset / query
Sets or queries the gating type for the specified power measurement number.
:POWer:POWer<x>:GATing:GLOBalset / query
Sets or queries whether the specified power measurement uses global or local gating settings. Requires option PWR or PS2.
:POWer:POWer<x>:HARMONICS:CLASsset / query
Sets or queries the class type for the harmonics measurement in the specified power measurement number x.
| Name | Type | Values | Description |
|---|---|---|---|
| class | enum | CLASSA | CLASSB | CLASSC | CLASSD | Class type for the harmonics measurement. |
enum - Returns the class type for the harmonics measurement.
POWer:POWer1:HARMONICS:CLASs CLASSB
:POWer:POWer<x>:HARMONICS:CLFileset / query
Sets or queries the custom limits file path for the harmonics measurement in the specified power measurement number. The path can be loaded when the harmonics standard type selected is CUSTom.
| Name | Type | Values | Description |
|---|---|---|---|
| path | string | - | Custom limits file path. |
string - Returns the custom limits file path.
POWer:POWer1:HARMONICS:CLFile "C:/Applications/Power/Harmonics Limits/userdefineslimits.csv" POWer:POWer1:HARMONICS:CLFile?
:POWer:POWer<x>:HARMONICS:CMEThodset / query
Sets or queries the harmonics current method for the specified power measurement number. Rated uses the standard input current values; Measured uses the measured input current values.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 6 | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
| method | enum | RATed | MEASured | Selects whether harmonics measurement uses standard input current values or measured input current values. |
enum - Returns the current harmonics current method for the specified power measurement number.
POWer:POWer1:HARMONICS:CMEThod RATed sets the current method for harmonics measurement as rated.
:POWer:POWer<x>:HARMONICS:FUNDCURRentset / query
Sets or queries the fundamental current value for the harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| current | real | 0 - 16 | Fundamental current value for the harmonics measurement. |
real - Returns the fundamental current value for the harmonics measurement.
POWer:POWer1:HARMONICS:FUNDCURRent 1.5 sets the fundamental current for the harmonics measurement as 1.5.
:POWer:POWer<x>:HARMONICS:HORDerset / query
Sets or queries the order value for the harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - N | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| value | integer | 40 - 100 | Order value for the harmonics measurement. |
integer - Returns the order value for the harmonics measurement.
POWer:POWer1:HARMONICS:HORDer 70
:POWer:POWer<x>:HARMONICS:HSOURceset / query
Sets or queries the source type for the harmonics measurement of the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CURRent | VOLTage | Source type for the harmonics measurement. |
POWer:POWer1:HARMONICS:HSOURce CURRent sets the source as current for the harmonics measurement.
:POWer:POWer<x>:HARMONICS:IPOWerset / query
Sets or queries the input power for the harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power | real | 0 - 600 | Input power value for the harmonics measurement. |
real - Returns the input power for the harmonics measurement.
POWer:POWer<x>:HARMONICS:IPOWer 150 sets the input power for the harmonics measurement as 150.
:POWer:POWer<x>:HARMONICS:ISOURceset / query
Sets or queries the current source for SOA measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for the harmonics measurement. |
POWer:POWer1:HARMONICS:ISOURce CH2 sets the current source for harmonics measurement as channel 2.
:POWer:POWer<x>:HARMONICS:LINEFREQUEncyset / query
Sets or queries the line frequency value for the Harmonics measurement.
:POWer:POWer<x>:HARMONICS:ODDEVenset / query
Sets or queries the harmonics value analysis format for the specified power measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement identifier number. |
enum - Returns the harmonics value analysis format.
POWer:POWer3:HARMONICS:ODDEVen ALL POWer:POWer<x>:HARMONICS:ODDEVen?
:POWer:POWer<x>:HARMONICS:PFACtorset / query
Sets or queries the power factor value for the harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 0 | Power measurement number; this is the equivalent of the number shown on a power measurement badge in the UI. |
| power factor | real | 0 - 1 | Power factor value for the harmonics measurement. |
real - Returns the value of power factor for the harmonics measurement of the specified power measurement number.
POWer:POWer2:HARMONICS:PFACtor 0.7 sets the power factor as 0.7 for harmonics measurement 2.
:POWer:POWer<x>:HARMONICS:POWERRatingset / query
Sets or queries the power level for the harmonics measurement of the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | HIGH | LOW | Selects the power level used for the harmonics measurement. |
enum - Returns the current power level for the harmonics measurement.
POWer:POWer<x>:HARMONICS:POWERRating {HIGH | LOW}
POWer:POWer<x>:HARMONICS:POWERRating?:POWer:POWer<x>:HARMONICS:RCURRentset / query
Sets or queries the rated current for the harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | 0 - 100 | Rated current value. |
real - Returns the rated current for the specified harmonics measurement.
POWer:POWer2:HARMONICS:RCURRent 1.5 sets the rated current as 1.5 for harmonics measurement 2.
:POWer:POWer<x>:HARMONICS:STANDardset / query
Sets or queries the test mode for harmonics measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NONe | IEC | MIL | AM14 | DO160 | CUSTOM | Test mode for harmonics measurement. |
:POWer:POWer<x>:HARMONICS:STARTFREQUEncyset / query
Sets or queries the start frequency for the Harmonics measurement for the specified power measurement number. The value is in hertz and must be within 1 Hz to 1 GHz.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR2> | real | 1 Hz - 1 GHz | Sets the starting frequency, in hertz. |
real (Hz) - Returns the current start frequency for the Harmonics measurement, in hertz.
POWer:POWer1:HARMONICS:STARTFREQUEncy 1000 sets the Harmonics measurement start frequency to 1 kHz for power measurement 1. POWer:POWer4:HARMONICS:STARTFREQUEncy? might return POWer:POWer4:HARMONICS:STARTFREQUEncy 60, indicating that the start frequency for Harmonics power measurement 4 is 60 Hz.
:POWer:POWer<x>:HARMONICS:UNITsset / query
Sets or queries the harmonics results units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | LOG | LINear | Harmonics results units to use. |
enum - Returns the harmonics results units setting.
POWer:POWer1:HARMONICS:UNITs LOG sets the harmonics results units as logarithmic for harmonics measurement 1.
:POWer:POWer<x>:HARMONICS:VSOURceset / query
Sets or queries the voltage source for SOA measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 8 | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source to use for the SOA measurement. |
POWer:POWer4:HARMONICS:VSOURce CH1
:POWer:POWer<x>:IMPEDANCE:AMP<x>Valset / query
Sets or queries the signal generator amplitude setting of the specified profile step for the specified Impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 10 | Specifies the number of the profile step. |
| amplitude | real | -100 - 100 | Sets the generator output amplitude for the specified profile step. |
real (V) - Returns the generator output amplitude for the specified profile step.
POWer:Power2:IMPEDANCE:AMP1Val 35 POWer:Power3:IMPEDANCE:AMP2Val?
:POWer:POWer<x>:IMPEDANCE:ANALYSISMethodset / query
Sets or queries the Analysis Method for impedance measurements. The power measurement number is specified by <x>.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number shown on the power measurement badge in the UI. |
| method | enum | SVAVG | SVNORMAL | FFT | Analysis method to use for impedance measurements. |
enum - Returns the current analysis method for the selected power measurement.
POWer:POWer1:IMPEDANCE:ANALYSISMethod SVNORMAL POWer:POWer1:IMPEDANCE:ANALYSISMethod?
:POWer:POWer<x>:IMPEDANCE:AUTORbwset / query
Enables or disables Auto RBW computation for the selected power measurement. The query returns whether Auto RBW computation is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | True | False | Enables or disables Auto RBW computation. |
enum - Returns whether Auto RBW computation is enabled or disabled.
POWer:POWer1:IMPEDANCE:AUTORbw true POWer:POWer1:IMPEDANCE:AUTORbw?
Queries the instrument's connection status to the external generator for the specified Impedance measurement. The generator IP address for external generators is set with POWer:POWer<x>:IMPEDANCE:GENIPADDress.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Number of the Impedance power measurement. |
enum - Connection status to the external generator: SUCCess indicates the instrument recognizes the connection; FAILure indicates the instrument could not make the connection; UNSUPPorted indicates the connected generator is not recognized.
POWer:POWer1:IMPEDANCE:CONNECTSTATus? might return FAILURE, indicating that the instrument could not connect to the external generator at the specified IP address.
:POWer:POWer<x>:IMPEDANCE:CONSTAMPlitudeset / query
Sets or queries the constant amplitude value for the specified Impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Number of the Impedance power measurement. |
| amplitude | real | –100 - 100 | Constant amplitude value. |
POWer:POWer3:IMPEDANCE:CONSTAMPlitude 20 sets the constant amplitude value for Impedance power measurement 3 to 20 volts.
:POWer:POWer<x>:IMPEDANCE:FREQ<x>Valset / query
Sets or queries the signal generator start frequency of the specified profile step for the specified impedance measurement. The start frequency can be set from 10 Hz to 50 MHz, and the stop frequency is automatically set to the next profile step's start frequency.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | Number of the impedance power measurement. |
| FREQ<x> | integer | 1 - 10 | Number of the profile step. |
| start frequency | real | 10 - 50 | Start frequency for the specified profile step. |
real (Hz to MHz) - Returns the start frequency of the specified profile step for the impedance measurement.
POWer:POWer5:IMPEDANCE:FREQ3Val 1e3 POWer:POWer8:IMPEDANCE:FREQ2Val?
:POWer:POWer<x>:IMPEDANCE:GENeratorset / query
Sets or queries the generator source for the Impedance power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | INTernal | EXTernal | Selects the generator source for the Impedance power measurement. |
enum - Returns the generator source for the Impedance power measurement.
:POWer:POWer<x>:IMPEDANCE:GENIPADDressset / query
Sets or queries the external generator IP address associated with the specified Impedance power measurement. The query returns the configured address, or an empty string if no address is set.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | The number of the Impedance power measurement. |
| address | string | - | IP address of the generator. |
string - Returns the external generator IP address for the specified Impedance power measurement, or "" if no address is set.
POWer:POWer4:IMPEDANCE:GENIPADDress 164.32.1.5 POWer:POWer2:IMPEDANCE:GENIPADDress?
:POWer:POWer<x>:IMPEDANCE:IMPEDANCEset / query
Sets or queries the output impedance of the generator for the specified Impedance power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 7 | Number of the Impedance power measurement. |
| impedance | enum | FIFTy | HIGHZ | Sets the measurement impedance. |
:POWer:POWer<x>:IMPEDANCE:INPUTSOurceset / query
Sets or queries the source for the Impedance input measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the signal source for the Impedance input measurement. |
enum - Returns the source for the Impedance input measurement.
POWer:POWer1:IMPEDANCE:INPUTSOurce MATH5 sets the signal source for the input Impedance power measurement 2 to Math waveform 5. POWer:POWer2:IMPEDANCE:INPUTSOurce? might return CH3, indicating that the signal source for the input Impedance power measurement 2 is channel 3.
:POWer:POWer<x>:IMPEDANCE:OUTPUTSOurceset / query
Sets or queries the source for the Impedance output measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the instrument input channel, math waveform, or reference waveform used as the signal source. |
POWer:POWer1:IMPEDANCE:INPUTSOurce MATH5 sets the signal source for the input Impedance power measurement 2 to Math waveform 5. POWer:POWer2:IMPEDANCE:INPUTSOurce? might return CH3, indicating that the signal source for the input Impedance power measurement 2 is channel 3.
:POWer:POWer<x>:IMPEDANCE:PPDset / query
Sets or queries the points per decade for the specified Impedance measurement. The value is the number of frequency points between the start and stop frequency on a log scale, in the range of 10 to 100 points.
| Name | Type | Values | Description |
|---|---|---|---|
| points | integer | 10 - 100 | Number of frequency points between the start and stop frequency in terms of log scale. |
integer - Returns the points per decade setting for the specified Impedance measurement.
POWer:POWer1:IMPEDANCE:PPD 20 sets the constant amplitude value for Impedance power measurement 1 to 20 points per decade. POWer:POWer2:IMPEDANCE:PPD? might return 30, indicating that the points per decade setting for Impedance power measurement 2 is 30 points per decade.
:POWer:POWer<x>:IMPEDANCE:SPAN<x>Valset / query
Sets or queries the span value for Power FRA measurements.
:POWer:POWer<x>:IMPEDANCE:SPRofileset / query
Sets or queries the sweep profile for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| profile | enum | AUTO | CUSTOM | Sweep profile to use. |
enum - Returns the current sweep profile.
POWer:POWer1:IMPEDANCE:SPRofile CUSTOM POWer:POWer1:IMPEDANCE:SPRofile?
:POWer:POWer<x>:IMPEDANCE:STARTFREQuencyset / query
Sets or queries the start frequency value for the specified Impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | - | Start frequency value to set for the impedance measurement. |
:POWer:POWer<x>:IMPEDANCE:STOPFREQuencyset / query
Sets or queries the stop frequency for the specified Impedance power measurement. Requires option 5-PWR on 5 Series MSO instruments or 6-PWR on 6 Series MSO instruments.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | The number of the Impedance power measurement. |
| stop frequency | real | 10 Hz - 50 MHz | Specifies the stop frequency. |
real (Hz) - Returns the stop frequency for the specified Impedance power measurement.
POWer:POWer1:IMPEDANCE:STOPFREquency 180 sets the stop frequency for Impedance power measurement 1 to 180 Hz. POWer:POWer2:IMPEDANCE:STARTFREquncy? might return 100.0000, indicating the stop frequency for Impedance power measurement 2 is 100 Hz.
:POWer:POWer<x>:IMPEDANCE:TESTCONNectionset / query
Tests the connection with the external instrument for the specified Impedance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Number of the impedance power measurement. |
:POWer:POWer<x>:INDUCTANCE:EDGESourceset / query
Sets or queries the edge source for the power inductance measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Edge source for the inductance measurement. |
enum - Returns the current edge source for the selected inductance measurement.
POWer:POWer1:HARMONICS:INDUCTANCE:EDGESource CH2 sets the signal edge source for inductance measurement 1 as Channel 2. POWer:POWer3:HARMONICS:INDUCTANCE:EDGESource? might return CH4, indicating that the signal edge source for inductance measurement 3 is Channel 4.
:POWer:POWer<x>:INDUCTANCE:ISOUrceset / query
Sets or queries the current signal source for the inductance measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Signal source specifier for the inductance measurement. |
POWer:POWer7:HARMONICS:INDUCTANCE:ISource CH3 POWer:POWer3:HARMONICS:INDUCTANCE:ISource? might return CH4
:POWer:POWer<x>:INDUCTANCE:VSOURceset / query
Sets or queries the voltage source for inductance measurement of the specified power measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 | Power measurement number; this is the equivalent of the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source specifier. |
:POWer:POWer<x>:INPUTCAP:ISOURceset / query
Sets or queries the inrush current input source of the specified Input Capacitance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Input source for the measurement. |
enum - Returns the current input source of the specified Input Capacitance measurement.
POWer:POWer2:INRUSHcurrent:ISOURce? might return POWer:POWer2:INRUSHcurrent:ISOURce CH6, indicating that the current source of the Input Capacitance measurement 2 is Channel 6.
:POWer:POWer<x>:INPUTCAP:PEAKCURRentset / query
Sets or queries the peak current value of the specified Input Capacitance measurement. The value is a floating point number in amps from -100 A to 100 A.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number equivalent to the number shown on a power measurement badge in the UI. |
| peak current value | real | -100 - 100 | Peak current value to set for the Input Capacitance measurement. |
POWer:POWer4:INPUTCAP:PEAKCURRent 12.5 POWer:POWer2:INPUTCAP:PEAKCURRent?
:POWer:POWer<x>:INPUTCAP:PEAKVOLTageset / query
Sets or queries the peak voltage value of the specified Input Capacitance measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| value | real | -100 - 100 | Peak voltage value. |
returns
POWer:POWer4:INPUTCAP:PEAKVOLTage 122.5 POWer:POWer2:INPUTCAP:PEAKVOLTage? might return POWer:POWer2:INPUTCAP:PEAKVOLTage 955, indicating that the peak voltage setting of Input Capacitance measurement 2 to 955 volts.
:POWer:POWer<x>:INPUTCAP:VSOURceset / query
Sets or queries the voltage source of the specified input capacitance measurement. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Voltage source for the input capacitance measurement. |
enum - Returns the current voltage source of the input capacitance measurement.
POWer:POWer1:INPUTCAP:VSOURce CH2 POWer:POWer1:INPUTCAP:VSOURce? might return POWer:POWer2:INPUTCAP:VSOURce MATH6, indicating that the voltage source of Input Capacitance measurement 2 is Math waveform 6.
:POWer:POWer<x>:INRUSHcurrent:INPUTSOurceset / query
Sets or returns the input source of the specified Inrush Current measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Input source for the measurement. |
enum - Returns the selected input source as a channel, reference waveform, or math waveform specifier.
:POWer:POWer<x>:INRUSHcurrent:PEAKCURRentset / query
Sets or returns the peak current value of the specified Inrush Current measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | -100 - 100 | Peak current value to set, in amps. |
real (A) - Returns the peak current setting, in amps.
POWer:POWer4:INRUSHcurrent:PEAKCURRent 12.5 POWer:POWer2:INRUSHcurrent:PEAKCURRent?
:POWer:POWer<x>:IVSINTEGRALV:ISOURceset / query
Sets or queries the current source for the I vs Integral V measurement of the specified power measurement number.
:POWer:POWer<x>:IVSINTEGRALV:VSOURceset / query
Sets or queries the voltage source for the I vs Integral V measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source for the measurement. |
enum - Returns the current voltage source for the I vs Integral V measurement.
POWer:POWer2:IVSINTEGRALV:VSOURce CH1 POWer:POWer4:IVSINTEGRALV:VSOURce?
:POWer:POWer<x>:LABelset / query
Sets or queries the label for the specified power measurement. The label is stored in Percent Encoding format and applies to the power measurement badge identified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
:POWer:POWer<x>:LINERIPPLE:INPUTSOurceset / query
Sets or queries the input source for line ripple measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the line ripple measurement. |
POWer:POWer1:LINERIPPLE:INPUTSOurce CH1 sets channel 1 as the input source for line ripple measurement of power measurement badge Power 1.
:POWer:POWer<x>:LINERIPPLE:LFREQuencyset / query
Sets or queries the frequency present for line ripple measurement of the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | enum | FIFty | SIXty | FOURHundred | Line ripple frequency setting. |
:POWer:POWer<x>:MAGNETICLOSS:ISOURceset / query
Sets or queries the current source for the magnetic loss measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current signal source for the magnetic loss measurement. |
enum - Returns the current source for the magnetic loss measurement.
POWer:POWer1:MAGNETICLOSS:ISOURce CH7 POWer:POWer2:MAGNETICLOSS:ISOURce?
:POWer:POWer<x>:MAGNETICLOSS:VSOURceset / query
Sets the voltage source for the magnetic loss measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source for the magnetic measurement. |
Sets or queries the coil cross section area for magnetic measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| area | real | 1 nm2 - 1 M2 | Cross section area in square meters. |
real (m2) - Returns the cross section area.
POWer:POWer2:MAGPROPERTY:AREAofcrosssection .005 POWer:POWer4:MAGPROPERTY:AREAofcrosssection?
:POWer:POWer<x>:MAGPROPERTY:EDGESOURceset / query
Sets or queries the edge source type for the magnetic property measurement of the specified power measurement number. Current uses the primary voltage source as the signal edge; VOLTAGE uses the primary current source.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | Current | VOLTAGE | Selects the signal edge source type for the magnetic property measurement. |
enum - Returns the current edge source type for the specified power measurement number.
POWer:POWer1:MAGPROPERTY:EDGESource VOLTAGE POWer:POWer3:MAGPROPERTY:EDGESource?
:POWer:POWer<x>:MAGPROPERTY:ISOURceset / query
Sets or queries the current source for the magnetic property measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source selection for the magnetic property measurement. |
:POWer:POWer<x>:MAGPROPERTY:LENgthset / query
Sets or queries the conductor length of the primary winding for the specified power measurement. The returned numeric value is the same regardless of the units setting.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number corresponding to the badge shown in the UI. |
| length | real | 1.00E-09 - 1000000 | Magnetic length. |
real - The magnetic length for the specified power measurement.
POWer:POWer2:MAGPROPERTY:LENgth 2.5 sets the primary winding length to 2.5 for power measurement 2. POWer:POWer5:MAGPROPERTY:LENgth? might return 10.54E-3, indicating that the primary winding length for power measurement 5 is 0.01054.
:POWer:POWer<x>:MAGPROPERTY:PRIMARYTURNsset / query
Sets or queries the number of turns in the primary winding for the specified magnetic property power measurement. The measurement number corresponds to the number shown in the power measurement badge on the UI.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 1 M | Power measurement number. |
| turns | integer | 1 - 1 M | Integer number of turns in the primary winding. |
integer - Returns the integer number of turns in the primary winding for the specified power measurement.
POWer:POWer2:MAGPROPERTY:PRIMARYTURNs 150 POWer:POWer5:MAGPROPERTY:PRIMARYTURNs?
:POWer:POWer<x>:MAGPROPERTY:SEC1SOURceset / query
Sets or queries the current source channel for secondary winding 1 for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source channel for secondary winding 1. |
POWer:POWer2:MAGPROPERTY:SEC1SOURce CH1 POWer:POWer5:MAGPROPERTY:SEC1SOURce?
:POWer:POWer<x>:MAGPROPERTY:SEC1TURNsset / query
Sets or queries the number of turns of secondary winding 1 for magnetic measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| NR1 | real | 0 - 1,000,000 | The number of turns on the secondary winding. |
real - The number of turns on secondary winding 1 for the specified power measurement number.
POWer:POWer3:MAGPROPERTY:SEC1TURNs 500 sets the number of turns on secondary winding 1 to 500 for magnetic POWer:POWer3:MAGPROPERTY:SEC1TURNs? might return 2500, indicating that their are 2,500 turns on secondary winding 4 for magnetic
:POWer:POWer<x>:MAGPROPERTY:SECPhaseset / query
Sets or returns the phase difference between secondary and primary voltage for a specified power measurement. The value is given in degrees.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown in the UI for a power measurement badge. |
| phase | real | -180 - 180 | Phase difference between secondary and primary voltage. |
real (degrees) - Returns the phase difference between secondary and primary voltage in degrees.
POWer:POWer1:MAGPROPERTY:SECPhase 180 POWer:POWer1:MAGPROPERTY:SECPhase?
:POWer:POWer<x>:MAGPROPERTY:SECVoltset / query
Enables or disables the secondary voltage input for the selected magnetic power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | True | False | Enables or disables the secondary voltage source. |
enum - Returns whether the secondary voltage source is enabled or disabled.
POWer:POWer1:MAGPROPERTY:SECVolt true enables secondary voltage source. POWer:POWer1:MAGPROPERTY:SECVolt? might return POWer:POWer1:MAGPROPERTY:SECVolt true, indicating that the secondary voltage source is enabled.
:POWer:POWer<x>:MAGPROPERTY:SECWINDingsset / query
Sets or queries the number of secondary windings for the magnetic property measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | The magnetic property power measurement number, equivalent to the number shown in the power measurement badge on the UI. |
| number of secondary windings | enum | None | ONE | TWO | THREE | FOUR | FIVE | SIX | Sets the number of secondary windings to the specified value. |
enum - Returns the number of secondary windings as a keyword such as FOUR.
POWer:POWer2:MAGPROPERTY:SECWINDings 4 POWer:POWer11:MAGPROPERTY:SECWINDings?
:POWer:POWer<x>:MAGPROPERTY:UNITsset / query
Sets or queries the unit system used for the magnetic property measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SI | CGS | Selects the measurement units system. |
enum - Returns the current magnetic property unit system for the specified power measurement.
POWer:POWer5:MAGPROPERTY:UNITs SI POWer:POWer1:MAGPROPERTY:UNITs?
:POWer:POWer<x>:MAGPROPERTY:VSOURceset / query
Sets or queries the primary winding voltage source for the magnetic measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Primary winding voltage source for the magnetic measurement. |
POWer:POWer1:MAGPROPERTY:VSOURce CH4 sets power measurement 1 to use channel 4 as the primary winding voltage source for the magnetic power measurement.
:POWer:POWer<x>:NDUTYCYCLE:EDGETypeset / query
Sets or queries the clock edge type for negative duty cycle measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| edgeType | enum | RISE | FALL | BOTH | Clock edge type used for the negative duty cycle measurement. |
enum - Returns the current clock edge type for the negative duty cycle measurement.
POWer:POWer1:NDUTYCYCLE:EDGEType RISE
:POWer:POWer<x>:NDUTYCYCLE:INPUTSOurceset / query
Sets or queries the input source for negative duty cycle measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the negative duty cycle measurement. |
enum - Returns the selected input source for the negative duty cycle measurement.
POWer:POWer1:NDUTYCYCLE:INPUTSOurce CH3
:POWer:POWer<x>:NPULSEWIDTH:INPUTSOurceset / query
Sets or queries the input source for negative pulse width measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the source waveform for the negative pulse width measurement. |
enum - Returns the input source for the negative pulse width measurement.
POWer:POWer1:NPULSEWIDTH:INPUTSOurce CH1
:POWer:POWer<x>:PDUTYCYCLE:EDGETypeset / query
Sets or queries the clock edge type for positive duty cycle measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | CH<x> | MATH<x> | REF<x> | Specifies the source waveform to use. |
POWer:POWer1:PDUTYCYCLE:EDGEType BOTH sets the clock edge type as both (rise and fall) for the positive duty cycle measurement.
:POWer:POWer<x>:PDUTYCYCLE:INPUTSOurceset / query
Sets or queries the input source for positive duty cycle measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the positive duty cycle measurement. |
enum - Returns the selected input source for the positive duty cycle measurement.
POWer:POWer1:PDUTYCYCLE:INPUTSOurce CH4
:POWer:POWer<x>:PERIOD:EDGeset / query
Sets or queries the edge type for period measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RISE | FALL | Edge type for the period measurement. |
POWer:POWer1:PERIOD:EDGe RISE sets the edge type as rise for the period measurement.
:POWer:POWer<x>:PERIOD:INPUTSOurceset / query
Sets or queries the input source for the specified power period measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Specifies the waveform source for the period measurement. |
POWer:POWer1:PERIOD:INPUTSOurce CH6 sets the input source for period measurement as channel 6.
:POWer:POWer<x>:POWERQUALITY:CCYClesset / query
Sets or queries the calculate cycles over full cycles setting for the specified power quality measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Selects or deselects calculate cycles over full cycles for the measurement. |
POWer:POWer1:POWERQUALITY:CCYCles 1 selects the calculate cycles over full cycles for the power measurement badge 1.
:POWer:POWer<x>:POWERQUALITY:FREFerenceset / query
Sets or queries the frequency reference type for power quality measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 8 | Power measurement number. |
| type | enum | VOLTage | CURRent | Frequency reference type for power quality measurement. |
enum - Returns the present frequency reference type for power quality measurement.
POWer:POWer1:POWERQUALITY:FREFerence CURRent sets the frequency reference type for power quality measurement as current.
:POWer:POWer<x>:POWERQUALITY:ISOURceset / query
Sets or queries the current source for power quality measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for power quality measurement. CH<x> is a channel specifier, MATH<x> is a math waveform specifier, and REF<x> is a reference waveform specifier. |
:POWer:POWer<x>:POWERQUALITY:STYPeset / query
Sets or queries the signal type used for the specified power quality measurement. The setting can be AC or DC.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number shown on the power measurement badge in the UI. |
| state | enum | AC | DC | Sets the signal type as AC or DC. |
enum - Returns the current signal type setting for the specified power quality measurement.
POWer:POWer1:POWERQUALITY:STYPe AC POWer:POWer1:POWERQUALITY:STYPe?
:POWer:POWer<x>:POWERQUALITY:VSOURceset / query
Sets or queries the voltage source for power quality measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source for the power quality measurement. |
POWer:POWer1:POWERQUALITY:VSOURce CH1 sets the voltage source for power quality measurement as channel 1.
:POWer:POWer<x>:PPULSEWIDTH:INPUTSOurceset / query
Sets or queries the input source for the positive pulse width power measurement. The source can be a channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the waveform source for the measurement. |
enum - Returns the current input source for the positive pulse width measurement.
POWer:POWer1:PPULSEWIDTH:INPUTSOurce CH5 sets channel 5 as the input source for the positive pulse width measurement 1.
:POWer:POWer<x>:PRESETset / query
Runs a power preset action for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | 1 - 8 | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| action | enum | EXECute | Runs the power preset action. |
POWer:POWer5:PRESET Execute runs the power preset action for power measurement 5.
:POWer:POWer<x>:PSRR:AMP<x>Valset / query
Sets the generator output amplitude for a PSRR configuration step, or queries the current amplitude setting. The power measurement number and configuration step index are encoded in the command path.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | V | Generator output amplitude to set for the specified configuration step. |
real (V) - Returns the generator output amplitude setting for the specified configuration step.
POWer:POWer1:PSRR:AMP3Val 20 POWer:POWer2:PSRR:AMP8Val? might return 60
:POWer:POWer<x>:PSRR:ANALYSISMethodset / query
Sets or queries the Analysis Method for PSRR measurements.
enum - Returns the current Analysis Method setting.
POWer:POWer1:PSRR:ANALYSISMethod SVNORMAL POWer:POWer1:PSRR:ANALYSISMethod? might return POWer:POWer1:PSRR:ANALYSISMethod SVNORMAL
:POWer:POWer<x>:PSRR:AUTORbwset / query
Enables or disables Auto RBW computation for the specified PSRR power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| state | enum | True | False | Enables or disables Auto RBW computation. |
POWer:POWer1:PSRR:AUTORbw true POWer:POWer1:PSRR:AUTORbw?
Queries the external instrument's connection status for the specified Power Supply Rejection Ratio (PSRR) measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWER<x> | - | - | The number of the PSRR power measurement. |
enum - Indicates the connection status to the external generator.
POWer:POWer<x>:PSRR:CONNECTSTATus? might return FAILURE, indicating that the instrument could not connect to the external generator at the specified IP address.
:POWer:POWer<x>:PSRR:CONSTAMPlitudeset / query
Sets or queries the constant amplitude voltage value for the specified power measurement. The value is used for the Power Supply Rejection Ratio (PSRR) measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 0 | Power measurement number; equivalent to the number shown in the UI for a power measurement badge. |
| amplitude | real | -100 - 100 | Constant amplitude voltage value for the measurement. |
real (V) - Returns the constant amplitude voltage for the specified power measurement.
POWer:POWer3:PSRR:CONSTAMPlitude 120 POWer:POWer5:PSRR:CONSTAMPlitude?
:POWer:POWer<x>:PSRR:FREQ<x>Valset / query
Sets or queries the generator frequency value of the specified configuration step for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | 1 - - | Sets the power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| FREQ<x>Val | integer | 1 - 11 | Sets the configuration step number. |
| frequency | real | 10 - 50 MHz | Sets the frequency of the specified configuration step number. |
real (Hz) - Returns the generator frequency output for the specified configuration step and power measurement.
POWer:POWer5:PSRR:FREQ1Val 200 POWer:POWer2:PSRR:FREQ3Val? might return 2.000E+6, indicating that the generator frequency output for frequency band 3 is 2.0 MHz, for power measurement 2.
:POWer:POWer<x>:PSRR:GENeratorset / query
Sets or queries the generator source used to send stimulus signals to the DUT for the Power Supply Rejection Ratio (PSRR) power measurement. Requires option 5-PWR or 6-PWR.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown in the UI for a power measurement badge. |
| source | enum | INTernal | EXTernal | Selects the generator source for the PSRR power measurement. |
enum - Returns the generator source for the selected PSRR power measurement.
POWer:POWer3:PSRR:GENerator INTernal POWer:POWer2:PSRR:GENerator? POWer:POWer1:PSRR:GENerator Internal POWer:POWer7:PSRR:GENerator?
:POWer:POWer<x>:PSRR:GENIPADDressset / query
Sets or queries the instrument's IP address associated with the specified PSRR measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Number of the PSRR power measurement. |
| QString | string | - | IP address of the generator. |
string - The IP address of the external generator for the specified PSRR power measurement; may be empty if no address is set.
POWer:POWer4:PSRR:GENIPADDress 127.1.1.1 POWer:POWer2:PSRR:GENIPADDress?
:POWer:POWer<x>:PSRR:IMPEDanceset / query
Sets or queries the vertical termination impedance for the specified PSRR power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | The power measurement number. |
| impedance | enum | FIFTy | HIGHZ | Sets the termination impedance to either 50 Ω or 1 MΩ. |
enum - Returns the current vertical termination impedance for the specified PSRR power measurement.
POWer:POWer3:PSRR:IMPEDance FIFTy sets the vertical termination impedance for power measurement 3 to be 50 Ω.
:POWer:POWer<x>:PSRR:INPUTSOurceset / query
Sets or queries the input source for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | channel_list | - | Sets the channel to use for the input source. |
channel_list - Returns the input source channel for the selected PSRR power measurement.
POWer:POWer2:PSRR:INPUTSOurce CH3 POWer:POWer2:PSRR:INPUTSOurce?
:POWer:POWer<x>:PSRR:OUTPUTSOurceset / query
Sets or queries the output source for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Channel to use for the output source. |
POWer:POWer1:PSRR:OUTPUTSOurce CH3
:POWer:POWer<x>:PSRR:PPDset / query
Sets or queries the points per decade (PPD) value for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | x - x | Power measurement number shown in the UI for a power measurement badge. |
| ppd | integer | 10 - 100 | PPD value for the measurement, in points. |
integer (points) - Returns the PPD value for the selected power measurement, in points.
POWer:POWer3:PSRR:PPD 30 sets the PPD for Power measurement 3 to be 30 points. POWer:POWer5:PSRR:PPD? might return 20, indicating that the PPD value for power measurement 5 is 20 points.
:POWer:POWer<x>:PSRR:SPAN<x>Valset / query
Sets or queries the span value for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Span value for PSRR. |
POWer:POWer1:PSRR:SPAN1Val 2 sets the span value to 2.
:POWer:POWer<x>:PSRR:SPRofileset / query
Sets or queries the sweep profile for Power FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number. |
| mode | enum | AUTO | CUSTOM | Sweep profile selection. |
enum - Returns the current sweep profile.
POWer:POWer1:PSRR:SPRofile CUSTOM POWer:POWer1:PSRR:SPRofile? might return POWer:POWer1: PSRR:SPRofile AUTO, indicating that sweep profile is auto.
:POWer:POWer<x>:PSRR:STARTFREQuencyset / query
Sets or queries the start frequency value for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | 10 Hz - 50 MHz | The starting frequency for the measurement. |
POWer:POWer8:PSRR:STARTFREQuency 12 sets the starting frequency for power measurement 8 to be 12 Hz.
:POWer:POWer<x>:PSRR:STOPFREQuencyset / query
Sets or queries the stop frequency value for the Power Supply Rejection Ratio (PSRR) power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 10 Hz - 50 MHz | Stop frequency for the measurement. |
numeric (Hz) - Returns the stop frequency for the specified power measurement, in Hz.
POWer:POWer3:PSRR:STOPFREQuency 120 POWer:POWer5:PSRR:STOPFREQuency?
:POWer:POWer<x>:PSRR:TESTCONNectionset / query
Tests the connection with the external instrument for the specified PSRR measurement. This command has no query form.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | x - x | Power measurement number corresponding to the PSRR power measurement badge. |
| execute | enum | EXECute | Runs the test connection function. |
POWer:POWer3:PSRR:TESTCONNection {EXECute}:POWer:POWer<x>:RDSON:DEVICETypeset / query
Sets or queries the device type for the power drain source on resistance measurement for the specified RDSon power measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown in the power measurement badge on the UI. |
| mode | enum | SWITCHING | PNJUNCTION | Device type for the RDSon measurement. |
enum - Returns the current device type for the specified RDSon power measurement number.
POWer:POWer3:RDSON:DEVICEType PNJUNCTION POWer:POWer1:RDSON:DEVICEType?
:POWer:POWer<x>:RDSON:ISOURceset / query
Sets or queries the current source for RDSon measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source used for the RDSon measurement. |
:POWer:POWer<x>:RDSON:VSOURceset / query
Sets or queries the voltage source for RDSon measurement of the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | 1 | Power measurement number to target. |
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source to use for the RDSon measurement. |
enum - Returns the current voltage source for the specified RDSon measurement.
POWer:POWer2:RDSON:VSOURce CH7 POWer:POWer1:RDSON:VSOURce?
:POWer:POWer<x>:REFLevels:ABSolute:FALLHighset / query
Sets the high reference level for falling edge in absolute units for the specified power measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | –40000 - 40000 | The power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| <NR1> | real | –40000 - 40000 | The absolute reference level value. |
POWer:POWer1:REFLevels:ABSolute:FALLHigh 1 sets the high reference level for falling edge as 1 volt.
:POWer:POWer<x>:REFLevels:ABSolute:FALLLowset / query
Sets or queries the falling-edge low reference level in absolute units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number, equivalent to the number shown in the UI for a power measurement badge. |
| level | real | –40000 - 40000 | Low reference level value. |
real - Returns the falling-edge low reference level in absolute units.
POWer:POWer1:REFLevels:ABSolute:FALLLow –1 sets the low reference level for falling edge as –1 volt.
:POWer:POWer<x>:REFLevels:ABSolute:FALLMidset / query
Sets or queries the falling edge mid reference level in absolute units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWER<x> | integer | -40000 - 40000 | Power measurement number equivalent to the number shown on a power measurement badge in the UI. |
| level | real | -40000 - 40000 | Absolute mid reference level for the falling edge. |
POWer:POWer1:REFLevels:ABSolute:FALLMid 0
Sets or queries the absolute hysteresis value for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| hysteresis | real | 0.0000005 - 10 | Absolute hysteresis value. |
real - Returns the absolute hysteresis value for the specified power measurement number.
:POWer:POWer<x>:REFLevels:ABSolute:RISEHighset / query
Sets or queries the rising edge high reference level in absolute units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | –40000 - 40000 | Power measurement number (POWer<x>), equivalent to the number shown on a power measurement badge in the UI. |
| value | real | –40000 - 40000 | Absolute high reference level for the rising edge. |
real - Returns the rising edge high reference level in absolute units for the specified power measurement number.
POWer:POWer1:REFLevels:ABSolute:RISEHigh 1 sets the high reference level for rising edge as 1 volt.
:POWer:POWer<x>:REFLevels:ABSolute:RISELowset / query
Sets or queries the rising edge low reference level in absolute units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | ? - ? | Power measurement number corresponding to the power measurement badge shown in the UI. |
real - Returns the rising edge low reference level in absolute units.
:POWer:POWer<x>:REFLevels:ABSolute:RISEMidset / query
Sets or queries the rising edge mid reference level in absolute units for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | –40000 - 40000 | Power measurement number. |
| level | real | –40000 - 40000 | Mid reference level for rising edge in absolute units. |
real - Returns the rising edge mid reference level in absolute units for the specified power measurement number.
POWer:POWer1:REFLevels:ABSolute:RISEMid 0 sets the mid reference level for rising edge as 0 volt.
