×
Binho with BootLoop
Drive I3C, I2C, SPI, and UART buses and emulate peripherals from every BootLoop test with Binho’s USB host adapters.
Integration
How they work together
Binho support is built into the BootLoop framework, fully automating I3C, I2C, SPI, and UART transactions through Binho’s multi-protocol USB host adapters, so tests can drive buses and emulate peripherals directly. With BootLoop and Binho, you can exercise every bus interface during board bring-up, firmware development, CI, and end-of-line testing.
Capabilities
What you get
Supernova: run I3C, I2C, SPI, and UART simultaneously on dedicated pins, plus 6 GPIO
MIPI I3C Basic v1.0, v1.1.1, and v1.2 at 12.5 MHz, with SDR and HDR-DDR, IBI, Hot-Join, and all CCCs, down to 0.8 V
Pulsar: I2C, SPI, UART, RS-485, 1-Wire, and CAN-FD in one USB host adapter
Controller and Target roles: drive a bus, or attach as a target to validate controllers and silicon
SPI up to 50 MHz, I2C up to 1 MHz, UART up to 2 Mbaud, and CAN-FD up to 5 Mbps
I3C Protocol Analyzer for bus capture and decode
Python SDK with Jupyter examples, plus C, C++, and C# SDKs for automated test frameworks
Getting started
Get started with Binho
Visit Binho to explore their host adapters, or book a demo to see BootLoop drive your buses on real hardware.