:POWer:POWer<x>:REFLevels:ABSolute:TYPEset / query
Sets or queries the type of measurement levels when reference level is set to absolute for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SAME | UNIQue | Selects the measurement level type used when absolute reference levels are enabled. |
:POWer:POWer<x>:REFLevels:BASETopset / query
Sets or queries the reference level base top method for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | MINMax | MEANhistogram | MODEhistogram | EYEhistogram | Selects the reference level base top method. |
enum - Returns the reference level base top method for the specified power measurement number.
POWer:POWer1:REFLevels:BASETop AUTO sets the reference level base top method as auto for the power measurement badge 1.
:POWer:POWer<x>:REFLevels:METHodset / query
Sets or queries the method used to configure reference level values for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| method | enum | PERCent | ABSolute | Selects the method used to configure reference level values. |
enum - Returns the current reference level method for the specified power measurement number.
:POWer:POWer<x>:REFLevels:PERCent:FALLHighset / query
Sets or queries the falling edge high reference level in percentage for the specified power measurement number. Requires the PWR or PS2 option.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 99 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
| value | real | 1 - 99 | High reference level for the falling edge, expressed as a percentage. |
real (%) - Returns the falling edge high reference level in percentage for the specified power measurement number.
POWer:POWer1:REFLevels:PERCent:FALLHigh 1
:POWer:POWer<x>:REFLevels:PERCent:FALLLowset / query
Sets or queries the falling edge for low reference level in percentage for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 99 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| value | integer | 1 - 99 | Low reference level falling-edge value in percent. |
:POWer:POWer<x>:REFLevels:PERCent:FALLMidset / query
Sets or queries the falling edge mid reference level in percentage for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - 99 | Power measurement number. |
POWer:POWer1:REFLevels:PERCent:FALLMid 50 sets the mid reference level for falling edge as 50 percentage.
:POWer:POWer<x>:REFLevels:PERCent:HYSTeresisset / query
Sets or queries the hysteresis in percentage for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | 1 - 99 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
:POWer:POWer<x>:REFLevels:PERCent:RISEHighset / query
Sets or queries the rising edge high reference level in percentage for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 99 | Power measurement number. |
| value | real | NR1 | High reference level for the rising edge, in percent. |
real (%) - Returns the high reference level for the rising edge, in percent.
POWer:POWer1:REFLevels:PERCent:RISEHigh 85 sets the high reference level for rising edge as 85 percentage.
:POWer:POWer<x>:REFLevels:PERCent:RISELowset / query
Sets or queries the rising-edge low reference level in percent for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | 1 - 99 | Power measurement number x, equivalent to the number shown on a power measurement badge in the UI. |
| value | real | 1 - 99 | Low reference level for rising edge as a percentage. |
POWer:POWer1:REFLevels:PERCent:RISELow 10
:POWer:POWer<x>:REFLevels:PERCent:RISEMidset / query
Sets or queries the rising edge mid reference level in percentage for the specified power measurement number x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 99 | Power measurement number shown on the power measurement badge in the UI. |
| value | real | 1 - 99 | Mid reference level for rising edge, in percentage. |
POWer:POWer1:REFLevels:PERCent:RISEMid 55
:POWer:POWer<x>:REFLevels:PERCent:TYPEset / query
Sets or queries the percent reference-level type for the specified power measurement. The choice determines whether the low/high reference levels are 10%/90%, 20%/80%, or custom values.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown on the power measurement badge in the UI. |
| type | enum | TENNinety | TWENtyeighty | CUSTom | Selects the percent reference-level scheme. |
enum - Returns the current percent reference-level type for the specified power measurement.
POWer:POWer1:REFLevels:PERCent:TYPE TENNinety
Queries the maximum value of all acquisitions for the specified power measurement parameter. The power measurement number is specified by x, and the result selector must be one of the quoted QSTring entries listed in the manual.
| Name | Type | Values | Description |
|---|---|---|---|
| query | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Specifies which measurement result to return from the selected power measurement number. |
string - Returns the maximum value of all acquisitions for the specified power measurement result. The returned value is the selected <QString> entry, enclosed in quotes.
Queries the mean value of all acquisitions for the specified result parameter in power measurement <x>. The result parameter must be one of the quoted <QString> values listed in the syntax.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement number. Must be entered in enclosing quotes. |
real - Mean value of all acquisitions for the selected measurement parameter.
POWer:POWer2:RESUlts:ALLAcqs:MEAN? "AMPL" might return 57.45, indicating the mean value of the Amplitude measurement for all acquisitions of power measurement 2.
Returns the selected result from the specified power measurement number. The result name must be entered as a quoted QSTring token, and the available results depend on the type of power measurement being taken.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | Power measurement number; equivalent to the number shown on the power measurement badge in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Quoted result name to return from the specified power measurement. |
string - A quoted QSTring containing the requested measurement result.
Queries the peak-to-peak value of all acquisitions for the specified measurement result in the selected power measurement number. The result keyword must be entered in quotes.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | Power measurement number shown on the measurement badge in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement. |
real - The peak-to-peak value of all acquisitions for the specified measurement result.
POWer:POWer5:RESUlts:ALLAcqs:MINimum? "FREQ"
Queries the population (number of complete cycles) of all acquisitions for the specified power measurement result. The <QString> argument must be one of the listed quoted result keywords and depends on the measurement type in the selected power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement number. |
integer - Population (number of complete cycles) of all acquisitions for the specified measurement parameter.
Queries the standard deviation value of all acquisitions for the specified power measurement result. The result to return is selected by a quoted <QString> argument from the list of valid measurement results.
| Name | Type | Values | Description |
|---|---|---|---|
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Quoted measurement result to return from the specified power measurement number. |
real - Standard deviation value of all acquisitions for the specified measurement result.
POWer:POWer1:RESUlts:ALLAcqs:POPUlation? "CondEnrg" might return 4.91E-3, indicating the population (number of complete cycles) of conduction energy for all acquisitions.
Queries the first harmonics magnitude value for the specified power measurement number.
real - The first harmonics magnitude value for the specified power measurement number.
Queries the fundamental frequency for the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
real - Returns the fundamental frequency for the specified power measurement number.
Queries the RMS current value for the specified power measurement number. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; the equivalent of the number shown on a power measurement badge in the UI. |
real - Returns the RMS current value for the specified power measurement number.
POWer:POWer1:RESUlts:CURRentacq:IRMS? "harmonics" might return 1.4149980733491, indicating the RMS current value for the power measurement badge 1.
Queries the maximum value of the current acquisition for a specified measurement parameter in the selected power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
| measurement | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement number. |
real - The maximum value of the current acquisition for the specified measurement parameter.
POWer:POWer1:RESUlts:CURRentacq:MAXimum? "TONEnrg" might return 32.8, indicating the maximum value of Ton Energy for the current acquisition.
Queries the mean value of the current acquisition for the measurement parameter of the specified power measurement <x>. The result is selected by a quoted string argument identifying the power measurement result to return.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | Power measurement number corresponding to the badge number shown in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Quoted string selecting which measurement result to return. |
string - Returns the mean value of the current acquisition for the specified power measurement result.
Queries the minimum value of the current acquisition for the specified measurement result in a power measurement. The measurement result is selected by a quoted <QString> argument.
| Name | Type | Values | Description |
|---|---|---|---|
| measurement_result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | Max | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Selects which power measurement result to return the minimum of. |
real - Returns the minimum value of the current acquisition for the specified power measurement result.
POWer:POWer1:RESUlts:CURRentacq:MINimum? "TruePwr" might return 4.17829019093E–9, indicating the minimum value of true power for the current acquisition.
Queries the peak-to-peak value of the current acquisition for the specified power measurement and result parameter. The result parameter must be one of the quoted <QString> entries listed in the syntax and arguments.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | The power measurement number (the badge number shown in the UI). |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | The measurement result to return for the specified power measurement number. |
real - Returns the peak-to-peak value of the current acquisition for the specified measurement parameter.
Queries the limit of partial odd harmonic current for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| harmonics | string | - | Selection for the current acquisition result to query. |
real - Returns the limit of partial odd harmonic current for the selected power measurement.
POWer:POWer1:RESUlts:CURRentacq:POHCL? "harmonics" might return 251.3529788962128E-3, indicating the limit of partial odd harmonic current for the power measurement badge 1.
Queries the measured value of partial odd harmonic current for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| harmonics | string | - | String argument shown in the syntax line. |
numeric - Returns the measured value of partial odd harmonic current.
POWer:POWer1:RESUlts:CURRentacq:POHCM? "harmonics" might return 515.422617782020E-6, indicating the measured value of partial odd harmonic current for the power measurement badge 1.
Queries the status of partial odd harmonic current for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
enum - Returns the status of partial odd harmonic current for the specified power measurement number, such as Pass.
POWer:POWer1:RESUlts:CURRentacq:POHCS? "harmonics" might return Pass, indicating the status of partial odd harmonic current for power measurement 1.
Queries the population (number of complete cycles) of the current acquisition for the measurement result specified by x. The measurement result must be entered as a quoted string from the documented list.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| result | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement number; must be quoted. |
integer - Returns the population, i.e. number of complete cycles, for the specified measurement result.
POWer:POWer1:RESUlts:CURRentacq:POPUlation? {InputPwr |Output1Pwr |Output2Pwr |Output3Pwr | Efficiency1 |Efficiency2 |Efficiency3 |TotalEfficiency |INDUCT |IVSINTV |MAGLOSS |Bpeak |Br |Hc |Hmax |IRipple |DeltaB |DeltaH |Permeability |RDS |TRUEPWR |APPPWR |REPWR |PWRFACTOR |PHASE | PWRFREQ |ICFACTOR |VCFACTOR |IRMS |VRMS |TONENRG |TONLOSS |TOFFENRG |TOFFLOSS |CONDENRG | CONDLOSS |TTLLOSS |TTLENRG |DVBYDT |DIBYDT |SOAHITSCNT |LRIPRMS |LRIPPKPK |SWRIPRMS |SWRIPPKPK | PRIOD |FREQ |PDUTY |NDUTY |PPULSE |NPULSE |AMPL |PKPK |HIGH |LOW |MAX |MIN | INRUSH |CAPACITANCE |OUTPUT1 |OUTPUT2 |OUTPUT3 |OUTPUT4 |OUTPUT5 |OUTPUT6 |OUTPUT7 |GAINCROSSOVERFREQ | PHASECROSSOVERFREQ |GM |PM |MAXPSRR |MAXPSRRFREQ |MINPSRR |MINPSRRFREQ}Queries the RMS value of the source selected for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
real - Returns the RMS value of the source selected for power measurement x.
POWer:POWer1:RESUlts:CURRentacq:RMS? "harmonics" might return 1.4143420437461, indicating the RMS value of the source selected for power measurement 1.
Queries the status of the measurement for the specified power measurement number. The power measurement number is specified by x.
string - Returns the status of the measurement for the specified power measurement number.
POWer:POWer1:RESUlts:CURRentacq:STATUS? "harmonics"
Queries the standard deviation value of the current acquisition for the specified power measurement parameter. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| parameter | enum | InputPwr | Output1Pwr | Output2Pwr | Output3Pwr | Efficiency1 | Efficiency2 | Efficiency3 | TotalEfficiency | INDUCT | IVSINTV | MAGLOSS | Bpeak | Br | Hc | Hmax | IRipple | DeltaB | DeltaH | Permeability | RDS | TRUEPWR | APPPWR | REPWR | PWRFACTOR | PHASE | PWRFREQ | ICFACTOR | VCFACTOR | IRMS | VRMS | TONENRG | TONLOSS | TOFFENRG | TOFFLOSS | CONDENRG | CONDLOSS | TTLLOSS | TTLENRG | DVBYDT | DIBYDT | SOAHITSCNT | LRIPRMS | LRIPPKPK | SWRIPRMS | SWRIPPKPK | PRIOD | FREQ | PDUTY | NDUTY | PPULSE | NPULSE | AMPL | PKPK | HIGH | LOW | MAX | MIN | INRUSH | CAPACITANCE | OUTPUT1 | OUTPUT2 | OUTPUT3 | OUTPUT4 | OUTPUT5 | OUTPUT6 | OUTPUT7 | GAINCROSSOVERFREQ | PHASECROSSOVERFREQ | GM | PM | MAXPSRR | MAXPSRRFREQ | MINPSRR | MINPSRRFREQ | Measurement result to return from the specified power measurement number. |
real - Returns the standard deviation value of the current acquisition for the specified power measurement parameter.
POWer:POWer1:RESUlts:CURRentacq:STATUS? "harmonics" might return Pass, indicating that the measurement has passed according to the standard for power measurement 1.
Queries the total harmonic distortion (fundamental) value for the specified power measurement number. The measurement number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
real - Total harmonic distortion (fundamental) value for the specified power measurement.
POWer:POWer2:RESUlts:CURRentacq:THDF? "harmonics"
Queries the total harmonic distortion (RMS) value for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
real - The total harmonic distortion (RMS) value for the specified power measurement number.
POWer:POWer1:RESUlts:CURRentacq:THDR? "harmonics" might return 107.1384597967292E-3, indicating the value of total harmonic distortion (fundamental) for power measurement 1.
Queries the true power value for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
real - Returns the true power value for the specified power measurement number.
POWer:POWer1:RESUlts:CURRentacq:TRPWR? "harmonics" might return 2.0002612633993, indicating the true power value for power measurement 1.
Queries the RMS voltage value for the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number. |
real - RMS voltage value for the specified power measurement.
POWer:POWer3:RESUlts:CURRentacq:VRMS? "harmonics" might return 1.4117680233354, indicating the RMS voltage value for the power measurement 3.
:POWer:POWer<x>:SEQSETupset / query
Sets up the instrument's horizontal, vertical, and trigger parameters to optimize for taking the specified power measurement. The measurement identifier x must refer to a power measurement that requires a single sequence acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement identifier number. |
| Execute | enum | Execute | Sets the measurement to run an acquisition and acquire data for the specified single sequence power measurement. |
POWer:POWer3:SEQuence Execute runs the power measurement 3 sequence setup.
:POWer:POWer<x>:SEQuenceset / query
Sets or queries the sequence mode for a specified single-sequence power measurement. RUN sets the measurement to run an acquisition, and RERUN sets it to rerun an acquisition.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement identifier number; must refer to a power measurement that requires a single sequence acquisition. |
| mode | enum | RUN | RERUN | Selects whether the measurement runs or reruns an acquisition. |
enum - Returns the current sequence setting for the specified single-sequence power measurement.
POWer:POWer3:SEQuence RUN POWer:POWer1:SEQuence?
Queries the current state of the single-sequence power measurement acquisition setting for the specified power measurement. The query may return RUN or RERUN.
enum - Returns the current single-sequence acquisition setting for the specified power measurement.
POWer:POWer1:SEQuence? might return POWer:POWer1:SEQuence RERUN, indicating that the current state of the power measurement is rerun.
:POWer:POWer<x>:SOA:ISOURceset / query
Sets or queries the current source for the SOA measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for the SOA measurement. |
enum - Returns the current source for the SOA measurement.
POWer:POWer1:SOA:ISOURce CH2
Sets or queries the current source for the SOA measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 8 | Power measurement number (the badge number shown in the UI). |
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for the SOA measurement. |
:POWer:POWer<x>:SOA:POINT<x>set / query
Sets or queries the X or Y coordinate value for an SOA mask of a specified power measurement. The power measurement number is specified by x, and POINT<x> selects one of the X or Y mask points.
| Name | Type | Values | Description |
|---|---|---|---|
| POINT<x> | enum | 1X | 2X | 3X | 4X | 5X | 6X | 7X | 8X | 9X | 10X | 11X | 12X | 13X | 14X | 15X | 16X | 17X | 18X | 19X | 20X | 21X | 22X | 23X | 24X | 25X | 26X | 27X | 28X | 29X | 30X | 31X | 32X | 1Y | 2Y | 3Y | 4Y | 5Y | 6Y | 7Y | 8Y | 9Y | 10Y | 11Y | 12Y | 13Y | 14Y | 15Y | 16Y | 17Y | 18Y | 19Y | 20Y | 21Y | 22Y | 23Y | 24Y | 25Y | 26Y | 27Y | 28Y | 29Y | 30Y | 31Y | 32Y | Selects the specified SOA mask X or Y point. |
| <NR1> | real | –5000 - 5000 | Sets the specified SOA mask X or Y point value as a floating number. |
POWer:POWer1:SOA:POINT6Y 0.125 POWer:POWer3:SOA:POINT12X? might return POWer:POWer3:SOA:POINT12X 1.435
Sets or queries the X or Y coordinate value for an SOA mask of a specified power measurement. The power measurement number is x, and POINT<x> selects one of the numbered X or Y points.
| Name | Type | Values | Description |
|---|---|---|---|
| point | enum | 1X | 2X | 3X | 4X | 5X | 6X | 7X | 8X | 9X | 10X | 11X | 12X | 13X | 14X | 15X | 16X | 17X | 18X | 19X | 20X | 21X | 22X | 23X | 24X | 25X | 26X | 27X | 28X | 29X | 30X | 31X | 32X | 1Y | 2Y | 3Y | 4Y | 5Y | 6Y | 7Y | 8Y | 9Y | 10Y | 11Y | 12Y | 13Y | 14Y | 15Y | 16Y | 17Y | 18Y | 19Y | 20Y | 21Y | 22Y | 23Y | 24Y | 25Y | 26Y | 27Y | 28Y | 29Y | 30Y | 31Y | 32Y | Selects the X or Y point in the SOA mask for the specified power measurement. |
real - Returns the specified SOA mask X or Y point value.
:POWer:POWer<x>:SOA:RECAllmaskset / query
Recalls or queries the recall mask file name for the specified power measurement number. The power measurement number is given by x.
string - Returns the recall mask file name.
POWer:POWer1:SOA:RECAllmask? might return Tek000.msk, indicating the file name of the mask that will be recalled.
Recalls or queries the recall mask file name for the specified power measurement number.
string - The file name of the mask that will be recalled.
POWer:POWer1:SOA:RECAllmask? might return Tek000.msk, indicating the file name of the mask that will be recalled.
:POWer:POWer<x>:SOA:RECAllmask:FILENameset / query
Sets or queries the file name used for saving the SOA mask file name in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number. |
| filename | string | - | File name to use for saving the SOA mask file. |
string - Returns the file name for saving the SOA mask file name in the specified power measurement number.
POWer:POWer1:SOA:RECAllmask:FILEName
Sets or queries the file name for saving the SOA mask file name in the specified power measurement number. The power measurement number is specified by x.
string - Returns the configured SOA mask file name for the specified power measurement number.
POWer:POWer1:SOA:RECAllmask:FILEName
:POWer:POWer<x>:SOA:SAVemaskset / query
Saves the SOA mask file using the configured name and path for the specified power measurement number, or queries the mask file name, path, and file type. The power measurement number is specified by x.
string - Returns the mask file name, path, and file type for the SOA measurement in the specified power measurement number.
POWer:POWer1:SOA:SAVemask saves the mask file of SOA measurement as the configured file name at the configured path.
:POWer:POWer<x>:SOA:SAVemask:AUTOINCrementset / query
Sets or queries the state of auto-increment for saved SOA mask file names in the specified power measurement number. The power measurement number is specified by x.
Sets or queries the state of auto-increment for saved SOA mask file names in the specified power measurement number. The power measurement number is specified by x.
Saves the mask file using the configured name and path for the specified power measurement number, or queries the mask file name, path, and file type. The power measurement number is specified by x.
string - Returns the mask file name, path, and file type for the SOA measurement in the specified power measurement number.
POWer:POWer1:SOA:SAVemask saves the mask file of SOA measurement as the configured file name at the configured path.
:POWer:POWer<x>:SOA:SAVemask:FILENameset / query
Sets or queries the mask file name for SOA measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| filename | string | - | Mask file name for the SOA measurement. |
POWer:POWer1:SOA:SAVemask:FILEName "Tek001.msk"
Sets or queries the mask file name for SOA measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| filename | string | - | Mask file name for the SOA measurement. |
POWer:POWer1:SOA:SAVemask:FILEName "Tek001.msk"
:POWer:POWer<x>:SOA:SAVemask:FOLDerset / query
Sets or queries the mask file folder path for SOA measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| folder | string | - | Mask file folder path for SOA measurement. |
POWer:POWer1:SOA:SAVemask:FOLDer "C:" sets the mask file folder path for SOA measurement as C drive.
Sets or queries the mask file folder path for SOA measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| folder | string | - | Mask file folder path for the SOA measurement. |
POWer:POWer1:SOA:SAVemask:FOLDer "C:" sets the mask file folder path for SOA measurement as C drive.
:POWer:POWer<x>:SOA:VSOURceset / query
Sets or queries the source used for the SOA voltage measurement for the specified power measurement number. The source can be a channel, math waveform, or reference waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source for the SOA measurement. |
enum - Returns the selected SOA voltage source.
POWer:POWer1:SOA:VSOURce CH1 sets the voltage source for SOA measurement as channel 1.
Queries the voltage source used for SOA measurement for the specified power measurement number. The source can be a channel, math waveform, or reference waveform.
enum - Returns the selected voltage source for the SOA measurement.
POWer:POWer1:SOA:VSOURce CH1
:POWer:POWer<x>:SWITCHINGLOSS:DEVICETypeset / query
Sets or queries the conduction calculation method for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | MOSFET | BJT | Conduction calculation method for switching loss measurement. |
POWer:POWer1:SWITCHINGLOSS:DEVICEType MOSFET sets the conduction calculation method as mosfet for switching loss measurement of the power measurement badge Power 1.
Sets or queries the conduction calculation method for switching loss measurement in the specified power measurement number.
enum - Returns the conduction calculation method for switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:DEVICEType MOSFET sets the conduction calculation method as mosfet for switching loss measurement of the power measurement badge Power 1.
:POWer:POWer<x>:SWITCHINGLOSS:GATESOurceset / query
Sets the gate voltage (Vg) source for switching loss measurement of the specified power measurement. The power measurement number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | MATH1 | Gate voltage source for the switching loss measurement. |
POWer:POWer1:SWITCHINGLOSS:GATESOurce MATH1 sets the gate voltage (Vg) source for switching loss measurement of power measurement 1 as MATH1. POWer:POWer2:SWITCHINGLOSS:VSOURce? might return MATH3 indicating the gate voltage (Vg) for switching loss measurement of power measurement 2.
Sets or queries the gate voltage (Vg) source for switching loss measurement of the specified power measurement number. The power measurement number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | - | Gate voltage source for the switching loss measurement. |
enum - Returns the gate voltage (Vg) source for the switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:GATESOurce MATH1 sets the gate voltage (Vg) source for switching loss measurement of power measurement 1 as MATH1. POWer:POWer2:SWITCHINGLOSS:VSOURce? might return MATH3 indicating the gate voltage (Vg) for switching loss measurement of power measurement 2.
:POWer:POWer<x>:SWITCHINGLOSS:ILEVELAbsset / query
Sets or queries the current level (Ton-Start & Stop) in absolute units for switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | -100 - 100 | Absolute current level value for switching loss measurement. |
real - Returns the current level (Ton-Start & Stop) in absolute units for switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:ILEVELAbs 1.2 sets the current level (Ton-Start & Stop) value as 1.2 for the switching loss measurement in the power measurement badge 1.
Sets or queries the current level (Ton-Start & Stop) in absolute units for switching loss measurement in the specified power measurement number x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | -100 - 100 | Absolute current level value. |
real - Returns the current level (Ton-Start & Stop) in absolute units for the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:ILEVELAbs 1.2
:POWer:POWer<x>:SWITCHINGLOSS:ILEVELPctset / query
Sets or queries the current level (Ton-Start & Stop) in percentage for switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | -100 - 100 | Percentage current level for switching loss measurement. |
Sets the current level (Ton-Start & Stop) value as a percentage for the switching loss measurement in the specified power measurement badge.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 0.0001 - 90 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
POWer:POWer1:SWITCHINGLOSS:ILEVELPct 6
:POWer:POWer<x>:SWITCHINGLOSS:ISOURceset / query
Sets or queries the current source for the switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for the switching loss measurement. |
enum - Returns the current source for the switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:ISOURce CH2 POWer:POWer2:SWITCHINGLOSS:ISOURce?
Sets or queries the current source for the switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Current source for the switching loss measurement. |
enum - Returns the current source for the switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:ISOURce CH2 POWer:POWer2:SWITCHINGLOSS:ISOURce?
:POWer:POWer<x>:SWITCHINGLOSS:LEVELUNItsset / query
Sets or queries the level units for switching loss measurement in the specified power measurement number.
Sets or queries the level units for switching loss measurement in the specified power measurement number. PERCent sets High, Mid, and Low reference levels in percentage; ABSolute sets them to specific signal levels.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PERCent | ABSolute | Selects whether switching loss reference levels are specified as percentage or absolute signal levels. |
POWer:POWer1:SWITCHINGLOSS:LEVELUNIts ABSolute sets the level units as Absolute for switching loss measurement of the power measurement badge Power 1.
:POWer:POWer<x>:SWITCHINGLOSS:RDSOnset / query
Sets or queries the RDS(on) value for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0 - 100 | RDS(on) value for switching loss measurement. |
real - Returns the RDS(on) value for switching loss measurement in the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:RDSOn 2 sets the switching loss RDSOn value as 2 for switching loss measurement of the power measurement badge Power 1.
Sets or queries the RDS(on) value for switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
| RDSOn | real | 0 - 100 | RDS(on) value for switching loss measurement. |
POWer:POWer1:SWITCHINGLOSS:RDSOn 2
:POWer:POWer<x>:SWITCHINGLOSS:SWLCONFIGTypeset / query
Sets or queries the configuration type for the switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
Queries the configured switching-loss configuration type for the specified power measurement. The power measurement number is specified by x.
enum - Returns the switching-loss configuration type.
:POWer:POWer<x>:SWITCHINGLOSS:VCESatset / query
Sets or queries the VCE(sat) value for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | 0.001 - 100 | VCE(sat) value to set for the switching loss measurement. |
real - Returns the VCE(sat) value for the specified switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:VCESat 6 sets VCE(sat) value as 6 for switching loss measurement of the power measurement badge Power 1.
Sets or queries the VCE(sat) value for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
real - Returns the VCE(sat) value for switching loss measurement in the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:VCESat 6
:POWer:POWer<x>:SWITCHINGLOSS:VGLevelset / query
Sets or queries the gate voltage value (Vg Level Ton-Start) for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| value | real | –100 - 100 | Gate voltage value (Vg Level Ton-Start) for the switching loss measurement. |
real - Returns the gate voltage value (Vg Level Ton-Start) for the switching loss measurement in the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:VGLevel 1.2
Sets or queries the gate voltage value (Vg Level Ton-Start) for the switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number corresponding to the number shown on a power measurement badge in the UI. |
| value | real | -100 - 100 | Gate voltage value (Vg Level Ton-Start) for the switching loss measurement. |
real - Returns the gate voltage value (Vg Level Ton-Start) for the switching loss measurement in the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:VGLevel 1.2
:POWer:POWer<x>:SWITCHINGLOSS:VLEVELAbsset / query
Sets or queries the voltage level (Ton-Start & Stop) in absolute units for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | -100 - 100 | Voltage level value in absolute units. |
real - Returns the voltage level (Ton-Start & Stop) value in absolute units for the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:VLEVELAbs 2 sets the voltage level (Ton-Start & Stop) value as 2 for the switching loss measurement in the power measurement badge 1.
Sets or queries the voltage level (Ton-Start & Stop) in absolute units for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| value | real | –100 - 100 | Voltage level value in absolute units. |
real - Returns the voltage level (Ton-Start & Stop) in absolute units for the specified power measurement number.
POWer:POWer1:SWITCHINGLOSS:VLEVELAbs 2 sets the voltage level (Ton-Start & Stop) value as 2 for the switching loss measurement in the power measurement badge 1.
:POWer:POWer<x>:SWITCHINGLOSS:VLEVELPctset / query
Sets or queries the voltage level (Ton-Start & Stop) in percentage for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0.0001 - 90 | Voltage level in percent for the switching loss measurement. |
| x | integer | - | Power measurement number. |
POWer:POWer1:SWITCHINGLOSS:VLEVELPct 7 sets the voltage level (Ton-Start & Stop) value as 7 percentage for the switching loss measurement in the power measurement badge 1.
Sets or queries the voltage level (Ton-Start & Stop) in percentage for switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 0.0001 - 90 | Voltage level in percentage for the switching loss measurement. |
real (%) - Returns the voltage level (Ton-Start & Stop) in percentage for switching loss measurement.
POWer:POWer1:SWITCHINGLOSS:VLEVELPct 7
:POWer:POWer<x>:SWITCHINGLOSS:VSOURceset / query
Sets or queries the voltage source for the switching loss measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Voltage source specifier for the switching loss measurement. |
Sets or queries the voltage source for the switching loss measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Selects the voltage source for the switching loss measurement. |
POWer:POWer1:SWITCHINGLOSS:VSOURce CH1 POWer:POWer1:SWITCHINGLOSS:VSOURce?
:POWer:POWer<x>:SWITCHINGRIPPLE:INPUTSOurceset / query
Sets or queries the input source for switching ripple measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the switching ripple measurement. |
POWer:POWer1:SWITCHINGRIPPLE:INPUTSOurce CH5 sets the input source for switching ripple measurement as CH5 for the power measurement badge Power 1.
Sets or queries the input source for switching ripple measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the switching ripple measurement. |
enum - Returns the current input source for the switching ripple measurement.
POWer:POWer1:SWITCHINGRIPPLE:INPUTSOurce CH5 sets the input source for switching ripple measurement as CH5 for the power measurement badge Power 1.
:POWer:POWer<x>:SWITCHINGRIPPLE:LFREQuencyset / query
Sets or queries the switching frequency for switching ripple measurement in the specified power measurement number.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | - | Switching frequency value. |
POWer:POWer1:SWITCHINGRIPPLE:LFREQuency <NR1> POWer:POWer<x>:SWITCHINGRIPPLE:LFREQuency?
Sets or queries the switching frequency used for switching ripple measurement in the specified power measurement number. The power measurement number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | real | - | Switching frequency for switching ripple measurement. |
:POWer:POWer<x>:TURNOFFtime:FREQuencyset / query
Sets or queries the input frequency used by the AC or DC converter of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 1000000 | Power measurement number shown on a power measurement badge in the UI. |
| frequency | real | 1 - 500 | Frequency value for the Turn Off Time measurement. |
real (Hz) - Returns the frequency value of the specified Turn Off Time measurement, in Hz.
POWer:POWer1:TURNOFFtime:FREQuency 50 POWer:POWer4:TURNOFFtime:FREQuency?
Sets or queries the input frequency used by the AC or DC converter of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | 1 - 500 | Frequency value for the Turn Off Time measurement input converter. |
real (Hz) - Returns the frequency value of the specified Turn Off Time measurement.
POWer:POWer1:TURNOFFtime:FREQuency 50 POWer:POWer4:TURNOFFtime:FREQuency?
:POWer:POWer<x>:TURNOFFtime:INPUTLEVelset / query
Sets or queries the input voltage level of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 1000000 | Power measurement number shown on a power measurement badge in the UI. |
Sets or queries the input voltage level for the specified Turn Off Time measurement. The level is specified as a floating-point voltage from -500 V to 500 V.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | -500 - 500 | Input voltage level for the Turn Off Time measurement. |
real (V) - Returns the input voltage level of the specified Turn Off Time measurement.
POWer:POWer1:TURNOFFtime:INPUTLEVel -350 sets the input voltage level of Turn Off Time measurement 1 to – 350 V. POWer:POWer4:TURNOFFtime:INPUTLEVel? might return POWer:POWer4:TURNOFFtime:INPUTLEVel 200, indicating that the input voltage level value of Turn Off Time measurement 4 is set to 200 V.
:POWer:POWer<x>:TURNOFFtime:INPUTSOurceset / query
Sets or queries the input source of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | integer | - | The power measurement number corresponding to the number shown on a power measurement badge in the UI. |
| source | enum | CH<x> | REF<x> | MATH<x> | Selects the input source as a channel, reference waveform, or math waveform. |
POWer:POWer1:TURNOFFtime:INPUTSOurce CH4 POWer:POWer6:TURNOFFtime:INPUTSOurce? might return POWer:POWer6:TURNOFFtime:INPUTSOurce MATH2
Sets or queries the input source of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Input source for the specified Turn Off Time measurement. |
enum - Returns the current input source of the specified Turn Off Time measurement.
POWer:POWer1:TURNOFFtime:INPUTSOurce CH4 POWer:POWer6:TURNOFFtime:INPUTSOurce?
:POWer:POWer<x>:TURNOFFtime:MAXTIMeset / query
Sets or queries the maximum time value of the specified Turn Off Time power measurement. The maximum time value is a floating point number in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | 1 - 500 | Maximum time value in seconds. |
POWer:POWer1:TURNOFFtime:MAXTIMe 70 POWer:POWer5:TURNOFFtime:MAXTIMe?
Sets or queries the maximum time value of the specified Turn Off Time measurement. The maximum time value is a floating point number in seconds from 1 to 500.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
real (s) - Returns the maximum time value of the specified Turn Off Time measurement, in seconds.
POWer:POWer1:TURNOFFtime:MAXTIMe 70 POWer:POWer5:TURNOFFtime:MAXTIMe? might return POWer:POWer5:TURNOFFtime:MAXTIMe 120, indicating that the maximum time value of Turn Off Time measurement 5 is 120 seconds.
:POWer:POWer<x>:TURNOFFtime:MAXVoltageset / query
Sets or queries the maximum voltage of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | 1 | Power measurement number; equivalent to the number shown on a power measurement badge in the UI. |
| voltage | real | 1 V - 500 V | Maximum voltage value for the Turn Off Time measurement. |
real (V) - Returns the maximum voltage value of the specified Turn Off Time measurement.
POWer:POWer1:TURNOFFtime:MAXVoltage 50 sets the maximum voltage value of Turn Off Time measurement 1 to POWer:POWer4:TURNOFFtime:MAXVoltage? might return POWer:POWer4:TURNOFFtime:MAXVoltage 12, indicating that the maximum voltage value of Turn Off Time measurement 4 is 12 volts.
Sets or queries the maximum voltage of the specified Turn Off Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| voltage | real | 1 V - 500 V | Maximum voltage value for the Turn Off Time measurement. |
real (V) - Returns the maximum voltage value of the specified Turn Off Time measurement.
POWer:POWer1:TURNOFFtime:MAXVoltage 50 sets the maximum voltage value of Turn Off Time measurement 1 to POWer:POWer4:TURNOFFtime:MAXVoltage? might return POWer:POWer4:TURNOFFtime:MAXVoltage 12, notes
:POWer:POWer<x>:TURNOFFtime:NUMOUTputsset / query
Sets or queries the number of outputs for the specified Turn Off Time measurement. POWer<x> identifies the power measurement number; ONE through SEVEN selects the number of outputs.
| Name | Type | Values | Description |
|---|---|---|---|
| count | enum | ONE | TWO | THREE | FOUR | FIVE | SIX | SEVEN | Number of outputs for the Turn Off Time measurement. |
POWer:POWer1:TURNOFFtime:NUMOUTputs TWO POWer:POWer3:TURNOFFtime:NUMOUTputs?
Queries the source assigned to output 1 of the specified Turn Off Time measurement. The source can be a channel, reference waveform, or math waveform.
enum - Returns the output 1 source setting for the specified Turn Off Time measurement.
POWer:POWer3:TURNOFFtime:NUMOUTputs? might return POWer:POWer3:TURNOFFtime:NUMOUTputs FOUR, POWer:POWer:POWer1:TURNOFFtime:NUMOUTputs TWO sets the number of outputs of Turn Off Time measurement 1 to two.
:POWer:POWer<x>:TURNOFFtime:OUTPUT1SOURceset / query
Sets or queries the source for output 1 of the specified Turn Off Time measurement. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Source for output 1. |
enum - Returns the current output 1 source of the specified Turn Off Time measurement.
:POWer:POWer<x>:TURNOFFtime:OUTPUT1VOLTageset / query
Sets or queries the output 1 voltage level of the specified Turn Off Time power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | 1 | The power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| voltage | real | -6000 - +6000 | Sets the output voltage value. |
real (V) - Returns the output 1 voltage value of the specified Turn Off Time power measurement.
POWer:POWer7:TURNOFFtime:OUTPUT1VOLTage -2550 POWer:POWer3:TURNOFFtime:OUTPUT1VOLTage? might return POWer:POWer3:TURNOFFtime:OUTPUT1VOLTage 1000, indicating that the output 1 voltage value of Turn Off Time power measurement 3 is set to 1,000 volts.
:POWer:POWer<x>:TURNOFFtime:TYPEset / query
Sets or queries the type of AC/DC converter used in the specified Turn Off Time power measurement. Requires option PWR or PS2.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DCDC | ACDC | Selects the converter type used for the measurement. |
enum - Returns the current converter type used in the specified Turn Off Time power measurement.
:POWer:POWer<x>:TURNONtime:FREQuencyset / query
Sets or queries the input frequency used by the AC or DC converter of the specified Turn On Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| POWer<x> | real | 1 Hz - 500 Hz | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
real (Hz) - The frequency value of the AC/DC converter in the specified Turn On Time measurement.
POWer:POWer1:TURNONtime:FREQuency 50 POWer:POWer4:TURNONtime:FREQuency?
:POWer:POWer<x>:TURNONtime:INPUTLEVelset / query
Sets or returns the input voltage level of the specified Turn On Time measurement. The value is a floating-point voltage level in the range –500 V to 500 V.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | - | Power measurement number, equivalent to the number shown on the power measurement badge in the UI. |
| inputlevel | real | –500 - 500 | Input voltage level for the specified Turn On Time measurement. |
:POWer:POWer<x>:TURNONtime:INPUTSOurceset / query
Sets or queries the input source of the specified Turn On Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | Input source for the selected Turn On Time measurement; CH<x> is a channel specifier, MATH<x> a math waveform specifier, and REF<x> a reference waveform specifier. |
enum - Returns the current input source of the specified Turn On Time measurement.
POWer:POWer1:TURNONtime:INPUTSOurce CH2 POWer:POWer2:TURNONtime:INPUTSOurce? might return POWer:POWer2:TURNONtime:INPUTSOurce MATH6
:POWer:POWer<x>:TURNONtime:MAXTIMeset / query
Sets or returns the maximum turn on time of the specified Turn On Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 1 - 500 | Maximum time value. |
:POWer:POWer<x>:TURNONtime:MAXVoltageset / query
Sets or returns the maximum voltage setting of the specified Turn On Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | Power measurement number shown on the measurement badge in the UI. |
| maximum voltage | real | 1 - 500 | Maximum voltage for the Turn On Time measurement. |
real (V) - Returns the maximum voltage setting of the specified Turn On Time measurement.
POWer:POWer1:TURNONtime:MAXVoltage 50 sets the maximum voltage value of Turn On Time measurement 1 to 50 volts. POWer:POWer4:TURNONtime:MAXVoltage? might return POWer:POWer4:TURNONtime:MAXVoltage 12, indicating that the maximum voltage value of Turn On Time measurement 4 is set to 12 volts.
:POWer:POWer<x>:TURNONtime:NUMOUTputsset / query
Sets or queries the number of outputs for the specified Turn On Time power measurement.
enum - Returns the current number of outputs for the specified Turn On Time power measurement.
:POWer:POWer<x>:TURNONtime:OUTPUT1SOURceset / query
Sets or queries the output 1 source of the specified Turn On Time measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | REF<x> | MATH<x> | Source for output 1. |
enum - Returns the output 1 source of the specified Turn On Time measurement.
:POWer:POWer<x>:TURNONtime:OUTPUT1VOLTageset / query
Sets or queries the output 1 voltage level of the specified Turn On Time power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| power measurement number | integer | - | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| voltage | real | –6,000 - +6,000 | Output voltage value to set. |
real (V) - Returns the output 1 voltage value of the specified Turn On Time power measurement.
POWer:POWer1:TURNONtime:OUTPUT1VOLTage -2550 sets the output 1 voltage value of Turn On Time power measurement 1 to –2,550 volts. POWer:POWer3:TURNONtime:OUTPUT1VOLTage? might return POWer:POWer3:TURNONtime:OUTPUT1VOLTage 1000, indicating that the output 1 voltage value of Turn On Time power measurement 3 is set to 1,000 volts.
:POWer:POWer<x>:TURNONtime:TYPEset / query
Sets or queries the type of AC/DC converter used in the specified Turn On Time power measurement.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | DCDC | ACDC | Selects the converter type used for the measurement. |
enum - Returns the current converter type setting.
POWer:POWer<x>:TURNONtime:TYPE {DCDC|ACDC}
POWer:POWer<x>:TURNONtime:TYPE?:POWer:POWer<x>:TYPeset / query
Sets or queries the measurement type of the specified power measurement number. If the measurement number does not exist, the command creates a new power measurement, assigns the specified number, and sets its type.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 | Power measurement number, equivalent to the number shown on a power measurement badge in the UI. |
| Measurement Type | enum | CYCLEAmp | CYCLEBase | CYCLEMAx | CYCLEMIn | CYCLEPKpk | CYCLETop | DIDT | DVDT | EFFICIENCY | FREQuency | HARMonics | IMPEDANCE | INDUCTANCE | INPUTCAP | INRUSHcurrent | IVSINTEGRALV | LINERIpple | MAGNETICLOSS | MAGPROPERTY | NDUTYCycle | NPULSEWidth | PDUTYCycle | PERIod | POWERQUALity | PPULSEWidth | RDSON | SOA | SWITCHINGLOss | SWITCHINGRIpple | TURNOFFtime | TURNONtime | CLRESPONSE | PSRR | Measurement type to assign to the specified power measurement. |
POWer:POWer6:TYPe INDUCTANCE sets power measurement 6 to be an Inductance measurement. POWer:POWer1:TYPe? might return INPUTCAP, indicating that power measurement 1 is an Input Capacitance measurement.
:POWer:POWer<x>:WRAP:DEGreesset / query
Sets or returns the phase wrap value for FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Phase wrap value. |
:POWer:POWer<x>:WRAP:STATEset / query
Sets or returns the phase wrap status for FRA measurements.
| Name | Type | Values | Description |
|---|---|---|---|
| power<x> | integer | - | The power measurement number shown on the power measurement badge in the UI. |
| state | enum | ON | OFF | Turns phase wrap on or off for FRA measurements. |
enum - Returns the phase wrap status for FRA measurements.
POWer:POWer1:WRAP:STATE ON turns on phase wrap for FRA measurements. POWer:POWer1:WRAP:STATE? might return POWer:POWer1:WRAP:STATE OFF, indicating that phase wrap has been turned off for FRA measurements for power measurement 1.
:RECAll:EYEMASKset / query
Recalls an eye mask definition from a source file into the specified destination mask. The eye diagram view must be selected before executing the command, and option DJA is required.
| Name | Type | Values | Description |
|---|---|---|---|
| source file | string | - | Source file containing the eye mask definition. |
| MASK<x> | string | - | Destination mask. |
DISPLAY:SELECT:VIEW PLOTVIEW1 RECALL:EYEMASK "MaskWD17.xml",MASK1
:RECAll:MASKset / query
Recalls a saved mask definition from a mask file. If the specified mask test already exists, the associated mask is replaced; otherwise a new mask test is created.
| Name | Type | Values | Description |
|---|---|---|---|
| source file | string | - | Source file containing the mask definition. |
| mask | string | - | Destination mask test to store the recalled mask into. |
RECAll:MASK <source file>,MASK<x>
:RECAll:SESsionset / query
Restores the state of the instrument, including reference waveforms, from a saved session file.
| Name | Type | Values | Description |
|---|---|---|---|
| file_path | string | - | The file path that specifies the location of the specified instrument session file. |
RECALL:SESSION "TEK00000.TSS" recalls the setup from the file TEK00000.TSS in the current working directory.
:RECAll:SETUPset / query
Recalls an instrument setup from a file or restores the factory setup. It makes the recalled setup current.
| Name | Type | Values | Description |
|---|---|---|---|
| file_path | string | - | Quoted setup file name and path, or the keyword FACTory to restore the factory setup. |
RECALL:SETUP FACTORY recalls (and makes current) the instrument setup to its factory defaults. RECALL:SETUP "TEK00000.SET" recalls the setup from the file TEK00000.SET in the default directory for setups.
:RECAll:SETUpset / query
Recalls a saved setup from the specified file, or recalls the factory setup when FACTory is specified. This command is supported by the Operation Complete function.
| Name | Type | Values | Description |
|---|---|---|---|
| fileopt | string | - | Quoted string file name to recall, or the keyword FACTory. |
:RECAll:WAVEformset / query
Recalls a waveform from a file into a reference waveform. This operation supports Operation Complete.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | An .ISF or .CSV file specified as the source waveform file. |
| reference | string | - | The destination reference waveform, REF<x>. |
:REF:ADDNewset / query
Adds the specified reference. The argument is of the form REF<NR1>, with NR1 greater than or equal to 1.
| Name | Type | Values | Description |
|---|---|---|---|
| reference | integer | 1 | Reference number to add. |
:REF:DELeteset / query
Deletes the specified reference. The argument must be a reference name of the form "REF<NR1>" with NR1 1.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The specified reference, in the form "REF<NR1>" where NR1 1. |
REF:DELETE "REF2" deletes reference 2 from the display.
:REF:LIST?query
Returns a comma separated list of all currently defined references.
string - All currently defined references.
REF:LIST? might return REF:LIST REF1,REF2 indicating references 1 and 2 are defined.
:REF:REF<x>:DESKewset / query
Sets the deskew value for the specified reference. The value is a numeric NR3 deskew amount.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | - | Deskew value used for the specified reference. |
REF:REF1:DESKew -1.5e-9 sets the deskew value to -1.5 ns.
:REF:REF<x>:LABel:COLorset / query
Sets or queries the color of the specified ref label.
| Name | Type | Values | Description |
|---|---|---|---|
| label | string | - | The label color value, including an empty string to restore the default color. |
string - Returns the current font color of the specified ref label as a quoted string.
REF:REF1:LABel:COLor "#FFFF00" sets the font color to yellow. REF:REF1:LABel:COLor? might return REF:REF1:LABEL:COLOR "#FF0000" indicating the font color is red.
:REF:REF<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified reference label.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Bold font state for the reference label. |
enum - Returns the bold state of the specified reference label.
:REF:REF<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified reference label.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Enables or disables italic font. |
enum - Returns the italic state of the specified reference label.
REF:REF1:LABel:FONT:ITALic ON turns on the italic font. REF:REF1:LABel:FONT:ITALic? might return REF:REF1:LABEL:FONT:ITALIC 0 indicating the italic font is off.
:REF:REF<x>:LABel:FONT:SIZEset / query
Sets or queries the font size of the specified reference label.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | Font size of the label. |
integer (points) - Returns the font size of the label.
REF:REF1:LABel:FONT:SIZE 20 sets the font size to 20 points. REF:REF1:LABel:FONT:SIZE? might return REF:REF1:LABEL:FONT:SIZE 14 indicating that the font size is 14 points.
:REF:REF<x>:LABel:FONT:TYPEset / query
Sets or queries the font type used for the specified reference label.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The font type. |
string - Returns the current reference label font type.
REF:REF1:LABel:FONT:TYPE "Monospace" specifies a mono spaced font. REF:REF1:LABel:FONT:TYPE? might return REF:REF1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:REF:REF<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified reference label.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NR1 | OFF | ON | Underline state to apply to the reference label; <NR1> disables underline font when 0 and turns it on for any other value. |
enum - Returns the underline state of the specified reference label as 0 when underline is off, or 1/any nonzero value when it is on.
REF:REF1:LABel:FONT:UNDERline ON turns on the underline font. REF:REF1:LABel:FONT:UNDERline? might return REF:REF1:LABEL:FONT:UNDERLINE 0 indicating that underline is off.
:REF:REF<x>:LABel:NAMeset / query
Sets or queries the label name of the specified reference waveform. The reference waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The character string used for the reference waveform label name. |
REF:REF4:LABEL:NAME "My Reference" REF:REF3:LABEL:NAME? might return REF:REF3:LABEL:NAME "Signal2"
:REF:REF<x>:LABel:XPOSset / query
Sets or queries the X-position of the label attached to the displayed waveform of the specified reference, relative to the left edge of the waveview. The reference waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Location in divisions where the waveform label is displayed relative to the left edge of the screen. |
REF:REF4:LABEL:XPOS 10 REF:REF2:LABEL:XPOS?
:REF:REF<x>:LABel:YPOSset / query
Sets or queries the Y-position of the label attached to the displayed waveform of the specified reference, relative to the baseline of the waveform. The reference waveform is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Location where the waveform label for the selected reference is displayed, relative to the baseline of the waveform. |
real - Returns the current Y-position of the waveform label, relative to the baseline of the waveform.
REF:REF3:LABEL:YPOS -10 REF:REF2:LABEL:YPOS?
:REF:REF<x>:SOUrceset / query
Sets the source of the reference file. The argument is the reference file name.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Reference file name. |
REF:REF1:SOUrce "/home/guest/.local/share/Tektronix/TekScope/ FirstRecalledSession/161012_132000_000.wfm" REF:REF1:SOUrce? might return REF:REF1:SOURCE "/home/guest/.local/share/Tektronix/TekScope/LastRecalledSession/161012_132039_000.wfm"
:REF<x>_DALL:LABel:COLorset / query
Sets or queries the color of the specified digital group. The reference is specified by x.
:REF<x>_DALL:LABel:FONT:BOLDset / query
Sets or queries the bold state of the specified digital group label. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Bold font state. |
enum - Returns the bold state of the specified digital group as 0 for not bold and any other value for bold.
REF1_DALL:LABel:FONT:BOLD ON REF1_DALL:LABel:FONT:BOLD?
:REF<x>_DALL:LABel:FONT:ITALicset / query
Sets or queries the italic state of the specified digital group. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Turns italic font on or off, or sets the state using a numeric value. |
:REF<x>_DALL:LABel:FONT:SIZEset / query
Sets or queries the font size of the specified digital group. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | The font size. |
REF1_DALL:LABel:FONT:SIZE 16 sets the font size to 16 points. REF1_DALL:LABel:FONT:SIZE? might return REF1_DALL:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
:REF<x>_DALL:LABel:FONT:TYPEset / query
Sets or queries the font type of the specified digital group. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | string | - | The font type. |
string - Returns the font type.
REF1_DALL:LABel:FONT:TYPE "Monospace" sets the font to a monospace font. REF1_DALL:LABel:FONT:TYPE? might return REF1_DALL:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:REF<x>_DALL:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the specified digital group label font. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Turns underline font on or off; <NR1>=0 turns it off and any other value turns it on. |
enum - Returns the underline state of the specified digital group label font, reported as 0 when underline is off.
REF1_DALL:LABel:FONT:UNDERline ON specifies an underlined font. REF1_DALL:LABel:FONT:UNDERline? might return REF1_DALL:LABEL:FONT:UNDERLINE 0 indicating underline is off.
:REF<x>_DALL:LABel:NAMeset / query
Sets or queries the name of the specified digital group label. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The name of the group. |
string - Returns the label name of the specified digital group.
REF1_DALL:LABel:NAMe "Clock Out" sets the label name to Clock Out. REF1_DALL:LABel:NAMe? might return REF1_DALL:LABEL:NAME "This is the digital name".
:REF<x>_DALL:LABel:XPOSset / query
Sets or queries the x-position of the label of the specified digital group, in pixels relative to the left edge of the display. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x-position | real | pixels | X-position of the label, relative to the left edge of the display. |
real (pixels) - Returns the x-position of the label in pixels relative to the left edge of the display.
REF1_DALL:LABel:XPOS 90.0e0 sets the x position of the label to 90.
:REF<x>_DALL:LABel:YPOSset / query
Sets or queries the y-position of the label of the specified digital group. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| y-position | real | pixels | Y-position of the label, in pixels relative to the baseline of the waveform. |
real (pixels) - Returns the y-position of the label, in pixels relative to the baseline of the waveform.
REF1_DALL:LABel:YPOS 50 REF1_DALL:LABel:YPOS? might return REF1_DALL:LABEL:YPOS 0.0E+0 indicating the y position of the label is at the baseline of the waveform.
:REF<x>_D<x>:LABel:COLorset / query
Sets or queries the color of the label of the specified digital bit. The reference and bit are specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| color | string | - | Label color; send an empty string to return the color to the default color. |
string - Returns the current label color as a quoted string.
REF1_D1:LABel:COLor "#FF0000" REF1_D1:LABel:COLor? might return REF1_D1:LABEL:COLOR "#FFFF00" indicating the color is yellow.
:REF<x>_D<x>:LABel:FONT:BOLDset / query
Sets or queries the bold state of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Bold state of the label. |
:REF<x>_D<x>:LABel:FONT:ITALicset / query
Sets or queries the italic state of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Italic font state or numeric equivalent; 0 turns off italic font and any other value turns it on. |
enum - Returns the italic state of the label of the specified digital bit.
REF1_D1:LABel:FONT:ITALic OFF turns off italic font. REF1_D1:LABel:FONT:ITALic? might return REF1_D1:LABEL:FONT:ITALIC 1 indicating the font is italic.
:REF<x>_D<x>:LABel:FONT:SIZEset / query
Sets or queries the font size of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | The font size. |
integer - Returns the font size.
REF1_D1:LABel:FONT:SIZE 16 sets the font size to 16 points. REF1_D1:LABel:FONT:SIZE? might return REF1_D1:LABEL:FONT:SIZE 20 indicating the font size is 20 points.
:REF<x>_D<x>:LABel:FONT:TYPEset / query
Sets or queries the font type of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Font type of the label. |
REF1_D1:LABel:FONT:TYPE "Monospace" sets the font to Monospace. REF1_D1:LABel:FONT:TYPE? might return REF1_D1:LABEL:FONT:TYPE "Frutiger LT Std 55 Roman".
:REF<x>_D<x>:LABel:FONT:UNDERlineset / query
Sets or queries the underline state of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Underline font state; OFF turns it off, ON turns it on, and <NR1> uses 0 for off and any other value for on. |
enum - Returns the underline font state of the specified digital bit label.
REF1_D1:LABel:FONT:UNDERline ON turns on underline font. REF1_D1:LABel:FONT:UNDERline? might return REF1_D1:LABEL:FONT:UNDERLINE 0 indicating the underline font is off.
:REF<x>_D<x>:LABel:NAMeset / query
Sets or queries the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The label of the specified digital bit. |
string - Returns the label of the specified digital bit.
:REF<x>_D<x>:LABel:XPOSset / query
Sets or queries the x-position of the label of the specified digital bit. The reference is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x-position | real | pixels | The x-position of the label, in pixels relative to the left edge of the display. |
real (pixels) - The x-position of the label, in pixels relative to the left edge of the display.
REF1_D1:LABel:XPOS 90 sets the x position to 90. REF1_D1:LABel:XPOS? might return REF1_D1:LABEL:XPOS 45.0000 indicating the position is 45 pixels to the right of the left edge of the waveform.
:REF<x>_D<x>:LABel:YPOSset / query
Sets or queries the y-position of the label of the specified digital bit. The channel is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| y-position | real | pixels | Y-position of the label, in pixels relative to the waveform baseline. |
real (pixels) - Returns the y-position of the label in pixels relative to the waveform baseline.
REF1_D1:LABel:YPOS 10 REF1_D1:LABel:YPOS?
:REMset / query
Embeds a comment within programs for internal documentation; the instrument ignores the comment line. This command has no query form.
| Name | Type | Values | Description |
|---|---|---|---|
| comment | string | - | String comment to embed in the program. |
REM "This is a comment" is a comment string that the instrument will ignore.
:ROSc:SOUrceset / query
Sets or queries the selected source for the time base reference oscillator. The reference oscillator locks to the chosen source, which may be internal, external, or tracking.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | INTERnal | EXTernal | TRACking | Selects the time base reference source. |
enum - Returns the selected time base reference source.
:ROSc:STATE?query
Returns whether the time base reference oscillator is locked. The query returns either LOCKED or UNLOCKED.
enum - Indicates whether the time base reference oscillator is locked.
ROSC:STATE? might return ROSC:STATE LOCKED, indicating that the time base reference is locked.
:ROSC:SOURCEset / query
Sets the reference oscillator source. The factory default is INTERNAL.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | INTERNAL | Reference oscillator source. |
:SAVe:EVENTtable:BUSset / query
Saves the bus results table to the specified file.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | The specified file name or path. |
SAVe:EVENTtable:BUS "TEK000.CSV" saves the bus decode event table in the file named TEK000.CSV.
:SAVe:EVENTtable:CUSTomset / query
Sets the instrument to save the results table in a specified file. The file argument may be a complete path or a path relative to the current working directory.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | Specified file name or path to use for saving the results table. |
SAVe:EVENTtable:CUSTom "C:/TEK000.CSV" sets the instrument to save the results table in the top level C: directory in a file named TEK000.CSV.
:SAVe:EVENTtable:CUSTom:COMMentsset / query
Sets or queries comments to be included in saved results table files. The setter saves the quoted string as a comment in the saved results table file; the query returns the current comment, if any.
| Name | Type | Values | Description |
|---|---|---|---|
| comment | string | - | Quoted string to save as a comment in the results table file. |
string - The current saved comment, or an empty string if no comment is set.
SAVe:EVENTtable:CUSTom:COMMents "PSRR batch 2 testing." SAVe:EVENTtable:CUSTom:COMMents?
:SAVe:EVENTtable:CUSTom:DATAFormatset / query
Sets or queries the data format used when saving results table data. Scientific notation and engineering notation are supported.
enum - Returns the current data format used for saved results table data.
:SAVe:EVENTtable:CUSTom:INCLUDEREFsset / query
Sets or queries whether to include displayed reference waveforms with saved results table files.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | 1 saves all displayed reference waveforms as part of a saved results table file; 0 does not save them. |
enum - Returns whether all displayed reference waveforms will be saved as part of the saved results table file.
SAVe:EVENTtable:CUSTom:INCLUDEREFs 1 SAVe:EVENTtable:CUSTom:INCLUDEREFs? might return 0, indicating that the instrument will not save all displayed reference waveforms as part of a saved results table file.
:SAVe:EVENTtable:MEASUrementset / query
Saves measurement results data to the specified file. The file argument may be a complete path or a path relative to the current working directory.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The specified file name or path. |
SAVe:EVENTtable:MEASUrement "TEK000.CSV" saves the measurement in the file named TEK000.CSV.
:SAVe:EVENTtable:PEAKSset / query
Saves peak markers results table data to the specified file.
:SAVe:EVENTtable:SEARCHTableset / query
Saves a search results table to the specified file.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | Specified file name or path for the saved search results table. |
SAVe:EVENTtable:SEARCHTable "C:\Users\Tek_Local_Admin\Tektronix\TekScope\Results Tables\Tek002.csv" saves the search results table in the file named TEK002.CSV.
:SAVe:EYEMASKset / query
Saves the given eye mask to the specified file. The file argument may include an optional path; if omitted, the file is saved to the current working directory set by FILESystem:CWD.
| Name | Type | Values | Description |
|---|---|---|---|
| filename | string | - | Specified file name, with optional path, used to create the XML file. |
SAVe:EYEMASK "<filename>.xml"
:SAVe:IMAGe:COMPositionset / query
Sets or queries the color mode for saved images. The mode can be normal or inverted.
:SAVe:IMAGe:VIEWTYpeset / query
Sets or queries the view type for saved images. Currently only FULLScreen is supported.
enum - Returns the saved image view type.
SAVE:IMAGE:VIEWTYPE FULLScreen sets the screen capture mode to capture the full screen. SAVE:IMAGE:VIEWTYPE? might return FULLScreen, indicating that the screen capture mode is set to full screen.
:SAVe:MASKset / query
Saves the given Waveview Mask to the specified file. The file argument may include an optional path; if no path is entered, the file is saved to the current working directory set by FILESystem:CWD.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | Specifies the file name and optional path for the mask file to be saved. |
:SAVe:PLOTDataset / query
Saves plot data to the specified file. Use a .CSV file extension, and the file path is interpreted relative to the current working directory unless a complete path is specified.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Sets the file name and location used to store the plot data. |
SAVE:PLOTDATA "plot1.csv" saves the plot to the designated file in the current working directory. SAVe:PLOTData "C:/plot1.csv" (On standard instruments) SAVe:PLOTData "C:\Temp\plot1.csv" (On instruments with optional Windows 10).
:SAVe:REPOrtset / query
Saves a report to the specified file. Supported report formats are PDF and MHT (web page archive file).
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | The complete path specification used as the report file name and location. |
:SAVe:REPOrt:COMMentsset / query
Sets or queries the comments to be included in saved report files.
| Name | Type | Values | Description |
|---|---|---|---|
| comments | string | - | The comments to be included in saved report files. |
string - The saved report comments string, returned in the form :SAVE:REPORT:COMMENTS "...".
SAVE:REPORT:COMMENTS "Test 3" adds comments to the report. SAVE:REPORT:COMMENTS? might return :SAVE:REPORT:COMMENTS "High Temp Test 1".
:SAVe:SESsionset / query
Saves the state of the instrument, including reference waveforms, to a saved session file.
| Name | Type | Values | Description |
|---|---|---|---|
| file path | string | - | The file path that specifies the location to save the specified instrument session file. |
:SAVe:SETUp:INCLUDEREFsset / query
Sets or queries whether displayed reference waveforms are included in saved setups.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Specifies whether displayed reference waveforms are included in saved setups. |
enum - Returns whether displayed reference waveforms are included in saved setups.
SAVe:SETUp:INCLUDEREFs 0 SAVe:SETUP:INCLUDEREFS?
:SAVe:WAVEform:GATingset / query
Specifies the method used to save either part of the waveform data or the entire waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| gating | enum | NONe | CURSors | SCREEN | RESAMPLE | SELected | Selects which portion of the waveform is saved. |
enum - Returns the current waveform save gating mode.
SAVe:WAVEform:GATing NONe SAVE:WAVEFORM:GATING? might return :SAVe:WAVEform:GATing SCREEN, indicating the save waveform operation is set to save the waveform data on the screen.
:SAVe:WAVEform:GATing:RESAMPLErateset / query
Sets the resample interval used when saving waveform data with gating. The value specifies how often data points are saved.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | real | - | Specifies the resample interval. |
SAVe:WAVEFORM:GATING:RESAMPLERATE 3 SAVe:WAVEFORM:GATING:RESAMPLERATE?
Returns a list of the available waveforms that can be specified as the source for the SAVE:WAVEFORM command. Source waveforms must have their display mode set to On to appear in the list and be saved.
enum - Returns the available waveform sources as a comma-separated list.
SAVE:WAVEFORM:SOURCELIST? might return ALL,CH2,CH3,CH8,MATH1,MATH2,REF2,REF4.
:SAVe:IMAGeset / query
Saves an image to a quoted file name.
| Name | Type | Values | Description |
|---|---|---|---|
| file as quoted string | string | - | Destination file name for the saved image. |
SAVe:IMAGe <file as quoted string>
:SAVe:SETUpset / query
Saves the current setup to the specified file. This command supports Operation Complete synchronization.
| Name | Type | Values | Description |
|---|---|---|---|
| file | string | - | File name as a quoted string. |
:SAVe:WAVEformset / query
Saves a waveform to a reference location or file. This command is one of the operations that can generate an Operation Complete event.
| Name | Type | Values | Description |
|---|---|---|---|
| source wfm | - | - | Waveform source to save. |
| REF<x>opt | - | - | Reference location to save the waveform to. |
| fileopt | - | - | File to save the waveform to. |
:SAVE:ASSIGN:TYPEset / query
Sets the file type used for save assignment operations. The factory default is WAVEFORM.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | WAVEFORM | File type used for save assignment operations. |
:SAVE:IMAGE:FILEFORMATset / query
Sets the file format used when saving images. The factory default is PNG.
| Name | Type | Values | Description |
|---|---|---|---|
| format | enum | PNG | Image file format. |
:SAVE:IMAGE:INKSAVERset / query
Sets whether image saving uses ink saver mode. Factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | 0 - 1 | Ink saver mode state. |
:SAVE:IMAGE:LAYOUTset / query
Sets the image layout used for saved images. The factory default is PORTRAIT.
| Name | Type | Values | Description |
|---|---|---|---|
| layout | enum | PORTRAIT | Image layout selection. |
:SAVE:WAVEFORMset / query
Sets the default file name used for saving waveform data.
:SAVE:WAVEFORM:GATINGset / query
Sets the gating mode used when saving waveform data. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| gating | enum | NONE | Gating mode for saved waveforms. |
:SAVEONEVent:FILEDestset / query
Sets or queries the location where files are saved. This command replaces SAVEON:FILE:DEST, which remains a valid alias.
| Name | Type | Values | Description |
|---|---|---|---|
| location | string | - | Location to store files. |
string - For the query form, returns the saved file location path used when a trigger occurs.
SAVEONEVENT:FILEDEST"C:\users\username\Tektronix\TekScope\SaveOnTrigger" SAVEONEVENT:FILEDEST?
:SAVEONEVent:FILENameset / query
Sets or queries the file name without the extension for files saved on an event. This command replaces SAVEON:FILE:NAME, which remains a valid alias.
SAVEONEVent:FILEName SAVEONEVent:FILEName?
:SAVEONEVent:IMAGe:FILEFormatset / query
Sets or returns the image file extension used for saved images. The valid formats are PNG, BMP, and JPG; this command replaces the older SAVEON:IMAGe:FILEFormat alias.
| Name | Type | Values | Description |
|---|---|---|---|
| format | enum | PNG | BMP | JPG | Selects the image file format for saved image files. |
enum - Returns the current image file format setting.
SAVEONEVENT:IMAGE:FILEFORMAT JPG SAVEONEVENT:IMAGE:FILEFORMAT? might return SAVEON:IMAGE:FILEFORMAT PNG
:SAVEONEVent:WAVEform:FILEFormatset / query
Sets or returns the waveform file extension. This command replaces SAVEON:WAVEform:FILEFormat, which remains valid as an alias.
| Name | Type | Values | Description |
|---|---|---|---|
| format | enum | INTERNal | SPREADSheet | MATlab | Selects the waveform file format. |
enum - Returns the current waveform file format.
SAVEONEVENT:WAVEFORM:FILEFORMAT {INTERNal|SPREADSheet|MATlab}
SAVEONEVENT:WAVEFORM:FILEFORMAT?:SAVEONEVent:WAVEform:SOUrceset / query
Sets or returns the source waveform(s) used for saving when an event occurs. It replaces SAVEON:WAVEform:SOURce, which remains valid as an alias.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | ALL | Selects an analog, math, reference, or all waveforms as the save-on sources. |
enum - Returns the current save-on source setting.
SAVEONEVENT:WAVEFORM:SOURCE MATH1 SAVEONEVENT:WAVEFORM:SOURCE?
:SAVEON:FILE:DESTset / query
Sets or queries the location where files are saved when SAVEON:TRIGGER is ON and SAVEON:WAVEFORM is ON. The location can be a local drive, network path, or USB drive.
| Name | Type | Values | Description |
|---|---|---|---|
| location | string | - | Location to store files. |
:SAVEON:FILE:NAMEset / query
Sets or queries the file name to use when SAVEON:TRIGer is ON.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The file name you want to use. |
SAVEON:FILE:NAME "MaskFailure" SAVEON:FILE:NAME? might return ":SAVEON:FILE:NAME MaskFailure5"
:SAVEON:IMAGeset / query
Sets or queries whether to save a screen capture when a trigger occurs, when SAVEON:TRIGger is ON. The feature is disabled by 0 and enabled by any other value or by ON.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | Turns Save On Image off or on. |
| value | integer | 0 | Numeric value where 0 disables Save On Image and any other value turns it on. |
:SAVEON:IMAGe:FILEFormatset / query
Sets or queries the file format used for saved image files when :SAVEON:IMAGe is enabled. The file name should use the matching extension for the selected format.
| Name | Type | Values | Description |
|---|---|---|---|
| format | enum | PNG | BMP | JPG | Specifies the file format for saved image files. |
SAVEON:IMAGE:FILEFORMAT JPG SAVEON:IMAGE:FILEFORMAT? might return :SAVEON:IMAGE:FILEFORMAT PNG
:SAVEON:TRIGgerset / query
Sets or queries whether to save a file when a trigger occurs. The trigger can cause the instrument to save an image or waveform to a file, depending on the current Save On settings.
SAVEON:TRIGger
:SAVEON:WAVEformset / query
Sets or queries whether to save a waveform when a trigger occurs when SAVEON:TRIGger is ON. The waveform is saved to the file selected with SAVEON:FILE:NAME in the location selected with SAVEON:FILE:DEST.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables Save On Waveform. |
enum - Returns the Save On Waveform state.
:SAVEON:WAVEform:FILEFormatset / query
Sets or queries the file format used when saving waveforms with Save On Waveform enabled. Supported formats are internal instrument format and spreadsheet CSV format.
enum - Returns the current waveform save file format.
SAVEON:WAVEFORM:FILEFORMAT SPREADSheet SAVEON:WAVEFORM:FILEFORMAT?
:SAVEON:WAVEform:SOURceset / query
Sets or queries the sources used for saving waveforms when SAVEON:TRIGger is ON.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | MATH<x> | REF<x> | ALL | Specifies the waveform source to save. |
enum - Returns the selected save-on waveform source.
SAVEON:WAVEform:SOURce MATH1 SAVEON:WAVEform:SOURce? might return :SAVEON:WAVEFORM:SOURCE REF1 indicating the save on source is REF1.
:SEARCHTABle:ADDNewset / query
Adds a new search event table.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | The name of the search table; the argument prefix must be "TABLE" followed by a non-zero integer. |
SEARCHTABle:ADDNew "TABLE1" adds the TABLE1 in the display area.
:SEARCHTABle:DELeteset / query
Deletes a search event table.
| Name | Type | Values | Description |
|---|---|---|---|
| qstring | string | - | The name of the search table; "TABLE" should be the argument prefix followed by a non-zero integer. |
SEARCHTABle:DELete "TABLE1" removes the TABLE1 from the display area.
:SEARCHTABle:list?query
Queries all search event tables.
string - Returns the list of all search event tables.
:SECurity:LOGger:STATeset / query
Sets or queries the state of the security log. The security log records security activities to the securitylog.txt file; when OFF, it stops recording new activity but previously recorded activity remains present when exporting log files.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | Controls whether the security logger is disabled or enabled. |
enum - Returns the security logger state as 0 when disabled.
SECurity:LOGger:STATe ON SECurity:LOGger:STATe? might return :SECurity:LOGger:STATe 0, indicating the security logger is disabled.
Sets or queries the state of the security log. The security log records security activities to the securitylog.txt file; when OFF, it stops recording new activity but retains previous entries for export.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | OFF | ON | State of the security logger. |
enum - Returns the current security logger state; the example shows 0 when disabled.
SECurity:LOGger:STATe? might return :SECurity:LOGger:STATe 0, indicating the security logger is disabled.
:SELect:CH<x>set / query
Turns the display of channel <x> on or off and resets the acquisition. The query returns whether the channel is on or off, but does not indicate whether it is the specified waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Turns the display of the specified waveform on or off. |
enum - Returns whether the channel display is on or off.
SELECT:CH2 ON turns the channel 2 waveform display on, and selects channel 2.
:SELect:CH<x>?query
Turns the display of channel <x> waveform on or off and resets the acquisition. The query returns whether the channel is on or off, but does not indicate whether it is the specified waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Turns the display of the specified waveform on or off. |
enum - Returns whether the channel is on or off; it does not indicate whether it is the specified waveform.
SELECT:CH2 ON turns the channel 2 waveform display on, and selects channel 2.
:SET?query
Query-only command that returns the commands listing the instrument settings, excluding calibration configuration information. The returned commands can be sent back to the instrument to restore the state at the time of the query; it is identical to *LRN?.
string - Returns the command headers for the current instrument settings, regardless of the HEADer setting, formatted as a command string that can be sent back to the instrument.
SET? might return the following response:
:SOCKETServer:ENAbleset / query
Enables or disables the socket server used for telnet or other TCPIP socket connections to send commands and queries to the instrument. The default state is enabled.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | Enables or disables the socket server. |
Enables or disables the socket server used for telnet or other TCPIP socket connections to send commands and queries to the instrument. The default state is enabled.
enum - Returns the socket server state.
:SOCKETServer:PORTset / query
Sets the TCPIP port for the socket server connection. If the socket server is enabled and the specified port is already in use, error 221 is posted and the port remains unchanged.
| Name | Type | Values | Description |
|---|---|---|---|
| port | integer | - | TCPIP port for the socket server connection. |
SOCKETSERVER:PORT 4000 SOCKETSERVER:PORT?
:SOCKETServer:PORT?query
Sets or queries the TCPIP port for the socket server connection.
integer - Returns the current TCPIP port for the socket server connection.
:SOCKETServer:PROTOColset / query
Sets or queries the protocol for the socket server. Terminal protocol sends a session startup message and provides a command prompt; None disables terminal features for raw socket transactions. The default is None.
enum - Returns the current socket server protocol.
SOCKETSERVER:PROTOCOL NONE SOCKETSERVER:PROTOCOL?
Sets or queries the protocol for the socket server. Terminal protocol sends a session startup message and provides a command prompt; None disables terminal features for raw socket transactions.
| Name | Type | Values | Description |
|---|---|---|---|
| protocol | enum | TERMinal | NONe | Protocol used for the socket server. |
enum - Returns the current socket server protocol.
SOCKETSERVER:PROTOCOL NONE sets the protocol to none. SOCKETSERVER:PROTOCOL? might return :SOCKETSERVER:PROTOCOL TERMINAL indicating the protocol is set to terminal.
:SV:CH<x>:RF_AVErage:NUMAVgset / query
Sets or queries the number of acquisitions used when creating the Average trace for the specified Spectrum View spectrum trace channel. The average spectrum trace is computed from multiple acquisitions at each trace point.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
| NR1 | integer | 2 - 512 | Specifies the number of acquisitions to average. |
integer - Returns the number of acquisitions used for averaging.
SV:CH1:RF_AVErage:NUMAVg 100 sets the number of acquisitions to use for the Average spectrum trace of channel 1 to 128 (the closest power of 2 increment). SV:CH2:RF_AVErage:NUMAVg? might return 16, indicating that the number of averages for the channel 2 Average spectrum trace is set to 16.
Sets or queries the number of acquisitions used to create the Average trace for the specified Spectrum View spectrum trace channel. The average spectrum trace uses values from multiple acquisitions at each trace point.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
| <NR1> | integer | 2 - 512 | Specifies the number of acquisitions to average; the range is 2 to 512 in exponential increments. |
integer - Returns the number of acquisitions used for the Average spectrum trace for the specified channel.
SV:CH1:RF_AVErage:NUMAVg 100 sets the number of acquisitions to use for the Average spectrum trace of channel 1 to 128 (the closest power of 2 increment). SV:CH2:RF_AVErage:NUMAVg? might return 16, indicating that the number of averages for the channel 2 Average spectrum trace is set to 16.
:SV:CH<x>:RF_MAGnitude:FORMatset / query
Sets or queries the format of the Magnitude vs. Time trace for the specified channel. Requires option SV-RFVT.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | Spectrum trace channel source. |
| format | enum | AMPLINear | POWLINear | POWLOG | Format of the Magnitude vs. Time trace. |
Sets or queries the format of the Magnitude vs. Time trace for the specified channel.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Spectrum trace channel source. |
| format | enum | AMPLINear | POWLINear | POWLOG | Trace format. |
:SV:CH<x>:RF_PHASe:REFerence:DEGreesset / query
Sets or queries the channel Phase Reference value in degrees. The value is a fixed phase value at the phase time set by SV:CH<x>:RF_PHASe:REFerence:TIMe; if CH<x> is the master phase reference, it is used to calculate the phase values of all other channels.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | CH<x> is the channel number of the Phase vs. Time trace. |
| degrees | real | degrees | Phase Reference value in degrees. |
real (degrees) - Returns the Phase Reference value in degrees.
SV:CH1:RF_PHASe:REFerence:DEGrees 25 SV:CH2:RF_PHASe:REFerence:DEGrees?
Sets or queries the channel Phase Reference value in degrees. The value is fixed at the phase time set by `SV:CH<x>:RF_PHASe:REFerence:TIMe` and, for the master phase reference, is used to calculate the phase values of all other channels.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Channel number of the Phase vs. Time trace. |
| degrees | real | degrees | Phase Reference value. |
real (degrees) - Phase Reference value in degrees.
SV:CH1:RF_PHASe:REFerence:DEGrees 25 SV:CH2:RF_PHASe:REFerence:DEGrees?
:SV:CH<x>:RF_PHASe:REFerence:POSitionset / query
Sets or queries whether the channel Phase Reference is located at the Trigger position or at the Cursor A position.
enum - Returns whether the channel Phase Reference is located at the Trigger position or at the Cursor A position.
Sets or queries whether the channel Phase Reference is located at the Trigger position or at the Cursor A position.
:SV:CH<x>:RF_PHASe:REFerence:TIMeset / query
Sets or queries the channel Phase Reference time in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Channel number of the Phase vs. Time trace. |
| value | real | s | Phase Reference time in seconds. |
real (s) - Phase Reference time in seconds.
Sets or queries the channel Phase Reference time in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | s | Channel Phase Reference time. |
real (s) - Returns the channel Phase Reference time in seconds.
:SV:CH<x>:RF_PHASe:WRAP:DEGreesset / query
Sets or queries the Phase Wrap limit for the Phase vs. Time trace for the specified channel. When Phase Wrap is enabled, phase values are constrained to be within plus/minus the specified limit and wrapped by adding or subtracting 360 degrees as needed.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 180 - infinity | Number of wrap degrees. |
real (degrees) - Returns the current Phase Wrap limit for the specified channel.
SV:CH2:RF_PHASe:WRAP:DEGrees 200 SV:CH1:RF_PHASe:WRAP:DEGrees? might return 210
Sets or queries the Phase Wrap limit for the Phase vs. Time trace for the specified channel. When Phase Wrap is enabled, the phase values are constrained to be within ± the specified limit and values outside the limit are wrapped by adding or subtracting 360 degrees.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | 180 - infinity | Sets the number of wrap degrees. |
real (degrees) - Returns the Phase Wrap limit for the specified channel.
SV:CH2:RF_PHASe:WRAP:DEGrees 200 sets the Phase Wrap limit for the Channel 2 Phase vs. Time trace to 200 degrees. SV:CH1:RF_PHASe:WRAP:DEGrees? might return 210, indicating that the Phase Wrap limit for the Channel 1 Phase vs. Time trace is 210 degrees.
:SV:CH<x>:RF_PHASe:WRAP:STATEset / query
Sets or queries whether Phase Wrap is applied to the Phase vs. Time trace for the specified channel.
enum - Returns whether Phase Wrap is applied for the specified channel.
Sets or queries whether Phase Wrap is applied to the Phase vs. Time trace for the specified channel.
enum - Returns whether Phase Wrap is applied for the specified channel.
:SV:CH<x>:SELect:RF_AVErageset / query
Sets or queries whether the Average trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | Specifies the spectrum trace channel source. |
| state | enum | ON | 1 | OFF | 0 | Enables or disables the display of the Average trace for the specified spectrum trace channel. |
SV:CH3:SELect:RF_AVErage ON SV:CH1:SELect:RF_AVErage?
Sets or queries whether the Average trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
| state | enum | ON | 1 | OFF | 0 | Enables or disables display of the Average trace for the specified spectrum trace channel. |
enum - Returns the state of the Average trace display for the specified spectrum trace channel.
SV:CH3:SELect:RF_AVErage ON turns on the display of the Average trace for the channel 3 spectrum trace. SV:CH1:SELect:RF_AVErage? might return 0, indicating that the Average trace for the channel 1 spectrum trace is turned off.
:SV:CH<x>:SELect:RF_FREQuencyset / query
Sets or queries whether the Frequency vs. Time trace for the specified channel is displayed in the Waveform View. Requires option SV-RFVT.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | The channel number of the Frequency vs. Time trace. |
| state | enum | ON | OFF | Enables or disables display of the Frequency vs. Time trace for the specified channel. |
Sets or queries whether the Frequency vs. Time trace for the specified channel is displayed in the Waveform View. Requires option SV-RFVT.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | - | - | Channel number of the Phase vs. Time trace. |
:SV:CH<x>:SELect:RF_MAGnitudeset / query
Sets or queries whether the Magnitude vs. Time trace for the specified channel is displayed in the Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number of the Magnitude vs. Time trace. |
| state | enum | ON | OFF | Enables or disables display of the Magnitude vs. Time trace. |
enum - Returns the display state of the Magnitude vs. Time trace.
SV:CH4:SELect:RF_MAGnitude ON turns on (enables) display of the Channel 4 Magnitude vs. Time trace. SV:CH1:SELect:RF_MAGnitude? might return OFF, indicating that the Channel 1 Magnitude vs. Time trace is not displayed.
Sets or queries whether the Magnitude vs. Time trace for the specified channel is displayed in the Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Channel number of the Magnitude vs. Time trace. |
| state | enum | ON | OFF | Enables or disables display of the Magnitude vs. Time trace. |
enum - Indicates whether the Channel x Magnitude vs. Time trace is displayed.
SV:CH4:SELect:RF_MAGnitude ON turns on (enables) display of the Channel 4 Magnitude vs. Time trace. SV:CH1:SELect:RF_MAGnitude? might return OFF, indicating that the Channel 1 Magnitude vs. Time trace is not displayed.
:SV:CH<x>:SELect:RF_MAXHoldset / query
Sets or queries whether the Max Hold trace is displayed for the specified spectrum trace channel in the Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | x - x | Channel number of the Spectrum View trace. |
| state | enum | ON | 1 | OFF | 0 | Enables or disables display of the Max Hold trace. |
enum - Returns whether the Max Hold trace is displayed for the specified channel.
Sets or queries whether the Max Hold trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | The channel number of the spectrum trace channel. |
enum - Returns whether the Max Hold trace is displayed.
:SV:CH<x>:SELect:RF_MINHoldset / query
Sets or queries whether the Min Hold trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
| state | enum | ON | 1 | OFF | 0 | Enables or disables display of the Min Hold trace for the specified spectrum trace channel. |
SV:CH2:SELect:RF_MINHold ON SV:CH1:SELect:RF_MINHold? might return 0, indicating that the Min Hold trace for the channel 1 spectrum trace is turned off.
Sets or queries whether the Min Hold trace is displayed for the specified spectrum trace channel in Spectrum View.
enum - Returns whether the Min Hold trace for the specified spectrum trace channel is displayed.
SV:CH2:SELect:RF_MINHold ON SV:CH1:SELect:RF_MINHold?
:SV:CH<x>:SELect:RF_NORMalset / query
Sets or queries whether the Normal trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
Sets or queries whether the Normal trace is displayed for the specified spectrum trace channel in Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | - | - | Specifies the spectrum trace channel source. |
:SV:CH<x>:SELect:RF_PHASeset / query
Sets or queries whether the Phase vs. Time trace for the specified channel is displayed in the Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number of the Phase vs. Time trace. |
| state | enum | ON | OFF | Enables or disables display of the Phase vs. Time trace. |
enum - Returns the current display state of the Phase vs. Time trace for the specified channel.
SV:CH4:SELect:RF_PHASe ON SV:CH1:SELect:RF_PHASe?
Sets or queries whether the Phase vs. Time trace for the specified channel is displayed in the Waveform View.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | integer | - | Specifies the channel number of the Phase vs. Time trace. |
| state | enum | ON | OFF | Enables or disables display of the Phase vs. Time trace. |
enum - Returns the current display state for the specified channel's Phase vs. Time trace.
SV:CH4:SELect:RF_PHASe ON SV:CH1:SELect:RF_PHASe? might return SV:CH1:SELect:RF_PHASe OFF, indicating that the Channel 1 Phase versus Time trace is not displayed.
:SV:CH<x>:SELect:SPECtrogramset / query
Sets or queries whether the spectrogram plot for the specified channel is displayed in the Spectrum View. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Spectrum View channel number. |
Sets or queries whether the spectrogram plot for the specified channel is displayed in Spectrum View. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Channel number for the spectrogram plot. |
:SV:CH<x>:SELTraceset / query
Sets or queries the spectrum trace type shown for the specified channel in Spectrum View. Each channel can display a Normal, Max Hold, Min Hold, or Average trace.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | 1 - 4 | Analog channel number to use as the Spectrum View source. |
| trace | enum | NORMal | MAXHold | MINHold | AVErage | Selects which spectrum trace type to show for the specified channel. |
enum - Returns the currently selected spectrum trace type for the specified channel.
SV:CH1:SELTrace MAXhold SV:CH1:SELTrace?
:SV:CH<x>:SELTrace?query
Sets or queries the spectrum trace type to show for the specified channel in Spectrum View. Each channel’s spectrum trace can display Normal, Max Hold, Min Hold, or Average.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Specifies the analog channel to use as the Spectrum View source. |
| mode | enum | NORMal | MAXHold | MINHold | AVErage | Selects the trace type for the specified spectrum trace channel. |
enum - Returns the currently selected spectrum trace type for the specified channel.
SV:CH1:SELTrace MAXhold SV:CH1:SELTrace?
:SV:CH<x>:SQUELCH:STATEset / query
Sets or queries whether Squelch is enabled for the RF versus Time traces for the specified channel. When enabled, the Frequency and Phase versus Time traces are shown only when the Magnitude versus Time trace is above the threshold.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number of the Frequency or Phase versus Time trace. |
| state | enum | ON | OFF | Enables or disables Squelch calculations. |
SV:CH6:SQUELCH:STATE ON SV:CH1:SQUELCH:STATE? might return SV:CH1:SQUELCH:STATE OFF
:SV:CH<x>:SQUELCH:THResholdset / query
Sets or queries the Squelch threshold value for the RF versus Time traces for the specified channel. The threshold is applied, in volts, to the Magnitude versus Time trace to determine whether the Frequency and Phase versus Time traces are shown.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Channel number of the Magnitude versus Time trace. |
| threshold | real | V | Threshold value applied to the Magnitude versus Time trace. |
:SV:CH<x>:UNItsset / query
Sets or queries the absolute logarithmic amplitude vertical scale units for the specified Spectrum View trace channel.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Analog channel to use as the Spectrum View source. |
| units | enum | DBM | DBUW | DBMV | DBUV | DBMA | DBUA | Vertical scale units for the spectrum trace. |
enum - Returns the current vertical units for the specified channel.
SV:CH5:UNIts DBUV sets the units to be used for the channel 5spectrum trace to decibel microvolts. SV:CH1:UNIts? might return DBM, indicating that the vertical units for the channel 1 spectrum trace are decibel milliwatts.
:SV:LOCKCenterset / query
Sets or queries whether the Center Frequency setting is locked across all channels in the Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Enables or disables locking of the Center Frequency setting across all Spectrum View channels. |
enum - Returns whether the Center Frequency setting is locked across all channels in the Spectrum View.
:SV:LOCKSpectrumset / query
Sets or queries whether the Spectrum Time value is locked across all spectrum trace channels in the Spectrum View.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Selects whether all spectrum trace channels use the same Spectrum Time value or independent values. |
SV:LOCKSpectrum ON sets all spectrum trace channels to use the same spectrum time. SV:LOCKSpectrum? might return 0, which indicates each channel may have an independent Spectrum Time setting.
:SV:MARKER:PEAK:EXCURsionset / query
Sets or queries the minimum peak excursion value, in dB, for the Spectrum View trace peak markers.
| Name | Type | Values | Description |
|---|---|---|---|
| excursion | real | dB | Minimum peak excursion value for the peak markers. |
:SV:MARKER:PEAK:MAXimumset / query
Sets or queries the maximum number of Spectrum View peak markers that can be placed on spectrum traces. The allowed range is 1 to 11, and the default is 5.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 11 | Maximum number of peak markers to display on spectrum traces. |
SV:MARKER:PEAK:MAXimum 3 SV:MARKER:PEAK:MAXimum?
Queries the peak amplitudes for the Spectrum View trace peak markers.
real - Returns the peak amplitudes for the Spectrum View trace peak markers.
:SV:MARKER:PEAK:STATEset / query
Sets or queries whether peak markers are shown on spectrum traces in the Spectrum View window. Up to 11 markers are supported, and the markers find amplitude peaks based on threshold and excursion settings.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | 1 | OFF | 0 | Turns peak markers on or off. |
SV:MARKER:PEAK:STATE {ON|1|OFF|0}
SV:MARKER:PEAK:STATE?Queries the peak frequencies for the Spectrum View trace peak markers.
string - Returns the peak frequencies in a comma separated list.
SV:MARKER:PEAKS:FREQuency? might return "781.2605289757411E+6,906.0288915094338E+6,946.8286725067385E+6,1.02605"
:SV:MARKER:PEAK:THResholdset / query
Sets or queries the minimum peak threshold value required to mark a peak. Only peaks with an amplitude greater than the threshold value qualify for peak marker placement, and the setting applies to all spectrum traces in their own vertical units.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | -200.0 - 200.0 | Peak marker threshold value. |
real (dBm) - Returns the peak marker threshold value.
SV:MARKER:PEAK:THReshold -40 SV:MARKER:PEAK:THReshold?
:SV:MARKER:REFERenceset / query
Sets the center frequency of the currently selected Spectrum View channel to the frequency indicated by the Reference Marker, moving the Reference Marker to the center of the screen.
Queries the amplitude (vertical) value of the Reference Marker in user-set units. This value indicates the absolute amplitude of the Reference Marker, regardless of whether the other markers are manual or automatic.
real - <NR3> specifies the amplitude of the Reference Marker.
SV:MARKER:REFERence:AMPLITUDE? might return -65.6218, indicating an amplitude value of -65.6218 dBm.
Queries the frequency of the Reference Marker in Hz when the Spectrum View trace markers are on.
real (Hz) - The frequency of the Reference Marker.
SV:MARKER:REFERence:FREQuency? might return 1.6830E+9, indicating that the Reference Marker frequency is 1.683 GHz.
:SV:MARKER:TYPeset / query
Sets or queries the peak marker type. An Absolute marker shows the frequency and amplitude at the marker location, while a Delta marker shows them relative to the Reference Marker.
:SV:RBWset / query
Sets or queries the resolution bandwidth (RBW) when RBW mode is MANUAL. RBW is the width of the narrowest measurable band of frequencies in a Spectrum View trace.
| Name | Type | Values | Description |
|---|---|---|---|
| rbw | real | Hz | Specifies the width of the narrowest measurable band of frequencies in a Spectrum View trace. |
real (Hz) - Returns the current RBW setting.
SV:RBW 2.0E+04 sets the RBW to 20 kHz. SV:RBW? might return 3.0E+6, indicating that the RBW has been set to 3 MHz.
:SV:RBWModeset / query
Sets or queries the Spectrum View resolution bandwidth (RBW) mode. The mode can be Automatic or Manual.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTOmatic | MANual | Selects the RBW mode. |
:SV:RF_PHASe:REFerence:MASTerset / query
Sets or queries the channel used as the Master Phase Reference in Spectrum View. CH<x> selects a channel as the reference source, and NONE indicates that no Master Phase Reference is used.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | NONE | Master Phase Reference source to use. |
enum - Returns the current Master Phase Reference source.
SV:RF_PHASe:REFerence:MASTer CH3 sets the Master Phase Reference source to Channel 3. SV:RF_PHASe:REFerence:MASTer? might return SV:RF_PHASe:REFerence:MASTer NONE, indicating that there is no Master Phase Reference.
:SV:SPANset / query
Sets or queries the span setting for all channels in Spectrum View. The span is the frequency range centered on the center frequency, from center frequency minus half the span to center frequency plus half the span.
| Name | Type | Values | Description |
|---|---|---|---|
| NR3 | real | - | Span value. |
real - Returns the current span setting for all channels in Spectrum View.
:SV:SPANRBWRatioset / query
Sets or queries the ratio of the span to the resolution bandwidth (RBW) used when RBW Mode is set to AUTO. The default RBW ratio is 1000:1.
| Name | Type | Values | Description |
|---|---|---|---|
| ratio | real | - | The span-to-RBW ratio. |
real - The current span-to-RBW ratio.
SV:SPANRBWRatio 1000 sets the RBW to one one-thousandth of the span. SV:SPANRBWRatio? might return 1.00E+3, which means the RBW has been set to one one-thousandth of the span.
:SV:SPECtrogram:CSCale:MAXset / query
Sets or queries the maximum color scale value for the spectrogram. Maximum must be greater than Minimum; if Maximum is adjusted down to equal Minimum, Minimum is decremented as needed to stay 1 dB below Maximum.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | dB | Maximum color scale value. |
:SV:SPECtrogram:CSCale:MINset / query
Sets or queries the minimum color scale value for the spectrogram. Minimum must be less than maximum; if adjusted up to the current maximum, the maximum increments as needed to stay 1 dB above minimum.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | -170.0 - 99.0 | Sets the minimum color scale value. |
SV:SPECtrogram:CSCale:MAX -100.0 sets the color scale min value to -100.0. SV:SPECtrogram:CSCale:MAX? might return SV:SPECtrogram:CSCale:MAX -100.0, indicating that the color scale min value is -100.0.
:SV:SPECtrogram:CURSor:Aset / query
Sets or queries whether the spectrum trace at cursor A position is selected.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | ON | OFF | Selects or deselects the spectrum trace at cursor A position. |
enum - Returns whether the spectrum trace at cursor A position is selected.
:SV:SPECtrogram:CURSor:Bset / query
Sets or queries whether the spectrum trace at cursor B position is selected or not.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 1 | 0 | ON | OFF | Turns on or off the spectrum trace for cursor B position. |
enum - Returns whether the spectrum trace at cursor B position is selected or not.
SV:SPECtrogram:CURSor:B ON SV:SPECtrogram:CURSor:B?
:SV:WINDOWset / query
Sets or queries the window type used by the Spectrum View windowing function. The default window type is Blackman-Harris.
:TIMeset / query
Sets the time in the form hh:mm:ss. The manual notes that hh is a two-digit hour, mm is a two-digit minute from 01 to 60, and ss is a two-digit second from 01 to 60.
| Name | Type | Values | Description |
|---|---|---|---|
| time | string | - | Time value in hh:mm:ss format. |
:TIMe:ZONeset / query
Sets the time zone to the specified quoted string. A query form returns the current time zone string.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string representing the desired time zone. |
string - Returns the current time zone as a quoted string.
TIME:ZONE "America/Yellowknife" sets the time zone to UTC delta -7. TIME:ZONE? might return TIME:ZONE "America/Los_Angeles".
:TIMe:ZONe:UTCDELTaset / query
Sets or queries the time zone using the difference between the desired time zone and UTC (GMT). Supported deltas range from -12.00 to 5.0 hours, including half-hour offsets.
| Name | Type | Values | Description |
|---|---|---|---|
| utc delta | real | -12.00 - 5.0 | Number of hours difference between the desired time zone and UTC. |
real (h) - Returns the time zone UTC delta in hours.
TIME:ZONE:UTCDELTA -7.0e0 sets the time zone to America/Yellowknife.
:TOTaluptime?query
Returns the total number of hours the instrument has been turned on since the NV memory was last programmed.
real - The total number of hours the instrument has been turned on since the NV memory was last programmed.
TOTaluptime? TOTALUPTIME? might return TOTALUPTIME 756 indicating the up time is 756 minutes.
:TOUCHSCReen:CALibrateset / query
Launches the touch screen calibration procedure. It is equivalent to tapping the Calibrate touch screen control in the Utility->Self Test menu.
| Name | Type | Values | Description |
|---|---|---|---|
| start | enum | STARt | Launches the touch screen calibration procedure. |
TOUCHSCREEN:CALIBRATE START launches the touch screen calibration procedure.
:TOUCHSCReen:STATeset / query
Sets or queries the enabled state of the touch screen only. This command is equivalent to pushing the Touch Off button on the front panel.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | 0 | 1 | OFF | ON | Enabled state of the touch screen. |
enum - Returns the current enabled state of the touch screen.
:TRIGgerset / query
Forces a trigger event to occur. The query returns the current trigger parameters for the instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | FORCe | Creates a trigger event. |
string - Returns the current trigger parameters for the instrument.
TRIGGER FORCE forces a trigger event to occur. TRIGGER? returns the current trigger parameters for the instrument.
:TRIGger:{A|B|B:RESET}set / query
Sets the A, B, or B Reset trigger level automatically to 50% of the range between the minimum and maximum trigger input signal values. The query returns the current trigger parameters.
| Name | Type | Values | Description |
|---|---|---|---|
| SETLevel | enum | - | Sets the trigger level to 50% of the range of the minimum and maximum values of the trigger input signal. |
returns
TRIGger:A SETLEVEL sets the trigger level to 50% of the range of the minimum and maximum values of the trigger input signal. TRIGger:A? returns current trigger parameters.
:TRIGger:{A|B}:BUS:B<x>:ARINC429A:CONDitionset / query
Specifies what field or condition an ARINC429 bus trigger should respond to. The bus number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOW | LABel | DATa | LABELANDDATA | EOW | ERRor | Selects the ARINC429 trigger condition. |
TRIGger:{A|B}:BUS:B<x>:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA |EOW|ERRor}
TRIGger:{A|B}:BUS:B<x>:ARINC429A:CONDition?Sets or queries the high value used when triggering on an ARINC429 data field. The trigger condition must be set to DATA or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Label value to use as the high value. |
string - Returns the current label value.
TRIGGER:A:BUS:B1:ARINC429A:DATA:HIVALUE "XXXXXXXXXXXXXXX1000" TRIGGER:A:BUS:B1:ARINC429A:DATA:HIVALUE?
Sets or queries the qualifier used when triggering on data in the ARINC429 DATA field. The trigger condition must be DATa or LABELANDDATA, and the qualifier applies only to the bits defined by the bus data field format.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for triggering on the ARINC429 data field. |
TRIGger:A:BUS:B1:ARINC429A:DATA:QUALifier EQual TRIGger:A:BUS:B1:ARINC429A:DATA:QUALifier?
:TRIGger:{A|B}:BUS:B<x>:ARINC429A:DATa:VALueset / query
Sets or queries the low value when triggering on an ARINC429 data field. The bus number is specified by x, and the trigger condition must be set to DATA or LABELANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Label value. |
string - Returns the label value.
TRIGGER:A:BUS:B1:ARINC429A:DATA:VALUE "XXXXXXXXXXXXXXX1000" sets the value to XXXXXXXXXXXXXXX1000. TRIGGER:A:BUS:B1:ARINC429A:DATA:VALUE? might return "XXXXXXXXXXXXXXXXXXX", indicating that the value is XXXXXXXXXXXXXXXXXXX.
:TRIGger:{A|B}:BUS:B<x>:ARINC429A:ERRTYPeset / query
Sets or queries the error type when triggering on an ARINC429 bus signal. The bus number is specified by x, and the trigger condition must be set to ERROR.
Sets or queries the high value used when triggering on an ARINC429 label field. The trigger condition must be set to LABel, and the label qualifier must be INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| label value | string | - | The label value. |
string - Returns the current label high value.
TRIGGER:A:BUS:B1:ARINC429A:LABEL:HIVALUE "XXXX1010" TRIGGER:A:BUS:B1:ARINC429A:LABEL:HIVALUE?
Sets or queries the qualifier used when triggering on ARINC429 label data. The trigger condition must be set to LABel or LABELANDDATA; if set to LABELANDDATA, the label qualifier is locked to Equal until the trigger condition changes.
Sets or queries the low value used when triggering on an ARINC429 label field. The bus number is specified by x, and the trigger condition must be set to LABEL or LABELANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The label value. |
string - Returns the current label value as a quoted string.
TRIGGER:A:BUS:B1:ARINC429A:LABEL:VALUE "XXXX1010" sets the value to XXXX1010. TRIGGER:A:BUS:B1:ARINC429A:LABEL:VALUE? might return "XXXXXXXX", indicating that the value is XXXXXXXX.
:TRIGger:{A|B}:BUS:B<x>:ARINC429A:SDI:VALueset / query
Sets or queries the label when triggering on an ARINC429 SDI field. The bus number is specified by x, and the trigger condition must be DATa or LABELANDDATA with the data format set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Label value. |
string - Returns the current label value.
TRIGGER:A:BUS:B1:ARINC429A:SDI:VALUE "X0" TRIGGER:A:BUS:B1:ARINC429A:SDI:VALUE? might return "XX"
:TRIGger:{A|B}:BUS:B<x>:ARINC429A:SSM:VALueset / query
Sets or queries the label value when triggering on an ARINC429 SSM field. The bus number is specified by x, and the trigger condition must be DATa or LABELANDDATA with the data format set to DATA or SDIDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Label value. |
string - Returns the current label value.
TRIGGER:A:BUS:B1:ARINC429A:SSM:VALUE "X0" sets the value to X0. TRIGGER:A:BUS:B1:ARINC429A:SSM:VALUE? might return "XX", indicating that the value is XX.
:TRIGger:{A|B}:BUS:B<x>:AUDio:CONDitionset / query
Sets the condition used when triggering on an audio bus signal. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | DATa | Selects whether triggering is on word select/start of frame or matching data. |
TRIGger:A:BUS:B1:AUDio:CONDition SOF TRIGger:A:BUS:B1:AUDio:CONDition? might return TRIGGER:A:BUS:B1:AUDIO:CONDITION DATA indicating the condition is data.
Sets or queries the binary data string for the high data word used when triggering on a TDM audio bus signal. The trigger condition must be set to DATa using the corresponding audio condition command.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string for the high data word used when triggering on a TDM audio bus signal. |
string - Returns the high data word binary data string; the example shows the stored string in the response.
TRIGger:A:BUS:B1:AUDio:DATa:HITDMVALue "1100" sets the high value to 1100. TRIGger:A:BUS:B1:AUDio:DATa:HITDMVALue? might return TRIGGER:A:BUS:B1:AUDIO:DATA:HITDMVALUE "XXXXXXXXXXXXXXXXXXXX1010" indicating the high value is 1010.
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:HIVALueset / query
Sets the upper word value used when triggering on an audio bus signal. The trigger condition must be set to DATA with TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Upper word value to be used when triggering on an audio bus signal. |
TRIGger:A:BUS:B1:AUDio:DATa:HIVALue "11001101" TRIGger:A:BUS:B1:AUDio:DATa:HIVALue?
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:OFFSetset / query
Sets the data offset value to be used when triggering on an audio bus signal. The trigger condition must be set to DATA using TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | - | The data offset value. |
TRIGger:A:BUS:B1:AUDio:DATa:OFFSet 2 TRIGger:A:BUS:B1:AUDio:DATa:OFFSet?
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:QUALifierset / query
Sets the qualifier used when triggering on an audio bus signal. The trigger condition must first be set to DATa with TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | INrange | OUTrange | Selects the comparison qualifier for the audio bus trigger condition. |
TRIGger:A:BUS:B1:AUDio:DATa:QUALifier LESSTHAN sets the qualifier to less than. TRIGger:A:BUS:B1:AUDio:QUALifier? might return TRIGGER:A:BUS:B1:AUDIO:DATA:QUALIFIER EQUAL indicating the qualifies is set to equal.
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:TDMVALueset / query
Sets the TDM value for audio bus triggering on bus B<x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Bus number in the audio trigger path. |
TRIGger:A:BUS:B1:AUDio:DATa:TDMVALue "1100" sets the TDMVALUE to 1100. TRIGger:A:BUS:B1:AUDio:DATa:TDMVALue? might return TRIGGER:A:BUS:B1:AUDIO:DATA:TDMVALUE
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:VALueset / query
Sets the lower word value used when triggering on an audio bus signal. The trigger condition must be set to DATa, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | <QString> specifies the trigger data lower word. |
string - Returns the current lower word value for the audio bus trigger data.
TRIGger:A:BUS:B1:AUDio:DATa:VALue "11001101" sets the hi value to XXXXXXXXXXXXXXXX11001101. TRIGger:A:BUS:B1:AUDio:DATa:VALue? might return TRIGGER:A:BUS:B1:AUDIO:DATA:VALue "XXXXXXXXXXXXXXXXXXXXXXXX" indicating the data value is set to XXXXXXXXXXXXXXXXXXXXXXXX.
:TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:WORDset / query
Sets the alignment of the audio bus trigger data to left, right, or either. The trigger condition must be set to DATA using TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EITher | LEFt | RIGht | Aligns the trigger data to either left, left, or right. |
Specifies the condition for an Auto Ethernet bus trigger when speed is selected as 10 Base-T1S. Requires option SR-AUTOEN1.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | SOSD | PREamble | BEACon | ESD | ESDOK | ERRors | Condition for the Auto Ethernet trigger. |
This command specifies the error type for an Auto Ethernet bus to trigger on when speed is selected as 10 Base-T1S. The bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:CAN:CONDitionset / query
Sets the CAN trigger condition used when triggering on a CAN bus signal. The bus number is specified by x; supported conditions include start of frame, frame type, identifier, data, identifier+data, EOF, error, and FD bits.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SOF | FRAMEtype | IDentifier | DATa | IDANDDATA | EOF | ERRor | FDBITS | Selects the CAN trigger condition. |
TRIGGER:A:BUS:B1:CAN:CONDITION? might return TRIGGER:A:BUS:B1:CAN:CONDITION EOF indicating an end of file condition. TRIGGER:A:BUS:B1:CAN:CONDITION DATA enables triggering on matching CAN data.
:TRIGger:{A|B}:BUS:B<x>:CAN:DATa:DIRectionset / query
Sets the data direction to be used when searching on a CAN bus signal. The trigger condition must be set to Identifier first.
:TRIGger:{A|B}:BUS:B<x>:CAN:DATa:OFFSetset / query
Sets or queries the data offset value, in bytes, to use when triggering on the CAN data field. The bus number is specified by x, and the trigger condition must be set to DATA or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 - 7 | Data offset value in bytes to use when triggering on the CAN data field. |
integer - Returns the current data offset value in bytes.
:TRIGger:{A|B}:BUS:B<x>:CAN:DATa:QUALifierset / query
Sets the CAN data qualifier used when triggering on a CAN bus signal. The trigger condition must be IDANDDATA or DATa, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | Sets the comparison used for the CAN data qualifier. |
enum - Returns the current CAN data qualifier setting.
TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER LESSTHAN TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER?
:TRIGger:{A|B}:BUS:B<x>:CAN:DATa:SIZeset / query
Sets the length of the CAN data string, in bytes, used when triggering on a CAN bus signal. The trigger condition must be IDANDDATA or DATa, and the bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:CAN:DATa:VALueset / query
Sets the binary data value used when triggering on a CAN bus signal. The trigger condition must be set to IDANDDATA or DATa, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data value in QString format; only 0, 1, and X characters are allowed. |
TRIGGER:A:BUS:B1:CAN:DATA:VALUE "1011" TRIGGER:A:BUS:B1:CAN:DATA:VALUE?
:TRIGger:{A|B}:BUS:B<x>:CAN:ERRTypeset / query
Sets or queries the type of CAN error condition used for triggering on a bus signal. The trigger condition must be set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ACKMISS | BITSTUFFing | FORMERRor | ANYERRor | Type of CAN error condition to trigger on. |
:TRIGger:{A|B}:BUS:B<x>:CAN:FD:BRSBitset / query
Sets or queries the value of the CAN FD bit rate switch bit (BRS bit) used for triggering on bus B<x>. The trigger condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Selects whether to filter CAN FD packets by the BRS bit value. |
TRIGGER:A:BUS:B1:CAN:FD:BRSBit ONE TRIGGER:A:BUS:B1:CAN:FD:BRSBIT?
:TRIGger:{A|B}:BUS:B<x>:CAN:FD:ESIBitset / query
Sets the CAN FD ESI-bit filter for triggering on a CAN bus signal. It can filter for ESI bit value 1, value 0, or disable ESI-bit filtering.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects the CAN FD packets to match based on the ESI bit value. |
TRIGGER:A:BUS:B1:CAN:FD:ESIBit ONE TRIGGER:A:BUS:B1:CAN:FD:ESIBIT?
:TRIGger:{A|B}:BUS:B<x>:CAN:FRAMEtypeset / query
Sets the frame type to be used when triggering on a CAN bus signal. The trigger condition must be set to FRAMEtype.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | DATa | REMote | ERRor | OVERLoad | Selects the CAN trigger frame type. |
TRIGGER:A:BUS:B1:CAN:FRAMETYPE DATA sets the CAN trigger frame type to DATA. TRIGGER:A:BUS:B1:CAN:FRAMETYPE? might return TRIGGER:A:BUS:B1:CAN:FRAMETYPE DATA indicating the frame type is data.
:TRIGger:{A|B}:BUS:B<x>:CAN:IDentifier:MODeset / query
Sets the addressing mode (standard or extended format) to be used when triggering on a CAN bus signal. The trigger condition must be set to IDANDDATA or DATa.
:TRIGger:{A|B}:BUS:B<x>:CAN:IDentifier:VALueset / query
Sets the binary address value used when triggering on a CAN bus signal. The trigger condition must be IDANDDATA or DATa, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Up to 29-bit binary identifier value; only 0, 1, and X characters are allowed. |
TRIGGER:A:BUS:B1:CAN:IDENTIFIER:VALUE "1011" TRIGGER:A:BUS:B1:CAN:IDENTIFIER:VALUE?
:TRIGger:{A|B}:BUS:B<x>:ETHERnet:CONDitionset / query
This command specifies a field or condition within an Ethernet frame to trigger on. The bus number is specified by x.
When the Ethernet trigger condition is set to DATa and the qualifier is INrange or OUTrange, this command specifies the upper data value of the range. The default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Upper data value of the range. |
TRIGger:A:BUS:B1:ETHERnet:CONDition MACADDRess TRIGger:A:BUS:B1:ETHERnet:CONDition? might return DATA.
:TRIGger:{A|B}:BUS:B<x>:ETHERnet:DATa:OFFSetset / query
Specifies where in the Ethernet data field to look for the data trigger value. The value is an offset in bytes; the default is -1, meaning "don't care".
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 - 1499 | Offset into the data field, in bytes, where the trigger value will be matched. |
TRIGger:A:BUS:B1:ETHERnet:DATa:OFFSet 36 TRIGger:A:BUS:B1:ETHERnet:DATa:OFFSet?
Sets or queries the qualifier used when triggering on an Ethernet bus signal. The trigger condition must be set to DATa; the bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:ETHERnet:DATa:SIZeset / query
Specifies the number of contiguous TCP/IPv4/MAC client data bytes to trigger on when the Ethernet trigger condition is set to DATa. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 - 16 | Number of contiguous TCP/IPv4/MAC client data bytes. |
TRIGger:A:BUS:B1:ETHERnet:DATa:SIZe 4 TRIGger:A:BUS:B1:ETHERnet:DATa:SIZe? might return 6, indicating that the instrument is set to trigger on 6 contiguous data bytes.
:TRIGger:{A|B}:BUS:B<x>:ETHERnet:DATa:VALueset / query
Sets or queries the Ethernet trigger data value for bus B<x>. When the trigger condition is DATa, it specifies the value to trigger on, or the lower limit when the qualifier is INrange or OUTrange. The default is all X’s (don’t care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of 0, 1, and X characters used as the data pattern or range limit. |
string - Returns the current data value string.
TRIGger:A:BUS:B1:ETHERnet:DATa:VALue "00001000" TRIGger:A:BUS:B1:ETHERnet:DATa:VALue "00001000"
Specifies the 32-bit Ethernet IP destination address value used in the trigger when the Ethernet trigger condition is set to IPHeader. The address is entered as a standard IP address, and the default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string value for the IP destination address used in the trigger. |
Specifies the 8-bit protocol field value used in the Ethernet IP Header trigger condition. The default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 32 characters using 0, 1, and X; specified bits replace the least significant bits. |
TRIGger:A:BUS:B1:ETHERnet:IPHeader:PROTOCOL:VALue "00011001001000010110100000000001" sets the value to be used in the trigger to 01010010. TRIGger:A:BUS:B1:ETHERnet:IPHeader:PROTOCOL:VALue might return "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX01".
Specifies the 32-bit Ethernet IP source address value used in the trigger when the Ethernet trigger condition is set to IPHeader. The value is entered as a quoted string of 0, 1, and X characters; the default is all Xs (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string value for the source address bits; up to 32 characters using 0, 1, and X. |
string - Returns the current IP source address value as a quoted string of 0, 1, and X characters.
TRIGger:A:BUS:B1:ETHERnet:IPHeader:SOUrceaddr:VALue "00011001001000010110100000000001" TRIGger:A:BUS:B1:ETHERnet:IPHeader:SOUrceaddr:VALue might return "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX01"
When the Ethernet trigger condition is set to MACADDress, this command specifies the 48-bit MAC destination address used in the trigger along with the source address value. The default is all X's (don't care); the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string value that supplies the destination MAC address bits to use for triggering. |
Specifies the 48-bit Ethernet MAC source address value used in the trigger when the Ethernet trigger condition is set to MACADDress. The default is all X's (don't care), and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 48 characters containing 0, 1, and X; specified bits replace the least significant bits. |
TRIGger:A:BUS:B1:ETHERnet:MAC:ADDRess:SOUrce:VALue "XXXXXXXXXX01010111111100000001111010101010101000" would set the MAC destination address to trigger on to XX:35:FC:07:AA:C8 hex. TRIGger:A:BUS:B1:ETHERnet:MAC:ADDRess:SOUrce:VALue? might return "XXXXXXXXXX01010111111100000001111010101010101000".
Sets the upper data value of the Ethernet MACLENgth trigger range when the qualifier is INrange or OUTrange. The default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 16 characters containing 0, 1, and X; unspecified upper bits remain unchanged. |
string - Returns the current quoted string value for the upper data value.
TRIGger:A:BUS:B1:ETHERnet:MAC:LENgth:HIVALue "XXXXXXXX00001000" TRIGGER:A:BUS:B1:ETHERNET:MAC:LENGTH:HIVALUE?
When the Ethernet trigger condition is set to MACLENgth, this command specifies the 16-bit lower limit of the range or the value to trigger on, depending on the qualifier. The default is all X's (don't care).
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 16 characters using 0, 1, and X; the bits in the string replace the least significant bits. |
TRIGger:A:BUS:B1:ETHERnet:MAC:LENgth:VALue "XXXXXXXX00001000"
:TRIGger:{A|B}:BUS:B<x>:ETHERnet:QTAG:VALueset / query
When the Ethernet trigger condition is set to QTAG, this command specifies the 32-bit Q-Tag value to trigger on. The default is all X’s (don’t care); the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string of up to 32 characters; allowable characters are 0, 1, and X. |
returns
TRIGGER:A:BUS:B1:ETHERNET:QTAG:VALUE "XXXXXXXXXXXXXXXXXXXX010010001010" would specify to trigger TRIGGER:A:BUS:B1:ETHERNET:QTAG:VALUE? might return "XXXXXXXXXXXXXXXXXXXX010010001010".
When the Ethernet trigger condition is set to TCPHeader, this command specifies the 32-bit acknowledgement number used in the trigger. The default is all X’s (don’t care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | 32-bit acknowledgement number pattern, entered as a quoted string of 0, 1, and X characters. |
Specifies the 16-bit destination port address value used in the Ethernet TCPHeader trigger condition. The default is all Xs (don't care), and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted bit string used to set the destination port address; allowable characters are 0, 1, and X. |
Specifies the 32-bit TCP sequence number used in the Ethernet trigger when the trigger condition is set to TCPHeader. The default is all X's (don't care), and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted bit string value up to 32 characters long, using 0, 1, and X; the specified bits replace the least significant bits. |
TRIGger:A:BUS:B1:ETHERnet:TCPHeader:SEQnum:VALue "XXXXXXXXXXXXXXXXXXXX000100010001" TRIGger:A:BUS:B1:ETHERnet:TCPHeader:SEQnum:VALue?
When the Ethernet trigger condition is set to TCPHeader, this command specifies the 16-bit source port address to be used in the trigger, along with the destination port address, sequence number, and acknowledgement number. The default is all X's (don't care); the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string of up to 32 characters containing 0, 1, and X; the specified bits replace the least significant bits. |
:TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDitionset / query
Specifies the condition to use when triggering on a FlexRay bus signal. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | FRAMEType | IDentifier | CYCLEcount | HEADer | DATa | IDANDDATA | EOF | ERRor | Selects the FlexRay trigger condition. |
TRIGGER:A:BUS:B1:FLEXRAY:CONDITION FRAMETYPE sets the FlexRay condition to frame type.
Sets the high value used when triggering on a FlexRay bus cycle count field. The trigger condition must be set to CYCLEcount, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that defines the cycle count high value. |
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:HIVALUE "110010" TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:HIVALUE?
Specifies the qualifier used when triggering on the FlexRay bus cycle count field. The trigger condition must be set to CYCLEcount, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | INrange | OUTrange | Selects the comparison used for the FlexRay cycle count trigger. |
Specifies the low value used when triggering on the FlexRay bus cycle count field. Use the corresponding HIVALue command to set the upper value; the trigger condition must be set to CYCLEcount.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary data string that represents the cycle count low value. |
TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:VALUE "11001101" sets the cycle count value to 11001101. TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:VALUE? might return TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:VALUE "XXXXXX" indicating the cycle count value is don't care.
:TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:HIVALueset / query
Specifies the high value when triggering on the FlexRay bus data field. Use the corresponding DATA:VALue command to set the lower value; the trigger condition must be ID or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary data string that represents the FlexRay data high value. |
TRIGGER:A:BUS:B1:FLEXRAY:DATA:HIVALUE "11001101" TRIGGER:A:BUS:B1:FLEXRAY:DATA:HIVALUE?
:TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:OFFSetset / query
Specifies the offset of the data string, in bytes, when triggering on the FlexRay bus data field. The trigger condition must be set to ID or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 | Offset of the data string in bytes; -1 means don't care and no byte offset is used. |
TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSET 1 TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSET?
Specifies the qualifier to use when triggering on the FlexRay bus data field. The trigger condition must be set to ID or IDANDDATA, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | < | > | = | <= | >= | not = | in range | out of range | Selects the comparison relationship used for the FlexRay data-field trigger. |
:TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:SIZeset / query
Specifies the length of the FlexRay data string, in bytes, when triggering on the bus data field. The trigger condition must be set to ID or IDANDDATA, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 | FlexRay data string length, in bytes. |
TRIGGER:A:BUS:B1:FLEXRAY:DATA:SIZE 8 sets the data string size to 8 bytes. TRIGGER:A:BUS:B1:FLEXRAY:DATA:SIZE? might return TRIGGER:A:BUS:B1:FLEXRAY:DATA:SIZE 1 indicating the data size is 1 byte.
:TRIGger:{A|B}:BUS:B<x>:FLEXray:DATa:VALueset / query
Sets the FlexRay data value used for triggering, or queries the current value. The value is a quoted string; a queried don't-care value may be returned as "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted FlexRay data value. |
string - Returns the FlexRay data value for triggering; "XXXXXXXX" indicates don't care.
TRIGGER:A:BUS:B1:FLEXRAY:DATA:VALUE "11001101" TRIGGER:A:BUS:B1:FLEXRAY:DATA:VALUE?
Returns the FlexRay data value used for triggering. A return of "XXXXXXXX" indicates the data value is don't care.
string - Returns the FlexRay data value used for triggering.
TRIGGER:A:BUS:B1:FLEXRAY:DATA:VALUE?
:TRIGger:{A|B}:BUS:B<x>:FLEXray:EOFTYPEset / query
Specifies the end-of-file type used when triggering on the FlexRay bus EOF field. The trigger condition must be set to EOF with TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | STATic | DYNAMic | ANY | End-of-file type to trigger on. |
TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE ANY TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE? might return TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE STATIC indicating the FlexRay end of file type is STATIC
Specifies the end-of-file type used when triggering on the FlexRay bus EOF field. The trigger condition must first be set to EOF, and the bus number is specified by x.
enum - Returns the currently selected FlexRay EOF type.
TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE ANY TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE? might return TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPE STATIC indicating the FlexRay end of file type is STATIC
:TRIGger:{A|B}:BUS:B<x>:FLEXray:ERRTYPEset / query
Sets the FlexRay trigger error type for the selected bus. The query returns the current error type setting.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | CRCHeader | CRCTrailer | SYNCFrame | STARTupnosync | NULLFRStatic | NULLFRDynamic | Selects which FlexRay error type causes the trigger. |
enum - Returns the current FlexRay trigger error type.
TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE SYNCFRAME TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE? might return TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE CRCHEADER
Sets or queries the FlexRay error type used for triggering on bus B<x>. The query returns the current error type.
enum - Returns the current FlexRay trigger error type.
TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE SYNCFRAME TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPE?
Specifies the high value used when triggering on the FlexRay bus frame ID field. The bus number is specified by x, and the trigger condition must be set to Identifier with the corresponding FlexRay condition command.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary frame ID high value. |
string - Returns the current binary frame ID high value as a quoted string.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUE "11001100101" TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUE?
Specifies the high value used when triggering on the FlexRay bus frame ID field. The trigger condition must be set to IDentifier, and the bus number is specified by x.
string - Returns the binary frame ID high value as a quoted string; may indicate don't care with X characters.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUE "11001100101". TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUE? might return TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUE "XXXXXXXXXXX".
Specifies the qualifier used when triggering on the FlexRay bus frame ID field. The trigger condition must be set to IDentifier, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | INrange | OUTrange | Sets the frame ID qualifier to the selected comparison mode. |
enum - Returns the current frame ID qualifier setting.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER LESSTHAN TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER? TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER EQUAL
Specifies the qualifier to use when triggering on the FlexRay bus frame ID field. The trigger condition must be set to Identifier with TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition.
enum - Returns the current FlexRay frame ID qualifier setting.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER? might return TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER EQUAL indicating the frame ID qualifier is set to equal.
Specifies the low value used when triggering on the FlexRay bus frame ID field. Use the corresponding HIVALue command to set the high value; the trigger condition must be set to IDentifier.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string specifying the FlexRay frame ID low value. |
Specifies the low value used when triggering on the FlexRay bus frame ID field. The trigger condition must be set to IDentifier, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string that is the FlexRay frame ID low value. |
:TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMETypeset / query
Specifies the frame type when triggering on the FlexRay bus signal. The trigger condition must be set to FRAMEType, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | NORMal | PAYLoad | NULL | SYNC | STARTup | Selects the FlexRay frame type. |
TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE PAYLOAD sets the frame type to payload. TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE? might return TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE NORMAL indicating the frame type is set to normal.
Specifies the frame type when triggering on the FlexRay bus signal. The trigger condition must be set to FRAMEType, and the bus number is specified by x.
enum - Returns the current FlexRay frame type setting.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE PAYLOAD sets the frame type to payload. TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE? might return TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPE NORMAL indicating the frame type is set to normal.
:TRIGger:{A|B}:BUS:B<x>:FLEXray:HEADER:CRCset / query
Specifies the CRC portion of the binary header string when triggering on the FlexRay bus signal. The trigger condition must be set to HEADER using TRIGger:{A|B}:BUS:B<x}:FLEXray:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | CRC portion of the binary header string. |
Specifies the CRC portion of the binary header string when triggering on the FlexRay bus signal. The trigger condition must be set to HEADER using :TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | CRC portion of the binary header string. |
Specifies the cycle count portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADER, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that is the cycle count portion of the binary header string. |
TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNT "110010" TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNT?
Specifies the cycle count portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADer, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string for the cycle count portion of the binary header string. |
TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNT "110010" TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNT? might return TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNT "XXXXXX" indicating the cycle count is don't care.
This command specifies the frame ID portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADER using TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string containing the frame ID portion of the binary header string. |
This command specifies the frame ID portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADER using TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that is the frame ID portion of the binary header string. |
Specifies the indicator bits portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADer, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that is the indicator bits portion of the binary header string. |
TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS "11001" sets the indicator bits portion of the header string to TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS? might return TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS
Specifies the indicator bits portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADer, and x selects the bus number.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted string that is the indicator bits portion of the binary header string. |
string - Returns the indicator bits portion of the binary header string, with don't-care bits shown as X characters.
TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS "11001" sets the indicator bits portion of the header string to 11001. TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS? might return TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITS "XXXXX" indicating that the indicator bits portion of the header string are "don't cares".
Specifies the payload length portion of the binary header string when triggering on the FlexRay bus header. The trigger condition must be set to HEADer, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The length of the payload portion of the Binary header string. |
This command specifies the payload length portion of the binary header string when triggering on the FlexRay bus header. The trigger condition needs to be set to HEADER using TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| payload length | string | - | Length of the payload portion of the Binary header string. |
TRIGGER:A:BUS:B1:FLEXRAY:HEADER:PAYLength "11001100101" sets the frame ID portion of the binary header string to 11001100101. TRIGGER:A:BUS:B1:FLEXRAY:HEADER:PAYLength? might return TRIGGER:A:BUS:B1:FLEXRAY:HEADER:FRAMEID "XXXXXXXXXXX" indicating the frame ID portion of the binary header string is "don't care".
:TRIGger:{A|B}:BUS:B<x>:I2C:ADDRess:MODeset / query
Specifies the I2C address mode for the selected bus, choosing either 7-bit or 10-bit addressing. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ADDR7 | ADDR10 | Selects the I2C address mode. |
enum - Returns the current I2C address mode for the selected bus.
TRIGGER:A:BUS:B1:I2C:ADDRESS:MODE ADDR10 sets the I2C address mode to 10-bit. TRIGGER:A:BUS:B1:I2C:ADDRESS:MODE? might return TRIGGER:A:BUS:B1:I2C:ADDRESS:MODE ADDR7 indicating the address mode is set to the 7-bit mode.
Specifies the I2C address mode for the selected bus trigger, choosing between 7-bit and 10-bit addressing. The bus number is specified by x.
enum - Returns the current I2C address mode.
TRIGGER:A:BUS:B1:I2C:ADDRESS:MODE? might return TRIGGER:A:BUS:B1:I2C:ADDRESS:MODE ADDR7
:TRIGger:{A|B}:BUS:B<x>:I2C:ADDRess:VALueset / query
Specifies the binary address string used for the I2C trigger when the trigger condition is ADDRESS or ADDRANDDATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Up to 7 or 10 bits depending on the address mode; only 0, 1, and X are allowed. |
TRIGGER:A:BUS:B1:I2C:ADDRESS:VALUE "1011" sets the I2C address value to XXX1011.
Specifies the binary I2C address string used for the trigger when the trigger condition is ADDRESS or ADDRANDDATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Up to 7- or 10-bit I2C address string, depending on the address mode; only 0, 1, and X are allowed. |
TRIGGER:A:BUS:B1:I2C:ADDRESS:VALUE "1011" sets the I2C address value to XXX1011.
:TRIGger:{A|B}:BUS:B<x>:I2C:CONDitionset / query
Specifies the trigger condition for an I2C trigger on bus B<x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | STARt | STOP | REPEATstart | ACKMISS | ADDRess | DATa | ADDRANDDATA | Selects the I2C trigger condition. |
TRIGGER:A:BUS:B1:I2C:CONDITION START specifies start as the I2C trigger condition. TRIGGER:A:BUS:B1:I2C:CONDITION? might return TRIGGER:A:BUS:B1:I2C:CONDITION START indicating the condition is set to the start condition.
Specifies the trigger condition for an I2C trigger on bus x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | STARt | STOP | REPEATstart | ACKMISS | ADDRess | DATa | ADDRANDDATA | Sets the I2C trigger condition. |
enum - Returns the current I2C trigger condition.
TRIGGER:A:BUS:B1:I2C:CONDITION START TRIGGER:A:BUS:B1:I2C:CONDITION?
:TRIGger:{A|B}:BUS:B<x>:I2C:DATa:DIRectionset / query
Specifies the I2C trigger type to be valid on a read, write, or either condition. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | READ | WRITE | NOCARE | Selects the I2C data direction used for the trigger condition. |
Specifies the I2C trigger data direction as read, write, or either condition based on the R/W bit. The bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:I2C:DATa:SIZeset / query
Specifies the length of the I2C trigger data string in bytes for bus B<x> when the trigger condition is DATA or ADDRANDDATA. Applies to trigger group A or B.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 | Length of the data string in bytes. |
TRIGger:A:BUS:B1:I2C:DATa:SIZe 1 TRIGger:A:BUS:B1:I2C:DATa:SIZe?
Specifies the length of the I2C trigger data string, in bytes, for trigger conditions DATA or ADDRANDDATA. Applies to bus B<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Length of the data string in bytes. |
integer - Returns the current data size in bytes.
TRIGger:A:BUS:B1:I2C:DATa:SIZe 1 sets the data size to 1 byte. TRIGger:A:BUS:B1:I2C:DATa:SIZe? might return TRIGGER:A:BUS:B1:I2C:DATA:SIZE 1 indicating the size is set to 1 byte.
:TRIGger:{A|B}:BUS:B<x>:I2C:DATa:VALueset / query
Specifies the binary data string used for I2C triggering when the trigger condition is DATA or ADDRANDDATA. The bus number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string for the I2C trigger; only 0, 1, and X characters are allowed. |
This command specifies the binary data string used for I3C triggering if the trigger condition is DATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted binary data string used for the I3C trigger data value. |
TRIGger:A:BUS:B1:I3C:DATa:VALue "0101101" sets the address value as 0101101. TRIGger:A:BUS:B1:I3C:DATa:VALue? might return TRIGger:A:BUS:B1:I3C:DATa:VALue "0101101110", indicating that the address value is 0101101110.
:TRIGger:{A|B}:BUS:B<x>:I3C:ERRORTYPeset / query
Specifies the error type used when triggering on I3C errors for the selected bus. The bus number is given by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NACK | TBIT | BADDr | Selects the I3C error condition to trigger on. |
TRIGger:A:BUS:B1:I3C:ERRORTYPe NACK specifies the trigger to happen on NACK error. TRIGger:A:BUS:B1:I3C:ERRORTYPe? might return TRIGger:A:BUS:B1:I3C:ERRORTYPe NACK, indicating that NACK is the currently specified field within a I3C frame to trigger on.
Specifies the I3C error type used when triggering on I3C errors. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NACK | TBIT | BADDr | Selects the I3C error type to trigger on. |
TRIGger:A:BUS:B1:I3C:ERRORTYPe NACK specifies the trigger to happen on NACK error. TRIGger:A:BUS:B1:I3C:ERRORTYPe? might return TRIGger:A:BUS:B1:I3C:ERRORTYPe NACK, indicating that NACK is the currently specified field within a I3C frame to trigger on.
Sets or queries the I3C trigger for SDR broadcast packets on bus B<x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ENSLave | DISLave | ENTasx | RSTDya | ENTRDya | SETMwrl | SETMrdl | DLSLave | ENTRTSTMode | EXTime | SETaasa | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | SETBUSCON | Selects the SDR broadcast packet trigger type. |
Sets or queries the I3C trigger for SDR broadcast packets on bus B<x>. Requires option SRI3C.
enum - Returns the currently specified I3C SDR broadcast packet trigger field.
:TRIGger:{A|B}:BUS:B<x>:I3C:SDR:DIRECTPacketset / query
Sets or queries the I3C trigger for SDR Direct Packets. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ENSLave | DISLave | ENTasx | RSTDya | SETMwrl | SETMrdl | SEText | SETDya | SETNdya | GETMWrl | GETMRdl | GETPrid | GETBusch | GETDevch | GETSlave | ACCM | SETBrt | MDATASpeed | HDRCapability | GETXTime | GETCAPS | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | Trigger condition for the I3C SDR Direct Packet trigger. |
TRIGger:{A|B}:BUS:B<x>:I3C:SDR:DIRECTPacket {ENSLave|DISLave| ENTasx| RSTDya| SETMwrl| SETMrdl|
TRIGger:{A|B}:BUS:B<x>:I3C:SDR:DIRECTPacket?Sets or queries the I3C trigger for SDR Direct Packets. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | ENSLave | DISLave | ENTasx | RSTDya | SETMwrl | SETMrdl | SEText | SETDya | SETNdya | GETMWrl | GETMRdl | GETPrid | GETBusch | GETDevch | GETSlave | ACCM | SETBrt | MDATASpeed | HDRCapability | GETXTime | GETCAPS | ENDXFER | SETGRPa | RSTACT | DEFGRPa | RSTGRPa | MLANe | Specifies the I3C field or event to trigger on. |
enum - Returns the currently specified I3C trigger field for SDR Direct Packets.
TRIGger:A:BUS:B1:I3C:SDR:DIRECTPacket RSTDya TRIGger:A:BUS:B1:I3C:SDR:DIRECTPacket?
:TRIGger:{A|B}:BUS:B<x>:I3C:TBIT:DIREctionset / query
Sets the I3C T-bit trigger direction for bus B<x> on trigger group A or B. READ selects T-bit Parity Error and is the default; WRITe selects T-bit Slave Error.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | READ | WRITe | Sets the trigger condition to the selected I3C T-bit error type. |
enum - Returns the currently selected I3C T-bit trigger direction.
TRIGger:A:BUS:B1:I3C:TBIT:DIREction READ TRIGger:A:BUS:B1:I3C:TBIT:DIREction?
Sets or queries the I3C T-bit trigger error type for bus B<x> on trigger A or B. READ selects T-bit Parity Error, and WRITe selects T-bit Slave Error.
enum - Returns the currently selected T-bit error type for the I3C trigger.
TRIGger:A:BUS:B1:I3C:TBIT:DIREction READ TRIGger:A:BUS:B1:I3C:TBIT:DIREction?
:TRIGger:{A|B}:BUS:B<x>:LIN:CONDitionset / query
Specifies the trigger condition for LIN. The bus number is specified by x. Requires option 5-SRAERO or SUP5-SRAERO Triggering and Analysis application.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNCfield | IDentifier | DATa | IDANDDATA | WAKEup | SLEEP | ERRor | Selects the LIN trigger condition. |
TRIGGER:A:BUS:B1:LIN:CONDITION ERROR sets the LIN trigger condition to error. TRIGGER:A:BUS:B1:LIN:CONDITION? might return TRIGGER:A:BUS:B1:LIN:CONDITION SYNCFIELD indicating the LIN trigger condition is sync field.
Specifies the LIN trigger condition for the selected bus. The bus number is specified by x and the command requires the 5-SRAERO or SUP5-SRAERO Triggering and Analysis application.
enum - Returns the current LIN trigger condition.
TRIGGER:A:BUS:B1:LIN:CONDITION ERROR TRIGGER:A:BUS:B1:LIN:CONDITION? might return TRIGGER:A:BUS:B1:LIN:CONDITION SYNCFIELD indicating the LIN trigger condition is sync field.
:TRIGger:{A|B}:BUS:B<x>:LIN:DATa:HIVALueset / query
Sets the LIN trigger high value for bus B<x> on trigger A or B. The value is a quoted binary data string used when the trigger condition is ID or IDANDDATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted binary data string used for the LIN trigger high value. |
TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE "11001010" TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE?
Sets or queries the LIN data high value used for trigger conditions ID or IDANDDATA. The query returns the current high value string, with "XXXXXXXX" indicating don't care.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Quoted binary data string used for LIN trigger if the trigger condition is ID or IDANDDATA. |
string - Current LIN data high value string; "XXXXXXXX" indicates don't care.
TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE "11001010" TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE?
:TRIGger:{A|B}:BUS:B<x>:LIN:DATa:QUALifierset / query
Sets the LIN data qualifier for the trigger condition. It applies only when the trigger condition is IDANDDATA or DATA, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LESSthan | MOREthan | EQual | UNEQual | LESSEQual | MOREEQual | INrange | OUTrange | Specifies the LIN data qualifier. |
TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER OUTRANGE sets the data qualifier to out of range. TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER? might return TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER EQUAL
Specifies the LIN data qualifier for the trigger. It applies only when the trigger condition is IDANDDATA or DATA.
enum - Returns the current LIN data qualifier setting.
TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER OUTRANGE sets the data qualifier to out of range. TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER? might return TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER EQUAL indicating the data qualifier is set to equal.
:TRIGger:{A|B}:BUS:B<x>:LIN:DATa:SIZeset / query
Specifies the length of the LIN trigger data string in bytes. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | - | Size of the data string in bytes. |
TRIGGER:A:BUS:B1:LIN:DATA:SIZE 8 sets the data size to 8 bytes. TRIGGER:A:BUS:B1:LIN:DATA:SIZE? might return TRIGGER:A:BUS:B1:LIN:DATA:SIZE 1 indicating the data size is 1 byte.
Specifies the length of the LIN trigger data string in bytes. The bus number is specified by x.
integer - Returns the current data string length in bytes.
TRIGGER:A:BUS:B1:LIN:DATA:SIZE 8 sets the data size to 8 bytes. TRIGGER:A:BUS:B1:LIN:DATA:SIZE? might return TRIGGER:A:BUS:B1:LIN:DATA:SIZE 1 indicating the data size is 1 byte.
:TRIGger:{A|B}:BUS:B<x>:LIN:DATa:VALueset / query
Specifies the binary data string to be used for the LIN trigger condition when the trigger condition is ID or IDANDDATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string containing the LIN trigger data value. |
TRIGGER:A:BUS:B1:LIN:DATA:VALUE "11001101" sets the data value to 11001101. TRIGGER:A:BUS:B1:LIN:DATA:VALUE? might return TRIGGER:A:BUS:B1:LIN:DATA:VALUE "XXXXXXXX" indicating the data value is don't care.
Specifies the binary data string to be used for the LIN trigger condition when the trigger condition is ID or IDANDDATA. The bus number is specified by x.
string - Returns the current LIN trigger data value as a quoted string.
TRIGGER:A:BUS:B1:LIN:DATA:VALUE "11001101" sets the data value to 11001101. TRIGGER:A:BUS:B1:LIN:DATA:VALUE? might return TRIGGER:A:BUS:B1:LIN:DATA:VALUE "XXXXXXXX" indicating the data value is don't care.
:TRIGger:{A|B}:BUS:B<x>:LIN:ERRTYPEset / query
Sets the LIN error type for the specified bus trigger. The error type can be SYNC, parity, or checksum.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | SYNC | PARity | CHecksum | LIN error type to set. |
TRIGGER:A:BUS:B1:LIN:ERRTYPE CHECKSUM TRIGGER:A:BUS:B1:LIN:ERRTYPE? might return TRIGGER:A:BUS:B1:LIN:ERRTYPE SYNC
Sets the LIN error type for a bus trigger on the selected A or B trigger system and bus number. The query returns the current LIN error type.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SYNC | PARity | CHecksum | Selects the LIN error type. |
enum - Returns the current LIN error type.
TRIGGER:A:BUS:B1:LIN:ERRTYPE CHECKSUM TRIGGER:A:BUS:B1:LIN:ERRTYPE?
:TRIGger:{A|B}:BUS:B<x>:LIN:IDentifier:VALueset / query
This command specifies the binary address string used for LIN bus trigger if the trigger condition is ID or IDANDDATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary address string used for the LIN trigger. |
TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE "110010" TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE?
Sets or queries the binary address string used for LIN bus trigger when the trigger condition is ID or IDANDDATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary address string used for LIN trigger if the trigger condition is ID or IDANDDATA. |
string - Returns the binary address string used for LIN trigger value.
TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE "110010" TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE?
Sets or queries the high value used when triggering on command word addresses for a MIL-STD-1553 bus. The trigger condition must be COMMAND, and the address qualifier must be INrange or OUTrange.
Sets or queries the high value used when triggering on command word addresses for a MIL-STD-1553 bus. The trigger condition must be COMMAND, and the address qualifier must be INrange or OUTrange.
returns
Sets or queries the qualifier used when triggering on command word addresses for a MIL-STD-1553 bus. The trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use when triggering on command word addresses. |
enum - Returns the current address qualifier.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:QUALIFIER LESSTHAN sets the address qualifier to less than. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the qualifier used when triggering on command word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to COMMAND.
enum - Returns the current address qualifier setting.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:QUALIFIER LESSTHAN sets the address qualifier to less than. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:QUALIFIER? might return EQUAL, indicating that the address qualifier is set to equal.
Sets or queries the low value when triggering on command word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| address value | string | - | The address value. |
string - Returns the address value.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:VALUE "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:VALUE? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the low value when triggering on command word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Address value to use for triggering. |
string - Returns the current address value.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:VALUE "X1000" TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:VALUE?
Sets or queries the value of the command word "word count" field used for triggering on a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Word count value. |
returns
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:COUNT "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:COUNT? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word "word count" field for a MIL-STD-1553 bus trigger. The bus number is specified by x and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| count | string | - | The word count value. |
string - Returns the current command word word count value.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:COUNT "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:COUNT? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the parity filtering for the MIL-STD-1553 command word trigger. The bus number is specified by x and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| parity | enum | ONE | ZERo | NOCARE | Selects whether command words are filtered by parity bit value or not. |
enum - Returns the current parity filtering state.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:PARITY ONE TRIGGER:A:BUS:B1:MIL1553B:COMMAND:PARITY? might return NOCARE, indicating that command words are not being filtered based on the parity bit value.
Sets or queries the parity-bit filter for MIL-STD-1553 command words to trigger on. The trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Filters command words by parity-bit value, or disables parity-bit filtering. |
enum - Indicates the current parity-bit filtering mode for command words.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:PARITY ONE TRIGGER:A:BUS:B1:MIL1553B:COMMAND:PARITY? might return NOCARE, indicating that command words are not being filtered based on the parity bit value.
Sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus to trigger on. The bus number is specified by x, and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The subaddress value. |
string - Returns the current subaddress value.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:SUBADDRESS "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:COMMAND:SUBADDRESS? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus trigger. The bus number is specified by x, and the trigger condition must be set to COMMAND.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The subaddress value. |
string - Returns the configured subaddress value.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:SUBADDRESS "X1000" TRIGGER:A:BUS:B1:MIL1553B:COMMAND:SUBADDRESS?
Sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to trigger on. The bus number is specified by x, and the trigger condition must be set to COMMAND.
Sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to trigger on. The bus number is specified by x, and the trigger condition must be set to COMMAND.
:TRIGger:{A|B}:BUS:B<x>:MIL1553B:CONDitionset / query
Sets or queries the field or condition for a MIL-STD-1553 bus to trigger on. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | COMMAND | STATus | DATA | TIMe | ERRor | Condition to trigger on. |
enum - Returns the current trigger condition for the MIL-STD-1553 bus.
TRIGGER:A:BUS:B1:MIL1553B:CONDITION DATA TRIGGER:A:BUS:B1:MIL1553B:CONDITION? might return SYNC, indicating that the bus is triggering on sync pulses found in any word.
Sets or queries the field or condition for a MIL-STD-1553 bus to trigger on. The bus number is specified by x.
enum - Returns the current trigger condition for the MIL-STD-1553 bus.
TRIGGER:A:BUS:B1:MIL1553B:CONDITION DATA specifies finding matching data word(s). TRIGGER:A:BUS:B1:MIL1553B:CONDITION? might return SYNC, indicating that the bus is triggering on sync pulses found in any word.
:TRIGger:{A|B}:BUS:B<x>:MIL1553B:DATa:PARityset / query
Sets or queries the parity-bit filter used when triggering on MIL-STD-1553 data words on the specified bus. The trigger condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| parity | enum | ONE | ZERo | NOCARE | Parity-bit selection for data-word filtering. |
enum - Returns the current parity-bit filter setting.
TRIGGER:A:BUS:B1:MIL1553B:DATA:PARITY ONE TRIGGER:A:BUS:B1:MIL1553B:DATA:PARITY? might return NOCARE
Sets or queries the value of the command word parity bit for a MIL-STD-1553 bus trigger. The bus number is specified by x, and the trigger condition must be set to DATA.
enum - Returns the current parity-bit filtering setting for the selected MIL-STD-1553 bus trigger.
TRIGGER:A:BUS:B1:MIL1553B:DATA:PARITY ONE TRIGGER:A:BUS:B1:MIL1553B:DATA:PARITY?
:TRIGger:{A|B}:BUS:B<x>:MIL1553B:DATa:VALueset / query
Sets or queries the value used when triggering on MIL-STD-1553 data words. The bus number is specified by x, and the trigger condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | The data value. |
string - Returns the current data value used for triggering on data words.
TRIGGER:A:BUS:B1:MIL1553B:DATA:VALUE "XXXXXXXXXXXX1000" TRIGGER:A:BUS:B1:MIL1553B:DATA:VALUE?
Sets or queries the data value used when triggering on MIL-STD-1553 data words. The bus number is specified by x, and the trigger condition must be set to DATA.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The data value. |
string - Returns the current data value as a quoted string.
TRIGGER:A:BUS:B1:MIL1553B:DATA:VALUE "XXXXXXXXXXXX1000" TRIGGER:A:BUS:B1:MIL1553B:DATA:VALUE?
:TRIGger:{A|B}:BUS:B<x>:MIL1553B:ERRTYPeset / query
Sets or queries the type of error condition for a MIL-STD-1553 bus trigger. The bus number is specified by x, and the trigger condition must be set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | PARity | SYNC | DATA | Error condition to trigger on. |
enum - Returns the current MIL-STD-1553 error trigger type.
TRIGGER:A:BUS:B1:MIL1553B:ERRTYPE DATA TRIGGER:A:BUS:B1:MIL1553B:ERRTYPE? might return PARITY, indicating that the bus is triggering on parity errors in any word.
Sets or queries the error condition type for a MIL-STD-1553 bus trigger. The bus number is specified by x, and the trigger condition must be set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | PARity | SYNC | DATA | Error condition type to trigger on. |
enum - Returns the currently selected MIL-STD-1553 error trigger type.
TRIGGER:A:BUS:B1:MIL1553B:ERRTYPE DATA specifies triggering on non-contiguous data words. TRIGGER:A:BUS:B1:MIL1553B:ERRTYPE? might return PARITY, indicating that the bus is triggering on parity errors in any word.
Sets or queries the high value when triggering on status word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to STATus with the address qualifier INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Address value to use as the high value. |
string - Returns the current high value address setting.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:HIVALUE "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:HIVALUE? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the high value used when triggering on status word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to STATus with the address qualifier INrange or OUTrange.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The address value. |
string - Returns the current high value address setting.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:HIVALUE "X1000" sets the value to X1000. TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:HIVALUE? might return "XXXXX", indicating that the value is XXXXX.
Sets or queries the qualifier used when triggering on status word addresses for a MIL-STD-1553 bus. The trigger condition must be set to STATus, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Selects the data qualifier for the status word address trigger. |
enum - Returns the current status word address qualifier.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:QUALIFIER LESSTHAN TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:QUALIFIER?
Sets or queries the low value used when triggering on status word addresses for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | The address value. |
Sets or queries the broadcast command received (BCR) bit value in a MIL-STD-1553 status word used for triggering. The trigger condition must be set to STATus, and the bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words match BCR bit = 1, BCR bit = 0, or do not care. |
enum - Returns the current filtering state for the BCR bit.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BCR ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BCR? might return NOCARE, indicating that status words are not being filtered based on the BCR bit value.
Sets or queries the value of the busy bit (BUSY bit, bit 16) in a MIL-STD-1553 status word used for triggering. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Selects whether status words match only BUSY bit value 1, only value 0, or are not filtered on BUSY bit. |
enum - Returns the current BUSY-bit filter setting.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BUSY{ONE|ZERo|NOCARE}
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BUSY?Sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a MIL-STD-1553 status word used for triggering. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether to filter status words by the DBCA bit value or not. |
enum - Returns the current filtering state of the DBCA bit.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:DBCA ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:DBCA?
Sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a MIL-STD-1553 status word to trigger on. The trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Selects whether status words must match the INSTR bit being 1, 0, or not cared about. |
enum - Returns the current filtering state for the INSTR bit.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:INSTR ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:INSTR?
Sets or queries the value of the message error bit (ME bit, bit 9) in a MIL-STD-1553 status word to trigger on. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filtering state for the ME bit. |
enum - Returns the current ME-bit filtering state.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:ME ONE specifies filtering status words for those where the ME bit has a value of 1. TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:ME? might return NOCARE, indicating that status words are not being filtered based on the ME bit value.
Sets or queries the value of the SRQ bit in a MIL-STD-1553 status word to trigger on. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filters status words based on the SRQ bit value. |
enum - Returns the current SRQ-bit filtering state.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:SRQ ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:SRQ?
Sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a MIL-STD-1553 status word to trigger on. The trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Filters status words based on the SUBSF bit value, or disables filtering on that bit. |
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:SUBSF ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:SUBSF?
Sets or queries filtering of status words based on the TF bit for a MIL-STD-1553 bus trigger. ONE matches TF=1, ZERo matches TF=0, and NOCARE disables TF-bit filtering.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ONE | ZERo | NOCARE | Filtering state for the TF bit. |
enum - Returns the current TF-bit filtering state.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:TF ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:TF? might return NOCARE
Sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to trigger on. The bus number is specified by x, and the trigger condition must be set to STATus.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ONE | ZERo | NOCARE | Selects whether status words match parity bit value 1, parity bit value 0, or no parity filtering. |
enum - Returns the current parity-bit filtering state.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:parity ONE TRIGGER:A:BUS:B1:MIL1553B:STATUS:parity? might return NOCARE, indicating that status words are not being filtered based on the parity bit value.
Sets or queries the lower limit used when triggering on response time or inter-message gap time for a MIL-STD-1553 bus. The bus number is specified by x, and the trigger condition must be set to TIMe.
Sets or queries the upper limit used when triggering on MIL-STD-1553 response time or inter-message gap time. The bus number is specified by x, and the trigger condition must be set to TIMe.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | Floating point number that specifies the upper bound for measuring remote terminal response time (RT) or the inter-message gap (IMG) in seconds. |
real (s) - Returns the upper bound for comparison in seconds.
TRIGGER:A:BUS:B1:MIL1553B:TIME:MORELIMIT 15.0000e-6 TRIGGER:A:BUS:B1:MIL1553B:TIME:MORELIMIT? might return 12.0000E-6
Sets or queries the qualifier used when triggering on response time or inter-message gap time for a MIL-STD-1553 bus. The trigger condition must be set to TIMe.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | LESSthan | MOREthan | INrange | OUTrange | Selects the time comparison qualifier. |
enum - Returns the current time comparison qualifier.
TRIGGER:A:BUS:B1:MIL1553B:TIME:QUALIFIER LESSTHAN TRIGGER:A:BUS:B1:MIL1553B:TIME:QUALIFIER? might return OUTRANGE, indicating that the qualifier is set to out-of-range comparison.
:TRIGger:{A|B}:BUS:B<x>:PARallel:DATa:VALueset / query
Specifies the binary data string used for a Parallel Bus trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | The binary data string used for a Parallel Bus trigger. |
TRIGger:A:BUS:B1:PARallel:DATa:VALue "11001101" TRIGger:A:BUS:B1:PARallel:DATa:VALue?
:TRIGger:{A|B}:BUS:B<x>:RS232C:CONDitionset / query
Specifies the condition for an RS-232C trigger on the selected bus number x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | STARt | EOp | DATa | PARItyerror | Trigger condition to use for the RS-232C trigger. |
TRIGger:A:BUS:B1:RS232C:CONDition DATA TRIGger:A:BUS:B1:RS232C:CONDition?
:TRIGger:{A|B}:BUS:B<x>:RS232C:DATa:SIZeset / query
Sets or queries the length of the data string in bytes to be used for an RS-232C trigger when the trigger condition is Data. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | bytes | Data size in bytes. |
integer (bytes) - Returns the data size in bytes.
TRIGGER:A:BUS:B1:RS232C:DATA:SIZE 3 TRIGGER:A:BUS:B1:RS232C:DATA:SIZE?
:TRIGger:{A|B}:BUS:B<x>:RS232C:DATa:VALueset / query
Sets or queries the data address string used for the RS-232 bus trigger when the trigger condition is set to Data. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Address value as a string of 0, 1, or X representing a binary number. |
string - Returns the current data address string used for the RS-232 bus trigger.
TRIGGER:A:BUS:B1:RS232C:DATA:VALUE "011XX11" TRIGGER:A:BUS:B1:RS232C:DATA:VALUE?
:TRIGger:{A|B}:BUS:B<x>:SENT:CONDitionset / query
Sets or queries the trigger condition for a SENT bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| condition | enum | START | FAST | SLOW | ERRor | Trigger condition for the SENT bus. |
enum - Returns the current SENT bus trigger condition.
TRIGGER:A:BUS:B1:SENT:CONDITION START specifies triggering on start of packet. TRIGGER:A:BUS:B1:SENT:CONDITION? might return TRIGGER:A:BUS:B1:SENT:CONDITION ERROR, indicating the bus is triggering on errors.
:TRIGger:{A|B}:BUS:B<x>:SENT:ERRTypeset / query
Sets or queries the error type used when triggering on SENT data. Requires option 5SRAUTOSEN and the SENT bus trigger condition set to ERRor.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | CRC | Specifies triggering on CRC errors. |
enum - Returns the current SENT error type setting.
:TRIGger:{A|B}:BUS:B<x>:SENT:ERRType:CRCset / query
Sets or queries the CRC error type used when triggering on SENT data. The CRC error type can be set to FAST or SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| mode | enum | FAST | SLOW | Selects the CRC error type speed. |
enum - Returns the current CRC error type setting.
TRIGger:A:BUS:B1:SENT:ERRType:CRC FAST TRIGger:A:BUS:B1:SENT:ERRType:CRC?
Sets or queries the high binary fast channel 1 value used when triggering on a SENT bus signal. Requires SRAUTOSEN and SENT bus trigger condition FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Sets the Fast Channel 1 binary data high value. |
TRIGger:A:BUS:B12:SENT:FAST:CHAN1A:HIVALue "XXXXXXXXXXXX" TRIGger:A:BUS:B3:SENT:FAST:CHAN1A:HIVALue?
Sets or queries the binary fast channel 1 value used when triggering on a SENT bus signal. The search trigger condition must be set to FAST and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary fast channel 1 value to use for triggering. |
string - Returns the binary fast channel 1 value used when triggering on a SENT bus signal.
TRIGGER:A:BUS:B2:SENT:FAST:CHAN1A:VALue <QString> TRIGGER:A:BUS:B2:SENT:FAST:CHAN1A:VALue?
Sets or queries the binary fast channel 1 value used when triggering on a SENT bus signal. Requires option SRAUTOSEN and the search trigger condition to be set to FAST.
TRIGger:{A|B}:BUS:B<x>:SENT:FAST:CHAN1A:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:SENT:FAST:CHAN1A:VALue?Sets or queries the high binary fast channel 2 value used when triggering on a SENT bus signal. Requires option SRAUTOSEN and the search trigger condition to be set to FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Sets the Fast Channel 2 high binary data value. |
TRIGger:A:BUS:B2:SENT:FAST:CHAN2B:HIVALue "100000000000" TRIGger:A:BUS:B4:SENT:FAST:CHAN2B:HIVALue? might return TRIGGER:A:BUS:B4:SENT:FAST:CHAN2B:HIVALUE "0101XXXX1111"
Sets or queries the qualifier used for fast SENT bus trigger on channel 2. The trigger condition must be FAST.
enum - Returns the current fast channel 2 data qualifier trigger setting.
TRIGGER:A:BUS:B2:SENT:FAST:CHAN2B:QUALIFIER UNEQUAL TRIGGER:A:BUS:B5:SENT:FAST:CHAN2B:QUALIFIER? TRIGGER:A:BUS:B1:SENT:FAST:CHAN2B:QUALIFIER MOREEQUAL
Sets or queries the binary fast channel 2 value used when triggering on a SENT bus signal. The trigger condition must be set to FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary fast channel 2 value to use for triggering. |
Sets or queries the high binary fast message counter value to be used when triggering on a SENT bus signal. Requires the SENT bus trigger condition to be FAST, with one channel and a nibble count of 6.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | string | - | Bus identifier number. |
| value | string | - | Sets the Fast Channel 1 counter binary value. |
TRIGger:A:BUS:B1:SENT:FAST:COUNTer:HIVALue "XXXXXXXX" sets the Fast Channel 1 secure counter high value to "don't care." TRIGger:A:BUS:B3:SENT:FAST:COUNTer:HIVALue? might return TRIGger:A:BUS:B3:SENT:FAST:COUNTer:HIVALue "11110000", indicating a binary value of 11110000.
Sets or queries the SENT fast message counter qualifier used for triggering on a SENT bus signal. Requires option SRAUTOSEN and the SENT bus trigger condition must be FAST.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Sets the fast message counter qualifier to the selected comparison or range condition. |
enum - Returns the current fast message counter qualifier setting.
TRIGger:A:BUS:B2:SENT:FAST:COUNTer:QUALifier UNEQual TRIGger:A:BUS:B5:SENT:FAST:COUNTer:QUALifier?
Sets or queries the binary fast message counter value used when triggering on a SENT bus signal. Requires option SRAUTOSEN, and the search condition must be FAST with the number of channels set to 1 and the nibble count set to 6.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | 0 - 255 | Binary fast message counter value used for the SENT bus trigger. |
integer - Returns the binary fast message counter value used for triggering on a SENT bus signal.
TRIGger:A:BUS:B2:SENT:FAST:COUNTer:QUALifier UNEQual TRIGger:A:BUS:B5:SENT:FAST:COUNTer:QUALifier? TRIGger:A:BUS:B1:SENT:FAST:COUNTer:QUALifier MOREEQual
Sets or queries the binary fast message inverted nibble value used when triggering on a SENT bus signal. It requires SRAUTOSEN, the search condition set to FAST, the number of channels set to 1, and the nibble count set to 6.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary fast message inverted nibble value to use for triggering. |
string - Returns the currently specified binary fast message inverted nibble value within a SENT frame to trigger on.
TRIGger:A:BUS:B1:SENT:FAST:INVERTNIBble:VALue "XXXXXXXX" TRIGger:A:BUS:B1:SENT:FAST:INVERTNIBble:VALue?
Sets or queries the binary status value used when triggering on a SENT bus signal. The value is a binary status string.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | The number of the bus waveform. |
| value | string | - | The binary status value on which to trigger. |
string - The binary status value, expressed as the full command with the current value.
TRIGger:A:BUS:B1:SENT:FAST:STATus:VALue "XXXX" sets the binary status trigger value to XXXX. TRIGger:A:BUS:B1:SENT:FAST:STATus:VALue? might return :TRIGger:A:BUS:B1:SENT:FAST:STATus:VALue "1010", indicating a binary trigger value of 1010.
:TRIGger:{A|B}:BUS:B<x>:SENT:PAUSE:QUALifierset / query
Sets or queries the qualifier used when triggering on SENT pause pulses. Requires option SRAUTOSEN and the SENT bus trigger condition must be set to PAUSE.
Sets or queries the high binary Slow channel data value used when triggering on a SENT bus signal. Requires option SRAUTOSEN and the SENT bus trigger condition to be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Sets the binary Slow channel data value. |
string - Returns the binary Slow channel data value.
TRIGger:{A|B}:BUS:B<x>:SENT:SLOW:DATA:HIVALue <QString>
TRIGger:{A|B}:BUS:B<x>:SENT:SLOW:DATA:HIVALue?Sets or queries the binary identifier value used when triggering on a SENT bus signal. The SENT bus trigger condition must be set to SLOW and option SRAUTOSEN is required.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Selects how the binary identifier value is compared when triggering on the SENT bus signal. |
TRIGger:{A|B}:BUS:B2:SENT:SLOW:DATA:QUALifier LESSEQual
TRIGger:{A|B}:BUS:B5:SENT:SLOW:DATA:QUALifier? might return :TRIGger:{A|B}:BUS:B5:SENT:SLOW:DATA:QUALifier EQual:TRIGger:{A|B}:BUS:B<x>:SENT:SLOW:DATA:VALueset / query
Sets or queries the binary slow channel data value used for SENT slow packet bus triggering. Requires option SRAUTOSEN and the SENT bus trigger condition to be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus identifier number. |
| value | string | - | Binary slow channel data value. |
string - Returns the programmed binary slow channel data value.
TRIGger:A:BUS:B2:SENT:SLOW:DATA:VALue "XXXXXXXX" TRIGger:A:BUS:B4:SENT:SLOW:DATA:VALue?
Sets or queries the qualifier used when triggering on SENT slow packet bus data. Requires option SRAUTOSEN and the SENT bus trigger condition to be set to SLOW.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus identifier number. |
| value | string | - | Binary identifier value. |
string - Returns the current binary identifier value.
TRIGger:A:BUS:B3:SENT:SLOW:IDentifier:VALue "XXXX" sets the identifier value to "don't care" for bus 3.
:TRIGger:{A|B}:BUS:B<x>:SPI:CONDitionset / query
Specifies the trigger condition for a SPI trigger on bus x. The available conditions are SS, STARTofframe, and DATa.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SS | STARTofframe | DATa | Trigger condition for the SPI trigger. |
:TRIGger:{A|B}:BUS:B<x>:SPI:DATa:SIZeset / query
Specifies the length of the data string used for a SPI trigger when the trigger condition is DATa. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus identifier number. |
| length | integer | bytes | Length of the data string. |
:TRIGger:{A|B}:BUS:B<x>:SPI:DATa:VALueset / query
Specifies the binary data string used for SPI triggering when the trigger condition is DATA. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus identifier number. |
| QString | string | - | Data value in the specified valid format; valid characters are 0, 1, and X for binary format. |
TRIGger:A:BUS:B1:SPI:DATa:VALue "11011010"
:TRIGger:{A|B}:BUS:B<x>:SPMI:CONDitionset / query
Sets or queries the trigger condition for the specified SPMI bus. The bus identifier is B<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | - | Bus identifier number. |
| condition | enum | SSC | RESet | SLEep | SHUTdown | WAKeup | MASTERREAd | MASTERWRIte | REGREAd | REGWRIte | DEVICEDESCMASTERREAd | DEVICEDESCSLAVEREAd | EXTREGREAd | EXTREGWRIte | LONGEXTREGREAd | LONGEXTREGWRIte | REG0WRIte | AUTHenticate | TRANSferbusownership | PARItyerror | Trigger condition to use for the specified SPMI bus. |
enum - Returns the current trigger condition for the specified SPMI bus.
TRIGger:A:BUS:B5:SPMI:CONDition SLEep
:TRIGger:{A|B}:BUS:B<x>:SPMI:DATa:SIZeset / query
Sets the size of the SPMI data value used for triggering, in bytes. The query returns the current data size.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 4 | Number of data bytes in the SPMI trigger data pattern. |
integer - Returns the current SPMI data size in bytes.
TRIGger:A:BUS:B1:SPMI:DATa:SIZe 1 sets the data value to 1 byte. TRIGger:A:BUS:B1:SPMI:DATa:SIZe? might return :TRIGger:A:BUS:B1:SPMI:DATa:SIZe 4, indicating the data pattern has four bytes of data.
:TRIGger:{A|B}:BUS:B<x>:SPMI:DATa:VALueset / query
Sets or queries the binary data string used for SPMI triggering. It applies when the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte.
| Name | Type | Values | Description |
|---|---|---|---|
| data value | string | - | Binary data string that identifies the data value on which to trigger. |
TRIGger:A:BUS:B1:SPMI:DATa:VALue "XXXXXXXX" TRIGger:A:BUS:B5:SPMI:DATa:VALue?
Sets or queries the binary data string that identifies the master address used in SPMI triggering for certain trigger conditions.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary data string that identifies the master address used in SPMI triggering. |
string - Returns the binary data string identifying the master address used in SPMI triggering.
TRIGger:A:BUS:B5:SPMI:MASTERADDRess:VALue? might return TRIGger:A:BUS:B5:SPMI:MASTERADDRess:VALue "XXXX1111", indicating the binary data value on which to trigger for bus B5 is set to XXXX1111.
:TRIGger:{A|B}:BUS:B<x>:SPMI:NORESPonseset / query
Sets or queries whether to trigger on No Response frames.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | TRUE | FALSE | Boolean value that enables or disables triggering on No Response frames. |
enum - Returns whether the bus is set to trigger on No Response frames.
TRIGger:A:BUS:B4:SPMI:NORESPonse TRUE TRIGger:A:BUS:B1:SPMI:NORESPonse?
Sets or queries the binary data string that identifies the register address used in SPMI triggering. It is used when the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Sets or queries the binary data string that identifies the slave address used in SPMI triggering. It applies when the trigger condition is one of RESet, SLEep, SHUTdown, WAKeup, AUTHenticate, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGREWRIte, DEVICEDESCSLAVEREAd, or REG0WRIte.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Binary data string that identifies the slave address on which to trigger. |
string - Binary data string that identifies the slave address used in SPMI triggering.
TRIGger:A:BUS:B1:SPMI:SLAVEADDRess:VALue "0011" sets the binary slave address of bus B1 to 0011.
Sets or queries the command response for SVID bus B<x>. The bus number is specified by x and the command requires the SR-SVID option.
| Name | Type | Values | Description |
|---|---|---|---|
| response | enum | GETREG | GETREGVENDor | GETREGTESTCFG | SETVIDFAST | SETVIDSLOW | SETVIDDECay | SETPS | SETREGADDR | SETREGDATa | SETREGADDRVENDor | SETREGDATAVENDor | SETREGADDRTESTCONFg | SETREGDATATESTCONFg | TESTMODe | SETWP | GETREGPKTRECent | GETREGPKTALERt | GETREGPKTBAD | GETREGVREVENt | Command response to trigger on. |
TRIGger:A:BUS:B1:SVID:COMMand:RESPonse GETREGVENDor specifies GetRegVendor as the command response within a SVID frame to trigger on.
:TRIGger:{A|B}:BUS:B<x>:SVID:COMMand:TYPeset / query
Sets or queries the command type for an SVID bus trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | GET | SET | OPTional | Command type to use within the SVID frame. |
enum - Returns the currently specified command type within a SVID frame to trigger on.
TRIGger:A:BUS:B1:SVID:COMMand:TYPe GET TRIGger:A:BUS:B1:SVID:COMMand:TYPe?
:TRIGger:{A|B}:BUS:B<x>:SVID:CONDitionset / query
Sets or queries the trigger condition for an SVID bus to trigger on. The bus number is specified by x. The available conditions are start condition, slave address, command, payload, or errors.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | integer | 1 | Bus identifier number. |
:TRIGger:{A|B}:BUS:B<x>:SVID:ERRor:TYPeset / query
Sets or queries the error type for SVID bus trigger conditions. The bus number is specified by x.
enum - Returns the currently specified error type for the SVID frame trigger condition.
TRIGger:A:BUS:B1:SVID:ERRor:TYPe NACK specifies NACK as the error type within a SVID frame to trigger on. TRIGger:A:BUS:B1:SVID:ERRor:TYPe? might return :TRIGger:A:BUS:B1:SVID:ERRor:TYPe NACK, indicating that NACK is the currently specified error type within a SVID frame to trigger on.
:TRIGger:{A|B}:BUS:B<x>:SVID:PARity:TYPeset / query
Sets or queries the parity type for SVID bus trigger conditions. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | MASTer | SLAVe | Parity type for the SVID bus. |
enum - Returns the current parity type for the SVID bus.
:TRIGger:{A|B}:BUS:B<x>:SVID:PAYLoad:TYPeset / query
Sets or queries the payload type for SVID bus trigger decoding. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| bus | enum | A | B | Selects trigger bus A or B. |
| x | integer | - | Bus number specified by x. |
| mode | enum | MASTer | SLAVe | Sets the payload type. |
enum - Returns the current payload type for the selected SVID bus trigger.
TRIGger:A:BUS:B1:SVID:PAYLoad:TYPe SLAVe TRIGger:A:BUS:B1:SVID:PAYLoad:TYPe? might return :TRIGger:A:BUS:B1:SVID:PAYLoad:TYPe SLAVe,
:TRIGger:{A|B}:BUS:B<x>:SVID:PAYLoad:VALueset / query
Sets the binary payload value for a SVID bus to trigger on. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Binary payload value to trigger on. |
:TRIGger:{A|B}:BUS:B<x>:SVID:SLAVe:ADDRessset / query
Sets the binary address of the slave for a SVID bus trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| address | string | - | Binary slave address value used for SVID triggering. |
TRIGger:A:BUS:B1:SVID:SLAVe:ADDRess "1010" TRIGger:A:BUS:B1:SVID:SLAVe:ADDRess?
:TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALueset / query
Specifies the binary address string for the upper limit for inside-of-range and outside-of-range qualifiers for the USB trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | string | - | Bus identifier number. |
| address | string | - | Binary address string for the upper limit. |
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALue <QString>
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:HIVALue?:TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALueset / query
Specifies the binary address string used for USB trigger. The trigger condition must be set to TOKEN, and x is the bus identifier number.
| Name | Type | Values | Description |
|---|---|---|---|
| address string | string | 0000000 - 1111111 | Binary address string for the USB trigger. |
TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE "0001000" sets the binary address to 0001000 (08 hex). TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE? might return TRIGGER:A:BUS:B1:USB:ADDRESS:VALUE "1000000", which indicates that the binary address is 100000 (40 hex).
:TRIGger:{A|B}:BUS:B<x>:USB:CONDitionset / query
Specifies the trigger condition for the USB trigger on bus B<x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | RESET | SUSPEND | RESUME | EOP | TOKENPacket | DATAPacket | HANDSHAKEPacket | SPECIALPacket | ERRor | Sets the USB trigger condition. |
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:HIVALueset / query
Specifies the binary data string for the upper limit used by inside-of-range and outside-of-range qualifiers for USB triggering when the trigger condition is DATA. Use :TRIGger:{A|B}:BUS:B<x>:USB:DATa:VALue to set the lower limit.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | 00000000 - 11111111 | Binary data string for the upper limit. |
string - Returns the current upper-limit binary data string.
TRIGGER:A:BUS:B1:USB:DATA:HIVALUE "00001000" sets the upper limit to binary 00001000 (08 hex). TRIGGER:A:BUS:B1:USB:DATA:HIVALUE? might return TRIGGER:A:BUS:B1:USB:DATA:HIVALUE "01111111", which indicates that the upper limit is 01111111 (7F hex).
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:OFFSetset / query
Specifies the data offset in bytes to trigger on. The bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:QUALifierset / query
Sets the qualifier used when triggering on a USB bus signal. The trigger condition must be set to DATAPACKET.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQual | UNEQual | LESSthan | MOREthan | LESSEQual | MOREEQual | INrange | OUTrange | Qualifier to use for USB bus triggering. |
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:SIZeset / query
Specifies the number of contiguous data bytes to trigger on for a USB trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - 16 | Number of contiguous data bytes to trigger on. |
TRIGGER:A:BUS:B1:USB:DATA:SIZE 4 sets the instrument to trigger on four contiguous data bytes. TRIGGER:A:BUS:B1:USB:DATA:SIZE? might return TRIGGER:A:BUS:B1:USB:DATA:SIZE 6 indicating that the instrument will trigger on 6 contiguous data bytes.
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:TYPeset / query
Specifies the data type for a USB trigger on bus B<x>. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | DATA0 | DATA1 | DATA2 | MDATA | Selects the USB data packet type used for triggering. |
TRIGGER:A:BUS:B1:USB:DATA:SIZE 4 TRIGGER:A:BUS:B1:USB:DATA:SIZE?
:TRIGger:{A|B}:BUS:B<x>:USB:DATa:VALueset / query
Specifies the binary data string to be used when triggering on a USB trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | 00000000 - 11111111 | Binary data string used for the USB trigger. |
TRIGGER:A:BUS:B1:USB:DATA:VALUE "00001000" sets the binary address to 00001000 (08 hex). TRIGGER:A:BUS:B1:USB:DATA:VALUE? might return TRIGGER:A:BUS:B1:USB:DATA:VALUE "01000000", which indicates that the binary address is 0100000 (40 hex).
:TRIGger:{A|B}:BUS:B<x>:USB:ENDPoint:VALueset / query
Specifies the binary endpoint string to be used for the USB trigger. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | 0000 - 1111 | Binary endpoint string. |
:TRIGger:{A|B}:BUS:B<x>:USB:ERRTypeset / query
Specifies the USB error type used when the trigger condition is set to ERRor. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| error type | enum | PID | CRC5 | CRC16 | BITSTUFFing | Sets the USB error type. |
enum - Returns the current USB error type setting.
TRIGGER:A:BUS:B1:USB:ERRTYPE PID sets the error trigger condition to packet ID. TRIGGER:A:BUS:B1:USB:ERRTYPE? might return TRIGGER:A:BUS:B1:USB:TYPE PID, indicating the error trigger condition is packet ID.
:TRIGger:{A|B}:BUS:B<x>:USB:HANDSHAKETypeset / query
Specifies the handshake type for the USB trigger on the selected bus. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | NAK | ACK | STALL | NYET | Handshake type for the USB trigger. |
:TRIGger:{A|B}:BUS:B<x>:USB:SOFFRAMENUMberset / query
Specifies the binary data string used for the start-of-frame number when the trigger condition is Token Packet and the token type is Start of Frame. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | 000 0000 0000 - 111 1111 1111 | Binary data string for the start-of-frame number. |
string - Returns the current start-of-frame number as a quoted binary string.
TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER "00000001000" sets the start of frame number to 00000001000 (008 hex). TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER? might return TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER "00000001001", which indicates that the start of frame number is 00000001001 (009 hex).
:TRIGger:{A|B}:BUS:B<x>:USB:SPECIALTypeset / query
This command specifies the packet ID (PID) for the special packet. The bus number is specified by x.
:TRIGger:{A|B}:BUS:B<x>:USB:SPLit:ET:VALueset / query
When triggering on a high-speed USB split transaction, this command specifies the split transaction endpoint type value to trigger on. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | NOCARE | CONTRol | ISOchronous | BULK | INTERRUPT | Split transaction endpoint type to trigger on. |
enum - Returns the current split transaction endpoint type setting.
TRIGGER:A:BUS1:USB:SPLIT:ET:VALUE NOCARE TRIGGER:A:BUS1:USB:SPLIT:ET:VALUE?
:TRIGger:{A|B}:BUS:B<x>:USB:SPLit:HUB:VALueset / query
Sets the USB split transaction endpoint type value to trigger on for a high-speed USB split transaction. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | CONTRol | ISOchronous | BULK | INTERRUPT | Selects the endpoint type value to trigger on. |
TRIGger:A:BUS1:USB:SPLit:ET:VALue NOCARE TRIGger:A:BUS1:USB:SPLit:ET:VALue?
:TRIGger:{A|B}:BUS:B<x>:USB:SPLit:PORT:VALueset / query
Specifies the split transaction port address value to trigger on for a high-speed USB split transaction. The trigger condition must be set to Special with packet type SPLIT; the default is all X’s (don’t care).
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Quoted string up to 7 characters long; valid characters are 0 and 1. |
TRIGger:A:BUS:B1:USB:SPLit:PORT:VALue <QString> TRIGger:A:BUS:B1:USB:SPLit:PORT:VALue?
:TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SC:VALueset / query
When triggering on a high-speed USB split transaction, this command specifies whether to trigger on the start or complete phase of the split transaction, based on the Start/Complete bit field value. The bus number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | SSPLIT | CSPLIT | Selects whether to trigger on either phase, the start phase, or the complete phase of the split transaction. |
enum - Returns the split-transaction start/complete setting.
TRIGger:A:BUS:B1:USB:SPLit:SC:VALue SSPLIT specifies to trigger on the start phase of the split transaction. TRIGger:A:BUS:B1:USB:SPLit:SC:VALue? might indicate NOCARE, specifying that it doesn’t matter whether to trigger on the start or complete phase.
:TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SE:VALueset / query
Sets or queries the split-transaction start/end value used for USB triggering. The value selects which S and E bit combination to match, including special cases for no care, full-speed, low-speed, and isochronous split transactions.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | NOCARE | FULLSPEED | LOWSPEED | ISOSTART | ISOMID | ISOEND | ISOALL | Split transaction value to use for the trigger. |
enum - Returns the selected split transaction value.
TRIGger:A:BUS:B1:USB:SPLit:SE:VALue ISOEND specifies to trigger on the ISOEND split transaction value. TRIGger:A:BUS:B1:USB:SPLit:SE:VALue? might return FULLSPEED.
:TRIGger:{A|B}:BUS:B<x>:USB:TOKENTypeset / query
Sets or queries the USB token type for a bus trigger. The allowed token types are ANY, SOF, OUT, IN, and SETUP.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ANY | SOF | OUT | IN | SETUP | USB token type to select. |
enum - Returns the current USB token type.
TRIGGER:A:BUS:B1:USB:TOKENTYPE SETUP TRIGGER:A:BUS:B1:USB:TOKENTYPE?
:TRIGger:{A|B}:BUS:SOUrceset / query
Sets or queries the source bus for a bus trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| B<x> | - | - | Sets the selected source to the bus. |
returns - Returns the selected source bus (for example, B1).
TRIGGER:A:BUS:SOURCE B2 TRIGGER:A:BUS:SOURCE? might return TRIGGER:A:BUS:SOURCE B1
:TRIGger:{A|B}:EDGE:COUPlingset / query
Sets or queries the type of coupling for the edge trigger. This command is equivalent to selecting Edge from the Trigger Type drop-down in the Trigger setup context menu, and choosing from the Coupling drop-down list.
:TRIGger:{A|B}:EDGE:SLOpeset / query
Sets or queries the slope for the edge trigger. It is equivalent to choosing the Slope setting for Edge trigger type or pressing the front-panel Slope button.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISe | FALL | EITher | Edge trigger slope selection. |
enum - Returns the current edge trigger slope.
TRIGGER:A:EDGE:SLOPE RISE sets the A edge trigger slope to positive, which triggers on the rising edge of the signal. TRIGGER:A:EDGE:SLOPE? might return TRIGGER:A:EDGE:SLOPE FALL, indicating that the A edge trigger slope is negative.
:TRIGger:{A|B}:EDGE:SOUrceset / query
Sets or queries the edge trigger source. For instruments with an Auxiliary Input, AUXiliary can be selected as the trigger source.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<y> | LINE | AUXiliary | Selects the edge trigger source. |
enum - Returns the current edge trigger source.
TRIGGER:A:EDGE:SOURCE CH2 TRIGGER:A:EDGE:SOURCE?
:TRIGger:{A|B}:LEVel:CH<x>set / query
Sets or queries the trigger level for channel x when triggering on an analog channel waveform. Each channel can have an independent trigger level.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | user units | Trigger level for the selected channel. |
TRIGGER:A:LEVEL:CH1 1.5 TRIGGER:A:LEVEL:CH2? might return TRIGGER:A:LEVEL:CH2 1.3000E+00, indicating that the A trigger level for Channel 2 is set to 1.3 V.
:TRIGger:{A|B}:LOGIc:DELTatimeset / query
Specifies or queries the Logic trigger delta time value used as part of the logic trigger condition. The value determines whether the duration of a logic pattern meets the specified time constraints.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | - | The Logic trigger delta time value. |
TRIGger:A:LOGIc:DELTatime 4.5e-9 TRIGger:A:LOGIc:DELTatime?
:TRIGger:{A|B}:LOGIc:FUNCtionset / query
Sets or queries the logical combination of the input channels for logic triggers. It is equivalent to selecting Logic for the Trigger Type and setting or viewing the Define Logic.
| Name | Type | Values | Description |
|---|---|---|---|
| function | enum | AND | NANd | NOR | OR | Logical combination of the input channels for the logic trigger. |
enum - Returns the currently selected logical combination for the logic trigger.
TRIGGER:A:LOGIC:FUNCTION AND TRIGGER:A:LOGIC:FUNCTION?
:TRIGger:{A|B}:LOGIc:INPut:CLOCk:SOUrceset / query
Specifies the channel to use as the clock source for the logic trigger.
Sets or queries the Logic Pattern for the specified analog or digital channel, used with the Define Logic choice to determine when the logic trigger occurs.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | enum | CH<x> | CH<x>_D<x> | Channel for the logic pattern setting. |
| state | enum | HIGH | LOW | X | Logic pattern state for the selected channel. |
enum - Returns the logic pattern setting for the selected channel.
TRIGger:A:LOGICPattern:CH1 HIGH TRIGger:A:LOGICPattern:CH1? TRIGger:A:LOGICPattern:CH1_D0 HIGH TRIGger:A:LOGICPattern:CH1_D0?
:TRIGger:{A|B}:LOGIc:POLarityset / query
Sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic trigger type.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | EITher | Polarity for the clock channel. |
:TRIGger:{A|B}:LOGIc:USECLockedgeset / query
Specifies whether logic trigger type uses the clock source.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | OFF | ON | 0 | 1 | Controls whether logic trigger type uses clock source. |
TRIGger:A:LOGIc:USECLockedge OFF specifies that the clock edge will not be used. TRIGger:A:LOGIc:USECLockedge? might return TRIGGER:A:LOGIC:USECLOCKEDGE 1 indicating that the clock edge will be used.
:TRIGger:{A|B}:LOGIc:WHEnset / query
Sets or queries the condition for generating an A or B logic trigger with respect to the defined input pattern. It is equivalent to selecting Logic for Trigger Type, Use Clock Edge to No, and choosing a trigger condition from the Logic Pattern drop-down list.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | TRUe | FALSe | MOREthan | LESSThan | EQual | UNEQual | Condition for generating the logic trigger. |
:TRIGger:{A|B}:LOWerthreshold:CH<x>set / query
Sets or queries the A or B lower trigger level threshold for the specified channel. The threshold is specified in user units.
| Name | Type | Values | Description |
|---|---|---|---|
| x | real | V | Channel number specified in the command mnemonic. |
real (V) - Returns the lower trigger threshold for the specified channel.
TRIGGER:A:LOWERTHRESHOLD:CH2 1.3 TRIGGER:A:LOWERTHRESHOLD:CH3?
:TRIGger:{A|B}:PULSEWidth:HIGHLimitset / query
Specifies the upper time limit, in seconds, used for pulse-width triggering when detecting pulses inside or outside a range of two values. Use :TRIGger:{A|B}:PULSEWidth:LOWLimit to set the lower limit.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | Upper limit value for pulse-width triggering. |
real (s) - Returns the current upper pulse-width trigger limit in seconds.
:TRIGger:{A|B}:PULSEWidth:LOGICQUALificationset / query
Specifies whether to use logic qualification for a pulse width trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | ON enables logic qualification for the pulse width trigger type; OFF disables it. |
TRIGger:A:PULSEWidth:LOGICQUALification ON turns on logic qualification. TRIGger:A:PULSEWidth:LOGICQUALification? might return TRIGGER:A:PULSEWIDTH:LOGICQUALIFICATION OFF indicating logic qualification is off.
:TRIGger:{A|B}:PULSEWidth:LOWLimitset / query
Specifies the lower limit, in seconds, for pulse width triggering when using a two-value range, or the single time limit for less-than, greater-than, equal-to, or not-equal triggering. Use :TRIGger:{A|B}:PULSEWidth:HIGHLimit to specify the upper limit of the range.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR3> | real | s | Floating point number that represents the lower value of the range. |
:TRIGger:{A|B}:PULSEWidth:POLarityset / query
Specifies the polarity for a pulse width trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | NEGative | POSitive | Sets whether the pulse width trigger responds to a negative or positive pulse. |
enum - Returns the current pulse width trigger polarity.
TRIGger:A:PULSEWidth:POLarity NEGATIVE sets the pulse polarity to negative. TRIGger:A:PULSEWidth:POLarity? might return TRIGGER:A:WIDTH:POLARITY POSITIVE indicating a positive pulse.
:TRIGger:{A|B}:PULSEWidth:SOUrceset / query
Specifies the source waveform for a pulse width trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | Selects the analog or digital input channel used as the pulse-width trigger source. |
enum - Returns the current pulse width trigger source.
TRIGGER:A:PULSEWIDTH:SOURCE CH1 sets channel 1 as the pulse width source. TRIGGER:A:PULSEWIDTH:SOURCE? might return TRIGGER:A:PULSEWIDTH:SOURCE CH1 indicating that channel 1 is the pulse width trigger source.
:TRIGger:{A|B}:PULSEWidth:WHEnset / query
Specifies the pulse-width trigger condition: trigger on pulses that are less than, greater than, equal to, unequal to a set width, or that are within or outside a specified range.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | LESSthan | MOREthan | EQual | UNEQual | WIThin | OUTside | Selects the pulse-width comparison condition used for triggering. |
enum - Returns the currently selected pulse-width trigger condition.
TRIGger:B:PULSEWidth:WHEn LESSthan TRIGger:A:PULSEWidth:WHEn? might return TRIGGER:A:PULSEWIDTH:WHEN GREATER THAN 2.0000E-9, TRIGger:B:PULSEWidth:WHEn? might return TRIGger:B:PULSEWidth:WHEn MOREthan indicating that a trigger is
:TRIGger:{A|B}:RUNT:LOGICQUALificationset / query
Specifies whether logic qualification is used for a runt trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables logic qualification for a runt trigger. |
:TRIGger:{A|B}:RUNT:POLarityset / query
Specifies the polarity for the runt trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | EITher | NEGative | POSitive | Selects whether the runt trigger responds to either polarity, negative polarity, or positive polarity. |
enum - Returns the current runt trigger polarity.
TRIGger:A:RUNT:POLarity NEGATIVE specifies that the polarity of the A pulse runt trigger is negative. TRIGger:A:RUNT:POLarity? might return TRIGGER:A:RUNT:POLARITY POSITIVE indicating that the polarity of the A pulse runt trigger is positive.
:TRIGger:{A|B}:RUNT:SOUrceset / query
Specifies the source waveform for the runt trigger. Digital channels are not supported as runt trigger sources.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | Analog channel number to use as the source waveform for the runt trigger. |
:TRIGger:{A|B}:RUNT:WHEnset / query
Specifies the type of pulse width the trigger checks for when it detects a runt. The query returns the currently selected runt width condition.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | LESSthan | MOREthan | EQual | UNEQual | OCCURS | Selects the runt trigger width condition. |
enum - Returns the currently selected runt width condition.
TRIGger:A:RUNT:WHEn MORETHAN TRIGger:A:RUNT:WHEn?
:TRIGger:{A|B}:RUNT:WIDthset / query
Specifies the width, in seconds, for a runt trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Width, in seconds, used by the runt trigger. |
:TRIGger:{A|B}:SETHold:CLOCk:EDGEset / query
Specifies the clock edge polarity for setup and hold triggering.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | FALL | RISe | Clock edge polarity to use for setup and hold triggering. |
enum - Returns the current clock edge polarity for setup and hold triggering.
TRIGger:A:SETHold:CLOCk:EDGE RISE specifies the polarity as the clock rising edge. TRIGger:A:SETHold:CLOCk:EDGE? might return TRIGGER:A:SETHOLD:CLOCK:EDGE RISE indicating that polarity is specified as the clock rising edge.
:TRIGger:{A|B}:SETHold:CLOCk:SOUrceset / query
Specifies the clock source for setup and hold triggering. The same source cannot be used for both clock and data.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | Clock source waveform to use. |
TRIGger:A:SETHold:CLOCk:SOUrce CH1 specifies channel 1 as the clock source for a setup and hold trigger operation. TRIGger:A:SETHold:CLOCk:SOUrce? might return TRIGGER:A:SETHOLD:CLOCK:SOURCE CH4 indicating that channel 4 is the clock source for a setup and hold trigger operation.
Sets or queries whether the specified channel is included in the Setup & Hold trigger input configuration. The channel number is specified by x.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x>|CH<x>_D<x> | enum | INCLude | DONTInclude | Whether the specified channel is included in the Setup & Hold trigger input configuration. |
enum - Returns whether the specified channel is included in the Setup & Hold trigger input configuration.
TRIGger:A:SETHOLDLogicval:CH1 INCLUDE specifies including the specified channel in the Setup & Hold trigger input configuration. TRIGger:A:SETHOLDLogicval:CH1? might include TRIGGER:A:SETHOLDLOGICVAL:CH1 DONTINCLUDE indicating not to include the channel in the configuration.
:TRIGger:{A|B}:SETHold:HOLDTimeset / query
Specifies the hold time for setup and hold violation triggering. It is equivalent to selecting Setup/Hold Setup from the Trig menu and setting the desired Hold Time.
| Name | Type | Values | Description |
|---|---|---|---|
| hold time | real | s | Floating point hold time setting in seconds; positive values occur after the clock edge and negative values before the clock edge. |
TRIGger:A:SETHold:HOLDTime 3.0E-3 TRIGger:A:SETHold:HOLDTime?
:TRIGger:{A|B}:SETHold:SETTimeset / query
This command specifies the setup time for setup and hold violation triggering. It is equivalent to selecting Setup/Hold Setup from the Trig menu and then setting the desired Setup Time.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | The setup time setting in seconds. |
TRIGger:A:SETHold:SETTime
:TRIGger:{A|B}:TIMEOut:LOGICQUALificationset / query
Specifies whether logic qualification is used for a timeout trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables logic qualification for the timeout trigger. |
enum - Returns the current logic-qualification state for the timeout trigger.
TRIGger:A:TIMEOut:LOGICQUALification ON TRIGger:A:TIMEOut:LOGICQUALification? might include TRIGGER:A:TIMEOUT:LOGICQUALIFICATION OFF
:TRIGger:{A|B}:TIMEOut:POLarityset / query
When using the TIMEOut trigger type, specifies the polarity to be used.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | STAYSHigh | STAYSLow | EITher | Polarity used for the timeout trigger. |
:TRIGger:{A|B}:TIMEOut:SOUrceset / query
When using the TIMEOut trigger type, this command specifies the source. The source can be a live channel or a digital channel; the default is channel 1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | Specifies the timeout trigger source. |
enum - Returns the currently selected timeout trigger source.
TRIGger:A:TIMEOut:SOUrce CH4 specifies to use channel 4 as the source for the timeout trigger. TRIGger:A:TIMEOut:SOUrce? might return CH1, indicating that channel 1 has been set as the source for the timeout trigger.
:TRIGger:{A|B}:TIMEOut:TIMeset / query
Specifies the timeout time, in seconds, when triggering using the TIMEOut trigger type. It is equivalent to setting Time Limit from the Trig menu.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Timeout time in seconds. |
:TRIGger:{A|B}:TRANsition:DELTatimeset / query
Specifies the delta time (Time Limit) used in calculating the transition value for a rise or fall time trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| delta time | real | s | Floating point delta time value in seconds. |
TRIGGER:A:TRANSITION:DELTATIME 15E-6 sets the delta time of the transition trigger to 15 μs. TRIGGER:A:TRANSITION:DELTATIME? might return TRIGGER:A:TRANSITION:DELTATIME 2.0000E-09 indicating that the delta time of the transition trigger is set to 2 ns.
:TRIGger:{A|B}:TRANsition:LOGICQUALificationset / query
Specifies whether to use logic qualification for a transition trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables logic qualification for the transition trigger. |
TRIGger:A:TRANsition:LOGICQUALification ON specifies using logic qualification.
:TRIGger:{A|B}:TRANsition:POLarityset / query
This command specifies the polarity for the transition trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | EITher | NEGative | POSitive | Selects whether a pulse edge must traverse positive, negative, or either polarity for transition triggering to occur. |
TRIGGER:A:TRANSITION:POLARITY NEGATIVE TRIGGER:A:TRANSITION:POLARITY?
:TRIGger:{A|B}:TRANsition:SOUrceset / query
Specifies the source waveform for a transition trigger. Digital channels are not supported as transition trigger sources.
| Name | Type | Values | Description |
|---|---|---|---|
| CH<x> | channel_list | - | One of the analog channels to be used as the source for a transition trigger. |
TRIGGER:A:TRANSITION:SOURCE CH4 TRIGGER:A:TRANSITION:SOURCE?
:TRIGger:{A|B}:TRANsition:WHEnset / query
Sets or queries the A or B transition trigger condition for when the signal transition time is compared with TRIGger:A:TRANsition:DELTatime.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | SLOWer | FASTer | EQual | UNEQual | Selects whether the trigger occurs when the transition time is slower than, faster than, equal to, or not equal to the DELTatime setting. |
enum - Returns the current transition trigger condition.
TRIGGER:A:TRANSITION:WHEN SLOWER TRIGGER:A:TRANSITION:WHEN? might return TRIGGER:A:TRANSITION:WHEN FASTER.
:TRIGger:{A|B}:TYPeset / query
Sets or queries the type of A or B trigger. The trigger type controls which trigger subsystem and parameters are used.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | EDGE | WIDth | TIMEOut | RUNt | WINdow | LOGIc | SETHold | BUS | TRANsition | Selects the trigger type for trigger A or B. |
enum - Returns the current trigger type.
TRIGGER:A:TYPE EDGE sets the A trigger type to EDGE.
:TRIGger:{A|B}:UPPerthreshold:CH<x>set / query
Sets or queries the specified channel upper trigger level. The CH<x> range is 1 to 8 and depends on the number of analog channels on the instrument.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | 1 - 8 | Specified channel number for the trigger level. |
| level | real | user units | Trigger level in user units, usually volts. |
real (user units) - Returns the specified channel upper trigger level.
TRIGGER:A:UPPERTHRESHOLD:CH1 1.3 TRIGGER:A:UPPERTHRESHOLD:CH2?
:TRIGger:{A|B}:VIDeo:FIELDset / query
Specifies the trigger condition for a video trigger.
enum - Returns the current video trigger field setting.
TRIGger:A:VIDeo:FIELD ALLLines TRIGger:A:VIDeo:FIELD?
:TRIGger:{A|B}:VIDeo:LINEset / query
Specifies the line number value for a video line trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| <NR1> | integer | 1 - 625 | Line number to trigger on. |
integer - Returns the configured video trigger line number.
TRIGger:A:VIDeo:LINE 262 TRIGger:A:VIDeo:LINE?
:TRIGger:{A|B}:VIDeo:POLarityset / query
This command specifies the polarity for a video trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSitive | NEGative | Specifies the video trigger polarity. |
enum - Returns the current video trigger polarity.
TRIGger:A:VIDeo:POLarity POSitive specifies to use a positive polarity for the video trigger. TRIGger:A:VIDeo:POLarity? might return TRIGGER:A:VIDeo:POLarity NEGative, indicating that the video trigger has a negative polarity.
:TRIGger:{A|B}:VIDeo:SOUrceset / query
Sets the analog channel used as the video trigger source waveform for trigger A or B. The source channel is specified as CH<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Analog channel to use as the video trigger source waveform. |
TRIGger:A:VIDeo:SOUrce CH2 TRIGger:A:VIDeo:SOUrce? might return TRIGGER:A:VIDeo:SOUrce CH1
:TRIGger:{A|B}:VIDeo:STANdardset / query
Specifies the standard or format used for a video trigger on trigger A or B. The available standards are NTSC, PAL, and SECAM.
| Name | Type | Values | Description |
|---|---|---|---|
| standard | enum | NTSc | PAL | SECAM | Video standard/format to use for the trigger. |
TRIGger:A:VIDeo:STANdard PAL TRIGger:A:VIDeo:STANdard?
:TRIGger:{A|B}:WINdow:CROSSIngset / query
Sets or queries the window trigger threshold crossing for the selected trigger source. The crossing selection is only effective when :TRIGger:{A|B}:WINdow:WHEn is INSIDEGreater or OUTSIDEGreater.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | UPPer | LOWer | EITher | NONe | Selects which threshold crossing the window trigger uses. |
enum - Returns the current window trigger threshold crossing selection.
TRIGger:{A|B}:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
TRIGger:{A|B}:WINdow:CROSSIng?:TRIGger:{A|B}:WINdow:LOGICQUALificationset / query
Specifies whether to use logic qualification for a window trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Turns logic qualification on or off for the window trigger type. |
:TRIGger:{A|B}:WINdow:SOUrceset / query
Sets or queries the source for a window trigger. Digital channels are not supported as window trigger sources.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | enum | CH<x> | Specifies an analog channel as the trigger source. |
enum - Returns the current window trigger source.
:TRIGger:{A|B}:WINdow:WHEnset / query
Sets or queries the window trigger event for trigger A or B. It is equivalent to choosing the Window Setup and Window Trigger When settings from the Trig menu.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ENTERSWindow | EXITSWindow | INSIDEGreater | OUTSIDEGreater | Selects the window trigger event. |
enum - Returns the current window trigger event.
TRIGger:A:WINdow:WHEn EXITSWINDOW specifies a trigger event when the signal leaves the window defined by the threshold levels. TRIGger:A:WINdow:WHEn? might return TRIGGER:A:WINDOW:WHEN ENTERSWINDOW indicating a trigger when the signal enters the window.
:TRIGger:{A|B}:WINdow:WIDthset / query
Sets or queries the minimum width for a window violation. This command is equivalent to selecting Window Setup from the Trig menu and setting the Time Limit for Inside > Limit or Outside > Limit.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | - | Minimum width for a window violation. |
TRIGger:A:WINdow:WIDTH 4.5e-9 sets the minimum width for a window violation to 4.5 ns.
:TRIGger:A:HOLDoff:BYset / query
Sets or queries the type of holdoff for the A trigger. Holdoff types are user-specified time (TIMe), internally calculated random time (RANDom), or USER holdoff until the user releases it.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | TIMe | RANDom | USER | Selects the A trigger holdoff type. |
enum - Returns the current A trigger holdoff type.
TRIGGER:A:HOLDOFF:BY TIME sets the holdoff to the "by time" setting. This enables you to set the holdoff time. TRIGGER:A:HOLDOFF:BY? might return TRIGGER:A:HOLDOFF:BY TIME, indicating that you will set the holdoff time.
:TRIGger:A:HOLDoff:TIMeset / query
Sets or queries the A trigger holdoff time. The holdoff time is specified in seconds and ranges from 0 s to 10 s.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | 0 s - 10 s | Holdoff time in seconds. |
real (s) - Returns the A trigger holdoff time in seconds.
TRIGGER:A:HOLDOFF:TIME 10 TRIGGER:A:HOLDOFF:TIME? might return TRIGGER:A:HOLDOFFTIME 1.2000E-06, indicating that the A trigger holdoff time is set to 1.2 μs.
:TRIGger:A:LOGICQUALificationset / query
Sets or queries the type of logic qualification to perform for trigger A. The available choices are AND, OR, NANd, and NOR.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AND | OR | NANd | NOR | Specifies the logic qualification type. |
enum - Returns the current type of logic qualification.
TRIGGER:A:LOGICQUALIFICATION OR TRIGGER:A:LOGICQUALIFICATION? might return TRIGGER:A:LOGICQUALIFICATION AND
:TRIGger:A:MODeset / query
Sets or queries the A trigger mode. It is equivalent to pushing the Mode button on the front panel.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | NORMal | Selects the A trigger mode. |
enum - Returns the current A trigger mode.
TRIGGER:A:MODE NORMAL sets the trigger mode to normal. TRIGGER:A:MODE? might return TRIGGER:A:MODE AUTO, indicating that the trigger mode is auto.
:TRIGger:AUXLevelset / query
For instruments with an Auxiliary Input, this command sets or queries the Auxiliary Input voltage level used for an edge trigger.
:TRIGger:B:BYset / query
Selects or returns whether the B trigger occurs after a specified number of events or after a specified period of time following the A trigger. The EVENTS setting uses the event count specified by TRIGger:B:EVENTS:COUNt.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | EVENTS | TIMe | Selects whether the B trigger is based on a number of events or a time delay. |
enum - Returns whether the B trigger is set to occur after a number of events or after a time period following the A trigger.
TRIGGER:B:BY TIME sets the B trigger to occur at a set time after the A trigger event. TRIGGER:B:BY? might return TRIGGER:B:BY EVENTS, indicating that the B trigger takes place following a set number of trigger events after the A trigger occurs.
:TRIGger:B:EVENTS:COUNtset / query
Sets or queries the number of events that must occur before the B trigger. The count applies only when TRIGger:B:BY is set to EVENTS.
:TRIGger:B:RESETset / query
Sets the B reset trigger level to 50%.
| Name | Type | Values | Description |
|---|---|---|---|
| SETLevel | enum | - | Sets the B reset trigger level to 50%. |
TRIGger:B:RESET SETLevel sets the B reset trigger level to 50%.
:TRIGger:B:RESET:EDGE:COUPlingset / query
Sets or queries the trigger coupling for a sequential edge trigger reset when the source is set to an analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| coupling | enum | DC | HFRej | LFRej | NOISErej | Trigger coupling mode for a sequential edge trigger reset. |
:TRIGger:B:RESET:EDGE:LEVelset / query
Sets the voltage level used for an Edge Reset trigger when triggering on an analog channel waveform.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | Voltage level to use for an Edge Reset trigger when triggering on an analog channel waveform. |
TRIGGER:B:RESET:EDGE:LEVEL 50.0e-3 TRIGGER:B:RESET:EDGE:LEVEL?
:TRIGger:B:RESET:EDGE:SLOpeset / query
Sets or queries the trigger slope for a sequential edge trigger reset.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISe | FALL | EITher | Selects whether the trigger is reset on the rising, falling, or either edge of the signal. |
enum - Returns the currently selected trigger slope for the sequential edge trigger reset.
TRIGGER:B:RESET:EDGE:SLOPE FALL specifies to reset the trigger on the falling or negative edge of a signal. TRIGGER:B:RESET:EDGE:SLOPE? might return TRIGGER:B:RESET:EDGE:SLOPE RISE indicating the instrument is set to reset the trigger on the rising or positive edge of a signal.
:TRIGger:B:RESET:EDGE:SOUrceset / query
Sets or queries the source used for the B trigger reset edge condition. Analog channels are specified as CH<x>, and digital channels as CH<x>_D<x>.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH<x> | CH<x>_D<x> | Selects the analog or digital channel used as the trigger source. |
enum - Returns the current trigger reset edge source.
TRIGGER:B:RESET:EDGE:SOURCE CH4 TRIGGER:B:RESET:EDGE:SOURCE?
:TRIGger:B:RESET:TIMEOut:TIMeset / query
Sets or queries the reset timer for a sequential timeout trigger reset. The value is specified as an NR3 number.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | - | Reset timer for a sequential timeout trigger reset. |
real - Returns the reset timer for a sequential timeout trigger reset.
TRIGGER:B:RESET:TIMEOUT:TIME 100e-9 TRIGGER:B:RESET:TIMEOUT:TIME?
:TRIGger:B:RESET:TYPeset / query
Sets or queries the type of A→B sequential trigger reset. The reset criteria determine when the instrument restarts searching for a new A event.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | NONe | TIMEOut | EDGE | STATE | Selects the trigger reset type. |
enum - Returns the current trigger reset type.
:TRIGger:B:STATEset / query
Sets or queries the state of B trigger activity. When on, the B trigger is part of the triggering sequence; when off, only the A trigger causes the trigger event.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Sets whether the B trigger is active or inactive. |
| state | integer | - | <NR1> integer value where 0 turns off the B trigger and any other value activates it. |
enum - Returns the B trigger state as 0 for inactive or another value indicating active state.
TRIGGER:B:STATE ON TRIGGER:B:STATE?
:TRIGger:B:TIMeset / query
Sets or queries B trigger delay time in seconds. The B Trigger time applies only if TRIGger:B:BY is set to TIMe.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | B trigger delay time in seconds. |
real (s) - Returns the B trigger delay time in seconds.
:TRIGger:HYSTeresis:USER:STATeset / query
Enables or disables user-defined trigger hysteresis.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Enables or disables user-defined trigger hysteresis. |
TRIGGER:HYSTERESIS:USER:STATE ON enables user-defined trigger hysteresis. TRIGGER:HYSTERESIS:USER:STATE? might return TRIGger:HYSTeresis:USER:STATe 0, indicating that the user-defined trigger hysteresis is disabled.
Returns whether user-defined trigger hysteresis is enabled or disabled.
enum - Returns the user-defined trigger hysteresis state.
TRIGGER:HYSTERESIS:USER:STATE? might return TRIGger:HYSTeresis:USER:STATe 0, indicating that the user-defined trigger hysteresis is disabled.
:TRIGger:HYSTeresis:USER:VALueset / query
Sets or returns the height of the user-defined trigger hysteresis zone in volts.
| Name | Type | Values | Description |
|---|---|---|---|
| value | real | V | Sets the height of the hysteresis zone. |
Sets or returns the height of the user-defined trigger hysteresis zone in volts.
real (V) - Returns the height of the user-defined trigger hysteresis zone in volts.
:TRIGger:STATE?query
Returns the current state of the triggering system.
enum - Current triggering system state.
TRIGGER:STATE? might return TRIGGER:STATE ARMED, indicating that the pretrigger data is being acquired.
:TRIGger:STATUs?query
Returns the current status of the triggering system.
enum - ARM indicates that the instrument is acquiring pretrigger information. AUTO indicates that the instrument is in the automatic mode and acquires data even in the absence of a trigger. REA indicates that all pretrigger information is acquired and that the instrument is ready to accept a trigger. SAV indicates that the instrument is in save mode and is not acquiring data. TRIG indicates that the instrument triggered and is acquiring the post trigger information.
:TRIGGER:A:BUS:B1:AUDIO:CONDITIONset / query
Sets the trigger condition for bus B1 audio triggering. The factory default is SOF.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | Trigger condition for the audio bus trigger. |
:TRIGGER:A:BUS:B1:AUDIO:DATA:HIVALUEset / query
Sets the high-value audio data pattern used for bus B1 trigger qualification. The factory default value is a 24-character string of Xs.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High-value audio data pattern. |
:TRIGGER:A:BUS:B1:AUDIO:DATA:OFFSETset / query
Sets the offset used for audio trigger data on bus B1. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | - | Offset value for the audio data trigger. |
:TRIGGER:A:BUS:B1:AUDIO:DATA:QUALIFIERset / query
Sets the audio data qualifier for bus B1 trigger A. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Audio data qualifier setting. |
:TRIGGER:A:BUS:B1:AUDIO:DATA:VALUEset / query
Sets the audio data value used by bus trigger B1. The factory default is a quoted string of X characters.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Audio data value. |
:TRIGGER:A:BUS:B1:AUDIO:DATA:WORDset / query
Sets which word selection is used for the bus B1 audio data trigger condition.
| Name | Type | Values | Description |
|---|---|---|---|
| word | enum | EITHER | Selects the word matching mode for the audio data trigger. |
:TRIGGER:A:BUS:B1:CAN:CONDITIONset / query
Sets the CAN trigger condition for bus B1. The factory default is SOF.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | CAN trigger condition. |
:TRIGGER:A:BUS:B1:CAN:DATA:DIRECTIONset / query
Sets the CAN data direction trigger condition for bus B1. The factory default is NOCARE.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | NOCARE | CAN data direction condition. |
:TRIGGER:A:BUS:B1:CAN:DATA:OFFSETset / query
Sets the CAN data offset for bus B1 trigger A. The factory default value is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | - | CAN data offset value. |
:TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIERset / query
Sets the CAN data qualifier used for trigger bus B1. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Qualifier for the CAN data comparison. |
:TRIGGER:A:BUS:B1:CAN:DATA:SIZEset / query
Sets the CAN data field size for trigger A, bus B1. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | Data field size. |
:TRIGGER:A:BUS:B1:CAN:DATA:STARTset / query
Sets the start value for CAN data comparison in bus trigger B1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| start | real | - | Start value for the CAN data comparison. |
:TRIGGER:A:BUS:B1:CAN:DATA:VALUEset / query
Sets the CAN data value used for trigger bus B1. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | CAN data value. |
:TRIGGER:A:BUS:B1:CAN:FRAMETYPEset / query
Selects the CAN frame type used for the bus trigger. The factory default is DATA.
:TRIGGER:A:BUS:B1:CAN:IDENTIFIER:MODEset / query
Sets the CAN identifier mode for bus B1. The factory default is STANDARD.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | STANDARD | CAN identifier mode. |
:TRIGGER:A:BUS:B1:CAN:IDENTIFIER:VALUEset / query
Sets the CAN identifier value used for trigger bus B1. The factory default is "XXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | CAN identifier value. |
:TRIGGER:A:BUS:B1:FLEXRAY:CONDITIONset / query
Sets the FlexRay trigger condition for bus B1. The factory default is SOF.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SOF | FlexRay trigger condition. |
:TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:HIVALUEset / query
Sets the high value used for the FlexRay cycle count trigger condition. The factory default is "XXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| hivalue | string | - | High value for the FlexRay cycle count comparison. |
Sets the qualifier used for the FlexRay cycle count trigger condition. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Qualifier for the FlexRay cycle count trigger condition. |
:TRIGGER:A:BUS:B1:FLEXRAY:CYCLECOUNT:VALUEset / query
Sets the FlexRay cycle count value used for trigger qualification. The factory default is "XXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay cycle count value. |
:TRIGGER:A:BUS:B1:FLEXRAY:DATA:HIVALUEset / query
Sets the high value used for FlexRay data trigger matching. The default factory value is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| hivalue | string | - | High-value pattern for the FlexRay data trigger. |
:TRIGGER:A:BUS:B1:FLEXRAY:DATA:OFFSETset / query
Sets the FlexRay data offset for trigger A bus B1. The factory default is -1.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 | FlexRay data offset. |
:TRIGGER:A:BUS:B1:FLEXRAY:DATA:QUALIFIERset / query
Sets the comparison qualifier for the FlexRay data field. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Comparison qualifier for the FlexRay data field. |
:TRIGGER:A:BUS:B1:FLEXRAY:DATA:SIZEset / query
Sets the FlexRay data size for trigger bus B1. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | Number of data items used for the FlexRay trigger data match. |
:TRIGGER:A:BUS:B1:FLEXRAY:DATA:VALUEset / query
Sets the FlexRay data value used in trigger bus B1. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay data value. |
:TRIGGER:A:BUS:B1:FLEXRAY:EOFTYPEset / query
Sets the FlexRay EOF type for trigger A bus B1. The factory default is STATIC.
:TRIGGER:A:BUS:B1:FLEXRAY:ERRTYPEset / query
Sets the FlexRay error type used for trigger A bus B1. The factory default is CRCHEADER.
:TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:HIVALUEset / query
| Name | Type | Values | Description |
|---|---|---|---|
| hivalue | - | - |
:TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIERset / query
Sets the FlexRay frame ID qualifier used for bus trigger condition matching. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | Selects the comparison qualifier for the FlexRay frame ID value. |
:TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:VALUEset / query
Sets the FlexRay frame ID value for bus B1 trigger conditions. The factory default value shown is "XXXXXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | FlexRay frame ID value. |
:TRIGGER:A:BUS:B1:FLEXRAY:FRAMETYPEset / query
Sets the FlexRay frame type for bus trigger B1. The factory default is NORMAL.
| Name | Type | Values | Description |
|---|---|---|---|
| frame type | enum | NORMAL | FlexRay frame type. |
:TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CRCset / query
Sets the FlexRay header CRC value for bus B1 trigger A. The factory default is a placeholder string value.
| Name | Type | Values | Description |
|---|---|---|---|
| crc | string | - | Header CRC value. |
:TRIGGER:A:BUS:B1:FLEXRAY:HEADER:CYCLECOUNTset / query
Sets the FlexRay header cycle count factory default value.
:TRIGGER:A:BUS:B1:FLEXRAY:HEADER:FRAMEIDset / query
Sets the FlexRay header frame ID for trigger bus B1.
:TRIGGER:A:BUS:B1:FLEXRAY:HEADER:INDBITSset / query
Sets the FlexRay header indicated bits field for bus B1. The factory default value is "XXXXX".
:TRIGGER:A:BUS:B1:FLEXRAY:HEADER:PAYLENGTHset / query
Sets the FlexRay header payload length used by trigger bus B1. The factory default value is "XXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| paylength | string | - | FlexRay header payload length. |
:TRIGGER:A:BUS:B1:I2C:ADDRESS:MODEset / query
Sets the I2C address mode used by bus trigger A, bus B1. The factory default is ADDR7.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ADDR7 | I2C address mode. |
:TRIGGER:A:BUS:B1:I2C:ADDRESS:TYPEset / query
Sets the I2C address type used for bus trigger A, bus B1. The factory default is USER.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | USER | I2C address type. |
:TRIGGER:A:BUS:B1:I2C:ADDRESS:VALUEset / query
Sets the I2C address value used for bus trigger conditions. The factory default is "XXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | I2C address value. |
:TRIGGER:A:BUS:B1:I2C:CONDITIONset / query
Sets the default I2C trigger condition for bus B1. The factory default value is START.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | START | I2C trigger condition. |
:TRIGGER:A:BUS:B1:I2C:DATA:DIRECTIONset / query
Sets the I2C data direction for bus trigger A, bus B1. Factory default is NOCARE.
| Name | Type | Values | Description |
|---|---|---|---|
| direction | enum | NOCARE | I2C data direction setting. |
:TRIGGER:A:BUS:B1:I2C:DATA:SIZEset / query
Sets the I2C bus trigger data size. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | Number of data bytes or bits used for the I2C trigger condition. |
:TRIGGER:A:BUS:B1:I2C:DATA:STARTset / query
Sets the I2C data start threshold for bus trigger A, bus B1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| start | real | - | I2C data start threshold. |
:TRIGGER:A:BUS:B1:I2C:DATA:VALUEset / query
Sets the I2C data value used by the trigger bus B1 configuration. The appendix shows its factory default as "XXXXXXXX".
:TRIGGER:A:BUS:B1:LIN:CONDITIONset / query
Sets the LIN bus trigger condition. The factory default is SYNCFIELD.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNCFIELD | LIN trigger condition. |
:TRIGGER:A:BUS:B1:LIN:DATA:HIVALUEset / query
Sets the LIN data high value used by the trigger bus B1 configuration. The factory default is "XXXXXXXX".
:TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIERset / query
Sets the LIN data qualifier for bus trigger A, bus B1. The factory default is EQUAL.
| Name | Type | Values | Description |
|---|---|---|---|
| qualifier | enum | EQUAL | LIN data qualifier setting. |
:TRIGGER:A:BUS:B1:LIN:DATA:SIZEset / query
Sets the LIN data size for trigger bus B1. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 0 | LIN data size. |
:TRIGGER:A:BUS:B1:LIN:DATA:VALUEset / query
Sets the LIN bus data value used for trigger A, bus B1. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | LIN data value. |
:TRIGGER:A:BUS:B1:LIN:ERRTYPEset / query
Sets the LIN error type for bus B1 trigger A. The factory default is SYNC.
:TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUEset / query
Sets the LIN identifier value used for trigger bus B1. The factory default is "XXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | LIN identifier value. |
:TRIGGER:A:BUS:B1:PARALLEL:VALUEset / query
Sets the parallel bus value pattern for trigger A, bus B1. The factory default is a 16-character quoted pattern string.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Parallel bus value pattern. |
:TRIGGER:A:BUS:B1:RS232C:CONDITIONset / query
Sets the RS232C bus trigger condition for bus B1. Factory default is TXSTART.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | TXSTART | RS232C trigger condition. |
:TRIGGER:A:BUS:B1:RS232C:RX:DATA:SIZEset / query
Sets the received RS232C data size used in bus trigger settings. The factory default value is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 0 | Number of data units to match. |
:TRIGGER:A:BUS:B1:RS232C:RX:DATA:VALUEset / query
Sets the RS232C receive data value for bus trigger A, bus B1. The factory default is shown as a quoted string placeholder.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Receive data value. |
:TRIGGER:A:BUS:B1:RS232C:TX:DATA:SIZEset / query
Sets the size of the RS232C TX data field for trigger A bus B1. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 | Specifies the TX data size. |
:TRIGGER:A:BUS:B1:RS232C:TX:DATA:VALUEset / query
Sets the RS232C transmit data value used for trigger A bus B1. The factory default is an 8-character quoted string placeholder.
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Transmit data value. |
:TRIGGER:A:BUS:B1:SPI:CONDITIONset / query
Sets the SPI trigger condition for bus B1. Factory default is SS.
:TRIGGER:A:BUS:B1:SPI:DATA:IN:VALUEset / query
Sets the SPI trigger data input value for bus B1. The factory default is "XXXXXXXX".
:TRIGGER:A:BUS:B1:SPI:DATA:OUT:VALUEset / query
Sets the SPI bus B1 output data value used for trigger setup. The factory default value is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | Output data value for the SPI trigger condition. |
:TRIGGER:A:BUS:B1:SPI:DATA:SIZEset / query
Sets the SPI data size used for trigger A bus B1. The factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | - | SPI data size. |
:TRIGGER:A:BUS:B1:SPI:DATA:STARTset / query
Factory default value for the SPI data start setting in trigger bus B1.
:TRIGGER:A:BUS:B1:USB:ADDRESS:HIVALUEset / query
Sets the high-value pattern used for USB address triggering. The factory default is "XXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| hivalue | string | - | High-value pattern for the USB address trigger. |
:TRIGGER:A:BUS:B1:USB:ADDRESS:VALUEset / query
Sets the USB trigger bus address value used in bus trigger setup. The factory default is "XXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | USB address value. |
:TRIGGER:A:BUS:B1:USB:CONDITIONset / query
Sets the USB bus trigger condition for bus B1. The factory default is SYNC.
| Name | Type | Values | Description |
|---|---|---|---|
| condition | enum | SYNC | USB trigger condition. |
:TRIGGER:A:BUS:B1:USB:DATA:HIVALUEset / query
Sets the high value pattern used for USB data trigger matching. The factory default is "XXXXXXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | High value pattern for USB data matching. |
:TRIGGER:A:BUS:B1:USB:DATA:OFFSETset / query
Sets the USB data offset for trigger bus B1. The factory default is -1.
| Name | Type | Values | Description |
|---|---|---|---|
| offset | integer | -1 | USB data offset. |
:TRIGGER:A:BUS:B1:USB:DATA:SIZEset / query
Sets the USB data size for trigger bus B1. Factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| size | integer | 1 - 1 | USB data size. |
:TRIGGER:A:BUS:B1:USB:DATA:TYPEset / query
Sets the USB trigger data type for bus B1. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ANY | USB data type. |
:TRIGGER:A:BUS:B1:USB:DATA:VALUEset / query
Sets the USB trigger data value used for Bus B1 trigger qualification. The factory default is "XXXXXXXX".
:TRIGGER:A:BUS:B1:USB:ENDPOINT:VALUEset / query
Sets the USB endpoint value used by trigger A bus B1 USB trigger setup. The factory default is "XXXX".
| Name | Type | Values | Description |
|---|---|---|---|
| value | string | - | USB endpoint value. |
:TRIGGER:A:BUS:B1:USB:ERRTYPEset / query
Sets or displays the USB error type for bus trigger B1. The factory default is PID.
:TRIGGER:A:BUS:B1:USB:HANDSHAKETYPEset / query
Sets the USB handshake type used for bus trigger B1. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| handshake type | enum | ANY | USB handshake type to match for the trigger. |
:TRIGGER:A:BUS:B1:USB:QUALIFIERset / query
Sets the USB trigger qualifier for bus B1. The factory default is EQUAL.
:TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBERset / query
Sets the USB SOF frame number trigger value. The factory default is "XXXXXXXXXXX".
:TRIGGER:A:BUS:B1:USB:SPECIALTYPEset / query
Sets the USB special type for trigger A bus B1. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| specialtype | enum | ANY | Selects the USB special type. |
:TRIGGER:A:BUS:B1:USB:TOKENTYPEset / query
Sets the USB token type used for bus trigger qualification. The factory default is ANY.
| Name | Type | Values | Description |
|---|---|---|---|
| tokentype | enum | ANY | USB token type setting. |
:TRIGGER:A:BUS:B2:CAN:FD:BRSBUTset / query
Sets the default value for the CAN FD BRSBUT trigger field. The factory default is X.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | X | BRSBUT setting. |
:TRIGGER:A:BUS:B<x>:CAN:DATa:OFFSetset / query
Sets the CAN data offset for bus trigger A bus B<x>.
:TRIGGER:A:BUS:B<x>:CAN:FD:BRSBITset / query
Sets the CAN FD BRS bit trigger condition default value. The factory default for this setting is X.
:TRIGGER:A:BUS:B<x>:CAN:FD:ESIBITset / query
Sets the factory default bit selection for CAN FD stuff-bit insertion/extraction (ESI bit).
:TRIGGER:A:BUS:SOURCEset / query
Sets the source used for A trigger bus triggering. The factory default is B1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | B1 | Trigger bus source. |
:TRIGGER:A:EDGE:COUPLINGset / query
Sets the trigger A edge coupling mode. The factory default is DC.
| Name | Type | Values | Description |
|---|---|---|---|
| coupling | enum | DC | Trigger edge coupling mode. |
:TRIGGER:A:EDGE:SLOPEset / query
Sets the edge trigger slope. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISE | Trigger edge slope. |
:TRIGGER:A:EDGE:SOURCEset / query
Sets the source used for trigger A edge triggering. The factory default for this setting is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Trigger source for edge triggering. |
:TRIGGER:A:HOLDOFF:TIMEset / query
Sets the trigger A holdoff time. The factory default value is 20.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Holdoff time setting. |
:TRIGGER:A:LEVELset / query
Sets the trigger level. The default level is 0.0E+0 for the main trigger level, and per-channel/per-digital defaults are listed separately.
:TRIGGER:A:LEVEL:CH1set / query
Sets the trigger A level for channel 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | Trigger level for channel 1. |
:TRIGGER:A:LEVEL:D10set / query
Sets the trigger level for digital channel D10. The factory default value is 1.4000.
| Name | Type | Values | Description |
|---|---|---|---|
| D10 | real | - | Trigger level for digital channel D10. |
:TRIGGER:A:LOGIC:CLASSset / query
Sets the logic trigger class. The factory default is LOGIC.
:TRIGGER:A:LOGIC:FUNCTIONset / query
Sets the logic function used for trigger A logic triggering. The factory default is AND.
| Name | Type | Values | Description |
|---|---|---|---|
| function | enum | AND | Logic function selection. |
:TRIGGER:A:LOGIC:INPUT:CH1set / query
Sets the trigger A logic input assignment for channel 1. The factory default is X.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | X | Logic input assignment for CH1. |
:TRIGGER:A:LOGIC:INPUT:CLOCK:EDGEset / query
Sets the edge used for the A trigger logic clock input. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| edge | enum | RISE | Edge selection for the clock input. |
:TRIGGER:A:LOGIC:INPUT:CLOCK:SOURCEset / query
Sets the source for the A trigger logic clock input. The factory default is NONE.
:TRIGGER:A:LOGIC:INPUT:D10set / query
Sets the default logic input assignment for trigger A digital input D10. The factory default is X.
:TRIGGER:A:LOGIC:PATTERN:DELTATIMEset / query
Sets the delta time used for the A logic pattern trigger. The factory default value is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| deltatime | real | s | Delta time for the logic pattern trigger. |
:TRIGGER:A:LOGIC:PATTERN:WHENset / query
Sets the logic pattern trigger "when" condition. The factory default value is TRUE.
:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMITset / query
Sets the lower limit for the trigger pattern when condition. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | s | Lower time limit used by the pattern WHEN condition. |
:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMITset / query
Sets the default value for the logic pattern 'MORELIMIT' trigger parameter. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| limit | real | 8.0000E-9 - 8.0000E-9 | Time limit used for the MORELIMIT condition. |
:TRIGGER:A:LOGIC:THRESHOLD:CH1set / query
Sets the trigger A logic threshold for channel 1. The factory default value shown is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Threshold level for CH1. |
:TRIGGER:A:LOGIC:THRESHOLD:D10set / query
Sets the trigger logic threshold for digital line D10. The factory default value is 1.4000.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Threshold level for digital input D10. |
:TRIGGER:A:LOWERTHRESHOLD:CH1set / query
Sets the lower threshold for analog channel 1 trigger level. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | integer | - | Analog channel number. |
:TRIGGER:A:LOWERTHRESHOLD:D10set / query
Sets the lower threshold for digital channel D10 in trigger A. The factory default is 1.4000.
:TRIGGER:A:MODEset / query
Sets the trigger A mode. The factory default is AUTO.
:TRIGGER:A:PULSE:CLASSset / query
Selects the pulse trigger class for trigger A. The factory default is WIDTH.
:TRIGGER:A:PULSEWIDTH:HIGHLIMITset / query
Sets the upper limit for pulse-width trigger qualification. The factory default is 12.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| highlimit | real | s | Upper limit for the pulse-width trigger. |
:TRIGGER:A:PULSEWIDTH:LOWLIMITset / query
Sets the lower limit for pulse-width triggering on trigger A. The factory default shown is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| lowlimit | real | s | Lower pulse-width limit for trigger A. |
:TRIGGER:A:PULSEWIDTH:POLARITYset / query
Sets the factory default polarity for the A pulse-width trigger. The default value is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | Sets the pulse-width trigger polarity. |
:TRIGGER:A:PULSEWIDTH:WHENset / query
Sets the pulse width trigger condition for the A trigger source. The factory default for this setting is LESSTHAN.
:TRIGGER:A:PULSEWIDTH:WIDTHset / query
Sets the trigger A pulse-width width default value. The factory default shown is 8.0000E-9.
:TRIGGER:A:RUNT:POLARITYset / query
Sets the polarity for Runt trigger A. The factory default is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | NEGATIVE | Selects the polarity used for the Runt trigger. |
:TRIGGER:A:RUNT:WHENset / query
Sets the default trigger polarity/condition for runt triggering. The factory default for this setting is OCCURS.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | OCCURS | Runt trigger condition. |
:TRIGGER:A:RUNT:WIDTHset / query
Sets the A trigger runt width threshold. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Runt width threshold. |
:TRIGGER:A:SETHOLD:CLOCK:EDGEset / query
Sets the default edge setting for the A holdoff clock in Set/Hold trigger mode. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| EDGE | enum | RISE | Edge polarity used for the A holdoff clock. |
:TRIGGER:A:SETHOLD:CLOCK:SOURCEset / query
Sets the clock source used for the A hold/setup trigger. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Clock source. |
:TRIGGER:A:SETHOLD:CLOCK:THRESHOLDset / query
Sets the clock threshold used for set/hold triggering. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Clock threshold value. |
:TRIGGER:A:SETHOLD:DATA:SOURCEset / query
Sets the data source for the A hold trigger setup. The factory default is NONE.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | NONE | Data source for the set/hold trigger. |
:TRIGGER:A:SETHOLD:DATA:THRESHOLDset / query
Sets the data threshold used by the A set/reset hold trigger. The factory default is 9.91E+37.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Data threshold value. |
:TRIGGER:A:SETHOLD:HOLDTIMEset / query
Sets the hold time for the A trigger setup-and-hold condition. The factory default is 8.0000E-9 s.
| Name | Type | Values | Description |
|---|---|---|---|
| holdtime | real | s | Hold time value. |
:TRIGGER:A:SETHOLD:SETTIMEset / query
Sets the hold time for the A trigger set/hold state. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| holdtime | real | s | Hold time for the set/hold trigger state. |
:TRIGGER:A:SETHOLD:THRESHOLD:CH1set / query
Sets the set/hod trigger threshold for channel 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| CH1 | real | - | Threshold value for channel 1. |
:TRIGGER:A:SETHOLD:THRESHOLD:D10set / query
Sets the default threshold for digital input D10 in the A trigger set/hold configuration. This page lists its factory default value.
:TRIGGER:A:TIMEOUT:POLARITYset / query
Sets or shows the timeout trigger polarity. The factory default is STAYSHIGH.
:TRIGGER:A:TIMEOUT:TIMEset / query
Sets the timeout trigger time. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Timeout time value. |
:TRIGGER:A:TRANSITION:DELTATIMEset / query
Sets the delta-time value used by the A transition trigger. The factory default is 8.0000E-9.
| Name | Type | Values | Description |
|---|---|---|---|
| delta time | real | s | Delta-time setting for the transition trigger. |
:TRIGGER:A:TRANSITION:POLARITYset / query
Sets the trigger A transition polarity. The factory default is POSITIVE.
| Name | Type | Values | Description |
|---|---|---|---|
| polarity | enum | POSITIVE | Trigger transition polarity. |
:TRIGGER:A:TRANSITION:WHENset / query
Sets the transition trigger condition for A trigger. The factory default is SLOWER.
| Name | Type | Values | Description |
|---|---|---|---|
| when | enum | SLOWER | Transition condition selection. |
:TRIGGER:A:TYPEset / query
Sets the trigger A type. The factory default is EDGE.
:TRIGGER:A:UPPERTHRESHOLD:CH1set / query
Sets the upper threshold for CH1 in the A trigger system.
| Name | Type | Values | Description |
|---|---|---|---|
| CH1 | real | V | Upper threshold value for channel 1. |
:TRIGGER:B:BYset / query
Sets the trigger B-by mode. Factory default is TIME.
:TRIGGER:B:EDGE:COUPLINGset / query
Sets the edge trigger coupling for Trigger B. The factory default is DC.
| Name | Type | Values | Description |
|---|---|---|---|
| coupling | enum | DC | Trigger coupling mode. |
:TRIGGER:B:EDGE:SLOPEset / query
Sets the slope for the B edge trigger. The factory default is RISE.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISE | FALL | Selects the trigger edge slope. |
:TRIGGER:B:EDGE:SOURCEset / query
Sets the source for trigger B edge triggering. The factory default is CH1.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH1 | Trigger source for B edge triggering. |
:TRIGGER:B:EVENTS:COUNTset / query
Sets the number of B trigger events to count. Factory default is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| count | integer | 1 | Number of trigger events to count. |
:TRIGGER:B:LEVELset / query
Sets the B trigger level. The factory default is 0.0E+0.
:TRIGGER:B:LEVEL:CH1set / query
Sets the trigger level for channel 1 in trigger B. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | V | Trigger level for channel 1. |
:TRIGGER:B:LEVEL:D10set / query
Sets the default trigger B level for digital channel D10. The factory default value shown is 1.4000.
| Name | Type | Values | Description |
|---|---|---|---|
| level | real | - | Trigger level for D10. |
:TRIGGER:B:LOWERTHRESHOLD:CH1set / query
Sets the default lower threshold for the specified trigger B source. The factory defaults list 0.0E+0 for CH1-CH4 and 1.4000 for digital inputs.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | enum | CH1 | Trigger B lower threshold source channel. |
:TRIGGER:B:LOWERTHRESHOLD:D10set / query
Sets the factory-default lower threshold for digital channel D10 in trigger B. The default value listed for this item is 1.4000.
:TRIGGER:B:STATEset / query
Sets the state of trigger B. The factory default is 0.
:TRIGGER:B:TIMEset / query
Sets the trigger B time position/default value shown in the factory defaults table.
:TRIGGER:B:TYPEset / query
Sets the trigger B type. The factory default is EDGE.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | EDGE | Trigger B type. |
:TRIGger:A:EDGE:SLOpeset / query
Specifies the slope direction for edge trigger A. The example shows FALL for a falling edge.
| Name | Type | Values | Description |
|---|---|---|---|
| slope | enum | RISe | FALL | Edge direction for the trigger. |
:TRIGger:A:EDGE:SLOpe FALL
:TRIGger:A:EDGE:SOUrceset / query
Specifies the source waveform used for the edge trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | CH2 | Specifies the trigger source waveform. |
:TRIGger:A:EDGE:SOUrce CH2
:TRIGger:A:LOWerthreshold:CH2set / query
Specifies the CH2 waveform threshold level for trigger A. The example sets it to 1.4 volts.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | V | Threshold level for CH2. |
:TRIGger:A:LOWerthreshold:CH2 1.4
:TRIGger:A:TYPeset / query
Specifies the trigger type for trigger A. In the example, EDGE selects an edge trigger.
| Name | Type | Values | Description |
|---|---|---|---|
| TYPE | enum | EDGE | RUNT | Trigger type to use. |
:TRIGger:A:TYPe EDGE
:TSTamptable:ADDNewset / query
Adds a new History time stamp results table to the scope application.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the History time stamp results table name. |
TSTAMPTABLE:ADDNEW "TABLE1" adds a new table view by the name TABLE1.
:TSTamptable:DELETEset / query
Deletes the requested History time stamp results table from the scope application.
| Name | Type | Values | Description |
|---|---|---|---|
| QString | string | - | Specifies the History time stamp results table name. |
TSTAMPTABLE:DELETE "TABLE1" deletes History time stamp results table TABLE1 from the view.
:TSTamptable:LIST?query
Queries the list of History time stamp results tables that have been added.
string - Returns the list of History time stamp results tables that have been added.
:UNDOset / query
Reverts the instrument settings to a state before the previous command or user interface action.
UNDO
:UNLockset / query
Unlocks the front panel controls only. If the instrument is in the Remote With Lockout State (RWLS), the command has no effect.
| Name | Type | Values | Description |
|---|---|---|---|
| ALL | enum | ALL | Specifies that all front panel buttons and knobs are unlocked. |
UNLOCK ALL unlocks all front panel buttons and knobs.
:USBDevice:CONFigureset / query
Configures the rear USB port to be disabled or enabled as a USBTMC device. Use caution when changing this setting over USBTMC, since disabling USBTMC communication will stop the interface.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | DISabled | USBTmc | Selects whether the rear USB port is disabled or enabled as a USBTMC device. |
USBDEVICE:CONFIGURE DISABLED will disable the rear USB port. USBDEVICE:CONFIGURE? might return USBDEVICE:CONFIGURE USBTMC indicating the USB port is enabled.
Queries the configuration of the rear USB port. It reports whether the port is disabled or enabled as a USBTmc device.
enum - Returns the current USB device configuration state.
USBDEVICE:CONFIGURE? might return USBDEVICE:CONFIGURE USBTMC indicating the USB port is enabled.
:VERBoseset / query
Sets or queries the Verbose state that controls the length of keywords on query responses. Keywords can be both headers and arguments.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Sets or queries the Verbose state. |
VERBOSE ON sets the Verbose state to true and return the full length keyword for the applicable setting queries.
:VERBose?query
Sets or queries the Verbose state, which controls the length of keywords on query responses. Keywords can be both headers and arguments.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | <NR1> | OFF | ON | Controls whether Verbose is disabled or enabled. |
enum - Returns minimum-length keywords when Verbose is disabled, and full-length keywords when Verbose is enabled. A 0 returns minimum-length keywords; any other value returns full-length keywords.
VERBOSE ON
:VERBOSEset / query
Sets the verbose mode factory default value. The factory default shown is 1.
:VERTical:DESKew:FROM:CUSTOMPROPAgationset / query
Sets or queries a target delay to use for deskew when the propagation delay of the target probe cannot be detected automatically.
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | s | Target (FROM) delay for deskew. |
real (s) - Returns the custom target delay.
VERTICAL:DESKEW:FROM:CUSTOMPROPAGATION 0.25e-9 VERTICAL:DESKEW:FROM:CUSTOMPROPAGATION?
Sets or queries a target delay used when the propagation delay of the target probe for deskew cannot be detected automatically.
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | s | Target (FROM) delay specified for deskew. |
real (s) - Returns the custom delay value.
VERTICAL:DESKEW:FROM:CUSTOMPROPAGATION 0.25e-9 VERTICAL:DESKEW:FROM:CUSTOMPROPAGATION?
:VERTical:DESKew:FROM:SOUrceset / query
Sets or queries the source channel for performing channel-to-channel deskew adjustment. Sources can be any of the analog channels.
| Name | Type | Values | Description |
|---|---|---|---|
| channel | channel_list | - | Specifies an analog channel as the source. |
channel_list - Returns the source channel for deskew adjustment.
VERTICAL:DESKEW:FROM:SOURCE CH1 VERTICAL:DESKEW:FROM:SOURCE?
Sets or queries the source channel used for channel-to-channel deskew adjustment. Sources can be any analog channel.
channel_list - Returns the source channel used for performing channel-to-channel deskew adjustment.
:VERTical:DESKew:STATICset / query
Executes static deskew using the current deskew settings.
:VERTical:DESKew:TO:CUSTOMPROPAgationset / query
Sets or queries a user-specified target propagation delay for deskew when the target probe's propagation delay cannot be detected automatically.
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | - | Target (TO) delay specified by the user. |
real - Returns the custom propagation delay setting.
VERTICAL:DESKEW:TO:CUSTOMPROPAGATION 0.25e-9 VERTICAL:DESKEW:TO:CUSTOMPROPAGATION?
Sets or queries a user-specified target delay for deskew when the TO probe propagation delay cannot be detected automatically.
| Name | Type | Values | Description |
|---|---|---|---|
| delay | real | s | Target (TO) delay specified by the user. |
real (s) - Returns the current custom propagation delay setting.
VERTICAL:DESKEW:TO:CUSTOMPROPAGATION 0.25e-9 VERTICAL:DESKEW:TO:CUSTOMPROPAGATION?
:VERTical:DESKew:TO:SOUrceset / query
Sets or queries the target channel for channel-to-channel deskew adjustment. Target sources can be any live analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| source | channel_list | - | Target analog channel to use for deskew adjustment. |
channel_list - Returns the current target channel for deskew adjustment.
Sets or queries the target channel used for channel-to-channel deskew adjustment. Target sources can be any live analog channel.
enum - Returns the current target channel for deskew adjustment.
:VISual:AREA<x>:ASPEctratioset / query
Sets or queries whether the aspect ratio of the specified Visual Trigger area is locked.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| state | enum | ON | OFF | Locks or unlocks the aspect ratio of the specified Visual Trigger area. |
| value | integer | - | An integer number; 1 locks the aspect ratio, and any other value unlocks it. |
enum - Returns whether the aspect ratio of the specified Visual Trigger area is locked.
VISual:AREA6:ASPEctratio ON VISual:AREA2:ASPEctratio?
Sets or queries whether the aspect ratio of the specified Visual Trigger area is locked.
| Name | Type | Values | Description |
|---|---|---|---|
| area<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| mode | enum | ON | OFF | <NR1> | Locks or unlocks the aspect ratio of the specified Visual Trigger area; 1 locks it, any other value unlocks it. |
enum - Returns whether the aspect ratio of the specified Visual Trigger area is locked.
VISual:AREA6:ASPEctratio ON locks the aspect ratio of area 6. VISual:AREA2:ASPEctratio? might return VISual:AREA2:ASPEctratio OFF, indicating that the aspect ratio of area 2 is not locked.
:VISual:AREA<x>:FLIP:HORizontalset / query
Flips the specified Visual Trigger area horizontally around its center point.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
VISual:AREA1:FLIP:HORizontal horizontally flips area 1.
:VISual:AREA<x>:FLIP:VERTicalset / query
Flips the specified Visual Trigger area vertically around its center point.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
VISual:AREA8:FLIP:VERTical vertically flips area 8.
:VISual:AREA<x>:HEIGhtset / query
Sets or queries the height of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| height | real | amplitude | Specifies the height of the Visual Trigger area in amplitude. |
real (amplitude) - Returns the height of the specified Visual Trigger area.
VISual:AREA51:HEIGht 3.5 sets the height of area 51 to 3.5 (volts or Amps). VISual:AREA4:HEIGht? might return VISual:AREA4:HEIGht 15, indicating that the height of area 4 is 15.
Sets or queries the height of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| height | real | - | Specifies the height of the Visual Trigger area in amplitude. |
real - Returns the height of the specified Visual Trigger area.
VISual:AREA51:HEIGht 3.5 sets the height of area 51 to 3.5 (volts or Amps). VISual:AREA4:HEIGht? might return VISual:AREA4:HEIGht 15, indicating that the height of area 4 is 15.
:VISual:AREA<x>:HITTypeset / query
Sets or queries the area hit logic true condition for the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| mode | enum | IN | OUT | DONTcare | Selects the area hit logic true condition. |
Sets or queries the area hit logic true condition for the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| mode | enum | IN | OUT | DONTcare | Sets the true-condition logic for the specified Visual Trigger area. |
enum - Returns the area hit logic true condition for the specified Visual Trigger area.
:VISual:AREA<x>:RESETset / query
Sets the specified Visual Trigger area shape to a default-sized triangle.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
VISual:AREA2:RESET changes area 2 to a default triangle shape.
:VISual:AREA<x>:ROTAtionset / query
Sets or queries the rotation angle of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| <NR3> | real | 0 - 360 | Specifies the rotation angle of the Visual Trigger area, in positive degrees from 0 to 360. |
real (degrees) - Returns the rotation angle of the specified Visual Trigger area in degrees.
VISual:AREA2:ROTAtion 45 rotates Visual Trigger area 2 by 45 degrees. VISual:AREA1:ROTAtion? might return VISual:AREA1:ROTAtion -60, indicating that area 4 rotation position is minus 60 degrees.
Sets or queries the rotation angle of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| angle | real | 0 - 360 | Rotation angle of the Visual Trigger area, in positive degrees from 0 to 360. |
real (degrees) - Returns the rotation angle of the specified Visual Trigger area, in degrees.
VISual:AREA2:ROTAtion 45 rotates Visual Trigger area 2 by 45 degrees. VISual:AREA1:ROTAtion? might return VISual:AREA1:ROTAtion -60, indicating that area 4 rotation position is minus 60 degrees.
:VISual:AREA<x>:SHAPEset / query
Sets or queries the current shape of a Visual Trigger area. If the area does not exist, setting a shape creates a new area of that shape.
| Name | Type | Values | Description |
|---|---|---|---|
| shape | enum | TRIAngle | RECTangle | TRAPezoid | HEXAgon | Shape to assign to the specified Visual Trigger area. |
enum - Returns the current area shape; CUSTom indicates a custom-created shape or that one or more vertices of a standard shape have been changed.
VISual:AREA1:SHAPE Hexagon VISual:AREA2:SHAPE?
Sets or queries the current shape of the specified Visual Trigger area. If the area does not exist, the instrument creates a new area with the requested shape.
| Name | Type | Values | Description |
|---|---|---|---|
| area<x> | integer | - | Integer number of a Visual Trigger area. |
enum - Returns the current area shape; CUSTom indicates a custom-created shape or that vertices of a standard shape have been changed.
VISual:AREA1:SHAPE Hexagon VISual:AREA2:SHAPE?
:VISual:AREA<x>:SOUrceset / query
Sets or queries the signal source for the specified Visual Trigger area. The source can only be an analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| CH<x> | channel_list | - | Sets the source channel number for the specified area. The channel number is specified by <x>. |
VISual:AREA1:SOUrce CH3 sets the source channel number for area 1 to Channel 3.
Sets or queries the signal source for the specified Visual Trigger area. The source can only be an analog channel.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| CH<x> | - | - | Sets the source channel number for the specified area. The channel number is specified by <x>. |
VISual:AREA1:SOUrce CH3 sets the source channel number for area 1 to Channel 3.
:VISual:AREA<x>:VERTICESset / query
Sets or queries the X and Y vertex coordinate values for all vertices of the specified Visual Trigger area. Vertex values must be set in pairs, with a minimum of three vertex pairs required to create an area.
| Name | Type | Values | Description |
|---|---|---|---|
| area<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| vertices | real | - | X, Y coordinate pairs for each vertex in the area; the first value is X (time) and the second value is Y (amplitude). |
real - Returns the X and Y vertex coordinate values for all vertices of the specified Visual Trigger area.
VISual:AREA3:VERTICES "400E-9,1,400E-9,0.5,600E-9,0.5,600E-9,1" VISual:AREA3:VERTICES? might return VISual:AREA3:VERTICES "171.1E-9,-141.7E-3,321.1E-9,-141.7E-3,283.6E-9,1.708, 208.6E-9,1.708"
Sets or queries the X and Y vertex coordinate values for all vertices of the specified Visual Trigger area. Vertex values must be set in pairs, with a minimum of three vertex pairs to create an area.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
returns - Returns the X and Y vertex coordinate values for all vertices of the specified Visual Trigger area.
VISual:AREA3:VERTICES? might return VISual:AREA3:VERTICES "171.1E-9,-141.7E-3,321.1E-9,-141.7E-3,283.6E-9,1.708, 208.6E-9,1.708", indicating that area 3 is defined as a trapezoid that is 150 ns wide by 1.85 V high.
:VISual:AREA<x>:WIDTHset / query
Sets or queries the width of the specified Visual Trigger area. The width is specified in seconds.
| Name | Type | Values | Description |
|---|---|---|---|
| width | real | s | Width of the Visual Trigger area. |
VISual:AREA5:WIDTH 0.0000045 VISual:AREA3:WIDTH? might return VISual:AREA3:WIDTH 0.000016
Sets or queries the width of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| width | real | s | Specifies the width of the Visual Trigger area in seconds. |
real (s) - Returns the width of the specified Visual Trigger area in seconds.
VISual:AREA5:WIDTH 0.0000045 VISual:AREA3:WIDTH?
:VISual:AREA<x>:XPOSitionset / query
Sets or queries the horizontal position of the center of the specified Visual Trigger area. The position is specified in seconds relative to the trigger point.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| position | real | s | Horizontal position of the center of the Visual Trigger area, in seconds. |
VISual:AREA1:XPOSition –6.9e-6 VISual:AREA3:XPOSition?
Sets or queries the horizontal center position of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| position | real | s | Specifies the horizontal position of the center of the Visual Trigger area, in seconds. |
real (s) - Returns the horizontal position of the center of the specified Visual Trigger area, in seconds.
VISual:AREA1:XPOSition –6.9e-6 VISual:AREA3:XPOSition?
:VISual:AREA<x>:YPOSitionset / query
Sets or queries the vertical (Y-axis) center position of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Specifies the integer number of a Visual Trigger area. |
| position | real | V | Specifies the vertical position of the center of the Visual Trigger area, in amplitude (volts, amps). |
Sets or queries the vertical (Y-axis) center position of the specified Visual Trigger area.
| Name | Type | Values | Description |
|---|---|---|---|
| AREA<x> | integer | - | Specifies the integer number of a Visual Trigger area. |
| position | real | amplitude (volts, amps) | Specifies the vertical position of the center of the Visual Trigger area. |
real (amplitude (volts, amps)) - Returns the vertical position of the center of the specified Visual Trigger area.
VISual:AREA1:YPOSition 0.5 sets the vertical center of area 1 to be 500 mV. VISual:AREA3:YPOSition? might return VISual:AREA3:YPOSition 2, indicating that the vertical center of area 3 is 2 volts.
:VISual:DELETEALLset / query
Deletes all Visual Trigger areas.
VISUAL:DELETEALL deletes all Visual Trigger areas.
:VISual:ENAbleset / query
Sets or queries the status of the Visual Trigger mode. A nonzero integer enables the mode; 0 turns it off.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables Visual Trigger mode. |
| value | integer | 0 | Integer value where 0 turns off Visual Trigger mode and any other value enables it. |
enum - Returns the present Visual Trigger mode status.
VISual:ENAble ON VISual:ENAble? might return VISual:ENAble OFF, indicating that Visual Trigger mode is not enabled.
:VISual:ENAble?query
Sets or queries the status of the Visual Trigger mode. 0 turns the mode off; any other integer value enables it.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or disables the Visual Trigger mode. |
| value | integer | - | Integer number controlling the Visual Trigger mode; 0 turns it off and any other value enables it. |
enum - Returns the present status of the Visual Trigger mode.
VISual:ENAble ON enables the Visual Trigger function. VISual:ENAble? might return VISual:ENAble OFF, indicating that Visual Trigger mode is not enabled.
:VISual:EQUationset / query
Sets or queries the Visual Trigger area combination logic equation.
| Name | Type | Values | Description |
|---|---|---|---|
| equation | string | - | Defines the Visual Trigger area combination logic equation. |
string - Returns the current Visual Trigger area combination logic equation.
VISual:EQUation "(A1 & A2) | A3" sets the combined area logic such that both areas 1 and 2 must be true, or VISual:EQUation? might return VISual:EQUation "A1 & A2 & A3 & A4", indicating that the area combination
:VISual:EQUation?query
Sets or queries the Visual Trigger area combination logic equation.
string - Returns the current Visual Trigger area combination logic equation.
:VISual:SHOWAReasset / query
Sets or queries whether all Visual Trigger areas are shown. A value of ON shows them, OFF hides them, and 0 hides them while any other integer shows them.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Shows or hides all Visual Trigger areas. |
| value | integer | 0 | Integer control value; 0 hides all Visual Trigger areas and any other value shows all Visual Trigger areas. |
VISual:SHOWAReas OFF hides all Visual Trigger areas. VISual:SHOWAReas? might return VISual:SHOWAReas ON, indicating that Visual Trigger areas are displayed on the screen.
:VISual:SHOWAReas?query
Sets or queries whether all Visual Trigger areas are shown. A value of 0 hides all Visual Trigger areas; any other value shows them.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Shows or hides all Visual Trigger areas. |
| value | integer | 0 | Integer value controlling whether all Visual Trigger areas are shown; 0 hides them and any other value shows them. |
enum - Returns the current Visual Trigger area display state.
VISual:SHOWAReas OFF hides all Visual Trigger areas. VISual:SHOWAReas? might return VISual:SHOWAReas ON, indicating that Visual Trigger areas are displayed on the screen.
:VISual:SHOWCRiteriaset / query
Sets or queries display of the area names and hit criteria for all visual trigger areas.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | Enables or hides the area name and hit criteria labels for all Visual Trigger areas. |
| value | integer | 0 | 0 hides all Visual Trigger areas; any other value enables displaying them. |
VISual:SHOWCRiteria OFF hides the name and hit criteria labels of all Visual Trigger areas. VISual:SHOWCRiteria? might return VISual:SHOWCRiteria ON, indicating that the name and hit criteria labels of all Visual Trigger areas are displayed.
Sets or queries display of the area names and hit criteria for all visual trigger areas.
enum - Returns whether the name and hit criteria labels of all Visual Trigger areas are displayed or hidden.
:VISual:SHOWEQuationset / query
Shows or hides the Visual Trigger area combination logic equation.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | <NR1> | Controls whether the Visual Trigger area combination logic equation is shown or hidden. |
Shows or hides the Visual Trigger area combination logic equation.
:VXI:ENAbleset / query
Sets or queries the state of the VXI-11 server used for command and control over an Ethernet connection.
| Name | Type | Values | Description |
|---|---|---|---|
| state | enum | ON | OFF | 1 | 0 | Enables or disables the VXI-11 server. |
enum - Returns the current state of the VXI-11 server.
VXI:ENAble ON enables the VXI-11 server. VXI:ENAble? might return VXI:ENAble OFF, indicating the VXI-11 server is disabled.
:VXI:ENAble?query
Sets or queries the state of the VXI-11 server used for command and control over an Ethernet connection.
enum - Returns the VXI-11 server state.
VXI:ENAble ON enables the VXI-11 server. VXI:ENAble? might return VXI:ENAble OFF, indicating the VXI-11 server is disabled.
:VXI:PORT:HIGHset / query
Sets or queries the higher end of the port range for the VXI-11 server.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Integer value for the higher end of the VXI-11 server port range. |
:VXI:PORT:HIGH?query
Sets or queries the higher end of the port range for the VXI-11 server.
integer - Returns the current higher end of the VXI-11 server port range.
:VXI:PORT:LOWset / query
Sets or queries the lower end of the port range for the VXI-11 server.
| Name | Type | Values | Description |
|---|---|---|---|
| port number | integer | 0 - 65535 | Low end of the TCPIP port range for the VXI-11 server connection. |
string - Might return the current VXI-11 low port setting in the form VXI:PORT:LOW <port number>.
VXI:PORT:LOW 7000 sets the VXI-11 low port number to 7010. VXI:PORT:LOW? might return VXI:PORT:LOW 7000, indicating that the port number is 7000.
:VXI:PORT:LOW?query
Sets or queries the lower end of the port range for the VXI-11 server.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Low end of the TCPIP port range for the VXI-11 server connection. |
integer - Returns the VXI-11 low port number.
VXI:PORT:LOW 7000 VXI:PORT:LOW?
:WAVFrm?query
Provides the Tektronix standard waveform query, returning the waveform preamble followed by waveform data for the source specified by :DATa:SOUrce, using the current :DATa encoding and width settings.
string - Returns the waveform preamble followed by the waveform data for the selected source.
WAVFRM? might return the waveform data as WFMOUTPRE:BIT_NR8;BN_FMT RI;BYT_NR 1;BYT_OR MSB;ENCDG ASC;NR_PT 500;PT_FMTY;PT_ORDER LINEAR;PT_OFF 0;XINCR 400.0000E-12;XZERO0.0000;XUNIT "s";YMULT 4.0000E-3; YOFF 0.0000;YZERO0.0000;YUNIT "V"; WFID "Ch1,DC coupling, 100.0mV/div,200.0ns/div, 5000 points,Sampl mode".
:WFMOutpre:ASC_Fmt?query
Returns the ASCII data transfer format used by the instrument for the selected waveform source. The format is determined by the data source type, so no setter form is provided.
enum - Format used for ASCII waveform data transfer.
:WFMOutpre?query
Queries the waveform formatting data for the waveform specified by :DATa:SOUrce. The preamble includes formatting components and interpretation components derived from the selected source waveform.
string - Returns the waveform preamble/formatting data string for the selected waveform.
:WFMOutpre:BIT_Nrset / query
Sets or queries the number of bits per waveform point that outgoing waveforms contain, as specified by DATa:SOUrce. The setting is only meaningful when WFMOutpre:ENCdg is BIN and WFMOutpre:BN_Fmt is RI or RP.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 8 - 16 | Number of bits per data point; can be 8 or 16. |
integer - Returns the number of bits per waveform point used by outgoing RI or RP binary format data.
WFMOUTPRE:BIT_NR 16 WFMOUTPRE:BIT_NR?
:WFMOutpre:BIT_Nr?query
Sets or queries the number of bits per waveform point used for outgoing waveform data specified by DATa:SOUrce. The setting is only meaningful when WFMOutpre:ENCdg is BIN and WFMOutpre:BN_Fmt is RI or RP.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 8 - 16 | Number of bits per data point. |
WFMOUTPRE:BIT_NR 16 WFMOUTPRE:BIT_NR? might return WFMOUTPRE:BIT_NR 8
:WFMOutpre:BN_Fmtset / query
Sets or queries the format of binary data for outgoing waveforms specified by the DATa:SOUrce command.
:WFMOutpre:BN_Fmt?query
Sets or queries the format of binary data for outgoing waveforms specified by the DATa:SOUrce command.
:WFMOutpre:BYT_Nrset / query
Sets or queries the binary field data width in bytes per waveform data point for the waveform specified by DATa:SOUrce. The value is constrained by the underlying waveform data and is only meaningful when WFMOutpre:ENCdg is BIN and WFMOutpre:BN_Fmt is RI or RP.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | 1 - 8 | Number of bytes per data point; allowed values are 1, 2, or 8. |
integer - Returns the number of bytes per outgoing waveform data point.
WFMOUTPRE:BYT_NR 1 WFMOUTPRE:BYT_NR?
:WFMOutpre:BYT_Nr?query
Sets or queries the binary field data width in bytes per point for the waveform specified by DATa:SOUrce. It is only meaningful when WFMOutpre:ENCdg is set to BIN and WFMOutpre:BN_Fmt is RI or RP.
integer - Returns the number of bytes per data point for the outgoing waveform data.
WFMOUTPRE:BYT_NR 1 WFMOUTPRE:BYT_NR? might return WFMOUTPRE:BYT_NR 2, indicating that there are 2 bytes per outgoing waveform data point.
:WFMOutpre:BYT_Orset / query
Sets or queries which byte of binary waveform data is transmitted first during a waveform data transfer when data points require more than one byte. This setting is only meaningful when WFMOutpre:ENCdg is set to BIN.
:WFMOutpre:BYT_Or?query
Sets or queries which outgoing waveform byte is transmitted first. LSB means the least significant byte is transmitted first; MSB means the most significant byte is transmitted first.
enum - Returns the outgoing waveform byte-order setting.
WFMOUTPRE:BYT_OR MSB WFMOUTPRE:BYT_OR?
Returns the center frequency of the outgoing waveform. It is the precise frequency at the center of the display of the frequency-domain graticule, often used as a carrier frequency.
real (Hz) - Returns the center frequency of the outgoing waveform.
:WFMOutpre:DOMain?query
Returns the domain of the outgoing waveform. The domain is either TIMe or FREQuency; TIMe indicates integer information and FREQuency indicates floating point information.
enum - The outgoing waveform domain.
:WFMOutpre:ENCdgset / query
Sets or queries the type of encoding for outgoing waveforms. ASCII format sends waveform data as <NR1> or <NR3> numbers; binary format is further specified by related waveform transfer commands.
| Name | Type | Values | Description |
|---|---|---|---|
| encoding | enum | ASCii | BINary | Specifies the encoding type for outgoing waveforms. |
enum - Returns the current encoding type for outgoing waveforms.
WFMOUTPRE:ENCDG ASCii WFMOUTPRE:ENCDG? might return WFMOUTPRE:ENCDG BINary, indicating that outgoing waveform data will be sent in binary format.
:WFMOutpre:ENCdg?query
Sets or queries the type of encoding for outgoing waveforms.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | ASCii | BINary | Specifies the encoding for outgoing waveform data. |
enum - Returns the encoding type for outgoing waveforms.
WFMOUTPRE:ENCDG ASCii WFMOUTPRE:ENCDG?
:WFMOutpre:NR_Pt?query
Returns the number of points for the DATa:SOUrce waveform that will be transmitted in response to a CURVe? query.
integer - The number of points for the DATa:SOUrce waveform that will be transmitted in response to a CURVe? query.
:WFMOutpre:PT_Fmt?query
Returns the point format for the waveform specified by the DATa:SOUrce command. The format specifies equations describing how the preamble scale factors are used to interpret CURVe? data points.
enum - Returns the point format for the waveform specified by the DATa:SOUrce command.
WFMOUTPRE:PT_FMT? might return WFMOutpre:PT_Fmt ENV, indicating that the waveform data is a series of min-max pairs.
:WFMOutpre:PT_Off?query
Returns the trigger point relative to DATa:STARt for the waveform specified by the DATa:SOUrce command. The returned value is the point immediately following the actual trigger.
integer - The trigger point relative to DATa:STARt for the selected waveform.
:WFMOutpre:PT_ORder?query
Queries whether the source waveform is a Fast Acquisition waveform. Returns whether waveform points are transmitted in row order or linear order.
enum - Returns Row if the source is a Fast Acquisition waveform, or Linear if it is not.
WFMOUTPRE:PT_ORDER? might return WFMOUTPRE:PT_ORder ROW, specifying that the waveform designated by the DATa:SOUrce waveform is a Fast Acquisition waveform and CURve? is returning the PIXmap data for that source.
:WFMOutpre:RESampleset / query
Sets or queries the resampling of outgoing waveform data. It is equivalent to setting DATa:RESample, and changes are reflected in the corresponding DATa value.
| Name | Type | Values | Description |
|---|---|---|---|
| NR1 | integer | - | Resampling value. |
:WFMOutpre:RESample?query
Sets or queries the resampling of outgoing waveform data. It is equivalent to setting DATa:RESample, and changing one updates the other.
integer - Returns the resampling setting for outgoing waveform data.
:WFMOutpre:SPAN?query
Returns the frequency span of the outgoing waveform. The span is the range of frequencies you can observe around the center frequency.
real (Hz) - Returns the frequency span of the outgoing waveform, in Hertz.
RF:SPAN? might return RF:SPAN 10.0000E+6, indicating the span is 10 MHz.
:WFMOutpre:WFId?query
Returns a string describing several aspects of the acquisition parameters for the waveform specified by DATa:SOUrce. An error is reported if the referenced waveform does not exist.
string - A string containing comma-separated fields that describe the waveform acquisition parameters, including source, coupling, vertical and horizontal scale, record length, acquisition mode, center frequency, span, and reference level.
:WFMOutpre:WFMTYPe?query
Returns the type of the outgoing waveform. ANALOG indicates a Channel or Math waveform, SV_FD indicates a Spectrum View RF frequency-domain waveform, and RF_TD indicates an RF time-domain waveform.
enum - Returns the type of the outgoing waveform.
:WFMOutpre:XINcr?query
Returns the horizontal point spacing in units of WFMOutpre:XUNit for the waveform specified by DATa:SOUrce. This value corresponds to the sampling interval.
real - The horizontal point spacing for the selected waveform, in units of WFMOutpre:XUNit.
:WFMOutpre:XUNit?query
Returns the horizontal units for the waveform specified by the DATa:SOUrce command. An error is reported if the DATa:SOUrce waveform does not exist.
enum - Returns the horizontal units for the waveform specified by the DATa:SOUrce command.
WFMOUTPRE:XUNIT? might return WFMOUTPRE:XUNIT "HZ", indicating that the horizontal units for the waveform are in Hertz.
:WFMOutpre:XZEro?query
Returns the sub-sample time between the trigger sample (designated by PT_OFF) and the actual trigger occurrence for the waveform selected by DATa:SOUrce. The value is reported in the units returned by WFMOutpre:XUNit?.
real - Sub-sample trigger time offset for the selected waveform, in the waveform's horizontal units.
WFMOUTPRE:XZERO? might return WFMOUTPRE:XZERO 5.6300E-9, indicating that the trigger actually occurred 5.63 ns before the trigger sample.
:WFMOutpre:YMUlt?query
Returns the vertical scale factor per digitizing level for the waveform specified by DATa:SOUrce, in units specified by WFMOutpre:YUNit. For non-floating-point formats, the value accounts for the binary point location implied by WFMOutpre:BYT_Nr.
real - Vertical scale factor per digitizing level for the waveform specified by DATa:SOUrce.
WFMOUTPRE:YMULT? might return WFMOUTPRE:YMULT 4.0000E-3, indicating that the vertical scale for the corresponding waveform is 100 mV/div.
:WFMOutpre:YOFf?query
Returns the vertical offset of the source specified by DATa:SOUrce. For this instrument family, the value returned is always 0.0 as the offset is combined with the :YZEro value.
real - Returns the vertical offset of the source specified by DATa:SOUrce; for this instrument family, the returned value is always 0.0.
WFMOUTPRE:YOFF? might return WFMOUTPRE:YOFF -50.0000E+0, indicating that the position indicator for the waveform was 50 digitizing levels (2 divisions) below center screen.
:WFMOutpre:YUNit?query
Returns the vertical units for the waveform specified by DATa:SOUrce. An error is reported if the DATa:SOUrce waveform does not exist.
string - Returns the vertical units for the waveform specified by DATa:SOUrce.
:WFMOutpre:YZEro?query
Returns the combined vertical position and offset for the source waveform specified by DATa:SOUrce. If the waveform does not exist, an error is reported.
real - Combined vertical position and offset for the source waveform specified by DATa:SOUrce.
WFMOUTPRE:YZERO? might return WFMOUTPRE:YZERO -100.0000E-3, indicating that vertical offset is set to -100 mV.
:DESEset / query
Enables and disables bits in the Device Event Status Enable Register (DESER). The DESER bits correspond to those in the SESR, and the register controls which types of events are reported to the SESR and the Event Queue.
| Name | Type | Values | Description |
|---|---|---|---|
| bits | integer | 0 - 255 | Bits to set in the DESER. |
:DESE?query
Reads the Device Event Status Enable Register (DESER). The DESER controls which types of events are reported to the SESR and the Event Queue, and its bits correspond to those in the SESR.
integer - Returns the contents of the DESER register.
:EVENT?query
Returns the next event number from the Event Queue. Reading an event removes it from the queue.
integer - Returns only the event number.
:BUSY?query
Returns the status of operations. A return value of 1 means there are pending operations, and 0 means all pending operations are complete.
integer - Returns 1 when there are pending operations, or 0 when all pending operations are complete.
:FACtoryset / query
Performs the factory operation supported by Operation Complete synchronization.
:RF:REFLevelset / query
Sets the RF reference level. This command is one of the operations that can generate an Operation Complete event.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | AUTO | RF reference level mode. |
:TEKSecureset / query
Synchronizes the instrument by waiting for completion of pending operations that generate an OPC message. When all such operations are complete, no commands after TEKSecure are processed until the OPC message(s) are generated.
:CH1:AMPSVIAVOLTS:ENABLEset / query
Enables or disables the amps-via-volts function on channel 1. The factory default is 0.
:CH1:AMPSVIAVOLTS:FACTORset / query
Sets the amps-via-volts scaling factor for channel 1. The factory default is 10.0000.
:CH1:BANDWIDTHset / query
Sets the bandwidth limit for channel 1. The factory default is 1.0000E+9.
| Name | Type | Values | Description |
|---|---|---|---|
| bandwidth | real | Hz | Bandwidth limit for CH1. |
:CH1:COUPLINGset / query
Sets the coupling mode for channel 1. The factory default is DC.
| Name | Type | Values | Description |
|---|---|---|---|
| coupling | enum | DC | Coupling mode. |
:CH1:DESKEWset / query
Sets the deskew value for channel 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| deskew | real | - | Deskew adjustment for CH1. |
:CH1:INVERTset / query
Inverts the displayed waveform for channel 1. Factory default is 0.
:CH1:LABELset / query
Sets or shows the label for channel 1. The factory default is an empty string.
CH1:LABEL
:CH1:OFFSETset / query
Sets the vertical offset for channel 1. The factory default is 0.0E+0.
:CH1:POSITIONset / query
Sets the vertical position of channel 1. The factory default is 0.0E+0.
:CH1:PROBE:FORCEDRANGEset / query
Factory default value for the forced probe range on channel 1.
:CH1:PROBE:GAINset / query
Sets the probe gain for channel 1. The factory default is 1.0000.
:CH1:PROBE:PROPDELAYset / query
Sets the probe propagation delay for channel 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| propdelay | real | - | Probe propagation delay. |
:CH1:SCALEset / query
Sets the vertical scale for channel 1. The factory default is 100.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | V | Vertical scale setting for CH1. |
:CH1:TERMINATIONset / query
Sets the input termination for CH1. The factory default value is 1.0000E+6.
| Name | Type | Values | Description |
|---|---|---|---|
| termination | real | ohm | Input termination resistance for channel 1. |
:CH1:YUNITSset / query
Sets the vertical units for channel 1. The factory default is "V".
| Name | Type | Values | Description |
|---|---|---|---|
| yunits | string | - | Vertical units label for the channel. |
:CURSOR:FUNCTIONset / query
Sets or queries the cursor function state. The factory default is OFF.
enum - Returns the cursor function state.
:CURSOR:HBARS:POSITION1set / query
Sets the first horizontal cursor bar position. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| position1 | real | - | First horizontal cursor bar position. |
:CURSOR:HBARS:UNITSset / query
Sets the units used for horizontal cursor bar readout. The factory default is BASE.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | BASE | Units used for horizontal cursor bars. |
:CURSOR:MODEset / query
Sets the cursor mode. The factory default is INDEPENDENT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | INDEPENDENT | Cursor mode. |
:CURSOR:SOURCEset / query
Sets the cursor source to a specified channel or to AUTO. The factory default is AUTO.
| Name | Type | Values | Description |
|---|---|---|---|
| source | enum | AUTO | Selects the cursor source. |
:CURSOR:VBARS:POSITION1set / query
Sets the first vertical bars cursor position. Factory default is -12.00E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| position1 | real | - | First vertical bars cursor position. |
:CURSOR:VBARS:UNITSset / query
Sets the units used for vertical cursors. The factory default is SECONDS.
| Name | Type | Values | Description |
|---|---|---|---|
| units | enum | SECONDS | Units for the vertical cursor readout. |
:CURSOR:XY:READOUTset / query
Sets the XY cursor readout format. The factory default is RECTANGULAR.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | RECTANGULAR | XY cursor readout format. |
:CURSOR:XY:RECTANGULAR:X:POSITION1set / query
Sets the first X position for rectangular XY cursors.
| Name | Type | Values | Description |
|---|---|---|---|
| position1 | real | - |
:CURSOR:XY:RECTANGULAR:Y:POSITION1set / query
Sets the Y position of rectangular XY cursors. This page lists the factory default value.
| Name | Type | Values | Description |
|---|---|---|---|
| position1 | real | - | Y cursor position 1. |
:D10:LABELset / query
Sets the label for digital channel D10. The factory default label is an empty string.
| Name | Type | Values | Description |
|---|---|---|---|
| label | string | - | Label text for the digital channel. |
:D10:POSITIONset / query
Sets the default position for D10. The factory default value is 80.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Position setting for D10. |
:D10:THRESHOLDset / query
Sets the digital channel threshold. The factory default for D10:THRESHOLD is 1.4000.
:DESKEW:DISPLAYset / query
Sets the default display state for deskew. The factory default value is 1.
| Name | Type | Values | Description |
|---|---|---|---|
| state | integer | - | Display state value. |
:EMAIL:SETUP:FROMADDRESSset / query
Sets the sender email address used in email setup. The factory default is "TestString".
| Name | Type | Values | Description |
|---|---|---|---|
| fromaddress | string | - | Email address used as the sender address. |
:EMAIL:SETUP:HOSTALIASNAMEset / query
Sets the host alias name used in e-mail setup.
:EMAIL:SETUP:SMTPLOGINset / query
Sets the SMTP login name used for email setup. The factory default is "TestString".
| Name | Type | Values | Description |
|---|---|---|---|
| login | string | - | SMTP login name. |
:EMAIL:SETUP:SMTPPORTset / query
Sets the SMTP port used for e-mail setup. The factory default is 25.
| Name | Type | Values | Description |
|---|---|---|---|
| port | integer | 0 - 65535 | SMTP port number. |
:EMAIL:SETUP:SMTPSERVERset / query
Sets the SMTP server string used for email setup. The factory default is "TestString".
| Name | Type | Values | Description |
|---|---|---|---|
| server | string | - | SMTP server name or address. |
:FASTACQ:STATEset / query
Sets or queries the fast acquisition state. The factory default is 0.
:MARKER:M1:FREQUENCY:ABSOLUTEset / query
Sets the absolute frequency for marker M1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| frequency | real | Hz | Absolute frequency value for marker M1. |
:MARKER:MANUALset / query
Sets the manual marker position/value. The factory default is 0.
| Name | Type | Values | Description |
|---|---|---|---|
| value | integer | - | Manual marker setting. |
:MARKER:PEAK:EXCURSIONset / query
Sets the peak excursion used by the marker peak search. The factory default value is 30.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| excursion | real | - | Peak excursion value. |
:MARKER:PEAK:MAXIMUMset / query
Sets the peak-marker maximum count. The factory default is 5.
:MARKER:PEAK:STATEset / query
Sets the peak marker state. Factory default is 1.
:MARKER:PEAK:THRESHOLDset / query
Sets the peak marker threshold. The factory default value is -50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| threshold | real | - | Peak marker threshold value. |
:MARKER:TYPEset / query
Sets the marker type used by the instrument. The factory default is ABSOLUTE.
| Name | Type | Values | Description |
|---|---|---|---|
| type | enum | ABSOLUTE | Marker type. |
:MATHVAR:VAR1set / query
Factory default value for VAR1 in the MATHVAR subsystem.
:MESSAGE:BOXset / query
Sets the message box location and size. The factory default is 167,67,167,83.
| Name | Type | Values | Description |
|---|---|---|---|
| position/size | integer | - | Four comma-separated numeric values defining the message box coordinates and dimensions. |
:MESSAGE:SHOWset / query
Sets the message shown in the on-screen message box. The factory default is an empty string.
| Name | Type | Values | Description |
|---|---|---|---|
| message | string | - | Text to display in the message box. |
:MESSAGE:STATEset / query
Sets or queries the state of the message display. The factory default is 0.
:PICTBRIDGE:DATEPRINTset / query
Sets the PictBridge date-print setting. The factory default is DEFLT.
| Name | Type | Values | Description |
|---|---|---|---|
| mode | enum | DEFLT | Date print setting. |
:PICTBRIDGE:IDPRINTset / query
Controls whether the PictureBridge ID is printed. The factory default is OFF.
:PICTBRIDGE:IMAGESIZEset / query
Sets the image size used by PictBridge printing. The factory default is DEFLT.
| Name | Type | Values | Description |
|---|---|---|---|
| size | enum | DEFLT | Image size setting. |
:PICTBRIDGE:PAPERSIZEset / query
Sets the PictBridge paper size. The factory default is DEFLT.
:PICTBRIDGE:PAPERTYPEset / query
Sets the paper type used for PictBridge printing. The factory default is DEFLT.
| Name | Type | Values | Description |
|---|---|---|---|
| paper type | enum | DEFLT | Paper type for PictBridge printing. |
:PICTBRIDGE:PRINTQUALset / query
Sets the print quality used for PictBridge printing. The factory default is DEFLT.
:REF1:set / query
Sets the default horizontal delay time for REF1. The factory default value shown for REF1 is 4.0000E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Horizontal delay time for REF1. |
:REF1:HORIZONTAL:DELAY:TIMEset / query
Sets the horizontal delay time for REF1. The factory default is 16.0000E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| time | real | s | Horizontal delay time for REF1. |
:REF1:VERTICAL:POSITIONset / query
Sets the vertical position of reference waveform 1. The factory default is 0.0E+0.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Vertical position setting for the reference waveform. |
:REF1:VERTICAL:SCALEset / query
Sets the vertical scale for reference waveform 1. The factory default is 100.0000E-3.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | - | Vertical scale setting for the reference waveform. |
Sets the CAN data offset for the specified search trigger bus. The manual lists a factory default of 0.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search number index. |
| x | integer | - | Bus number index. |
| offset | integer | 0 | CAN data offset. |
:SEARCH<x>:TRIGGER:A:BUS:B<x>:CAN:FD:BRSBITset / query
Sets the CAN FD BRS bit search condition for the specified search and bus index. The factory default for this setting is X.
| Name | Type | Values | Description |
|---|---|---|---|
| x | integer | - | Search and bus index placeholder. |
:SEARCH<x>:TRIGGER:A:BUS:B<x>:CAN:FD:ESIBITset / query
Sets the CAN FD ESI bit search criterion for the selected bus search. The factory default is X.
| Name | Type | Values | Description |
|---|---|---|---|
| x | enum | X | Bus search identifier. |
:VIDPIC:AUTOCONTRASTset / query
Sets or returns the auto-contrast state for video picture display. The factory default is 1.
:VIDPIC:AUTOCONTRAST:UPDATERATEset / query
Sets the video picture auto-contrast update rate. Factory default is 20.
| Name | Type | Values | Description |
|---|---|---|---|
| rate | integer | - | Update rate for auto-contrast. |
:ZOOM:MODEset / query
Sets the zoom mode default state.
:ZOOM:ZOOM1:POSITIONset / query
Sets the horizontal position of ZOOM1. The factory default is 50.0000.
| Name | Type | Values | Description |
|---|---|---|---|
| position | real | - | Horizontal position of the ZOOM1 window. |
:ZOOM:ZOOM1:SCALEset / query
Sets the scale for Zoom 1. The factory default value is 4.0000E-6.
| Name | Type | Values | Description |
|---|---|---|---|
| scale | real | - | Zoom 1 scale. |
:ZOOM:ZOOM1:STATEset / query
Turns the ZOOM1 view on or off.
:*OPC?query
Waits for the preceding operation to complete before continuing. In the example, it is used after *RST to wait for the reset or autoset operation to finish.
boolean - Returns 1 when all pending selected device operations have completed.
*RST;:*OPC? *OPC?
:RSTset / query
Resets the instrument. Wait for the reset to complete.
*RST